Industrial EN50155 4-Port 10/100/1000T 802.3at PoE + 2

IGS-5226-4P2T
Industrial EN50155 4-Port 10/100/1000T 802.3at PoE + 2-Port
10/100/1000T Managed Ethernet Switch(-40~75 degrees C)
Physical Port
• 6-port 10/100/1000BASE-T dustproof RJ45 copper with 4-port
IEEE 802.3at/af Power over Ethernet Injector function
Hardware Conformance
• Complies with IEEE 802.3at Power over Ethernet Plus endspan PSE
• Complies with IEEE 802.3af Power over Ethernet end-span
PSE
• Up to 4 ports of IEEE 802.3af/802.3at devices powered
• Supports PoE Power up to 36 watts for each PoE port
• Auto detects powered device (PD)
Suitable for Industrial Environment
PLANET IGS-5226-4P2T, an Industrial Layer 2+ Managed Ethernet Switch, comes with
an IP50-rated industrial case, 4-port 10/100/1000T 802.3at PoE, 2-port 10/100/1000T,
• Circuit protection prevents power interference between ports
• Remote power feeding up to 100 meters
• PoE Management
–– Total PoE power budget control
and static Layer 3 routing, providing a high level of immunity against electromagnetic
–– Per port PoE function enable/disable
interference and heavy electrical surges which are usually found on plant floors or
–– PoE Port Power feeding priority
in curb-side traffic control cabinets. The IGS-5226-4P2T can be easily mounted on a
–– Per PoE port power limitation
DIN rail or wall taking up less space. Each of the four Gigabit PoE+ ports provides
36 watts of power, which means a total power budget of up to 144 watts can be
utilized simultaneously without considering the different types of PoE applications being
–– PD classification detection
–– PD alive check
–– PoE schedule
–– PD scheduled power recycling
employed. It also provides a quick, safe and cost-effective Power over Ethernet network
• IP50-rated metal case
solution to IP security surveillance for small businesses and enterprises.
• Redundant power design
–– 48 to 56V DC, redundant power with polarity reverse
protect function
–– Active-active redundant power failure protection
IP50 Rugged Case
–– Backup of catastrophic power failure on one supply
–– Fault tolerance and resilience
• DIN-rail and wall-mount design
2 x Waterproof Gigabit RJ45
• Supports 6000V DC Ethernet ESD protection
• -40 to 75 degrees C operating temperature
Layer 3 IP Routing Features
4 x Waterproof Gigabit PoE+ RJ45
• Supports maximum 32 static routes and route summarization
Layer 2 Features
48~56V DC Waterproof M12
Redundant Power Input
• Prevents packet loss with back pressure (half-duplex) and
IEEE 802.3x pause frame flow control (full-duplex)
• High performance of Store-and-Forward architecture, and runt/
CRC filtering that eliminates erroneous packets to optimize the
network bandwidth
1
IGS-5226-4P2T
Dustproof RJ45 Ethernet Connector and Shielded Plug
The IGS-5226-4P2T is equipped with a 6-port 10/100/1000BASE-T auto-negotiation
dustproof RJ45 connector with 4-port IEEE 802.3at PoE+ (Port 3 to Port 6); each PoE port
provides 36-watt PoE output. These shielded RJ45 plugs can make the general UTP cable
dustproof. When connected to the dustproof RJ45 connector, it provides tight and strong
• Storm control support
–– Broadcast/Multicast/Unicast
• Supports VLAN
• IEEE 802.1Q tagged VLAN
connection, and ensures it comes with the industrial protection rating of IP50 capable of
–– Up to 255 VLANs groups, out of 4095 VLAN IDs
withstanding humidity, dirt, dust, shock, vibrations, heat and cold.
–– Provides Bridging (VLAN Q-in-Q) support (IEEE 802.1ad)
–– Private VLAN Edge (PVE)
–– Protocol-based VLAN
–– MAC-based VLAN
–– IP subnet-based VLAN
–– Voice VLAN
• Supports Spanning Tree Protocol
–– IEEE 802.1D Spanning Tree Protocol (STP)
–– IEEE 802.1w Rapid Spanning Tree Protocol (RSTP)
–– IEEE 802.1s Multiple Spanning Tree Protocol (MSTP),
spanning tree by VLAN
–– BPDU Guard
Environmentally Hardened Design
• Supports Link Aggregation
The IGS-5226-4P2T is able to protect itself from dust ingress, and to operate under the
–– 802.3ad Link Aggregation Control Protocol (LACP)
temperature range from -40 to 75 degrees C. All these features ensure the highest level
–– Cisco ether-channel (static trunk)
of reliability for mission-critical applications in any difficult environment.
–– Maximum 3 trunk groups, with 2 ports for each trunk
–– Up to 4Gbps bandwidth (full duplex mode)
• Provides port mirror (many-to-1)
• Port mirroring monitors the incoming or outgoing traffic on a
particular port
• Loop protection to avoid broadcast loops
• Supports E.R.P.S. (Ethernet Ring Protection Switching)
• IEEE 1588 and Synchronous Ethernet network timing
Quality of Service
• Ingress shaper and egress rate limit per port bandwidth
control
Dual Power Input for High Availability Network System
The IGS-5226-4P2T features a strong dual power input system (Dual 48V~56V DC)
incorporated into customer’s automation network to enhance system reliability and uptime.
For example, when DC Power 1 fails to work, the hardware failover function will be
activated automatically to keep powering the IGS-5226-4P2T via DC Power 2 alternatively
• 8 priority queues on all switch ports
• Traffic classification
–– IEEE 802.1p CoS
–– ToS/DSCP/IP precedence of IPv4/IPv6 packets
–– IP TCP/UDP port number
–– Typical network application
without any loss of operation.
• Strict priority and Weighted Round Robin (WRR) CoS policies
Centralized Power Management for Gigabit Ethernet PoE Networking
• DSCP remarking
• Traffic-policing policies on the switch port
To fulfill the needs of higher power required PoE network applications with Gigabit speed
transmission, the IGS-5226-4P2T features high-performance Gigabit IEEE 802.3at PoE+
Multicast
(up to 36 watts) on all ports. It perfectly meets the power requirements of PoE VoIP
• Supports IGMP snooping v1, v2 and v3
phone, PoE Wireless AP and all kinds of PoE IP cameras such as IR, PTZ, speed dome
• Supports MLD snooping v1 and v2
cameras and even box type IP cameras with a built-in fan and heater for high power
• Querier mode support
consumption. The IGS-5226-4P2T’s PoE capabilities also help to reduce deployment
• IGMP snooping port filtering
costs for network devices as a result of freeing from restrictions of power outlet locations.
Power and data switching are integrated into one unit, delivered over a single cable and
• MLD snooping port filtering
• MVR (Multicast VLAN Registration)
managed centrally. It thus eliminates cost for additional AC wiring and reduces installation
time.
2
IGS-5226-4P2T
Built-in Unique PoE Functions for Surveillance Management
As a managed PoE Switch for surveillance network, the IGS-5226-4P2T features the
following intelligent PoE management functions:
Security
• PD Alive Check
• Authentication
• Scheduled Power Recycling
–– IEEE 802.1x port-based/MAC-based network access
• SMTP/SNMP Trap Event Alert
authentication
• PoE Schedule
–– IEEE 802.1x authentication with guest VLAN
–– Built-in RADIUS client to cooperate with the RADIUS
Intelligent Powered Device Alive Check
servers
The IGS-5226-4P2T can be configured to monitor a connected PD (Powered Device) status
in real time via ping action. Once the PD stops working and it is without response, the IGS5226-4P2T will resume the PoE port power and bring the PD back to work. It will greatly
enhance the network reliability through the PoE port resetting the PD’s power source, thus
reducing administrator management burden.
–– RADIUS/TACACS+ users access authentication
• Access Control List
–– IP-based Access Control List (ACL)
–– MAC-based Access Control List (ACL)
• Source MAC/IP address binding
• DHCP Snooping to filter distrusted DHCP messages
• Dynamic ARP Inspection discards ARP packets with invalid
Step 1
Step 2
No Response......
PT PoE Camera
PD Status
Good!!
MAC address to IP address binding
• IP Source Guard prevents IP spoofing attacks
• IP address access management to prevent unauthorized
intruder
Ping Request
Ping Request
Ping Echo
Check alive status for 3 times
Step 4
Step 3
Alarm Notification
ON
OFF
• IPv4 and IPv6 dual stack management
• Switch Management Interfaces
–– Telnet command line interface
PD Alive!!
PoE
Management
PoE
ON
–– Web switch management
ON
Restart PoE device if without response
–– SNMP v1, v2c, and v3 switch management
–– SSH/SSL secure access
• IPv6 address/NTP management
• Built-in Trivial File Transfer Protocol (TFTP) client
• BOOTP and DHCP for IP address assignment
Scheduled Power Recycling
The IGS-5226-4P2T allows each of the connected PDs to reboot at a specified time each
week. Therefore, it will reduce the chance of PD crash resulting from buffer overflow.
• System Maintenance
–– Firmware upload/download via HTTP/TFTP
–– Reset button for system reboot or reset to factory default
–– Dual images
S M T W T F S
Automatically Reboot
Every Friday 23:00
CPU/Buffer
Load 85%
• DHCP relay and option 82
• User privilege levels control
• NTP (Network Time Protocol)
• Link Layer Discovery Protocol (LLDP) and LLDP-MED
• Network diagnostic
–– Cable diagnostic technology provides the mechanism to
PoE
ON OFF ON
CPU/Buffer
Load 10%
detect and report potential cabling issues
–– ICMPv6/ICMPv4 remote ping
• SMTP/Syslog remote alarm
PoE PT Camera
SMTP/SNMP Trap Event Alert
• Four RMON groups (history, statistics, alarms and events)
• SNMP trap for interface link up and link down notification
• System Log
• PLANET Smart Discovery Utility for deployment management
Though most NVR or camera management software offers SMTP email alert function,
the IGS-5226-4P2T further provides event alert function to help to diagnose the abnormal
device owing to whether or not there is a break of the network connection, loss of PoE
power or the rebooting response by the PD Alive Check process.
3
IGS-5226-4P2T
SMTP/SNMP Trap Event Alert
IGS-5226-4P2T
E-mail Alert
Malfunction
PoE
PoE
IP Camera
IP Camera
PoE Schedule for Energy Saving
Besides being used for IP surveillance, the IGS-5226-4P2T is certainly applicable to build any PoE network including VoIP and wireless LAN. Under the
trend of energy saving worldwide and contributing to the environmental protection on the Earth, the IGS-5226-4P2T can effectively control the power supply
besides its capability of giving high watts power. The “PoE schedule” function helps you to enable or disable PoE power feeding for each PoE port during
specified time intervals and it is a powerful function to help SMBs and enterprises save energy and budget.
8AM
5PM
5PM
PoE
PoE
PoE
8AM
PoE
PoE
PoE
PoE
PoE
Power
On
Power
On
Power
On
Power
On
6 Watts
6 Watts
12 Watts
12 Watts
Power
Off
Power
Off
Power
Off
Power
On
6 Watts
6 Watts
12 Watts
12 Watts
Save 24 watts/hr during off-business hours
Total consumption of 36 watts/hr
Total Saved = 10800 Watts/month
PoE
1000Base-T UTP with PoE
Redundant Ring, Fast Recovery for Critical Network Applications
The IGS-5226-4P2T supports redundant ring technology and features strong, rapid self-recovery capability to prevent interruptions and external intrusions. It
incorporates advanced ITU-T G.8032 ERPS (Ethernet Ring Protection Switching) technology, Spanning Tree Protocol (802.1s MSTP), and redundant power
input system into customer’s industrial automation network to enhance system reliability and uptime in harsh factory environments. In a certain, simple Ring
network, the recovery time of data link can be as fast as 20ms.
Office
Factory
1000
Industrial MAN Switch
Industrial 10G Switch
1000
E.R.P.S. Ring for Metropolitan Area Network Application
Recovery Time < 50ms
PoE
PoE
8-Port MAN Switch
IGS-5226-4P2T
Control Center
Highway
4
IGS-5226-4P2T
IPv6/IPv4 Dual Stack
Supporting both IPv6 and IPv4 protocols, the IGS-5226-4P2T helps data centers, campuses, telecoms, and more to experience the IPv6 era with the lowest
investment as its network facilities need not be replaced or overhauled if the IPv6 FTTx edge network is set up.
Layer 3 IPv4 and IPv6 VLAN Routing for Secure and Flexible Management
The IGS-5226-4P2T not only provides ultra high transmission performance, and excellent Layer 2 and Layer 4 technologies, but also layer 3 IPv4/IPv6 VLAN
routing feature which allows to crossover different VLANs and different IP addresses for the purpose of having a highly-secure, flexibly-managed and simple
networking application.
Robust Layer 2 Features
The IGS-5226-4P2T can be programmed for advanced switch management functions such as dynamic port link aggregation, Q-in-Q VLAN, private VLAN,
Multiple Spanning Tree Protocol (MSTP), Layer 2 to Layer 4 QoS, bandwidth control and IGMP/MLD Snooping. Via the link aggregation of supporting ports,
the IGS-5226-4P2T allows the operation of a high-speed trunk to combine with multiple fiber ports and supports fail-over as well.
MSTP
Q-in-Q
LACP
QoS
MLD
LLDP
IGMP
L2/L4
Managed Switch
L2/L4
Managed Switch
Powerful Security
The IGS-5226-4P2T offers a comprehensive Layer 2 to Layer 4 Access Control List (ACL) for enforcing security to the edge. It can be used to restrict
network access by denying packets based on source and destination IP address, TCP/UDP ports or defined typical network applications. Its protection
mechanism also comprises 802.1X Port-based and MAC-based user, and device authentication. With the private VLAN function, communication between
edge ports can be prevented to ensure user privacy. The IGS-5226-4P2T also provides DHCP Snooping, IP Source Guard and Dynamic ARP Inspection
functions to prevent IP snooping from attack and discard ARP packets with invalid MAC address. The network administrators can now construct highly-secure
corporate networks with considerably less time and effort than before.
Excellent Traffic Control
The IGS-5226-4P2T is loaded with powerful traffic management and QoS features to enhance connection services by telecoms and ISPs. The QoS features
include wire-speed Layer 4 traffic classifiers and bandwidth limit that are particularly useful for multi-tenant units, multi-business units, Telco and network
service providers’ applications. It also empowers the industrial environment to take full advantage of the limited network resources and guarantees the best
performance in VoIP and video conferencing transmission.
Efficient and Secure Management
With built-in Web-based management interface, the IGS-5226-4P2T L2+ Managed Switch offers an easy-to-use, platform-independent management and
configuration facility which includes Web and SNMP management interfaces. The SNMP can be managed via any management software based on the
standard of SNMP Protocol. For reducing product learning time, it offers Cisco-like command via Telnet and customer does not need to learn new console
command. Moreover, it also offers secure remote management by supporting SSH, SSL and SNMP v3 connections which encrypt the packet content at each
session.
IGS-5226-4P2T
01010101010110010101010100010101010
01010101010110010101010100010101010
01010101010110010101010100010101010
Computer
SSL
SNMPv3
SSH
5
IGS-5226-4P2T
Applications
High Availability Networking Solution for Surveillance System
The IGS-5226-4P2T features strong, rapid, self-recovery capability to prevent interruptions and external intrusions. It incorporates ITU-T G.8032 ERPS
(Ethernet Ring Protection Switching) into customer’s automation network to enhance system reliability and uptime. The IGS-5226-4P2T is the ideal solution
for surveillance system to build redundant connection and establish high bandwidth for public transmission system and railway transmission.
Control Center
IGS-5226-4P2T
IGS-5226-4P2T
IGS-5226-4P2T
Dual Band AP
Dual Band AP
ERPS Ring
Recovery time <50 ms
PoE
PoE
PoE
PoE
IP Camera
IP Camera
Railway
Platform
PoE
PoE
100BASE-TX UTP with PoE
1000BASE-T UTP
1000BASE-T UTP with PoE
Layer 3 VLAN Routing and PoE Application
With the built-in, robust Layer 3 routing protocols, the IGS-5226-4P2T ensures reliable routing between VLANs and network segments. The routing protocols
can be applied by VLAN interface with up to 32 routing entries. The IGS-5226-4P2T, certainly an ideal solution for industries, offers greater security, control
and bandwidth conservation, and high-speed uplink.
Railway Transmission System
Passenger
Information System
PoE IP Camera
Next Stop
Entertainment
System
IP Surveillance Domain
192.168.10.x/24
PoE
PoE
Laptop
Wireless AP Domain
192.168.20.x/24
NVR
N
N
AP
Content
Server
Industrial IP50-rated
PoE Ethernet Switch
IGS-5226-4P2T
PoE
PoE
PoE
PoE
PoE
IGS-5226-4P2T
IGS-5226-4P2T
PoE IP Camera
Dual Band Wireless AP
Control Center
IGS-5226-4P2T
PoE
IGS-5226-4P2T
PoE IP Camera
PoE IP Camera
PoE
PoE
100BASE-TX UTP with PoE
1000BASE-T UTP
1000BASE-T UTP with PoE
PoE
Industrial Backbone
Switch
PoE
PC
VoIP
PoE
PC
AP
PoE
100BASE-TX UTP
100BASE-TX UTP with PoE
1000BASE-T UTP
1000BASE-T UTP with PoE
6
IGS-5226-4P2T
Product Specifications
IGS-5226-4P2T
Product
Hardware Specifications
Copper Ports
6 10/100/1000BASE-T dustproof RJ45 auto-MDI/MDI-X ports
PoE Injector Port
4 ports with 802.3at/af PoE injector function (Port-3 to Port-6)
Power Connector
1 x M12, 5-pin A-Coded male connector
Switch Architecture
Store-and-Forward
Switch Fabric
12Gbps/non-blocking
Throughput
8.9Mpps@64bytes
Address Table
8K entries, automatic source address learning and aging
Shared Data Buffer
4M bits
Flow Control
IEEE 802.3x pause frame for full-duplex
Back pressure for half-duplex
Jumbo Frame
9K bytes
Reset Button
< 5 sec: System reboot
> 5 sec: Factory default
Dimensions (W x D x H)
132 x 75 x 160 mm
Weight
809g
Enclosure
IP50 metal case
Installation
Wall-mount and DIN rail kit
LED
System:
PWR1 (Green), PWR2 (Green), Fault (Red)
Ring (Green), R.O. (Green)
10/100/1000T RJ45 Interfaces (Port 1 to Port 2):
LNK/ACT (Green)
10/100/1000T RJ45 Interfaces (Port 3 to Port 6):
LNK/ACT (Green)
PoE-in-Use (Orange)
Power Consumption
Max. 165.3 watts/563.67 BTU
Power Requirements
Dual 48~56V DC (>53V DC for PoE+ output recommended)
ESD Protection
6KV DC
Power over Ethernet
PoE Standard
IEEE 802.3af/802.3at PoE/PSE
PoE Power Supply Type
End-span
IEEE 802.3af Standard
- Per port 48V~53V DC (depending on the power supply), max. 15.4 watts
PoE Power Output
IEEE 802.3at Standard
- Per port 53V~56V DC (depending on the power supply), max. 36 watts
Power Pin Assignment
1/2(+), 3/6(-)
PoE Power Budget
PoE Ability
144 watts max. (depending on power input)
PD @ 7 watts
4 units
PD @ 15.4 watts
4 units
PD @ 30.8 watts
4 units
Layer 2 Management Functions
Port Configuration
Port disable/enable
Auto-negotiation 10/100/1000Mbps full and half duplex mode selection
Flow control disable/enable
Port Status
Display each port’s speed duplex mode, link status, flow control status,
auto-negotiation status, trunk status
Port Mirroring
TX/RX/Both
Many-to-1 monitor
VLAN
802.1Q tagged based VLAN
Q-in-Q tunneling
Private VLAN Edge (PVE)
MAC-based VLAN
Protocol-based VLAN
Voice VLAN
IP Subnet-based VLAN
MVR (Multicast VLAN registration)
Up to 255 VLAN groups, out of 4095 VLAN IDs
Link Aggregation
IEEE 802.3ad LACP/static trunk
3 groups with 2 ports per trunk
Spanning Tree Protocol
IEEE 802.1D Spanning Tree Protocol (STP)
IEEE 802.1w Rapid Spanning Tree Protocol (RSTP)
IEEE 802.1s Multiple Spanning Tree Protocol (MSTP)
7
IGS-5226-4P2T
QoS
IGMP Snooping
MLD Snooping
Access Control List
Bandwidth Control
Traffic classification based,strict priority and WRR
8-level priority for switching:
- Port number
- 802.1p priority
- 802.1Q VLAN tagging
- DSCP/ToS field in IP packet
IGMP (v1/v2/v3) snooping, up to 255 multicast groups
IGMP querier mode support
MLD (v1/v2) snooping, up to 255 multicast groups
MLD querier mode support
IP-based ACL/MAC-based ACL
Up to 256 entries
Per port bandwidth control
Ingress: 100Kbps~1000Mbps
Egress: 100Kbps~1000Mbps
Layer 3 Functions
IP Interfaces
Max. 8 VLAN interfaces
Routing Table
Max. 32 routing entries
Routing Protocols
IPv4 software static routing
IPv6 software static routing
Management
Basic Management Interfaces
Telnet, Web browser, SNMP v1, v2c
Secure Management Interfaces
SSH, SSL, SNMP v3
RFC 1213 MIB-II
RFC 1493 Bridge MIB
RFC 1643 Ethernet MIB
RFC 2863 Interface MIB
RFC 2665 Ether-Like MIB
RFC 2819 RMON MIB (Groups 1, 2, 3 and 9)
RFC 2737 Entity MIB
RFC 2618 RADIUS Client MIB
RFC 2863 IF-MIB
RFC 2933 IGMP-STD-MIB
RFC 3411 SNMP-Frameworks-MIB
RFC 4292 IP Forward MIB
RFC 4293 IP MIB
RFC 4836 MAU-MIB
IEEE 802.1X PAE
LLDP
Power over Ethernet MIB
SNMP MIBs
Standards Conformance
Regulatory Compliance
Stability Testing
Railway Traffic
Standards Compliance
FCC Part 15 Class A, CE
IEC 60068-2-32 (free fall)
IEC 60068-2-27 (shock)
IEC 60068-2-6 (vibration)
*EN50155
IEEE 802.3 10BASE-T
IEEE 802.3u 100BASE-TX
IEEE 802.3ab Gigabit 1000T
IEEE 802.3x flow control and back pressure
IEEE 802.3ad port trunk with LACP
IEEE 802.1D Spanning Tree Protocol
IEEE 802.1w Rapid Spanning Tree Protocol
IEEE 802.1s Multiple Spanning Tree Protocol
IEEE 802.1p Class of Service
IEEE 802.1Q VLAN tagging
IEEE 802.1X Port Authentication Network Control
IEEE 802.1ab LLDP
IEEE 802.3af Power over Ethernet
IEEE 802.3at Power over Ethernet Plus
IEEE 802.3az EEE (Energy Efficient Ethernet)
RFC 768 UDP
RFC 793 TFTP
RFC 791 IP
RFC 792 ICMP
RFC 2068 HTTP
RFC 1112 IGMP v1
RFC 2236 IGMP v2
RFC 3376 IGMP v3
RFC 2710 MLD v1
FRC 3810 MLD v2
ITU-T G.8032 ERPS (Ethernet Ring Protection Switching)
Environment
Operating
Storage
Temperature: -40 ~ 75 degrees C
Relative Humidity: 5 ~ 95% (non-condensing)
Temperature: -40 ~ 80 degrees C
Relative Humidity: 5 ~ 95% (non-condensing)
Standard Accessories
Packet Contents
6 x Waterproof RJ45 Connector
1 x M12 5-pin A-coded female connector power cable, 1.2m
1 x Wall-mount kit
1 x DIN-rail kit
1 x M12 Power Waterproof Cap
1 x Quick Installation Guide
8
IGS-5226-4P2T
Ordering Information
Top View
Side View
Front View
Side View
Rear View
LNK/ACT
LNK
ACT
1
2
LNK/ACT
PoE
3
4
LNK/ACT
PoE
5
6
FAULT
V2
V1
V2
V1
Mounting Kit
PWR 2 R.O.
PWR 1 Ring
INPUT
DC 48~56V
PoE IP50 Mgt. IGS-5226-4P2T
Dimensions ( unit = mm )
Reset
Bottom View
Ordering Information
IGS-5226-4P2T
Industrial EN50155 4-Port 10/100/1000T 802.3at PoE + 2-Port 10/100/1000T Managed Ethernet Switch
(-40~75 degrees C)
Related Products
IGS-604HPT-RJ
Industrial IP67-rated 4-Port 10/100/1000T 802.3at PoE + 2-Port 10/100/1000T Managed Ethernet Switch (-40~75
degrees C)
IGS-604HPT-M12
Industrial IP67-rated 4-Port 10/100/1000T 802.3at PoE + 2-Port 10/100/1000T Managed Ethernet Switch (-40~75
degrees C)
ISW-800T-M12
Industrial IP67-rated 8-Port 10/100Mbps M12 Ethernet Switch (-40~75 degrees C)
ISW-804PT-M12
Industrial IP67-rated 8-Port 10/100Mbps M12 Ethernet Switch with 4-Port PoE (-40~75 degrees C)
PLANET Technology Corporation
11F., No.96, Minquan Rd., Xindian Dist., New Taipei City 231,
Taiwan (R.O.C.)
Tel: 886-2-2219-9518 Fax: 886-2-2219-9528
Email: sales@planet.com.tw www.planet.com.tw
IGS-5226-4P2T
PLANET reserves the right to change specifications without prior notice. All brand names and trademarks are property of
their respective owners. Copyright © 2016 PLANET Technology Corp. All rights reserved.
9
Download PDF
Similar pages