QuickSpecs
HP 5500 HI Switch Series
Overview
Models
HP 5500-24G-4SFP HI Switch with 2 interface Slots
HP 5500-48G-4SFP HI Switch with 2 interface Slots
JG311A
JG312A
Key features
High expandability for investment protection
Premium resiliency and integrated management
Enhanced MPLS/VPLS support
Full-featured IPv4/IPv6 dual stack
Dual power supplies for high resiliency
Product overview
The HP 5500 HI Series of Gigabit Ethernet switches delivers outstanding resiliency, security, and multiservice support capabilities at
the edge layer of data center, large campus, and metro Ethernet networks. The switches can also be used in the core layer of SMB
networks. The HP 5500 HI Switch Series supports dual power supply and IRF virtual fabric to provide the highest levels of resiliency
and manageability. With complete IPv4/IPv6 and MPLS/VPLS features, the series provides investment protection with an easy
transition from IPv4 to IPv6 networks. Designed with two fixed 10G ports and extension flexibility, these switches can provide up to six
10-GbE uplink or 70 GbE ports.
Features and benefits
Quality of Service (QoS)
Advanced classifier-based QoS:
QoS classifies traffic using multiple match criteria based on Layer 2, 3, and 4 information; applies
QoS policies such as setting priority level and rate limit to selected traffic on a per-port or per-VLAN basis
Traffic policing:
policing supports Committed Access Rate (CAR) and line rate
Powerful QoS feature:
feature creates traffic classes based on access control lists (ACLs), IEEE 802.1p precedence, IP, DSCP or Type
of Service (ToS) precedence; supports filter, redirect, mirror, or remark; supports the following congestion actions: strict priority
(SP) queuing, weighted round robin (WRR), weighted fair queuing (WFQ), weighted random early discard (WRED), weighted
deficit round robin (WDRR), and SP+WDRR
Storm restraint:
restraint allows limitation of broadcast, multicast, and unknown unicast traffic rate to cut down on unwanted broadcast
traffic on the network
Management
Friendly port names:
names allow assignment of descriptive names to ports
sFlow (RFC 3176): provides scalable ASIC-based wire-speed network monitoring and accounting with no impact on network
performance; this allows network operators to gather a variety of sophisticated network statistics and information for capacity
planning and real-time network monitoring purposes
Complete session logging:
logging provides detailed information for problem identification and resolution
Remote configuration and management:
management is available through a secure Web browser or a command-line interface (CLI)
Manager and operator privilege levels:
levels enable read-only (operator) and read-write (manager) access on CLI and Web
browser management interfaces
Management VLAN:
VLAN segments traffic to and from management interfaces, including CLI/telnet, a Web browser interface, and
SNMP
Command authorization:
authorization leverages RADIUS to link a custom list of CLI commands to an individual network administrator's
DA - 14201
Worldwide — Version 2 — February 13, 2012
Page 1
QuickSpecs
HP 5500 HI Switch Series
Overview
login; also provides an audit trail
Secure Web GUI:
GUI provides a secure, easy-to-use graphical interface for configuring the module via HTTPS
SNMPv1, v2c, and v3:
v3 facilitate centralized discovery, monitoring, and secure management of networking devices
Remote monitoring (RMON): uses standard SNMP to monitor essential network functions; supports events, alarm, history, and
statistics group plus a private alarm extension group
Remote Intelligent Mirroring:
Mirroring mirrors ingress/egress ACL-selected traffic from a switch port or VLAN to a local or remote
switch port anywhere on the network
In-service software upgrade (ISSU): enables operators to perform upgrades in the shortest possible amount of time with
minimal risk to network operations or traffic disruptions
Connectivity
Auto-MDIX:
Auto-MDIX automatically adjusts for straight-through or crossover cables on all 10/100 and 10/100/1000 ports
Packet storm protection:
protection protects against broadcast, multicast, or unicast storms with user-defined thresholds
Ethernet OAM:
OAM provides a Layer 2 link performance and fault detection monitoring tool, which reduces failover and network
convergence times
Flow control:
control using standard IEEE 802.3x, it provides back pressure to reduce congestion in heavy traffic situations
Fixed 10 GbE ports:
ports two fixed SFP+ ports provide a 20 GbE connection to the network without the need for additional
extension interface modules
Optional 10 GbE ports:
ports through the use of optional modules, additional 10 GbE connections are available for uplinks or
high-bandwidth server connections; flexibly supports XFP, SFP+, or CX4 local connections
Optional 8-port SFP module:
module add up to eight additional wire-speed Gigabit ports for unprecedented Gigabit density in a
single 1U enclosure
Jumbo packet support:
support supports up to 9216-byte frame size to improve the performance of large data transfers
Performance
Hardware-based wire-speed access control lists (ACLs): feature-rich ACL implementation (TCAM-based) helps ensure high
levels of security and ease of administration without impacting network performance
Nonblocking architecture:
architecture up to 224 Gbps nonblocking switching fabric provides wire-speed switching with up to 167 million
pps throughput
Resiliency and high availability
Virtual Router Redundancy Protocol (requires Premium License): allows groups of two routers to dynamically back each other
up to create highly available routed environments
Separate data and control paths:
paths keeps control separated from services and keeps service processing isolated; increases
security and performance
Device Link Detection Protocol (DLDP): monitors link connectivity and shuts down ports at both ends if unidirectional traffic is
detected, preventing loops in STP-based networks
Intelligent Resilient Framework (IRF): creates virtual resilient switching fabrics, where two or more switches perform as a single
Layer 2 switch and Layer 3 router; switches do not have to be co-located and can be part of a disaster-recovery system;
servers or switches can be attached using standard LACP for automatic load balancing and high availability; simplifies
network operation by eliminating the complexity of Spanning Tree Protocol, Equal-Cost Multipath (ECMP), or VRRP
Rapid Ring Protection Protocol (RRPP): connects multiple switches in a high-performance ring using standard Ethernet
technology; traffic can be rerouted around the ring in less than 50 ms, reducing the impact on traffic and applications
Smart link:
link allows 50 ms failover between links
Virtual Router Redundancy Protocol (VRRP): allows groups of two routers to dynamically back each other up to create highly
available routed environments
External redundant power supply:
supply provides high reliability
Manageability
DA - 14201
Worldwide — Version 2 — February 13, 2012
Page 2
QuickSpecs
HP 5500 HI Switch Series
Overview
Dual flash images:
images provides independent primary and secondary operating system files for backup while upgrading
Multiple configuration files:
files allow multiple configuration files to be stored to a flash image
IEEE 802.1AB Link Layer Discovery Protocol (LLDP): automated device discovery protocol provides easy mapping using
network management applications
Troubleshooting:
Troubleshooting ingress and egress port monitoring enable network problem solving; Virtual Cable Tests provide visibility
into cable problems
IPv6 management:
management future-proofs networking, as the switch is capable of being managed whether the attached network is
running IPv4 or IPv6; supports pingv6, tracertv6, Telnetv6, TFTPv6, DNSv6, and ARPv6
Layer 2 switching
GARP VLAN Registration Protocol:
Protocol allows automatic learning and dynamic assignment of VLANs
IP multicast snooping and data-driven IGMP:
IGMP automatically prevents flooding of IP multicast traffic
Jumbo packet support:
support supports up to 9220-byte frame size to improve the performance of large data transfers
Internet Group Management Protocol (IGMP) and Multicast Listener Discovery (MLD) protocol snooping:
snooping effectively control
and manage the flooding of multicast packets in a Layer 2 network
32K MAC addresses:
addresses provide access to many Layer 2 devices
IEEE 802.1ad QinQ and Selective QinQ:
QinQ increase the scalability of an Ethernet network by providing a hierarchical
structure; connect multiple LANs on a high-speed campus or metro network
10 GbE port aggregation:
aggregation allows grouping of ports to increase overall data throughput to a remote device
Spanning Tree/MSTP, RSTP, and STP Root Guard:
Guard prevent network loops
Layer 3 services
Loopback interface address:
address defines an address in Routing Information Protocol (RIP) and OSPF that can always be
reachable, improving diagnostic capability
Address Resolution Protocol (ARP): determines the MAC address of another IP host in the same subnet; supports static ARPs;
gratuitous ARP allows detection of duplicate IP addresses; proxy ARP allows normal ARP operation between subnets or when
subnets are separated by a Layer 2 network
Dynamic Host Configuration Protocol (DHCP): simplifies the management of large IP networks and supports client and
server; DHCP Relay enables DHCP operation across subnets
User Datagram Protocol (UDP) helper function:
function allows UDP broadcasts to be directed across router interfaces to specific IP
unicast or subnet broadcast addresses and prevents server spoofing for UDP services such as DHCP
Layer 3 routing
IPv4 routing protocols:
protocols support static routes, RIP, OSPF, ISIS, and BGP
IPv6 routing protocols:
protocols provide routing of IPv6 at wire speed; support static routes, RIPng, OSPFv3, IS-ISv6, and BGP4+ for
IPv6
PIM-SSM, PIM-DM, and PIM-SM (for IPv4 and IPv6): support IP Multicast address management and inhibition of DoS attacks
MPLS support:
support provides extended support of MPLS, including MPLS VPNs and MPLS Traffic Engineering (MPLS TE)
Virtual Private LAN Service (VPLS): establishes point-to-multipoint Layer 2 VPNs across a provider network
Bidirectional Forwarding Detection (BFD): enables link connectivity monitoring and reduces network convergence time for
RIP, OSPF, BGP, IS-IS, VRRP, MPLS, and IRF
Policy-based routing:
routing makes routing decisions based on policies set by the network administrator
Equal-Cost Multipath (ECMP): enables multiple equal-cost links in a routing environment to increase link redundancy and
scale bandwidth
IPv6 tunneling:
tunneling allows a smooth transition from IPv4 to IPv6 by encapsulating IPv6 traffic over an existing IPv4 infrastructure
Security
Access control lists (ACLs): provide IP Layer 2 to Layer 4 traffic filtering; support global ACL, VLAN ACL, port ACL, and IPv6
ACL
DA - 14201
Worldwide — Version 2 — February 13, 2012
Page 3
QuickSpecs
HP 5500 HI Switch Series
Overview
IEEE 802.1X:
802.1X industry-standard method of user authentication using an IEEE 802.1X supplicant on the client in conjunction
with a RADIUS server
MAC-based authentication:
authentication authenticates the client with the RADIUS server based on the client's MAC address
Identity-driven security and access control:
control
Per-user ACLs: permit or deny user access to specific network resources based on user identity and time of day,
allowing multiple types of users on the same network to access specific network services without risk to network security
or unauthorized access to sensitive data
Automatic VLAN assignment: automatically assigns users to the appropriate VLAN based on their identities
Port security:
security allows access only to specified MAC addresses, which can be learned or specified by the administrator
Secure FTP:
FTP allows secure file transfer to and from the switch; protects against unwanted file downloads or unauthorized
copying of a switch configuration file
STP BPDU port protection:
protection blocks Bridge Protocol Data Units (BPDUs) on ports that do not require BPDUs, preventing forged
BPDU attacks
DHCP protection:
protection blocks DHCP packets from unauthorized DHCP servers, preventing denial-of-service attacks
Dynamic ARP protection:
protection blocks ARP broadcasts from unauthorized hosts, preventing eavesdropping or theft of network data
STP Root Guard:
Guard protects the root bridge from malicious attacks or configuration mistakes
Guest VLAN:
VLAN similar to IEEE 802.1X, it provides a browser-based environment to authenticated clients
Port isolation:
isolation secures and adds privacy, and prevents malicious attackers from obtaining user information
IP Source Guard:
Guard helps prevent IP spoofing attacks
Endpoint Admission Defense (EAD): provides security policies to users accessing a network
RADIUS/HWTACACS:
RADIUS/HWTACACS eases switch management security administration by using a password authentication server
Secure management access:
access securely encrypts all access methods (CLI, GUI, or MIB) through SSHv2 and SNMPv3
Unicast Reverse Path Forwarding (URPF): allows normal packets to be forwarded correctly, but discards the attaching packet
due to lack of reverse path route or incorrect inbound interface; prevents source spoofing and distributed attacks; supports
distributed UFPF
Convergence
LLDP-MED (Media Endpoint Discovery): is a standard extension of LLDP that stores values for parameters such as QoS and
VLAN to automatically configure network devices such as IP phones
IEEE 802.1AB Link Layer Discovery Protocol (LLDP): is an automated device discovery protocol that provides easy mapping
of network management applications
Internet Group Management Protocol (IGMP): is used by IP hosts to establish and maintain multicast groups; supports v1, v2,
and v3; utilizes Any-Source Multicast (ASM) or Source-Specific Multicast (SSM) to manage IPv4 multicast networks
Multicast Source Discovery Protocol (MSDP): is used for inter-domain multicast applications, allowing multiple PIM-SM
domains to interoperate
Multicast Border Gateway Protocol (MBGP): allows multicast traffic to be forwarded across BGP networks and kept separate
from unicast traffic
Multicast VLAN:
VLAN allows multiple VLANs to receive the same IPv4 or IPv6 multicast traffic, reducing network bandwidth demand
by eliminating multiple streams to each VLAN
LLDP-CDP compatibility:
compatibility receives and recognizes CDP packets from Cisco's IP phones for seamless interoperation
Additional information
Green initiative support:
support provides support for RoHS and WEEE regulations
Green IT and power:
power use the latest advances in silicon development, shut off unused ports, and use variable-speed fans to
improve energy efficiency
Warranty and support
Lifetime warranty:
warranty for as long as you own the product with advance replacement and next-business-day delivery (available in
most countries)†
DA - 14201
Worldwide — Version 2 — February 13, 2012
Page 4
QuickSpecs
HP 5500 HI Switch Series
Overview
Electronic and telephone support:
support limited electronic and telephone support is available from HP; to reach our support
centers, refer to www.hp.com/networking/contact-support; for details on the duration of support provided with your product
purchase, refer to www.hp.com/networking/warrantysummary
Software releases:
releases to find software for your product, refer to www.hp.com/networking/support; for details on the software
releases available with your product purchase, refer to www.hp.com/networking/warrantysummary
†Hardware warranties replacement for as long as you own the product, with next business day advance replacement (available in
most countries). The disk drive included with HP AllianceONE Advanced Services and Services zl Modules, HP Threat Management
Services zl Module, HP Extended Services zl Module with Riverbed Steelhead RiOS Application, HP MSM765 zl Premium Mobility
Controller and HP Survivable Branch Communication zl Module powered by Microsoft® Lync has a five-year hardware warranty. For
details, refer to the Software license and hardware warranty statements at www.hp.com/networking/warranty.
DA - 14201
Worldwide — Version 2 — February 13, 2012
Page 5
QuickSpecs
HP 5500 HI Switch Series
Technical Specifications
HP 5500-24G-4SFP HI Switch with 2 interface Slots (JG311A)
24 RJ-45 autosensing 10/100/1000 ports (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type 100BASE-TX,
Ports
IEEE 802.3ab Type 1000BASE-T); Media Type: Auto-MDIX; Duplex: 10BASE-T/100BASE-TX: half or full;
1000BASE-T: full only
4 SFP fixed Gigabit Ethernet SFP ports
2 port expansion module slots
1 RJ-45 serial console port
2 SFP+
Supports a maximum of 24 autosensing 10/100/1000 ports
2 power supply slots
Power supplies
1 minimum power supply required (ordered separately)
14.17(d) x 17.32(w) x 1.72(h) in. (36 x 44 x 4.36 cm) (1U height)
Physical characteristics
Dimensions
16.53 lb. (7.5 kg), Fully loaded
Weight
1 GB SDRAM, 512 MB flash; packet buffer size: 3 MB
Memory and processor
Mounts in an EIA-standard 19 in. telco rack or equipment cabinet (hardware included)
Mounting
< 5 µs
Performance
1000 Mb Latency
< 3 µs
10 Gbps Latency
130.9 million pps
Throughput
176 Gbps
Routing/Switching
capacity
12000 entries
Routing table size
32°F to 122°F (0°C to 50°C)
Environment
Operating temperature
5% to 95%, noncondensing
Operating relative
humidity
-40°F to 158°F (-40°C to 70°C)
Nonoperating/Storage
temperature
5% to 95%, noncondensing
Nonoperating/Storage
relative humidity
Low-speed fan: 47.9 dB, High-speed fan: 51.1 dB
Acoustic
Electrical characteristics Maximum heat dissipation 481 BTU/hr (507.46 kJ/hr)
141 W
Maximum power rating
50/60 Hz
Frequency
Maximum power rating and maximum heat dissipation are the worst-case
Notes
theoretical maximum numbers provided for planning the infrastructure with
fully loaded PoE (if equipped), 100% traffic, all ports plugged in, and all
modules populated.
UL 60950-1; EN 60825-1 Safety of Laser Products-Part 1; EN 60825-2 Safety of Laser Products-Part 2;
Safety
IEC 60950-1; CAN/CSA-C22.2 No. 60950-1; EN 60950-1/A11; FDA 21 CFR Subchapter J; ROHS
Compliance
3-year, 4-hour onsite, 13x5 coverage for hardware (UV870E)
Services
3-year, 4-hour onsite, 24x7 coverage for hardware (UV873E)
3-year, 4-hour onsite, 24x7 coverage for hardware, 24x7 SW phone support and SW updates (UV876E)
3-year, 24x7 SW phone support, software updates (UV879E)
1-year, post-warranty, 4-hour onsite, 13x5 coverage for hardware (HR574E)
DA - 14201
Worldwide — Version 2 — February 13, 2012
Page 6
QuickSpecs
HP 5500 HI Switch Series
Technical Specifications
1-year, post-warranty, 4-hour onsite, 24x7 coverage for hardware (HR575E)
1-year, post-warranty, 4-hour onsite, 24x7 coverage for hardware, 24x7 software phone support
(HR576E)
Installation with minimum configuration, system-based pricing (UW451E)
4-year, 4-hour onsite, 13x5 coverage for hardware (UV871E)
4-year, 4-hour onsite, 24x7 coverage for hardware (UV874E)
4-year, 4-hour onsite, 24x7 coverage for hardware, 24x7 software phone (UV877E)
4-year, 24x7 SW phone support, software updates (UV880E)
5-year, 4-hour onsite, 13x5 coverage for hardware (UV872E)
5-year, 4-hour onsite, 24x7 coverage for hardware (UV875E)
5-year, 4-hour onsite, 24x7 coverage for hardware, 24x7 software phone (UV878E)
5-year, 24x7 SW phone support, software updates (UV881E)
3 Yr 6 hr Call-to-Repair Onsite (UW966E)
4 Yr 6 hr Call-to-Repair Onsite (UW967E)
5 Yr 6 hr Call-to-Repair Onsite (UW968E)
1-year, 6 hour Call-To-Repair Onsite for hardware (HR578E)
1-year, 24x7 software phone support, software updates (HR577E)
1-year, 24x7 software phone support, software updates + Next Business Day Hardware Exchange
(HS658E)
1-year, 24x7 software phone support, software updates + 4 hour hardware exchange (HS659E)
3-year, 24x7 software phone support, software updates + Next Business Day Hardware Exchange
(HS660E)
3-year, 24x7 software phone support, software updates + 4 hour Hardware Exchange (HS661E)
4-year, 24x7 software phone support, software updates + Next Business Day Hardware Exchange
(HS662E)
4-year, 24x7 software phone support, software updates + 4 hour Hardware Exchange (HS663E)
5-year, 24x7 software phone support, software updates + Next Business Day Hardware Exchange
(HS664E)
5-year, 24x7 software phone support, software updates + 4 hour Hardware Exchange (HS665E)
Refer to the HP website at: www.hp.com/networking/services for details on the service-level descriptions
and product numbers. For details about services and response times in your area, please contact your
local HP sales office.
HP 5500-48G-4SFP HI Switch with 2 interface Slots (JG312A)
48 RJ-45 autosensing 10/100/1000 ports (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type 100BASE-TX,
Ports
IEEE 802.3ab Type 1000BASE-T); Media Type: Auto-MDIX; Duplex: 10BASE-T/100BASE-TX: half or full;
1000BASE-T: full only
4 SFP fixed Gigabit Ethernet SFP ports
2 port expansion module slots
1 RJ-45 serial console port
2 SFP+
Supports a maximum of 48 autosensing 10/100/1000 ports
2 power supply slots
Power supplies
1 minimum power supply required (ordered separately)
16.54(d) x 17.32(w) x 1.72(h) in. (42 x 44 x 4.36 cm) (1U height)
Physical characteristics
Dimensions
18.74 lb. (8.5 kg)
Weight
1 GB SDRAM, 512 MB flash; packet buffer size: 6 MB
Memory and processor
DA - 14201
Worldwide — Version 2 — February 13, 2012
Page 7
QuickSpecs
HP 5500 HI Switch Series
Technical Specifications
Mounting
Performance
Environment
Electrical characteristics
Safety
Services
Mounts in an EIA-standard 19 in. telco rack or equipment cabinet (hardware included)
< 5 µs
1000 Mb Latency
< 3 µs
10 Gbps Latency
166.6 million pps
Throughput
224 Gbps
Routing/Switching
capacity
12000 entries
Routing table size
32°F to 122°F (0°C to 50°C)
Operating temperature
5% to 95%, noncondensing
Operating relative
humidity
-40°F to 158°F (-40°C to 70°C)
Nonoperating/Storage
temperature
5% to 95%, noncondensing
Nonoperating/Storage
relative humidity
Low-speed fan: 48.6 dB, High-speed fan: 57.6 dB
Acoustic
Maximum heat dissipation 651 BTU/hr (686.81 kJ/hr)
191 W
Maximum power rating
50/60 Hz
Frequency
Maximum power rating and maximum heat dissipation are the worst-case
Notes
theoretical maximum numbers provided for planning the infrastructure with
fully loaded PoE (if equipped), 100% traffic, all ports plugged in, and all
modules populated.
UL 60950-1; EN 60825-1 Safety of Laser Products-Part 1; EN 60825-2 Safety of Laser Products-Part 2;
IEC 60950-1; CAN/CSA-C22.2 No. 60950-1; EN 60950-1/A11; FDA 21 CFR Subchapter J; ROHS
Compliance
3-year, 4-hour onsite, 13x5 coverage for hardware (HQ080E)
3-year, 4-hour onsite, 24x7 coverage for hardware (HQ081E)
3-year, 4-hour onsite, 24x7 coverage for hardware, 24x7 SW phone support and SW updates
(HQ084E)
3-year, 24x7 SW phone support, software updates (HQ083E)
1-year, post-warranty, 4-hour onsite, 24x7 coverage for hardware (HR580E)
1-year, post-warranty, 4-hour onsite, 24x7 coverage for hardware, 24x7 software phone support
(HR581E)
Installation with minimum configuration, system-based pricing (UW451E)
4-year, 4-hour onsite, 13x5 coverage for hardware (HQ085E)
4-year, 4-hour onsite, 24x7 coverage for hardware (HQ086E)
4-year, 4-hour onsite, 24x7 coverage for hardware, 24x7 software phone (HQ093E)
4-year, 24x7 SW phone support, software updates (HQ091E)
5-year, 4-hour onsite, 13x5 coverage for hardware (HQ088E)
5-year, 4-hour onsite, 24x7 coverage for hardware (HQ089E)
5-year, 4-hour onsite, 24x7 coverage for hardware, 24x7 software phone (HQ094E)
5-year, 24x7 SW phone support, software updates (HQ092E)
3 Yr 6 hr Call-to-Repair Onsite (HQ082E)
4 Yr 6 hr Call-to-Repair Onsite (HQ087E)
5 Yr 6 hr Call-to-Repair Onsite (HQ090E)
1-year, 4-hour onsite, 13x5 coverage for hardware (HR579E)
1-year, 6 hour Call-To-Repair Onsite for hardware (HR583E)
DA - 14201
Worldwide — Version 2 — February 13, 2012
Page 8
QuickSpecs
HP 5500 HI Switch Series
Technical Specifications
1-year, 24x7 software phone support, software updates (HR582E)
1-year, 24x7 software phone support, software updates + Next Business Day Hardware Exchange
(HS674E)
1-year, 24x7 software phone support, software updates + 4 hour hardware exchange (HS675E)
3-year, 24x7 software phone support, software updates + Next Business Day Hardware Exchange
(HS676E)
3-year, 24x7 software phone support, software updates + 4 hour Hardware Exchange (HS677E)
4-year, 24x7 software phone support, software updates + Next Business Day Hardware Exchange
(HS678E)
4-year, 24x7 software phone support, software updates + 4 hour Hardware Exchange (HS679E)
5-year, 24x7 software phone support, software updates + Next Business Day Hardware Exchange
(HS680E)
5-year, 24x7 software phone support, software updates + 4 hour Hardware Exchange (HS681E)
Refer to the HP website at: www.hp.com/networking/services for details on the service-level descriptions
and product numbers. For details about services and response times in your area, please contact your
local HP sales office.
DA - 14201
Worldwide — Version 2 — February 13, 2012
Page 9
QuickSpecs
HP 5500 HI Switch Series
Accessories
HP 5500 HI Switch Series Modules
accessories
HP 5500 2-port 10GbE XFP Module
HP 5500 2-port 10GbE Local Connect Module
HP 5500 1-port 10GbE XFP Module
HP 5500/4800 2-port GbE SFP Module
HP 5500/5120 2-port 10GbE SFP+ Module
HP 5500 HI 8-port Gig-T Module
HP 5500 HI 8-port SFP Module
Transceivers
HP X125 1G SFP LC LH40 1310nm Transceiver
HP X120 1G SFP LC LH40 1550nm Transceiver
HP X125 1G SFP LC LH70 Transceiver
HP X120 1G SFP RJ45 T Transceiver
HP X110 100M SFP LC LH40 Transceiver
HP X110 100M SFP LC LH80 Transceiver
HP X130 10G SFP+ LC SR Transceiver
HP X130 10G SFP+ LC LRM Transceiver
HP X130 10G SFP+ LC LR Transceiver
HP X240 10G SFP+ to SFP+ 0.65m Direct Attach Copper Cable
HP X240 10G SFP+ to SFP+ 1.2m Direct Attach Copper Cable
HP X240 10G SFP+ to SFP+ 3m Direct Attach Copper Cable
HP X120 1G SFP LC BX 10-U Transceiver
HP X120 1G SFP LC BX 10-D Transceiver
HP X110 100M SFP LC FX Transceiver
HP X130 10G XFP LC LR Transceiver
HP X130 10G XFP LC SR Transceiver
HP X120 1G SFP LC SX Transceiver
HP X110 100M SFP LC LX Transceiver
HP X135 10G XFP LC ER Transceiver
HP X110 100M SFP LC FX Dual Mode Transceiver
HP X110 100M SFP LC LX10 Transceiver
HP X120 1G SFP LC LX Transceiver
Cables
HP 0.5 m Multimode OM3 LC/LC Optical Cable
HP 1 m Multimode OM3 LC/LC Optical Cable
HP 2 m Multimode OM3 LC/LC Optical Cable
HP 5 m Multimode OM3 LC/LC Optical Cable
HP 15 m Multimode OM3 LC/LC Optical Cable
HP 30 m Multimode OM3 LC/LC Optical Cable
HP 50 m Multimode OM3 LC/LC Optical Cable
HP 0.5 m PremierFlex OM3+ LC/LC Optical Cable
HP 1 m PremierFlex OM3+ LC/LC Optical Cable
HP 2 m PremierFlex OM3+ LC/LC Optical Cable
HP 5 m PremierFlex OM3+ LC/LC Optical Cable
HP 15 m PremierFlex OM3+ LC/LC Optical Cable
DA - 14201
Worldwide — Version 2 — February 13, 2012
JD359B
JD360B
JD361B
JD367A
JD368B
JG313A
JG314A
JD061A
JD062A
JD063B
JD089B
JD090A
JD091A
JD092B
JD093B
JD094B
JD095C
JD096C
JD097C
JD098B
JD099B
JD102B
JD108B
JD117B
JD118B
JD120B
JD121A
JD497A
JD498A
JD119B
AJ833A
AJ834A
AJ835A
AJ836A
AJ837A
AJ838A
AJ839A
BK837A
BK838A
BK839A
BK840A
BK841A
Page 10
QuickSpecs
HP 5500 HI Switch Series
Accessories
HP 30 m PremierFlex OM3+ LC/LC Optical Cable
HP 50 m PremierFlex OM3+ LC/LC Optical Cable
HP X230 Local Connect 50cm CX4 Cable
HP X230 Local Connect 100cm CX4 Cable
HP X230 CX4 to CX4 3m Cable
Power Supply
HP 5800/5500 150W AC Power Supply
HP 5800/5500 150W DC Power Supply
BK842A
BK843A
JD363B
JD364B
JD365A
JD362A
JD366A
To learn more, visit: www.hp.com/networking
© Copyright 2012 Hewlett-Packard Development Company, L.P. The information contained herein is subject to change without
notice. The only warranties for HP products and services are set forth in the express warranty statements accompanying such
products and services. Nothing herein should be construed as constituting an additional warranty. HP shall not be liable for
technical or editorial errors or omissions contained herein.
DA - 14201
Worldwide — Version 2 — February 13, 2012
Page 11
Download PDF
Similar pages