Axis High Power over Ethernet midspans &

DATASHEET
Axis High Power over Ethernet midspans & splitters
High Power over Ethernet for Axis PTZ dome network cameras.
> Reduced installation
costs
> Support for Axis
PTZ dome network
cameras
> IEEE 802.3at
> IEEE 802.3af
compliance
Axis High Power over Ethernet midspans and splitters offer an easy, fast and cost-effective
solution for powering network video products — specifically PTZ dome network cameras —
without the need to install power outlets and electrical cabling.
Axis High Power over Ethernet (High PoE) midspans and
splitters enable Axis network video products to receive
data and power over the same Ethernet cable.
The High PoE products make it easier to install network
video products in areas where power cabling and outlets
are unavailable, thereby reducing installation costs.
These midspans and splitters are used to power network
devices that require more power, as specified by the IEEE
802.3at standard. The midspans are also IEEE 802.3af
compliant, meaning that they can be used with all Axis
network video products with built-in PoE support.
The function of a midspan is to inject power into a
network cable. A splitter, which separates data and power
coming over an Ethernet cable, is used for a network
video product without built-in support for PoE.
Technical Specifications – Axis High Power over Ethernet midspans
Midspan
Model
Function
Data rate
AXIS T8122 DC 30 W Midspan
AXIS T8123 High PoE 30 W Midspan 1-port
AXIS T8124 High PoE 60 W Midspan 1-port
Data and power are fed to a network video product through
an Ethernet cable; use together with a High PoE splitter for a
network video product without built-in PoE support
10/100/1000 Mbps
Data & Power
Connectors
Shielded RJ-45, EIA 568A and 568B
Network cables
Shielded category 5 (or higher)
Wiring
Data provided over pairs 1/2 and 3/6 for 10/100 Ethernet, over
all four pairs for Gigabit Ethernet
Power over spare pairs 4/5 (+) and 7/8 (-)
AXIS T8124: Power over pairs 1/2(-), 3/6(+), 4/5 (+) and 7/8 (-)
AXIS T8122: 52 V DC at 12-24 V DC IN (max. 30 W)
44-57 V DC at 45-57 V DC IN (max. 30 W)
AXIS T8123: 55 V DC (max. 30 W)
AXIS T8124: 55 V DC (max. 60 W)
AXIS T8122: 12 to 24 V DC (max. 40 W) or 45 to 57 V DC*
(max. 35 W)
AXIS T8123: AC Input Voltage: 100 to 240 V AC (max. 37 W)
AC Frequency: 50 - 60 Hz
AXIS T8124: AC Input Voltage: 100 to 240 V AC (max. 74 W)
AC Frequency: 50 - 60 Hz
Plug-and-play installation; automatically detects PoE and High
PoE-enabled devices and supplies inline power
Local LED management display
Output power
Input power
Installation and
management
AXIS T8122 DC 30 W Midspan - Maximum cable length between
network switch and powered device
General
Display and
indicators
Compliance
Port interfaces are located on the front panel
AXIS T8122: Power indicator: AC power
Network indicator: Port
AXIS T8123 and AXIS T8124: System indicator: AC power
Channel indicator: Power
For more information, see www.axis.com/techsup
IEEE 802.3af, IEEE 802.3at, RoHS, WEEE, CE
Mounting
Wall or shelf mounting
Approvals
FCC Part 15, Class B with FTP cabling
EN 55022 Class B (Emissions), EN 55024 (Immunity), VCCl
Safety: CB, UL/cUL per EN 60950-1, GS Mark per EN 60950-1,
KCC, UL-AR
AXIS T8122: IEC 60068-2-6, IEC 60068-2-27
Humidity max. 95% RH (non-condensing)
AXIS T8122: -20 °C to 65 °C (-4 °F to 149 °F)
AXIS T8123: -10 °C to 55 °C (14 °F to 131 °F)
AXIS T8124: -10 °C to 45 ºC (14 °F to 113 ºF) at 60 W
-10 °C to 55 ºC (14 °F to 131 ºF) at 30 W
-10 ºC to 60 ºC (14 ºF to 140 ºF) at 25 W or less
AXIS T8122: -40˚C to 74˚C (-40˚F to 165˚F)
Operating
conditions
Storage
Dimensions
(HxWxD) and
weight
Included
accessories
AXIS T8122: 117 x 95 x 41 mm (4.6” x 3.7” x 1.6”)
AXIS T8123 and AXIS T8124: 51.3 x 87.9 x 166 mm
(2.0” x 3.46” x 6.53”)
AXIS T8122: 200 g (0.4 lb.)
AXIS T8123: 350 g (0.7 lb.)
AXIS T8124: 400 g (0.8 lb.)
AXIS T8122: DC input terminal connectors
*To power units compliant with IEEE 802.3at, AXIS T8122 requires 50 to 57 V DC IN;
whilst to power units compliant with IEEE 802.3af, AXIS T8122 requires 45 to 57 V DC IN
110
More information is available at www.axis.com and on
products’ Installation Guide
Maximum cable length (m)
100
90
80
70
60
50
Max cable length between network switch and powered device in meters.
Cat5e/6,
Cat5
40
30
20
44
46
48
50
52
Input voltage (Vin)
54
56
58
Technical Specifications – Axis High Power over Ethernet splitters
Splitters
Models
Function
Data & Power
Connectors
AXIS T8126 High PoE Splitter 12V
AXIS T8128 High PoE Splitter 24V
Separate data and power coming over a network cable for a
network video product without built-in PoE support
Input power
Data & power in: Shielded RJ-45
Data out: Shielded RJ-45
Power out: DC barrel connector; with ‘+’ centered
AXIS T8126: 2 A at 12 V DC
AXIS T8128: 1 A at 24 V DC
max. 30 W
Installation
Plug-and-play installation between midspan and camera
Output current
General
Compliance
Operating
conditions
Approvals
Dimensions
(HxWxD) and
weight
Included
accessories
WEEE, CE
0 °C to 40 °C (32 °F to 104 °F)
Humidity max. 90% RH (non-condensing)
FCC Part 15 Class A FTP, Class A UTP
EN55022 (CISPR 22) Class A
Immunity EN55024 (CISPR 24)
94 x 31 x 73 mm (3.7” x 1.12” x 2.87”)
112 g (0.247 lb.)
AXIS T8126 – cable adapters for AXIS 214 PTZ, AXIS 215 PTZ,
video encoders
AXIS T8128 – cable adapter for AXIS 232D+, AXIS 233D
For a complete list of supported products, please refer to
www.axis.com/products/pol/high_poe/supported.htm
©2011 Axis Communications AB. AXIS COMMUNICATIONS, AXIS, ETRAX, ARTPEC and VAPIX are registered trademarks or trademark applications of Axis AB
in various jurisdictions. All other company names and products are trademarks or registered trademarks of their respective companies. We reserve the right
to introduce modifications without notice.
43969/EN/R2/1109
www.axis.com
Download PDF
Similar pages