DA1100-IN - Dantech Electronic Engineering

EN English
DA1100-IN
SecurePoE™ Multispan
within a mild steel security enclosure
Features
n
n
n
n
n
n
n
n
n
Integrated 5-Port Gigabit network switch for 10/100/1000Mbs
PoE+ power injector with 1, 2 or 4 load output ports
30W of load power availability per port, to IEEE 802.3:2012
90-270V AC, 47-63Hz universal mains input
Ultra high efficiency operation - up to 96% (tested with 120W load)
Safe power supply design
System power status LED & monitoring contacts
Individual port power status LEDs and monitoring contacts
Monitoring relay contacts can be used for analogue or network interface
(e.g. AVIs, alarm logs, device alarm inputs; or triggering ancillary equipment)
n Innovative fast entry cable system
n Additional cable entry knock-outs
n Secure steel enclosure
n Lid tamper switch
n Automatic load class detection
n Designed for ease of fitting and high reliability
Description
A power over Ethernet Multispan power supply with secure enclosure and monitoring. Every SecurePoE unit
complies with the IEEE 802.3:2012 standard (IEEE 802.3at/IEEE 802.3af). SecurePoE units will provide the full 30W
of power to every port. All units are housed in secure tamper protected cases.
The PoE outputs have LED indication to show if a compatible device is connected and powered. In addition there
are SPCO clean contacts for monitoring the power status of each output.
PoE Multispan devices combine the reliability of a midspan with the ease of an endspan unit, while adding security
and installation flexibility.
The pre-patched network switch allows one data connection (e.g. from network) to be connected to up to 4 PoE
powered devices.
Multispan units can be located 100 meters away from existing network infrastructure and attached devices can be a
further 100 meters, giving 200m connectivity potential.
The enclosed information is believed to be correct. Information may change ‘without notice’ due to product improvement. Users should ensure that the product is suitable for their use. E&OE. Registered Proprietor:
Benham (General Engineers) Ltd (No. 1181752) Registered at 3 Galliford Road Industrial Estate, Heybridge, Maldon, Essex CM9 4XD, UK. Directors: R.A.Scott, K.E.Horwood, T.J.Scott, N.J.Scott. VAT Reg. GB 282 7627 31
Tel:+44(0)1621 856 850 Fax: +44(0)1621 856 162 sales@dantech.uk.com
Indoor wall mount
Exterior wall mount
19” Rack-mount
1 x 30W PoE+ injector
DA1000-IN-1
DA1000-EX-1
-
2 x 30W PoE+ injector
DA1000-IN-2
DA1000-EX-2
-
4 x 30W PoE+ injector
DA1000-IN-4
DA1000-EX-4
DA1000-RM-4
Standard (Non-battery)
8 x 30W PoE+ injector
-
-
DA1000-RM-8
1 x 30W Gigabit PoE+ injector
DA1000-IN-1-G
DA1000-EX-1-G
-
2 x 30W Gigabit PoE+ injector
DA1000-IN-2-G
DA1000-EX-2-G
-
4 x 30W Gigabit PoE+ injector
DA1000-IN-4-G
DA1000-EX-4-G
DA1000-RM-4-G
-
-
DA1000-RM-8-G
1 x 30W Gigabit PoE+ injector & 5-Port Gigabit switch
8 x 30W Gigabit PoE+ injector
DA1100-IN-1-G
DA1100-EX-1-G
-
2 x 30W Gigabit PoE+ injector & 5-Port Gigabit switch
DA1100-IN-2-G
DA1100-EX-2-G
-
4 x 30W Gigabit PoE+ injector & 5-Port Gigabit switch
DA1100-IN-4-G
DA1100-EX-4-G
DA1100-RM-4-G
1 x 30W PoE+ injector
DA1001-IN-1
DA1001-EX-1
-
2 x 30W PoE+ injector
DA1001-IN-2
DA1001-EX-2
-
4 x 30W PoE+ injector
DA1001-IN-4
DA1001-EX-4
DA1001-RM-4
Battery maintained 1.2Ah
8 x 30W PoE+ injector
-
-
DA1001-RM-8
1 x 30W Gigabit PoE+ injector
DA1001-IN-1-G
DA1001-EX-1-G
-
2 x 30W Gigabit PoE+ injector
DA1001-IN-2-G
DA1001-EX-2-G
-
4 x 30W Gigabit PoE+ injector
DA1001-IN–4-G
DA1001-EX-4-G
DA1001-RM-4-G
-
-
DA1001-RM-8-G
1 x 30W Gigabit PoE+ injector & 5-Port Gigabit switch
8 x 30W Gigabit PoE+ injector
DA1101-IN-1-G
DA1101-EX-1-G
-
2 x 30W Gigabit PoE+ injector & 5-Port Gigabit switch
DA1101-IN-2-G
DA1101-EX-2-G
-
4 x 30W Gigabit PoE+ injector & 5-Port Gigabit switch
DA1101-IN-4-G
DA1101-EX-4-G
DA1101-RM-4-G
DA1001-IN-BATT
DA1001-EX-BATT
DA1001-RM-BATT
1 x 30W PoE+ injector
DA1007-IN-1
DA1007-EX-1
-
2 x 30W PoE+ injector
DA1007-IN-2
DA1007-EX-2
-
4 x 30W PoE+ injector
DA1007-IN-4
DA1007-EX-4
DA1007-RM-4
Replacement battery pack part code:
Battery maintained 7Ah
8 x 30W PoE+ injector
-
-
DA1007-RM-8
1 x 30W Gigabit PoE+ injector
DA1007-IN-1-G
DA1007-EX-1-G
-
2 x 30W Gigabit PoE+ injector
DA1007-IN-2-G
DA1007-EX-2-G
-
4 x 30W Gigabit PoE+ injector
DA1007-IN-4-G
DA1007-EX-4-G
DA1007-RM-4-G
-
-
DA1007-RM-8-G
1 x 30W Gigabit PoE+ injector & 5-Port Gigabit switch
8 x 30W Gigabit PoE+ injector
DA1107-IN-1-G
DA1107-EX-1-G
-
2 x 30W Gigabit PoE+ injector & 5-Port Gigabit switch
DA1107-IN-2-G
DA1107-EX-2-G
-
4 x 30W Gigabit PoE+ injector & 5-Port Gigabit switch
DA1107-IN-4-G
DA1107-EX-4-G
DA1107-RM-4-G
DA1007-IN-BATT
DA1007-EX-BATT
DA1007-RM-BATT
1 x 30W PoE+ injector
DA1010-IN-1
DA1010-EX-1
-
2 x 30W PoE+ injector
DA1010-IN-2
DA1010-EX-2
-
4 x 30W PoE+ injector
DA1010-IN-4
DA1010-EX-4
DA1010-RM-4
Replacement battery pack part code:
Battery maintained 10Ah
8 x 30W PoE+ injector
-
-
DA1010-RM-8
1 x 30W Gigabit PoE+ injector
DA1010-IN-1-G
DA1010-EX-1-G
-
2 x 30W Gigabit PoE+ injector
DA1010-IN-2-G
DA1010-EX-2-G
-
4 x 30W Gigabit PoE+ injector
DA1010-IN-4-G
DA1010-EX-4-G
DA1010-RM-4-G
-
-
DA1010-RM-8-G
1 x 30W Gigabit PoE+ injector & 5-Port Gigabit switch
8 x 30W Gigabit PoE+ injector
DA1110-IN-1-G
DA1110-EX-1-G
-
2 x 30W Gigabit PoE+ injector & 5-Port Gigabit switch
DA1110-IN-2-G
DA1110-EX-2-G
-
4 x 30W Gigabit PoE+ injector & 5-Port Gigabit switch
DA1110-IN-4-G
DA1110-EX-4-G
DA1110-RM-4-G
DA1010-IN-BATT
DA1010-EX-BATT
DA1010-RM-BATT
Replacement battery pack part code:
Product selection
Estimated system standby times
1. Select product mounting type:
§
§
Indoor wall mounting = “IN”
Exterior wall mounting = “EX”
19” rack mounting
= “RM”
2. Select number of 30W PoE ports
required
3. If battery standby is required, simply
select the appropriate battery pack
capacity from the table.
Battery capacity
Output load
1.2Ah
7Ah
10Ah
5W
12W
25W
50W
75W
100W
9 Hours
65 Hours
100 Hours
44 Hours
4 Hours
30 Hours
1.75 Hours
14.5 Hours
20 Hours
40 Minutes
6.5 Hours
9.5 Hours
23 Minutes
4 Hours
6 Hours
14 Minutes
2.75 Hours
4 Hours
(Use the power ratings for your PoE load devices to
determine your total system load requirement.)
The enclosed information is believed to be correct. Information may change ‘without notice’ due to product improvement. Users should ensure that the product is suitable
for their use. E&OE. Registered Proprietor: Benham (General Engineers) Ltd (No. 1181752) Registered at 3 Galliford Road Industrial Estate, Heybridge, Maldon, Essex
CM9 4XD, UK. Directors: R.A.Scott, K.E.Horwood, T.J.Scott, N.J.Scott. VAT Reg. GB 28276273 Tel:+44(0)1621 856 850 Fax:+44(0)1621 856 162 sales@dantech.uk.com
Download PDF
Similar pages