PXI/DAQ/DAQe-2000 Series
4-CH 14/16-Bit Up to 2 MS/s Simultaneous-Sampling Multi-Function DAQ Cards
Introduction
ADLINK's PXI/DAQ/DAQe-2000 series of products are simultaneous-sampling multi-function
DAQ cards to meet a wide range of application requirements. The devices can simultaneously
sample 4 AI channels with differential input configurations in order to achieve maximum noise
elimination. They also provide 2-CH 12-bit analog outputs with waveform generation capability,
which can be performed together with analog input functions. If more analog input or output
channels are required, multiple cards can be synchronized through the SSI (System Synchronization
Interface) bus. This makes the PXI/DAQ/DAQe-2000 series ideal for stimulus/response testing.
DAQ-2010
DAQe-2010
The PXI/DAQ/DAQe-2000 series also features analog and digital triggering, 24-CH programmable
digital I/O lines, and 2-CH 16-bit general-purpose timer/counter. The auto-calibration functions
adjust the gain and offset to within specified accuracies such that you do not have to adjust
trimpots to calibrate the cards.
PXI-2010
Features
■
■
■
■
■
■
■
■
■
■
■
■
■
Supports a 32-bit 3.3 V or 5 V PCI bus (DAQ-2000 series)
x1 lane PCI Express® Interface (DAQe-2000 series)
PXI specification Rev. 2.2 compliant (PXI-2000 series)
4-CH differential analog inputs
Bipolar or unipolar analog input ranges
Programmable gains of x1, x2, x4, x8
Scatter-gather DMA for both analog inputs and outputs
2-CH 12-bit multiplying analog outputs with waveform generation
24-CH TTL digital input/output
2-CH 16-bit general-purpose timer/counter
Analog and digital triggering
Fully auto calibration
Multiple cards synchronization through SSI (System
Synchronization Interface) bus or PXI trigger bus
Terminal Boards & Cables
■DIN-68S-01
Terminal Board with One 68-pin SCSI-II Connector and DIN-Rail Mounting (Cables are not included.)
■ACL-10568-1
68-pin SCSI-VHDCI cable (mating with
AMP-787082-7), 1 M
* For more information on mating cables, please refer to
P2-61/62.
■Operating Systems
• Windows 7/Vista/XP/2000/2003 Server
• Linux
■Recommended Software
• AD-Logger
• VB.NET/VC.NET/VB/VC++/BCB/Delphi
• DAQBench
■Driver Support
• DAQPilot for LabVIEW™
• DAQ-MTLB for MATLAB®
• D2K-DASK for Windows
• D2K-DASK/X for Linux
Terminal board DIN-68S-01 &
68-Pin SCSI-VHDCI cable ACL-10568-1
SSI Bus Cables
(for multiple cards synchronization)
■ACL-SSI-2/3/4
SSI Bus cable for two, three, and four devices
SSI bus cable for multiple card synchronization
(for DAQ/DAQe-2000 series)
Pin Assignment
Connector Pin Assignment
CH0+
1
35
CH0-
CH1+
2
36
CH1-
CH2+
3
37
CH2-
CH3+
4
38
CH3-
EXTATRIG
5
39
AIGND
DA1OUT
6
40
AOGND
DA0OUT
7
41
AOGND
AOEXTREF
8
42
AOGND
SDI3_1 / NC*
9
43
SDI3_0 / NC*
SDI2_1 / NC*
10
44
SDI2_0 / NC*
SDI1_1 / NC*
11
45
SDI1_0 / NC*
SDI0_1 / NC*
12
46
SDI0_0 / NC*
AO_TRIG_OUT
13
47
EXTWFTRG
AI_TRIG_OUT
14
48
EXTDTRIG
GPTC1_SRC
15
49
DGND
GPTC0_SRC
16
50
DGND
GPTC0_GATE
17
51
GPTC1_GATE
GPTC0_OUT
18
52
GPTC1_OUT
GPTC0_UPDOWN
19
53
GPTC1_UPDOWN
EXTTIMEBASE
20
54
DGND
AFI1
21
55
AFI0
PB7
22
56
PB6
PB5
23
57
PB4
PB3
24
58
PB2
PB1
25
59
PB0
PC7
26
60
PC6
PC5
27
61
PC4
DGND
28
62
DGND
PC3
29
63
PC2
PC1
30
64
PC0
PA7
31
65
PA6
PA5
32
66
PA4
PA3
33
67
PA2
PA1
34
68
PA0
*Pin 9-12 and pin 43-46 are SDI<0..3>_n
for 2010; NC for 2005, and 2006
2-13 www.adlinktech.com
High-Performance DAQ
1
Software &
Utilities
Ordering Information / Quick Selection Guide
Model Name
2
Analog Input
No. of
channels
Resolution
Analog Output
DIO
Timer/Counter
Sampling
rate
Input range
No. of
channels
Resolution
Update rate
No. of channels
No. of channels
PXI/DAQ/DAQe-2010
4-CH DI
14 bits
2 MS/s
±1.25 V to ±10 V
2
12 bits
1 MS/s
24-CH 8255 PIO
2-CH, 16-bit
PXI/DAQ/DAQe-2005
4-CH DI
16 bits
500 kS/s
±1.25 V to ±10 V
2
12 bits
1 MS/s
24-CH 8255 PIO
2-CH, 16-bit
PXI/DAQ/DAQe-2006
4-CH DI
16 bits
250 kS/s
±1.25 V to ±10 V
2
12 bits
1 MS/s
24-CH 8255 PIO
2-CH, 16-bit
Model Name
PXI/DAQ/DAQe-2010
PXI/DAQ/DAQe-2005
PXI/DAQ/DAQe-2006
16 bits, no missing codes
16 bits, no missing codes
Analog Input
Resolution
Number of channels
Maximum sampling rate
Programmable gain
Bipolar input ranges
±10 V, ±5 V, ±2.5 V, ±1.25 V
Unipolar input ranges
0-10 V, 0-5 V, 0-2.5 V, 0-1.25 V
Offset error
±3 mV
2 mV
±1 mV
Gain error
±0.1% of FSR
±0.04% of FSR
±0.03% of FSR
Input Coupling
Overvoltage protection
Input Impedance
CMRR (gain = 1)
85 dB
-3 dB small signal bandwidth (gain = 1)
1 MHz
Trigger sources
Trigger modes
FIFO buffer size
Data transfers
14 bits
4 simultaneous-sampling channels with differential input
2 MS/s
500 kS/s
250 kS/s
1, 2, 4, 8
DC
P
ower on: Continuous ±35 V, Power off: Continuous ±15 V
1 MHz
600 kHz
S
oftware, external digital/analog trigger, SSI bus
Pre-trigger, post-trigger, middle-trigger, delay-trigger, and repeated trigger
8 k samples
512 samples
512 samples
Polling, scatter-gather DMA
Number of channels
2 voltage outputs
Resolution
12 bits
Output ranges
0-10 V, ±10 V, 0-AOEXTREF, ±AOEXTREF
Maximum update rate
Slew rate
20 V/μs
Settling time
3 μs to ±0.5 LSB accuracy
Offset error
±3mV
±1mV
±1mV
Gain error
±0.05% of max. output
±0.04% of max. output
±0.04% of max. output
Driving capacity
Stabililty
Any passive load, up to 1500 pF
Trigger sources
Software, external digital/analog trigger, SSI bus
Trigger modes
Post-trigger, delay-trigger, and repeated trigger
FIFO buffer size
Data transfers
Programmed I/O, scatter-gather DMA
Number of channels
Resolution
Compatibility
Base clock available
16 bits
5 V/TTL
40 MHz , external clock up to 10 MHz
Data transfers
Auto Calibration
Onboard reference
Temperature drift
Stabililty
General Specifications
Connector
68-pin VHDCI-type female
Operating temperature
Storage temperature
0 to 55˚C
-20 to 70˚C
Humidity
Power requirements
11
Vision
12
Fanless
Embedded
Computers
160 mm x 100 mm (not including connectors) (PXI-2000 series)
175 mm x 107 mm (not including connectors) (DAQ-2000 series)
168 mm x 107 mm (not including connectors) (DAQe-2000 series)
+5 V 1.82 A typical (PXI/DAQ-2010)
+3.3 V 1.246 A, +12 V 0.448 A
typical (DAQe-2010)
5 to 95%, non-condensing
+5 V 2.04 A typical (PXI/DAQ-2005)
+3.3 V 1.03 A, +12 V 0.75 A
typical (DAQe-2005)
9
Communications
+5 V
±2 ppm/˚C
6 ppm/1000 Hrs
Real-time
Distributed
I/O
10
2
Dimensions
7
Remote I/O
2 k samples
Compatibility
6
PAC
5 mA
Timer/Counter
Number of channels
5
8
1 μs
8255 24-bit programmable input/output
5 V/TTL
Programmed I/O
Modular
Instruments
Motion
Control
1 GΩ/100 pF
Analog Output
PXI/PXIe
GPIB & Bus
Expansion
3
4
Specifications
Digital I/O
DAQ
13
+5 V 1.82 A typical (DAQ-2006)
+3.3 V 1.02 A, +12 V 0.67 A
typical (DAQe-2006)
cPCI &
Industrial
Computers
www.adlinktech.com 2-14
Mouser Electronics
Authorized Distributor
Click to View Pricing, Inventory, Delivery & Lifecycle Information:
3M:
CL-1
Download PDF
Similar pages