Video Projector - Projector Central

4-725-444-01 (1)
Video Projector
Operating Instructions
Before operating the unit, please read this manual and supplied Quick
Reference Manual thoroughly and retain them for future reference.
VPL-VW285ES
Table of Contents
Location of Controls
Using Network Features
Front/Right Side ................................ 3
Rear/Left Side/Bottom ...................... 4
Remote Control ................................. 5
Displaying the Control Window of the
Unit with a Web Browser ............. 38
Operating the Control Window ........ 39
Switching the Page .....................39
Setting the Access Limitation ....39
Confirming the Information
Regarding the Unit .................. 40
Connections and
Preparations
Installing the Unit .............................. 6
Adjusting the Picture Position ........... 7
Connecting to Video Equipment or a
Computer ...................................... 11
Error Handling
Troubleshooting ............................... 41
Warning Indicators ...........................44
Message Lists ................................... 45
Projecting
Projecting the Picture ...................... 13
Turning Off the Power ............... 13
Watching 3D Video Images ............. 14
Using the 3D Glasses ................. 14
Selecting the Aspect Ratio According to
the Video Signal ........................... 16
Selecting the Picture Viewing
Mode ............................................ 19
Others
Updating the Software .....................46
About HDR (high dynamic range) ... 46
About the simulated 3D feature ....... 46
NOTICES AND LICENSES FOR
SOFTWARE USED IN THIS
PRODUCT .................................... 46
Replacing the Lamp ......................... 47
Cleaning ........................................... 50
Specifications ................................... 51
Preset Signals ............................. 52
Input Signals and Adjustable/
Setting Items ...........................54
Compatible 3D Signals ............... 55
3D Signals and Adjustable/Setting
Items ........................................ 55
Aspect Mode .............................. 57
Motionflow ................................. 58
Storage Conditions of Adjustable/
Setting Items ...........................58
Projection Distance and Lens Shift
Range ............................................60
Dimensions ......................................64
Index .................................................68
Using the Menus
Operation through the Menus .......... 20
Picture Menu ................................... 22
Screen Menu .................................... 27
Setup Menu ...................................... 29
Function Menu ................................ 31
Items Locked by Settings
Lock ........................................ 33
Installation Menu ............................. 34
Information Menu ............................ 37
About the Preset Memory .......... 37
2
Location of Controls
Front/Right Side
Warning indicators
Warning indicators
Others
a ON/STANDBY indicator
(page 44)
i Lamp cover (page 47)
j Ventilation holes (exhaust)
b WARNING indicator (page 44)
k Ventilation holes (intake)
(page 49)
Connectors
l Remote control detector
(page 7)
c LAN connector (page 38)
d USB connector (page 46)
e HDMI 1/HDMI 2 connector
(page 11)
f REMOTE connector
Connects to a computer, etc. for remote
control.
g IR IN connector
Inputs signals to control the unit.
h TRIGGER 1/TRIGGER 2
connector (page 34)
3
Rear/Left Side/Bottom
The buttons on the control panel have the same names as those on the remote control.
Control panel
Control panel
Others
a ?/1 (ON/STANDBY) button
(page 7)
f Remote control detector
(page 7)
b INPUT button (page 13)
g Ventilation holes (intake)
(page 49)
c MENU button (page 20)
d M/m/</, (arrow)/
button (page 20)
h AC IN socket (page 7)
(enter)
i Projector suspension support
attaching hole (page 65)
e LENS button (page 7)
j Front feet (adjustable) (page 10)
4
a LIGHT button
Remote Control
Illuminates the buttons on the remote
control.
b Infrared transmitter
c ?/1 (ON/STANDBY) button
(page 7)
d INPUT button (page 13)
e CALIBRATED PRESET buttons
(page 19)
f PATTERN button (page 8)
g RESET button (page 21)
h M/m/</, (arrow)/
buttons (page 20)
(enter)
i MENU button (page 20)
j MOTIONFLOW button (page 23)
k ASPECT button (page 16)
l COLOR SPACE button (page 26)
m COLOR TEMP button (page 24)
n GAMMA CORRECTION button
(page 25)
o 3D button (page 14)
p COLOR CORRECTION button
(page 25)
q REALITY CREATION button
(page 23)
r CONTRAST ENHANCER button
(page 23)
s SHARPNESS +/– button
(page 24)
t CONTRAST +/– button (page 23)
u BRIGHTNESS +/– button
(page 24)
5
Connections and Preparations
Note
Installing the Unit
When using a screen with an uneven surface,
stripes pattern may rarely appear on the screen
depending on the distance between the screen
and the unit or the zooming magnifications.
This is not a malfunction of the unit.
The installation distance between the unit
and a screen varies depending on the size of
the screen or whether or not you use the lens
shift features. Install this unit so that it fits
the size of your screen. For details on the
distance between the unit and the screen (the
projection distance) and the size of projected
video, see “Projection Distance and Lens
Shift Range” (page 60).
1
Position the unit so that the lens is
parallel to the screen.
Top view
Screen
2
Project an image on the screen and
adjust the picture so that it fits the
screen (page 7).
6
Note
Adjusting the Picture
Position
Depending on the installation location of the
unit, you may not be able to control it with the
remote control. In this case, point the remote
control at the remote control detector of the
unit or the screen.
Project an image on the screen and then
adjust the picture position.
1
After connecting the AC power cord to
the unit, plug the AC power cord into
a wall outlet.
The ON/STANDBY indicator lights in
red and the unit goes into standby mode.
Remote control
detector
Lights in red.
2
Press the ?/1 (ON/STANDBY) button
to turn on the unit.
The ON/STANDBY indicator flashes in
green, and then lights in green.
Flashes in green for
tens of seconds and
then lights in green.
Tips
• The ?/1 (ON/STANDBY), INPUT, MENU,
and M/m/</,/
(joystick) buttons on
the side panel of the unit function the same as
those on the remote control. The LENS
button functions in the same way as the
PATTERN button of the remote control.
• When adjusting the lens, each time you press
the LENS button on the unit, the lens
adjustment function switches between “Lens
Focus,” “Lens Zoom” and “Lens Shift.”
7
3
4
Adjust the focus.
Press the PATTERN button repeatedly to
display the Lens Focus adjustment
window (test pattern). Then adjust the
focus of the picture by pressing the M/m/
</, buttons.
Adjust the picture size.
Press the PATTERN button repeatedly to
display the Lens Zoom adjustment
window (test pattern). Then adjust the
size of the picture by pressing the M/m/
</, buttons.
To make the picture larger, press M/,.
To make the picture smaller, press m/
<.
5
Adjust the picture position.
Press the PATTERN button repeatedly to
display the Lens Shift adjustment
window (test pattern). Then adjust to the
proper position of the picture by
pressing the M/m/</, buttons.
Tips
• When “Lens Control” is set to “Off” on the
Installation
menu, you cannot adjust the
lens (FOCUS, ZOOM, or SHIFT) (page 34).
• When “Test Pattern” is set to “Off” on the
Function
menu, the test pattern is not
displayed (page 32).
Note
Adjust the lens by using buttons on the remote
control or the control panel of the unit. Never
make adjustments by directly turning the lens
with your hands, which may cause damage or
malfunction to the unit.
Tip
Whenever you press the
pattern disappears.
button, the test
Note
When adjusting the window position, do not
touch the lens unit, otherwise your fingers may
be pinched by the moving parts.
8
To adjust the horizontal position
To adjust the vertical position
Press </,.
Press M/m.
The picture projected on the screen moves
right or left by a maximum of 31% of the
screen width from the center of the lens.
The picture projected on the screen moves
up by a maximum of 85% or moves down by
a maximum of 80% of the screen height
from the center of the lens.
Top view
Side view
31% 1 screen width 31%
85%
1 screen
height
80%
: Picture position when moving the
picture upward at maximum
: Picture position when moving the
picture downward at maximum
: Picture position when moving the
picture to the left at maximum
: Picture position when moving the
picture to the right at maximum
Note
The range to move the picture projected on the
screen can be adjusted only within the octagon
area illustrated below. For details, see
“Projection Distance and Lens Shift Range”
(page 60).
9
Range of movement of the projected
picture
Lens adjustment window (test
pattern)
1.78:1 (16:9)
0.85V
1.33:1 (4:3)
0.31H
0.31H
Projected Picture
2.35:1
0.8V
H: Width of the projected picture
V: Height of the projected picture
1.85:1
The dashed lines show the screen sizes of each
aspect ratio.
To adjust the tilt of the installation
surface
If the unit is installed on an uneven surface,
use the front feet (adjustable) to keep the unit
level.
Front feet (adjustable)
Turn to
adjust.
Notes
• If the unit is tilted up or down, the projected
image may be trapezoidal.
• Be careful not to catch your finger when
turning the front feet (adjustable).
10
Connecting to Video Equipment or a
Computer
You can enjoy high picture quality by connecting a DVD player/recorder, Blu-ray Disc player/
recorder, or PlayStation® equipped with HDMI output to the HDMI input of the unit.
When making connections, be sure to do the following:
• Turn off all equipment before making any connections.
• Use the proper cables for each connection.
• Insert the cable plugs properly; poor connection at the plugs may cause a malfunction or poor
picture quality. When pulling out a cable, be sure to pull it out from the plug, not the cable
itself.
• Refer to the operating instructions of the connected equipment.
Computer
Right side of the unit
Equipment with HDMI
output connectors
AV amplifier
Speakers
to HDMI output
HDMI cable (not supplied)
: Video signal flow
Use a High Speed HDMI cable or a Premium High Speed
HDMI cable on which the cable type logo is specified.
11
Notes
• Use a High Speed HDMI cable or a Premium High Speed HDMI cable. With a standard HDMI
cable, images of 1080p, DeepColor, 3D video and 4K video may not be displayed properly.
• When connecting an HDMI cable to the unit, make sure the V mark on the upper part of the HDMI
input of the unit and the v mark on the connector of the cable is set at the same position.
• If the picture from equipment connected to the unit with an HDMI cable is not correct, check the
settings of the connected equipment.
• If you set your computer, such as a notebook type, to output the signal to both computer’s display
and this equipment, the picture of the equipment may not appear properly. Set your computer to
output the signal to only the external monitor. For details, refer to the computer’s operating
instructions supplied with your computer. For settings of the computer, consult with the
manufacturer of the computer.
12
Projecting
The fan stops and the ON/STANDBY
indicator changes from flashing green to
remaining red.
Projecting the
Picture
1
2
3
The power is turned off completely, and you
can disconnect the AC power cord.
Turn on both the unit and the
equipment connected to the unit.
Note
Never disconnect the AC power cord while the
indicator is flashing.
Press INPUT to display the input
palette on the screen.
Tip
You can turn off the unit by holding the ?/1
(ON/STANDBY) button for about 1 second,
instead of performing the above steps.
Select the equipment from which you
want to display images.
Press INPUT repeatedly or press M/m/
(enter) to select the equipment from
which to project.
Example: To view the picture from the
video equipment connected to the HDMI
1 connector of this unit.
Tip
When “Status” is set to “Off” on the Setup
menu, the input palette does not appear. Press
the INPUT button to switch between input
terminals in sequence.
Turning Off the Power
1
Press the ?/1 (ON/STANDBY)
button.
A message “POWER OFF?” appears on
the screen.
2
Press the ?/1 (ON/STANDBY) button
again before the message disappears.
The ON/STANDBY indicator flashes in
green and the fan continues to run to
reduce the internal heat.
13
Adjusting/Setting the 3D functions
Watching 3D Video
Images
You can adjust/set the 3D functions by
pressing the 3D button on the remote control
or with the “3D Settings” of the Function
menu. For details, see “3D Settings”
(page 31).
You can enjoy powerful 3D video images,
such as from 3D games and 3D Blu-ray
Discs, using the optional Active 3D Glasses
(TDG-BT500A).
1
Using the 3D Glasses
1
Turn on the HDMI equipment for 3D
compatibility connected to the unit,
then play the 3D content.
For details on how to register the 3D
glasses, refer to the operating
instructions supplied with the 3D
glasses.
For details on how to play 3D content,
refer to the operating instructions for the
connected equipment.
2
Turn on the unit and project the 3D
video image onto the screen.
For details on how to project the image,
see “Projecting the Picture” (page 13).
3
Turn on the 3D glasses, and register
them on the unit.
2
Put on the 3D glasses.
3
Turn toward the screen.
Precautions for use
Misoperation may occur if:
• The viewing position is too far from the
projector
• There are other communication devices,
such as a wireless LAN (IEEE802.11 b/g/
n) or a microwave with a bandwidth of 2.4
GHz, near the unit
Turn on the 3D glasses, and then put
them on so that they fit comfortably.
For details on how to use the 3D glasses,
see “Using the 3D Glasses” (page 14).
Tips
• The factory default setting for ”2D-3D
Display Sel.” is “Auto” to allow projecting
3D video images automatically when the unit
detects 3D signals.
• To convert 3D video images to 2D video
images, set “2D-3D Display Sel.” to “2D”
(page 31).
3D glasses communication range
Figure below indicate the communication
range of the 3D glasses. If you try to watch
3D video images from a distance greater
than the communication range or install the
unit outside the communication range, the
3D glasses may not be able to display the
images properly. Also, the distance varies
depending on the environment of the room
and installation environment of the unit.
Notes
• It may not be possible to display 3D video
image, depending on the type of signal. Set
the “2D-3D Display Sel.” to “3D,” and “3D
Format” to “Side-by-Side” or “Over-Under”
to suit the format of the 3D content you want
to watch (page 31).
• Use the 3D glasses within the
communication range (page 14).
• There are differences in perception of 3D
video images among individuals.
• When the temperature of the usage
environment is low, the 3D effect may be
diminished.
14
Top or side view
Projector
10 m
10 m
10 m
10 m
15
Selecting the Aspect Ratio According to the
Video Signal
You can select an aspect ratio best suited for
the video signal received.
Press ASPECT.
ASPECT
button
Each time you press the button, you can
select the “Aspect” setting.You can also
select it using the menu (page 28).
Original image
Recommended setting and resultant images
1.85:1 Zoom
1.85:1
Squeezed 1.85:1
2.35:1 Zoom
2.35:1
Squeezed 2.35:1
16
Original image
Recommended setting and resultant images
Normal
1.78:1 (16:9)
1.33:1 (4:3)
1.33:1 (4:3) with side panels
V Stretch
2.35:1
When using an anamorphic lens
Squeeze
16:9
When using an anamorphic lens
17
Original image
Recommended setting and resultant images
Stretch
Squeezed
Notes
• Selectable aspect modes vary depending on
the input signal (page 57).
• The aspect cannot be selected for an input
signal from a computer, or an input signal
with a resolution of 4096 × 2160 (page 52).
Notes on switching the “Aspect”
setting
• Select the aspect mode taking into account
that changing the aspect ratio of the
original picture will provide a different
look from that of the original image.
• Note that if the unit is used for profit or for
public viewing, modifying the original
picture by switching the aspect may
constitute an infringement of the rights of
authors or producers, which are legally
protected.
18
Selecting the Picture Viewing Mode
You can select the picture viewing mode that
best suits the type of video source or room
conditions.
You can save and use different preset modes
for 2D/3D respectively.
CALIBRATED
PRESET buttons
Press one of the CALIBRATED PRESET
buttons.
Setting items
Description
CINEMA FILM 1
Picture quality suited to reproducing the highly dynamic and
clear images typical of master positive film.
CINEMA FILM 2
Picture quality suited to reproducing the rich tone and color
typical of a movie theater, based on the Cinema Film 1.
REF
A picture quality setup suitable for when you want to reproduce
faithfully the original image quality, or for enjoying image
quality, without any adjustment.
TV
Picture quality suited for watching TV programs, sports,
concerts, and other video images.
PHOTO
Ideal for projecting still images taken with a digital camera.
GAME
Picture quality suited to gaming, with well-modulated colors
and fast response.
BRT CINE
Picture quality suited for watching movies in a bright
environment, such as a living room.
BRT TV
Picture quality suited for watching TV programs, sports,
concerts, and other video images in a bright environment, such
as a living room.
USER
Adjusts the picture quality to suit your taste then saves the
setting. The factory default setting is the same as “REF.”
19
Using the Menus
Note
The menu displays used for the explanation may be different from the actual menu display.
3
Operation through
the Menus
The setting items are displayed in a popup menu, in a setting menu, in an
adjustment menu or in the next menu
window.
The unit is equipped with an on-screen menu
for making various adjustments and settings.
If you select an item name followed by an
arrow (B), the next menu window with
setting items appears.
1
Press M/m to select an item you want
to set or adjust and press , or
.
Pop-up menu
Setting items
Press MENU.
The menu window appears.
Setting menu
2
Press M/m to select a menu item, and
press , or
.
The items that can be set or adjusted
with the selected menu appear. The item
presently selected is shown in white.
Adjustment menu
20
Next menu window
To reset the items that have been
adjusted
Setting items
Select an item in the menu screen, and
display the pop-up menu, the setting menu,
or the adjustment menu.
Press RESET on the remote control to reset
only the selected settings to its factory preset
value.
Note
The RESET button on the remote control is
available only when the adjustment menu or
the setting menu is selected.
4
Make the setting or adjustment of an
item.
When changing the adjustment
level
Press M/, to increase the value, and
press m/< to decrease the value.
Press
to store the setting and restore
the original menu screen.
When changing the setting
Press M/m to change the setting.
Press
to restore the original screen.
You can restore the original screen using
< depending on the selected item.
To clear the menu
Press MENU.
To reset the picture that has been
adjusted
Select “Reset” from the Picture
menu.
When the screen display appears, select
“Yes” using < and press
.
All of the following settings are reset to its
factory preset value:
“Reality Creation,” “Cinema Black Pro,”
“Motionflow,” “Contrast,” “Brightness,”
“Color,” “Hue,” “Color Temp.,”
“Sharpness,” and “Expert Setting” on the
Picture
menu
21
Picture Menu
The Picture menu is used for adjusting the picture.
Note
These items may not be adjustable or configurable, depending on the type of input signal. For details,
see “Input Signals and Adjustable/Setting Items” (page 54).
Item names in brackets represent those printed on the remote control.
Setting items
Description
Calib. Preset
[CALIBRATED
PRESET]
You can select the picture viewing mode that best suits the type of video
source or the environment.
You can save and use different preset modes for 2D/3D respectively.
Cinema Film 1: Picture quality suited to reproducing the highly
dynamic and clear images typical of master positive film.
Cinema Film 2: Picture quality suited to reproducing the rich tone and
color typical of a movie theater, based on the Cinema Film 1.
Reference: A picture quality setup suitable for when you want to
reproduce faithfully the original image quality, or for enjoying image
quality, without any adjustment.
TV: Picture quality suited for watching TV programs, sports, concerts,
and other video images.
Photo: Ideal for projecting still images taken with a digital camera.
Game: Picture quality suited to gaming, with well-modulated colors and
fast response.
Bright Cinema: Picture quality suited for watching movies in a bright
environment, such as a living room.
Bright TV: Picture quality suited for watching TV programs, sports,
concerts, and other video images in a bright environment, such as a
living room.
User: You can adjust the picture quality to suit your taste, and save the
setting. The factory default setting is the same as “Reference.”
Tip
Any adjustments to picture quality settings are saved for each input.
Reset
Resets all currently selected Calib. Preset mode settings to their default
values (page 21).
Tip
Reset does not affect settings saved for items of “Color Temp.”
22
Setting items
Description
Reality Creation
[REALITY
CREATION]
Adjusts the detail and noise processing of images. (Super-resolution
function)
On: Adjusts the settings of “Reality Creation.”
Database: Select “Normal” or “Mastered in 4K.”
“Mastered in 4K” provides image quality suitable for Blu-ray Disc™
“Mastered in 4K” releasing from Sony Pictures Home Entertainment.
Resolution: When you increase the setting value, the texture and detail
of the picture become sharper.
Noise Filtering: When you increase the setting value, the noise
(picture roughness) becomes less prominent.
Test: On/Off: Changes “On” and “Off” at a certain frequency to check
the effect of “Reality Creation.”
Tip
The display position of status during the test works together with the
“Menu Position” setting (page 29).
Off: The “Reality Creation” function is not applied.
Cinema Black Pro
Contrast Enhancer Corrects the level of bright and dark parts automatically to optimize
contrast according to a scene.
[CONTRAST
Increases image sharpness and makes image dynamic.
ENHANCER]
High/Middle/Low: You can adjust the contrast enhancer.
Off: The contrast enhancer function is not applied.
Lamp Control
Switches the lamp output.
High: Increases the brightness, and projects brighter images.
Low: Decreases the brightness, and enhances blacks by minimizing
brightness.
Tip
Setting “Low” reduces fan noise, while also reducing energy
consumption for longer lamp life.
Motionflow
[MOTIONFLOW]
Impulse: Reproduces original picture quality. Provides cinema-like
picture, which may flicker.
Combination: Reduces motion blur while maintaining brightness for
high-speed picture content.
Smooth High: Provides smoother picture movement; especially
effective for film-based content.
Smooth Low: Provides smoother picture movement for standard use.
True Cinema: Images, such as a movie created in 24 frames per second,
are reproduced at the original framerate.
Off: The “Motionflow” function is not applied.
Tips
• Select “Off” if the selected “Smooth High,” “Smooth Low,” “Impulse,”
“Combination,” or “True Cinema” results in a distorted picture.
• Depending on the picture content, you may not see the effect visually
even if you have changed the settings.
Contrast
[CONTRAST]
Adjusts the contrast.
Higher values increase the sharpness in images, while lower values
decrease the sharpness.
You can make adjustments by pressing the CONTRAST +/- on the
remote control.
When the HDR signal is input with “HDR10,” “HLG,” or “Auto” set for
“HDR,” “Contrast(HDR)” appears instead of “Contrast.”
23
Setting items
Description
Brightness
[BRIGHTNESS]
Adjusts the brightness of the picture.
The higher the setting, the brighter the picture. The lower the setting, the
darker the picture.
You can make adjustments by pressing the BRIGHTNESS +/- on the
remote control.
Color
Adjusts the color density.
The higher the setting, the greater the intensity. The lower the setting, the
lower the intensity.
Hue
Adjusts the color tone.
The higher the setting, the more greenish the picture becomes. The lower
the setting, the more reddish the picture becomes.
Color Temp.
[COLOR TEMP]
Adjusts the color temperature.
D93: Equivalent to 9,300 K color temperature normally used in TVs.
Gives white colors a blue tint.
D75: Equivalent to 7,500 K color temperature used as an ancillary
standard illuminant. Gives a neutral tint between “D93” and “D65.”
D65: Equivalent to 6,500 K color temperature used as a standard
illuminant. Gives white colors a red tint.
D55: Equivalent to 5,500 K color temperature used as an ancillary
standard illuminant. Gives white colors an even redder tint.
Custom 1 to 5: Enables you to adjust, set, and store your favorite color
temperature.
The factory default settings are as follows.
Custom 1: Same as “D93” color temperature setting.
Custom 2: Same as “D75” color temperature setting.
Custom 3: Same as “D65” color temperature setting.
Custom 4: Same as “D55” color temperature setting.
Custom 5: Setting that prioritizes brightness.
Tip
You can adjust each item to a color temperature according to your
preference.
Sharpness
[SHARPNESS]
Sharpens the outline of the picture, or reduces the noise.
The higher the setting, the sharper the picture. The lower the setting, the
softer the picture, thus reducing the noise.
You can make adjustments by pressing the SHARPNESS +/- on the
remote control.
Expert Setting
NR (Noise
Reduction)
Reduces the roughness or noise of the picture.
Auto: Detects the noise level to reduce the roughness or noise of the
picture automatically.
High/Middle/Low: Select a setting according to the roughness or noise
of the input signal source.
Off: The NR (noise reduction) function is not applied.
Tip
The noise level may not be detected accurately with “Auto” depending
on the input signal source. If the picture is unacceptable with “Auto,”
select a setting from among “High,” “Middle,” “Low” or “Off.”
24
Setting items
MPEG NR
(MPEG Noise
Reduction)
Description
Reduces block noise and mosquito noise, in particular in digital signals.
Auto: Detects the noise level to reduce the block noise and mosquito
noise of the picture automatically.
High/Middle/Low: Select a setting according to the block noise and
mosquito noise of the input signal source.
Off: The MPEG NR (MPEG noise reduction) function is not applied.
Tip
The noise level may not be detected accurately with “Auto” depending
on the input signal source. If the picture is unacceptable with “Auto,”
select a setting from among “High,” “Middle,” “Low” or “Off.”
Smooth Gradation Smooths the gradation of the flat parts of images.
High/Middle/Low: You can adjust the smooth gradation effect.
Off: The smooth gradation function is not applied.
Film Mode
According to the film source you have selected, make a setting for
playback.
Auto: Suitable for reproducing the original picture movement.
Normally, set this to “Auto.”
Off: Plays back the picture in progressive format without detecting
video signals automatically.
Gamma
Correction
[GAMMA
CORRECTION]
Adjusts the response characteristics of the tone of the picture.
Select a favorite tone from 10 options.
1.8: Bright Produces a brighter picture overall.
2.0
2.1
2.2
2.4
2.6: Dark
Produces a darker picture overall.
Gamma 7: Simulates the gamma curve of film.
Gamma 8: Increases the sharpness in images. Select this when you
watch in a bright environment, such as a living room.
Gamma 9: Produces a brighter picture than Gamma 8.
Gamma 10: Increases the sharpness in images. Select this when you
watch TV programs, etc., in a bright environment, such as a living room.
Off: The “Gamma Correction” function is not applied.
Color Correction
[COLOR
CORRECTION]
On: Adjusts Hue, Saturation or Brightness of the selected colors.
Repeat steps 1 and 2 described below to specify the target color.
1 Press M/m to select “Color Select,” then press </, to select the
color you want to adjust among “Red,” “Yellow,” “Green,” “Cyan,”
“Blue” and “Magenta.”
2 Press M/m to select “Hue,” “Saturation” or “Brightness,” then adjust
them to suit your taste using </, while watching the projected
picture.
Off: The “Color Correction” effect is not applied.
Clear White
Emphasizes vivid whites.
High/Low: You can adjust the “Clear White” effect.
Off: The “Clear White” effect is not applied.
25
Setting items
x.v.Color
Description
Set this item when connecting the unit with equipment that supports
x.v.Color and playing back an x.v.Color video signal.
On: You can play back an x.v.Color video signal.
Off: The “x.v.Color” function is not applied.
Tip
Setting x.v.Color to “On” disables gamma adjustment.
HDR
Sets how to play back HDR content.
Auto: Distinguishes HDR content automatically and applies the optimal
picture quality.
When an input signal supports BT.2020, the “Color Space” is set to
“BT.2020” automatically. When a signal other than BT.2020 is input, the
mode set in “Color Space” is applied. (“BT.2020” is not available in this
case.)
HDR10: Set when playing back HDR10-compatible content.
HLG: Set when playing back HLG-compatible content.
Off: Set when playing back content other than HDR content.
All of the modes of “Color Space” are selectable when “HDR10,”
“HLG,” or “Off” is selected.
Note
If the setting is not correct for the input content, the bright and dark areas
of the video may appear too bright or too dark. If you see the color
banding within the displayed image, you can eliminate it by turning off
the HDR setting of the connected device and the projector.
Color Space
[COLOR SPACE]
Converts the color space.
BT.709: An ITU-R BT.709 color space, which is used for highdefinition television broadcast or Blu-ray Disc. The color space is
equivalent to sRGB.
BT.2020: The color space is wider than BT.709. Use this setting when
playing back HDR content.
Color Space 1: The color space suited for watching TV programs and
video images, such as sport, concerts, etc.
Color Space 2: The color space suited for watching TV programs, sport,
concerts, and other video images in a bright environment, such as a
living room.
Color Space 3: The color space suited for watching movies in a bright
environment, such as a living room.
Custom: You can adjust the color space setting.
Note
When “HDR” is set to “Auto,” the selectable mode changes according to
the signal type (page 26).
Input Lag
Reduction
Reduces the delay of the display for a video.
On: Reproduces a smooth fast-moving video image with a reduced
sense of afterimage.
Off: Turns the Input Lag Reduction function off.
Tip
When “Input Lag Reduction” is set to “On,” Motionflow, NR, and MPEG
NR cannot be set.
26
Screen Menu
You can set the picture size, aspect mode, etc.
Note
These items may not be available, depending on the type of input signal. For details, see “Input
Signals and Adjustable/Setting Items” (page 54).
Item names in brackets represent those printed on the remote control.
Setting items
Description
Aspect
[ASPECT]
You can set the aspect ratio of the picture to be displayed for the current
input signal (page 16).
You can set the function only when a video signal other than a resolution
of 4096 × 2160 pixels is input.
1.85:1 Zoom: A 1.85:1 aspect ratio picture is displayed in its original
aspect ratio, enlarged so that black bands do not appear at the top and
bottom of the screen.
2.35:1 Zoom: A 2.35:1 aspect ratio picture is displayed in its original
aspect ratio, enlarged so that black bands at the top and bottom of the
screen are as small as possible.
When you select “2.35:1 Zoom” from “Trigger Select 1/2” on the
Installation
menu, a 12 V signal is output from the TRIGGER 1 or
TRIGGER 2 connector (page 34).
Normal: Input video is displayed in its original aspect ratio, enlarged to
fill the screen. This mode is suitable for viewing 1.78:1 (16:9) and 1.33:1
(4:3) video.
V Stretch: This is the most suitable mode for using a 2.35:1 screen to
view 2.35:1 video with a commercially available anamorphic lens.
When you select “V Stretch” from “Trigger Select 1/2” on the
Installation
menu, a 12 V signal is output from the TRIGGER 1 or
TRIGGER 2 connector (page 34).
Squeeze: With this setting, 1.78:1 (16:9) and 1.33:1 (4:3) video will be
displayed in their correct aspect ratios when you use a commercially
available anamorphic lens.
Stretch: Displays video that has been squeezed to 1.33:1 (4:3) as 1.78:1
(16:9) aspect ratio.
27
Setting items
Description
Tips
• When you select “V Stretch” or “Squeeze,” select the anamorphic lens
type from “Anamorphic Lens” in the Installation
menu.
• Selectable aspect modes vary depending on the input signal (page 57).
• The aspect cannot be selected for an input signal from a computer, or
an input signal with a resolution of 4096 × 2160 (pages 52, 53, 57).
Blanking
This feature allows you to adjust the displayable region within the four
directions of the screen.
On: Select the edge to adjust by highlighting Left, Right, Top, or Bottom
using the M/m buttons.
Adjust the amount of blanking using the </, buttons.
Off: Turns off the Blanking function.
Tip
Depending on the aspect ratio setting, right/left blanking may not be
available.
28
Setup Menu
The Setup menu is used to change the factory preset settings, etc.
Setting items
Description
Status
Sets whether or not the on-screen display is displayed.
Set to “Off” to turn off the on-screen displays except for certain menus,
message when turning off the power, and warning messages.
Language
Selects the language used in the menu and on-screen displays.
Menu Position
You can change the position to display the menu on the screen.
Bottom Left: Displays the menu on the bottom left area of the screen.
Center: Displays the menu on the center of the screen.
High Altitude Mode
Sets the unit to operate at the prevailing atmospheric pressure.
On: Use this setting when using the unit at an altitude of 1,500 m
(approx. 4,900 ft) or higher.
Off: Use this setting when using the unit at normal altitudes.
Tip
When this item is set to “On,” the fan noise becomes slightly louder
since the fan speed increases.
Remote Start
Sets the Remote Start settings.
On: You can turn on the power from a PC or a terminal which is
connected to a network.
Off: Turns off the Remote Start function.
Tips
• To use the function, the unit should be connected to the network in
advance (page 36).
• To turn on the power with the Remote Start function, a special
command should be sent from a PC or a terminal. For details, consult
with qualified Sony personnel.
Note
When Remote Start is set to “On,” the standby power requirement will
increase. When Network Management is set to “On,” the Remote Start
setting is set to “On” automatically, and you cannot change the setting.
Also, this is not displayed on the menu.
29
Setting items
Description
Network Management
On: Set when connected to the network and continuously
communicating with the projector control equipment.
Note
When Network Management is set to “On,” the network function is
continuously enabled. Set Network Management to “Off” for normal
use. If you set to “On,” the power consumption increases.
Power Saving
Sets the power saving mode.
Standby: If no signal is input for 10 minutes, power is turned off
automatically and the projector goes into standby mode.
Off: Disables the power saving function.
Lamp Setting
When replacing the lamps, set the desired lamp setting
(page 47).
All Reset
All settings are initialized to their factory preset values.
The “Lamp Timer” in the Information
30
menu is not reset.
Function Menu
The Function menu is used for changing the settings of the various functions of the unit.
Setting items
Description
3D Settings
You can change the settings of the 3D function.
2D-3D Display
Sel.
For Switching the video images to “2D” or “3D.”
Auto: Displays 3D video images when HDMI signals with 3D
information* are input. Displays 2D video images when other signals
are input.
3D: Displays 3D video images according to the 3D system selected in
“3D Format.” However, when HDMI signals with 3D information are
input to the unit, displays 3D video images according to the 3D system
of those HDMI signals.
2D: Displays 2D video images.
* The 3D information is additional information to discriminate 3D.
Some HDMI signals have additional information to discriminate 3D
and some HDMI signals have none.
3D Format: Set the 3D system when the input HDMI signals do not
include 3D information.
Simulated 3D: Converts 2D video images to 3D video images. The
setting can be made only for input the HD signals.
The simulated 3D feature may have limited effect, depending on the
video source.
There are differences in perception of 3D video images among
individuals.
Side-by-Side: Select this to display 3D images as two similar images,
side-by-side.
Over-Under: Select this to display 3D images as two similar images,
one above the other.
Tips
• “2D-3D Display Sel.” cannot be set to “3D” for some video sources.
For available 3D signals, see “Compatible 3D Signals” (page 55).
• The simulated 3D feature may have limited effect, depending on the
screen size (100 to 120 inches recommended) and the video source.
• The menu display has a ghost while a 3D video image is displayed and
is best viewed with the 3D glasses.
3D Brightness
For adjusting the brightness of the picture when watching 3D video
images.
You can select the brightness “High” or “Standard.”
31
Setting items
3D Depth Adjust
Description
For adjusting the depth of the 3D video images on the screen. The
setting can be made only when a 3D Format other than “Simulated 3D”
is selected.
Depth
Front
Normal
Depth
We recommend that “3D Depth Adjust” be set to “0.” The 3D video
images may be difficult to perceive, depending on the setting of “3D
Depth Adjust.”
Simulated 3D
Effect
For adjusting the 3D effect when 2D content is converted to 3D video
images. You can select the effect from among “High,” “Middle,” and
“Low.”
Tip
There are differences in perception of 3D video images converted by the
simulated 3D function among individuals.
Dynamic Range
Sets the video input level for HDMI 1 and HDMI 2 connectors.
Auto: Sets the video input level automatically.
Limited: The video input level is set for signals that are equivalent to
16-235.
Full: The video input level is set for signals that are equivalent to 0-255.
Note
If the video output setting of the connected HDMI device is not set
correctly, light and dark parts of the video may appear too light or too
dark.
HDMI Signal Format
Switches the video signal formats for 4K.
Standard Format: Displays a picture in the standard HDMI format.
Normally use this setting.
Enhanced Format: Displays a picture in a more detailed HDMI format.
Use this setting only when the corresponding devices are used.
Tips
• A picture or sound may not be output normally when “Enhanced
Format” is selected. In this case, set to “Standard Format.”
• Set “Enhanced Format” only when the corresponding devices are used.
• It may take time to display a picture after switching the video signal
formats.
Test Pattern
Displays a test pattern according to the setting.
On: A test pattern appears on the screen to be used when adjusting the
lens with “Lens Focus,” “Lens Zoom,” and “Lens Shift.”
Off: A test pattern does not appear.
Tip
While the test pattern is displayed, it is only displayed in green to allow
you to adjust the focus easily.
Settings Lock
Locks menu item settings to prevent operational error (page 33).
Off: Cancels the Settings Lock.
Level A: Group 1 items (below) are not displayed on the menu, and are
not available.
Level B: Group 1 and Group 2 items (below) are not displayed on the
menus, and are not available.
32
Items Locked by Settings Lock
Group 1
Group 2
Picture menu
Setup menu
Reset
Reality Creation
Contrast Enhancer
Lamp Control
Motionflow
Contrast
Brightness
Color
Hue
Color Temp.
Sharpness
NR
MPEG NR
Smooth Gradation
Film Mode
Gamma Correction
Color Correction
Clear White
x.v.Color
HDR
Color Space
Input Lag Reduction
Status
Language
Menu Position
High Altitude Mode
Remote Start
Network Management
Power Saving
Lamp Setting
Function menu
Dynamic Range
Test Pattern
Installation menu
Image Flip
Lens Control
Anamorphic Lens
Trigger Select
IR Receiver
Panel Alignment
Network Setting
33
Installation Menu
The Installation menu is used for changing the installation settings.
Setting items
Description
Image Flip
Flips the picture on the screen horizontally and/or vertically.
HV: Flips the picture horizontally and vertically.
H: Flips the picture horizontally.
V: Flips the picture vertically.
Off: The picture does not flip.
Use this item for installation for the backside projection or ceiling
installation.
Lens Control
Avoids any operation of the lens such as “Lens Focus,” “Lens Zoom,”
and “Lens Shift,” by mistake.
On: Enables adjustment of the lens.
Off: Prevents any adjustment of the lens.
Anamorphic Lens
Select a setting to match the anamorphic lens conversion ratio.
1.24x: Select this when you use an anamorphic lens with a horizontal
rate of 1.24×.
1.32x: Select this when you use an anamorphic lens with a horizontal
rate of 1.32×.
Trigger Select
Switches the output function of the TRIGGER 1/TRIGGER 2 connector.
Off: Turns off the TRIGGER connector function.
Power: Outputs 12 V signals from the TRIGGER 1/TRIGGER 2
connectors when the unit is on. The TRIGGER 1/TRIGGER 2
connectors do not output any signals when the unit is in standby.
V Stretch: Works with the “Aspect” setting’s “V Stretch”
(page 28) and outputs a 12 V signal from the TRIGGER 1 or TRIGGER
2 connector.
2.35:1 Zoom: Works with the “Aspect” setting’s “2.35:1 Zoom”
(page 28) and outputs a 12 V signal from the TRIGGER 1 or TRIGGER
2 connector.
IR Receiver
Selects the remote control detectors (IR Receiver) on the front and rear
of the unit.
Front & Rear: Activates both the front and rear detectors.
Front: Activates the front detector only.
Rear: Activates the rear detector only.
34
Setting items
Description
Panel Alignment
This feature allows you to adjust the gaps in the color of characters or
the picture on the screen.
Adjust: Adjusts the gaps in the colors selecting “Adjust Color” or
“Adjust Item.”
Adjust Item: Selects how to make adjustments from below.
Shift: Shifts the whole picture and makes adjustments.
Zone: Selects the desired range and makes adjustments.
Adjust Color: Assigns the desired color to adjust the gaps in color.
Select “R” (Red) or “B” (Blue) to make adjustments based on “G”
(Green).
Pattern Color: Select “R/G” (Red and Green) or “R/G/B” (White, all
colors) when “Adjust Color” is “R” (Red). Select “B/G” (Blue and
Green) or “R/G/B” (White, all colors) when the “Adjust Color” is “B”
(Blue).
Adjust: The shift adjustment and zone adjustment of the color selected
in “Adjust Color” can be made with </,, M/m buttons.
When “Shift” is selected: Assign the settings of the horizontal
direction (H) with </, buttons and the vertical direction (V) with
M/m buttons on the shift adjustment screen.
When “Zone” is selected: Select the position to adjust with </,
buttons for the horizontal position (H position) and M/m buttons for
the vertical position (V position), then press
.
Set the amount to adjust with </, buttons for the horizontal
direction (H direction) and with M/m buttons for the vertical
direction (V direction). You can select the position to adjust again by
pressing
.
Reset: Returns to the factory settings.
Preset: The optimized data has been preset.
Note
Depending on the adjustments made above, colors may become uneven
or the resolution may change.
35
Setting items
Description
Network Setting
Perform internet protocol settings.
IPv4 Setting
IP Address Setup: Selects the IP address setting method.
Auto (DHCP): The IP address is assigned automatically from the
DHCP server such as a router.
Manual: Specifies the IP address manually.
When “Manual” is selected for “IP Address Setup,” input “IP
Address,” “Subnet Mask,” and “Default Gateway.” Select each item
with the M/m buttons, then press
button. Select the frame to input
with the </, buttons and input the value with the M/m buttons.
When all items are entered, select “Apply,” and then press the
button. The entered settings will be registered.
IP Address: Sets the unit’s IP address.
Subnet Mask: Sets the unit’s subnet mask.
Default Gateway: Sets the unit’s default gateway.
MAC Address: Displays the unit’s MAC address. This cannot be
changed.
Apply: Enables the IP address that is set manually.
IPv6 Information
Displays the IPv6 information.
When you set the IPv6 IP address, set it on a Web browser (page 38).
36
Information Menu
The Information menu displays the model name, serial number, input signal type/format,
software version and the cumulated hours of usage of the lamp.
Signal type
Items
Description
Model Name
Displays the model name
Serial No.
Displays the serial number.
Signal type
Displays the resolution of the input signal which you are selecting.
When input signals with 3D information are input, the type of input
signals and the 3D format are displayed.
Color Format
Displays the color format of the input signal which you are selecting.
Color Space
Displays the color space of the input signal which you are selecting
(“BT.601,” “BT.709,” or “BT.2020”).
HDR Format
When the input signal is compatible with HDR, “HDR(HDR10)” or
“HDR(HLG)” is displayed according to the input signal.
Software Version
Displays the software version.
Lamp Timer
Indicates how long the lamp has been turned on (total usage).
Note
You cannot adjust or change the displays listed above.
About the Preset Memory
This unit has default image data to adjust preset data for input signals appropriately according
to the signals shown in “Preset Signals” (page 52) (the preset memory). When the preset signal
is input, the unit automatically detects the signal type and recalls the data for the signal from
the preset memory to adjust it to an optimum picture. The signal type is displayed in the
Information
menu.
Note
Depending on the computer input signal, parts of screen may be hidden or displayed incorrectly.
37
Using Network Features
Connection to the network allows you to
operate the following features:
• Checking the current status of the unit
via a Web browser.
• Making the network settings for the
unit.
• Network monitoring and controlling
with control protocol (SDAP
[Advertisement], SDCP [PJ Talk],
DDDP [AMX], Crestron RoomView,
Control4).
Displaying the
Control Window of
the Unit with a Web
Browser
1
Connect the LAN cable.
LAN cable
(straight type)
(not supplied)
Notes
• When connecting this projector with the
network, consult with the person who sets up
the network. The network must be secured.
• When using this projector connected with the
network, access the Control window via a
Web browser and change the access
limitation of the factory preset values
(page 40). It is recommended to change the
password regularly.
• When the setting on the Web browser is
completed, close the Web browser to log out.
• The menu displays used for the explanation
below may be different depending on the
model you are using.
• Supported Web browsers are Internet
Explorer 8/9/10/11.
• The menu displays only English.
• If the browser of your computer is set to [Use
a proxy server] when you have access to the
unit from your computer, click the check
mark to set accessing without using a proxy
server.
• AMX DDDP is not compatible with IPv6.
• These network functions are available when
the unit is turned on.
LAN
Connector
Hub, router, etc.
2
Set the network settings for the unit
using “Network Setting” on the
Installation
menu (page 36).
3
Start a Web browser on the computer,
enter the following in the address field,
then press the Enter key on your
computer.
http://xxx.xxx.xxx.xxx
(xxx.xxx.xxx.xxx: IP address for the
unit)
When connecting by the IPv6
address
http://[xxxx:xxxx:- xxxx]
You can confirm the IP address of the
unit under “Network Setting” on the
Installation
menu.
The following window appears in the
Web browser:
38
Operating the
Control Window
Switching the Page
Click one of the Page Switching buttons to
display the desired setting page.
Once you make the network settings,
you can open the Control window only
by performing step 3 of this procedure.
Page Switching buttons
Setting the Access Limitation
You can limit a user for accessing any
particular page.
Administrator: Allowed access to all
pages
User: Allowed access to all pages
except the Setup page
When you access the Setup page for the first
time, input “root” as the user name and
“Projector” as the password in the
authentication dialog.
When you log in for the first time, the
window that prompts you to change the
password is displayed. Follow the
instructions on the screen to change the
password.
The name of the administrator is preset to
“root.”
39
Entry area for [Administrator]
Entry area for [User]
The password can be changed in the
Password page in the Setup page.
When you change the password, input a new
password after deleting the password
(*****) that was set.
The password of the administrator and user
should be 8 to 16 characters that includes
both alphabet and numeric characters.
Alphabet is case-sensitive.
The default password “Projector” cannot be
set as a new password.
Note
If you forget your password, consult with
qualified Sony personnel.
Confirming the Information
Regarding the Unit
You can confirm the current settings for the
unit on the Information page.
Information area
40
Error Handling
Troubleshooting
If the unit appears to be operating erratically, try to diagnose and correct the problem using the
following instructions. If the problem persists, consult with qualified Sony personnel.
Power
Symptom
Cause and Remedy
The power is not turned
on.
The power may not turn on if you turn the power off with ?/
1 (ON/STANDBY) button and turn it on again in a short
time. After about 1 minute, turn the power on.
–
Close the lamp cover securely, then tighten the screws
securely.
48
Check warning indicators.
44
The power is suddenly
turned off.
Page
Check that “Power Saving” in the Setup
“Standby.”
menu is set to
Set “Power Saving” to “Off.”
30
30
Picture
Symptom
Cause and Remedy
No picture.
Check that the connecting cable is connected to the external
equipment properly.
11
Select the input source correctly using the INPUT button.
13
Check that the computer signal is set for output to an
external monitor.
If the notebook computer, etc., signal is output to its display
and an external monitor, the external monitor’s image may
not be displayed correctly. Set your computer to output the
signal to only an external monitor.
–
Video images are displayed in 3D. Watch the 3D video
images using the 3D glasses, and set “2D-3D Display Sel.”
to “3D.”
To convert 3D video images to 2D video images, set “2D3D Display Sel.” to “2D.”
14, 31
The picture has ghosts.
Page
Bright or dark area of the This symptom may occur when signal level other than those
video appears too bright of HDMI standard is input. Switch the output level of the
connected equipment, or switch the Dynamic Range on the
or too dark.
Function
menu of the unit.
32
The picture is too dark.
Adjust “Contrast” or “Brightness” on the Picture
properly.
23
The picture is not clear.
Adjust the focus.
8
If the lens is clouded with dew condensation, leave the unit
for about 2 hours with the power on.
–
The color of characters or Select the desired color registration in “Panel Alignment” of
the Installation
menu.
the picture is not
appropriate.
35
41
menu
Symptom
Cause and Remedy
Image is left on the
screen. (image retention)
When high contrast non-moving images are displayed for a
long period of time, there may be some image retention on
the screen. This is only a temporary condition. Turning off
the power for a while will eliminate the retained image.
Page
–
On-screen display
Symptom
Cause and Remedy
On-screen display does
not appear.
Set “Status” on the Setup
Page
menu to “On.”
Check if the ON/STANDBY indicator should light in green.
When the ON/STANDBY indicator blinks in green, the unit
is starting up. Wait until it stops blinking and remains lit in
green.
The model name does not The display mode of the unit may be set at the time of
purchase. Consult with your local dealer or qualified Sony
disappear from the
personnel.
screen.
29
7
–
Remote control
Symptom
Cause and Remedy
The remote control does
not work.
Batteries could be weak. Replace them with new batteries.
Page
–
Insert the batteries with the correct polarities.
–
If there is a fluorescent lamp near the remote control
detector, the unit may work improperly or inadvertently.
–
Confirm the position of the remote control detector on the
unit.
3, 4
Set “IR Receiver” to “Front & Rear” on the Installation
menu.
34
3D video images
Symptom
Cause and Remedy
Page
The video image does not Check if the 3D glasses are turned on.
seem like 3D video
Make sure that the battery in the 3D glasses could be weak
images.
or is sufficiently charged.
14
–
Set “2D-3D Display Sel.” to “Auto” or “3D.”
31
Check if the input signals are compatible 3D signals.
55
The 3D signals may not be input depending on the
specifications of the connected AV selector/AV amplifier/
external equipment. If the 3D signal is not input, confirm
the specifications and/or settings of the AV selector/AV
amplifier/external equipment.
–
When the viewing position is too far from the unit, the 3D
glasses may not be able to display the images properly.
14
The screen size is not appropriate. Set the zooming
magnification to low or watch the image from farther away
from the screen.
60
For details, see “Precautions for use” of “Using the 3D
Glasses.”
14
42
Others
Symptom
Cause and Remedy
The fan is noisy.
Check the setting of “High Altitude Mode” on the Setup
menu.
The lens shift cannot be
adjusted.
Page
29
Make sure that the room temperature is not too high.
–
Check the installation requirements of the unit.
Fan speed increases to maintain the product reliability of the
projector’s components in a room, where the temperature is
higher than normal. The fan noise becomes slightly louder.
The approximate normal temperature is 25°C (77°F).
–
The lens shift cannot be adjusted over the range of
movement. Adjust the lens shift within the range of
movement.
43
10, 60
Warning Indicators
The ON/STANDBY or WARNING indicator lights up or flashes if there is any trouble with
your projector.
ON/STANDBY
indicator
Flashing/Lighting indicators
(Lights in red)
(Flashes in red)
WARNING
indicator
The number of
flashes
Cause and Remedy
Twice
Close the lamp cover securely, then tighten
the screws securely (page 48).
Three times
The temperature of lamp is unusually high.
Turn off the power and wait for the lamp to
cool, then turn on the power again.
If the symptom persists, the lamp may be at
the end of its service life. In this case,
replace the lamp with a new one (page 47).
Twice
The internal temperature is unusually high.
Check to ensure that if nothing is blocking
the ventilation holes or whether or not the
unit is being used at high altitudes.
Three times
The fan is broken. Consult with qualified
Sony personnel.
(Flashes in red)
(Flashes in red)
Both indicators flash
Note
When a warning indicator other than the above starts flashing, and the symptom persists even after
carrying out the above methods, consult with qualified Sony personnel.
44
Message Lists
Warning messages
Symptom
Cause and Remedy
Page
High temp.! Lamp off in
1 min.
Turn off the power.
–
Check to ensure that nothing is blocking the ventilation
holes.
3, 4
Frequency is out of
range!
Frequency is out of range. Input a signal that is within the
acceptable frequency range of the unit.
52
Please replace the Lamp.
It is time to replace the lamp. Replace the lamp.
If this message appears again after you replace the lamp, the
lamp replacement process is not complete. Check the lamp
replacement process.
47
Note
To clear this message, press any button either on the remote
control or the control panel of the unit once.
Projector temperature is
high. High Altitude
Mode should be “On” if
projector is being used at
high altitude.
Check to ensure that nothing is blocking the ventilation
holes.
3, 4
When using the unit at high altitude, set “High Altitude
Mode” to “On.”
29
Note
When temperature inside the unit remains high, “High
Altitude Mode” is switched to “On” in 1 minute, then the
fan speed increases.
Power Saving Mode is
set. Projector will
automatically enter
Standby Mode in 1
minute.
“Power Saving” is set to “Standby.”
30
Note
If no signal is input, the power turns off after 1 minute, and
the projector goes into standby mode.
Caution messages
Symptom
Cause and Remedy
Page
x
No signal is input in the selected input. Check connections.
11
Not applicable!
Press the appropriate button.
The operation to be activated by the button is currently
prohibited.
–
Settings Lock enabled.
“Settings Lock” is set to “Level A” or “Level B.”
32
45
Others
Updating the
Software
About the simulated
3D feature
You can download files to update the
software of the unit. Copy the downloaded
files to your USB memory, insert the USB
memory to the USB terminal of the unit,
then perform the update.
To use the features updated, insert a USB
memory device into a PC connected to the
internet.
Download the update files from the
following Sony website:
https://esupport.sony.com/
The website also explains how to install the
update.
• Use the simulated 3D function taking into
account that the picture will provide a
different look from the original images,
because this function converts the video
images.
• Note that if the unit is used for profit or for
public viewing, displaying 2D video
images as 3D video images by converting
to the simulated 3D may constitute an
infringement of the rights of authors or
producers, which are legally protected.
NOTICES AND
LICENSES FOR
SOFTWARE USED IN
THIS PRODUCT
Note
Some USB memories may not be supported
for use. For details, refer to the website
above.
About HDR (high
dynamic range)
Refer to “Software License Information”
supplied separately.
HDR is a video expression which improves
the ability to express dark places and bright
places compared to previous video
expressions.
46
• Be sure to turn off the unit and unplug the
power cord before replacing the lamp, then
check the ON/STANDBY indicator has
already been turned off.
Replacing the Lamp
The lamp used for the light source has a
certain lifespan. When the lamp dims, the
color balance of the picture becomes
strange, or “Please replace the Lamp.”
appears on the screen, the lamp may be
exhausted. Replace the lamp with a new one
(not supplied) without delay.
Tip
The lifespan of the lamp used for the light
source changes depending on the installation
environment or use conditions. You can use the
lamp longer by avoiding turning the lamp off
until several minutes pass after turning the
lamp on.
1
Turn off the unit and unplug the AC
power cord.
2
When setting the unit on a flat surface
such as a desk etc., put a cloth to
prevent the surface from being
scratched. Place the unit on the cloth.
Note
Be sure that the unit is placed on a stable
surface.
3
While pressing the
part indicated
in the lamp cover illustration, slide 1
and then open 2 the lamp cover.
4
Loosen the lamp door (inner cover)
screw with a Phillips screwdriver, and
then open the lamp door.
Tools you need to get started:
• Projector Lamp LMP-H220 (Optional)
• Standard Phillips screwdriver
• Cloth (for scratch protection)
Caution
• The lamp remains hot after the unit is
turned off with the ?/1 (ON/STANDBY)
button. If you touch the lamp, you may
burn your fingers. When you replace the
lamp, wait for at least 1 hour for the lamp
to cool.
• Do not touch the surface of the lamp. If
you touch it, wipe off the fingerprints with
a soft cloth.
• Pay special attention to replacing the lamp
when the unit is installed on the ceiling.
• When replacing the lamp of a unit which is
on the ceiling, do not stand directly under
the lamp cover. When removing the lamp
door (inner cover), avoid twisting it. If the
lamp explodes, fragments may cause
injury.
• When removing the lamp unit, make sure
it remains horizontal, then pull straight up.
Do not tilt the lamp unit. If you pull out the
lamp unit while tilted and if the lamp
breaks, the pieces may scatter, causing
injury.
Notes
• Be sure to use an LMP-H220 Projector Lamp
for replacement. If you use lamps other than
the LMP-H220, the unit may malfunction.
47
6
5
Push in the new lamp by the handle
securely until it reaches the end, and
then tighten the 3 screws.
Loosen the 3 screws on the lamp with
the Phillips screwdriver. Hold up the
handle, then pull the lamp straight out.
Note
Be careful not to touch the optical block
inside the unit.
7
Close the lamp door (inner cover), and
then tighten the screw.
8
Close the lamp cover.
Handle
Notes
• Do not loosen other screws except the 3
specified screws.
• Hold the lamp by the handle to remove
and attach it.
48
9
Wipe dust off the ventilation holes
(intake) with a soft cloth.
• The unit will not turn on unless the lamp
cover are securely closed.
• To clear a message displayed on the screen,
press any button either on the remote control
or the control panel of the unit once.
Note on replacing the lamp when
broken, in the case of a ceiling
installation
If the lamp breaks, broken lamp pieces may
scatter and cause injury.
When the unit is on the ceiling, remove the
lamp door (inner cover) by sliding it
horizontally slowly after raising it with 30
degree opened. Avoid twisting the lamp door
(inner cover).
Ventilation holes
(intake)
10Turn on the unit, then select the lamp
setting item on the Setup
menu.
The menu screen below will be
appeared.
Note
The lamp contains mercury. The disposal
rules for used fluorescent tubes depend on
where you live. Follow the waste disposal
policy in your area.
Tip
If “Settings Lock” is set to “Level B,” set to
“Off” once.
11Select “Yes.”
Caution
Do not put your hands into the lamp
replacement slot, and do not allow any liquid
or other objects into the slot to avoid
electrical shock or fire.
Notes
• The unit will not turn on unless the lamp is
securely installed in place.
49
Disposal of the used lamp
Cleaning
For the customers in
the U.S.A. and Canada
Lamp contains
mercury. Dispose
according to applicable
local, state/province and
federal laws.
For additional information,
see www.sony.com/
mercury
Cleaning the cabinet
• To remove dust from the cabinet, wipe
gently with a soft cloth. If dust is
persistent, wipe with a soft cloth slightly
moistened with a diluted mild detergent
solution.
• Never use any type of abrasive pad,
alkaline/acid cleaner, scouring powder, or
volatile solvent, such as alcohol, benzene,
thinner or insecticide.
• Clean the unit with a cleaning cloth.
Wiping with a dirty cloth may scratch the
unit.
• Using such materials or maintaining
prolonged contact with rubber or vinyl
materials may result in damage to the
screen surface and cabinet material.
50
Specifications
Item
Description
Display system
SXRD panel, projection system
Display device
Size of effective
display area
Number of pixels
0.74-inch (18.8 mm) SXRD
26,542,080 pixels (8,847,360 pixels × 3)
Projection lens
2.06 times zoom lens (motorized)
f = 21.7 mm to 44.7 mm
F3.0 to F4.0
Light source
Ultra High Pressure Lamp 225 W type
Screen size
60 inches to 300 inches (1,524 mm to 7,620 mm)
(measured diagonally)
Accepted digital signals
480/60p, 576/50p, 720/60p, 720/50p, 1080/60i, 1080/
50i, 1080/60p, 1080/50p, 1080/24p, 3840 × 2160/24p,
3840 × 2160/25p, 3840 × 2160/30p, 3840 × 2160/50p,
3840 × 2160/60p, 4096 × 2160/24p, 4096 × 2160/25p,
4096 × 2160/30p, 4096 × 2160/50p, 4096 × 2160/60p
HDMI (2 inputs), HDCP compliant
RGB
Y PB/CB PR/CR
Other inputs/
outputs
TRIGGER
(2 connectors)
Minijack, DC 12 V Max. 100 mA
REMOTE
RS-232C: D-sub 9-pin (female)
LAN
RJ45, 10BASE-T/100BASE-TX
IR IN
Minijack
USB
DC 5 V, Max. 500 mA
Outside dimensions (w/h/d)
495.6 mm × 195.3 mm × 463.6 mm (19 1/2 × 7 11/16 ×
18 1/4 inches) (without protrusions)
Mass
Approx. 14 kg (31 lb)
Power requirements
AC 100 V to 240 V, 3.5 A to 1.5 A, 50/60 Hz
Power consumption
350 W
Power consumption Standby
Networked
Standby
Operating temperature
0.3 W (when “Remote Start” is set to “Off”)
1.0 W (LAN) (when “Remote Start” is set to “On”)
When a LAN terminal is not connected, it becomes a
low power consumption mode (0.5 W).
5°C to 35°C (41°F to 95°F)
Operating humidity
35% to 85% (no condensation)
Storage temperature
–20°C to +60°C (–4°F to +140°F)
Storage humidity
10% to 90%
Supplied accessories
See “Checking the Supplied Accessories” in the
supplied Quick Reference Manual.
Optional accessories
Projector Lamp: LMP-H220 (for replacement)
Projector Suspension Support: PSS-H10
Active 3D Glasses: TDG-BT500A
51
Notes
• The values for mass and dimensions are approximate.
• Not all optional accessories are available in all countries and area. Please check with your local
Sony Authorized Dealer.
• Information on accessories in this manual is current as of September 2016.
Design and specifications of this unit and its optional accessories are subject to change without
notice.
Preset Signals
The following table shows the signals and video formats which you can project using this unit.
When a signal other than the preset signal shown below is input, the picture may not be
displayed properly.
Preset
memory no.
Preset signal (resolution)
fH (kHz)
fV (Hz)
Sync
5
480/60p
480/60p
(Progressive NTSC)
(720 × 480p)
31.470
60.000
–
6
576/50p
576/50p
(Progressive PAL)
(720 × 576p)
31.250
50.000
–
7
1080/60i
1080/60i
(1920 × 1080i)
33.750
60.000
–
8
1080/50i
1080/50i
(1920 × 1080i)
28.130
50.000
–
10
720/60p
720/60p
(1280 × 720p)
45.000
60.000
–
11
720/50p
720/50p
(1280 × 720p)
37.500
50.000
–
12
1080/60p
1080/60p
(1920 × 1080p)
67.500
60.000
–
13
1080/50p
1080/50p
(1920 × 1080p)
56.260
50.000
–
14
1080/24p
1080/24p
(1920 × 1080p)
26.973
23.976
–
18
720/60p
(Frame packing)
720/60p
(1280 × 720p)
90.000
60.000
–
19
720/50p
(Frame packing)
720/50p
(1280 × 720p)
75.000
50.000
–
20
1080/24p
(Frame packing)
1080/24p
(1920 × 1080p)
53.946
23.976
–
26
640 × 480
VESA 60
31.469
59.940
H-NEG, V-NEG
32
800 × 600
VESA 60
37.879
60.317
H-POS, V-POS
37
1024 × 768
VESA 60
48.363
60.004
H-NEG, V-NEG
45
1280 × 960
VESA 60
60.000
60.000
H-POS, V-POS
47
1280 × 1024
VESA 60
63.974
60.013
H-POS, V-POS
50
1400 × 1050
SXGA+
65.317
59.978
H-NEG, V-POS
55
1280 × 768
1280 × 768/60
47.776
59.870
H-NEG, V-POS
71
1920 × 1080/60i
(Frame packing)
1080/60i
(1920 × 1080i)
67.500
60.000
–
52
Preset
memory no.
Preset signal (resolution)
fH (kHz)
fV (Hz)
Sync
72
1920 × 1080/50i
(Frame packing)
1080/50i
(1920 × 1080i)
56.250
50.000
–
74*
3840 × 2160/60p
3840×2160/60p
(3840 × 2160)
135.000
60.000
–
75*
3840 × 2160/50p
3840 × 2160/50p
(3840 × 2160)
112.500
50.000
–
76*
4096 × 2160/60p
4096 × 2160/60p
(4096 × 2160)
135.000
60.000
–
77*
4096 × 2160/50p
4096 × 2160/50p
(4096 × 2160)
112.500
50.000
–
78
4096 × 2160/30p
4096 × 2160/30p
(4096 × 2160)
67.500
30.000
–
79
4096 × 2160/25p
4096 × 2160/25p
(4096 × 2160)
56.250
25.000
–
93
3840 × 2160/24p
3840 × 2160/24p
(3840 × 2160)
53.946
23.976
–
94
3840 × 2160/25p
3840 × 2160/25p
(3840 × 2160)
56.250
25.000
–
95
3840 × 2160/30p
3840 × 2160/30p
(3840 × 2160)
67.433
29.970
–
96
4096 × 2160/24p
4096×2160/24p
(4096 × 2160)
54.000
24.000
–
* Available only for the YCbCr 4:2:0 signal. 8-bit video images are displayed.
Preset memory numbers for each input signal
Digital signal
Signal
Preset memory number
Component signal (HDMI 1, 2 connectors)
5 to 8, 10 to 14, 18 to 20, 71, 72, 74 to 79, 93 to
96
Video GBR signal (HDMI 1, 2 connectors)
5 to 8, 10 to 14, 18 to 20, 71, 72, 78, 79, 93 to
96
Computer signal (HDMI 1, 2 connectors)
10*, 12*, 26, 32, 37, 45, 47, 50, 55
* Some digital signals input from computers may be displayed as preset memory number of
Component or Video GBR signal.
53
Input Signals and Adjustable/Setting Items
The items in the menus available to adjust differ depending on the input signal. The following
tables indicate them. The items that cannot be adjusted/set are not displayed in the menu.
Picture menu
Item
Input signal
Component signal
Video GBR signal
Computer signal
Reality Creation
z
z
–
Contrast Enhancer
z
z
–
Lamp Control
z
z
z
Motionflow*1
z
z
–
Contrast
z
z
z
Brightness
z
z
z
Color
z
z
–
Hue
z
z
–
Color Temp.
z
z
z
z
z
–
NR
Sharpness
(excluding preset
memory numbers 18
to 20, 71, 72, 74 to
79, and 93 to 96)
(excluding preset
memory numbers 18
to 20, 71, 72, 78, 79,
and 93 to 96)
–
MPEG NR
z (excluding preset
memory numbers 18
to 20, 71, 72, 74 to
79, and 93 to 96)
z (excluding preset
memory numbers 18
to 20, 71, 72, 78, 79,
and 93 to 96)
–
Smooth Gradation
z (excluding preset
memory numbers 18
to 20, 71, 72, 74 to
79, and 93 to 96)
z (excluding preset
memory numbers 18
to 20, 71, 72, 78, 79,
and 93 to 96)
–
Film Mode
z (excluding preset
memory numbers 5,
6, 10 to 14, 18 to 20,
74 to 79, and 93 to
96)
z (excluding preset
memory numbers 5,
6, 10 to 14, 18 to 20,
78, 79, and 93 to 96)
–
Gamma Correction
z
z
z
Color Correction
z
z
z
Clear White
z
z
z
x.v.Color
z
–
–
(preset memory
numbers 74 to 79 and
93 to 96 only)
(preset memory
numbers 78, 79, and
93 to 96 only)
–
z
z
z
HDR
Color Space
z
z
z
z
z: Adjustable/can be set
–: Not adjustable/cannot be set
*1: For further details, refer to the tables in “Motionflow” (page 58).
54
Screen menu
Item
Aspect*
1
Input signal
Component signal
Video GBR signal
Computer signal
z (excluding preset
z (excluding preset
memory numbers 76 memory numbers 78,
to 79 and 96)
79 and 96)
–
z: Adjustable/can be set
–: Not adjustable/cannot be set
*1: For further details, refer to the tables in “Aspect Mode” (page 57).
Note
When connecting a cable such as an HDMI cable, etc., check the type of the signal in the Information
menu (page 37) and “Digital signal” (page 53), and check items that are adjustable/can be set.
Compatible 3D Signals
This unit accepts the following types of 3D signals.
Resolution
3D signal format
720/60p, 720/50p
Side-by-Side format
Over-Under format*
Frame packing*
1080/60i, 1080/50i
Side-by-Side format*
Frame packing
1080/24p
Side-by-Side format
Over-Under format*
Frame packing*
1080/60p, 1080/50p
Side-by-Side format
Over-Under format
*: Mandatory 3D format of the HDMI standards.
3D Signals and Adjustable/Setting Items
Some items on the menus may not be available to adjust/set, depending on the 3D signals.
The items that cannot be adjusted are not displayed on the menu. The following tables indicate
those items.
3D signals
Item
720/60p,
720/50p
1080/60i,
1080/50i
1080/24p
1080/60p,
1080/50p
Reality Creation
z
z
z
z
Lamp Control
z
z
z
z
Motionflow*1
z
z
z
z
NR
–
–
–
–
MPEG NR
–
–
–
–
Smooth Gradation
–
–
–
–
55
3D signals
Item
720/60p,
720/50p
1080/60i,
1080/50i
1080/24p
1080/60p,
1080/50p
Film Mode
–
z
–
–
x.v.Color
z
z
z
z
HDR
–
–
–
–
Aspect*2
z
z
z
z
z: Adjustable/can be set
–: Not adjustable/cannot be set
*1: The item is not available for Frame Packing/Over-Under on 720/60p, or Over-Under on 1080/
60p.
*2: For further details, refer to the tables in “Aspect Mode” (page 57).
When the unit is set to convert 2D video images to 3D video images, some items on the menus
may be not available to adjust/set, depending on the “3D Format” settings on the Function
menu. The items that cannot be adjusted are not displayed on the menu. The following tables
indicate these items.
Item
3D signals
Over-Under
Side-by-Side
Simulated 3D
Reality Creation
z
z
z
Lamp Control
z
z
z
Motionflow*1
z
z
z
NR
–
–
z
MPEG NR
–
–
z
Smooth Gradation
–
–
z
Film Mode*2
–
z
z
x.v.Color
z
z
z
HDR
–
–
–
Aspect*3
z
z
z
z: Adjustable/can be set
–: Not adjustable/cannot be set
*1: The item is not available for Over-Under on 720/60p, or Over-Under on 1080/60p.
*2: This item is available only when the 1080/60i or 1080/50i signal is input.
*3: For further details, refer to the tables in “Aspect Mode” (page 57).
56
Aspect Mode
Selectable items vary depending on the type of input signal or 3D format.
For details, see the tables below. Items that cannot be selected are not displayed in the menu.
2D
Acceptable signals
4096 × 2160
3840 × 2160
1920 × 1080
1280 × 720
720 × 480
720 × 576
Others
Preset memory
number (page 52)
76 to 79, 96
74, 75, 93 to
95
7, 8, 10 to 14
5, 6
26, 32, 37, 45,
47, 50, 55
–
1.85:1 Zoom
–
–
z
z
2.35:1 Zoom
–
z
z
z
–
z
z
z
z*
Normal
z*
1
V Stretch
–
–
z
z
–
Squeeze
–
–
z
z
–
Stretch
–
–
–
z
–
1
*1: Not displayed in the menu as fixed at Normal.
3D
Acceptable signals
1920 × 1080, 1280 × 720
3D format
Side-by-Side
Over-Under
Frame packing
Simulated 3D
Preset memory number
(page 52)
7, 8, 10 to 14
10 to 14
18 to 20, 71, 72
7, 8, 10 to 14
1.85:1 Zoom
z
z
z
z
2.35:1 Zoom
z
z
z
z
Normal
z
z
z
z
V Stretch
z
z
z
z
Squeeze
z
z
z
z
Stretch
–
–
–
–
57
Motionflow
Selectable items vary depending on the type of input signal or 3D format.
For details, see the tables below. Items that cannot be selected are not displayed in the menu.
2D
1920 × 1080
1280 × 720
720 × 480
720 × 576
3840 × 2160
4096 × 2160
Others
5 to 8, 10 to 14
74 to 79, 93 to 96
26, 32, 37, 45, 47,
50, 55
Acceptable signals
Preset memory number (page 52)
Impulse
z
z
–
Combination
z
–
–
Smooth High
z
–
–
Smooth Low
z
–
–
True Cinema
z
–
–
3D
Acceptable
signals
1920 × 1080, 1280 × 720
3D format
Preset memory
number (page 52)
Frame packing
18
19
Over-Under
20, 71,
72
10,12
11,13
14
Side-by-Side
Simulated 3D
7, 8, 10 to 14
7, 8, 10 to 14
Impulse
–
–
–
–
–
–
–
–
Combination
–
–
–
–
–
–
–
–
Smooth High
–
–
z
–
–
z
z
z
Smooth Low
–
z
z
–
z
z
z
z
True Cinema
–
–
–
–
–
–
–
–
Storage Conditions of Adjustable/Setting Items
Each adjustable/setting item is individually stored for each input connector. For further details,
see the tables below.
Preset memory numbers for each input signal
Input
Preset memory numbers
HDMI 1 (2D)
5 to 8, 10 to 14, 26, 32, 37, 45, 47, 50, 55, 74 to 79, 93 to 96
HDMI 2 (2D)
HDMI 1 (3D)
7, 8, 10 to 14, 18 to 20, 71, 72
HDMI 2 (3D)
58
Picture menu
Item
Storage conditions
Calib. Preset
For each input connector
Reset
For each input connector and Calib. Preset
Reality Creation
Contrast Enhancer
Lamp Control
Motionflow
Contrast
Brightness
Color
Hue
Color Temp.
D93-D55
Custom 1-5
Gain R
For each Color Temp., D93-D55 and Custom 1-5
Gain G
Gain B
Bias R
Bias G
Bias B
Sharpness
For each input connector and Calib. Preset
NR
MPEG NR
Smooth Gradation
Film Mode
Gamma Correction
Color Correction
Clear White
x.v.Color
HDR
Color Space
59
Projection Distance and Lens Shift Range
The projection distance refers to the distance between the front of the lens and the projected
surface.
Projection distance L
Projected image
Front of the lens
The lens shift range represents the distance in percent (%) by which the lens can be shifted from
the center of the projected image. The lens shift range is regarded as 0% when the point A in
the illustration (point where a line drawn from the center of the lens and the projected image
cross at right angles) is aligned with the center of the projected image and full width or full
height of the projected image is regarded as 100%.
Projected image
50%
Lens shift range
VS +
Center of the
projected image
Center of the lens
50%
Side of the unit
50%
Lens shift range
Center of the
projected image
Center of the lens
50%
A
Top of the unit
VS +:
VS –:
HS +:
HS –:
HS +
VS –
A
Projected image
HS –
Vertical lens shift range (up) [%]
Vertical lens shift range (down) [%]
Horizontal lens shift range (right) [%]
Horizontal lens shift range (left) [%]
60
Center of the lens
Projected image
Shaded region: Lens shift range
When projecting in 1.90:1 (Native Full Display 17:9) format
1.90
1
Projection distance
Unit: m (inches)
Projection image size
Diagonal
Width × Height
80" (2.03 m)
1.80 × 0.95 (71 × 37)
Projection distance L
2.32 – 4.77 (91 – 187)
100" (2.54 m)
2.25 × 1.18 (88 × 47)
2.90 – 5.97 (115 – 235)
120" (3.05 m)
2.70 × 1.42 (106 × 56)
3.49 – 7.18 (138 – 282)
150" (3.81 m)
3.37 × 1.78 (133 × 70)
4.38 – 8.98 (173 – 353)
200" (5.08 m)
4.49 × 2.37 (177 × 93)
5.85 – 11.99 (231 – 472)
Projection distance formula
D: Projected image size (Diagonal)
Unit: m (inches)
Projection distance L (minimal length)
Projection distance L (maximal length)
L = 0.029432 × D – 0.0434
(L = 1.158727 × D – 1.7084)
L = 0.060197 × D – 0.0420
(L = 2.369978 × D – 1.6545)
Lens shift range
85%
31%
31%
VS + = 85 – 2.742 × (HS + or HS –) [%]
VS – = 80 – 2.742 × (HS + or HS –) [%]
HS + = HS – = 31 – 0.365 × (VS + or VS –) [%]
80%
61
When projecting in 1.78:1 (16:9) format
1.78
Video display area
1
Projection area
Projection distance
Unit: m (inches)
Projection image size
Diagonal
Width × Height
80" (2.03 m)
1.77 × 1.00 (70 × 39)
Projection distance L
2.44 – 5.01 (96 – 197)
100" (2.54 m)
2.21 × 1.25 (87 × 49)
3.05 – 6.28 (121 – 247)
120" (3.05 m)
2.66 × 1.49 (105 × 59)
3.67 – 7.55 (145 – 297)
150" (3.81 m)
3.32 × 1.87 (131 × 74)
4.60 – 9.44 (181 – 371)
200" (5.08 m)
4.43 × 2.49 (174 × 98)
6.15 – 12.61 (242 – 496)
Projection distance formula
D: Projected image size (Diagonal)
Unit: m (inches)
Projection distance L (minimal length)
Projection distance L (maximal length)
L = 0.030934 × D – 0.0434
(L = 1.217856 × D – 1.7084)
L = 0.063269 × D – 0.0420
(L = 2.490916 × D – 1.6545)
Lens shift range
85%
33%
33%
VS + = 85 – 2.576 × (HS + or HS –) [%]
VS – = 80 – 2.576 × (HS + or HS –) [%]
HS + = HS – = 33 – 0.388 × (VS + or VS –) [%]
80%
62
When projecting in 2.35:1 format
2.35
Video display area
1
Projection area
Projection distance
Unit: m (inches)
Projection image size
Diagonal
Width × Height
80" (2.03 m)
1.87 × 0.80 (74 × 31)
Projection distance L
2.41 – 4.96 (95 – 195)
100" (2.54 m)
2.34 × 0.99 (92 × 39)
3.02 – 6.22 (119 – 244)
120" (3.05 m)
2.80 × 1.19 (110 × 47)
3.64 – 7.47 (143 – 294)
150" (3.81 m)
3.51 × 1.49 (138 × 59)
4.55 – 9.35 (180 – 368)
200" (5.08 m)
4.67 × 1.99 (184 × 78)
6.08 – 12.48 (240 – 491)
Projection distance formula
D: Projected image size (Diagonal)
Unit: m (inches)
Projection distance L (minimal length)
Projection distance L (maximal length)
L = 0.030617 × D – 0.0434
(L = 1.205377 × D – 1.7084)
L = 0.062621 × D – 0.0420
(L = 2.465393 × D – 1.6545)
Lens shift range
105%
31%
31%
VS + = 105 – 3.387× (HS + or HS –) [%]
VS – = 99 – 3.387 × (HS + or HS –) [%]
HS + = HS – = 31 – 0.295 × (VS + or VS –) [%]
99%
63
Dimensions
Front
Unit: mm (inches)
495.6 (19 1/2)
247.8 (9 3/4)
Center of the
lens
108
(4 1/4)
195.3 (7 11/16)
202.3 (7 31/32)
247.8 (9 3/4)
Bottom
Unit: mm (inches)
98 (3 27/32)
98 (3 27/32)
81.5
(3 7/32)
81.5
(3 7/32)
187.9 (7 13/32)
187.9 (7 13/32)
Front of the cabinet
87.3 (3 7/16)
142.8 (5 5/8)
150.6 (5 15/16)
408.9 (16 3/32)
463.6 (18 1/4)
64
7.5 (9/32)
The distance between the front of the lens and the front of the cabinet
Unit: mm (inches)
36.8 (1 7/16)
Front of the lens
Front of the cabinet
Attaching the PSS-H10 projector suspension support
Front view
Unit: mm (inches)
150 (5 29/32)
75
(2 15/16)
Ceiling
108 (4 1/4)
Center of the
supporting pole
175 (6 7/8)
8
(5/16)
Center of the lens
65
The bottom
surface of the
mount bracket
Side view
Unit: mm (inches)
213.5 (8 13/32)
130 (5 1/8)
Front of the cabinet
258.5 (10 3/16)
463.6 (18 1/4)
Top view
Unit: mm (inches)
213.4 (8 13/32)
130 (5 1/8)
Front of the cabinet
258.5 (10 3/16)
Upper ceiling mount bracket
Center of the supporting pole (The center of the
supporting pole is different from that of the unit.)
66
Holes for the ceiling mount
Use the screws with a length of 5.3 mm (7/32 inches, minimum) to 7.6 mm (5/16 inches,
maximum) for the ceiling mount.
Recommended tightening torque (tension when turning a screw towards the direction of
rotation): 1.4 ± 0.2 N-m
The minimum
length of screw
Insert nut (M5)
The maximum
length of screw
Screw hole
Unit
Unit: mm (inches)
67
Connecting to Video equipment or a
computer .......................................... 11
Connectors ................................................. 3
Contrast ................................................... 23
Contrast Enhancer ................................... 23
Control panel .............................................4
Index
Numerics
3D glasses
3D glasses communication range ....... 14
Using the 3D glasses ........................... 14
3D Settings
2D-3D Display Sel. (Select) ............... 31
3D Brightness ..................................... 31
3D Depth Adjust ................................. 32
3D Format ........................................... 31
Simulated 3D Effect ............................ 32
3D video ................................................. 14
D
Dimensions .............................................. 64
Dynamic Range ....................................... 32
E
Expert Setting .......................................... 24
F
A
Film Mode ............................................... 25
All Reset ................................................. 30
Anamorphic Lens ................................... 34
Aspect
1.85:1 Zoom .................................. 16, 27
2.35:1 Zoom .................................. 16, 27
Normal .......................................... 17, 27
Squeeze ......................................... 17, 27
Stretch ........................................... 18, 27
V Stretch ....................................... 17, 27
G
Gamma Correction .................................. 25
H
HDMI Signal Format .............................. 32
HDR ........................................................ 26
HDR Format ............................................ 37
High Altitude Mode ................................29
Hue .......................................................... 24
B
Blanking .................................................. 28
Brightness ............................................... 24
I
Image Flip ............................................... 34
Input Lag Reduction ................................26
Input signals and adjustable/setting
items ............................................... 54
IR Receiver .............................................. 34
C
Calib. Preset
Bright Cinema ..................................... 22
Bright TV ............................................ 22
Cinema Film 1 .................................... 22
Cinema Film 2 .................................... 22
Game ................................................... 22
Photo ................................................... 22
Reference ............................................ 22
TV ....................................................... 22
User ..................................................... 22
Cinema Black Pro ................................... 23
Cleaning .................................................. 50
Clear White ............................................. 25
Color ....................................................... 24
Color Correction ..................................... 25
Color Format ........................................... 37
Color Space ....................................... 26, 37
Color Temp. (Temperature) .................... 24
Compatible 3D signals ............................ 55
L
Lamp Control .......................................... 23
Lamp Setting ...........................................30
Lamp Timer ............................................. 37
LAN connector .................................... 3, 38
Language ................................................. 29
Lens adjustment window .........................10
Lens Control ............................................ 34
Location of controls
Front/Right side ..................................... 3
Rear/Left side/Bottom ...........................4
M
Menu
Function ............................................... 31
68
Signal type ............................................... 37
Smooth Gradation ................................... 25
Software Version ..................................... 37
Specifications .......................................... 51
Status ....................................................... 29
Information ......................................... 37
Installation .......................................... 34
Operation ............................................ 20
Picture ................................................. 22
Screen .................................................. 27
Setup ................................................... 29
Menu Position ......................................... 29
Messages
Caution ................................................ 45
Warning ............................................... 45
Motionflow ............................................. 23
MPEG NR (MPEG Noise Reduction) .... 25
T
Test Pattern .............................................. 32
Trigger Select .......................................... 34
Troubleshooting ...................................... 41
Turning off .............................................. 13
Turning on ................................................. 7
N
U
Network Management ............................ 30
Network Setting ...................................... 36
NR (Noise Reduction) ............................ 24
Updating the software ............................. 46
W
P
Warning indicators .............................. 3, 44
Panel Alignment ..................................... 35
Picture position adjustment ...................... 7
Power Saving .......................................... 30
Preset memory number ........................... 37
Preset mode
BRT CINE ........................................... 19
BRT TV ............................................... 19
CINEMA FILM 1 ............................... 19
CINEMA FILM 2 ............................... 19
GAME ................................................. 19
PHOTO ............................................... 19
REF ..................................................... 19
TV ....................................................... 19
USER .................................................. 19
Preset signals .......................................... 52
Projecting the Picture .............................. 13
Projection distance ...................... 61, 62, 63
Projection distance and lens shift
range ............................................... 60
X
x.v.Color .................................................. 26
Trademark Information
• “PlayStation” is a registered trademark
of Sony Computer Entertainment Inc.
• The terms HDMI and HDMI HighDefinition Multimedia Interface, and the
HDMI Logo are trademarks or registered
trademarks of HDMI Licensing LLC in
the United States and other countries.
• “Blu-ray” and “Blu-ray Disc” are
trademarks of Blu-ray Disc Association.
• “x.v.Color (x.v.Colour)” and “x.v.Color
(x.v.Colour)” logo are trademarks of
Sony Corporation.
R
Reality Creation ...................................... 23
Remote control ......................................... 5
Remote control detector ........................ 3, 4
Remote Start ........................................... 29
Replacing the lamp ................................. 47
Reset ....................................................... 22
Resetting the items .................................. 21
........................................................................
This projector supports DeepColor,
x.v.Color, LipSync, computer input signal,
3D signal and 4K signal of HDMI standards.
It also supports HDCP.
S
Settings Lock .......................................... 32
Sharpness ................................................ 24
69
© 2017 Sony Corporation
Download PDF
Similar pages