Optical Measuring Magnifiers Pages 484 to 486 Stereo Microscopes

Optical Measuring
Magnifiers
Pages 484 to 486
Stereo Microscopes
Pages 487 to 490
Measuring Microscopes
Finescopes, Microscope Units and Objective lenses
Pages 491 to 518
Profile Projectors
Pages 519 to 530
Profile Projector Accessories
Pages 531 to 537
The prices listed are suggested retail prices (valid until 31st May 2012). Inch products and combined inch/metric products are generally intended
for sale to the United Kingdom only. All products are intended to be sold to commercial customers. Therefore VAT is not included.
* Please contact Mitutoyo for more information on delivery times.
483
Precision Magnifier
Series 183
Specifications
Precision Magnifier
• For measuring length, diameters, line thickness, thread pitches, etc.
• Quick replacement of the reticles.
• Easy measurement.
Measuring plate
diameter (mm)
Delivered
950757
(optional illuminator)
Pocket Comparators Set in box
(including magnifier and reticles)
Optional accessories
No.
353489
950757
183-101
30
Description
Battery LR14
Magnifier holder with illumination
(without battery)
183-102
183-103
183-104
183-105
183-106
183-107
183-108
183-109
183-110
183-111
183-112
183-113
183-114
183-115
Pocket Comparators
No.
Magnification Field of View (mm) Dimensions (mm) Mass (g)
183-101
8X
24.5
Ø 37 x 48
40
183-131
10X
24.5
Ø 37 x 45
42
Pocket Comparators Set (including magnifier and reticles)
No.
Set compilation
183-902 183‑101, 183‑102, 183‑106, 183‑107, 183‑112, 183‑113, 183‑114
183-903 183‑101, 183‑102, 183‑106, 183‑107, 183‑109, 183‑113, 183‑115
183-904
183‑101, 183‑102
Reticles for Pocket Comparators
No.
Description
Diameter 0,1; 0,2; 0,3; 0,4; 0,5; 0,6; 0,7; 1,5; 3 mm
Grid 0.3”; 0.4” (Pitch 0.025”)
183-102
Radius 0 – 10 mm (Pitch 0,5 mm)
Angle 0 – 90° (Pitch 1°)
Scale 0 – 10 mm (Pitch 0,1 mm)
Angle 0 – 90° (Reading 0–80° = 5°; 80–90° = 1°
Radius 0 – 10 mm, (Reading 0,1 mm); 0 – 5” (Pitch 0.5”)
183-103
Diameter 0,1–1,0 mm; 0.005”; 0.01”; 0.02”; 0.03”; 0.04”; 0.05”; 1⁄64”; 1⁄32”; 3⁄60”; 1⁄16”
Angle 29°; 55°; 60°; 118°
183-104
Thickness 0,02 – 0,16 mm (Pitch 0,01 mm)
Angle 0 – 90° (Reading 0–10° = 1°; 10–90° = 5°)
Radius 0 – 10 mm (Reading 0,5 mm)
183-105
Diameter 0,1–1,0 mm (Reading 0,1 mm)
Scale 0 – 10 mm (Reading 0,1 mm)
Grid 5 – 10 mm (Reading 1 mm)
Angle 0 – 90° (Pitch 5°)
Radius 1⁄16”; 3⁄32”; 1⁄8”; 5⁄32”; 3⁄16”; 7⁄32”; 1⁄4”; 9⁄32”; 5⁄16”; 11⁄32”; 3⁄8”
183-106
Diameter 0.002”; 0.005”; 0.01”; 0.02”; 0.04”; 0.05”
Scale 1⁄4”; 1⁄8”; 1⁄16”; 3⁄16”; 1⁄32”; 3⁄32”; 1⁄64”; 3⁄64”
Angle 0 – 90° (Reading 0–80° = 5°; 80–90° = 1°)
183-107
Radius 0 – 10 mm (Reading 0–1 mm = 0,1 mm; 1–10 mm = 0,5 mm)
Scale 0 – 3⁄8”
Grid 10 mm (Reading 0,5 mm)
183-108
Diameter 0,1; 0,2; 0,3; 0,4; 0,5; 0,6; 0,7; 0,8; 0,9: 1,0; 1,5; 2,0; 2,5 mm
183-109
Scale 0 – 20 mm (Reading 0.1 mm)
Angle 0 – 180° (Reading 1°)
183-110
Radius 0 – 10 mm (Reading 0,5 mm)
183-111
Thread pitches 0,25; 0,3; 0,35; 0,4; 0,45; 0,6; 0,75; 0,9; 10 mm
183-112
Thread pitches 50”; 32”; 28”; 24”; 20”; 18”; 16”; 14”; 8”
Angle 0 – 90° (Reading 1°)
183-113
Radius 0 – 0.5” (Reading 0 – 0.5” = 0.005”)
Scale 0 – 10 mm (Reading 0,1 mm)
183-114
Scale 0 – 0.8” (Reading 0.005”)
183-115
ISO-Thread pitches 0,25; 0,3; 0,35; 0,4; 0,45; 0,5; 0,7; 0,8; 1,0 mm
484
The prices listed are suggested retail prices (valid until 31st May 2012). Inch products and combined inch/metric products are generally intended
for sale to the United Kingdom only. All products are intended to be sold to commercial customers. Therefore VAT is not included.
* Please contact Mitutoyo for more information on delivery times.
Pocket Magnifiers
Series 183 - Slim model
• Stable design, secure holding.
• Easy handling.
183-201
Magnification 25X
No.
Field of View
Dimensions
Mass
183-201
3,4 mm
ø14,5 x 125 mm 17g
Series 183 - Freestanding model
183-202
183-203
Magnification 25X
No.
Field of View
Dimensions
Mass
183-202
3,3 mm
ø31,5 x 115 mm 90 g
Magnification 50X
No.
Field of View
Dimensions
Mass
183-203
1,6 mm
ø31,5 x 100 mm 82 g
Series 183
• Clear Loupe Magnifiers.
• Transparent draw tube enables clear imaging of the workpiece.
183-303
183-301
183-302
Magnification 7X
No.
Field of View Dimensions Mass
183-301
25 mm
ø32 x 43 mm 17 g
Magnification 10X
No.
Field of View Dimensions Mass
183-302
24 mm
ø32 x 40 mm 18 g
Reticle (provided)
183-304
Magnification 15X
No.
Field of View Dimensions Mass
183-303
10 mm
ø32 x 30 mm 23 g
Magnification 8 - 16X zoom
No.
Field of View Dimensions Mass
183-304 10 - 20 mm ø45 x 70 mm 149 g
The prices listed are suggested retail prices (valid until 31st May 2012). Inch products and combined inch/metric products are generally intended
for sale to the United Kingdom only. All products are intended to be sold to commercial customers. Therefore VAT is not included.
* Please contact Mitutoyo for more information on delivery times.
485
Cold-light Illuminator
Consumable spares
Cold-light Illuminator and Conductors
No.
011315
Description
Lamp 8V, 30W for 011079-1
011336
011080-1
011079-1
(Swan neck light
conductor 011080-1 is optional)
Cold-Light Illuminator
No.
Input Output
011079-1 50 VA
35W
Light brightness
Filter insertion
Dimensions
Mass
control
Stepless
Lateral
168 x 120 x 268 mm 1.3 kg
Swan neck light Conductor
No.
Arm length Arm diameter
011080-1 550 mm
4 mm
Flexible light Conductor
No.
Arm length Arm diameter
011336* 1200 mm
7 mm
486
The prices listed are suggested retail prices (valid until 31st May 2012). Inch products and combined inch/metric products are generally intended
for sale to the United Kingdom only. All products are intended to be sold to commercial customers. Therefore VAT is not included.
* Please contact Mitutoyo for more information on delivery times.
MSM-400 Stereo Microscope
Specifications
Dimensions
151 x 285 x 343 mm
Additional Specifications
Transmitted
illumination
Light source for 377-926, 377-946,
377-966, 377-986 : Halogen bulb
(12V, 10W) with colour filter
Surface
illumination
Light source for 377-926, 377-946,
377-966, 377-986 : Halogen bulb
(12V, 15W)
Series 377 - MSM-412L, MSM-465L, MSM-Z414L and MSM-Z475TL
Stereo microscope with illumination
• Bright, sharp images with real depth are recreated with high resolution and excellent colour
fidelity, thus minimizing eye fatigue while increasing inspection efficiency and productivity.
• Easy change of magnification either by Turret or Zoom lens.
• Using the horizontal focusing wheels mounted on both sides of the unit, you can quickly bring
the object into focus regardless of whether you're right or left handed.
• The trinocular tube of the MSM-Z475TL allows easy attachment of a digital camera to save captured images of the object.
377-946
377-946
377-966
377-986
Model
MSM-412L
377-926D*
377-926E
10X, 20X
Binocular
MSM-Z414L
377-946D
377-946E
10X to 40X
Binocular
MSM-Z475TL
7.5X to 50X
Trinocular
MSM-465L
377-966D*
377-966E
6X, 12X, 25X, 50X
Binocular
54 - 76 mm
54 -76 mm
52 - 79 mm
54 - 76 mm
Eyepiece (optional)
WF5X/22, WF10X/20
(standard), WF15X/
13, WF20X/10
WF5X/22, WF10X/20
(standard), WF15X/
13, WF20X/10
WF10X/23 (standard),
WF5X/23, WF6,25X/
23, WF15X/17,
WF20X/13, WF32X/8
Objective lens
1X, 2X Turret, two
stage
1X to 4X (zoom
factor 4)
0.75X to 5X (zoom)
WF6,25X/23, WF10X/
23 (standard), WF15X/
17,6, WF20X/13,4,
WF32X/10
1.2X, 2.5X, 5X Turret,
four stage
-
0.5X, 0.75X, 1.5X
0.5X, 0.63X, 1.5X, 2X
0.6X, 1.2X, 2.5X, 5X
2.5X to 60X
2.5X to 120X
1.87X to 320X
3.75X to 320X
95 mm
80 mm
113 mm
89 mm
44 mm
93 mm
4.7
44 mm
95 mm
5.1
50 mm
130 mm
6.9
50 mm
95 mm
6.3
No.
Total magnification
Optical tube
Interpupillary distance
(adjustable)
Auxiliary objective
(optional)
Total magnification of
objective
Working distance of
objective
Height adjustment range
Max. workpiece height
Mass (kg)
UK only for all ref. in E, example : 377-926E
The prices listed are suggested retail prices (valid until 31st May 2012). Inch products and combined inch/metric products are generally intended
for sale to the United Kingdom only. All products are intended to be sold to commercial customers. Therefore VAT is not included.
* Please contact Mitutoyo for more information on delivery times.
487
377-986D
MSM-400 Stereo Microscope
Series 377 - MSM-412 and MSM-465 - Stereo microscope without illumination
• Bright, sharp images with real depth are recreated with high resolution and excellent colour
fidelity, thus minimizing eye fatigue while increasing inspection efficiency and productivity.
• Using the horizontal focusing wheels mounted on both sides of the unit, you can quickly bring
the object into focus regardless of whether you're right or left handed.
377-925K
377-925K
377-965K
Model
No.
Total magnification
Optical tube
Interpupillary distance
(adjustable)
Eyepiece (optional)
Objective lens
Auxiliary objective
(optional)
Total magnification of
objective
Working distance of
objective
Height adjustment range
Max. workpiece height
Mass (kg)
377-965K
MSM-412
377-925K
10X, 20X
Binocular
MSM-465
377-965K
6X, 12X, 25X, 50X
Binocular
54 - 76 mm
54 - 76 mm
WF5X/22, WF10X/20 (standard), WF15X/
13, WF20X/10
1X, 2X Turret, two stage
WF6,25X/23, WF10X/23 (standard), WF15X/17,6,
WF20X/13,4, WF32X/10
1.2X, 2.5X, 5X Turret, four stage
-
0.6X, 1.2X, 2.5X, 5X
2.5X to 60X
3.75X to 320X
95 mm
89 mm
44 mm
93 mm
4.9
50 mm
95 mm
6.3
488
The prices listed are suggested retail prices (valid until 31st May 2012). Inch products and combined inch/metric products are generally intended
for sale to the United Kingdom only. All products are intended to be sold to commercial customers. Therefore VAT is not included.
* Please contact Mitutoyo for more information on delivery times.
MSM-400 Stereo Microscope
Standard accessories
No.
011514
Series 377 - Accessories
Description
Power supply unit for (MSM-Z414L)
Optional accessories
No.
377-070
377-065
176-344CED
176-344CEE
Adapters
377-092
377-091D
Description
Eye Cap ø35
Eye Cap ø32.5
Bifurcated fibre illumination
Bifurcated fibre illumination UK only
Ring-type unit connecting ring (for
MSM-Z414)
Ring-type unit connecting ring (for
MSM-412)
C-Mount Adapter for MSM-465
377-094D
Lighting
377-090-1DD Ring-type fluorescent illumination unit
377-090-1E Ring-type fluorescent illumination unit
UK only
Objective lenses
377-082D
Auxiliary lens systems 1.5X
377-000-106 Auxiliary lens systems 0.3X
D
377-000-107 Auxiliary lens systems 0.625X
D
377-045D
Auxiliary lens systems 0.5X
377-046D
Auxiliary lens systems 0.75X
377-047D
Auxiliary lens systems 1.5X
377-076D
Auxiliary lens systems 0.5X
377-077D
Auxiliary lens systems 1.5X
377-078D
Auxiliary lens systems 2X
377-080D
Auxiliary lens systems 0.5X
377-081D
Auxiliary lens systems 0.63X
377-083D
Auxiliary lens systems 2X
Oculars
377-026
Eyepiece WF 5X
377-027
Eyepiece WF 10X
377-028
Eyepiece WF 15X
377-029
Eyepiece WF 20X
377-066
Eyepiece WF 6.25X
377-067
Eyepiece WF15X
377-068
Eyepiece WF 20X
377-069
Eyepiece WF 32X
377-071
Eyepiece SWF 10X
377-072D
Eyepiece SWF 10X/23
377-030D
Eyepiece EF10X/20
Stands
377-007D
Stand for stereomicroscope
377-107D
Mount (MSM-465)
Consumable spares
No.
011534
Description
Cleaner for optics
377-030D - 377-072D
() dimensions apply to 377-072D
The prices listed are suggested retail prices (valid until 31st May 2012). Inch products and combined inch/metric products are generally intended
for sale to the United Kingdom only. All products are intended to be sold to commercial customers. Therefore VAT is not included.
* Please contact Mitutoyo for more information on delivery times.
377-026
489
377-028
377-029
377-045D
Accessories for Stereo Microscope
Ring Light
Optional accessories
• The ring light provides additional, intensive, fluorescent illumination. This type of light source
prevents colour errors in the image caused by the colour characteristics of the illumination. The
ring-shaped positioning of the light source around the objective ensures even illumination of
the subject without interfering shadows.
No.
377-092
377-091D
Description
Ring-type unit connecting ring (for
MSM-Z414)
Ring-type unit connecting ring (for
MSM-412)
377-090-1DD
No.
Description
377-085D
Ring type LED illumination unit
377-090-1DD Ring-type fluorescent illumination unit
Ring-type fluorescent illumination unit
377-090-1E*
(UK only)
Universal mounting support
• For greater convenience when observing large objects that cannot be installed on a standard
support.
• The adjustable arm provides for several observation angles.
• Maximum height of object: approx. 225/205mm (MSM-Z414, MSM-465).
• Optimum weight distribution guarantees excellent stability of the instrument.
No.
Applicable Microscope
377-007D* MSM-412 and MSM-Z414
377-107D*
MSM-465
CCD Camera Adaptor
•
•
•
•
1/2" CCD camera support (camera with load transfer device).
Switching between binocular and video observation modes.
Digital diaphragm opening/closing control.
Under certain observation conditions, visible artifacts may appear in the field of view.
No.
Applicable Microscope
377-094D
MSM-465
490
The prices listed are suggested retail prices (valid until 31st May 2012). Inch products and combined inch/metric products are generally intended
for sale to the United Kingdom only. All products are intended to be sold to commercial customers. Therefore VAT is not included.
* Please contact Mitutoyo for more information on delivery times.
TM-500 Measuring Microscope
Series 176
Specifications
Observation image
Angle reading
Objective lens
Eyepiece
Total magnification
Transmitted
illumination
Surface illumination
Power supply
Mass
Max. stage loading
Erect
Range : 360°
Minimum reading : 6' (by vernier)
2X (176-138)
Working distance : 67 mm
Optional : 5X, 10X
15X (176-116), View field ø13
mm
Optional : 10X, 20X
30X
Light source : Tungsten bulb
(24V, 2W)
Functions : With green filter,
Light intensity adjustable
Light source : Tungsten bulb
(24V, 2W)
Functions : Light intensity
adjustable
220/240V AC, 50/60Hz
TM-505 : 13.5 kg
TM-510 : 14.5 kg
5 kgf
Toolmaker's Microscope
• Suitable for measuring dimensions and angles on small workpieces using optional analogue or
digital micrometer heads and the built-in circular scale
• Compact design makes this microscope ideal for use where space is strictly limited.
• A choice of adjustable-intensity transmitted or incident illumination is provided.
Standard accessories
No.
176-206
176-207
176-116
176-126
176-138
Description
Adjustment range 50 x 50 mm (TM-505)
Adjustment range 100 x 50 mm
(TM-510)
15X projection lens set
Eyepiece reticle cross hairs (standard
accessory)
Objective 2X
Consumable spares
No.
383038D
Description
Halogen bulb (24V, 2W)
TM-505 fitted with optional analogue micrometer heads
Angle reading
TM-510 fitted with optional analogue micrometer heads
The prices listed are suggested retail prices (valid until 31st May 2012). Inch products and combined inch/metric products are generally intended
for sale to the United Kingdom only. All products are intended to be sold to commercial customers. Therefore VAT is not included.
* Please contact Mitutoyo for more information on delivery times.
491
TM-500 Measuring Microscope
Series 176
Dimensions
Model
No.
Remarks
XY stage travel range
(mm)
XY stage table top size
Effective area of table
Max. workpiece height
TM-505
176-811CED
176-811CEE
176-811CEE UK only
TM-510
176-812CED
176-812CEE
176-812CEE UK only
50 x 50 mm
100 x 50 mm
152 x 152 mm
96 x 96 mm
115 mm
240 x 152 mm
154 x 96 mm
107 mm
176-106
172-378
176-107
176-105
172-197
TM-505
TM-510
492
The prices listed are suggested retail prices (valid until 31st May 2012). Inch products and combined inch/metric products are generally intended
for sale to the United Kingdom only. All products are intended to be sold to commercial customers. Therefore VAT is not included.
* Please contact Mitutoyo for more information on delivery times.
TM-500 Measuring Microscope
Optional accessories
No.
152-390
152-389
377-085D
377-090-1DD
176-344CED
176-105
176-106
172-197
172-198
172-196
959149
959150
172-378
12AAE044
176-107
164-163
176-115
176-116
176-117
176-137
176-139
176-203
176-204
176-366CED
611635-031
06ADV380C
02AZD790C
611675-031
990561
Description
Micrometer head for X-axis 50 mm
Micrometer head for Y-axis 50 mm
Ring-type LED illumination unit
Ring-type fluorescent illumination unit
Bifurcated fibre illumination
Swivel centre support
Rotary table 66 mm
Swivel centre support
Rotary table 100 mm with fine
adjustment
Rotary table 100 mm
Signal cable 1 m with data switch
Signal cable 2 m with data switch
V-block with clamp
(Max. workpiece ø25 mm)
Ring-type unit connecting ring (for
TM-500)
Holder with clamp
Digital micrometer head 50 mm
10X eyepiece (view field ø13 mm)
15X projection lens set
20X eyepiece (view field ø10 mm)
Objective 10X (W.D : 14 mm, N.A. : 0.14)
Objective 5X (W.D : 33 mm, N.A. : 0.10)
Twin-bulb reflected illumination unit
Dial indicator attachment for Z-axis
measurement
Fibre-optic ring light
Steel Individual Metric Gauge Block 25
mm Grade 1
Signal cable 2 m USB
Signal cable for U-Wave with data
switch
Steel Individual Metric Gauge Block 50
mm Grade 1
Workpiece clip (2pcs./set)
Series 176
Accessories
Objective lenses and Eyepieces
Eyepiece 10X Eyepiece 15X Eyepiece 20X
No.
Objective lens
(176-115)
(176-116)
(176-117)
176-137
10X
100X (1,3 mm) 150X (1,3 mm) 200X (1 mm)
176-138
20X (6,5 mm) 30X (6,5 mm) 40X (5 mm)
2X (1)
176-139
5X
50X (2,6 mm) 75X (2,6 mm) 100X (2 mm)
Standard accessory
The number in brackets is the diameter of the view field
(1)
176-106 : for stage 50 x 50 mm
172-1796 and 172-198 : for stage 100 x 50 mm
Optional accessories for Inch
No.
377-090-1E
176-344CEE
152-392
152-391
164-164
Description
Ring-type fluorescent illumination unit
UK only
Bifurcated fibre illumination UK only
Micrometer head for Y-axis 2"
Micrometer head for X-axis 2"
Digimatic micrometer head 50 mm/2"
377-090
The prices listed are suggested retail prices (valid until 31st May 2012). Inch products and combined inch/metric products are generally intended
for sale to the United Kingdom only. All products are intended to be sold to commercial customers. Therefore VAT is not included.
* Please contact Mitutoyo for more information on delivery times.
493
Reticles for Measuring Microscope TM-500
Series 176
No.
Designation
176-109
Metric screw threads (pitch = 0,25 - 1 mm)
176-110*
Metric screw threads (pitch = 1,25 - 2 mm)
176-111 Concentric circle (up to ø4 mm, 0,05 mm increment)
176-112
20° involute gear teeth (normal rack type)
176-113*
55° angle
176-114
60° angle
176-120*
Whitworth screw threads (60 - 26TPI)
176-121*
Whitworth screw threads (24 - 18TPI)
176-122
Whitworth screw threads (16 - 11TPI)
176-123
Unified screw threads (80 - 28TPI)
176-124*
Unified screw threads (24 - 14TPI)
176-125
Unified screw threads (13 - 10TPI)
176-126
Cross-hair (standard accessory)
176-127
NF screw threads (80 - 28TPI)
176-128
NF screw threads (24 - 14TPI)
176-129
NF screw threads (13 - 10TPI)
176-130*
14.5° involute gear teeth (normal rack type)
176-135* Concentric circles (up to Ø 0.2", 0.01" increment)
176-140
ISO metric screw threads (0,075 - 0,7 mm)
176-141
ISO metric screw threads (0,75 - 2 mm)
176-142*
ISO unified screw threads (80 - 28TPI)
176-143*
ISO unified screw threads (24 - 14TPI)
176-144*
ISO unified screw threads (13 - 10TPI)
176-109
176-110
176-111
176-112
176-113
176-114
176-120
176-121
176-122
176-123
176-124
176-125
176-126
176-127
176-128
176-129
176-130
176-140
176-141
494
The prices listed are suggested retail prices (valid until 31st May 2012). Inch products and combined inch/metric products are generally intended
for sale to the United Kingdom only. All products are intended to be sold to commercial customers. Therefore VAT is not included.
* Please contact Mitutoyo for more information on delivery times.
MF Measuring Microscope
Series 176
Specifications
Observation
image
Optical tube
Erect image
Eyepiece
Objective lens
10X, 15X, 20X
Standard: 3X
Optional: 1X, 5X, 10X, 20X, 50X, 100X
Light source: Halogen bulb (12V, 50W)
Optical system: Telecentric illumination
with adjustable aperture diaphragm
Functions: Light intensity adjustable,
non-stepped brightness adjustment
Light source: Halogen bulb (12V, 150W)
Optical system: Koehler illumination
with adjustable aperture diaphragm
No. of axes: 2 (MF-A type) or 3 (MF-B
type)
Resolution: 0,001 mm/0,0005 mm/
0,0001 mm/0.0001"/0.00005"/0.00001"
Functions: Zero/Abs, Direction
switching, Data output (via RS-232C
interface)
Light intensity adjustable, non-stepped
brightness adjustment Display unit
100/110/120/220/240 VAC, 50/60Hz
Transmitted
illumination
Surface
illumination
Power supply
Monocular or binocular tube
(depression: 25"), Reticle projection
method, with TV mount, Optical path
ratio (eyepiece/TV mount: 50/50)
The MF measuring microscopes' expandability, such as when used in combination with Mitutoyo's
vision unit to boost its performance or data management on a PC, promises further improved measuring efficiency.
• Observation with a clear and flare-less erect image and a wide field of view.
• Measuring accuracy that is the highest in its class (and conforms to JIS B 7153).
• ML series, high-NA objectives that are specially designed for the MF series (long working distance
type).
• Illumination unit (reflected/transmitted) selectable from a high-intensity LED or halogen bulb.
• Variable aperture diaphragm (reflected/ transmitted) allows observation measurement while suppressing light diffraction.
• Variety of standardised stages in sizes up to 400×200 mm.
• Quick-release mechanism useful for moving the stage quickly when measuring workpieces that are
large in size or quantity.
• Coarse/fine feed handles equipped as standard on both sides allow precise focus and observation
measurement regardless of handedness.
• High-magnification eyepiece observation up to 2000X.
• Standard measuring microscope that has a wide variety of optional accessories including a Vision
Unit and various digital CCD cameras.
Using optional slide type nosepiece
with 2-lens mount
(factory-fit option)
Reticle mounts
(standard accessories)
176-392
Optional monocular
176-664-10
MF-2017C model
176-393
Optional binocular
505C
50x50 mm
1010C
100x100 mm
3017C
300x170 mm
4020C
400x200 mm
The prices listed are suggested retail prices (valid until 31st May 2012). Inch products and combined inch/metric products are generally intended
for sale to the United Kingdom only. All products are intended to be sold to commercial customers. Therefore VAT is not included.
* Please contact Mitutoyo for more information on delivery times.
495
2010B
200x100 mm
MF Measuring Microscope
Series 176
Optional accessories
Specifications/Dimensions
Model
No.
MF-A (2 axis)
MF-B (3 axis)
XY stage travel range
(mm)
Z-axis travel range (mm)
XY stage top size (mm)
Effective glass size (mm)
Swivelling function
Max. stage loading
Max. workpiece height
Mass
0505C
176-661-10*
176-681-10*
176-661-10
176-681-10
1010C
176-662-10
176-682-10*
176-662-10
176-682-10
2010C
176-663-10
176-683-10
176-663-10
176-683-10
2017C
176-664-10
176-684-10*
176-664-10
176-684-10
3017C
176-665-10*
176-685-10
176-665-10
176-685-10
4020C
176-666-10*
176-686-10*
176-666-10
176-686-10
50 x 50
100 x 100
200 x 100
200 x 170
300 x 170
400 x 200
150
280 x 280
180 x 180
10 kg
150 mm
65.5 kg
150
280 x 280
180 x 180
10 kg
150 mm
65.5 kg
150
350 x 280
250 x 150
10 kg
150 mm
69.5 kg
220
410 x 342
270 x 240
±5° (left)
20 kg
220 mm
130 kg
220
510 x 342
370 x 240
±5° (left)
20 kg
220 mm
138 kg
220
610 x 342
440 x 240
±3° (left)
15 kg
220 mm
144 kg
mm
90.5
261
327
249
78
360
234+50
413
200
667
79
330
114
551
726.3+50
300+50
mm
90.5
327
249
375-056
Eyepieces
176-313D
176-313E
176-392
176-393
375-043
378-856-5
378-857-5
378-858-5
Filters
12AAA643
12AAA644
12AAA645
12AAA646
Mounts
176-314-1
176-314-2
120.3
1010C
261
No.
12AAA165
12AAA846
12BAB345
176-308
264-145D
264-145E
375-054
78
Digital protractor eyepiece (10X)
Digital protractor eyepiece (10X) UK
only
Monocular tube with 10X eyepiece
Binocular tube with 10X eyepiece set
Protractor eyepiece (10X)
10X eyepiece set (ø24 mm)
15X eyepiece set
20X eyepiece set (ø12 mm)
ND2 colour filter
ND8 colour filter
GIF filter (transmitted / surface)
LB80 colour filter (transmitted / surface)
Slide type nosepiece (2-mount /
parfocal) factory-fit option
Slide type nosepiece (2-mount / mag.
adjusted) factory-fit option
C-mount adapter
5X objective (WD : 61 mm, NA : 0.13)
1X objective (WD : 61 mm, NA : 0.03)
3X objective (WD : 77 mm, NA : 0.09)
10x objective / CF
20X objective (WD : 20 mm, NA : 0.42)
50X objective (WD : 13 mm, NA : 0.55)
100X objective (WD : 6 mm, NA : 0.7)
247.5
457.5
782
79
330
970441
Objectives
375-034-1
375-036-2
375-037-1
375-039
375-051
375-052
375-053
Description
Lens cleaning set
Foot switch
Halogen bulb (24V/50W)
Vibration damping stand
Tabletop type QM-Data 200
Tabletop type QM-Data 200 UK only
0.5X camera adapter (with C-mount
adapter)
Stage micrometer
114
360
305 +200
621
903.3 +100
452 +200
120.3
4020C
Vision Unit
PC-based vision measuring system
Focus pilot FP-05
Focus assisting system
QM-Data 200
496
The prices listed are suggested retail prices (valid until 31st May 2012). Inch products and combined inch/metric products are generally intended
for sale to the United Kingdom only. All products are intended to be sold to commercial customers. Therefore VAT is not included.
* Please contact Mitutoyo for more information on delivery times.
MF Measuring Microscope
Optional accessories
No.
172-197
172-198
176-305
176-306
172-378
12AAG806
12AAG807
176-107
12AAA807D
Eyepieces
378-856
378-856-5
Lighting
176-343D
176-345D
176-345E
176-347D
176-347E
176-351-6
176-366CED
176-367-2D
176-367-2E
Reticles
12AAG838
12AAG846
12AAG847
12AAG848
12AAG849
12AAG850
12AAG851
12AAG852
12AAG853
12AAG836
12AAG873
12AAG840
12AAG841
12AAG842
12AAG843
12AAG844
12AAG845
12AAG839
12AAG854
Description
Swivel centre support
Rotary table 100 mm with fine
adjustment
Rotary table with fine feed wheel ø183
mm
Rotary table with fine feed wheel ø240
mm
V-block with clamp
(Max. workpiece ø25 mm)
GIF filter
LB80 filter
Holder with clamp
Cable RS-232C D-SUB 9/D-SUB 9 (2m)
Series 176
Accessories/Diagram system
10X eyepiece (two)
10X eyepiece set (ø24 mm)
Twin fibre-optic illuminator
LED illumination unit
LED illumination unit UK only
Halogen illumination unit
Halogen illumination unit UK only
Oblique surface illumination unit
Fibre-optic ring light
LED ring illuminator
LED ring illuminator UK only
Cross-hair reticle (7 µm width)
Reticle 10x10 mm section
Reticle metric screw thread (P=0,25-1,0)
Reticle metric screw thread (P=1,25-2,0)
Reticle involute gear tooth (14.5°)
Reticle involute gear tooth (20°),
module =0.1-1.0
Reticle unified screw thread (80-28TPI)
Reticle unified screw thread (24-14TPI)
Reticle unified screw thread (13-10TPI)
Cross-hair reticle (5 µm width)
Cross-hair reticle (3 µm width)
Broken cross-hair reticle and 60° angle
Zeiss type chart reticle
Reticle 20 mm scale
Reticle concentric circle (ø1,2 - ø18 mm)
Reticle 10 mm scale
Reticle 5 mm scale
Broken cross-hair and 45° angle
Concentric circle (Ø0.01" - Ø0.2")
The prices listed are suggested retail prices (valid until 31st May 2012). Inch products and combined inch/metric products are generally intended
for sale to the United Kingdom only. All products are intended to be sold to commercial customers. Therefore VAT is not included.
* Please contact Mitutoyo for more information on delivery times.
497
MF-U Measuring Microscope
Series 176
Specifications
High-power Multi-function
• A measuring microscope that provides detailed observation with a clear and flare-less erect image
and a wide field of view.
• Measuring accuracy that is the highest in its class (and conforms to JIS B 7153).
• Proven high-NA objectives from the FS optical system (long working distance type).
• Integration of metallurgical and measurement microscope functions provides high-resolution observation and high-accuracy measurement.
• Illumination unit (reflected/transmitted) optional from a high-intensity LED or halogen bulb (required).
• Variable aperture diaphragm (reflected/ transmitted) allows observation measurement while suppressing light diffraction.
• Variety of standardized stages in sizes up to 400 × 200 mm.
• Quick-release mechanism useful for moving the stage quickly when measuring workpieces that
are large in size or quantity.
• High-magnification eyepiece observation up to 4000X.
• Low-noise design.
MF-UB 3017C
(turret, objectives and illumination are optional)
Observation
Erect image
image
Measuring
XY-axis : (2,2+0,02L) µm
accuracy (at 20°C) L : Measuring length (mm) when not
loaded, JIS B7153
Indication
Z-axis : (5+0,04L) µm
accuracy (at 20°C) L : Measuring length (mm)
Floating function X and Y axes with Quick-release
mechanism
Focusing method Manual (coarse focusing : 10 mm/
rev.,
fine focusing : 0,1 mm/rev.)
Optical tube
Siedentoph type (pupil distance
adjustment : 51 - 76 mm), 1X tube
lens, Binocular tube (depression :
30˚), Reticle projection method, with
TV mount, Optical path ratio
(eyepiece/TV mount : 50/50)
Eyepiece lens
10X (field No.: 24mm)
Optional : 15X, 20X
Turret (optional) Manual or power
Objective lens
M / BD Plan Apo objective from 1X
(optional)
to 100X
Transmitted
Light source : Halogen bulb (12V,
illumination
50W)
optional
Optical system : Telecentric
illumination with adjustable
aperture diaphragms
Functions : Light intensity
adjustable, Non-stepped brightness
adjustment
Surface
Light source : Optional halogen
illumination
illumination unit (fiber-optic cold
optional
light illumination)
Optical system : Koehler
illumination with adjustable
aperture diaphragms
Functions : Light intensity
adjustable, Non-stepped brightness
adjustment
Display unit
0.001mm / 0.0005mm / 0.0001mm /
resolution
0.0001" / 0.00005" / 0.00001"
No. of axis : 2 axes or 3 axes
Functions : Zero-setting, Direction
switching, Data output (via RS-232C
interface)
Power supply
220/240V AC, 50/60Hz
mm
261
90.5
356
231
125
Differential interference
contrast
Dark field
Bright field
199.5
562
667
171
330
Polarized light
360
114
234+50
551
300+50
120.3
726.3+50
498
The prices listed are suggested retail prices (valid until 31st May 2012). Inch products and combined inch/metric products are generally intended
for sale to the United Kingdom only. All products are intended to be sold to commercial customers. Therefore VAT is not included.
* Please contact Mitutoyo for more information on delivery times.
MF-U Measuring Microscope
Optional accessories
No.
176-305
176-306
172-378
12AAA165
12AAA846
375-054
375-056
970441
Bulbs
12BAB345
12BAD602
517181
Eyepieces
378-857
378-858
Filters
12AAA643
12AAA644
12AAA645
12AAA646
12AAG806
12AAG807
Lighting
176-315D
176-315E
176-316D
176-316E
176-343D
176-346D
176-346E
176-348D
176-348E
Reticles
12AAG876
12AAG877
12AAG878
12AAG879
12AAG880
12AAG881
Stands
172-197
176-107
176-308
Turrets
176-211
378-018
378-116D
378-210
Description
Rotary table with fine feed wheel ø183
mm
Rotary table with fine feed wheel ø240
mm
V-block with clamp
(Max. workpiece ø25 mm)
Lens cleaning set
Foot switch
0.5X camera adapter (with C-mount
adapter)
Stage micrometer
C-mount adapter
378-078
378-079
378-080
Model 505C
XY stage travel range : 50 x 50 mm
Z-axis travel range : 150 mm
XY stage top size : 280 x 280 mm
Effective glass size : 180 x 180 mm
Max. stage loading : 10 kgf
Max. workpiece height : 150 mm
Mass : 65.5 kg
Model
MF-UA
No.
176-667-10*
Bright Field
Observation type
(BF)
X and Y axis
Measurement system
(2 axes)
Model 505C
MF-UC
MF-UB
MF-UD
176-673-10* 176-687-10* 176-693-10*
Bright/Dark Bright Field Bright/Dark
Field (BF/DF)
(BF)
Field (BF/DF)
X and Y axis X, Y and Z- X, Y and Z(2 axes)
axis (3 axes) axis (3 axes)
Halogen bulb (24V/50W)
High intensity bulb (24V/100W)
Halogen bulb (24V, 100W)
15X eyepiece
20X eyepiece
ND2 colour filter
ND8 colour filter
GIF filter (transmitted / surface)
LB80 colour filter (transmitted / surface)
GIF filter
LB80 filter
Halogen illumination unit (12V, 100W)
Halogen illumination unit (12V, 100W)
UK only
Halogen illumination unit (12V, 150W)
Halogen illumination unit (12V, 150W)
UK only
Twin fibre-optic illuminator
LED illumination unit
LED illumination unit UK only
Halogen illumination unit
Halogen illumination unit UK only
Cross-hair reticle (3 µm width)
Cross-hair reticle (5 µm width)
Cross-hair reticle (7 µm width)
Cross-hair and 45° angle
Broken cross-hair and 60° angle
Zeiss type chart
Swivel centre support
Holder with clamp
Vibration damping stand
Model 1010C
XY stage travel range : 100 x 100 mm
Z-axis travel range : 150 mm
XY stage top size : 280 x 280 mm
Effective glass size : 180 x 180 mm
Max. stage loading : 10 kgf
Max. workpiece height : 150 mm
Mass : 65.5 kg
Model
MF-UA
MF-UC
MF-UB
MF-UD
No.
176-668-10 176-674-10* 176-688-10* 176-694-10
Bright/Dark
Bright Field Bright/Dark Bright Field
Observation type
Field (BF/
(BF)
Field (BF/DF)
(BF)
DF)
X and axis X and Y axis
X, Y and Z
X, Y and Z
Measurement system
(2 axes)
(2 axes)
axis (3 axes) axis (3 axes)
Model 2010C
XY stage travel range : 200 x 100 mm
Z-axis travel range : 150 mm
XY stage top size : 350 x 280 mm
Effective glass size : 250 x 150 mm
Max. stage loading : 10 kgf
Max. workpiece height : 150 mm
Mass : 69.5 kg
Model
MF-UA
MF-UC
MF-UB
MF-UD
No.
176-669-10* 176-675-10* 176-689-10* 176-695-10
Bright/
Bright Field Bright/Dark Bright Field
Observation type
Dark Field
(BF)
Field (BF/DF)
(BF)
(BF/DF)
X and Y axis X and Y axis X, Y and Z
X, Y and Z
Measurement system
(2 axes)
(2 axes)
axis (3 axes) axis (3 axes)
Manual turret BF/DF 4 mount
Manual turret BF
Power turret BF 5 mounts
Power turret BF/DF
Optional accessories
No.
DIC Units
378-076
Series 176 - High-power Multi-function
Series 176
Description
DIC unit for 100X, SL80X, SL50X
objective
DIC unit for 50X, SL20X objective
DIC unit for 20X objective
DIC unit for 10X, 5X objective
Model 2017C
XY stage travel range : 200 x 170 mm
Z-axis travel range : 220 mm
XY stage top size : 410 x 342 mm
Effective glass size : 270 x 240 mm
Swivelling function (left) : ±5°
Max. stage loading : 20 kgf
Max. workpiece height : 220 mm
Mass : 130 kg
The prices listed are suggested retail prices (valid until 31st May 2012). Inch products and combined inch/metric products are generally intended
for sale to the United Kingdom only. All products are intended to be sold to commercial customers. Therefore VAT is not included.
* Please contact Mitutoyo for more information on delivery times.
499
Model 1010C
Model 2010C
MF-U Measuring Microscope
Model
No.
MF-UA
176-670-10*
Observation type
Bright Field (BF)
Measurement system
X and Y axis (2 axes)
MF-UC
176-676-10*
Bright/Dark Field (BF/
DF)
X and Y axis (2 axes)
MF-UB
176-690-10*
Bright Field (BF)
X, Y and Z axis (3
axes)
MF-UD
176-696-10*
Bright/Dark Field (BF/
DF)
X, Y and Z axis (3 axes)
Model 2017C
Model 3017C
XY stage travel range : 300 x 170 mm
Z-axis travel range : 220 mm
XY stage top size : 510 x 342 mm
Effective glass size : 370 x 240 mm
Swivelling function (left) : ±5°
Max. stage loading : 20 kgf
Max. workpiece height : 220 mm
Mass : 138 kg
Model
MF-UA
No.
176-671-10*
Observation type
Bright Field (BF)
Measurement system
X and Y axis (2 axes)
Model 4020C
XY stage travel range : 400 x 200 mm
Z-axis travel range : 220 mm
XY stage top size : 610 x 342 mm
Effective glass size : 440 x 240 mm
Swivelling function (left) : ±3°
Max. stage loading : 15 kgf
Max. workpiece height : 220 mm
Mass : 144 kg
Model
MF-UA
No.
176-672-10*
Observation type
Bright Field (BF)
Measurement system
X and Y axis (2 axes)
MF-UC
176-677-10*
Bright/Dark Field (BF/
DF)
X and Y axis (2axes)
MF-UB
176-691-10*
Bright Field (BF)
X, Y and Z axis (3 axes)
MF-UD
176-697-10*
Bright/Dark Field (BF/
DF)
X, Y and Z axis (3 axes)
Model 3017C
MF-UC
176-678-10*
Bright/Dark Field (BF/
DF)
X and Y axis (2 axes)
MF-UB
176-692-10*
Bright Field (BF)
X, Y and Z axis (3
axes)
MF-UD
176-698-10*
Bright/Dark Field (BF/
DF)
X, Y and Z axis (3 axes)
Model 4020C
500
The prices listed are suggested retail prices (valid until 31st May 2012). Inch products and combined inch/metric products are generally intended
for sale to the United Kingdom only. All products are intended to be sold to commercial customers. Therefore VAT is not included.
* Please contact Mitutoyo for more information on delivery times.
Accessories for Measuring Microscope
Series 176 - 378 - 375
Focus Pilot FP-05 /FP-05U
• By installing this system on the camera mount of an MF series measuring microscope and projecting the focusing chart onto the workpiece surface, the focal point can be detected with high
accuracy and high repeatability.
• The brightness of the image can be adjusted.
• A wide view field observation on the monitor is made possible with the use of a CCD camera (Cmount adapter is included).
• Four chart patterns are available. The pattern should be selected that works best with the type
of workpiece surface texture.
Focus Pilot is factory set option
Concentric circle
Manual and Power Turrets
Stage Micrometer
Slit
Focus Pilot
Magnification : 0.5X, Accuracy : 0.1% (within 2/3 area from the centre of view field)
Camera adapter : C-mount (provided)
Applicable CCD camera : Up to 2/3-inch
Mass : 1.8 kg
No.
Applicable microscopes Light source Remarks
375-057D*
MF-C
Green LED
375-057E*
MF-C
Green LED UK only
375-058D*
MF-C
Red LED
375-058E*
MF-C
Red LED
UK only
375-067D*
MF-U C
Green LED
375-067E*
MF-U C
Green LED UK only
375-068D*
MF-U C
Red LED
375-068E*
MF-U C
Red LED
UK only
Power Turrets
Power supply : 240V AC, 50/60 Hz
Dimensions : Turret : 164 x 65 x 137 mm
Control Box : 108 x 72 x 193 mm
No.
Applicable microscopes Observation type No. of objective mounts
176-210D
MF-UC
Bright Dark Field
4
176-210E*
MF-UC
Bright Dark Field
4
378-016D
MF-UC
Bright Field
4
378-016E*
MF-UC
Bright Field
4
378-116D
MF-UC
Bright Field
5
378-116E*
MF-UC
Bright Field
5
Manual Turrets
No.
Applicable microscopes Observation type No. of objective mounts
176-211
MF-UC
Bright Dark Field
4
378-018
MF-UC
Bright Field
4
Stage Micrometer
No.
Range Graduations
375-056* 1 mm
0,01 mm
Accuracy (at 20°C)
Dimensions Mass
(1+L) µm
76 x 26 mm 16 g
L : Measuring length (mm)
The prices listed are suggested retail prices (valid until 31st May 2012). Inch products and combined inch/metric products are generally intended
for sale to the United Kingdom only. All products are intended to be sold to commercial customers. Therefore VAT is not included.
* Please contact Mitutoyo for more information on delivery times.
501
Remarks
UK only
UK only
UK only
Accessories for Measuring Microscope
Series 176
LED Ring Light
LED Ring Light
(for FS Objective lenses)
Dual Swan-neck Light-pipe
Dual Swan-neck Light-pipe
LED Ring Light (for FS Objective lenses)
No.
Applicable microscopes
Light source
176 Led Ring Light MF-UC models with 1X, 3X, 5X objective lens Supplied from microscope (surface illumination)
Dual Swan-neck Light-pipe illuminator
Applicable microscopes : MF, MF-U models
Length of fibre cable : 700 mm
Light source : Halogen bulb (12V, 100W) (517181 : halogen bulb)
Dimensions : Light unit 235 x 76 x 120 mm
No.
Remarks
176-343D*
176-343E* UK only
Fibre-optic Ring Light
Applicable microscopes : MF models
Length of fibre cable : 1000 mm
Light source : Halogen bulb (12V, 100W) (517181 : halogen bulb)
Dimensions : Light unit 235 x 76 x 120 mm
No.
Remarks
176-366CED*
-
Fibre-optic Ring Light
LED Ring Illuminator
LED Ring Illuminator
Applicable microscopes : MF models with 1X, 3X, 5X, 10X objective
Light source : White LED
Length of LED cable : 1500 mm
No.
Remarks
176-367-2D
176-367-2E* UK only
Fibre-optic Ring Light
LED Ring Illuminator
502
The prices listed are suggested retail prices (valid until 31st May 2012). Inch products and combined inch/metric products are generally intended
for sale to the United Kingdom only. All products are intended to be sold to commercial customers. Therefore VAT is not included.
* Please contact Mitutoyo for more information on delivery times.
Accessories for Measuring Microscope
Accessories for Measuring Microscope
Illumination
(A) : Vertical surface illumination (Halogen)
(B) : Fibre-optic Ring illumination
(C) : LED Ring illumination
(D) : Dual Swan-neck Light Pipe illumination
PCB
HDD suspension
IC structure
Flexible PCB
PCB
Electrical parts
(A)
(B)
(C)
(D)
HDD suspension
IC package
PCB
Garnet
The prices listed are suggested retail prices (valid until 31st May 2012). Inch products and combined inch/metric products are generally intended
for sale to the United Kingdom only. All products are intended to be sold to commercial customers. Therefore VAT is not included.
* Please contact Mitutoyo for more information on delivery times.
Black plastic molded parts
PCB
503
Vision Unit
Series 359
Specifications
Vision System Retrofit for Microscopes
• Automatic edge-detection tools and various macro icons allow measurement in one easy step.
• Graphics and measurement navigation functions facilitate operation.
• Image data input/storage function.
• Measurement results are output to MSExcel ®. This lets the user generate an inspection table on
the same computer.
• Allows the tolerance zone measurement of measurement results and various types of statistical
processing for each item.
• Combined use with the focus pilot provides high-accuracy in height measurements. (Patent
pending)
• A series of measuring operations can be performed using just one screen display.
• The auto-brightness control function faithfully reproduces the type and degree of illumination
used. (This function is limited to the MF/MF-U series.)
Projected
image
Camera unit
Inverted
Image sensor : 1/2" color CMOS camera
Resolution : 0,0001 mm
Dimensions : 100 x 58 x 89 mm (W x D x
H)
Mass : 0,4 kg
Adapter unit Operating software : QSPAK VUE
(optional)
Dimensions : 45 x 123 mm
Magnification : 0.5X
Mass : 0,3 kg
Magnification 21X - 210X on 19" monitor
__________
_________________________________
QSPAK VUE, For observation/comparison of form
optional
- Template matching function
software
- Manual pattern matching function
For simple measurement
- One-click edge detection tool function
- Smart tool function
- User macro function
Functions for repeated
measurement/auto-measurement
- Quick navigation
- Playback
- Graphic
- External data output
- Statistical calculation
Standard accessories
No.
12AAJ088
Description
Footswitch
The PC system, QSPAK VUE software and microscope are optional.
No.
Description
359-797* For MF C
359-799* For MF-UC
One-click Edge Detection
Just by clicking the mouse near the edge of a
workpiece, QSPAK automatically scans the edge and
detects it, showing its coordinates. This function
also works with the point tool, box tool, circle tool
and auto-focus tool.
QSPAK VUE Measurement Window
Graphic Window
The measurement results and measured elements
are plotted in the graphic window in real-time. By
using this function the user can check the current
measuring position at a glance. The graphic window
can be used for geometrical calculations.
504
The prices listed are suggested retail prices (valid until 31st May 2012). Inch products and combined inch/metric products are generally intended
for sale to the United Kingdom only. All products are intended to be sold to commercial customers. Therefore VAT is not included.
* Please contact Mitutoyo for more information on delivery times.
Hyper MF/MF-U Measuring Microscope
Series 176
Specifications
Observation
image
Optical tube
Erect
Eyepiece
Hyper MF : Optional 10X, 15X, 20X
Objective : 3X (375-037-1), W.D. : 77
mm
Optional : 1X, 5X, 10X, 20X, 50X, 100X
Hyper MF-U : 10X (field No. : 24 mm),
Optional : 15X, 20X
Turret
(optional)
Hyper MF-U : Power
Objective (optional) : M / BD Plan Apo
objective from 1X to 100X
Transmitted
illumination
Light source : Halogen bulb (12V,
100W)
Hyper MF : (fiber-optic cold light
illumination)
Optical system : Telecentric
illumination with adjustable aperture
diaphragms
Functions : Light intensity adjustable,
100 steps brightness adjustment
Surface
illumination
Light source : Halogen bulb (12V,
50W)
Optical system : Koehler illumination
with adjustable aperture diaphragms
Functions : Light intensity adjustable,
100 steps brightness adjustment
Data output
Power supply
Via RS-232C interface
Optional
Accessories
Reticle projection method, with TV
mount, Optical path ratio (eyepiece/
TV mount : 50/50)
Hyper MF : Monocular or binocular
tube (optional depression : 25°)
Hyper MF-U : Siedentoph type (pupil
distance adjustment : 51 - 76 mm), 1X
tube lens, Binocular tube (depression :
25°)
• The world highest XY measuring accuracy of (0,9+3L/1000) µm.
L = measured length in XY plane, stage unloaded.
• Selectable LAF (Laser Auto Focus) function.
• High operability and repeatability.
• Three-axis motorized control.
• Power-drive auto focus unit is a standard feature.
• Easy positioning via joystick control.
220/240V AC, 50/60 Hz
See MF accessories for Hyper MF
models
See MF-U accessories for Hyper MF-U
models
Hyper MF-U
with optional turret and objective lenses
Control panel for fast traverse and three-axis
positioning
XY stage travel range : 250 x 150 mm
Measuring unit : Linear encoder
Resolution : 0,01 µm
XY stage top size : 300 x 200 mm
Swiveling function : ±3°
Max. stage loading : 30 kgf
Max. workpiece height : 150 mm
Hyper MFModel
B2515B
176-430D*
No.
176-430E*
Observation type
Bright Field
Bright Field
Laser auto focus function
176-430E UK
only
176-431E UK
only
Remarks
The prices listed are suggested retail prices (valid until 31st May 2012). Inch products and combined inch/metric products are generally intended
for sale to the United Kingdom only. All products are intended to be sold to commercial customers. Therefore VAT is not included.
* Please contact Mitutoyo for more information on delivery times.
Hyper MFUB2515B
176-431D*
176-431E*
505
Hyper MFUD2515B
176-432D*
176-432E*
Bright Field or
Bright Field/Dark
Field
176-432E UK only
Hyper MFUE2515B
176-433D*
176-433E*
Bright Field
Available
176-433E UK
only
Hyper MFUF2515B
176-434D*
176-434E*
Bright Field or
Bright Field/Dark
Field
Available
176-434E UK only
Hyper MF/MF-U Measuring Microscope
Series 176
Specifications
mm
Optional
Accessories
See MF accessories for Hyper MF
models
See MF-U accessories for Hyper MF-U
models
Optional accessories
730
No.
264-149D
470
264-149E
262
359-777S
Description
Data processing unit QM-Data 200 for
Hyper MF/MFU
Data processing unit QM-Data 200 for
Hyper MF/MFU UK only
Vision Unit 7C for Hyper MF/MF-U
880
913
Hyper MF-B2515B
Laser Auto Focus Optical Tube
676
QM-Data 200
2-D data processing unit
262
770
mm
880
913
Hyper MF-UB2515B
Vision Unit
PC-based vision measuring system
506
The prices listed are suggested retail prices (valid until 31st May 2012). Inch products and combined inch/metric products are generally intended
for sale to the United Kingdom only. All products are intended to be sold to commercial customers. Therefore VAT is not included.
* Please contact Mitutoyo for more information on delivery times.
FS-300 Inspection Microscope
Specifications
Main unit
Reflected illumination : Köehler
illumination with aperture diaphragm
(centering mechanism) and field stop
12V/100W halogen lamp (continuously
variable brightness adjustment) with
filter mounting (2-slot), with BF/DF
switching slide (378-321, 378-323,
378-325, 378-327 only)
Transmitted illumination : 12V/100W
fibre-optic illumination (continuously
variable brightness, adjustment) with
aperture diaphragm (378-323, 378-324,
378-326, 378-327 only)
Power turret Inward type with 4 lens mounts
Workstage
Travel stroke : 356 x 306 mm with X/Y
axis fine feed knobs, and coarse travel
handle
Optical tube Type : Trinocular Siedentopf (erect
image)
Field number : 24
Intermediate image mag. : 1
Optical pass ratio and Pupil distance :
50/50, adjustment range : 51 - 76 mm
Dimensions Main unit : 360 x 803 x 568,5 mm
Workstage : 700 x 400 mm
Power supply 100/240V AC, 50/60Hz
Mass
Approx. 50 kg including workstage
Series 378
High Power Inspection Microscope
The FS-300 is designed for inspecting microcomponents such as IC chips and video head parts. The
optical system features ultra-long working distance objectives, widefield eyepieces, and independent correction for lateral chromatic aberration.
FEATURES
• A complete FS-300 system can be composed of a variety of components for meeting diverse applications.
• Available with or without a transmitted light illuminator.
• Ultra-long working distance objectives provide easy manipulation of workpieces.
• Easy switching between bright-field illumination and dark-field illumination.
• Optional accessories widen the range of applications.
Polarized light observation : Observing only the
filtered light that vibrates in one direction. Used for
observing materials with special optical
characteristics, such as mineral and liquid crystal.
FS-300 with optional accessories
Differential interference observation : Effective in
detecting fine scratches and steps on the surface of
metal, liquid crystal, and semiconductors.
Main unit
observation system
Optical tube depression
angle
378-320D*
Bright field
Fixed 20°
10X/ø30
378-321D*
Bright/Dark field
Fixed 20°
10X/ø30
378-322D*
Bright field
Fixed 20°
10X/ø30
378-323D*
Bright/Dark field
Fixed 20°
10X/ø30
378-324D*
Bright field
Adjustable 0° to 20°
10X/ø24
378-325D*
Bright/Dark field
Adjustable 0° to 20°
10X/ø24
378-326D*
Bright field
Adjustable 0° to 20°
10X/ø24
378-327D*
Bright/Dark field
Adjustable 0° to 20°
10X/ø24
No.
Dark field observation : Observing only the
scattered light by shutting down the direct light to
the objectives. The scratches and dust that cannot
be viewed in the bright view field can be observed
by this method in high-contrast.
Bright field observation : Most common method of
observation. Observing directly the light reflected
from the surface of the workpiece.
The prices listed are suggested retail prices (valid until 31st May 2012). Inch products and combined inch/metric products are generally intended
for sale to the United Kingdom only. All products are intended to be sold to commercial customers. Therefore VAT is not included.
* Please contact Mitutoyo for more information on delivery times.
507
Eyepiece
Applicable objective (optional)
Field of view
M Plan Apo, M Plan Apo SL,
G Plan Apo
BD Plan Apo, BD Plan Apo SL
M Plan Apo, M Plan Apo SL,
G Plan Apo
BD Plan Apo, BD Plan Apo SL
M Plan Apo, M Plan Apo SL,
G Plan Apo
BD Plan Apo, BD Plan Apo SL
M Plan Apo, M Plan Apo SL,
G Plan Apo
BD Plan Apo, BD Plan Apo SL
Power consumption
(approx.)
150W
150W
300W
300W
150W
150W
300W
300W
FS70 Microscope Unit
Series 378 - Microscope Unit for Semiconductor Inspection
Specifications
The optical system originally developed for the best-selling FS60 models was further enhanced for
the FS70 models. It is ideal as the microscope unit of a prober station for semiconductors. (All models CE marked.)
Focus
adjustment
Trinocular
tube Image
Interpupillary
distance
Field number
Tilt angle
Illumination
system
Light source
FS70Z
Model
No.
Model short base
Order No.
short base model
Optical pass ratio
Tube lens
Camera mount
Loading (*¹)
Mass
(main unit)
FS70L4
FS70L
FS70
378-184-1
FS70-S
FS70-TH
378-184-3*
FS70-THS
FS70Z
378-185-1*
FS70Z-S
FS70Z-TH
378-185-3*
FS70Z-THS
378-184-2
378-184-4
378-185-2
378-185-4
50/50
1X
C-mount (using
optional adapter B)
14.5 kg
100/0 or 0/100
1X
C-mount (using
optional adapter B)
13.6 kg
50/50
1X, 2X zoom
C-mount (using
optional adapter B)
14.1 kg
100/0 or 0/100
1X, 2X zoom
C-mount (using
optional adapter B)
13.2 kg
6.1 kg
7.1 kg
6.6 kg
7.5 kg
(*¹) Loading on optical tube excluding weight of objective lenses and eyepieces.
Model
No.
Model short base
Order No.
short base model
Optical pass ratio
Protective filter
Tube lens
Applicable laser
Camera mount
Objective, optional
(for laser-cutting)
Loading (*¹)
Mass
(main unit)
FS70L
378-186-1*
FS70L-S
FS70L-TH
378-186-3*
FS70L-THS
FS70L4
378-187-1*
FS70L4-S
FS70L4-TH
378-187-3*
FS70L4-THS
378-186-2
378-186-4
378-187-2
378-187-4
100/0 or 0/100
Built-in laser beam
filter
1X
1064/532//355 nm
100/0 or 0/100
Built-in laser beam
filter
1X
1064/532/355 nm
Use a laser with TV
port.
Use a laser with TV
port.
100/0 or 0/100
Built-in laser beam
filter
1X
532/266 nm
C-mount receptacle
(with green filter
switch)
100/0 or 0/100
Built-in laser beam
filter
1X
532/266 nm
C-mount receptacle
(with green filter
switch)
M/LCD Plan NIR M/LCD
Plan NUV
14.2 kg
M/LCD Plan NIR M/LCD
Plan NUV
13.5 kg
M Plan UV
M Plan UV
13.9 kg
13.1 kg
6.4 kg
7.2 kg
6.7 kg
7.5 kg
Method : With concentric coarse and
fine focusing wheels (right and left)
Range : 50 mm travel range, 0,1 mm/
rev. for fine adjustment, 3,8 mm/rev.
for coarse adjustment
Erect image
Siedentopf type, adjustment range :
51-76mm
24
0°- 20° (only - TH, - THS models)
Reflective illumination for bright field
( Koehler illumination, with aperture
diaphragm)
12 V / 100 W fibre-optic, non-stopped
adjustment, light guide length 1.5m,
power consumption 150W
M Plan Apo, M Plan Apo SL, G Plan Apo
Objectives
lens (optional)
_____________ _______________________________
FS-70
• The FS70L supports three YAG laser
wavelengths (1064 nm, 532 nm and
355 nm), while the FS70L4 supports
two wavelengths (532 nm and 266 nm),
thus expanding the scope of laser
applications, allowing laser-cutting of
thin-films used in semiconductors and
liquid crystal substrates.
However, Mitutoyo assumes no
responsibility whatever for the
performance and/or safety of the laser
system used with Mitutoyo
microscopes. A careful examination is
recommended when selecting a laseremission unit.
• Bright field, Differential Interference
Contrast (DIC) and polarized
observations are standard with the
FS70Z. The FS70L and FS70L4 do not
support the DIC method.
• By employing an inward-leaning
turret, the long working distance
objectives provide excellent operability.
(*¹) Loading on optical tube excluding weight of objective lenses and eyepieces.
508
The prices listed are suggested retail prices (valid until 31st May 2012). Inch products and combined inch/metric products are generally intended
for sale to the United Kingdom only. All products are intended to be sold to commercial customers. Therefore VAT is not included.
* Please contact Mitutoyo for more information on delivery times.
VM-ZOOM40 Assembly Type Microscope Unit
Series 378
Specifications
Total
magnification
Magnification
tube
Objective lens
Field of view
Reflected
illumination
Light source
Power supply
Mass g
_____________
VM-ZOOM40
100X - 4,000X (when using
1/2-inch CCD camera and 14-inch
monitor)
0.25X - 10X
(Zoom ratio 1:40)
M Plan Apo HR 10X
• 1/2 inch CCD camera (optional) :
2,56 x 1,92mm - 0,064 x 0,048mm
• Binocular : ø 3,2mm - ø 0,08mm
• Koehler system (with aperture
stop)
• Fibre-optic illuminator (378-088)
is required for the manual zoom type.
Halogen bulb (21V, 150W)
20 Lux (min.) on the screen
Main unit : Approx. 7kg
Binocular unit : 1kg
Remote controller unit : Approx. 7kg
___________________________________
Features
- High-ratio 40X zoom with excellent
operability.
- High-resolution objective (10X)
supplied as standard.
- Various optional bright-field
objectives attachable.
- The slide type lens mount allows
quick change between the monitoring
and laser-beam cutting objectives.
- Various wavelength (near infrared,
visible, near ultraviolet, ultraviolet)
lasers supported.
- C-mount attached as standard.
- Manual or power type systems are
selectable according to the purpose.
The VM-ZOOM40 has dramatically improved operability and the quality of visual images by combining the main unit, which has a high-magnification zooming system, with a newly developed
high resolution, long working distance objective. If the VM-ZOOM40 is used with an analysis prober and various other laser repair equipment, it will greatly aid in development, manufacturing,
and inspection of semiconductors and LCD panels.
Selection Guide to System Configuration
(Depends on each system configuration)
Manual
Power
Single obNo.
zoom
zoom
jective
fonction
function
mount
378-171D*
Yes
Yes
378-172D*
Yes
378-173D*
Yes
378-174D*
Yes
378-175D*
Yes
Yes
378-176D*
Yes
378-177D*
Yes
378-178D*
Yes
378-181D*
Yes
378-182D*
Yes
Double-single mount
Binocular unit
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Remarks :
- Power-zoom function : Fiber-optic illumination controller is also provided
- Double-objective mount : The objective can be switched via sliding mechanism
- Binocular unit : 10X eyepieces (378-856) are provided
- For UK, change suffix D to E, example 378-171E
The prices listed are suggested retail prices (valid until 31st May 2012). Inch products and combined inch/metric products are generally intended
for sale to the United Kingdom only. All products are intended to be sold to commercial customers. Therefore VAT is not included.
* Please contact Mitutoyo for more information on delivery times.
509
Yes
YAG laser
(1064/532/355nm)
mount
YAG laser
(532/266nm)
mount
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
VMU Video Microscope Unit
Series 378
Specifications
The VMU is a compact, lightweight, and easy-to-install microscope unit for CCD camera monitoring in semiconductor fabrication facilities.
• The optical system features ultralong working distance objectives and correction for the wide
range of radiation wavelengths in use.
• Fibre-optic reflected illumination keeps the workpiece free from thermal expansion. The fibreoptic illuminator is required for the light source.
• Also available with a laser mount or turret (objective mount).
Magnification of tube
1X
Reflected illumination
- Telecentric system with
aperture stop system
- Fibre-optic illuminator
(optional) is required
Light source
Halogen bulb (21V, 150W)
(optional)
Objective lenses for
M Plan Apo, M Plan Apo SL, G
bright field observation Plan Apo
(Optional accessory)
Objective lenses for
laser cutting
(Optional accessory)
M plan Apo NIR, LCD Plan
Apo NIR, M Plan Apo NUV
and LCD Plan Apo NUV
Objective lenses for
laser machining
(Optional accessory)
M Plan UV (for 378-508 only)
VMU-H
378-506
VMU-V
378-505
VMU-LB
378-507
VMU-L4B
378-508
Selection Guide to System Configuration
(Depends on each system configuration)
No.
378-505
378-506
378-507
378-508*
Applicable Wavelength
Near-infrared and visible radiation
Near-infrared and visible radiation
Near-infrared, visible,
near-ultraviolet radiation
Near infrared, visible, near ultraviolet and
ultraviolet radiation
Vertical CCD
camera
mount
Yes
Horizontal
CCD camera mount
YAG laser
mount
Fibre optic
illumination
unit
Mass
570 g
590 g
Yes
Yes
Yes
Yes
1270 g
Yes
Yes
Yes
1300 g
510
The prices listed are suggested retail prices (valid until 31st May 2012). Inch products and combined inch/metric products are generally intended
for sale to the United Kingdom only. All products are intended to be sold to commercial customers. Therefore VAT is not included.
* Please contact Mitutoyo for more information on delivery times.
Eyepieces
Optional accessories
No.
516576
516577
516578
516848
516849
516850
Description
Reticle broken cross-hair 90°, 60°
Reticle concentric circle D1,2 mm
20 mm scale (Min. reading: 0,1 mm)
with cross hair reticle
Reticle cross-hair
10 mm scale (Min. reading : 0,1 mm)
5 mm scale (Min. reading : 0,05 mm)
Series 378
• Extra-wide field of view type.
• Optional reticles are available.
• Applicable microscope models: MF-C, MF-UC, Hyper MF, Hyper MF-U, FS-300, FS70, VM-Zoom40.
378-856
378-857
378-858
Two-piece sets
*¹ : For FS-300 only : Reticles not applicable for this eyepiece
No.
Magnification Field number Correction range Eye point Mass
378-851
10X *¹
30
-8D to +4D
High
250 g
378-856
10X
24
-10D to +5D
High
85 g
378-857
15X
16
-8D to +5D
Normal 40 g
378-858
20X
12
-8D to +5D
Normal 55 g
Individual
No.
Magnification Field number Correction range Eye point
378-856-5
10X
24
-10D to +5D
High
378-857-5
15X
16
-8D to +5D
Normal
378-858-5
20X
12
-8D to +5D
Normal
The prices listed are suggested retail prices (valid until 31st May 2012). Inch products and combined inch/metric products are generally intended
for sale to the United Kingdom only. All products are intended to be sold to commercial customers. Therefore VAT is not included.
* Please contact Mitutoyo for more information on delivery times.
511
Mass
85 g
40 g
55 g
Objective lenses M Plan
Series 378
Specifications
The Mitutoyo 378 Series objectives have the world's longest working distance and an infinity correction optical system. These objectives provide flexible observation at high magnifications and
independent correction of chromatic aberration.
Features - The long working distance type objectives
provide excellent clearance between the lens
surface and the workpiece surface in focus,
making it possible to observe workpieces
which are usually hard-to-focus because of
awkward projections.
- The metallurgical plan apochromatic (M
Plan Apo) objective is an excellent optical
system. This objective provides a flat,
chromatic aberration-free image throughout
the field of view, making it is suitable for
any type of microscope.
- Specially designed objectives are also
available with correction for the nearinfrared, near-ultraviolet and ultraviolet
regions of the spectrum, or various
thicknesses of LCD screen glass.
M Plan Apo and M Plan Apo SL
Objectives for bright field observation
- The mounting screw threads of objectives
are designed to conform to JIS B-7141-1988.
BD Plan Apo and BD Plan Apo SL
Objectives for bright/dark field observation
Near-infrared wavelength corrected M Plan Apo NIR
objectives
Near-ultraviolet wavelength corrected M Plan Apo NUV objectives
Ultraviolet wavelength corrected M Plan UV objectives
512
The prices listed are suggested retail prices (valid until 31st May 2012). Inch products and combined inch/metric products are generally intended
for sale to the United Kingdom only. All products are intended to be sold to commercial customers. Therefore VAT is not included.
* Please contact Mitutoyo for more information on delivery times.
M Plan Apo and M Plan Apo SL
Series 378
Specifications
Abbreviations
in product table
Mag. : Magnification
N.A. : Numerical aperture
W.D. : Working distance
f : Focal distance
R : Resolving power
D.F. : Focal depth
View field 1 : Field of view when
using ø24 mm eyepiece
View field 2 : Field of view when
using 1/2" CCD camera
378-800-3
378-801-6
378-802-6
378-807-3
378-803-3
378-804-3
378-805-3
378-806-3
M Plan Apo for Bright Field Observation
Compatible with microscope types VMU / VM-ZOOM40 / FS-70 / FS-300 / MF-U / Hyper MF-U
Note : Polarizing unit (378-074) is required when using 1X objective.
No.
Mag. N.A.
W.D.
f
R
D.F.
View field 1 View field 2 Mass g
378-800-3
1X 0.025 11.0 mm 200 mm 11.0 µm 440 µm
ø24 mm
4.8x6.4 mm
300 g
378-801-6
2X 0.055 34.0 mm 100 mm 5.0 µm 91 µm
ø12 mm
2.4x3.2 mm
220 g
378-802-6
5X
0.14 34.0 mm 40 mm
2.0 µm 14.0 µm ø4.8 mm 0.96x1.28 mm 240 g
378-807-3* 7.5X 0.21 35.0 mm 26.67 mm 1.3 µm 6.2 µm
ø3.6 mm 0.64x0.85 mm 240 g
378-803-3
10X 0.28 33.5 mm 20 mm
1.0 µm 3.5 µm
ø2.4 mm 0.48x0.64 mm 230 g
378-804-3
20X 0.42 20.0 mm 10 mm
0.7 µm 1.6 µm
ø1.2 mm 0.24x0.32 mm 270 g
378-805-3
50X 0.55 13.0 mm
4 mm
0.5 µm 0.9 µm ø0.48 mm 0.10x0.13 mm 290 g
378-806-3 100X 0.70 6.0 mm
2 mm
0.4 µm 0.6 µm ø0.24 mm 0.05x0.06 mm 320 g
M Plan Apo SL for Bright Field Observation
Compatible with microscope types VMU / VM-ZOOM40 / FS-70 / FS-300 / MF-U / Hyper MF-U
Note : These objectives offer extra-long working distance.
No.
Mag. N.A.
W.D.
f
R
D.F. View field 1 View field 2 Mass g
378-810-3 20X 0.28 30.5mm 10 mm 1.0µm 3.5µm
ø1.2mm
0.24x0.32mm 240 g
378-811-3 50X 0.42 20.5 mm 4 mm 0.7 µm 1.6 µm ø0.48 mm 0.10x0.13 mm 280 g
378-812-3 80X 0.50 15.0 mm 2.5 mm 0.6 µm 1.1 µm ø0.3 mm
0.06x0.08 mm 280 g
378-813-3 100X 0.55 13.0 mm 2 mm 0.5 µm 0.9 µm ø0.24 mm 0.05x0.06 mm 290 g
378-816-3 200X 0.62 13.0 mm 1 mm 0.4 µm 0.7 µm ø0.12 mm 0.025x0.03 mm 490 g
378-810-3
378-811-3
378-813-3
378-816-3
The prices listed are suggested retail prices (valid until 31st May 2012). Inch products and combined inch/metric products are generally intended
for sale to the United Kingdom only. All products are intended to be sold to commercial customers. Therefore VAT is not included.
* Please contact Mitutoyo for more information on delivery times.
513
378-812-3
M Plan Apo HR and G Plan Apo
Series 378
Specifications
Abbreviations
in product table
378-788-4
378-814-4
378-815-4
Mag. : Magnification
N.A. : Numerical aperture
W.D. : Working distance
f : Focal distance
R : Resolving power
D.F. : Focal depth
View field 1 : Field of view when
using ø24 mm eyepiece
View field 2 : Field of view when
using 1/2" CCD camera
M Plan Apo HR for Bright Field Observation
Compatible with microscope types VMU / VM-ZOOM40 / FS-70 / FS-300 / MF-U / Hyper MF-U
Note : These objectives offer extra-high resolving power.
No.
Mag. N.A. W.D.
f
R
D.F.
View field 1 View field 2 Mass g
378-788-4 10X 0.42 15 mm 20 mm 0.7 µm 1.6 µm
ø2.4 mm 0.48x0.64 mm 460 g
378-814-4 50X 0.75 5.2 mm 4 mm 0.4 µm 0.49 µm ø0.48 mm 0.10x0.13 mm 400 g
378-815-4 100X 0.90 1.3 mm 2 mm 0.3 µm 0.34 µm ø0.24 mm 0.05x0.06 mm 410 g
Glass Thickness Corrected
G Plan Apo for Bright Field Observation
Compatible with microscope types VMU / VM-ZOOM40 / FS-70 / FS-300 / MF-U / Hyper MF-U
Note : The G Plan Apo Series are designed for observing a workpiece through glass (thickness : 3,5 mm).
No.
Mag. N.A.
W.D.
f
R
D.F. View field 1 View field 2 Mass g
378-847
20X 0.28 29.42 mm 10 mm 1.0 µm 3.5 µm ø1.2 mm 0.24x0.32 mm 270 g
378-848-3 50X 0.50 13.89 mm 4 mm 0.6 µm 1.1 µm ø0.48 mm 0.10x0.13 mm 320 g
378-847
378-848-3
514
The prices listed are suggested retail prices (valid until 31st May 2012). Inch products and combined inch/metric products are generally intended
for sale to the United Kingdom only. All products are intended to be sold to commercial customers. Therefore VAT is not included.
* Please contact Mitutoyo for more information on delivery times.
BD Plan Apo and BD Plan Apo SL
Series 378
Specifications
Abbreviations
in product table
Mag. : Magnification
N.A. : Numerical aperture
W.D. : Working distance
f : Focal distance
R : Resolving power
D.F. : Focal depth
View field 1 : Field of view when
using ø24 mm eyepiece
View field 2 : Field of view when
using 1/2" CCD camera
378-831-7
378-832-7
378-833-7
378-834-7
378-835-7
378-836-7
378-830-7
BD Plan Apo for Bright/Dark Field Observation
Compatible with microscope types FS-300 / MF-U / Hyper MF-U
No.
Mag. N.A. W.D.
f
R
D.F.
View field 1
378-831-7* 2X 0.055 34 mm 100 mm 5.0 µm 91.0 µm
ø12 mm
378-832-7* 5X
0.14 34 mm 40 mm 2.0 µm 14.0 µm ø4.8 mm
378-830-7* 7.5X 0.21 34 mm 26.67 mm 1.3 µm 6.2 µm
ø3.6 mm
378-833-7* 10X 0.28 34 mm 20 mm 1.0 µm 3.5 µm
ø2.4 mm
378-834-7* 20X 0.42 20 mm 10 mm 0.7 µm 1.6 µm
ø1.2 mm
378-835-7
50X 0.55 13 mm
4 mm
0.5 µm 0.9 µm ø0.48 mm
378-836-7* 100X 0.70 6 mm
2 mm
0.4 µm 0.6 µm ø0.24 mm
BD Plan Apo SL for Bright/Dark Field Observation
Compatible with microscope types FS-300 / MF-U / Hyper MF-U
Note : These objectives offer extra-long working distance.
No.
Mag. N.A.
W.D.
f
R
D.F. View field 1
378-840-7* 20X 0.28 30.5 mm 10 mm 1.0 µm 3.5 µm ø1.2 mm
378-841-7* 50X 0.42 20.0 mm 4 mm 0.7 µm 1.6 µm ø0.48 mm
378-842-7* 80X 0.50 13.0 mm 2.5 mm 0.6 µm 1.1 µm ø0.3 mm
378-843-7* 100X 0.55 13.0 mm 2 mm 0.5 µm 0.9 µm ø0.24 mm
378-840-7
378-841-7
378-842-7
378-843-7
The prices listed are suggested retail prices (valid until 31st May 2012). Inch products and combined inch/metric products are generally intended
for sale to the United Kingdom only. All products are intended to be sold to commercial customers. Therefore VAT is not included.
* Please contact Mitutoyo for more information on delivery times.
515
View field 2 Mass g
2.4x3.2 mm
340 g
0.96x1.28 mm 350 g
0.64x0.85 mm 350 g
0.48x0.64 mm 350 g
0.24x0.32 mm 400 g
0.10x0.13 mm 440 g
0.05x0.06 mm 460 g
View field 2 Mass g
0.24x0.32 mm 350 g
0.10x0.13 mm 410 g
0.06x0.08 mm 430 g
0.05x0.06 mm 440 g
M Plan Apo NIR and BD Plan Apo HR
Series 378
Specifications
378-822-5
378-823-5
378-825-5
378-826-5
378-824-5
Abbreviations
Mag. : Magnification
in product table N.A. : Numerical aperture
W.D. : Working distance
f : Focal distance
R : Resolving power
D.F. : Focal depth
View field 1 : Field of view when
using ø24 mm eyepiece
View field 2 : Field of view when
using 1/2" CCD camera
378-863-5
378-864-5
Near-infrared wavelength Corrected
M Plan Apo NIR for Bright Field Observation
Compatible with microscope types VMU / VMZOOM-40 / FS-70 / FS-300
No.
Mag. N.A.
W.D.
f
R
D.F.
View field 1
378-822-5 5X 0.14 37.5 mm 40 mm 2.0 µm 14.0 µm ø4.8 mm
378-823-5 10X 0.26 30.5 mm 20 mm 1.1 µm 4.1 µm
ø2.4 mm
378-824-5 20X 0.40 20.0 mm 10 mm 0.7 µm 1.7 µm
ø1.2 mm
378-825-5 50X 0.42 17.0 mm 4 mm 0.7 µm 1.6 µm ø0.48 mm
378-863-5 50X 0.65 10 mm 4 mm 0.42 µm 0.65 µm ø0.48 mm
378-826-5 100X 0.50 12.0 mm 2 mm 0.6 µm 1.1 µm ø0.24 mm
378-864-5 100X 0.70 10 mm 2 mm 0.39 µm 0.56 µm ø0.24 mm
View field 2 Mass g
0.96x1.28 mm 220 g
0.48x0.64 mm 250 g
0.24x0.32 mm 300 g
0.10x0.13 mm 315 g
0.10x0.13 mm 450 g
0.05x0.06 mm 335 g
0.05x0.06 mm 450 g
M Plan Apo NIR Note :
These objectives are designed so that
the image of a workpiece remains
focused within the focal depth even
when the wavelength used is
changed from within the visible
range up to the near-infrared (480
to 1800 nm).
Therefore the M Plan NIR Series are
suitable for laser repair. However,
when the wavelength used exceeds
1100 nm, the focussing position may
deviate slightly from that in the
visible range due to changes in glass
dispersion and refractive index.
BD Plan Apo HR for Bright/Dark Field Observation
Compatible with microscope types FS-300 / MF-U / Hyper MF-U
Note : These objectives offer extra-high resolving power.
No.
Mag. N.A. W.D.
f
R
D.F.
View field 1 View field 2 Mass g
378-845-7* 50X 0.75 5.2 mm 4 mm 0.4 µm 0.49 µm ø0.48 mm 0.10x0.13 mm 530 g
378-846-7* 100X 0.90 1.3 mm 2 mm 0.3 µm 0.34 µm ø0.24 mm 0.05x0.06 mm 545 g
378-845-7
378-846-7
516
The prices listed are suggested retail prices (valid until 31st May 2012). Inch products and combined inch/metric products are generally intended
for sale to the United Kingdom only. All products are intended to be sold to commercial customers. Therefore VAT is not included.
* Please contact Mitutoyo for more information on delivery times.
LCD Plan Apo NIR and M Plan Apo NUV
Series 378
Specifications
Abbreviations
Mag. : Magnification
in product table Mag./glass thickness : thickness
N.A. : Numerical aperture
W.D. : Working distance
f : Focal distance
R : Resolving power
D.F. : Focal depth
View field 1 : Field of view when
using ø24 mm eyepiece
View field 2 : Field of view when
using 1/2" CCD camera
M Plan Apo
NUV
Note :
These objectives are designed so
that the image of a workpiece
remains focused within the focal
depth even when the wavelength
used is changed from within the
visible range down to the nearultraviolet (620 to 355 nm).
Therefore The M Plan NUV Series are
suitable for laser repair using a short
wavelength laser beam.
378-827-5
378-828-5
Near-infrared wavelength and LCD Glass Thickness Corrected
LCD Plan Apo NIR for Bright Field Observation
Compatible with microscope types VMU / VM-ZOOM40 / FS-70 / FS-300
Note : W.D. is just measured in air, not through an LCD glass
Mag./glass thickness
No.
N.A.
W.D.
f
R
(mm)
378-827-5*
20X/t1.1
0.40 19.98 mm 10 mm 0.7 µm
378-828-5
50X/t1.1
0.42 17.13 mm 3.9 mm 0.7 µm
378-829-5*
50X/t0.7
0.42 17.26 mm 3.9 mm 0.7 µm
378-752-5
100X/t1.1
0.50 12.13 mm 2 mm 0.6 µm
378-754-5*
100X/t0.7
0.50 11.76 mm 2 mm 0.6 µm
378-829-5
D.F.
View field 1
View field 2
Mass g
1.7 µm
1.6 µm
1.6 µm
1.1 µm
1.1 µm
ø1.2 mm
ø0.48 mm
ø0.48 mm
ø0.24 mm
ø0.24 mm
0.24x0.32 mm
0.10x0.13 mm
0.10x0.13 mm
0.05x0.06 mm
0.05x0.06 mm
305 g
320 g
320 g
335 g
335 g
Near-ultraviolet wavelength Corrected
M Plan Apo NUV for Bright Field Observation
Compatible with microscope types VMU / VM-ZOOM40 / FS-70
No.
Mag. N.A.
W.D.
f
R
D.F.
View field 1
378-809-5* 10X 0.28 30.5 mm 20 mm 1 µm
3.5 µm
ø2.4 mm
378-817-4
20X 0.40 17.0 mm 10 mm 0.7 µm 1.7 µm
ø1.2 mm
378-818-4
50X 0.42 15.0 mm 4 mm 0.7 µm 1.6 µm ø0.48 mm
378-888-4* 50X 0.65 10.00 mm 4 mm 0.42 µm 0.65 µm ø0.48 mm
378-819-4 100X 0.50 11.0 mm 2 mm 0.6 µm 1.1 µm ø0.24 mm
378-809-5
View field 2 Mass g
0.48x0.64 mm 255 g
0.24x0.32 mm 340 g
0.10x0.13 mm 350 g
0.10x0.13 mm 500 g
0.05x0.06 mm 380 g
378-817-4
378-888-4
378-818-4
The prices listed are suggested retail prices (valid until 31st May 2012). Inch products and combined inch/metric products are generally intended
for sale to the United Kingdom only. All products are intended to be sold to commercial customers. Therefore VAT is not included.
* Please contact Mitutoyo for more information on delivery times.
378-819-4
517
LCD Plan Apo NUV and M Plan UV
Series 378
378-820-4
Specifications
378-751-4
Near-ultraviolet wavelength and LCD Glass Thickness Corrected
LCD Plan Apo NUV for Bright Field Observation
Compatible with microscope types VMU / VM-ZOOM40 / FS-70
Note : For 378-820-4, W.D. is just measured in air, not through an LCD glass
Mag./glass thickness
No.
N.A.
W.D.
f
R
D.F. View field 1 View field 2 Mass g
(mm)
378-753-4*
50X/t1,1
0.42 14.53 mm 4 mm 0.7 µm 1.6 µm ø0.48 mm 0.10x0.13 mm 310 g
378-820-4
50X/t0,7
0.42 14.76 mm 4 mm 0.7 µm 1.6 µm ø0.48 mm 0.10x0.13 mm 310 g
378-751-4*
100X/t1,1
0.50 11.03 mm 2 mm 0.6 µm 1.1 µm ø0.24 mm 0.05x0.06 mm 380 g
Ultraviolet wavelength Corrected
M Plan UV for Bright Field Observation
Compatible with microscope types VMU / VM-ZOOM40 / FS-70
No.
Mag. N.A.
W.D.
f
R
D.F. View field 1
378-844-5* 10X 0.25 20 mm 20 mm 1.1 µm 4.4 µm ø2.4 mm
378-837-5* 20X 0.36 15.0 mm 10 mm 0.8 µm 2.1 µm ø1.2 mm
378-838-5
50X 0.40 12.0 mm 4 mm 0.7 µm 1.7 µm ø0.48 mm
378-839-5* 80X 0.55 10.0 mm 2.5 mm 0.5 µm 0.9 µm ø0.3 mm
378-844-5
378-837-5
378-838-5
378-839-5
518
Abbreviations Mag. : Magnification
in product table Mag./glass thickness : Magnification/
Thickness
N.A. : Numerical aperture
W.D. : Working distance
f : Focal distance
R : Resolving power
D.F. : Focal depth
View field 1 : Field of view when
using ø24 mm eyepiece
View field 2 : Field of view when
using 1/2" CCD camera
M Plan UV
View field 2 Mass g
0.48x0.64 mm 310 g
0.24x0.32 mm 330 g
0.10x0.13 mm 400 g
0.06x0.08 mm 380 g
Note :
These ultraviolet corrected objectives
are designed so that a the image of
a workpiece remains focused within
the focal depth even when the
wavelength used is changed from
within the visible range down to the
ultraviolet (550 to 266 nm).
Therefore the M Plan UV Series are
suitable for laser repair using a short
wavelength laser beam.
The prices listed are suggested retail prices (valid until 31st May 2012). Inch products and combined inch/metric products are generally intended
for sale to the United Kingdom only. All products are intended to be sold to commercial customers. Therefore VAT is not included.
* Please contact Mitutoyo for more information on delivery times.
PJ-A3000 Measuring Projector
Series 302
Specifications
Projected image
Projector screen
Projection lens
Magnification
accuracy
Contour
illumination
Surface
illumination
Focusing
Resolution
Power supply
Inverted
Effective diameter : 315 mm/12.4"
Screen material : Fine-ground glass
Screen rotation : ±360°, fine feed
and clamp
Angle display : Digital counter (LED)
Resolution : 1' or 0.01° (switchable)
Range : ±370°
ABS/INC mode switching, Zero Set
Reference lines : Cross-hairs
10X (990948)
Optional : 20X, 50X, 100X
Contour illumination : ±0.1% or
better
Surface illumination : ±0.15% or
better
Light source : Halogen bulb (24V,
150W)
Optical system : Telecentric
Functions : 2-step (High/Low)
brightness switch, Heat-absorbing
filter, Cooling fan
Light source : Halogen bulb (24V,
150W)
Optical system : Vertical illumination
with adjustable condenser lens
Functions : Heat-absorbing filter,
Cooling fan
Manual
0,001 mm or 0,001 mm/0.0001"
(0,001 mm/0.00005" : digital head)
220 - 240V AC, 50/60Hz
• The PJ-A3000 Series profile projectors are medium-size models that feature excellent versatility
and easy operation.
• Easy-to-read digital XY counter is located near the projection screen to minimize eye movement.
• Digital readout protractor screen facilitates angle measurement.
302-701D
D : Max. workpiece diameter
W : Working distance
H : Max. workpiece height
302-704 - 302-714
302-708 - 302-718
302-709 - 302-719
302-702 - 302-712
302-706
302-701 - 302-711
302-705
302-700
( ) When using surface illumination
* Including 302-700D
The prices listed are suggested retail prices (valid until 31st May 2012). Inch products and combined inch/metric products are generally intended
for sale to the United Kingdom only. All products are intended to be sold to commercial customers. Therefore VAT is not included.
* Please contact Mitutoyo for more information on delivery times.
519
302-703 - 302-713
302-707
PJ-A3000 Measuring Projector
Series 302 - Metric model
Standard accessories
Metric
XY stage 50 x 50 or 100 x 100 mm
Model
PJ-A3005D-50
PJ-A3005D-50E
PJ-A3005R-50
PJ-A3010F-100 PJ-A3010F-100E
No.
302-704D*
302-708D*
302-709D*
302-703D
302-707D*
XY stage travel range
50 x 50
50 x 50
50 x 50
100 x 100
100 x 100
(mm)
Measurement method
Rotary encoder Rotary encoder
Analog head
Linear encoder Linear encoder
Quick-release mechanism
_
_
_
X and Y axes
X and Y axes
XY stage table top size
152 x 152
152 x 152
152 x 152
250 x 250
250 x 250
(mm)
XY stage effective area
82 x 82
82 x 82
82 x 82
142 x 142
142 x 142
(mm)
Stage glass No.
380405
380405
380405
12BAE041
12BAE041
Swiveling function
_
_
_
_
_
Max stage loading
10 kg
10 kg
10 kg
10 kg
10 kg
Remarks
_
w/o angle counter w/o digital counter
_
w/o angle counter
Mass (kg)
107
107
106
112
112
Metric
XY stage 150 x 50 or 200 x 100 mm or fixed
Model
PJ-A3000
PJ-A3005F-150 PJ-A3005F-150E PJ-A3010F-200 PJ-A3010F-200E
No.
302-700D*
302-702D
302-706D*
302-701D
302-705D*
XY stage travel range
Fixed
150 x 50
150 x 50
200 x 100
200 x 100
(mm)
Measurement method
_
Linear encoder Linear encoder Linear encoder Linear encoder
Quick-release mechanism
_
X and Y axes
X and Y axes
X and Y axes
X and Y axes
XY stage table top size
160 x 145
280 x 152
280 x 152
380 x 250
380 x 250
(mm)
XY stage effective area
ø70
185 x 84
185 x 84
266 x 170
266 x 170
(mm)
Stage glass No.
200673
381349
381349
382762
382762
Swiveling function
_
_
_
±3°
±3°
Max stage loading
15 kg
8 kg
8 kg
8 kg
8 kg
Remarks
w/o angle counter
_
w/o angle counter
_
w/o angle counter
Mass (kg)
109
116
116
140
116
No.
172-202
383876
512305
Description
Projection lens 10X
Protective hood
Halogen bulb (24V, 150W)
Optional accessories
No.
176-105
172-197
176-106
172-198
172-196
172-378
12AAE671
176-107
172-116
172-118
172-160-2
172-160-3
172-161
172-203
172-204
172-207
172-229
172-230
172-269
264-145D
264-146D
332-151
512305
999678D
Description
Swivel centre support
Swivel centre support
Rotary table 66 mm
Rotary table 100 mm with fine
adjustment
Rotary table 100 mm
V-block with clamp
(Max. workpiece ø25 mm)
Detector mounting plate for ø250 to
ø350 mm
Holder with clamp
Standard scale 50 mm
Reading scale 200 mm
Green filter
Green filter
Reading scale 300 mm
Projection lens 20X
Projection lens 50X
Projection lens 100X
Oblique illumination mirror 10X
Projection lens
Oblique illumination mirror 20X
Projection lens
Machine stand
Tabletop type QM-Data 200
Built-on type QM-Data 200
Optoeye-200
Halogen bulb (24V, 150W)
Fixture mount adapter
176-106 : for stage 50 x 50 and 150 x 50 mm
172-196 and 172-198 : for stage 100 x 100 and 200 x 100 mm
* Fixture mount adapter (999678)
is required for 302-701D, 302-705D
A = 593 mm : 302-701/302-705/302-711
A = 427 mm : 302-703/302-707/302-713
A = 455 mm : 302-704/302-708/302-714/302-718
A = 378 mm : 302-709/302-719
A = 446 mm : 302-702/302-706/302-712
520
The prices listed are suggested retail prices (valid until 31st May 2012). Inch products and combined inch/metric products are generally intended
for sale to the United Kingdom only. All products are intended to be sold to commercial customers. Therefore VAT is not included.
* Please contact Mitutoyo for more information on delivery times.
PJ-A3000 Measuring Projector
Series 302 - Inch/Metric model
Optional accessories
No.
176-105
172-197
176-106
172-198
172-196
172-378
176-107
172-116
172-118
172-160-2
172-160-3
172-161
172-203
172-204
172-207
172-229
172-230
172-269
999678D
Description
Swivel centre support
Swivel centre support
Rotary table 66 mm
Rotary table 100 mm with fine
adjustment
Rotary table 100 mm
V-block with clamp
(Max. workpiece ø25 mm)
Holder with clamp
Standard scale 50 mm
Reading scale 200 mm
Green filter
Green filter
Reading scale 300 mm
Projection lens 20X
Projection lens 50X
Projection lens 100X
Oblique illumination mirror 10X
Projection lens
Oblique illumination mirror 20X
Projection lens
Machine stand
Fixture mount adapter
176-106 : for stage 50 x 50 and 150 x 50 mm
172-196 and 172-198 : for stage 100 x 100 and 200 x 100 mm
999678D : for stage 200 x 100 mm
Optional accessories for Inch
No.
172-117
172-119
172-162
264-145E
264-146E
Description
Standard scale (2")
Reading scale (8")
Reading scale (12")
Tabletop type QM-Data 200 UK only
Built-on type QM-Data 200 UK only
172-378
172-116
Metric/Inch
UK only
Model
No.
XY stage travel range
(mm)
Measurement method
Quick-release mechanism
XY stage table top size
(mm)
XY stage effective area
(mm)
Stage glass No.
Swiveling function
Max stage loading
PJA3005D-50
302-714E*
PJA3005D-50E
302-718E*
PJA3005R-50
302-719E*
PJA3010F-100
302-713E
PJA3005F-150
302-712E*
PJA3010F-200
302-711E
50 x 50
50 x 50
50 x 50
100 x 100
150 x 50
200 x 100
Rotary
encoder
_
Rotary
encoder
_
_
Linear
encoder
X and Y axes
Linear
encoder
X and Y axes
Linear
encoder
X and Y axes
152 x 152
152 x 152
152 x 152
250 x 250
280 x 152
380 x 250
82 x 82
82 x 82
82 x 82
142 x 142
185 x 84
266 x 170
380405
_
10 kg
380405
_
10 kg
w/o angle
counter
107
380405
_
10 kg
w/o digital
counter
106
12BAE041
_
10 kg
381349
_
8 kg
382762
±3°
15 kg
_
_
_
112
116
140
302-719D*
PJA3010F-100
302-713D*
PJA3005F-150
302-712D*
PJA3010F-200
302-711D*
50 x 50
100 x 100
150 x 50
200 x 100
_
Linear
encoder
X and Y axes
Linear
encoder
X and Y axes
Linear
encoder
X and Y axes
152 x 152
250 x 250
280 x 152
380 x 250
Remarks
_
Mass (kg)
107
Analog head
Metric/Inch
Europe except UK
PJA3005D-50
No.
302-714D*
XY stage travel range
50 x 50
(mm)
Rotary
Measurement method
encoder
Quick-release mechanism
_
XY stage table top size
152 x 152
(mm)
XY stage effective area
82 x 82
(mm)
Stage glass No.
380405
Swiveling function
_
Max stage loading
10 kg
Model
Remarks
_
Mass (kg)
107
PJA3005D-50E
302-718D*
PJ-A3005R-50
50 x 50
Rotary
encoder
_
Analog head
152 x 152
82 x 82
82 x 82
142 x 142
185 x 84
266 x 170
380405
_
10 kg
w/o angle
counter
107
380405
_
10 kg
w/o digital
counter
106
12BAE041
_
10 kg
381349
_
8 kg
382762
±3°
15 kg
_
_
_
112
116
140
176-107
172-118
172-161
Optoeye-200
A = 593 mm : 302-701/302-705/302-711 - A = 427 mm : 302-703/302-707/302-713
A = 455 mm : 302-704/302-708/302-714/302-718 - A = 378 mm : 302-709/302-719
A = 446 mm : 302-702/302-706/302-712
264-145
172-229
The prices listed are suggested retail prices (valid until 31st May 2012). Inch products and combined inch/metric products are generally intended
for sale to the United Kingdom only. All products are intended to be sold to commercial customers. Therefore VAT is not included.
* Please contact Mitutoyo for more information on delivery times.
172-160-3
521
PJ-H30 Measuring Projector
Series 303
Specifications
• Incident illumination with variable incident light adjustment.
• By rotating the condenser lens and changing the angle of the half-silvered mirror in the objective, even poorly reflecting surfaces can be represented optimally.
• Improved light intensity of a projected subject thanks to the new optical contour illumination
system.
• High measuring accuracy (above JIS standard).
• Measuring stage with rapid single-handed adjustment on both axes for smooth switching between quick positioning and fine adjustment.
• Constant current power supply unit with acceleration control to maximize the service life of the
halogen lamp.
• Easily read digital counter with large digit display.
• Built-in precision edge detector (Optoeye) on models PJ-H30 B/D.
• RS-232C output.
Accuracy
Projected image
Projector screen
Projection lens
Magnification
accuracy
Contour
illumination
Surface
illumination
Power supply
Resolution
(3+0,02L) µm
L : Max length measurement
Erect
Effective diameter : 306 mm / 12"
Screen material : Fine-ground glass
Screen rotation : ±360°, fine
adjustment and clamp
Angle display : Digital counter (LED)
Resolution : 1' or 0.01° (switchable)
Range : ±370°
ABS/INC mode switching, Zero Set
Reference lines : Cross-hairs
10X (172-472)
Optional : 5X, 20X, 50X, 100X
Contour illumination : ±0.1% or
better
Surface illumination : ±0.15% or
better
Light source : Halogen bulb (24V,
150W)
Optical system : Telecentric zoom
Functions : Continuously variable
brightness adjustment, Heatabsorbing filter, Cooling fan
Light source : Halogen bulb (24V,
150W)
Optical system : Vertical/Oblique
illumination with an adjustable
condenser lens
Functions : Continuously variable
brightness adjustment, Heatabsorbing filter, Cooling fan
220V AC, 50/60Hz
0,001 mm
303-735D
Vertical / oblique
switchable surface illumination
505B
Vertical illumination
Oblique illumination
D : Max. workpiece diameter
W : Working distance
H : Max. workpiece height
1010B
Profile Projector brochure on request
2010B
2017B
522
The prices listed are suggested retail prices (valid until 31st May 2012). Inch products and combined inch/metric products are generally intended
for sale to the United Kingdom only. All products are intended to be sold to commercial customers. Therefore VAT is not included.
* Please contact Mitutoyo for more information on delivery times.
PJ-H30 Measuring Projector
Series 303
• For UK models change suffix from D to E (e.g. 303-711E).
Profile projector brochure on request
Model 505B - 50 x 50 mm
XY stage table size : 300 x 240 mm
XY stage effective area : 180 x 150 mm
Stage glass No. : 380412
Swiveling function : ±3°
Max stage loading : 10 kgf
Mass : 176 kg
Model
PJ-H30E Fixed screen
No.
303-701D*
Edge detector
Optional
Focusing
Manual
PJ-H30A
303-711D*
Optional
Manual
PJ-H30B
303-721D*
Included
Manual
PJ-H30D
303-731D*
Included
Power focus
PJ-H30C
303-741D*
Optional
Power focus
Model 1010B - 100 x 100 mm
XY stage table size : 300 x 240 mm
XY stage effective area : 180 x 150 mm
Stage glass No. : 380412
Swiveling function : ±3°
Max stage loading : 10 kgf
Mass : 176 kg
Model
PJ-H30E Fixed screen
No.
303-702D*
Edge detector
Optional
Focusing
Manual
PJ-H30A
303-712D*
Optional
Manual
PJ-H30B
303-722D*
Included
Manual
PJ-H30D
303-732D*
Included
Power focus
PJ-H30C
303-742D*
Optional
Power focus
Model 2010B - 200 x 100 mm
XY stage table size : 350 x 280 mm
XY stage effective area : 250 x 150 mm
Stage glass No. : 382762
Swiveling function : ±3°
Max stage loading : 10 kgf
Mass : 178 kg
Model
PJ-H30E Fixed screen
No.
303-703D
Edge detector
Optional
Focusing
Manual
PJ-H30A
303-713D
Optional
Manual
PJ-H30B
303-723D
Included
Manual
Model 2017B - 200 x 170 mm
XY stage table size : 410 x 342 mm
XY stage effective area : 270 x 240 mm
Stage glass No. : 12BAD363
Swiveling function : ±5°
Max stage loading : 20 kgf
Mass : 205 kg
Model
PJ-H30E Fixed screen
No.
303-704D*
Edge detector
Optional
Focusing
Manual
PJ-H30A
303-714D*
Optional
Manual
PJ-H30B
303-724D*
Included
Manual
Model 3017B - 300 x 170 mm
XY stage table size : 510 x 342 mm
XY stage effective area : 370 x 240 mm
Stage glass No. : 12BAD330
Swiveling function : ±5°
Max stage loading : 20 kgf
Mass : 212 kg
Model
PJ-H30E Fixed screen
No.
303-705D*
Edge detector
Optional
Focusing
Manual
PJ-H30A
303-715D
Optional
Manual
PJ-H30B
303-725D
Included
Manual
The prices listed are suggested retail prices (valid until 31st May 2012). Inch products and combined inch/metric products are generally intended
for sale to the United Kingdom only. All products are intended to be sold to commercial customers. Therefore VAT is not included.
* Please contact Mitutoyo for more information on delivery times.
523
PJ-H30D
303-733D
Included
Power focus
PJ-H30D
303-734D*
Included
Power focus
PJ-H30D
303-735D*
Included
Power focus
PJ-H30C
303-743D*
Optional
Power focus
PJ-H30C
303-744D*
Optional
Power focus
PJ-H30C
303-745D*
Optional
Power focus
PJ-H30 Measuring Projector
Series 303
Standard accessories
No.
172-472
383876
512305
Description
Lens 10X
Protective hood
Halogen bulb (24V, 150W)
Optional accessories
No.
011534
176-105
172-197
172-198
176-305
176-306
172-378
1010B model
12AAE671
12AAG981
12AAG982
12AAG983
172-116
172-118
172-161
172-269
172-271
172-473
172-474
172-475
264-145D
264-146D
332-151
12AAA807D
3017B model
Description
Cleaner for optics
Swivel centre support
Swivel centre support
Rotary table 100 mm with fine
adjustment
Rotary table with fine feed wheel ø183
mm
Rotary table with fine feed wheel ø240
mm
V-block with clamp
(Max. workpiece ø25 mm)
Detector mounting plate for ø250 to
ø350 mm
Green filter
Mounting stand for QM-Data 200
Detector mounting bracket for PJ-H30A/
PJ-H30E
Standard scale 50 mm
Reading scale 200 mm
Reading scale 300 mm
Machine stand
Projection lens 5X
Projection lens 20X
Projection lens 50X
Projection lens 100X
Tabletop type QM-Data 200
Built-on type QM-Data 200
Optoeye-200
Cable RS-232C D-SUB 9/D-SUB 9 (2m)
Optional accessories for Inch
No.
172-117
172-119
172-162
264-145E
264-146E
Description
Standard scale (2")
Reading scale (8")
Reading scale (12")
Tabletop type QM-Data 200 UK only
Built-on type QM-Data 200 UK only
264-145D
* : Need to use with Rotary table
(172-198)
** : Fixture mount adapter
(176-317) is required
*** : Fixture mount adapter
(176-304) is required
524
The prices listed are suggested retail prices (valid until 31st May 2012). Inch products and combined inch/metric products are generally intended
for sale to the United Kingdom only. All products are intended to be sold to commercial customers. Therefore VAT is not included.
* Please contact Mitutoyo for more information on delivery times.
PV-5110 Measuring Projector
Series 304
Specifications
Projected image
Projector screen
Projection lens
Magnification
accuracy
Contour
illumination
Surface
illumination
Focusing
Resolution
Power supply
Mass
Inverted
Effective diameter : 508 mm/20"
Screen material : Fine-ground glass
Screen rotation : ±360°, fine
adjustment and clamp
Angle reading : Digital counter (LED)
Resolution : 1' or 0.01° (switchable)
Range : ±370°
ABS/INC mode switching, Zero Set
Reference lines : Cross-hairs
10X (172-402)
Optional : 5X, 20X, 50X, 100X
• This measuring projector is a robust stand-alone device.
• The large rotatable screen guarantees good observation and easy measuring.
Contour illumination : ±0.1% or
better
Surface illumination : ±0.15% or
better
Light source : Halogen bulb (24V,
150W)
Optical system : Telecentric zoom
Functions : 2-step (High/Low)
brightness switch, Heat-absorbing
filter, Cooling fan
Light source : Halogen bulb (24V,
150W)
Optical system : Vertical illumination
Functions : Adjustable condenser
lens, Oblique illumination (for 5X,
10X and 20X), Heat-absorbing filter,
Cooling fan
Manual
0,001 mm or 0,001 mm/0.0001"
220 - 240V AC, 50/60Hz
210 kg
304-909D
Counter is optional
D : Max. workpiece diameter
W : Working distance
H : Max. workpiece height
XY stage
KA Counter
( ) When using surface illumination
332-151
QM-Data 200
Profile Projector brochure on request
The prices listed are suggested retail prices (valid until 31st May 2012). Inch products and combined inch/metric products are generally intended
for sale to the United Kingdom only. All products are intended to be sold to commercial customers. Therefore VAT is not included.
* Please contact Mitutoyo for more information on delivery times.
525
PV-5110 Measuring Projector
Series 304 - Accessories/Dimensions
Model
No.
Remarks
XY stage travel range
(mm)
Measurement method
Quick-release mechanism
XY stage table top size
(mm)
XY stage effective area
(mm)
Stage glass No.
Swiveling function
Max stage loading
Standard accessories
PV-5110
304-909D
304-909E
304-909E UK only
No.
382762
12AAF182
172-402
Description
Stage glass 280x180 mm
Digital counter stand
10X projection lens set including :
172-409 Objective
172-410 Condenser
Surface illumination unit
Halogen bulb (24V, 150W)
200 x 100
Linear encoder
X and Y axes
380 x 250
266 x 170
382762
±3°
5 kg
172-419
512305
Optional accessories
No.
011534
174-173D
172-197
172-198
172-378
12AAE672
176-107
172-116
172-160-2
172-161
172-319
172-329
172-330
172-401
172-403
172-404
172-405
264-146D
510189
Description
Cleaner for optics
KA-Counter 2 Axis
Swivel centre support
Rotary table 100 mm with fine
adjustment
V-block with clamp
(Max. workpiece ø25 mm)
Detector mounting plate for ø500 to
ø600 mm
Holder with clamp
Standard scale 50 mm
Green filter
Reading scale 300 mm
Canopy
Reading scale (600 mm)
Standard scale (80 mm)
5X projection lens set including :
172-406 Objective
172-407 Condenser
932602 Adapter for objective
20X projection lens set including :
172-411 Objective
172-412 Condenser
50X projection lens set including :
172-413 Objective
172-414 Condenser
100X projection lens set including :
172-415 Objective
172-414 Condenser
Built-on type QM-Data 200
Protective hood
Optional accessories for Inch
No.
174-173E
172-117
172-162
264-146E
Description
KA-Counter 2 axis UK only
Standard scale (2")
Reading scale (12")
Built-on type QM-Data 200 UK only
172-319
526
The prices listed are suggested retail prices (valid until 31st May 2012). Inch products and combined inch/metric products are generally intended
for sale to the United Kingdom only. All products are intended to be sold to commercial customers. Therefore VAT is not included.
* Please contact Mitutoyo for more information on delivery times.
PH-A14 Measuring Projector
Series 172
Specifications
Projected image
Projector screen
Projection lens
Magnification
accuracy
Contour
illumination
Surface
illumination
Focusing
Resolution
Power supply
Mass
Inverted
Effective diameter : 356 mm/14"
Screen material : Fine-ground glass
Screen rotation : ±360°, fine
adjustment and clamp
Angle reading : Vernier,
graduation : 1'
Resolution : 1' or 0.01° (switchable)
Range : ±370°
Reference lines : Cross-hairs
10X (172-011)
Optional : 20X, 50X, 100X
Measuring Projector PH-A14
• Horizontal-beam illumination makes the PH-A14 suitable for measuring the larger and heavier
workpiece, such as toothed racks, punching tools, etc.
• Generous 203 x 102 mm stage travel and 45 kgf allowable stage loading ensures a wide
range of application.
Contour illumination : ±0.1% or
better
Surface illumination : ±0.15% or
better
Light source : Halogen bulb (24V,
150W)
Optical system : Telecentric
Functions : Heat-absorbing filter,
Cooling fan
Light source : Halogen bulb (24V,
150W)
Optical system : Vertical illumination
Functions : Adjustable condenser
lens, Heat-absorbing filter, Cooling
fan
Manual
0,001 mm or 0,001 mm/0.0001"
(using optional KA counter)
220 - 240V AC, 50/60Hz
140 kg
L : Max. workpiece width
W : Working distance
D : Max. workpiece diameter
172-810-10D
With optional evaluation unit QM-Data 200
KA Counter
The prices listed are suggested retail prices (valid until 31st May 2012). Inch products and combined inch/metric products are generally intended
for sale to the United Kingdom only. All products are intended to be sold to commercial customers. Therefore VAT is not included.
* Please contact Mitutoyo for more information on delivery times.
QM-Data200
527
332-151
PH-A14 Measuring Projector
Series 172 - Accessories/Dimensions
Standard accessories
mm
No.
172-011
512305
Description
Lens 10X for Profile Projector PH-A14
Halogen bulb (24V, 150W)
Optional accessories
1158
No.
172-132
011534
172-142
172-143
174-173D
172-144
172-234
454
158
612
Model
No.
Remarks
XY stage travel range
(mm)
Measurement method
XY stage table top size
(mm)
Max stage loading
12AAE671
1240
PH-A14
172-810-10D
172-810-10E
172-810-10E UK only
203 x 102
Linear encoder
407 x 153
45 kg
172-001
172-002
172-012
172-013
172-014
172-116
172-118
172-161
172-286
264-146D
332-151
58AAA407
Optional accessories for Inch
No.
174-173E
172-117
172-119
172-162
264-146E
528
Description
Vertical holder
Cleaner for optics
Centre support
Centre support riser
KA-Counter 2 Axis
Rotary vice
(Max. workpiece ø60 mm)
V-block with clamp
(Max. workpiece ø50 mm)
Detector mounting plate for ø250 to
ø350 mm
Support for straight gear
Support for flat gear
Lens 20X for Profile Projector PH-A14
Lens 50X for Profile Projector PH-A14
Lens 100X for Profile Projector PH-A14
Standard scale 50 mm
Reading scale 200 mm
Reading scale 300 mm
Green filter
Built-on type QM-Data 200
Optoeye-200
Tray for KA counter
Description
KA-Counter 2 axis UK only
Standard scale (2")
Reading scale (8")
Reading scale (12")
Built-on type QM-Data 200 UK only
The prices listed are suggested retail prices (valid until 31st May 2012). Inch products and combined inch/metric products are generally intended
for sale to the United Kingdom only. All products are intended to be sold to commercial customers. Therefore VAT is not included.
* Please contact Mitutoyo for more information on delivery times.
PH-3515F Measuring Projector
Series 172
Specifications
Projected image
Projector screen
Projection lens
Magnification
accuracy
Contour
illumination
Surface
illumination
Focusing
Resolution
Power supply
Mass
Inverted
Effective diameter : 356 mm/14"
Screen material : Fine-ground glass
Screen rotation : ±360°, fine feed
and clamp
Angle display : Digital counter (LED)
Resolution : 1' or 0.01° (switchable)
Range : ±370°
ABS/INC mode switching, Zero Set
Reference lines : Cross-hairs
10X (172-184)
Optional : 5X, 20X, 50X, 100X
Measuring Projector PH-3515F
• Horizontal-beam illumination makes the PH-3515F suitable for measuring the larger and heavier
workpiece, such as toothed racks, punching tools, ets.
• Generous 254 x 152 mm stage travel and 45 kgf allowable stage loading ensures a wide range of
application.
Contour illumination : ±0.1% or
better
Surface illumination : ±0.15% or
better
Light source : Halogen bulb (24V,
150W)
Optical system : Telecentric system
Functions : 2-step (High/Low)
brightness adjustment, Heatabsorbing filter, Cooling fan
Light source : Halogen bulb (24V,
150W)
Optical system : Vertical illumination
Functions : Adjustable condenser
lens, 2-step (High/Low) brightness
adjustment, Heat-absorbing filter,
Cooling fan
Manual
0,001 mm or 0,001 mm/0.0001"
220 - 240V AC, 50/60Hz
150 kg
L : Max. workpiece width
W : Working distance
D : Max. workpiece diameter
172-858D
Model
( ) When using surface illumination
PH-3515F
172-858D
172-858E
172-858E UK only
No.
Remarks
XY stage travel range
(mm)
Measurement method
Quick-release mechanism
XY stage table top size
(mm)
Swiveling function
Max stage loading
The prices listed are suggested retail prices (valid until 31st May 2012). Inch products and combined inch/metric products are generally intended
for sale to the United Kingdom only. All products are intended to be sold to commercial customers. Therefore VAT is not included.
* Please contact Mitutoyo for more information on delivery times.
254 x 152
Linear encoder
X axis
450 x 146
±10°
45 kg
529
PH-3515F Measuring Projector
Series 172 - Accessories/Dimensions
Standard accessories
No.
12BAA637
172-184
383228
512305
Description
Halogen bulb (24V, 200W)
Projection lens 10X
Protective hood
Halogen bulb (24V, 150W)
Optional accessories
No.
172-132
011534
172-142
172-143
172-144
174-173D
172-234
12AAE671
12AAF182
172-116
172-118
172-133
172-145
172-161
172-165
172-166
172-173
172-286
264-146D
332-151
932105
Description
Vertical holder
Cleaner for optics
Centre support
Centre support riser
Rotary vice
(Max. workpiece ø60 mm)
KA-Counter 2 Axis
V-block with clamp
(Max. workpiece ø50 mm)
Detector mounting plate for ø250 to
ø350 mm
Digital counter stand
Standard scale 50 mm
Reading scale 200 mm
Vertical surface illumination unit
Projection lens 5X with condenser
Reading scale 300 mm
Projection lens 50X with condenser
Projection lens 100X with condenser
Projection lens 20X with condenser
Green filter
Built-on type QM-Data 200
Optoeye-200
Overlay chart set (12 sheets)
(No. 512066 to 512077)
Optional accessories for Inch
No.
174-173E
172-117
172-119
172-162
264-146E
Description
KA-Counter 2 axis UK only
Standard scale (2")
Reading scale (8")
Reading scale (12")
Built-on type QM-Data 200 UK only
KA Counter
530
QM-Data 200
The prices listed are suggested retail prices (valid until 31st May 2012). Inch products and combined inch/metric products are generally intended
for sale to the United Kingdom only. All products are intended to be sold to commercial customers. Therefore VAT is not included.
* Please contact Mitutoyo for more information on delivery times.
Data Processing Unit QM-Data 200
Series 264
Specifications
Resolution
Screen
Program
functions
Statisical
processing
Measuring of
Geometric
Elements
Display system
Measurement
result file
output
Display
language
Data input
Data output
Power supply
Dimensions
_________
Functions
0.001/0.0001 mm
Graphic-LCD
(320 x 240 dot ; with background
lighting)
Part program creation, execution,
editing
Number of data, maximum value,
minimum value, mean value, standard
deviation, range, histogram
Maximum of 1000 elements, point,
line, circle, distance, ellipse,
rectangular hole, slotted hole,
intersection and intersecting angle
and point & angle, plus a number of
functions for evaluation, e.g.
perpendicularity and parallelism are
provided.
Monographic LCD (320 x 240 dots,
with LED back light)
CSV format; MUX-10F format
Japanese/English/German/French/
Italian/Spanish/Portuguese/Cheskey/
Chinese/Korean
RS-232C, X/Y/Z-axis signal, Footswitch
RS-232C, Printer, Floppy disk drive
unit, USB
100/240V AC, 50/60 Hz
260 x 242 x 310 mm : Stand-mount
type
318 x 153 x 275 mm : Arm-mount type
________________________
Mitutoyo's Al Function :
The Al function (Al=Artificial
Intelligence) renders choosing the
element type before measuring
obsolete. Point measurements are
analysed by the QM-Data and the
results for basic elements calculated,
thus accelerating the measuring
procedure.
Customized Operation :
Macro functions and the creation of
part programs speed up single and
repetition measurements.
Additionally macro commands and
part programs as well as frequently
used standard operations can be
stored as user menus.
• The Data Processing Unit QM 200 has been especially designed to process measurement data
generated by a profile projector or measuring microscope.
• Measuring instructions, measuring values and calculation results for various operations shown
on the back-lit LCD are easy to grasp and comprehend.
• Measuring results can also be printed, either by a small and convenient thermal printer (available as special option) or on a ESC/P printer and continuous paper.
• By connecting an optional floppy disk drive newly created part programs, measurement results as well as calculation results may be stored and/or loaded.
Arm-mount type
Stand-mount type
Mass
kg
264-145D
Stand-mount type
2.9
264-145E* Stand-mount type UK only
2.9
264-146D
Arm-mount type
2.8
264-146E
Arm-mount type UK only
2.8
264-149D*
For Hyper MF / MF-U
2.9
264-149E* For Hyper MF / MF-U UK only 2.9
No.
Description
Optional accessories
No.
908353-1
011119
12AAD033
12AAH035
12AAA807D
937179T
I-1525612
Description
Printer paper for thermal printer
RS-232C serial cable D-SUB 9/D-SUB 25
Thermal printer (with connection cable)
USB floppy disk drive unit
Cable RS-232C D-SUB 9/D-SUB 9 (2m)
Footswitch
Cable for printer (2 m)
Graphic display
Intuitive panel design
The prices listed are suggested retail prices (valid until 31st May 2012). Inch products and combined inch/metric products are generally intended
for sale to the United Kingdom only. All products are intended to be sold to commercial customers. Therefore VAT is not included.
* Please contact Mitutoyo for more information on delivery times.
531
OPTOEYE Edge Sensor
Series 332
Specifications
• Optoeye 200 reduces the effect of operator skill level on accuracy by automatically detecting
edges used in measurement.
• PJ-H30 : The Optoeye edge detector can be used on models PJ-H30A, PJ-H30C and PJ-H30E (requires adapter plate 12AAG983). An edge detector is built into the PJ-H30B/D models.
• PV-5110, PJ-3515F and PJ-A14 : The Optoeye edge detector can be used in conjunction with the
QM-Data 200.
• PJ-A3000 : The Optoeye edge detector can be used on models
302-701/302-702/302-703/302-705/302-706/302-707/302-711/302-712/302-713 in conjunction with
the QM-Data 200.
• When using the Optoeye all projector scales must be connected to QM-Data 200 directly and
built-in counters cannot be used any more (except PJ-H30B and D type)
Image detection Directivity : Direction selection not
required
Min. diameter
2 mm on the screen
Min. width
1 mm on the screen
Max. moving
speed
1000 mm/s
On the table : 4,5 mm/s (10 x
objective),
On the table : 5,5 mm/s (20 x, 50 x,
100 x objective)
Applicable
illumination
Function
Type : Surface/Contour illumination
Range : 30 to 2000 Lux on the screen
Bright-Dark field difference : 20 Lux
Automatic detection of feature
edges for use in measurement
Optional accessories
No.
12AAE671
12AAE672
Description
Detector mounting plate for ø250 to
ø350 mm
Detector mounting plate for ø500 to
ø600 mm
332-151
No.
Repeatibility
332-151 1 µm in contour illumination mode
532
The prices listed are suggested retail prices (valid until 31st May 2012). Inch products and combined inch/metric products are generally intended
for sale to the United Kingdom only. All products are intended to be sold to commercial customers. Therefore VAT is not included.
* Please contact Mitutoyo for more information on delivery times.
Overlay Chart Set
Group 1
Specifications
Grid divisions
10X : 0,1 mm / 0.005"
20X : 0,05 mm / 0.0025"
50X : 0,02 mm / 0.001"
100X : 0,01 mm / 0.0005"
For profile projectors
• These standard overlay charts increase the range of application and the efficiency of Mitutoyo
profile projectors.
• The charts are supplied in the sizes ø250, 300, 340, 500 and 600 mm to suit the screens of Mitutoyo projectors. A large range of scales and profiles is provided that enables workpiece features
to be tested quickly and easily. Length, height, parallelism, angle, radius, taper, bore position,
diameter, as well as all standardized thread and tooth profiles can be tested.
• All charts are made of a distortion-free special plastics compound and are provided with a protective coating.
Radius/protractor chart
Angle : Divisions at 1° and 30' intervals at 7" diameter increasing to 15' intervals at 11" diameter.
Features : Ideal for checking diameters, concentricity of diameters, radii, angles and cams
No.
Diameter
201383*
250 mm
201387
300 mm
201393
340 mm
512622
500 mm
511844
600 mm
999281UK
10"
999282UK
12"
999283UK
14"
999284UK
20"
999285UK
24"
Radius/protractor chart
Grid/protractor chart
Angle : 15° increments
Features : Ideal for checking diameters, concentricity of diameters, radii, angles and cams.
No.
Diameter
201380
250 mm
201386*
300 mm
201392
340 mm
512621*
500 mm
511843*
600 mm
999286UK
10"
999287UK
12"
999288UK
14"
999289UK
20"
999290UK
24"
Grid/protractor chart
Combination chart
Angle : Divisions at 10° and 30' intervals at 7" diameter increasing to 15' intervals at 11" diameter.
Features : All purpose chart for checking diameters, angles, radii and linear divisions
No.
Diameter
512651*
250 mm
512652
300 mm
512653*
340 mm
512654
500 mm
512655*
600 mm
999291UK
10"
999292UK
12"
999293UK
14"
999294UK
20"
999295UK
24"
Combination chart
The prices listed are suggested retail prices (valid until 31st May 2012). Inch products and combined inch/metric products are generally intended
for sale to the United Kingdom only. All products are intended to be sold to commercial customers. Therefore VAT is not included.
* Please contact Mitutoyo for more information on delivery times.
533
Overlay Chart Set
Group 1
Specifications
Concentric
Features : Dedicated chart especially designed for checking radii, diameters and concentricity with exceptional clarity.
No.
Diameter
201382 250 mm
Grid divisions
10X : 0,1 mm / 0.005"
20X : 0,05 mm / 0.0025"
50X : 0,02 mm / 0.001"
100X : 0,01 mm / 0.0005"
Radius chart
Features : Dedicated chart especially designed for checking radii, diameters and concentricity with exceptional clarity.
No.
Diameter
201388
300 mm
201394
340 mm
512623
500 mm
511845*
600 mm
999296UK
10"
999297UK
12"
999298UK
14"
999299UK
20"
999300UK
24"
Radius chart
Protractor chart
Angle : Divisions at 1° and 30' intervals at 7" diameter increasing to 15' intervals at 11" diameter.
Features : Dedicated chart especially designed for checking angles with exceptional clarity. Suitable for use at any
magnification.
No.
Diameter
201381*
250 mm
201389*
300 mm
201395
340 mm
512624*
500 mm
511846*
600 mm
999399UK
10"
999400UK
12"
999401UK
14"
999402UK
20"
999403UK
24"
Protractor chart
ISO Metric threads
No.
Diameter
201384* 250 mm
201390* 300 mm
201396
340 mm
512625* 500 mm
Involute gear teeth
No.
Diameter
201385
250 mm
201391* 300 mm
201397* 340 mm
512626
500 mm
ISO Metric threads
Involute gear teeth
534
The prices listed are suggested retail prices (valid until 31st May 2012). Inch products and combined inch/metric products are generally intended
for sale to the United Kingdom only. All products are intended to be sold to commercial customers. Therefore VAT is not included.
* Please contact Mitutoyo for more information on delivery times.
Overlay Chart Set
Group 2 - Makes inspection of projected images an easy process.
Optional accessories
No.
932105
Description
Overlay chart set (12 sheets)
(No. 512066 to 512077)
512066
512068
512067
Metric
Description
Concentric circles 1 mm pitch
Concentric circles at 1 mm pitch with radial index 1°
increments
Crossed lines with 0,5 mm pitch
Crossed lines with 1 mm graduation and concentric circles
5 mm pitch
Grid chart (1 mm pitch)
Grid chart (10 x 10 mm)
Horizontal for 20X, vertical for 50X with 1 mm graduations
Horizontal lines 1 mm pitch
Metric threads 0,075 - 0,225 mm, 100X involute gear
teeth : 20° MOD 0.2-1, 14,5° MOD 0.2-1
Metric threads 0,2-2 mm, unified threads 28-12 TPI 20X
Whitworth threads 20-10 TPI 20X
Radial index 1° increments
Radial index 1° increments (upper) concentric circle 1 mm
pitch (lower)
ø 250 mm ø 300 mm ø 350 mm ø 500 mm ø 600 mm
No.
No.
No.
No.
No.
999309UK 512068
999310UK 999311UK 999312UK
999337UK 512075
999338UK 999339UK 999340UK
999321UK 512071
999305UK 512067*
999322UK 999323UK 999324UK
999306UK 999307UK 999308UK
999325UK
999317UK
999313UK
999333UK
999345UK
999326UK
999318UK
999314UK
999334UK
999346UK
512072
512070*
512069*
512074*
512077*
999327UK
999319UK
999315UK
999335UK
999347UK
999328UK
999320UK
999316UK
999336UK
999348UK
999341UK 512076
999342UK 999343UK 999344UK
999329UK 512073*
999301UK 512066
999330UK 999331UK 999332UK
999302UK 999303UK 999304UK
512069
Inch
Description
512070
512071
512072
512073
512074
512075
512076
512077
Concentric circles 0.5" pitch
Concentric circles at 0.05" pitch with radial index 1°
increments
Crossed lines with 0.05" graduation and concentric circles
0.25" pitch
Crossed lines with 0.25" pitch
Grid chart (0.05" pitch)
Grid chart (10 x 0.5")
Horizontal for 20X, vertical for 50X with 0.05" graduation
Horizontal lines 0.05" pitch
Radial index 1° increments (upper) concentric circle 0.05"
pitch (lower)
The prices listed are suggested retail prices (valid until 31st May 2012). Inch products and combined inch/metric products are generally intended
for sale to the United Kingdom only. All products are intended to be sold to commercial customers. Therefore VAT is not included.
* Please contact Mitutoyo for more information on delivery times.
535
ø 10"
ø 12"
ø 14"
ø 20"
ø 24"
No.
No.
No.
No.
No.
999359UK 999360UK 999361UK 999362UK 999363UK
999389UK 999390UK 999391UK 999392UK 999393UK
999354UK 999355UK 999356UK 999357UK 999358UK
999374UK
999379UK
999369UK
999364UK
999384UK
999349UK
999375UK
999380UK
999370UK
999365UK
999385UK
999350UK
999376UK
999381UK
999371UK
999366UK
999386UK
999351UK
999377UK
999382UK
999372UK
999367UK
999387UK
999352UK
999378UK
999383UK
999373UK
999368UK
999388UK
999353UK
Workpiece Fixtures
For Profile Projectors and Measuring Microscopes
Vertical Holder
No.
Mass (kg)
172-132
1.3
172-132
Centre Support
No.
Max. workpiece height Mass (kg)
172-142
120 mm
3.3
172-142
Centre Support Riser
No.
Max. workpiece height Mass (kg)
172-143
240 mm
3.3
172-143
Rotary Vice
No.
Max. workpiece height Rotary range Width of jaws Angle graduations Mass (kg)
172-144
60 mm
360°
40 mm
5°
2.8
172-144
Swivel Centre Support
No.
Max workpiece dia.
Max. workpiece length Swivel range Mass (kg)
70 mm
176-105
140 mm
±10°
2.4
(45 mm) when swiveled 10°
80 mm
172-197
140 mm
±10°
2.5
(65 mm) when swiveled 10°
172-197
Rotary Tables
No.
Effective glass dia. Angular resolution
176-106
66 mm
6°
172-198
96 mm
1°
172-196
100 mm
1°
176-305
182 mm
176-306
238 mm
Fine feed Mass (kg)
1.7
Available
2.4
2.5
Available
5.5
Available
6.5
176-106
V-Block with Clamp
No.
Max workpiece dia. Width of block Mass (kg)
172-378
25 mm
41 mm
0.8
172-234
50 mm
60 mm
1.24
Holder with Clamp
No.
Max. workpiece height Mass (kg)
176-107
35 mm
0.42
172-198
172-234 - 172-378
176-107
536
The prices listed are suggested retail prices (valid until 31st May 2012). Inch products and combined inch/metric products are generally intended
for sale to the United Kingdom only. All products are intended to be sold to commercial customers. Therefore VAT is not included.
* Please contact Mitutoyo for more information on delivery times.
Measurement table
Measurement table dimensions
(1)
ø
(2)
(3)
176-206 for TM-505
(1)
depth
(2)
hole
(3)
detailed drawing of T slot
(3)
(2)
(1)
176-207 for TM-510
(1)
depth
319-225-1 for PJ-A3000
For Measuring
Instrument
No.
Adjustment range
Measurement table
dimensions
Glass plate dimensions
Glass plate order no.
Measuring methods
Installation diameter
Table height
Bore pattern for table
installation
T-slot distance
Max. stage loading
Mass (kg)
(1)
(2)
hole
(3)
depth
TM-505
TM-510
PJ-A3010F-200
PV-5110
176-206
50 x 50 mm
176-207*
100 x 50 mm
319-225-1
200 x 100 mm
12AAF177
200 x 100 mm
152 x 152 mm
240 x 152 mm
380 x 250 mm
380 x 250 mm
96 x 96 mm
380405
Integral micrometer
(optional)
18 mm
44.5 mm
154 x 96 mm
380495
Integral micrometer
(optional)
18 mm
52.5 mm
100 x 70 mm
120 mm
5 kg
2.72
The prices listed are suggested retail prices (valid until 31st May 2012). Inch products and combined inch/metric products are generally intended
for sale to the United Kingdom only. All products are intended to be sold to commercial customers. Therefore VAT is not included.
* Please contact Mitutoyo for more information on delivery times.
detailed drawing of T slot
537
280 x 180 x 6 mm 280 x 180 x 6 mm
382762
382762
Linear encoder
Linear encoder
75 mm
75 mm
100 x 70 mm
210 x 140 mm
210 x 140 mm
120 mm
5 kg
4.17
8 kg
18.5
5 kg
18.5
Download PDF
Similar pages