QuickSpecs
HP E4210G Switch Series
Overview
Models
HP E4210-24G Switch
HP E4210-48G Switch
HP E4210-24G-PoE Switch
JF844A
JF845A
JF846A
Key features
Entry-level switching, enterprise-class features
Affordable price
Out-of-the-box plug-and-play simplicity
Access control lists for improved security
Energy efficient
Product overview
HP E4210G Switch Series are entry-level Gigabit Ethernet LAN switches with enterprise-class quality of service (QoS), security, and
management features, delivering high value for network administrators looking for an economical edge device. Available Power over
Ethernet (PoE) models are ideal for voice over IP and wireless networking installations, while non-PoE models are also available for
simple port expansion. Dual-personality ports allow flexibility, including the ability to add 10 Gigabit Ethernet capability. Setting them
apart from lower-end devices, the series switches support an industry-standard command-line interface, Web-based administration,
and SNMP management. In addition, they support Intelligent Resilient Framework (IRF) stacking of up to four units.
Features and benefits
Quality of Service (QoS)
Layer 4 prioritization:
prioritization enables prioritization based on TCP/UDP port numbers
Traffic prioritization (IEEE 802.1p): allows real-time traffic classification into eight priority levels mapped to eight queues
Class of Service (CoS): sets the IEEE 802.1p priority tag based on IP address, IP Type of Service (ToS), Layer 3 protocol,
TCP/UDP port number, source port, and DiffServ
Rate limiting:
limiting sets per-port ingress enforced maximums and per-port, per-queue guaranteed minimums
Bandwidth shaping:
shaping
Rate limiting: provides per-port, ingress-based enforced bandwidth maximums
Guaranteed minimums: provides per-port, per-queue egress-based guaranteed bandwidth minimums
Broadcast control:
control allows limitation of broadcast traffic rate to cut down on unwanted broadcast traffic on the network
Management
Remote configuration and management:
management is available through a secure Web browser or a command-line interface (CLI)
Manager and operator privilege levels:
levels enable read-only (operator) and read-write (manager) access on CLI and Web
browser management interfaces
Management VLAN:
VLAN segments traffic to and from management interfaces, including CLI/telnet, a Web browser interface, and
SNMP
RADIUS accounting support:
support separates RADIUS accounting server support per SSID; provides detailed session, usage, and
billing information for each client activity
Multiple configuration files:
files can be stored to the flash image
Dual flash images:
images provide independent primary and secondary operating system files for backup while upgrading
Secure Web GUI:
GUI provides a secure, easy-to-use graphical interface for configuring the module via HTTPS
DA - 13792
North America — Version 4 — September 29, 2011
Page 1
QuickSpecs
HP E4210G Switch Series
Overview
Command-line interface (CLI): provides a secure, easy-to-use command-line interface for configuring the module via SSH or
a switch console; provides direct real-time session visibility
SNMPv1, v2c, and v3:
v3 facilitate centralized discovery, monitoring, and secure management of networking devices
Port mirroring:
mirroring enables traffic on a port to be simultaneously sent to a network analyzer for monitoring
Connectivity
Optional 10 Gigabit Ethernet ports:
ports allow the addition of 10 Gigabit Ethernet connections for uplinks or high-bandwidth
server connections; flexibly supports XFP, SFP+, or CX4 local connections
Auto-MDIX:
Auto-MDIX automatically adjusts for straight-through or crossover cables on all 10/100 and 10/100/1000 ports
Dual-personality functionality:
functionality includes four 10/100/1000 ports or SFP slots for optional fiber connectivity such as GigabitSX, -LX, -LH, or 100-FX
IEEE 802.3af Power over Ethernet (PoE): provides up to 15.4 W per port to IEEE 802.3af-compliant PoE-powered devices
such as IP phones, wireless access points, and security cameras
Manageability
RMON (remote monitoring): provides advanced monitoring and reporting capabilities for statistics, history, alarms, and events
Dual flash images:
images provides independent primary and secondary operating system files for backup while upgrading
Full-featured console:
console provides complete control of the switch with a familiar command-line interface (CLI)
Web interface:
interface allows configuration of the switch from any Web browser on the network
Multiple configuration files:
files allow multiple configuration files to be stored to flash image
Software updates:
updates free downloads from the Web
Virtual stacking capability:
capability single IP address management for a virtual stack of up to 255 Comware-based 3Com legacy
devices, including HP E4XXX and E55XX series switches
IEEE 802.1AB Link Layer Discovery Protocol (LLDP): automated device discovery protocol provides easy mapping using
network management applications
sFlow (RFC 3176): wire-speed traffic accounting and monitoring
Advanced IRF technology stacking:
stacking locally connects up to four E4210G switches using 10 Gigabit Ethernet or CX4 local
connections; improves resiliency by spreading aggregated links across multiple stacked units; provides simplified management
with single IP management and a unified control interface per stack
Layer 2 switching
VLAN support and tagging:
tagging support IEEE 802.1Q, with 4094 simultaneous VLAN IDs
GARP VLAN Registration Protocol (GVRP): allows automatic learning and dynamic assignment of VLANs
IP multicast snooping and data-driven IGMP:
IGMP automatically prevents flooding of IP multicast traffic
Jumbo packet support:
support supports up to 9220-byte frame size to improve performance of large data transfers
IEEE 802.1ad QinQ:
QinQ increases the scalability of an Ethernet network by providing a hierarchical structure; connects multiple
LANs on a high-speed campus or metro network
Layer 3 routing
Static IP routing:
routing provides manually configured Layer 3 routing
Security
Access control lists (ACLs): provide IP Layer 3 filtering based on source/destination IP address/subnet and source/destination
TCP/UDP port number
RADIUS/TACACS+:
RADIUS/TACACS+ eases switch management security administration by using a password authentication server
Secure Shell (SSHv2): encrypts all transmitted data for secure, remote command-line interface (CLI) access over IP networks
Secure Web management with HTTPS and SSL:
SSL encrypts all HTTP traffic, allowing secure access to the browser-based
management GUI in the switch
DA - 13792
North America — Version 4 — September 29, 2011
Page 2
QuickSpecs
HP E4210G Switch Series
Overview
IEEE 802.1X and RADIUS network logins:
logins control port-based access for authentication and accountability
Secure File Transfer Protocol (FTP): allows secure file transfer to and from the switch; protects against unwanted file
downloads or unauthorized copying of switch configuration file
Port security:
security allows access only to specified MAC addresses, which can be learned or specified by the administrator
MAC address lockout:
lockout prevents particular configured MAC addresses from connecting to the network
Switch management logon security:
security can require either RADIUS or TACACS+ authentication for secure switch CLI logon
Secure management access:
access securely encrypts all access methods (CLI, GUI, or MIB) through SSHv2, SSL, and/or SNMPv3
Custom banner:
banner displays security policy when users log in to the switch
Automatic VLAN assignment:
assignment automatically assigns users to the appropriate VLAN based on their identity and location and
the time of day
Management password:
password provides security so that only authorized access to the Web browser interface is allowed
STP BPDU port protection:
protection blocks Bridge Protocol Data Units (BPDUs) on ports that do not require BPDUs, preventing forged
BPDU attacks
Dynamic IP lockdown:
lockdown works with DHCP protection to block traffic from unauthorized hosts, preventing IP source address
spoofing
DHCP protection:
protection blocks DHCP packets from unauthorized DHCP servers, preventing denial-of-service attacks
Dynamic ARP protection:
protection blocks ARP broadcasts from unauthorized hosts, preventing eavesdropping or theft of network data
STP Root Guard:
Guard protects root bridge from malicious attack or configuration mistakes
Convergence
IEEE 802.1AB Link Layer Discovery Protocol (LLDP): is an automated device discovery protocol for easy mapping by network
management applications
Automated voice VLAN assignment:
assignment recognizes IP phones and automatically assigns voice traffic to a dedicated VLAN for IP
phones
Warranty and support
Lifetime warranty:
warranty for as long as you own the product with advance replacement and next-business-day delivery (available in
most countries)*
Electronic and telephone support:
support limited electronic and telephone support is available from HP; refer to:
www.hp.com/networking/warranty for details on the support provided and the period during which support is available
Software releases:
releases refer to: www.hp.com/networking/warranty for details on the software releases provided and the period
during which software releases are available for your product(s)
* Hardware warranty replacement for as long as you own the product, with next business day advance replacement (available in
most countries) with a five-year hardware warranty replacement for the disk drive included with HP AllianceONE Services zl Module,
HP Threat Management Services zl Module, HP PCM+ Agent with AllianceONE Services zl Module, and HP E-MSM765 zl Mobility
Controller. For details, refer to the HP Software License, Warranty, and Support booklet at: www.hp.com/networking/warranty.
DA - 13792
North America — Version 4 — September 29, 2011
Page 3
QuickSpecs
HP E4210G Switch Series
Technical Specifications
HP E4210-24G Switch (JF844A)
20 RJ-45 autosensing 10/100/1000 ports (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type 100BASE-TX,
Ports
IEEE 802.3ab Type 1000BASE-T); Media Type: Auto-MDIX; Duplex: 10BASE-T/100BASE-TX: half or full;
1000BASE-T: full only
4 dual-personality 10/100/1000 ports (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type 100BASE-TX,
IEEE 802.3ab Type 1000BASE-T)
1 RJ-45 serial console port
Supports a maximum of 4 10-GbE ports
11.8(d) x 17.4(w) x 1.7(h) in. (29.97 x 44.2 x 4.32 cm) (1U height)
Physical characteristics
Dimensions
9.0 lb. (4.08 kg)
Weight
Memory and processor
Processor
Broadcom 5836 @ 264 MHz, 16 MB flash, 64 MB RAM; packet buffer size:
.75 MB
Mounting
Mounts in an EIA standard 19-in. telco rack or equipment cabinet (hardware included)
Performance
Throughput
up to 95.2 million pps
128 Gbps
Routing/Switching
capacity
32 entries
Routing table size
Environment
32°F to 104°F (0°C to 40°C)
Operating temperature
10% to 95%, noncondensing
Operating relative
humidity
14°F to 158°F (-10°C to 70°C)
Nonoperating/Storage
temperature
10% to 95%, noncondensing
Nonoperating/Storage
relative humidity
Electrical characteristics Voltage
100-240 VAC
50 / 60 Hz
Frequency
Safety
UL 60950-1:2003; CSA 22.2 60950-1:2003; IEC 60950-1:2001; EN 60950-1:2001
Emissions
VCCI Class A; EN 55022 Class A; EN 55024; ICES-003 Class A
Management
IMC - Intelligent Management Center; command-line interface; Web browser; out-of-band management
(serial RS-232C); SNMP Manager; Telnet; IEEE 802.3 Ethernet MIB
Services
Refer to the HP website at: www.hp.com/networking/services for details on the service-level descriptions
and product numbers. For details about services and response times in your area, please contact your
local HP sales office.
Standards and protocols General protocols
(applies to all products in IEEE 802.1ag Service Layer OAM
series)
IEEE 802.1D MAC Bridges
IEEE 802.1p Priority
IEEE 802.1Q VLANs
IEEE 802.1s (MSTP)
IEEE 802.1s Multiple Spanning Trees
IEEE 802.1v VLAN classification by Protocol and Port
IEEE 802.1w Rapid Reconfiguration of Spanning Tree
IEEE 802.1X PAE
IEEE 802.3ad Link Aggregation (LAG)
IEEE 802.3ad Link Aggregation Control Protocol (LACP)
DA - 13792
North America — Version 4 — September 29, 2011
Page 4
QuickSpecs
HP E4210G Switch Series
Technical Specifications
IEEE 802.3ae 10-Gigabit Ethernet
IEEE 802.3i 10BASE-T
IEEE 802.3x Flow Control
IEEE 802.3z 1000BASE-X
RFC 768 UDP
RFC 792 ICMP
RFC 793 TCP
RFC 826 ARP
RFC 854 TELNET
RFC 951 BOOTP
RFC 1350 TFTP Protocol (revision 2)
RFC 1519 CIDR
RFC 1542 BOOTP Extensions
RFC 2131 DHCP
RFC 3576 Ext to RADIUS (CoA only)
RFC 4675 RADIUS VLAN & Priority
MIBs
IEEE 8021-PAE-MIB
IEEE 8023-LAG-MIB
RFC 1213 MIB II
RFC 1493 Bridge MIB
RFC 1757 Remote Network Monitoring MIB
RFC 1907 SNMPv2 MIB
RFC 2011 SNMPv2 MIB for IP
RFC 2013 SNMPv2 MIB for UDP
RFC 2096 IP Forwarding Table MIB
RFC 2233 Interfaces MIB
RFC 2273 SNMP-NOTIFICATION-MIB
RFC 2452 IPV6-TCP-MIB
RFC 2454 IPV6-UDP-MIB
RFC 2465 IPv6 MIB
RFC 2466 ICMPv6 MIB
RFC 2571 SNMP Framework MIB
RFC 2572 SNMP-MPD MIB
RFC 2573 SNMP-Notification MIB
RFC 2574 SNMP USM MIB
RFC 2613 SMON MIB
RFC 2618 RADIUS Client MIB
RFC 2620 RADIUS Accounting MIB
RFC 2665 Ethernet-Like-MIB
RFC 2674 802.1p and IEEE 802.1Q Bridge MIB
RFC 2688 MAU-MIB
RFC 2737 Entity MIB (Version 2)
RFC 2819 RMON MIB
RFC 2863 The Interfaces Group MIB
RFC 2925 Ping MIB
RFC 3414 SNMP-User based-SM MIB
RFC 3415 SNMP-View based-ACM MIB
RFC 3418 MIB for SNMPv3
RFC 3826 AES for SNMP's USM MIB
RFC 4133 Entity MIB (Version 3)
DA - 13792
North America — Version 4 — September 29, 2011
Page 5
QuickSpecs
HP E4210G Switch Series
Technical Specifications
LLDP-EXT-DOT1-MIB
LLDP-EXT-DOT3-MIB
LLDP-MIB
Network management
IEEE 802.1D (STP)
RFC 1215 SNMP Generic traps
RFC 2575 VACM for SNMP
Security
IEEE 802.1X Port Based Network Access Control
HP E4210-48G Switch (JF845A)
44 RJ-45 autosensing 10/100/1000 ports (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type 100BASE-TX,
Ports
IEEE 802.3ab Type 1000BASE-T); Media Type: Auto-MDIX; Duplex: 10BASE-T/100BASE-TX: half or full;
1000BASE-T: full only
4 dual-personality 10/100/1000 ports (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type 100BASE-TX,
IEEE 802.3ab Type 1000BASE-T)
1 RJ-45 serial console port
Supports a maximum of 4 10-GbE ports
11.8(d) x 17.4(w) x 1.7(h) in. (29.97 x 44.2 x 4.32 cm) (1U height)
Physical characteristics
Dimensions
10.4 lb. (4.72 kg)
Weight
Broadcom 5836 @ 264 MHz, 16 MB flash, 64 MB RAM; packet buffer size:
Memory and processor
Processor
1.5 MB
Mounts in an EIA standard 19-in. telco rack or equipment cabinet (hardware included)
Mounting
up to 130.9 million pps
Performance
Throughput
176 Gbps
Routing/Switching
capacity
32 entries
Routing table size
32°F to 104°F (0°C to 40°C)
Environment
Operating temperature
10% to 95%, noncondensing
Operating relative
humidity
14°F to 158°F (-10°C to 70°C)
Nonoperating/Storage
temperature
10% to 95%, noncondensing
Nonoperating/Storage
relative humidity
100-240 VAC
Electrical characteristics Voltage
50 / 60 Hz
Frequency
UL 60950-1:2003; CSA 22.2 60950-1:2003; IEC 60950-1:2001; EN 60950-1:2001
Safety
VCCI Class A; EN 55022 Class A; EN 55024; ICES-003 Class A
Emissions
IMC - Intelligent Management Center; command-line interface; Web browser; out-of-band management
Management
(serial RS-232C); SNMP Manager; Telnet; IEEE 802.3 Ethernet MIB
Refer to the HP website at: www.hp.com/networking/services for details on the service-level descriptions
Services
and product numbers. For details about services and response times in your area, please contact your
local HP sales office.
DA - 13792
North America — Version 4 — September 29, 2011
Page 6
QuickSpecs
HP E4210G Switch Series
Technical Specifications
Standards and protocols General protocols
(applies to all products in IEEE 802.1ag Service Layer OAM
series)
IEEE 802.1D MAC Bridges
IEEE 802.1p Priority
IEEE 802.1Q VLANs
IEEE 802.1s (MSTP)
IEEE 802.1s Multiple Spanning Trees
IEEE 802.1v VLAN classification by Protocol and Port
IEEE 802.1w Rapid Reconfiguration of Spanning Tree
IEEE 802.1X PAE
IEEE 802.3ad Link Aggregation (LAG)
IEEE 802.3ad Link Aggregation Control Protocol (LACP)
IEEE 802.3ae 10-Gigabit Ethernet
IEEE 802.3i 10BASE-T
IEEE 802.3x Flow Control
IEEE 802.3z 1000BASE-X
RFC 768 UDP
RFC 792 ICMP
RFC 793 TCP
RFC 826 ARP
RFC 854 TELNET
RFC 951 BOOTP
RFC 1350 TFTP Protocol (revision 2)
RFC 1519 CIDR
RFC 1542 BOOTP Extensions
RFC 2131 DHCP
RFC 3576 Ext to RADIUS (CoA only)
RFC 4675 RADIUS VLAN & Priority
MIBs
IEEE 8021-PAE-MIB
IEEE 8023-LAG-MIB
RFC 1213 MIB II
RFC 1493 Bridge MIB
RFC 1757 Remote Network Monitoring MIB
RFC 1907 SNMPv2 MIB
RFC 2011 SNMPv2 MIB for IP
RFC 2013 SNMPv2 MIB for UDP
RFC 2096 IP Forwarding Table MIB
RFC 2233 Interfaces MIB
RFC 2273 SNMP-NOTIFICATION-MIB
RFC 2452 IPV6-TCP-MIB
RFC 2454 IPV6-UDP-MIB
RFC 2465 IPv6 MIB
RFC 2466 ICMPv6 MIB
RFC 2571 SNMP Framework MIB
RFC 2572 SNMP-MPD MIB
RFC 2573 SNMP-Notification MIB
RFC 2574 SNMP USM MIB
RFC 2613 SMON MIB
RFC 2618 RADIUS Client MIB
RFC 2620 RADIUS Accounting MIB
DA - 13792
North America — Version 4 — September 29, 2011
Page 7
QuickSpecs
HP E4210G Switch Series
Technical Specifications
RFC 2665 Ethernet-Like-MIB
RFC 2674 802.1p and IEEE 802.1Q Bridge MIB
RFC 2688 MAU-MIB
RFC 2737 Entity MIB (Version 2)
RFC 2819 RMON MIB
RFC 2863 The Interfaces Group MIB
RFC 2925 Ping MIB
RFC 3414 SNMP-User based-SM MIB
RFC 3415 SNMP-View based-ACM MIB
RFC 3418 MIB for SNMPv3
RFC 3826 AES for SNMP's USM MIB
RFC 4133 Entity MIB (Version 3)
LLDP-EXT-DOT1-MIB
LLDP-EXT-DOT3-MIB
LLDP-MIB
Network management
IEEE 802.1D (STP)
RFC 1215 SNMP Generic traps
RFC 2575 VACM for SNMP
Security
IEEE 802.1X Port Based Network Access Control
HP E4210-24G-PoE Switch (JF846A)
20 RJ-45 auto-negotiating 10/100/1000 PoE ports (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type
Ports
100BASE-TX, IEEE 802.3ab Type 1000BASE-T, IEEE 802.3af PoE); Media Type: Auto-MDIX; Duplex:
10BASE-T/100BASE-TX: half or full; 1000BASE-T: full only
4 dual-personality 10/100/1000 ports (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type 100BASE-TX,
IEEE 802.3ab Type 1000BASE-T)
1 RJ-45 serial console port
Supports a maximum of 4 10-GbE ports
16.9(d) x 17.4(w) x 1.7(h) in. (42.93 x 44.2 x 4.32 cm) (1U height)
Physical characteristics
Dimensions
15.2 lb. (6.89 kg)
Weight
Broadcom 5836 @ 264 MHz, 16 MB flash, 64 MB RAM; packet buffer size:
Memory and processor
Processor
.75 MB
Mounts in an EIA standard 19-in. telco rack or equipment cabinet (hardware included)
Mounting
up to 95.2 million pps
Performance
Throughput
128 Gbps
Routing/Switching
capacity
32 entries
Routing table size
32°F to 104°F (0°C to 40°C)
Environment
Operating temperature
10% to 95%, noncondensing
Operating relative
humidity
14°F to 158°F (-10°C to 70°C)
Nonoperating/Storage
temperature
DA - 13792
North America — Version 4 — September 29, 2011
Page 8
QuickSpecs
HP E4210G Switch Series
Technical Specifications
Electrical characteristics
Safety
Emissions
Management
Services
Nonoperating/Storage
10% to 95%, noncondensing
relative humidity
100-240 VAC
Voltage
50 / 60 Hz
Frequency
UL 60950-1:2003; CSA 22.2 60950-1:2003; IEC 60950-1:2001; EN 60950-1:2001
VCCI Class A; EN 55022 Class A; EN 55024; ICES-003 Class A
IMC - Intelligent Management Center; command-line interface; Web browser; out-of-band management
(serial RS-232C); SNMP Manager; Telnet; IEEE 802.3 Ethernet MIB
Refer to the HP website at: www.hp.com/networking/services for details on the service-level descriptions
and product numbers. For details about services and response times in your area, please contact your
local HP sales office.
Standards and protocols General protocols
(applies to all products in IEEE 802.1ag Service Layer OAM
series)
IEEE 802.1D MAC Bridges
IEEE 802.1p Priority
IEEE 802.1Q VLANs
IEEE 802.1s (MSTP)
IEEE 802.1s Multiple Spanning Trees
IEEE 802.1v VLAN classification by Protocol and Port
IEEE 802.1w Rapid Reconfiguration of Spanning Tree
IEEE 802.1X PAE
IEEE 802.3ad Link Aggregation (LAG)
IEEE 802.3ad Link Aggregation Control Protocol (LACP)
IEEE 802.3ae 10-Gigabit Ethernet
IEEE 802.3i 10BASE-T
IEEE 802.3x Flow Control
IEEE 802.3z 1000BASE-X
RFC 768 UDP
RFC 792 ICMP
RFC 793 TCP
RFC 826 ARP
RFC 854 TELNET
RFC 951 BOOTP
RFC 1350 TFTP Protocol (revision 2)
RFC 1519 CIDR
RFC 1542 BOOTP Extensions
RFC 2131 DHCP
RFC 3576 Ext to RADIUS (CoA only)
RFC 4675 RADIUS VLAN & Priority
MIBs
IEEE 8021-PAE-MIB
IEEE 8023-LAG-MIB
RFC 1213 MIB II
RFC 1493 Bridge MIB
RFC 1757 Remote Network Monitoring MIB
RFC 1907 SNMPv2 MIB
RFC 2011 SNMPv2 MIB for IP
RFC 2013 SNMPv2 MIB for UDP
RFC 2096 IP Forwarding Table MIB
DA - 13792
North America — Version 4 — September 29, 2011
Page 9
QuickSpecs
HP E4210G Switch Series
Technical Specifications
RFC 2233 Interfaces MIB
RFC 2273 SNMP-NOTIFICATION-MIB
RFC 2452 IPV6-TCP-MIB
RFC 2454 IPV6-UDP-MIB
RFC 2465 IPv6 MIB
RFC 2466 ICMPv6 MIB
RFC 2571 SNMP Framework MIB
RFC 2572 SNMP-MPD MIB
RFC 2573 SNMP-Notification MIB
RFC 2574 SNMP USM MIB
RFC 2613 SMON MIB
RFC 2618 RADIUS Client MIB
RFC 2620 RADIUS Accounting MIB
RFC 2665 Ethernet-Like-MIB
RFC 2674 802.1p and IEEE 802.1Q Bridge MIB
RFC 2688 MAU-MIB
RFC 2737 Entity MIB (Version 2)
RFC 2819 RMON MIB
RFC 2863 The Interfaces Group MIB
RFC 2925 Ping MIB
RFC 3414 SNMP-User based-SM MIB
RFC 3415 SNMP-View based-ACM MIB
RFC 3418 MIB for SNMPv3
RFC 3826 AES for SNMP's USM MIB
RFC 4133 Entity MIB (Version 3)
LLDP-EXT-DOT1-MIB
LLDP-EXT-DOT3-MIB
LLDP-MIB
Network management
IEEE 802.1D (STP)
RFC 1215 SNMP Generic traps
RFC 2575 VACM for SNMP
Security
IEEE 802.1X Port Based Network Access Control
DA - 13792
North America — Version 4 — September 29, 2011
Page 10
QuickSpecs
HP E4210G Switch Series
Accessories
HP E4210G Switch Series Modules
accessories
HP 2-Port 10-Gig LCM E45/E48 Module
HP 2-Port 10-Gig XFP E45/E48 Module
HP 2-Port 10-GbE SFP+ A5500/E4800/E4500 Module
HP 1-Port 10-Gig XFP E45/E48 Module
Transceivers
HP X124 1G SFP LC SX Transceiver
HP X120 1G SFP LC LX Transceiver
HP X124 1G SFP LC LH40 1310nm Transceiver
HP X125 1G SFP LC LH70 Transceiver
HP X130 SFP+ LC SR Transceiver
HP X130 SFP+ LC LRM Transceiver
HP X130 SFP+ LC LR Transceiver
HP X130 10G XFP SC LR Transceiver
HP X130 10G XFP LC SR Transceiver
HP X135 10G XFP LC ER Transceiver
HP X130 CX4 XFP Transceiver
HP X124 1G SFP LC LX Transceiver
Cables
HP 50 cm CX4 Cable
HP 100 cm CX4 Cable
HP 300 cm CX4 Cable
HP 0.5 m Multimode OM3 LC/LC Optical Cable
HP 1 m Multimode OM3 LC/LC Optical Cable
HP 2 m Multimode OM3 LC/LC Optical Cable
HP 5 m Multimode OM3 LC/LC Optical Cable
HP 15 m Multimode OM3 LC/LC Optical Cable
HP 30 m Multimode OM3 LC/LC Optical Cable
HP 50 m Multimode OM3 LC/LC Optical Cable
HP 0.5 m PremierFlex OM3+ LC/LC Optical Cable
NEW HP 1 m PremierFlex OM3+ LC/LC Optical Cable
NEW HP 2 m PremierFlex OM3+ LC/LC Optical Cable
NEW HP 5 m PremierFlex OM3+ LC/LC Optical Cable
NEW HP 15 m PremierFlex OM3+ LC/LC Optical Cable
NEW HP 30 m PremierFlex OM3+ LC/LC Optical Cable
NEW HP 50 m PremierFlex OM3+ LC/LC Optical Cable
DA - 13792
North America — Version 4 — September 29, 2011
JE051A
JE049A
JD368B
JE053A
JD493A
JD119B
JD061A
JD063B
JD092B
JD093B
JD094B
JD108B
JD117B
JD121A
JD506A
JD494A
JE054A
JE055A
JE056A
AJ833A
AJ834A
AJ835A
AJ836A
AJ837A
AJ838A
AJ839A
BK837A
BK838A
BK839A
BK840A
BK841A
BK842A
BK843A
Page 11
QuickSpecs
HP E4210G Switch Series
Accessory Product Details
NOTE: Details are not available for all accessories. The following specifications were available at the time of publication.
HP 4500/4800 2-port
10GbE LCM Module
(JE051A)
Ports
Services
2 CX4 10-GbE ports; Duplex: full only
Refer to the HP website at www.hp.com/networking/services for details on the
service-level descriptions and product numbers. For details about services
and response times in your area, please contact your local HP sales office.
HP 4500/4800 2-port
10GbE XFP Module
(JE049A)
Ports
Services
2 XFP 10-GbE ports; Duplex: full only
Refer to the HP website at www.hp.com/networking/services for details on the
service-level descriptions and product numbers. For details about services
and response times in your area, please contact your local HP sales office.
HP 4500/4800 1-port
10GbE XFP Module
(JE053A)
Ports
Services
1 XFP 10-GbE port; Duplex: full only
Refer to the HP website at www.hp.com/networking/services for details on the
service-level descriptions and product numbers. For details about services
and response times in your area, please contact your local HP sales office.
HP X124 1G SFP LC SX
Transceiver (JD493A)
Ports
Connectivity
1 LC 1000BASE-SX port
Connector type
Wavelength
Dimensions
JD493A HP X124 1G SFP
Physical characteristics
LC SX Transceiver that
provides a full duplex
Gigabit solution up to
550m on Multi Mode
Electrical characteristics
fiber.
Cabling
Services
DA - 13792
LC
850 nm
2.17(d) x 0.6(w) x 0.46(h) in. (5.51 x 1.52 x
1.17 cm)
Full configuration weight 0.04 lb. (0.02 kg)
Power consumption
0.8 W
typical
1.0 W
Power consumption
maximum
Maximum distance:
• 220m-550m
Fiber type
Multi Mode
Refer to the HP website at www.hp.com/networking/services for details on
the service-level descriptions and product numbers. For details about
services and response times in your area, please contact your local HP sales
office.
North America — Version 4 — September 29, 2011
Page 12
QuickSpecs
HP E4210G Switch Series
Accessory Product Details
HP X120 1G SFP LC LX
Transceiver (JD119B)
Ports
Connectivity
A small form-factor
pluggable (SFP) Gigabig Physical characteristics
LX transceiver that provides
a full duplex Gigabit
solution up to 550m on
Electrical characteristics
MMF or 10Km on SMF
Cabling
Maximum distance:
• 550m for Multimode
• 10km for Singlemode
Fiber type
Both
Refer to the HP website at www.hp.com/networking/services for details on
the service-level descriptions and product numbers. For details about
services and response times in your area, please contact your local HP sales
office.
Services
HP X124 1G SFP LC LH40 Ports
1310nm Transceiver
Connectivity
(JD061A)
A small form-factor
pluggable SFP Gigabit
LH40 transceiver that
provides a full duplex
Gigabit solution up to
40km on a single-mode
fiber.
Physical characteristics
Electrical characteristics
Cabling
1 SFP 1000BASE-LX port (IEEE 802.3z Type 1000BASE-LX)
LC
Connector type
1300 nm
Wavelength
2.17(d) x 0.6(w) x 0.46(h) in. (5.51 x 1.52 x
Dimensions
1.17 cm)
Full configuration weight 0.04 lb. (0.02 kg)
0.8 W
Power consumption
typical
1.0 W
Power consumption
maximum
Cable type:
Either single mode or multimode;
1 LC 1000Base-LH port (no IEEE standard exists for 1550 nm optics)
Connector type
LC
Wavelength
1310 nm
Dimensions
2.17(d) x 0.6(w) x 0.46(h) in. (5.51 x 1.52 x 1.17
cm)
Full configuration weight 0.04 lb. (0.02 kg)
Power consumption typical 0.8 W
Power consumption
1.0 W
maximum
Cable type:
Single-mode fiber optic, complying with ITU-T G.652;
Maximum distance:
Services
DA - 13792
40km distance
Fiber type
Single Mode
Refer to the HP website at www.hp.com/networking/services for details on the
service-level descriptions and product numbers. For details about services
and response times in your area, please contact your local HP sales office.
North America — Version 4 — September 29, 2011
Page 13
QuickSpecs
HP E4210G Switch Series
Accessory Product Details
HP X125 1G SFP LC
LH70 Transceiver
(JD063B)
Ports
Connectivity
A small form-factor
pluggable (SFP) Gigabit
LH70 transceiver that
provides a full-duplex
Gigabit solution up to
70km on a single-mode
fiber.
Physical characteristics
Electrical characteristics
Cabling
Maximum distance:
• 70km
Fiber type
Single Mode
Refer to the HP website at www.hp.com/networking/services for details on
the service-level descriptions and product numbers. For details about
services and response times in your area, please contact your local HP sales
office.
Services
HP X130 10G XFP CX4
Transceiver (JD506A)
An XFP 10 Gigabit CX4
transceiver that provides
full duplex 10G solution
using CX4 cabling.
HP X124 1G SFP LC LX
Transceiver (JD494A)
1 LC 1000BASE-LH port (no IEEE standard exists for 1550 nm optics)
LC
Connector type
1550 nm
Wavelength
2.17(d) x 0.6(w) x 0.46(h) in. (5.51 x 1.52 x
Dimensions
1.17 cm)
Full configuration weight 0.04 lb. (0.02 kg)
0.8 W
Power consumption
typical
1.0 W
Power consumption
maximum
Cable type:
Single-mode fiber optic, complying with ITU-T G.652;
Ports
Connectivity
Cabling
Services
1 CX4 10-GbE port; Duplex: full only
CX4
Connector type
15m Max CX4 cables
Cable length
Refer to the HP website at: www.hp.com/networking/services for details on
the service-level descriptions and product numbers. For details about
services and response times in your area, please contact your local HP sales
office.
Ports
Connectivity
1 LC 1000BASE-LX port (IEEE 802.3z Type 1000BASE-LX)
LC
Connector type
1300 nm
Wavelength
2.17(d) x 0.6(w) x 0.46(h) in. (5.51 x 1.52 x
Dimensions
1.17 cm)
Full configuration weight 0.04 lb. (0.02 kg)
SFP
Transceiver form factor
0.8 W
Power consumption
typical
1.0 W
Power consumption
maximum
Maximum distance:
• 500m for Multimode
• 10km for Singlemode
A small form-factor
pluggable (SFP) Gigabig Physical characteristics
LX transceiver that provides
a full duplex Gigabit
solution up to 550m on
MMF or 10Km on SMF
Electrical characteristics
Cabling
DA - 13792
North America — Version 4 — September 29, 2011
Page 14
QuickSpecs
HP E4210G Switch Series
Accessory Product Details
HP 0.5 m Multimode
OM3 LC/LC Optical
Cable (AJ833A)
Services
Refer to the HP website at: www.hp.com/networking/services for details on
the service-level descriptions and product numbers. For details about
services and response times in your area, please contact your local HP sales
office.
Cabling
Cable type:
type
50/125 µm (core/cladding) diameter, mulitimode fiber optic, with effective
modal bandwidth of 2000 MHz/km as detailed in TIA-492AAAC for
distances of up to 300 m
Maximum distance:
distance
10Gbps Transfer Rate (Ethernet): 300m
Notes
Services
DA - 13792
Cable Specs: Tight buffered duplex fiber optic multimode OM3 50/125 um
fiber optic cable and Ethernet assembly with LC duplex connectors on one
end and LC duplex connectors on other end.
Dimensions: Core diameter: 50 ± 3.0um Cladding diameter: 125 ±
2.0um Coating diameter: 245 ± 10um
Optical glass: Bandwidth: For LED sources: 1500/500 MHz-km
@850/1300nm.
Optical glass: Bandwidth: For Laser sources: 2000/500 MHz-km
@850/1300nm. VCSEL Laser sources: 600 / 600 meters
@850/1300nm for Gigabit Ethernet compliant links.
CABLE: The cable is duplex zipcord graded index 50/125um
multimode optical fiber and designed to work in both the 850 and
1300 nm wavelength windows.
BULK CABLE & CABLE ASSEMBLY CONFIGURATION:
Jacket Material: Riser Grade - Low Smoke Zero Halogen
thermoplastic.
Jacket Color: Aqua for OM3 multimode per TIA 598
Boot Color: White
Insertion Loss: less than 0.5 dB @ 850 with LED source, 0.003 dB/M
added for lengths > 30 meters.
Maximum Cable attenuation: 3.0 dB/km @ 850 nm, 1.0 dB/Km @
1310 nm @ 23°C as tested in accordance with EIA 455-46.
Weight: Air Packed Weight: 1 LB Net Weight: 0.454Kg
Refer to the HP website at www.hp.com/networking/services for details on the
service-level descriptions and product numbers. For details about services
and response times in your area, please contact your local HP sales office.
North America — Version 4 — September 29, 2011
Page 15
QuickSpecs
HP E4210G Switch Series
Accessory Product Details
HP 1 m Multimode OM3 Cabling
LC/LC Optical Cable
(AJ834A)
Notes
Services
DA - 13792
Cable type:
type
50/125 µm (core/cladding) diameter, mulitimode fiber optic, with effective
modal bandwidth of 2000 MHz/km as detailed in TIA-492AAAC for
distances of up to 300 m
Maximum distance:
distance
10Gbps Transfer Rate (Ethernet): 300m
Cable Specs: Tight buffered duplex fiber optic multimode OM3 50/125 um
fiber optic cable and Ethernet assembly with LC duplex connectors on one
end and LC duplex connectors on other end.
Dimensions: Core diameter: 50 ± 3.0um Cladding diameter: 125 ±
2.0um Coating diameter: 245 ± 10um
Optical Glass Bandwidth: For LED sources: 1500/500 MHz-km
@850/1300nm.
Optical Glass: For Laser sources: 2000/500 MHz-km
@850/1300nm. VCSEL Laser sources: Shall achieve 600 / 600
meters @850/1300nm for Gigabit Ethernet compliant links.
CABLE: The cable is duplex zipcord graded index 50/125um
multimode optical fiber. The cable is designed to work in both the 850
and 1300 nm wavelength windows.
BULK CABLE & CABLE ASSEMBLY CONFIGURATION:
Jacket Material: Riser Grade - Low Smoke Zero Halogen
thermoplastic.
Jacket Color: Aqua for OM3 multimode per TIA 598
Boot Color: White
Insertion Loss: less than 0.5 dB @ 850 with LED source, 0.003 dB/M
added for lengths > 30 meters.
Maximum Cable attenuation: 3.0 dB/km @ 850 nm, 1.0 dB/Km @
1310 nm @ 23°C as tested in accordance with EIA 455-46.
Weight: Air Packed Weight: 1 LB Net Weight: 0.454Kg
Refer to the HP website at www.hp.com/networking/services for details on the
service-level descriptions and product numbers. For details about services
and response times in your area, please contact your local HP sales office.
North America — Version 4 — September 29, 2011
Page 16
QuickSpecs
HP E4210G Switch Series
Accessory Product Details
HP 2 m Multimode OM3 Cabling
LC/LC Optical Cable
(AJ835A)
Notes
Services
DA - 13792
Cable type:
type
50/125 µm (core/cladding) diameter, mulitimode fiber optic, with effective
modal bandwidth of 2000 MHz/km as detailed in TIA-492AAAC for
distances of up to 300 m;
Maximum distance:
distance
10Gbps Transfer Rate (Ethernet): 300m
Cable Specs: Tight buffered duplex fiber optic multimode OM3 50/125 um
fiber optic cable and Ethernet assembly with LC duplex connectors on one
end and LC duplex connectors on other end.
Dimensions: Core diameter: 50 ± 3.0um Cladding diameter: 125 ±
2.0um Coating diameter: 245 ± 10um
Optical Glass Bandwidth: For LED sources: 1500/500 MHz-km
@850/1300nm.
Optical Glass: For Laser sources: 2000/500 MHz-km
@850/1300nm. VCSEL Laser sources: Shall achieve 600 / 600
meters @850/1300nm for Gigabit Ethernet compliant links.
CABLE: The cable is duplex zipcord graded index 50/125um
multimode optical fiber. The cable is designed to work in both the 850
and 1300 nm wavelength windows.
BULK CABLE & CABLE ASSEMBLY CONFIGURATION:
Jacket Material: Riser Grade - Low Smoke Zero Halogen
thermoplastic.
Jacket Color: Aqua for OM3 multimode per TIA 598
Boot Color: White
Insertion Loss: less than 0.5 dB @ 850 with LED source, 0.003 dB/M
added for lengths > 30 meters.
Maximum Cable attenuation: 3.0 dB/km @ 850 nm, 1.0 dB/Km @
1310 nm @ 23°C as tested in accordance with EIA 455-46.
Weight: Air Packed Weight: 1 LB Net Weight: 0.454Kg
Refer to the HP website at www.hp.com/networking/services for details on the
service-level descriptions and product numbers. For details about services
and response times in your area, please contact your local HP sales office.
North America — Version 4 — September 29, 2011
Page 17
QuickSpecs
HP E4210G Switch Series
Accessory Product Details
HP 5 m Multimode OM3 Cabling
LC/LC Optical Cable
(AJ836A)
Notes
Services
DA - 13792
Cable type:
type
50/125 µm core/cladding) diameter, mulitimode fiber optic, with effective
modal bandwidth of 2000 MHz/km as detailed in TIA-492AAAC for
distances of up to 300 m;
Maximum distance:
distance
10Gbps Transfer Rate (Ethernet): 300m
Cable Specs: This specification defines the detail requirements for a tight
buffered duplex fiber optic multimode OM3 50/125 um fiber optic cable
and Ethernet assembly with LC duplex connectors on one end and LC duplex
connectors on other end.
Dimensions: Core diameter: 50 ± 3.0um Cladding diameter: 125 ±
2.0um Coating diameter: 245 ± 10um
Optical Glass Bandwidth: For LED sources: 1500/500 MHz-km
@850/1300nm.
Optical Glass: For Laser sources: 2000/500 MHz-km
@850/1300nm. VCSEL Laser sources: Shall achieve 600 / 600
meters @850/1300nm for Gigabit Ethernet compliant links.
CABLE: The cable is duplex zipcord graded index 50/125um
multimode optical fiber. The cable is designed to work in both the 850
and 1300 nm wavelength windows.
BULK CABLE & CABLE ASSEMBLY CONFIGURATION:
Jacket Material: Riser Grade - Low Smoke Zero Halogen
thermoplastic.
Jacket Color: Aqua for OM3 multimode per TIA 598
Boot Color: White
Insertion Loss: less than 0.5 dB @ 850 with LED source, 0.003 dB/M
added for lengths > 30 meters.
Maximum Cable attenuation: 3.0 dB/km @ 850 nm, 1.0 dB/Km @
1310 nm @ 23°C as tested in accordance with EIA 455-46.
Weight: Air Packed Weight: 1 LB Net Weight: 0.454Kg
Refer to the HP website at www.hp.com/networking/services for details on the
service-level descriptions and product numbers. For details about services
and response times in your area, please contact your local HP sales office.
North America — Version 4 — September 29, 2011
Page 18
QuickSpecs
HP E4210G Switch Series
Accessory Product Details
HP 15 m Multimode
OM3 LC/LC Optical
Cable (AJ837A)
Cabling
Notes
Services
DA - 13792
Cable type:
type
50/125 µm (core/cladding) diameter, mulitimode fiber optic, with effective
modal bandwidth of 2000 MHz/km as detailed in TIA-492AAAC for
distances of up to 300 m;
Maximum distance:
distance
10Gbps Transfer Rate (Ethernet): 300m
Cable Specs: Tight buffered duplex fiber optic multimode OM3 50/125 um
fiber optic cable and Ethernet assembly with LC duplex connectors on one
end and LC duplex connectors on other end.
Dimensions: Core diameter: 50 ± 3.0um Cladding diameter: 125 ±
2.0um Coating diameter: 245 ± 10um
Optical Glass Bandwidth: For LED sources: 1500/500 MHz-km
@850/1300nm.
Optical Glass: For Laser sources: 2000/500 MHz-km
@850/1300nm. VCSEL Laser sources: Shall achieve 600 / 600
meters @850/1300nm for Gigabit Ethernet compliant links.
CABLE: The cable is duplex zipcord graded index 50/125um
multimode optical fiber. The cable is designed to work in both the 850
and 1300 nm wavelength windows.
BULK CABLE & CABLE ASSEMBLY CONFIGURATION:
Jacket Material: Riser Grade - Low Smoke Zero Halogen
thermoplastic.
Jacket Color: Aqua for OM3 multimode per TIA 598
Boot Color: White
Insertion Loss: less than 0.5 dB @ 850 with LED source, 0.003 dB/M
added for lengths > 30 meters.
Maximum Cable attenuation: 3.0 dB/km @ 850 nm, 1.0 dB/Km @
1310 nm @ 23°C as tested in accordance with EIA 455-46.
Weight: Air Packed Weight: 1 LB Net Weight: 0.454Kg
Refer to the HP website at www.hp.com/networking/services for details on the
service-level descriptions and product numbers. For details about services
and response times in your area, please contact your local HP sales office.
North America — Version 4 — September 29, 2011
Page 19
QuickSpecs
HP E4210G Switch Series
Accessory Product Details
HP 30 m Multimode
OM3 LC/LC Optical
Cable (AJ838A)
Cabling
Notes
Services
DA - 13792
Cable type:
type
50/125 µm (core/cladding) diameter, mulitimode fiber optic, with effective
modal bandwidth of 2000 MHz/km as detailed in TIA-492AAAC for
distances of up to 300 m;
Maximum distance:
distance
10Gbps Transfer Rate (Ethernet): 300m
Cable Specs: Tight buffered duplex fiber optic multimode OM3 50/125 um
fiber optic cable and Ethernet assembly with LC duplex connectors on one
end and LC duplex connectors on other end.
Dimensions: Core diameter: 50 ± 3.0um Cladding diameter: 125 ±
2.0um Coating diameter: 245 ± 10um
Optical Glass Bandwidth: For LED sources: 1500/500 MHz-km
@850/1300nm.
Optical Glass: For Laser sources: 2000/500 MHz-km
@850/1300nm. VCSEL Laser sources: Shall achieve 600 / 600
meters @850/1300nm for Gigabit Ethernet compliant links.
CABLE: The cable is duplex zipcord graded index 50/125um
multimode optical fiber. The cable is designed to work in both the 850
and 1300 nm wavelength windows.
BULK CABLE & CABLE ASSEMBLY CONFIGURATION:
Jacket Material: Riser Grade - Low Smoke Zero Halogen
thermoplastic.
Jacket Color: Aqua for OM3 multimode per TIA 598
Boot Color: White
Insertion Loss: less than 0.5 dB @ 850 with LED source, 0.003 dB/M
added for lengths > 30 meters.
Maximum Cable attenuation: 3.0 dB/km @ 850 nm, 1.0 dB/Km @
1310 nm @ 23°C as tested in accordance with EIA 455-46.
Weight: Air Packed Weight: 1 LB Net Weight: 0.454Kg
Refer to the HP website at www.hp.com/networking/services for details on the
service-level descriptions and product numbers. For details about services
and response times in your area, please contact your local HP sales office.
North America — Version 4 — September 29, 2011
Page 20
QuickSpecs
HP E4210G Switch Series
Accessory Product Details
HP 50 m Multimode
OM3 LC/LC Optical
Cable (AJ839A)
Cabling
Notes
Services
DA - 13792
Cable type:
type
50/125 µm (core/cladding) diameter, mulitimode fiber optic, with effective
modal bandwidth of 2000 MHz/km as detailed in TIA-492AAAC for
distances of up to 300 m;
Maximum distance:
distance
10Gbps Transfer Rate (Ethernet): 300m
Cable Specs: Tight buffered duplex fiber optic multimode OM3 50/125 um
fiber optic cable and Ethernet assembly with LC duplex connectors on one
end and LC duplex connectors on other end.
Dimensions: Core diameter: 50 ± 3.0um Cladding diameter: 125 ±
2.0um Coating diameter: 245 ± 10um
Optical Glass Bandwidth: For LED sources: 1500/500 MHz-km
@850/1300nm.
Optical Glass: For Laser sources: 2000/500 MHz-km
@850/1300nm. VCSEL Laser sources: Shall achieve 600 / 600
meters @850/1300nm for Gigabit Ethernet compliant links.
CABLE: The cable is duplex zipcord graded index 50/125um
multimode optical fiber. The cable is designed to work in both the 850
and 1300 nm wavelength windows.
BULK CABLE & CABLE ASSEMBLY CONFIGURATION:
Jacket Material: Riser Grade - Low Smoke Zero Halogen
thermoplastic.
Jacket Color: Aqua for OM3 multimode per TIA 598
Boot Color: White
Insertion Loss: less than 0.5 dB @ 850 with LED source, 0.003 dB/M
added for lengths > 30 meters.
Maximum Cable attenuation: 3.0 dB/km @ 850 nm, 1.0 dB/Km @
1310 nm @ 23°C as tested in accordance with EIA 455-46.
Weight: Air Packed Weight: 1 LB Net Weight: 0.454Kg
Refer to the HP website at www.hp.com/networking/services for details on the
service-level descriptions and product numbers. For details about services
and response times in your area, please contact your local HP sales office.
North America — Version 4 — September 29, 2011
Page 21
QuickSpecs
HP E4210G Switch Series
Accessory Product Details
HP 0.5 m PremierFlex
OM3+ LC/LC Optical
Cable (BK837A)
Notes
Services
HP 1 m PremierFlex
OM3+ LC/LC Optical
Cable (BK838A)
Notes
Services
DA - 13792
Cable Specs: Graded-index, "bendable" fiber optic multimode OM3+
50/125um duplex cable and Ethernet assembly with LC duplex connectors
on each end.
• Core diameter: 50um ± 3um; Cladding diameter: 125um ± 2um;
Coating diameter: 245 ± 10um
• Bandwidth: 3000 MHz-km @ 850nm (Laser)
• Jacket Color: Blue
• Jacket Material: Riser Grade - Low Smoke Zero Halogen (LSZH)
thermoplastic.
• Boot Color: White
• Outer Jacket Print: HP PremierFlex OM3+ Fiber Optic Cable, 50/125um,
Type OFNR (UL), LSZH, cUL OFN FT4, ROHS. Cable also has a longitudal
white stripe that runs the entire length of the cable.
• Insertion Loss: less than 0.5dB @ 850nm with LED source, 0.003dB/m
added for lengths >30m
• Maximum Cable Attenuation: 3.0 dB/km @ 850nm, 1.0 dB/km @ 1310
nm @ 23°C as tested in accordance with EIA 455-46
Refer to the HP website at www.hp.com/networking/services for details on the
service-level descriptions and product numbers. For details about services
and response times in your area, please contact your local HP sales office.
Cable Specs: Graded-index, "bendable" fiber optic multimode OM3+
50/125um duplex cable and Ethernet assembly with LC duplex connectors
on each end.
• Core Diameter: 50um ±3um, Cladding diameter: 125um ±2um;
Coating diameter: 245 ± 10um
• Bandwidth: 3000 MHz-km @ 850nm (Laser)
• Jacket Color: Blue
• Jacket Material: Riser Grade – Low Smoke Zero Halogen (LSZH)
thermoplastic
• Boot Color: White
• Outer Jacket Print: HP PremierFlex OM3+ Fiber Optic Cable, 50/125um,
Type OFNR (UL), LSZH, cUL, OFN FT4, ROHS. Cable also has a
longitudinal white stripe that runs the entire length of the cable.
• Insertion Loss: Less than 0.5dB @ 850nm with LED source, 0.003dB/m
added for lengths >30m
• Maximum Cable Attenuation: 3.0 dB/km @ 850nm, 1.0 dB/km @
1310nm @ 23°C as tested in accordance with EIA 455-45
Refer to the HP website at www.hp.com/networking/services for details on the
service-level descriptions and product numbers. For details about services
and response times in your area, please contact your local HP sales office.
North America — Version 4 — September 29, 2011
Page 22
QuickSpecs
HP E4210G Switch Series
Accessory Product Details
HP 2 m PremierFlex
OM3+ LC/LC Optical
Cable (BK839A)
Notes
Services
HP 5 m PremierFlex
OM3+ LC/LC Optical
Cable (BK840A)
Notes
Services
DA - 13792
Cable Specs: Graded-index, "bendable" fiber optic multimode OM3+
50/125um duplex cable and Ethernet assembly with LC duplex connectors
on each end.
• Core diameter: 50um ±3um, Cladding diameter: 125um ±2um; Coating
diameter: 245 ± 10um
• Bandwidth: 3000 MHz-km @ 850nm (Laser)
• Jacket Color: Blue
• Jacket Material: Riser Grade – Low Smoke Zero Halogen (LSZH)
thermoplastic
• Boot Color: White
• Outer Jacket Print: HP PremierFlex OM3+ Fiber Optic Cable, 50/125um,
Type OFNR (UL), LSZH, cUL, OFN FT4, ROHS. Cable also has a
longitudinal white stripe that runs the entire length of the cable.
• Insertion Loss: Less than 0.5dB @ 850nm with LED source, 0.003dB/m
added for lengths >30m
• Maximum Cable Attenuation: 3.0 dB/km @ 850nm, 1.0 dB/km @
1310nm @ 23°C as tested in accordance with EIA 455-45
Refer to the HP website at www.hp.com/networking/services for details on the
service-level descriptions and product numbers. For details about services
and response times in your area, please contact your local HP sales office.
Cable Specs: Graded-index, "bendable" fiber optic multimode OM3+
50/125um duplex cable and Ethernet assembly with LC duplex connectors
on each end.
• Core diameter: 50um ±3um, Cladding diameter: 125um ±2um; Coating
diameter: 245 ± 10um
• Bandwidth: 3000 MHz-km @ 850nm (Laser)
• Jacket Color: Blue
• Jacket Material: Riser Grade – Low Smoke Zero Halogen (LSZH)
thermoplastic
• Boot Color: White
• Outer Jacket Print: HP PremierFlex OM3+ Fiber Optic Cable, 50/125um,
Type OFNR (UL), LSZH, cUL, OFN FT4, ROHS. Cable also has a
longitudinal white stripe that runs the entire length of the cable.
• Insertion Loss: Less than 0.5dB @ 850nm with LED source, 0.003dB/m
added for lengths >30m
• Maximum Cable Attenuation: 3.0 dB/km @ 850nm, 1.0 dB/km @
1310nm @ 23°C as tested in accordance with EIA 455-45
Refer to the HP website at www.hp.com/networking/services for details on the
service-level descriptions and product numbers. For details about services
and response times in your area, please contact your local HP sales office.
North America — Version 4 — September 29, 2011
Page 23
QuickSpecs
HP E4210G Switch Series
Accessory Product Details
HP 15 m PremierFlex
OM3+ LC/LC Optical
Cable (BK841A)
Notes
Services
HP 30 m PremierFlex
OM3+ LC/LC Optical
Cable (BK842A)
Notes
Services
DA - 13792
Cable Specs: Graded-index, "bendable" fiber optic multimode OM3+
50/125um duplex cable and Ethernet assembly with LC duplex connectors
on each end.
• Core diameter: 50um ±3um, Cladding diameter: 125um ±2um; Coating
diameter: 245 ± 10um
• Bandwidth: 3000 MHz-km @ 850nm (Laser)
• Jacket Color: Blue
• Jacket Material: Riser Grade – Low Smoke Zero Halogen (LSZH)
thermoplastic
• Boot Color: White
• Outer Jacket Print: HP PremierFlex OM3+ Fiber Optic Cable, 50/125um,
Type OFNR (UL), LSZH, cUL, OFN FT4, ROHS. Cable also has a
longitudinal white stripe that runs the entire length of the cable.
• Insertion Loss: Less than 0.5dB @ 850nm with LED source, 0.003dB/m
added for lengths >30m
• Maximum Cable Attenuation: 3.0 dB/km @ 850nm, 1.0 dB/km @
1310nm @ 23°C as tested in accordance with EIA 455-45
Refer to the HP website at www.hp.com/networking/services for details on the
service-level descriptions and product numbers. For details about services
and response times in your area, please contact your local HP sales office.
Cable Specs: Graded-index, "bendable" fiber optic multimode OM3+
50/125um duplex cable and Ethernet assembly with LC duplex connectors
on each end.
• Core diameter: 50um ±3um, Cladding diameter: 125um ±2um; Coating
diameter: 245 ± 10um
• Bandwidth: 3000 MHz-km @ 850nm (Laser)
• Jacket Color: Blue
• Jacket Material: Riser Grade – Low Smoke Zero Halogen (LSZH)
thermoplastic
• Boot Color: White
• Outer Jacket Print: HP PremierFlex OM3+ Fiber Optic Cable, 50/125um,
Type OFNR (UL), LSZH, cUL, OFN FT4, ROHS. Cable also has a
longitudinal white stripe that runs the entire length of the cable.
• Insertion Loss: Less than 0.5dB @ 850nm with LED source, 0.003dB/m
added for lengths >30m
• Maximum Cable Attenuation: 3.0 dB/km @ 850nm, 1.0 dB/km @
1310nm @ 23°C as tested in accordance with EIA 455-45
Refer to the HP website at www.hp.com/networking/services for details on the
service-level descriptions and product numbers. For details about services
and response times in your area, please contact your local HP sales office.
North America — Version 4 — September 29, 2011
Page 24
QuickSpecs
HP E4210G Switch Series
Accessory Product Details
HP 50 m PremierFlex
OM3+ LC/LC Optical
Cable (BK843A)
Notes
Services
Cable Specs: Graded-index, "bendable" fiber optic multimode OM3+
50/125um duplex cable and Ethernet assembly with LC duplex connectors
on each end.
• Core diameter: 50um ±3um, Cladding diameter: 125um ±2um; Coating
diameter: 245 ± 10um
• Bandwidth: 3000 MHz-km @ 850nm (Laser)
• Jacket Color: Blue
• Jacket Material: Riser Grade – Low Smoke Zero Halogen (LSZH)
thermoplastic
• Boot Color: White
• Outer Jacket Print: HP PremierFlex OM3+ Fiber Optic Cable, 50/125um,
Type OFNR (UL), LSZH, cUL, OFN FT4, ROHS. Cable also has a
longitudinal white stripe that runs the entire length of the cable.
• Insertion Loss: Less than 0.5dB @ 850nm with LED source, 0.003dB/m
added for lengths >30m
• Maximum Cable Attenuation: 3.0 dB/km @ 850nm, 1.0 dB/km @
1310nm @ 23°C as tested in accordance with EIA 455-45
Refer to the HP website at www.hp.com/networking/services for details on the
service-level descriptions and product numbers. For details about services
and response times in your area, please contact your local HP sales office.
To learn more, visit: www.hp.com/networking
© Copyright 2011 Hewlett-Packard Development Company, L.P. The information contained herein is subject to change without
notice. The only warranties for HP products and services are set forth in the express warranty statements accompanying such
products and services. Nothing herein should be construed as constituting an additional warranty. HP shall not be liable for
technical or editorial errors or omissions contained herein.
DA - 13792
North America — Version 4 — September 29, 2011
Page 25
Download PDF
Similar pages