Fiber Optic Industrial Modem 4 x 10/100/1000M Ports GB Switch 2 x

Communications Inc.
Fiber Optic Industrial Ethernet
4 x 10/100/1000M Ports GB Switch
2 x RS-232/422/485 Data Channels
ITS Equipment Series
Model IE240
Overview
The Vilink IE240 Gigabit Ethernet Switch is specially designed to use at the Remote Locations in Intelligent Traffic and METRO
Monitoring and Controlling Systems. It is extremely flexible for connecting multiple devices together in the Ethernet TCP/IP Local
Area Network (LAN). The IE240 provides 4 ports 10/100/1000M Ethernet packaged data for various IP devices such as HD IP Video
and Traffic Violation Video Detection and 2 data channels for connecting the old standard traffic monitoring and controlling Pull
& Response RS-232/422 data, plus PTZ Data for HD IP PTZ Dome Cameras in the network.
The Dual Fiber Optic Interface are designed with Automatic Gain Controls (AGC) technique, utilized WDM technology to allow the
users to use only one fiber per link, it is a very cost effective for connecting multiple Remote locations in Daisy-Chain and
Redundant Ring configurations.
The IE240 Web-Based Management offers an easy-to-use and configuration facility, via the WEB interface, it can be programmed
for basic management functions such as per port speed duplex settings, Port Trunking, VLAN, Port Mirroring, network security
authentication and misc configurations. Additionally, the firmware includes advanced features such as IGMP snooping, QoS
(Quality of Service), broadcast storm and bandwidth control, to enhance bandwidth utilization. The extended temperature
capability for meeting NEMA specifications satisfies very critical applications requiring high quality data transmission performance
with high reliability.
Applications include ITS Intelligent Traffic System, Metro Operation, HDTV Broadcasting System, IP cameras Surveillance,
Homeland Security, Utility Management, Premise Networks, Military Hardened applications or anything requiring high speed
Ethernet Network performance.
Features
·
·
·
·
·
·
·
·
·
·
·
·
4 x 10/100/1000M TX Ports and 1 x 1000 Base-SX Port
Complies with IEEE 802.3 10Base-T, IEEE 802.3u 100Base-TX,
IEEE 802.3z 100Base SX
Built-in Web Interface for Remote Management
Manual IP Setting / DHCP Client for IP Assignment
9K Jumbo frame supports at all speed
Supports Maximum Frame Size to 16 K
Supports IEEE 802.1Q VLAN and Q-in-Q VLAN groups
2 x RS-232/422/485 Switchable Data ports
Master / Slave Configuration
Applications
·
·
·
·
·
·
·
ITS Traffic Monitor & Control
SCADA Networks
Metro Networks
Gas & Oil Fields Monitoring
Railroad Networks
Military Applications
Data Acquisition Applications
Point-To-Point or Point-To-Multipoint
Distance Up To 40 Km @ Single Mode
One Fiber Link, WDM Technology, ST Connector
Ordering Information
Model
Descriptions
IE240ST05
IE240ST35
Fiber Optic Gigabits Ethernet Switch 4x10/100/1000M-TX, 1x1000M-SX, 2xRS-232/422, ST SM, 1550T1310R 1 Fiber, 40Km, +12 VDC
Fiber Optic Gigabits Ethernet Switch 4x10/100/1000M-TX, 2x1000M-SX, 2xRS-232/422, ST SM, 1310/1550nm, 2 Fibers, 40Km, +12 VDC
*** Please Consult Factory for Additional Model Numbers***
450 Goddard, Irvine, California 92618 – Tel: 714-809-0345 – Fax: 949-265-3005
Email: sales@vilinknet.com – Web: www.vilinknet.com
Technical
Specifications
Communications Inc.
ITS Equipment Series
Model IE240
Fiber Interface:
System:
Error Rate
Network Standard
Frame size
Jumbo Frame
Layer 2 Management
12
1 in 10 or Better
IEEE 802.3 10BASE-T
IEEE 802.3u 100BASE-TX
IEEE 802.3z FX
IEEE 802.3x Flow Control
IEEE 802.3ad Port trunk with LACP
IEEE 802.3w RSTP
IEEE 802.1Q VLAN Tagging
16K Bytes
9000 Bytes
Store-and Forward
Remote Monitoring (RMON)
Far-end Fault Indication (FEFI)
Link Fault Pass Through (LFP)
Auto Recovery
Remote Management and Set Up
Manual IP Address Setting / DHCP
Loopback, Broadcast, Multicast,
Unicast storm control
Speed Duplex Mode Configuration
Bandwidth Control on TP/FX
Port
Data Rate
Transmission Mode
Wavelength
Connector
Distance
2 x 1000 Base-SX
1000 Mbps
Full Duplex on 1 Fiber
T1310/R1550nm & T1550/R1310nm
ST
40 Km @ SM
Ethernet TX Interface:
TX Port
Data Rate
Connector
Transmission Mode
4 x 10/100/1000 Base-TX
Auto-Negotiation MDI/MDIX
10/100/1000 Mbps
RJ45
Half/Full Duplex
Data Interface:
Channel
Standard
Data Rate
Default Set Up
Connector
2 Point-To-Multipoint Channels
EIA-RS-232/RS422 Switchable
DC to 112 Kbps
9.6 Kbps
Twisted Pair RJ45
Network Management :
Environment:
0
Operating
Storage
Humidity
0
-34 C to +74 C
-400C to + 950C
98% Non-Condensing
Physical:
Dimension
Power
6"x4"1.25" Or 5"x11.50"x1.1"
12 VDC Or 90~240 VAC
Interface
Port Configuration
VLAN
QoS
SNMP MIBs
Application
Web Browser, SNMPv1, v2c Monitor
Port enable, Auto-Negotiation, Full
and Half Duplex mode, Flow Control
Enable, Bandwidth Control
16 IEEE 802.1Q VLAN / Q-in-Q VLAN
802.1p Priority, DSCP field in IP
RFC-1213 MIB-2, RFC-1573 MIB
RFC-2819 RMON MIB (Group 1)
WM18
IE2400
IE240
IE220
IE220
SM Gigabit Ethernet
Self-Healing Data Ring
IE240
IE220
IE220 In
VK2300 Chassis
IE240
IE240
IE240
Sing Mode Fiber Star Configuration (Up to 40 Km per Link)
Traffic Monitor &
Control System
IE240
450 Goddard, Irvine, California 92618 – Tel: 714-809-0345 – Fax: 949-265-3005
Email: sales@vilinknet.com – Web: www.vilinknet.com
Download PDF
Similar pages