Rackmount SATA to USB 3.0 Converter
Model: ADSAU3RM
INTRODUCTION
The rackmount SATA to USB 3.0 Converter is a perfect solution for turning any SATA device into the latest USB 3.0
(Superspeed) or ubiquitous USB 2.0 port. SATA I, SATA II, and SATA III hard drives, SSD (Solid State Drive), and
even optical drives can now be easily converted into the blazing fast USB 3.0 interface. Comes mounted on a
SCIS-I bracket, this small converter can be easily mount onto any storage enclosure with standard SCSI-1
(Centronic 50 ) cut out or standard Desktop computer chassis by adding an optional PCI mounting bracket.
Below is an illustration of the installation of this converter onto
different Addoncis storage enclosure or similar
1. Converter mounted inside Addonics Storage Tower
2. converter mounted inside the Addonics 5 1/4" Z enclosure
3. Add USB 3.0/2.0 connectivity to your external enclosure
with PCI slot opening.
www.addonics.com
Addonics Technologies Inc.
1918 Junction Avenue, San Jose, CA 95131
Phone: 408.573.8580 | Fax: 408.573.8588
Rackmount SATA to USB 3.0 Converter
Model: ADSAU3RM
FEATURES
• Convert any type of SATA device including hard drives, SSD, and optical drives into the latest Superspeed USB
3.0 interface
• Superspeed USB 3.0 Type B connector supporting up to 5Gbps maximum throughput
• Port Multiplier compatible - easily convert a RAID volume to USB 3.0 interface
• Connect multiple hard drives to USB port when combines with HPM-XA
• Come with mounting bracket to install into enclosures with SCSI-1 (Centronic 50) cut out
• Optional PCI mounting bracket for installing onto standard Desktop PC chassis
• Compatible with SATA I, SATA II, and SATA III devices
• Supports SuperSpeed (5 Gbps), HighSpeed (480 Mbps), FullSpeed (12 Mbps), and LowSpeed (1.5 Mbps)
transaction
• Backwards compatible to USB 2.0 ports
• LED pins for indicating power and drive activity
SPECIFICATIONS
• USB 3.0 Type B upstream connector on board
• Compliant with Universal Serial Bus 3.0 Specification Revision 1.0
• Supports SuperSpeed (5 Gbps), HighSpeed (480 Mbps), FullSpeed (12 Mbps), and LowSpeed (1.5 Mbps)
transaction
• Compliant with Serial ATA Specification Revision 2.6
• Port Multiplier compatible
• Supports Serial ATA transfer rate of 3.0 Gbps
• Supports ATA/ATAPI Packet Command Set
• Supports ATA/ATAPI LBA 48 Addressing mode
• Pin header on board for accessing LED
• Dimensions: 84mm(W) x 37mm(D) x 24mm(H)
• Weight: 52g
• Operating temperature range: 0 °C to +70 °C
• Operating humidity range: 5% to 90%
• Storage temperature range: -40 °C to +85 °C
• Storage humidity range: 5% - 95% (non condensing)
• 1 year warrnty
• Fully RoHS compliance
www.addonics.com
Addonics Technologies Inc.
1918 Junction Avenue, San Jose, CA 95131
Phone: 408.573.8580 | Fax: 408.573.8588
Download PDF
Similar pages