IP 66 EXTRA-Ex-LED

LIGHTING FIXTURES FOR POTENTIALLY EXPLOSIVE ATMOSPHERES ZONE 1, 21
EXTRA-Ex-LED
IP 66
Application: dustproof lighting fixture with resistance against water jets is designed for lighting premises with
danger of explosion. Lighting fixture is certified by FTZÚ Ostrava-Radvanice (certificate FTZÚ 16 ATEX 0167X).
Ballast: electronic 110 – 254V, 50/60Hz
220 – 250V, 0Hz
Body: Plastic material PC (polycarbonate), grey colour RAL7035, chemical resistence
Cover: Plastic opal material PC (polycarbonate), chemical resistance
Fastening: Direct fastening on ceiling or wall lighted area by means of ceiling fastening brackets (basic equipment)
Connection: Screwless three-pole terminal block, max. diameter of wires 2,5 mm2; lighting fixture is ready to
connect two wires (order additional cable gland)
Standard equipment: 1 pc sealing cable gland, 3 pcs sealing plug, 2 pcs fastening spring, double clamp for
power cables, stainless steel clips
On request: 1F/3F – one or three phase through-wiring connection
Em – non-maintained emergency lighting (1,5 h, 3 h)
MULTI – maintained emergency lighting (1,5 h, 3 h)
NANO-protection by means of special NANO layers
(hydrophobia, oilphobia, antibacterial protection)
LED
1F 3F
ta
-20˚C
ATEX
EVG
110-254V
AxBxCxDxE
(mm)
(W)**
(Im)
Tc/λ
220-250V
-20°C < ta <+50°C
UV
055290
EXTRA-Ex-LED-2500-218-4K
4000
2360
28
670 x 460
STABIL
055291
EXTRA-Ex-LED-5000-236-4K
4000
4650
55
1280 x 880
Tc/λ
(lm/em)
(W)**
AxBxCxDxE
(mm)
ta 50˚C
155
A
B
-maintained emergency mode 1,5h;3h, 0°C < ta <+40°C
105
055294
MULTIEXTRA-Ex-LED-5000-236-4K, 1h
4000
4650/10%
55
1280 x 880
055295
MULTIEXTRA-Ex-LED-5000-236-4K, 3h
4000
4650/5,5%
55
1280 x 880
Tc/λ
(lm/em)
(W)**
AxBxCxDxE
(mm)
-non-maintained emergency mode 1,5h;3h, 0°C < ta <+40°C
EXTRA-Ex-Em-LED-5000-236-4K, 1h
4000
476
-
1280 x 880
055293
EXTRA-Ex-Em-LED-5000-236-4K, 3h
4000
260
-
1280 x 880
– special accessories
008060
Cable gland Ex M20x1,5
008090
Sealing plug Ex M20x1,5
008097
Plastic nut WISKA EMUG 20 M20x1,5
(lm)* - luminous flux, (W)** - input power
Type marking
EXTRA-Ex-LED, IP66
EXTRA-Ex-LED-XXXX-YYY
type for standard operation
MULTIEXTRA-Ex-LED-XXXX-YYY type for maintained emergency mode
EXTRA-Ex-Em-LED-XXXX-YYY
type for non-maintained emergency mode
XXXX*
luminous flux (lumen) 2500/5000
YYY*
type pf used housing 218/236
Application of light fixtures in areas with danger of explosion
C0-C180
C90-C270
Marking
of external
influences
Marking
Classification areas
Danger of explosion
of flammable dust
BE3N1
ZONE 21,22
Danger of explosion of
flammable gases and vapors
BE3N2
ZONE 1,2
Formation prescription
ČSN EN 60079-14
ČSN EN 60079-10-2
ČSN EN 60079-14
ČSN EN 60079-10-1
EXTRA-Ex-LED
II 2G Ex eb mb op is IIC T4 Gb
II 2D Ex tb IIIC T67°C Db
For areas with with the appearance of oily emulsions,
aggressive chemicals, vibration, mechanical stress
we recommend to use the fixtures series PITBUL-Ex (LED),
RAMBO-Ex, AQUA-Ex, EXTEND-Ex (LED).
www.vyrtych.com
LIGHTING FIXTURES FOR POTENTIALLY EXPLOSIVE ATMOSPHERES ZONE 1, 21
055292
Download PDF
Similar pages