IRISH STANDARDS BASED ON CENELEC STANDARDS PUBLISHED ON
1.
6 MAY 2010
I.S. EN 50491-5-1:2010
"General requirements for Home and Building Electronic Systems (HBES) and Building
Automation and Control Systems (BACS) -- Part 5-1: EMC requirements, conditions and
test set-up"
2.
I.S. EN 50377-8-13:2010
Connector sets and interconnect components to be used in optical fibre communication
systems - Product specifications -- Part 8-13: Type LSH-PC simplex terminated on IEC
60793-2-50 category B1.1 and B1.3 singlemode fibre with titanium composite ferrule for
category U
3.
S.R. CLC/TR 62271-208:2010
"High-voltage switchgear and controlgear -- Part 208: Methods to quantify the steady
state, power-frequency electromagnetic fields generated by HV switchgear assemblies
and HV/LV prefabricated substations"
4.
I.S. EN 50527-1:2010
Procedure for the assessment of the exposure to electromagnetic fields of workers
bearing active implantable medical devices -- Part 1: General
5.
I.S. EN 50491-5-2:2010
"General requirements for Home and Building Electronic Systems (HBES) and Building
Automation and Control Systems (BACS) -- Part 5-2: EMC requirements for HBES/BACS
used in residential, commercial and light industry environment"
6.
I.S. EN 50491-5-3:2010
General requirements for Home and Building Electronic Systems (HBES) and Building
Automation and Control Systems (BACS) -- Part 5-3: EMC requirements for HBES/BACS
used in industry environment
7.
I.S. EN 50540:2010
Conductors for overhead lines - Aluminium Conductors Steel Supported (ACSS)
8.
I.S. EN 61391-2:2010
Ultrasonics - Pulse-echo scanners -- Part 2: Measurement of maximum depth of
penetration and local dynamic range
9.
I.S. EN 62489-1:2010
Electroacoustics - Audio-frequency induction loop systems for assisted hearing -- Part 1:
Methods of measuring and specifying the performance of system components
10. I.S. EN 60728-1-1:2010
"Cable networks for television signals, sound signals and interactive services -- Part 1-1:
RF cabling for two way home networks"
11. I.S. EN 61760-3:2010
Surface mounting technology -- Part 3: Standard method for the specification of
components for Through Hole Reflow (THR) soldering
Date
Page 1
Download PDF
Similar pages