6 ACCESSORIES
PT-4iREX
INFRARED REPEATER WITH EXTERNAL IR SENSOR INPUT
SPECIFICATIONS
INPUT:
1 IR Receiver.
OUTPUTS:
4 IR emitters on 3.5mm mini connectors.
POWER SOURCE:
12VDC, 95mA.
DIMENSIONS:
6.22cm x 5.24cm x 2.41cm (2.45" x 2.06" x 0.95") W, D,
H.
WEIGHT:
0.15kg (0.55 lbs) approx.
ACCESSORIES:
Power Supply, 3.5mm to IR Emitter Control Cable (CA35/IRE-10).
DESCRIPTION
The PT-4iREX is an infrared signal repeater that can operate at distances
up to approximately 250 feet (75 meters). This model will allow the
extension of infrared signals in areas where there is no direct line-of-sight
for normal infrared signal operation.
Outputs - Four which can control up to 8 IR devices at cable distances
up to approximately 250 feet (75 meters).
Inputs - Built-in IR receiver and 3.5mm connector for external IR
receiver at cable distances up to about 100 feet (30 meters).
Optional External IR Receiver Cables - C-A35M/IRR-3 and CA35M/IRR-50.
Optional IR Emitter Cables - C-A35/IRE-10 single emitter (1 included)
& C-A35/2IRE-10 dual emitter.
Ultra Compact PicoTOOLS™
- 4 units can be rack mounted side-byside in a 1U rack space with the optional RK-4PT rack adapter.
Additional rack adapters with other configurations are also available.
© www.kramerelectronics.com 2008
Download PDF
Similar pages