ftp-639usl001/002 24v driven receipt, ticket printer 3” kiosk printer unit

24V DRIVEN RECEIPT, TICKET PRINTER
3” KIOSK PRINTER UNIT
FTP-639USL001/002
■ OVERVIEW
The FTP-639UCL/USL Series is 24V driven receipt printer unit
with cutter for 3 inch wide paper. The unit has our high-speed
FTP-639MCL mechanism, cutter and control board, with an
integrated paper feed and built-in paper guide section.
The receipt printer unit is most suitable for applications such as
POS, ATM, and receipt and ticket issuing printers for various
other equipment.
■ FEATURES
• Unit supported (mounting is easy)
• High speed printer (200mm / sec.)
• Auto cutter included
• Paper near end-detection function
• Paper presenter and collector
Y
R
A
N
I
M
I
L
E
R
P
• Up to 5 inch paper diameter
• Low power consumption
• Printer partial tilt function
■ DESIGNATION
Item
Part Number
Serial (RS-232C)
FTP-639USL001*1
USB
FTP-639USL002*2
Serial Interface
FTP-629Y301
USB Interface
TBA
Power for logic, head, motor
FTP-629Y601
Printer module interface
Cables
*1: Interface board is FTP-629DSL107
*2: Interface board is FTP-629DSL112
1
FTP-639USL001/002
■ SPECIFICATIONS
Item
Specifications
Part number
FTP-639USL001/002
Printing method
Thermal-sensitive line dot method
Dot structure
576 dots/line
Dot pitch (Horizontal)
0.125 mm (8 dots/mm)—Dot density
Dot pitch (Vertical)
0.125 mm (8 dots/mm)—Line feed pitch
Effective printing area
72 mm
Paper width
80 +0
-1 mm
Paper thickness
60 to 120 µm
Paper print length
50 to 250mm
Y
R
A
N
I
M
I
L
E
R
P
Cutting type
Full or partial
Number of columns
48 columns/line (12×24 dot font)
Maximum printing speed
1600 dotlines/s (200 mm/s)
Page mode
Low speed mode
40mm/sec
Middle speed mode
80mm/sec.
High speed mode
200 mm/sec.
Alphanumeric KANA: 159
International characters: 195
JIS KANJI (FTP-622DSL107, DSL112): approximately 6800
Character types
Character composition, dimensions
(H×W), Number of characters
Interface
Serial RS232C, USB
For head
Power supply
24 × 12 dots, (3.0 × 1.5 mm), 48 columns
24 × 24 dots, (3.0 × 3.0 mm), 24 columns
16 × 8 dots, (2.0 × 1.0 mm), 72 columns
16 × 16 dots, (2.0 × 2.0 mm), 36 columns
For print motor
24VDC ± 5%, Voltage
Current : average*1 ( ): Peak
TBA (4.06) A (at 200 mm/s printing speed, 25% printing ratio)
TBA (2.04) A (at 80 mm/s printing speed, 25% printing ratio)
TBA (1.03) A (at 40 mm/s printing speed, 25% printing ratio)
24VDC ± 5%, 1.0 A maximum
For conveyance motor
24VDC ± 5%, 1.0 A maximum
For cutter
24VDC ± 5%, 1.2 A maximum
For logic
5VDC ± 5%, 0.2 A maximum
Dimensions
136.5(W) × 162.5(D) × 107 (H) mm
Weight (mechanism, cutter, board, frame)
Approximately 1.5 kg
2
(Continued)
FTP-639USL001/002
(Continued)
Item
Mechanism
Pulse durability : 1 × 108 pulse/dot (using Fujitsu Components' standard
driving method)
Wear resistance: 100 km (at 25% printing ratio)
Cutter
500,000 cuts
Operating temperature
0˚C to +50°C
Operating humidity
20 to 85% RH (no condensation)
Storage temperature
–20˚C to +60°C (excluding paper)
Storage humidity
5 to 95% RH (no condensation)
Head temperature
By thermistor (applied energy control, abnormal temperature detection)
Paper out/Mark detect
By photointerrupter
Platen open
By microswitch
Expected life
Environmental
conditions
Detection
Specifications
Y
R
A
N
I
M
I
L
E
R
P
Near end paper
Recommended thermal sensitive paper
By mechanical switch
For front insertion use (80 mm width)
Recommended papers
· Oji Paper
· NIPPON Paper
· MITSUBISHI Paper Mills
Paper diameter
Standard
80mm
Extended (attachment)
120mm
: FTP-030P0701/P0102
: PD150R,PD160R-N,PD170R
: TF50KS-E,TF60KS-E,
TF50KS-E4
: P220VBB-1,AFP-233
*1: 24VDC, minimum head resistance.
■ FUNCTIONS
Item
Item
1.
Test print function
9.
Internal RAM abnormality detection
2.
Paper feed
10.
Cutter abnormality detection
3.
Paper out detection
11.
Mark detection
4.
Paper near end detection
12.
MCU operation abnormality detection
5.
Platen open detection
13.
Motor power saving
6.
Thermal head temperature abnormality detection 14.
Power supply disconnection protection
7.
Motor temperature detection
15.
Motor protection
8.
Voltage abnormality detection
16.
Thermal head protection
■ INTERFACE , COMMAND, OPTIONS
Please refer to the FTP-629DSL107 for the FTP-639USL001 and FTP-629DSL112 for the FTP-639USL002.
Interface command options, please see FTP-609 datasheet.
3
FTP-639USL001/002
■ DIMENSIONS
Integrated unit
Y
R
A
N
I
M
I
L
E
R
P
Note:
1. Nominal value
2. Distance from paper roll to enclosure must be 20mm for loading.
3. Basic reference line.
4
FTP-639USL001/002
5
Download PDF
Similar pages