F-1000 Series Wide-Dispersion Speakers

F-1000 Series
Wide-Dispersion Speakers
F-1000B/BT/BTWP
F-1000W/WT/WTWP
DESCRIPTION
The TOA F-1000 Series comprise a two-way speaker line of compact units offering wide frequency response and higher, more
powerful performance. These highly adaptable speaker systems are intended to meet the requirements of a wide range of venues
and applications, both indoors and outdoors.
For clear, wide-area sound coverage, the Series include wide dispersion-angle (90° x 90°) high-frequency horn (Octagonal Horn).
High-impedance and low-impedance models are available. Low impedance models come with separate HF and LF protection
circuitry. High impedance models have a rear-panel rotary control for making impedance settings that optimally match amplifier
and speaker performance.
The speaker units have a design that combines stylishness and a high degree of performance-enhancing rigidity. Even the decorenhancing convex bulge on the side of the casing serves to improve rigidity. Brackets for easy speaker-stand, wall and ceiling
installation are included, and there are also optionally available brackets for more challenging installation venues and sound
reinforcement applications. Push-in terminals make connections quick and easy, and there are models for outdoor use that meet
IPX4 splash-proof standards.
FEATURES
• 90° x 90° dispersion angle high-frequency horns (Octagonal Horn) ensure an enhanced sound coverage area and a more even
balanced tone.
• Splash-proof design with anticorrosive punching net and terminal cover, meeting IPX4 splash-proof ratings, available on models
F-1000BTWP/WTWP.
• All speaker models are repaintable.
• Low impedance models have high and low frequency filter and protection circuitry.
• Included accessory brackets allow a wide choice of installations on walls, ceilings and speaker stands.
• Optionally available brackets meet an even wider variety of installation demands.
• Stylish and highly rigid casing design for attractive installation with clearer sound reproduction.
• Sensitivity: 87dB (1W, 1m)
TOA Corporation F-1000 1/4
APPEARANCE AND DIMENSIONAL DIAGRAM
130 (5.12")
TERMINAL COVER USE (F-1000BTWP/WTWP only)
2–M5 (depth 14 (0.55"))
(for bracket mounting)
30 (1.18")
131 (5.16")
Input terminal
Tapping screw 4 x 12 (accessory)
202 (7.95")
30 (1.18")
Terminal cover (accessory)
Speaker cable
.1")
28 (1
.18")
30 (1
Front View
[Stripped conductor]
10mm
Bushing*
30mm
* Screwed onto the Terminal cover at the factory.
Rotally switch
Side View
Rear View (F-1000BT/WT/
2–M5 (depth 14 (0.55"))*
(for bracket mounting)
BTWP/WTWP only)
Notes
• For the speaker cable, use a cable with a diameter of 6 – 10 mm, which will fit the cable
bushing.
• To ensure waterproof capabilities, firmly mount the terminal cover to the speaker and
tighten the bushing on the cover.
*Hole plugs are pre-fitted into
the holes at the factory.
Before attaching the speaker
mounting bracket to this side,
remove them using a pointed
tool.
Bottom View
CHARACTERISTIC DIAGRAMS
Polar Response
0°
10
330°
0
30°
-10
60°
-10
300°
-20
60°
-30
-40
-40
270°
90°
270°
90°
-40
240°
-40
-40
270°
270°
90°
-40
-30
-30
-20
120°
240°
-20
120°
-10
-10
0
0
240°
150°
500Hz
400Hz
315Hz
240°
10
180°
150°
0°
10
330°
0
30°
-10
300°
60°
330°
0
30°
300°
60°
-40
240°
60°
270°
90°
-40
-30
240°
-20
120°
-10
-10
-10
-10
0
0
0
0
150°
240°
10
180°
150°
150°
4000Hz
3150Hz
2500Hz
330°
0
30°
60°
300°
-20
330°
0
30°
300°
60°
270°
240°
60°
270°
90°
-40
-30
240°
-20
120°
-10
-10
-10
-10
0
0
0
0
150°
150°
240°
10
180°
240°
10
180°
8000Hz
6300Hz
5000Hz
SPL vs. Frequency
150°
Phase vs. Frequency
100
150°
240°
240°
10
180°
8000Hz
6300Hz
5000Hz
16000Hz
12500Hz
10000Hz
Beamwidth vs. Frequency
180
110
240°
10
180°
16000Hz
12500Hz
10000Hz
300°
-40
-20
120°
330°
-30
-30
240°
0
-20
-40
-20
120°
300°
270°
-30
-20
4000Hz
3150Hz
2500Hz
-10
90°
-40
-30
30°
-40
270°
90°
-40
330°
0
-30
-40
-40
90°
240°
0°
10
-20
-30
240°
10
180°
-10
-20
-30
150°
2000Hz
1600Hz
1250Hz
0°
10
-10
-10
240°
10
180°
0°
10
0°
10
30°
240°
10
180°
2000Hz
1600Hz
1250Hz
300°
-40
-20
120°
330°
-30
-30
240°
0
-20
-40
-20
120°
300°
270°
-30
-20
1000Hz
800Hz
630Hz
-10
90°
-40
-30
30°
-40
270°
90°
-40
330°
0
-30
-40
270°
90°
240°
0°
10
-20
-30
240°
10
180°
-10
-20
-30
150°
500Hz
400Hz
315Hz
0°
10
-10
-20
240°
10
180°
1000Hz
800Hz
630Hz
300°
-30
90°
240°
330°
-20
0
30°
80
70
200
0
-90
60
-180
20
50
40
50
100
500
1k
Frequency (Hz)
5k
10k
20k
Beamwidth (deg)
Phase (deg)
90
90
100
50
Impedance vs. Frequency
50
100
500
1k
5k
10k
200
20k
Frequency (Hz)
10
100
Impedance (ohm)
SPL (dB)
60°
-30
0
0°
10
30
20
300°
-20
-10
10
180°
120°
60°
0
-10
-10
150°
60°
30°
-40
-20
120°
0°
10
330°
0
-10
-30
-20
120°
30°
-40
-30
60°
300°
-20
-30
120°
330°
0
0°
10
vertical
horizontal
0°
10
30°
20
50
100
500
1k
Frequency (Hz)
50
5k
10k
20k
Hor.
Ver.
10
5
1
20
50
100
500
1k
Frequency (Hz)
5k
10k
20k
TOA Corporation F-1000 2/4
SPECIFICATIONS
Model No.
Enclosure Type
Power Handling Capacity
F-1000B
Rated Input
Rated Impedance
15 W
8Ω
100V line: 670Ω (15W), 2 kΩ (5W), 3.3 kΩ (3W), 10 kΩ (1W)
100V line: 670Ω (15W), 2 kΩ (5W), 3.3 kΩ (3W), 10 kΩ (1W)
70V line: 330Ω (15W), 670Ω (7.5W), 2 kΩ (2.5W), 3.3 kΩ (1.5W), 70V line: 330Ω (15W), 670Ω (7.5W), 2 kΩ (2.5W), 3.3 kΩ (1.5W),
10 kΩ (0.5W)
10 kΩ (0.5W)
87 dB (1W, 1m) at installation in 1/2 free sound field
85 – 20,000 Hz, -10 dB at installation in 1/2 free sound field
5kHz
Horizontal: 90º, Vertical: 90º
Low frequency: 10 cm (4") cone-type
High frequency: Balanced dome tweeter
Push-in terminal
—
IPX4
—
–10°C to +50°C (14°F to 122°F)
Enclosure: HIPS resin, black
Enclosure: HIPS resin, white
Enclosure: HIPS resin, black
Enclosure: HIPS resin, white
Enclosure: HIPS resin, black
Enclosure: HIPS resin, white
Punched net: Surface-treated
Punched net: Surface-treated
Punched net: Surface-treated
Punched net: Surface-treated
Punched net: Surface-treated
Punched net: Surface-treated
steel plate, black, paint
steel plate, white, paint
steel plate, black, paint
steel plate, white, paint
steel plate, black, anticorrosive paint steel plate, white, anticorrosive paint
Joint bracket, wall bracket:
Joint bracket, wall bracket:
Joint bracket, wall bracket:
Joint bracket, wall bracket:
Joint bracket, wall bracket:
Joint bracket, wall bracket:
Steel plate, t1.6, black, paint
Steel plate, t1.6, white paint
Steel plate, t1.6, black, paint
Steel plate, t1.6, white, paint
Stainless steel (SUS304), t1.5
Stainless steel (SUS304), t1.5
Speaker bracket: Die-cast
Speaker bracket: Die-cast
Speaker bracket: Die-cast
Speaker bracket: Die-cast
Speaker bracket: Die-cast
Speaker bracket: Die-cast
aluminum, black, paint
aluminum, white, paint
aluminum, black, paint
aluminum, white, paint
aluminum, black, paint
aluminum, white, paint
130 (W) × 202 (H) × 131 (D) mm (5.12" × 7.95" × 5.16")
1.8 kg (3.97 lb) (including the supplied brackets)
2 kg (4.41lb) (including the supplied brackets)
Speaker bracket × 1, Joint bracket × 1, Wall bracket × 1, Bracket fixing screw × 1 set
Speaker bracket × 1, Joint bracket × 1, Wall bracket × 1,
Bracket fixing screw × 1 set, Terminal cover × 1,
Terminal cover mounting screw × 4
Board hanger bracket: HY-BH10B Board hanger bracket: HY-BH10B Board hanger bracket: HY-BH10B Board hanger bracket: HY-BH10B
Speaker mount bracket: YS-60B
Ceiling mount bracket: HY-CM10B Ceiling mount bracket: HY-CM10W Ceiling mount bracket: HY-CM10B Ceiling mount bracket: HY-CM10W
Cluster bracket: HY-CL10B
Cluster bracket: HY-CL10B
Cluster bracket: HY-CL10B
Cluster bracket: HY-CL10B
Speaker stand: ST-16A
Speaker stand: ST-16A
Speaker stand: ST-16A
Speaker stand: ST-16A
HB-1, FB-10, FB-100
Sensitivity
Frequency Response
Crossover Frequency
Directivity Angle
Speaker Component
Input Terminal
Water Protection
Operating Temperature
Finish
Dimensions
Weight
Accessories
Options
Recommended Subwoofer
F-1000W
F-1000BT
Bass-reflex type
F-1000WT
30 W (continuous pink noise)
90 W (continuous program)
—
8Ω
F-1000BTWP*
F-1000WTWP*
—
* Note: Do not install the speaker at places where it is likely to be corroded such as bathroom, indoor pools or seaside.
ARCHITECTURAL AND ENGINEERING SPECIFICATIONS
F-1000B / F-1000W
F-1000BT / F-1000WT
F-1000BTWP / F-1000WTWP
The speaker shall be a two-way bass reflex enclosure
suitable for ceiling or wall mounting. The low frequency
component shall be a 10 cm (4") cone-type woofer. The
high frequency component shall be a balanced dome
tweeter. For clear, wide-area sound coverage, the
speaker shall 90° (H) x 90° (V) wide dispersion-angle
high frequency horn.
The speaker shall come with separate HF and LF
protection circuitry.
The speaker shall be rated at 8 ohms. The sensitivity at
a distance of 1m with a 1 W input level applied shall be
87 dB. The rated power handling shall be 30 W
continuous pink noise and 90 W continuous program.
The speaker shall have a frequency response of 85 –
20kHz.
The speaker enclosure shall be constructed of HIPS
resin. The speaker shall be available in white or black,
and also be repaintable. The grille shall be a punched
net, surface-treated steel plate. Brackets for speakerstand, wall and ceiling installation shall be included.
There shall be also optionally available brackets for
more demanding installations.
The unit shall be compact and lightweight with
dimensions of 130 x 202 x 131 mm (5.12" x 7.95" x
5.16") and a weight of 1.8 kg (3.97 lbs).
The speaker shall be a TOA model F-1000B/F-1000W.
The board hanger bracket shall be the HY-BH10B.
The ceiling mount bracket shall be the HY-CM10B/
HY-CM10W.
The cluster bracket shall be the HY-CL10B.
The subwoofer shall be the HB-1, FB-100 or FB-10.
The speaker shall be a two-way bass reflex enclosure
suitable for ceiling or wall mounting. The low frequency
component shall be a10 cm (4") cone-type woofer. The
high frequency component shall be a balanced dome
tweeter. For clear, wide-area sound coverage, the
speaker shall 90° (H) x 90° (V) wide dispersion-angle
high frequency horn.
The rated input shall be 15 W. The speaker shall
include a transformer having multiple taps (8Ω, 1 W,
3 W, 5 W, 15 W at 100 V and 0.5 W, 1.5 W, 2.5 W, 7.5 W,
15 W at 70 V) adjustable via the rear of the enclosure.
The sensitivity at a distance of 1m with a 1 W input
level applied shall be 87 dB. The speaker shall have a
frequency response of 85 – 20kHz.
The speaker enclosure shall be constructed of HIPS
resin. The speaker shall be available in white or black,
and also be repaintable. The grille shall be a punched
net, surface-treated steel plate. Brackets for speakerstand, wall and ceiling installation shall be included.
There shall be also optionally available brackets for
more demanding installations.
The unit shall be compact and lightweight with
dimensions of 130 x 202 x 131 mm (5.12" x 7.95" x
5.16") and a weight of 1.8 kg (3.97 lbs).
The speaker shall be a TOA model F-1000BT/
F-1000WT.
The board hanger bracket shall be the HY-BH10B.
The ceiling mount bracket shall be the HY-CM10B/
HY-CM10W.
The cluster bracket shall be the HY-CL10B.
The subwoofer shall be the HB-1, FB-100 or FB-10.
The speaker shall be a two-way bass reflex enclosure
suitable for ceiling or wall mounting.
The low
frequency component shall be a 10 cm (4") cone-type
woofer. The high frequency component shall be a
balanced dome tweeter. For clear, wide-area sound
coverage, the speaker shall 90° (H) x 90° (V) wide
dispersion-angle high frequency horn.
The rated input shall be 15 W. The speaker shall
include a transformer having multiple taps (1 W, 3 W, 5
W, 15 W at 100 V and 0.5 W, 1.5 W, 2.5 W, 7.5 W, 15 W
at 70 V) adjustable via the rear of the enclosure. The
sensitivity at a distance of 1m with a 1 W input level
applied shall be 87 dB. The speaker shall have a
frequency response of 85 – 20kHz.
The speaker enclosure shall be constructed of HIPS
resin. The speaker shall have a IEC 529 splash-proof
rating of IPX4. The speaker shall have an operating
temperature of -10° C to +50° C (14° F to 122° F). The
speaker shall be available in white or black, and also
be repaintable. The grille shall be a punched net,
surface-treated steel plate with anticorrosive paint.
Brackets for speaker-stand, wall and ceiling installation
shall be included.
There shall be also optionally available brackets for
more demanding installations.
The unit shall be compact and lightweight with
dimensions of 130 x 202 x 131 mm (5.12" x 7.95" x
5.16") and a weight of 2 kg ( 4.41 lbs).
The speaker shall be a TOA model F-1000BTWP/
F-1000WTWP.
The pole mount brackets shall be the YS-60B.
The subwoofer shall be the HB-1, FB-100 or FB-10.
TOA Corporation F-1000 3/4
WALL BRACKET AND JOINT BRACKET MOUNTING (ACCESSORY BRACKETS)
Wall bracket mounting
Joint bracket mounting
Hexagon bolt M6 x 12
(with plain washer
and spring washer)
Vertical installation
Horizontal: Max. 82°,
Vertical: Max. 45° downward
Vertical speaker
mounting
Wall bracket
Horizontal installation
Horizontal: Max. 60°,
Vertical: Max. 45° downward
4-ø6mm
25mm
Joint bracket
Joint bracket
30mm
Fixing bolt
M5 x 60
Fixing bolt M5 x 60
Ceiling
mounting
Speaker bracket
30mm
4-ø6m
30mm
OPTIONAL BRACKETS
CEILING MOUNT BRACKET
CLUSTER BRACKET
for indoor use
for indoor use
HY-CL10B
HY-CM10B/W
• Finish:
Steel plate, black, paint
• Dimensions: 109.3 (W) × 39 (H) × 109.3 (D)mm (4.3" × 1.54" × 4.3")
• Weight:
380g (0.84 lb)
• Finish:
Steel plate, black, paint (HY-CM10W: white, paint)
• Dimensions: 48 (W) × 100 (H) × 108 (D)mm (1.89" × 3.94" × 4.25")
• Weight:
210g (0.46 lb)
9.8 X 41.8
Top View
68 (2.68")
(0.39" X 1.65")
.25")
6.4 (0
30°
15°
68 (2.68")
109 (4.3")
45 (1.77")
ø70 (ø2.76")
108 (4.25")
48 (1.89")
ø9.8 (ø0.39")
4–M5
25
(0.98")
39
(1.54")
25
(0.98")
Front View
20 (0.79")
16–M5
30
(1.18")
100 (3.94")
Top View
8–ø5.8 (ø0.23")
(suspension hole)
ø9.8 (ø0.39")
Side View
3 (0.12")
109 (4.3")
30
(1.18")
Front View
BOARD HANGER BRACKET
POLE MOUNT BRACKET
for indoor use
HY-BH10B
Front View
Side View
[Hanger bracket]
14 (0.55")
17
(0.67")
A'
11 (0.43")
1.2 (0.05")
25 (0.98")
19
(0.75")
10
(0.39")
22
(0.87")
48 (1.89")
ø9.8 (ø0.39")
5 (0.2")
4–M5
51 (2.01")
48.6 (1.91")
30 (1.18")
1.2 (0.05")
[Knob bolt]
A
ø4 (ø0.16")*
(sliding bracket
fixing screw)
34.2 (1.35")
3 (0.12")
100 (3.94")
20 (0.79")
25 (0.98")
30
(1.18")
Front View
Top View
40 (1.57")
2–M8
12 (0.47")
25 (0.98")
A – A'
1200 (47.24")
110 (4
.33")
60 (2.3
6")
37
(1.46
")
32 (1.26") 29 (1.14")
108 (4.25")
48 (1.89")
Applicable Pole:
Approx. ø90 (ø3.5") to ø340 (ø13.4") mm
Finish:
Electroless zinc-plated
Weight:
360g (0.79lb.) (per band)
Product Composition: Mounting band x 2
31 (1
.22")
Top View
•
•
•
•
M10
.97")
(ø1
ø50
YS-60B
15 (0.59")
9.8 (0.39")
• Finish:
Steel plate, black, paint
• Dimensions: 48 (W) × 100 (H) × 108 (D)mm (1.89" × 3.94" × 4.25")
(excluding knob bolt)
• Weight:
210g (0.46 lb)
Side View
[Sliding bracket]
TOA Corporation
www.toa.jp
Specifications are subject to change without notice.
(1106) 833-61-657-7A u
TOA Corporation F-1000 4/4
Dovoz, distribuce a prodej v ČR:
AUDIO DIGITAL s.r.o.
www.audiodigital.cz
Download PDF
Similar pages