Hi-Fi A85W/Hi-Fi A75W Setup Manual
FCC Information and Copyright
This equipment has been tested and found to comply with the limits of a Class
B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed
to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. There is no guarantee
that interference will not occur in a particular installation.
The vendor makes no representations or warranties with respect to the
contents here and specially disclaims any implied warranties of merchantability
or fitness for any purpose. Further the vendor reserves the right to revise this
publication and to make changes to the contents here without obligation to
notify any party beforehand.
Duplication of this publication, in part or in whole, is not allowed without first
obtaining the vendor’s approval in writing.
The content of this user’s manual is subject to be changed without notice and
we will not be responsible for any mistakes found in this user’s manual. All the
brand and product names are trademarks of their respective companies.
Dichiarazione di conformità
sintetica
Ai sensi dell’art. 2 comma 3 del D.M.
275 del 30/10/2002
Si dichiara che questo prodotto è
conforme alle normative vigenti e
soddisfa i requisiti essenziali richiesti
dalle direttive
2004/108/CE, 2006/95/CE e
1999/05/CE
quando ad esso applicabili
Short Declaration of conformity
We declare this product is complying
with the laws in force and meeting all
the essential requirements as specified
by the directives
2004/108/CE, 2006/95/CE and
1999/05/CE
whenever these laws may be applied
Table of Contents
Chapter 1: Introduction ................................................. 1
1.1
1.2
1.3
1.4
1.5
Before You Start ................................................................................1
Package Checklist.............................................................................1
Motherboard Features......................................................................2
Rear Panel Connectors .....................................................................3
Motherboard Layout ........................................................................4
2.1
2.2
2.3
2.4
Installing Central Processing Unit (CPU).......................................5
FAN Headers......................................................................................7
Installing System Memory ................................................................8
Connectors and Slots .......................................................................10
3.1
3.2
How to Setup Jumpers ....................................................................13
Detail Settings..................................................................................13
4.1
4.2
4.3
AMD Dual Graphics Technology Introduction.............................18
AMD Dual Graphics Requirement ................................................18
AMD Dual Graphics Setup .............................................................19
5.1
5.2
5.3
Operating System............................................................................20
Raid Arrays ......................................................................................20
How RAID Works.............................................................................20
6.1
6.2
6.3
UEFI BIOS .........................................................................................24
Software............................................................................................27
BIOS Update.....................................................................................36
7.1
7.2
7.3
7.4
7.5
Driver Installation Note .................................................................41
Extra Information ...........................................................................42
AMI BIOS Beep Code.......................................................................43
AMI BIOS Post Code ........................................................................43
Troubleshooting...............................................................................45
Chapter 2: Hardware Installation .................................. 5
Chapter 3: Headers & Jumpers Setup ......................... 13
Chapter 4: AMD DUAL Graphics Technology ................. 18
Chapter 5: RAID Functions........................................... 20
Chapter 6: UEFI BIOS & Software ................................ 24
Chapter 7: Useful Help ................................................. 41
Appendix: SPEC In Other Languages ........................... 46
Arabic ....................................................................................................................46
French....................................................................................................................48
German .................................................................................................................50
Italian ....................................................................................................................52
Japanese................................................................................................................54
Polish .....................................................................................................................56
Portuguese............................................................................................................58
Russian ..................................................................................................................60
Spanish ..................................................................................................................62
Hi-Fi A85W/Hi-Fi A75W
CHAPTER 1: INTRODUCTION
1.1
BEFORE YOU START
Thank you for choosing our product. Before you start installing the
motherboard, please make sure you follow the instructions below:
„
Prepare a dry and stable working environment with
sufficient lighting.
„
Always disconnect the computer from power outlet
before operation.
„
Before you take the motherboard out from anti-static
bag, ground yourself properly by touching any safely
grounded appliance, or use grounded wrist strap to
remove the static charge.
„
Avoid touching the components on motherboard or the
rear side of the board unless necessary. Hold the board
on the edge, do not try to bend or flex the board.
„
Do not leave any unfastened small parts inside the
case after installation. Loose parts will cause short
circuits which may damage the equipment.
„
Keep the computer from dangerous area, such as heat
source, humid air and water.
„
The operating temperatures of the computer should be
0 to 45 degrees Celsius.
1.2
PACKAGE CHECKLIST
„
Serial ATA Cable x4
„
Rear I/O Panel for ATX Case x1
„
User’s Manual x1
„
Fully Setup Driver DVD x1
Note: The package contents may be different due to the sales region or models in which it was sold.
For more information about the standard package in your region, please contact your dealer or sales
representative.
1
Motherboard Manual
1.3
MOTHERBOARD FEATURES
Specifications
Socket FM2 for AMD A-series/ E2-series processor
CPU Support
Maximum CPU TDP (Thermal Design Power): 100Watt
Chipset
AMD A85 FCH (Hi-Fi A85W)
* Please refer to www.biostar.com.tw for CPU support list.
AMD A75 FCH (Hi-Fi A75W)
Supports Dual Channel DDR3 800/ 1066/ 1333/ 1600/ 1866/ 2133(OC)
Memory
4 x DDR3 DIMM Memory Slot, Max. Supports up to 64 GB Memory
Each DIMM supports non-ECC 512MB/ 1/ 2/ 4/ 8/ 16 GB DDR3 module
* Please refer to www.biostar.com.tw for Memory support list.
Storage
LAN
Audio Codec
USB
AMD A85 FCH
AMD A75 FCH
8x SATA 6Gb/s Connector
6x SATA 6Gb/s Connector
Supports RAID 0,1,10,5 & AHCI
Supports RAID 0,1,10 & AHCI
Realtek RTL 8111F
10/ 100/ 1000 Mb/s auto negotiation, Half / Full duplex capability
ALC892
7.1 Channels, High Definition Audio, Biostar Hi-Fi
4x USB 3.0 port (2 on rear I/Os and 2 via internal headers)
8x USB 2.0 port (4 on rear I/Os and 4 via internal headers)
2x PCI Slot
Expansion Slots
2x PCIe 2.0 x1 Slot
2x PCIe 2.0 x16 Slot (x16, x4)
1x PS/2 Keyboard/ Mouse
1x HDMI Port
1x VGA Port
Rear I/Os
1x DVI Port
1x LAN port
4x USB 2.0 Port
2x USB 3.0 Port
6x Audio Jack
Internal I/Os
2
Hi-Fi A85W:
Hi-Fi A75W:
8x SATA 6.0Gb/s Connector
6x SATA 6.0Gb/s Connector
2x USB 2.0 Header
2x USB 2.0 Header
(each header supports 2 USB 2.0 ports)
(each header supports 2 USB 2.0 ports)
1x USB 3.0 Header
1x USB 3.0 Header
(each header supports 2 USB 3.0 ports)
(each header supports 2 USB 3.0 ports)
1x 4-Pin Power Connector
1x 4-Pin Power Connector
1x 24-Pin Power Connector
1x 24-Pin Power Connector
1x CPU Fan Connector
1x CPU Fan Connector
2x System Fan Connector
2x System Fan Connector
1x Front Panel Header
1x Front Panel Header
1x Front Audio Header
1x Front Audio Header
1x Clear CMOS Header
1x Clear CMOS Header
1x Consumer IR Header
1x Consumer IR Header
1x Serial Port Header
1x Serial Port Header
1x S/PDIF out Connector
1x S/PDIF out Connector
Hi-Fi A85W/Hi-Fi A75W
Specifications
Form Factor
ATX Form Factor, 305mm x 235 mm
Windows XP / Vista / 7/ 8
OS Support
1.4
Note 1:
Note 2:
Note 3:
Note 4:
Biostar reserves the right to add or remove support for any OS with or without notice.
REAR PANEL CONNECTORS
HDMI / DVI-D / VGA Output require an AMD family processor with intedrated graphics.
The mainboard supports three independent display outputs.
Since the audio chip supports High Definition Audio Specification, the function of each
audio jack can be defined by software. The input / output function of each audio jack listed
above represents the default setting. However, when connecting external microphone to
the audio port, please use the Line In (Blue) and Mic In (Pink) audio jack.
Maximum resolution:
Outputs
HDMI
DVI-D
VGA
Maximum resolution
1920 x 1080 @60Hz
1920 x 1200 @60Hz
1920 x 1200 @60Hz
2560 x 1600 @60Hz
1920 x 1600 @60Hz
Bit Depth
24, 30, 36 bpp
24 bpp
30 bpp
24 bpp
--
3
Motherboard Manual
1.5
MOTHERBOARD LAYOUT
st
Note: ■ represents the 1 pin.
4
Hi-Fi A85W/Hi-Fi A75W
CHAPTER 2: HARDWARE INSTALLATION
2.1
INSTALLING CENTRAL PROCESSING UNIT (CPU)
Step 1: Pull the socket locking out from the socket and then raise the
lever up to a 90-degree angel.
Step 2: Look for the white triangle on socket, and the gold triangle on
CPU should point towards this white triangle. The CPU will fit only
in the correct orientation.
5
Motherboard Manual
Step 3: Hold the CPU down firmly, and then close the lever to locked the
position
Step 4: Put the CPU Fan on the CPU and buckle it. Connect the CPU
FAN power cable to the CPU_FAN1. This completes the
installation.
6
Hi-Fi A85W/Hi-Fi A75W
2.2
FAN HEADERS
These fan headers support cooling-fans built in the computer. The fan
cable and connector may be different according to the fan manufacturer.
Connect the fan cable to the connector while matching the black wire to
pin#1.
CPU_FAN1: CPU Fan Header
Pin
1
2
3
4
Assignment
Ground
+12V
FAN RPM rate sense
Smart Fan Control
(By Fan)
SYS_FAN1/2: System Fan Header
Pin
1
2
3
Assignment
Ground
+12V
FAN RPM rate sense
Note:
CPU_FAN1, SYS_FAN1/2 support 4-pin and 3-pin head connectors. When connecting
with wires onto connectors, please note that the red wire is the positive and should be
connected to pin#2, and the black wire is Ground and should be connected to GND.
7
Motherboard Manual
2.3
INSTALLING SYSTEM MEMORY
A. DDR3 Modules
1.
8
Unlock a DIMM slot by pressing the retaining clips outward. Align a
DIMM on the slot such that the notch on the DIMM matches the
break on the slot.
2.
Hi-Fi A85W/Hi-Fi A75W
Insert the DIMM vertically and firmly into the slot until the retaining
chip snap back in place and the DIMM is properly seated.
Note:
If the DIMM does not go in smoothly, do not force it. Pull it all the way out and try again.
B. Memory Capacity
DIMM Socket
Location
DDR3 Module
DDR3_A1
512MB/1GB/2GB/4GB/8GB/16GB
DDR3_A2
512MB/1GB/2GB/4GB/8GB/16GB
DDR3_B1
512MB/1GB/2GB/4GB/8GB/16GB
DDR3_B2
512MB/1GB/2GB/4GB/8GB/16GB
Total Memory Size
Max is 64GB.
C. Dual Channel Memory Installation
Please refer to the following requirements to activate Dual Channel function:
Install memory module of the same density in pairs, shown in the table.
Dual Channel Status
DDR3_A1
DDR3_A2
DDR3_B1
DDR3_B2
Enabled
O
X
O
X
Enabled
X
O
X
O
Enabled
O
O
O
O
(O means memory installed, X means memory not installed.)
Note:
The DRAM bus width of the memory module must be the same (x8 or x16)
D. DDR Speed Support
Please refer to the following table for DDR speed reference: (x = 1 or 2)
# of DIMM
per Channel
# of Ranks
per DIMM
1 of 2 UDIMMs
xR, 0
DDR3-1866
DDR3-1600
DDR3-1333
2 of 2 UDIMMs
1R, 1R
DDR3-1866
DDR3-1600
DDR3-1333
2 of 2 UDIMMs
2R, xR
DDR3-1600
DDR3-1333
DDR3-1066
1.50V
1.35V
1.25V
9
Motherboard Manual
2.4 CONNECTORS AND SLOTS
ATXPWR1: ATX Power Source Connector
This connector allows user to connect 24-pin power connector on the ATX
power supply.
Pin
Assignment
Pin
Assignment
13
14
15
16
17
18
19
20
21
22
23
24
+3.3V
-12V
Ground
PS_ON
Ground
Ground
Ground
NC
+5V
+5V
+5V
Ground
1
2
3
4
5
6
7
8
9
10
11
12
+3.3V
+3.3V
Ground
+5V
Ground
+5V
Ground
PW_OK
Standby Voltage+5V
+12V
+12V
+3.3V
ATXPWR2: ATX Power Source Connector
This connector will provide +12V to CPU power circuit.
Pin
1
2
3
4
Assignment
+12V
+12V
Ground
Ground
Note1: Before you power on the system, please make sure that both ATXPWR1 and
ATXPWR2 connectors have been plugged-in.
Note2: Insufficient power supplied to the system may result in instability or the peripherals
not functioning properly. Use of a PSU with a higher power output is recommended when
configuring a system with more power-consuming devices.
10
Hi-Fi A85W/Hi-Fi A75W
PEX1_1/1_2: PCI-Express Gen2 x1 Slot
-
PCI-Express 2.0 compliant.
Data transfer bandwidth up to 500MB/s per direction; 1GB/s in total
PCI1/2: Peripheral Component Interconnect Slot
This motherboard is equipped with 2 standard PCI slots. PCI stands for
Peripheral Component Interconnect, and it is a bus standard for expansion
cards.
PEX16_1: PCI-Express Gen2 x16 Slot
-
PCI-Express 2.0 compliant.
Maximum theoretical realized bandwidth of 8GB/s simultaneously per
direction, for an aggregate of 16GB/s totally.
PEX16_2: PCI-Express Gen2 x4 Slot
-
PCI-Express 2.0 compliant.
Data transfer bandwidth up to 2GB/s per direction; 4GB/s in total.
11
Motherboard Manual
SATA1~SATA4: Serial ATA Connectors
These connectors connect to SATA hard disk drives via SATA cables.
Hi-Fi A85W supports 8 SATA 3.0 connectors.
Hi-Fi A75W supports 6 SATA 3.0 connectors.
Pin
1
2
3
4
5
6
7
12
Assignment
Ground
TX+
TXGround
RXRX+
Ground
Hi-Fi A85W/Hi-Fi A75W
CHAPTER 3: HEADERS & JUMPERS SETUP
3.1
HOW TO SETUP JUMPERS
The illustration shows how to set up jumpers. When the jumper cap is
placed on pins, the jumper is “close”, if not, that means the jumper is
“open”.
Pin opened
3.2
Pin closed
Pin1-2 closed
DETAIL SETTINGS
PANEL1: Front Panel Header
This 16-pin connector includes Power-on, Reset, HDD LED, Power LED, and
speaker connection. It allows user to connect the PC case’s front panel switch
functions.
Pin
1
2
3
4
5
6
7
8
Assignment
+5V
N/A
N/A
Speaker
HDD LED (+)
HDD LED (-)
Ground
Reset control
Function
Speaker
Connector
Hard drive
LED
Reset button
Pin
9
10
11
12
13
14
15
16
Assignment
N/A
N/A
N/A
Power LED (+)
Power LED (+)
Power LED (-)
Power button
Ground
Function
N/A
N/A
Power LED
Power-on button
13
Motherboard Manual
JFRONT_USB3_1: Header for USB 3.0 Ports at Front Panel
This header allows user to connect additional USB cable on the PC front panel,
and also can be connected with a wide range of simultaneously accessible
external Plug and Play peripherals.
Pin
1
2
3
4
5
6
7
8
9
10
Assignment
VBUS0
SSRX1SSRX1+
Ground
SSTX1SSTX1+
Ground
D1D1+
ID
Pin
11
12
13
14
15
16
17
18
19
20
Assignment
D2+
D2Ground
SSTX2+
SSTX2Ground
SSRX2+
SSRX2VBUS1
Key
F_USB1/F_USB2: Headers for USB 2.0 Ports at Front Panel
This header allows user to connect additional USB cable on the PC front panel,
and also can be connected with a wide range of simultaneously accessible
external Plug and Play peripherals.
Pin
1
2
3
4
5
6
7
8
9
10
14
Assignment
+5V (fused)
+5V (fused)
USBUSBUSB+
USB+
Ground
Ground
NC
Key
Hi-Fi A85W/Hi-Fi A75W
F_AUDIO1: Front Panel Audio Header
This header allows user to connect the front audio output cable with the PC front
panel. This header supports HD and AC’97 audio front panel connector.
HD Audio
Pin
Assignment
1
Mic Left in
2
Ground
3
Mic Right in
4
GPIO
5
Right line in
6
Jack Sense
7
Front Sense
8
Key
9
Left line in
10
Jack Sense
AC’97
Pin
1
2
3
4
5
6
7
8
9
10
Assignment
Mic In
Ground
Mic Power
Audio Power
RT Line Out
RT Line Out
Reserved
Key
LFT Line Out
LFT Line Out
Note1: It is recommended that you connect a high-definition front panel audio module to
this connector to avail of the motherboard's high definition audio capability.
Note2: Please try to disable the "Front Panel Jack Detection" if you want to use an
AC'97 front audio output cable. The function can be found via O.S. Audio Utility.
JSPDIFOUT1: Digital Audio-out Connectors
The JSPDIFOUT1 is for connecting the PCI bracket SPDIF output.
Pin
1
2
3
Assignment
+5V
SPDIF_OUT
Ground
15
Motherboard Manual
JCMOS1: Clear CMOS Header
Placing the jumper on pin2-3, it allows user to restore the BIOS safe setting and
the CMOS data. Please carefully follow the procedures to avoid damaging the
motherboard.
1
3
Pin 1-2 Close:
Normal Operation (default).
1
3
Pin 2-3 Close:
Clear CMOS data.
※ Clear CMOS Procedures:
1.
2.
3.
4.
5.
6.
Remove AC power line.
Set the jumper to “Pin 2-3 close”.
Wait for five seconds.
Set the jumper to “Pin 1-2 close”.
Power on the AC.
Load Optimal Defaults and save settings in CMOS.
J_COM1: Serial Port Connector
The motherboard has a Serial Port Connector for connecting RS-232 Port.
16
Pin
Assignment
1
2
3
4
5
6
7
8
9
10
Carrier detect
Received data
Transmitted data
Data terminal
Signal ground
Data set ready
Request to send
Clear to send
Ring indicator
NC
Hi-Fi A85W/Hi-Fi A75W
CIR1: Consumer IR Connector
This header is for infrared remote control and communication.
Pin
1
2
3
4
5
6
Assignment
IrDA serial input
Ground
Ground
Key
IrDA serial output
IR Power
On-Board Buttons
There are 2 on-board buttons.
SW_PWR1:
This is an on-board
Power Switch button.
SW_RST1:
This is an on-board
Reset button.
BIOS POST Code/CPU Temperature Indicator
This indicator will show POST code while booting. After the booting sequence,
it will show current CPU temperature. Please refer to Chapter 7.4 for all the
BIOS POST codes.
17
Motherboard Manual
CHAPTER 4: AMD DUAL GRAPHICS TECHNOLOGY
4.1
AMD DUAL GRAPHICS TECHNOLOGY INTRODUCTION
When user adds a PCIE display adapter, it can be integrated with IGD to show
better performance. To make the two video devices work simultaneously and
normally, please refer to the following setting.
4.2
AMD DUAL GRAPHICS REQUIREMENT
„
Operating System: Windows Vista / Windows 7 / Windows 8
„
Supported Dual Graphics Combinations:
AMD Radeon™ Graphics Card
A10-Series
HD 7660D
A8-Series
HD7560D
HD 6670
●
●
HD 6570
●
●
HD 6450
A6-Series
HD 7540D
●
●
● Recommended graphics cards for AMD dual-graphics
Note 1: A4-Series products do not support Dual Graphics.
Note 2: The information described above in this manual is for your reference only and the
actual information and settings on board may be different from this manual. For further AMD
Dual Graphics information, please visit the following website: http://www.amd.com
18
Hi-Fi A85W/Hi-Fi A75W
4.3
AMD DUAL GRAPHICS SETUP
Step 1: Insert Dual Graphics-Ready graphics card into PEX16_1 slot.
Step 2: Set the BIOS setting as follows:
[Chipset]→[North Bridge]→[Surround View]→[Enabled]
Step 3: Install Driver DVD Chipset Driver, and reboot the system. Activate AMD
VISION Engine Control Center to make sure CrossFire has been
enabled.
19
Motherboard Manual
CHAPTER 5: RAID FUNCTIONS
5.1
OPERATING SYSTEM
Supports Windows Vista, Windows 7 and Windows 8.
5.2
RAID ARRAYS
RAID supports the following types of RAID arrays:
RAID 0: RAID 0 defines a disk striping scheme that improves disk read and write
times for many applications.
RAID 1: RAID 1 defines techniques for mirroring data.
RAID 10: RAID 10 combines the techniques used in RAID 0 and RAID 1.
RAID 5: RAID 5 provides fault tolerance and better utilization of disk capacity.
5.3
HOW RAID WORKS
RAID 0:
The controller “stripes” data across multiple drives in a RAID 0 array system. It
breaks up a large file into smaller blocks and performs disk reads and writes
across multiple drives in parallel. The size of each block is determined by the
stripe size parameter, which you set during the creation of the RAID set based on
the system environment. This technique reduces overall disk access time and
offers high bandwidth.
Features and Benefits
­
­
­
­
­
­
Drives: Minimum 2, and maximum is up to 6 or 8. Depending on the
platform.
Uses: Intended for non-critical data requiring high data throughput, or any
environment that does not require fault tolerance.
Benefits: provides increased data throughput, especially for large files. No
capacity loss penalty for parity.
Drawbacks: Does not deliver any fault tolerance. If any drive in the array
fails, all data is lost.
Fault Tolerance: No.
Total Capacity: (Minimal. HDD Capacity) x (Connected HDDs Amount)
Block 1
Block 3
Block 5
20
Block 2
Block 4
Block 6
Hi-Fi A85W/Hi-Fi A75W
RAID 1:
Every read and write is actually carried out in parallel across 2 disk drives in a
RAID 1 array system. The mirrored (backup) copy of the data can reside on the
same disk or on a second redundant drive in the array. RAID 1 provides a
hot-standby copy of data if the active volume or drive is corrupted or becomes
unavailable because of a hardware failure.
RAID techniques can be applied for high-availability solutions, or as a form of
automatic backup that eliminates tedious manual backups to more expensive and
less reliable media.
Features and Benefits
­
­
­
­
­
Drives: Minimum 2, and maximum is 2.
Uses: RAID 1 is ideal for small databases or any other application that
requires fault tolerance and minimal capacity.
Benefits: Provides 100% data redundancy. Should one drive fail, the
controller switches to the other drive.
Drawbacks: Requires 2 drives for the storage space of one drive.
Performance is impaired during drive rebuilds.
Fault Tolerance: Yes.
Block 1
Block 2
Block 3
Block 1
Block 2
Block 3
21
Motherboard Manual
RAID 10:
RAID 1 drives can be stripped using RAID 0 techniques.Resulting in a RAID 10
solution for improved resiliency, performance and rebuild performance.
Features and Benefits
­
­
­
­
Drives: Minimum 4, and maximum is 6 or 8, depending on the platform.
Benefits: Optimizes for both fault tolerance and performance, allowing for
automatic redundancy. May be simultaneously used with other RAID levels
in an array, and allows for spare disks.
Drawbacks: Requires twice the available disk space for data redundancy,
the same as RAID level 1.
Fault Tolerance: Yes.
Block 1
Block 3
Block 5
22
Block 1
Block 3
Block 5
Block 2
Block 4
Block 6
Block 2
Block 4
Block 6
Hi-Fi A85W/Hi-Fi A75W
RAID 5:
RAID 5 stripes both data and parity information across three or more drives. It
writes data and parity blocks across all the drives in the array. Fault tolerance is
maintained by ensuring that the parity information for any given block of data is
placed on a different drive from those used to store the data itself.
Note: The RAID 5 function is supported by A85 chipset only.
Features and Benefits
­
­
­
­
­
Drives: Minimum 3.
Uses: RAID 5 is recommended for transaction processing and general
purpose service.
Benefits: An ideal combination of good performance, good fault tolerance,
and high capacity and storage efficiency.
Drawbacks: Individual block data transfer rate same as a single disk. Write
performance can be CPU intensive.
Fault Tolerance: Yes.
Disk 1
DATA 1
DATA 3
PARITY
DATA 7
DATA 9
PARITY
Disk 2
DATA 2
PARITY
DATA 5
DATA 8
PARITY
DATA 11
Disk 3
PARITY
DATA 4
DATA 6
PARITY
DATA 10
DATA 12
23
Motherboard Manual
CHAPTER 6: UEFI BIOS & SOFTWARE
6.1
UEFI BIOS
UEFI BIOS Features
„
Overclocking Navigator Engine (O.N.E.)
„
Self Recovery System (S.R.S)
„
Smart Fan Function
„
BIO-Flasher: Update UEFI BIOS file from USB Flash Drive
!! WARNING !!
For better system performance, the UEFI BIOS firmware is being
continuously updated. The UEFI BIOS information described below in
this manual is for your reference only and the actual UEFI BIOS
information and settings on board may be different from this manual.
For further information of setting up the UEFI BIOS, please refer to
the UEFI BIOS Manual in the Setup DVD.
A. Overclocking Navigator Engine (O.N.E.)
O.N.E provides 4 systems allowing users to customize personal overclock
settings: Manual Voltage System, Manual Memory System, Manual MCT
System, and Manual G.P.U System.
Note:
Not all types of CPU perform above overclock setting ideally; the difference will be based on
the selected CPU model.
24
Hi-Fi A85W/Hi-Fi A75W
Note:
Overclock is an optional process, but not a “must-do” process; it is not recommended for
inexperienced users.
Therefore, we will not be responsible for any hardware damage
which may be caused by overclocking. We also would not guarantee any overclocking
performance.
B. Self Recovery System (S.R.S.)
This function can’t be seen under UEFI BIOS setup, and is always on whenever
the system starts up.
However, it can prevent system hang-up due to inappropriate overclock
actions.
When the system hangs up, S.R.S. will automatically log in the default UEFI
BIOS setting, and all overclock settings will be re-configured.
C. Smart Fan Function
Smart Fan Function is under “Smart Fan Control” in “Advanced Menu”.
This is a brilliant feature to control CPU/System Temperature vs. Fan speed.
When enabling Smart Fan function, Fan speed is controlled automatically by
CPU/System temperature.
This function will protect CPU/System from overheat problem and maintain the
system temperature at a safe level.
↓
25
Motherboard Manual
CPU Smart FAN
This item allows you to control the CPU Smart Fan function.
CPU FAN Calibrate
Press [ENTER] to calibrate CPU FAN.
Control Mode
This item provides several operation modes of the fan.
Fan Ctrl OFF(℃)
When CPU temperature is lower than this value, the CPU fan will keep
lowest RPM. The range is from 0~50, with an interval of 1.
Fan Ctrl On(℃)
When CPU temperature is higher than this value, the CPU fan controller
will turn on. The range is from 0~70, with an interval of 1.
Fan Ctrl Start Value
This item sets CPU FAN Start Speed Value. The range is from 0~255, with
an interval of 1.
Fan Ctrl Sensitive
The bigger the numeral is, the higher the FAN speed is. The range is from
1~255, with an interval of 1.
26
Hi-Fi A85W/Hi-Fi A75W
6.2
SOFTWARE
Installing Software
1. Insert the Setup DVD to the optical drive. The driver installation program
would appear if the Auto-run function has been enabled.
2. Select Software Installation, and then click on the respective software
title.
3. Follow the on-screen instructions to complete the installation.
Launching Software
After the installation process is completed, you will see the software icon
showing on the desktop. Double-click the icon to launch it.
TOverclocker
TOverclocker presents a simple Windows-based system performance
enhancement and manageability utility. It features several powerful and easy
to use tools such as Overclocking for enhancing system performance, also for
special enhancement on CPU and Memory. Smart-Fan management and PC
health are for monitoring system status.This utility also allows you to make
overclocking profiles saving unlimitedly, and pre-set OC modes are for easy
OC. (The screenshot below is for reference only)
27
Motherboard Manual
The CPU tab provides information on the CPU and motherboard.
The Memory tab provides information on the memory module(s).
You can select memory module on a specific slot to see its information.
The OC Tweaker tab allows you to change system clock settings and voltages
settings. It also provides six pre-set modes for you: (The screenshot below is
for reference only)
28
Hi-Fi A85W/Hi-Fi A75W
Six Pre-set Modes: V3, V6, V9, V12, V15, AUTO for different overclocking
experience. (The screenshot below is for reference only)
The HW Monitor tab allows you to monitor hardware voltage, fan speed, and
temperature. Besides, you also can set related values for CPU Smart Fan.
(The screenshot below is for reference only)
29
Motherboard Manual
Pressing TOVERCLOCKER logo
will display information about
manufacturer and software version.
You can update currnet version by
clicking the button “Live Update.”
Green Power II Utility
BIOSTAR G.P.U II (Green Power Utility) is a new function. The utility enhances
energy efficiency by disabling extra phases while CPU is on light loading; it
features 4+1 power phases, current power saving, and toal power saving. This
tool integrates a friendly GUI to monitor your CPU Usage, CPU Watt, and CPU
Temperature. Moreover, it optimizes power saving and best power efficiency
on your system. (The illustration below is for reference only)
Typical Mode
Display manufacturer &
software version information
Performance
Mode
Medium Mode
Maxi-Energy Mode
Auto Phase Mode
Reset Time &
Consumption
Display CPU
information
30
Hi-Fi A85W/Hi-Fi A75W
G.P.U Mode Setting
This utility provides five modes, upon your requirements, to improve
system performance or to save power consumption.
Note:
Even if the modes saving more power consumption are chosen, the system still can keep
excellent performance.
„
Auto Phase Mode
System switches the mode automatically according to current system
loading condition.
„
Performance Mode
This is the mode saving power consumption most. Least energy will
be used in the system.
„
Typical Mode
Compared with that in Performance Mode, energy consumption in this
mode is a little bit more.
„
Medium Mode
This is the standard system power saving mode.
„
Maxi-Energy Mode
This is the best system performance mode.
31
Motherboard Manual
Smart EAR
Smart EAR is a windows-based audio utility which allows you to easily
adjust system volume. With its user-friendly GUI, you can also adjust
impedance setting (Low/High Gain) to optimize your headphone
performance.
z
High/Low Gain Switch: Keep the gain switch to low for low impedance
headphone and set to high for high impedance headphone.
z
Mute Button: To disable system sound
z
Volume Control Knob: The volume can be finely adjusted by turning the
knob either clockwise or anti-clockwise to increase or decrease system
volume accordingly.
z
Information Button: Get information of the application
z
Minimize Button: Minimize the application window to the taskbar
z
Exit Button: Exit the application
Note:
1. Smart EAR is only supported by Windows 7 and BIOSTAR Hi-Fi series motherboards.
2. High/Low Gain Switch is only for “Front Panel Audio Header”, please make sure you are
connecting your headphone to the front panel I/O.
32
Hi-Fi A85W/Hi-Fi A75W
eHot-Line (Optional)
eHot-Line is a convenient utility that helps you to contact with our
Tech-Support system. This utility will collect the system information which is
useful for analyzing the problem you may have encountered, and then send
these information to our tech-support department to help you fix the problem.
Before you use this utility, please set Outlook Express as your default e-mail client application program.
represents important
information that you
must provide. Without
this information, you may
not be able to send out
the mail.
*
This block will show
the information which
would be collected in
the mail.
condition
*Describe
of your system.
your area or
*Select
the area close to you.
Provide the e-mail
address that you would
like to send the copy to.
the name of
*Provide
the memory module
manufacturer.
Provide the name of
the power supply
manufacturer and the
model no.
Send the mail out.
Exit this dialog.
Save these information to a .txt file
After filling up this information, click “Send”
to send the mail out. A warning dialog would
appear asking for your confirmation; click
“Send” to confirm or “Do Not Send” to cancel.
If you want to save this information to a .txt file, click “Save As…” and then you
will see a saving dialog appears asking you to enter file name.
33
Motherboard Manual
Enter the file name and then click
“Save”. Your system information
will be saved to a .txt file.
Open the saved .txt file, you will
see your system information
including
motherboard/BIOS/CPU/video/
device/OS information. This
information is also concluded in
the sent mail.
We will not share customer’s data with any other third parties, so please feel free
to provide your system information while using eHot-Line service.
If you are not using Outlook Express as your default e-mail client application, you may
need to save the system information to a .txt file and send the file to our tech support
with other e-mail application. Go to the following web
http://www.biostar.com.tw/app/en/about/contact.php for getting our contact
information.
34
Hi-Fi A85W/Hi-Fi A75W
BIOScreen Utility (Optional)
This utility allows you to personalize your boot logo easily. You can choose
BMP as your boot logo so as to customize your computer.
Please follow the following instructions to update boot logo:
1. Load Image:Choose the picture as the boot logo.
2. Transform:Transform the picture for BIOS and preview the result.
3. Update Bios:Write the picture to BIOS Memory to complete the update.
35
Motherboard Manual
6.3 BIOS UPDATE
There are three ways to update the BIOS:
BIOS Update Utility, BIOS Online Update Utility and BIOS Flasher.
1. BIOS Update Utility
1. Installing BIOS Update Utility from the DVD Driver.
2. Download the proper BIOS from www.biostar.com.tw .
3. Open BIOS Update Utility and
click the Update BIOS button on the
main screen.
4. A warning message will show up
to request your agreement to start
the BIOS update. Click OK to start
the update procedure.
5. Choose the location for your
BIOS file in the system. Please
select the proper BIOS file, and then
click on Open. It will take several
minutes, please be patient.
6. After the BIOS Update process is
finished, click on OK to reboot the
system.
36
Hi-Fi A85W/Hi-Fi A75W
7. While the system boots up and the full screen logo shows up, please press
the
<Delete> key to enter BIOS setup.
After entering the BIOS setup, please go to the Save & Exit, using the Restore
Defaults function to load Optimized Defaults, and select Save Changes and
Reset to restart the computer. Then, the BIOS Update is completed.
Backup BIOS
Click the Backup BIOS button on
the main screen for the backup of
BIOS, and select a proper location
for your backup BIOS file in the
system, and click Save.
2. Online Update Utility
1. Installing BIOS Update Utility from the DVD Driver.
2. Please make sure the system is connected to the internet before using this
function.
3. Open BIOS Update Utility and
click the Online Update button
on the main screen.
4. An open dialog will show up to
request your agreement to
start the BIOS update. Click
Yes to start the online update
procedure.
37
Motherboard Manual
5. If there is a new BIOS version,
the utility will ask you to
download it. Click Yes to
proceed.
6. After the download is
completed, you will be asked
to program (update) the BIOS
or not. Click Yes to proceed.
7. After the updating process is
finished, you will be asked you
to reboot the system. Click
OK to reboot.
8. While the system boots up and the full screen logo shows up, press
<Delete> key to enter BIOS setup.
After entering the BIOS setup, please go to the Save & Exit, using the Restore
Defaults function to load Optimized Defaults, and select Save Changes and
Reset to restart the computer. Then, the BIOS Update is completed.
38
Hi-Fi A85W/Hi-Fi A75W
3. BIOSTAR BIOS Flasher
BIOSTAR BIOS Flasher is a BIOS flashing utility providing you an easy and simple
way to update your BIOS via USB pen drive.
„
This utility only allows storage device with FAT32/16 format and single
partition.
„
Shutting down or resetting the system while updating the BIOS will lead
to system boot failure.
The BIOSTAR BIOS Flasher is built in the BIOS ROM. To enter the utility, press
<F12> during the Power-On Self Tests (POST) procedure while booting up.
Updating BIOS with BIOSTAR BIOS Flasher
1. Go to the website to download the latest BIOS file for the motherboard.
2. Then, copy and save the BIOS file into a USB flash (pen) drive.
3. Insert the USB pen drive that contains the BIOS file to the USB port.
4. Power on or reset the computer and then press <F12> during the POST process.
5. After entering the POST screen,
the BIOS-FLASHER utility pops out.
Choose [fs0] to search for the BIOS
file.
6. Select the proper BIOS file, and a
message asking if you are sure to
flash the BIOS file. Click Yes to start
updating BIOS.
39
Motherboard Manual
7. A dialog pops out after BIOS flash
is completed, asking you to restart
the system. Press the [Y] key to
restart system.
8. While the system boots up and the full screen logo shows up, press
<Delete> key to enter BIOS setup.
After entering the BIOS setup, please go to the Save & Exit, using the Restore
Defaults function to load Optimized Defaults, and select Save Changes and Reset
to restart the computer. Then, the BIOS Update is completed.
All the information and content above about software are subject to be changed
without notice. For better performance, the software is being continuously updated.
The information and pictures described above are for your reference only. The actual
information and settings on board may be slightly different from this manual.
40
Hi-Fi A85W/Hi-Fi A75W
CHAPTER 7: USEFUL HELP
7.1
DRIVER INSTALLATION NOTE
After you installed your operating system, please insert the Fully Setup
Driver DVD into your optical drive and install the driver for better system
performance.
You will see the following window after you insert the DVD
The setup guide will auto detect your motherboard and operating system.
Note:
If this window didn’t show up after you insert the Driver DVD, please use file browser to
locate and execute the file SETUP.EXE under your optical drive.
A. Driver Installation
To install the driver, please click on the Driver icon. The setup guide will
list the compatible driver for your motherboard and operating system.
Click on each device driver to launch the installation program.
B. Software Installation
To install the software, please click on the Software icon. The setup guide
will list the software available for your system, click on each software title
to launch the installation program.
C. Manual
Aside from the paperback manual, we also provide manual in the Driver
DVD. Click on the Manual icon to browse for available manual.
Note:
You will need Acrobat Reader to open the manual file. Please download the latest version of
Acrobat Reader software from http://get.adobe.com/reader/
41
Motherboard Manual
7.2
EXTRA INFORMATION
CPU Overheated
If the system shutdown automatically after power on system for
seconds, that means the CPU protection function has been activated.
When the CPU is over heated, the motherboard will shutdown
automatically to avoid a damage of the CPU, and the system may not
power on again.
In this case, please double check:
1. The CPU cooler surface is placed evenly with the CPU surface.
2. CPU fan is rotated normally.
3. CPU fan speed is fulfilling with the CPU speed.
After confirmed, please follow steps below to relief the CPU protection
function.
1. Remove the power cord from power supply for seconds.
2. Wait for seconds.
3. Plug in the power cord and boot up the system.
Or you can:
1. Clear the CMOS data.
(See “Close CMOS Header: JCMOS1” section)
2. Wait for seconds.
3. Power on the system again.
42
Hi-Fi A85W/Hi-Fi A75W
7.3
AMI BIOS BEEP CODE
Boot Block Beep Codes
Number of Beeps
Continuing
Description
Memory sizing error or Memory module not found
POST BIOS Beep Codes
Number of Beeps
1
8
7.4
Description
Success booting.
Display memory error (system video adapter)
AMI BIOS POST CODE
Code
Description
10
11
15
19
2B
2C
2D
2E
2F
31
32
33
34
35
36
37
3B
4F
60
F0
F1
F2
F3
F4
E0
E1
E2
E3
60
61
62
63
68
69
PEI Core is started
Pre-memory CPU initialization is started
Pre-memory North Bridge initialization is started
Pre-memory South Bridge initialization is started
Memory initialization. Serial Presence Detect (SPD) data reading
Memory initialization. Memory presence detection
Memory initialization. Programming memory timing information
Memory initialization. Configuring memory
Memory initialization (other).
Memory Installed
CPU post-memory initialization is started
CPU post-memory initialization. Cache initialization
CPU post-memory initialization. Application Processor(s) (AP) initialization
CPU post-memory initialization. Boot Strap Processor (BSP) selection
CPU post-memory initialization. System Management Mode (SMM) initialization
Post-Memory North Bridge initialization is started
Post-Memory North Bridge initialization (North Bridge module specific)
DXE IPL is started
DXE Core is started
Recovery condition triggered by firmware (Auto recovery)
Recovery condition triggered by user (Forced recovery)
Recovery process started
Recovery firmware image is found
Recovery firmware image is loaded
S3 Resume is stared (S3 Resume PPI is called by the DXE IPL)
S3 Boot Script execution
Video repost
OS S3 wake vector call
DXE Core is started
NVRAM initialization
Installation of the South Bridge Runtime Services
CPU DXE initialization is started
PCI host bridge initialization
North Bridge DXE initialization is started
43
Motherboard Manual
Code
6A
70
71
72
78
79
90
91
92
93
94
95
96
97
98
99
9A
9B
9C
9D
A0
A1
A2
A3
A4
A5
A6
A7
A8
A9
AB
AD
AE
AF
B0
B1
B2
B3
B4
B5
B6
B7
44
Description
North Bridge DXE SMM initialization is started
South Bridge DXE initialization is started
South Bridge DXE SMM initialization is started
South Bridge devices initialization
South Bridge DXE Initialization (South Bridge module specific)
ACPI module initialization
Boot Device Selection (BDS) phase is started
Driver connecting is started
PCI Bus initialization is started
PCI Bus Hot Plug Controller Initialization
PCI Bus Enumeration
PCI Bus Request Resources
PCI Bus Assign Resources
Console Output devices connect
Console input devices connect
Super IO Initialization
USB initialization is started
USB Reset
USB Detect
USB Enable
IDE initialization is started
IDE Reset
IDE Detect
IDE Enable
SCSI initialization is started
SCSI Reset
SCSI Detect
SCSI Enable
Setup Verifying Password
Start of Setup
Setup Input Wait
Ready To Boot event
Legacy Boot event
Exit Boot Services event
Runtime Set Virtual Address MAP Begin
Runtime Set Virtual Address MAP End
Legacy Option ROM Initialization
System Reset
USB hot plug
PCI bus hot plug
Clean-up of NVRAM
Configuration Reset (reset of NVRAM settings)
Hi-Fi A85W/Hi-Fi A75W
7.5
TROUBLESHOOTING
Probable
1.
2.
Solution
There is no power in the system. 1.
Power LED does not shine; the
fan of the power supply does not 2.
work
3.
Indicator light on keyboard does
not shine.
Make sure power cable is
securely plugged in.
Replace cable.
Contact technical support.
System is inoperative. Keyboard lights Using even pressure on both ends of
are on, power indicator lights are lit,
the DIMM, press down firmly until the
and hard drives are running.
module snaps into place.
System does not boot from a hard disk 1.
drive, but can be booted from optical
drive.
2.
Check cable running from disk to
disk controller board. Make sure
both ends are securely plugged
in; check the drive type in the
standard CMOS setup.
Backing up the hard drive is
extremely important. All hard
disks are capable of breaking
down at any time.
System only boots from an optical
drive. Hard disks can be read,
applications can be used, but system
fails to boot from a hard disk.
1.
Screen message shows “Invalid
Configuration” or “CMOS Failure.”
Review system’s equipment. Make sure
correct information is in setup.
2.
System cannot boot after user installs a 1.
second hard drive.
2.
Back up data and applications
files.
Reformat the hard drive.
Re-install applications and data
using backup disks.
Set master/slave jumpers
correctly.
Run SETUP program and select
correct drive types. Call the drive
manufacturers for compatibility
with other drives.
45
‫‪Motherboard Manual‬‬
‫‪APPENDIX: SPEC IN OTHER LANGUAGES‬‬
‫‪ARABIC‬‬
‫اﻟﻤﻮاﺻﻔﺎت‬
‫اﻟﻤﺄﺧﺬ ‪ FM 2‬ﻟﻤﻌﺎﻟﺞ اﻳﻪ إم دى ‪ AMD‬ﺗﺴﻠﺴﻞ ‪ / A‬ﺗﺴﻠﺴﻞ ‪E 2‬‬
‫ﻗﺎﻋﺪة وﺣﺪة اﻟﻤﻌﺎﻟﺠﺔ اﻟﻤﺮآﺰﻳﺔ‬
‫اﻟﺤﺪ اﻷﻗﺼﻰ ﻟﻠﻄﺎﻗﺔ اﻟﺤﺮارﻳﺔ ﻓﻲ ﺗﺼﻤﻴﻢ اﻟﻤﻌﺎﻟﺞ ) ‪ 100 :( thermal design power – TDP‬واط‪.‬‬
‫* ﻳﺮﺟﻰ اﻟﺮﺟﻮع إﻟﻰ اﻟﻤﻮﻗﻊ ‪ www.biostar.com.tw‬ﻟﻘﺎﺋﻤﺔ دﻋﻢ اﻟﻤﻌﺎﻟﺞ ‪.CPU‬‬
‫ﻣﺠﻤﻮﻋﺔ اﻟﺸﺮاﺋﺢ‬
‫اﻳﻪ إم دى ‪(Hi-Fi A85W) FCH A85 AMD‬‬
‫اﻳﻪ إم دى ‪(Hi-Fi A75W) FCH A75 AMD‬‬
‫ﺗﺪﻋﻢ ﻗﻨﺎة ﻣﺰدوﺟﺔ دي‪ .‬دي‪ .‬ار‪(OC)2133 /1866 / 1600 / 1333 / 1066 / 800 DDR3 .‬‬
‫اﻟﺬاآﺮة‬
‫‪ 4x‬دي‪ .‬دي‪ .‬ار‪ DDR3 .‬ﻓﺘﺤﺎت اﻟﺬاآﺮة اﻟﻤﺰدوﺟﺔ ‪ ،DIMM‬ﺗﺘﺤﻤﻞ آﺤﺪ أﻗﺼﻰ ‪ 64‬ﺟﻴﺠﺎﺑﺎﻳﺖ ذاآﺮة‬
‫آﻞ ﻓﺘﺤﺔ ﻣﺰدوﺟﺔ ‪ DIMM‬ﺗﺘﺤﻤﻞ دون ‪ 512 ECC‬ﻣﻴﺠﺎ ﺑﺎﻳﺖ ‪ 16/8/4/2/1/‬ﺟﻴﺠﺎﺑﺎﻳﺖ دي‪ .‬دي‪ .‬ار ‪DDR3‬‬
‫* ﻳﺮﺟﻰ اﻟﺮﺟﻮع إﻟﻰ اﻟﻤﻮﻗﻊ ‪ www.biostar.com.tw‬ﻟﻘﺎﺋﻤﺔ دﻋﻢ اﻟﺬاآﺮة‪.‬‬
‫اﻟﺘﺨﺰﻳﻦ‬
‫اﻳﻪ إم دى ‪: FCH A85 AMD‬‬
‫اﻳﻪ إم دى ‪: FCH A75 AMD‬‬
‫وﺻﻠﺔ ‪ x 8‬ﺳﺎﺗﺎ ‪ 6 SATA‬ﺟﻴﺠﺎ ﺑﺎﻳﺖ ‪ /‬اﻟﺜﺎﻧﻴﺔ‬
‫وﺻﻠﺔ ‪ x 6‬ﺳﺎﺗﺎ ‪ 3 SATA‬ﺟﻴﺠﺎ ﺑﺎﻳﺖ ‪ /‬اﻟﺜﺎﻧﻴﺔ‬
‫ﺗﺘﺤﻤﻞ راﻳﺪ ‪10 / 5 / 1 / 0 RAID‬‬
‫ﺗﺘﺤﻤﻞ راﻳﺪ ‪10 / 1 / 0 RAID‬‬
‫رﻳﻴﺎﻟﺘﻴﻚ رت ل ‪REALTEK RTL 8111 F‬‬
‫ﺷﺒﻜﺔ ﻣﺤﻠﻴﺔ ‪LAN‬‬
‫‪ 1000 / 100 / 10‬ﻣﻴﺠﺎﺑﺎﻳﺖ ‪ /‬اﻟﺜﺎﻧﻴﺔ ‪ ،‬ﺗﺤﺪﻳﺪ ﺗﻠﻘﺎﺋﻲ ‪ ،‬اﻟﻨﺼﻒ ‪ /‬اﻟﻘﺪرة اﻟﻘﺼﻮى اﻟﻤﺰدوﺟﺔ‬
‫‪ALC892‬‬
‫اﻟﺘﺮﻣﻴﺰ اﻟﺼﻮﺗﻲ‬
‫ﻧﺎﻗﻞ ﻣﺘﺴﻠﺴﻞ ﻋﺎم ‪USB‬‬
‫‪ 7.1‬ﻗﻨﻮات ﻋﺎﻟﻴﺔ اﻟﺪﻗﺔ‪Biostar Hi-Fi,‬‬
‫ﻣﻨﺎﻓﺬ ‪ x 4‬ﻧﺎﻗﻞ ﻣﺘﺴﻠﺴﻞ ﻋﺎم ‪ 2 ) 3.0 USB‬ﻓﻲ اﻟﻤﺪاﺧﻞ واﻟﻤﺨﺎرج اﻟﺨﻠﻔﻴﺔ و ‪ 2‬ﻣﻦ ﺧﻼل اﻟﻤﻮزع اﻟﺪاﺧﻠﻲ (‬
‫ﻣﻨﺎﻓﺬ ‪ x 8‬ﻧﺎﻗﻞ ﻣﺘﺴﻠﺴﻞ ﻋﺎم ‪ 4 ) 2.0 USB‬ﻓﻲ اﻟﻤﺪاﺧﻞ واﻟﻤﺨﺎرج اﻟﺨﻠﻔﻴﺔ و ‪ 4‬ﻣﻦ ﺧﻼل اﻟﻤﻮزع اﻟﺪاﺧﻠﻲ (‬
‫‪ x 2‬ﻓﺘﺤﺔ ﻣﻨﻔﺬ اﻟﻤﻠﺤﻘﺎت اﻹﺿﺎﻓﻴﺔ ‪PCI‬‬
‫ﻓﺘﺤﺎت اﻟﺘﻮﺳﻊ‬
‫‪ x 2‬ﻓﺘﺤﺔ ﻣﻨﻔﺬ اﻟﻤﻠﺤﻘﺎت اﻹﺿﺎﻓﻴﺔ ‪1 x 2.0 PCIe‬‬
‫‪ x 2‬ﻓﺘﺤﺔ ﻣﻨﻔﺬ اﻟﻤﻠﺤﻘﺎت اﻹﺿﺎﻓﻴﺔ ‪(x16, x4)16 x 2.0 PCIe‬‬
‫‪ PS/2 x 1‬ﻟﻮﺣﺔ اﻟﻤﻔﺎﺗﻴﺢ ﻟﻠﻜﻤﺒﻴﻮﺗﺮ‪/‬اﻟﻔﺎرة‬
‫ﻓﺘﺤﺔ ﺗﻮﺻﻴﻞ ﻋﺪد ‪ HDMI x 1‬وﺳﻴﻂ ﻣﺘﻌﺪد اﻟﻌﺎﻟﻲ اﻟﻮﺿﻮح‬
‫اﻟﻤﺪاﺧﻞ واﻟﻤﺨﺎرج اﻟﺨﻠﻔﻴﺔ‬
‫ﻓﺘﺤﺔ ﺗﻮﺻﻴﻞ ﻋﺪد ‪x 1‬‬
‫ﻣﻨﻈﻮﻣﺔ اﻟﻌﺮض اﻟﻤﺮﺋﻲ ‪VGA‬‬
‫ﻓﺘﺤﺔ ﺗﻮﺻﻴﻞ ﻋﺪد ‪x 1‬‬
‫واﺟﻬﺔ ﻣﺮﺋﻴﺔ رﻗﻤﻴﺔ ‪DVI‬‬
‫ﻓﺘﺤﺔ ﻟﺘﻮﺻﻴﻞ ﻋﺪد ‪x 1‬‬
‫اﻟﺸﺒﻜﺔ اﻟﻤﺤﻠﻴﺔ ‪LAN‬‬
‫ﻓﺘﺤﺔ ﺗﻮﺻﻴﻞ ﻋﺪد ‪x 4‬‬
‫ﻧﺎﻗﻞ ﻣﺘﺴﻠﺴﻞ ﻋﺎم ‪2.0 USB‬‬
‫ﻓﺘﺤﺔ ﺗﻮﺻﻴﻞ ﻋﺪد ‪x 2‬‬
‫ﻧﺎﻗﻞ ﻣﺘﺴﻠﺴﻞ ﻋﺎم ‪3.0 USB‬‬
‫ﻓﺘﺤﺔ ﺗﻮﺻﻴﻞ ﻋﺪد ‪ x 6‬ﺟﺎك ﻟﻠﺼﻮت‬
‫‪46‬‬
‫‪Hi-Fi A85W/Hi-Fi A75W‬‬
‫اﻟﻤﻮاﺻﻔﺎت‬
‫اﻟﻤﺪاﺧﻞ واﻟﻤﺨﺎرج اﻟﺪاﺧﻠﻴﺔ‬
‫‪Hi-Fi A85W‬‬
‫‪Hi-Fi A75W‬‬
‫وﺻﻠﺔ ‪ 6 SATA x 8‬ﺟﻴﺠﺎﺑﺎﻳﺖ ‪ /‬اﻟﺜﺎﻧﻴﺔ‬
‫وﺻﻠﺔ ‪ 6 SATA x 6‬ﺟﻴﺠﺎﺑﺎﻳﺖ ‪ /‬اﻟﺜﺎﻧﻴﺔ‬
‫ﻣﻮزع ‪ x 2‬ﻧﺎﻗﻞ ﻣﺘﺴﻠﺴﻞ ﻋﺎم ‪ ) 2.0 USB‬آﻞ ﻣﻮزع‬
‫ﻣﻮزع ‪ x 2‬ﻧﺎﻗﻞ ﻣﺘﺴﻠﺴﻞ ﻋﺎم ‪ ) 2.0 USB‬آﻞ ﻣﻮزع ﻳﺘﺤﻤﻞ‬
‫ﻳﺘﺤﻤﻞ ﻓﺘﺤﺘﻴﻦ ﻧﺎﻗﻞ ﻣﺘﺴﻠﺴﻞ ﻋﺎم ‪( 2.0 USB‬‬
‫ﻓﺘﺤﺘﻴﻦ ﻧﺎﻗﻞ ﻣﺘﺴﻠﺴﻞ ﻋﺎم ‪( 2.0 USB‬‬
‫ﻣﻮزع ‪ x 1‬ﻧﺎﻗﻞ ﻣﺘﺴﻠﺴﻞ ﻋﺎم ‪ ) 3.0 USB‬آﻞ ﻣﻮزع‬
‫ﻣﻮزع ‪ x 1‬ﻧﺎﻗﻞ ﻣﺘﺴﻠﺴﻞ ﻋﺎم ‪ ) 3.0 USB‬آﻞ ﻣﻮزع ﻳﺘﺤﻤﻞ‬
‫ﻳﺘﺤﻤﻞ ﻓﺘﺤﺘﻴﻦ ﻧﺎﻗﻞ ﻣﺘﺴﻠﺴﻞ ﻋﺎم ‪( 3.0 USB‬‬
‫ﻓﺘﺤﺘﻴﻦ ﻧﺎﻗﻞ ﻣﺘﺴﻠﺴﻞ ﻋﺎم ‪( 3.0 USB‬‬
‫وﺻﻠﺔ ﻟﻠﻄﺎﻗﺔ ‪ 4 x 1‬دﺑﺎﺑﻴﺲ‬
‫وﺻﻠﺔ ﻟﻠﻄﺎﻗﺔ ‪ 4 x 1‬دﺑﺎﺑﻴﺲ‬
‫وﺻﻠﺔ ﻟﻠﻄﺎﻗﺔ ‪ 24 x 1‬دﺑﻮس‬
‫وﺻﻠﺔ ﻟﻠﻄﺎﻗﺔ ‪ 24 x 1‬دﺑﻮس‬
‫وﺻﻠﺔ ‪ x 1‬ﻣﺮوﺣﺔ ﺗﺒﺮﻳﺪ وﺣﺪة اﻟﻤﻌﺎﻟﺠﺔ اﻟﻤﺮآﺰﻳﺔ‬
‫وﺻﻠﺔ ‪ x 1‬ﻣﺮوﺣﺔ ﺗﺒﺮﻳﺪ وﺣﺪة اﻟﻤﻌﺎﻟﺠﺔ اﻟﻤﺮآﺰﻳﺔ‬
‫وﺻﻠﺔ ‪ x 2‬ﻣﺮاوح ﺗﺒﺮﻳﺪ اﻟﻤﻨﻈﻮﻣﺔ‬
‫وﺻﻠﺔ ‪ x 2‬ﻣﺮاوح ﺗﺒﺮﻳﺪ اﻟﻤﻨﻈﻮﻣﺔ‬
‫ﻣﻮزع ‪ x 1‬اﻟﻠﻮﺣﺔ اﻷﻣﺎﻣﻴﺔ‬
‫ﻣﻮزع ‪ x 1‬اﻟﻠﻮﺣﺔ اﻷﻣﺎﻣﻴﺔ‬
‫ﻣﻮزع ‪ x 1‬اﻟﺼﻮت اﻷﻣﺎﻣﻲ‬
‫ﻣﻮزع ‪ x 1‬اﻟﺼﻮت اﻷﻣﺎﻣﻲ‬
‫ﻣﻮزع ‪ x 1‬ﺳﻴﻤﻮس ﻣﺒﺎﺷﺮ‬
‫ﻣﻮزع ‪ x 1‬ﺳﻴﻤﻮس ﻣﺒﺎﺷﺮ‬
‫ﻣﻮزع ‪ x 1‬ﻣﺴﺘﻬﻠﻚ ‪IR‬‬
‫ﻣﻮزع ‪ x 1‬ﻣﺴﺘﻬﻠﻚ ‪IR‬‬
‫ﻣﻮزع ‪ x 1‬ﻓﺘﺤﺔ ﺗﺴﻠﺴﻠﻴﺔ‬
‫ﻣﻮزع ‪ x 1‬ﻓﺘﺤﺔ ﺗﺴﻠﺴﻠﻴﺔ‬
‫وﺻﻠﺔ ‪ x 1‬ﺧﺎرﺟﻴﺔ ‪ S/PDIF‬ﺳﻮﻧﻲ ﻓﻴﻠﻴﺒﺲ اﻟﻮاﺟﻬﺔ‬
‫وﺻﻠﺔ ‪ x 1‬ﺧﺎرﺟﻴﺔ ‪ S/PDIF‬ﺳﻮﻧﻲ ﻓﻴﻠﻴﺒﺲ اﻟﻮاﺟﻬﺔ اﻟﺮﻗﻤﻴﺔ‬
‫اﻟﺮﻗﻤﻴﺔ‬
‫ﻋﺎﻣﻞ اﻟﺸﻜﻞ‬
‫ﻋﺎﻣﻞ ﺷﻜﻞ ﻣﺪد اﻟﺘﻜﻨﻮﻟﻮﺟﻴﺎ اﻟﻤﺘﻘﺪﻣﺔ ‪305 ، ATX‬ﻣﻢ ‪ 235 x‬ﻣﻢ‬
‫وﻳﻨﺪوز إآﺲ ﺑﻲ ‪ / windows xp‬وﻳﻨﺪوز ﻓﻴﺴﺘﺎ ‪ /‬وﻳﻨﺪوز ‪ / 7‬وﻳﻨﺪوز ‪8‬‬
‫أﻧﻈﻤﺔ اﻟﺘﺸﻐﻴﻞ اﻟﻤﺪﻋﻮﻣﺔ‬
‫‪47‬‬
‫ﺑﻴﻮﺳﺘﺎر ‪ BIOSTAR‬ﺗﺤﺘﻔﻆ ﺑﺤﻖ إﺿﺎﻓﺔ أو أزﻟﺔ اﻟﺪﻋﻢ ﻷي ﻧﻈﺎم ﺗﺸﻐﻴﻞ ﻣﻊ أو ﺑﺪون أﻧﻈﺎر‪.‬‬
Motherboard Manual
FRENCH
Spécifications
Interface de connexion FM2 pour série A AMD/processeur série E2
Support Unité
Enveloppe thermique Unité Centrale maximum : 100Watt
Centrale
* Veuillez vous reporter à www.biostar.com.tw pour la liste des supports modèles d'Unité
Centrale.
Jeu de puces
AMD A85 FCH (Hi-Fi A85W)
AMD A75 FCH (Hi-Fi A75W)
Supporte mémoire DDR3 double canal 800/ 1066/ 1333/ 1600/ 1866/ 2133(OC)
Mémoire
Banc de mémoire 4 x DDR3 DIMM, Supporte max. jusqu’à une mémoire de 64 GB
Chaque module DIMM supporte module DDR3 non-ECC 512MB/ 1/ 2/ 4/ 8/ 16 GB
* Veuillez vous reporter à www.biostar.com.tw pour la liste des soutien de la mémoire.
Stockage
AMD A85 FCH
AMD A75 FCH
Connecteur 8 x SATA 6Gb/s
Connecteur 6 x SATA 6Gb/s
Supporte système RAID 0,1,10,5 & AHCI
Supporte système RAID 0,1,10 & AHCI
Realtek RTL 8111F
Réseau local
10/ 100/ 1000 Mb/s auto négociation, capacité bidirectionnelle à l'alternat /
bidirectionnelle simultanée
Codec audio
USB
Connecteur
d’extension
ALC892
Canaux 7.1, écoute audio de haute définition, Biostar Hi-Fi
Port 4x USB 3.0 (2 sur les I/O arrières et 2 en interne)
Port 8x USB 2.0 (4 sur les I/O arrières et 4 en interne)
2x Fente PCI
2x PCIe 2.0 x1 Fente
2x PCIe 2.0 x16 Fente (x16, x4)
1x PS/2 Clavier/ Souris
1x Port HDMI
1x Port VGA
I/O arrirèes
1x Port DVI
1x port LAN
4x Port USB 2.0
2x Port USB 3.0
6x entrées audio
48
Hi-Fi A85W/Hi-Fi A75W
Spécifications
Hi-Fi A85W:
Hi-Fi A75W:
8x Connecteur SATA 6.0Gb/s
6x Connecteur SATA 6.0Gb/s
2x embases USB 2.0
2x embases USB 2.0
(chaque embase supporte 2 Ports USB 2.0) (chaque embase supporte 2 Ports USB 2.0)
1x embase USB 3.0
1x embase USB 3.0
(chaque embase supporte 2 Ports USB 3.0) (chaque embase supporte 2 Ports USB 3.0)
I/O en interne
Facteur
d'encombrement
1x 4-Broche de carte
1x 4-Broche de carte
1x 24-Broche de carte
1x 24-Broche de carte
1x Connecteur ventilateur unité centrale
1x Connecteur ventilateur unité centrale
2x Connecteur ventilateur système
2x Connecteur ventilateur système
1x Fiche panneau avant
1x Fiche panneau avant
1x Fiche audio avant
1x Fiche audio avant
1x Fiche mémoire CMOS vide
1x Fiche mémoire CMOS vide
1x Fiche Registre d’état Consommateur
1x Fiche Registre d’état Consommateur
1x Embase port série
1x Embase port série
1x Connecteur sortie S/PDIF
1x Connecteur sortie S/PDIF
Facteur d'encombrement ATX, 305mm x 235 mm
Windows XP / Vista / 7/ 8
Support SE
Biostar se réserve le droit d’ajouter ou d'enlever le support pour toute SE avec ou sans
préavis.
49
Motherboard Manual
GERMAN
Spezifikationen
Anschluss-FM2 für AMD A-Serie/ E2-Serie-Prozessor
CPU-Unterstützung
Maximale CPU TDP (Thermal Design Power): 100 Watt
Chipset
AMD A85 FCH (Hi-Fi A85W)
* Bitte konsultieren Sie www.biostar.com.tw für CPU-Unterstützungsliste
AMD A75 FCH (Hi-Fi A75W)
Unterstützt zweikanaliges DDR3 800/ 1066/ 1333/ 1600/ 1866/ 2133(OC)
Festplattenspeicher
4 x DDR3 DIMM-SpeicherSlot, Max. Uterstützung bis zu 64 GB-Speicher
Jedes DIMM unterstützt nicht-ECC 512MB/ 1/ 2/ 4/ 8/ 16 GB DDR3-Module
* Bitte konsultieren Sie www.biostar.com.tw für für Speicherunterstützung Liste.
Arbeitsspeicher
LAN
Audio-Codec
USB
Erweiterungsanschl
üsse
AMD A85 FCH:
AMD A75 FCH:
8x SATA 6Gb-Verbindung
6x SATA 6Gb-Verbindung
Unterstützt RAID 0,1,10,5 & AHCI
Unterstützt RAID 0,1,10 & AHCI
Realtek RTL 8111F
10/ 100/ 1000 Mb Auto-Negotiation, Halb- / Voll-Duplex-fähig
ALC892
7.1 Kanäle, HD-Audio, Biostar Hi-Fi
4x USB 3.0-Port (2 hintere I/Os und 2 via interne Header)
8x USB 2.0-Port (4 hintere I/Os und 4 via interne Header)
2x PCI-Slot
2x PCIe 2.0 x1-Slot
2x PCIe 2.0 x16-Slot (x16, x4)
1x PS/2-Keyboard/ Maus
1x HDMI-Port
1x VGA-Port
Hintere I/Os
1x DVI-Port
1x LAN-Port
4x USB 2.0-Port
2x USB 3.0-Port
6x Audio Jack
50
Hi-Fi A85W/Hi-Fi A75W
Spezifikationen
Hi-Fi A85W:
Hi-Fi A75W:
8x SATA 6.0Gb/s-Verbinung
6x SATA 6.0Gb/s-Verbinung
2x USB 2.0-Header
2x USB 2.0-Header
(jeder Header unterstützt 2 USB 2.0-Ports) (jeder Header unterstützt 2 USB 2.0-Ports)
1x USB 3.0-Header
1x USB 3.0-Header
(jeder Header unterstützt 2 USB 3.0-Ports) (jeder Header unterstützt 2 USB 3.0-Ports)
Interne I/Os
Formfaktor
OS-Unterstützung
1x 4-Pin-Stromverbindung
1x 4-Pin-Stromverbindung
1x 24-Pin-Stromverbindung
1x 24-Pin-Stromverbindung
1x CPU-Ventilatorverbindung
1x CPU-Ventilatorverbindung
2x System-Ventilatorverbindung
2x System-Ventilatorverbindung
1x Header für Frontpanel
1x Header für Frontpanel
1x Header für Frontaudio
1x Header für Frontaudio
1x Header für klares CMOS
1x Header für klares CMOS
1x Consumer IR-Header
1x Consumer IR-Header
1x Serieller Port-Header
1x Serieller Port-Header
1x S/PDI-Auswurfsverbindung
1x S/PDI-Auswurfsverbindung
ATX Formfaktor, 305mm x 235 mm
Windows XP / Vista / 7/ 8
Biostar reserves the right to add or remove support for any OS with or without notice.
51
Motherboard Manual
ITALIAN
Specificazioni
Supporto
processore
Tipo scheda
Slot FM2 per processore AMD serie-A / serie – E2
Alimentazione di Proiezione Termico (TDP – Thermal Design Power): 100Watt
* Si prega di consultare www.biostar.com.tw per la lista di supporto del processore.
AMD A85 FCH (Hi-Fi A85W)
AMD A75 FCH (Hi-Fi A75W)
Supporta DDR3 800/ 1066/ 1333/ 1600/ 1866/ 2133(OC) Doppio Canale
Memoria
4 x DDR3 DIMM Slot di Memoria Supporta fino a 64 GB Memoria
Ogni DIMM supporta non-ECC 512MB/ 1/ 2/ 4/ 8/ 16 GB DDR3 moduli
* Si prega di consultare www.biostar.com.tw per la lista di supporto del memoria.
Memorizzazione
Catena
Codec Audio
USB
AMD A85 FCH:
AMD A75 FCH:
Connettore 8x SATA 6Gb/s
Connettore 6x SATA 6Gb/s
Supporta RAID 0,1,10,5 & AHCI
Supporta RAID 0,1,10 & AHCI
Realtek RTL 8111F
10/ 100/ 1000 Mb auto negoziazione, capacita di duplex Meta / Completo
ALC892
Canali Audio di Alta Definizione 7.1, Biostar Hi-Fi
Slot 4x USB 3.0 (2 nei ingressi/ uscite posteriore e 2 da distributori interni)
Slot 8x USB 2.0 (4 nei ingressi/ uscite posteriore e 4 da distributori interni)
Slot 2x PCI
Slot di espansione
Slot 2x PCIe 2.0 x1
Slot 2x PCIe 2.0 x16 (x16, x4)
Tastiera/ Mouse 1x PS/2
Slot 1x HDMI
Slot 1x VGA
Ingressi/ Uscite
Slot 1x DVI
Posteriore
Slot 1x LAN
Slot 4x USB 2.0
Slot 2x USB 3.0
Jack audio 6x
52
Hi-Fi A85W/Hi-Fi A75W
Specificazioni
Ingressi/ Uscite
Interni
Fattore di Forma
Hi-Fi A85W:
Hi-Fi A75W:
Connettore 8x SATA 6.0Gb/s
Connettore 6x SATA 6.0Gb/s
Distributore 2x USB 2.0(ogni distributore
Distributore 2x USB 2.0(ogni distributore
supporta 2 slot USB 2.0)
supporta 2 slot USB 2.0)
Distributore 1x USB 3.0(ogni distributore
Distributore 1x USB 3.0(ogni distributore
supporta 2 slot USB 3.0)
supporta 2 slot USB 3.0)
Connettore con 4 pin x1
Connettore con 4 pin x1
Connettore con 24 pin x1
Connettore con 24 pin x1
Connettore Ventilatore processore x1
Connettore Ventilatore processore x1
Connettore Ventilatore Sistema x2
Connettore Ventilatore Sistema x2
Distributore Pannello Frontale x1
Distributore Pannello Frontale x1
Distributore Audio Frontale x1
Distributore Audio Frontale x1
Distributore CMOS Diretto x1
Distributore CMOS Diretto x1
Distributore Consumabile IR x1
Distributore Consumabile IR x1
Distributore Slot Serie x1
Distributore Slot Serie x1
Connettore esterno S/PDIF x1
Connettore esterno S/PDIF x1
Fattore di Forma ATX, 305mm x 235 mm
Windows XP / Vista / 7/ 8
Supporto SO
Biostar si riserva il diritto di aggiungere o ritirare il supporto per qualsiasi SO con o senza
preavviso.
53
Motherboard Manual
JAPANESE
仕様
AMD A-シリーズ/ E2-シリーズ プロセッサの Socket FM2
CPU サポート
最大 CPU TDP (Thermal Design Power 最大放熱量):100 W
*CPU サポート リストについては、www.biostar.com.twを参照してください。
チップセット
AMD A85 FCH (Hi-Fi A85W)
AMD A75 FCH (Hi-Fi A75W)
デュアルチャンネル DDR3 800/ 1066/ 1333/ 1600/ 1866/ 2133(OC) をサポート
メモリ
4 x DDR3 DIMM メモリ スロット、 最大 64 GB メモリまでサポート
各 DIMM は、 非-ECC 512MB/ 1/ 2/ 4/ 8/ 16 GB DDR3 モジュールをサポートしています
*サポートされているメモリのリストについては、www.biostar.com.twを参照してください。
保存スペース
LAN
オーディオ コーデッ
ク
USB
AMD A85 FCH:
AMD A75 FCH:
8x SATA 6Gb/s コネクタ
6x SATA 6Gb/s コネクタ
RAID 0,1,10,5 & AHCI のサポート
RAID 0,1,10 & AHCI のサポート
Realtek RTL 8111F
10/ 100/ 1000 Mb/s オートネゴーシエーション、半/全 二重通信
ALC892
7.1 チャンネル, ハイ デフィニション オーディオ, Biostar Hi-Fi
4x USB 3.0 ポート (後部 I/O に2つ 及び 内蔵 ヘッダー経由に2つ)
8x USB 2.0 ポート (後部 I/O に4つ 及び 内蔵ヘッダー経由に4つ)
2x PCI スロット
拡張スロット
2x PCIe 2.0 x1 スロット
2x PCIe 2.0 x16 スロット(x16, x4)
1x PS/2 キーボード/マウス
1x HDMI ポート
1x VGA ポート
後部 I/O
1x DVI ポート
1x LAN ポート
4x USB 2.0 ポート
2x USB 3.0 ポート
6x オーディオ ジャック
54
Hi-Fi A85W/Hi-Fi A75W
仕様
内蔵 I/O
フォーム ファクタ
サポート OS
Hi-Fi A85W:
Hi-Fi A75W:
8x SATA 6.0Gb/s コネクタ
6x SATA 6.0Gb/s コネクタ
2x USB 2.0 ヘッダー (各ヘッダーは、2つの
2x USB 2.0 ヘッダー (各ヘッダーは、2つの
USB 2.0 ポートをサポートしています)
USB 2.0 ポートをサポートしています)
1x USB 3.0 ヘッダー (各ヘッダーは、2つの
1x USB 3.0 ヘッダー (各ヘッダーは、2つの
USB 3.0 ポートをサポートしています)
USB 3.0 ポートをサポートしています)
1x 4-Pin パワー コネクタ
1x 4-Pin パワー コネクタ
1x 24-Pin パワー コネクタ
1x 24-Pin パワー コネクタ
1x CPU ファン コネクタ
1x CPU ファン コネクタ
2x システム ファン コネクタ
2x システム ファン コネクタ
1x フロント パネル ヘッダー
1x フロント パネル ヘッダー
1x フロント オーディオ ヘッダー
1x フロント オーディオ ヘッダー
1x クリア CMOS ヘッダー
1x クリア CMOS ヘッダー
1x コンシューマー IR ヘッダー
1x コンシューマー IR ヘッダー
1x シリアル ポート ヘッダー
1x シリアル ポート ヘッダー
1x S/PDIF アウト コネクタ
1x S/PDIF アウト コネクタ
ATX フォーム ファクタ、305mm x 235 mm
Windows XP / Vista / 7/ 8
Biostar には、通知なしでサポート OS を変更する権限があります。
55
Motherboard Manual
POLISH
Specyfikacje techniczne
Gniazdo procesora (Socket) FM2 dla procesorów AMD seria-A / seria – E2
Obsługa procesora
Moc Wydzielanego Ciepła (TDP - Thermal Design Power): 100Watt
* Proszę sprawdzić listę obsługiwanych procesorów na stronie internetowej
www.biostar.com.tw
Rodzaj płyty
AMD A85 FCH (Hi-Fi A85W)
AMD A75 FCH (Hi-Fi A75W)
Obsługa pamięci DDR3 800/ 1066/ 1333/ 1600/ 1866/ 2133(OC) Dwukanałowa
4 x DDR3 DIMM Pamięć Gniazda procesora (Slot), Maksymalna wielkość pamięci 64 GB
Pamięć
Każdy DIMM obsługuje jeden moduł non-ECC 512MB/ 1/ 2/ 4/ 8/ 16 GB DDR3
* Proszę sprawdzić listę obsługiwanych pamięć na stronie internetowej
www.biostar.com.tw
Przechowywanie
LAN
Codec Audio
USB
AMD A85 FCH:
AMD A75 FCH:
Złącze 8x SATA 6Gb/s
Złącze 6x SATA 6Gb/s
Obsługa RAID 0,1,10,5 & AHCI
Obsługa RAID 0,1,10 & AHCI
Układ RTL 8111F
10/ 100/ 1000 Mb auto negocjacja, pojemność dupleks Połowe / Pełny
ALC892
Kanały Audio wysokiej Definicji 7.1, Biostar Hi-Fi
4 x złącza USB 3.0 (2 przez tylne porty wejścia/ wyjścia oraz 2 przez wewnętrzne porty)
8 x złącza USB 2.0 (4 przez tylne porty wejścia/ wyjścia oraz 4 przez wewnętrzne porty)
złącza 2x PCI (Slot)
Złącza rozszerzeń
złącze 2x PCIe 2.0 x1 (Slot)
złącza 2x PCIe 2.0 x16 (Slot) (x16, x4)
Klawiatura/ Myszka 1x PS/2
Port 1x HDMI (gniazdo)
Port 1x VGA
Tylne porty wejścia/
Port 1x DVI
wyjścia
Port 1x LAN
Porty 4x USB 2.0
Porty 2x USB 3.0
Porty audio 6x
56
Hi-Fi A85W/Hi-Fi A75W
Specyfikacje techniczne
Hi-Fi A85W:
Hi-Fi A75W:
Złącza 8x SATA 6.0Gb/s
Złącza 6x SATA 6.0Gb/s
Złącza 2x USB 2.0 (każde złącze obsługuje
Złącza 2x USB 2.0 (każde złącze
dodatkowe 2 porty USB 2.0)
obsługuje dodatkowe 2 porty USB 2.0)
Złącze 1x USB 3.0 (każde złącze obsługuje
Złącze 1x USB 3.0 (każde złącze
dodatkowe 2 porty USB 3.0)
obsługuje dodatkowe 2 porty USB 3.0)
Złącza 4 pionowe x 1
Złącza 4 pionowe x 1
Wewnętrzne porty
Złącza 24 pionowe x 1
Złącza 24 pionowe x 1
wejścia/ wyjścia
Złącze wentylatora CPU x 1
Złącze wentylatora CPU x 1
Złącze wentylatora obudowy x 2
Złącze wentylatora obudowy x 2
Złącze przedniego panelu x1
Złącze przedniego panelu x1
Złącze audio przedniego panelu x1
Złącze audio przedniego panelu x1
Obudowa
Złącze bezpośrednie CMOS x1
Złącze bezpośrednie CMOS x1
Złącze konsument IR x1
Złącze konsument IR x1
Port szeregowy x1
Port szeregowy x1
Port zewnętrzny S/PDIF x1
Port zewnętrzny S/PDIF x1
Obudowa ATX, 305mm x 235 mm
Windows XP / Vista / 7/ 8
Obsługa OS
Biostar zastrzega sobie prawo do dodania lub wycofania obsługi dla OS, z
wypowiedzeniem lub bez wypowiedzenia.
57
Motherboard Manual
PORTUGUESE
Especificações
Porta FM2 para processador AMD série-A / série – E2
Suporte
Processador
Alimentação de Design Térmico (TDP – Thermal Design Power): 100Watt
* Por favor consulte www.biostar.com.tw para obter uma lista de suporte do
processador.
Tipo Placa Mãe
AMD A85 FCH (Hi-Fi A85W)
AMD A75 FCH (Hi-Fi A75W)
Suporta DDR3 800/ 1066/ 1333/ 1600/ 1866/ 2133(OC) Canal Duplo
Memória
2 x DDR3 DIMM Slot de memória Suporta até 32 GB Memória
Cada DIMM suporta non-ECC 512MB/ 1/ 2/ 4/ 8/ 16 GB DDR3 módulo
* Por favor consulte www.biostar.com.tw para obter uma lista de suporte do memória.
Armazenamento
LAN
Codec de Audio
USB
AMD A85 FCH:
AMD A75 FCH:
Conector 8x SATA 6Gb/s
Conector 6x SATA 6Gb/s
Suporta RAID 0,1,10,5 & AHCI
Suporta RAID 0,1,10 & AHCI
Realtek RTL 8111F
10/ 100/ 1000 Mb auto negociação, capacidade duplex Metade / Cheio
ALC892
Canais de Áudio de Alta Definição 7.1, Biostar Hi-Fi
Porta 4x USB 3.0 (2 nas entradas/saídas traseiras e 2 pelos Dispositivos internos)
Porta 8x USB 2.0 (4 nas entradas/saídas traseiras e 4 pelos Dispositivos internos)
Porta 2x PCI
Slots de expansão
Porta 2x PCIe 2.0 x1
Porta 2x PCIe 2.0 x16 (x16, x4)
Teclado/ Mouse 1x PS/2
Porta 1x HDMI
Porta 1x VGA
Entradas/Saídas no Porta 1x DVI
painel traseiro
Porta 1x LAN
Porta 4x USB 2.0
Porta 2x USB 3.0
Soquete audio 6x
58
Hi-Fi A85W/Hi-Fi A75W
Especificações
Conectores na
placa
Fator de Fôrma
Hi-Fi A85W:
Hi-Fi A75W:
Conector 8x SATA 6.0Gb/s
Conector 6x SATA 6.0Gb/s
Dispositivo 2x USB 2.0 (cada Dispositivo
Dispositivo 2x USB 2.0 (cada Dispositivo
suporta 2 portas USB 2.0)
suporta 2 portas USB 2.0)
Dispositivo 1x USB 3.0 (cada Dispositivo
Dispositivo 1x USB 3.0 (cada Dispositivo
suporta 2 portas USB 3.0)
suporta 2 portas USB 3.0)
Conector de 4 pinos x1
Conector de 4 pinos x1
Conector de 24 pinos x1
Conector de 24 pinos x1
Conector de Ventoinha processador x1
Conector de Ventoinha processador x1
Conector de Ventoinha Sistema x1
Conector de Ventoinha Sistema x1
Dispositivo Painel Frontal x1
Dispositivo Painel Frontal x1
Dispositivo de Audio Frontal x1
Dispositivo de Audio Frontal x1
Dispositivo CMOS Direct x1
Dispositivo CMOS Direct x1
Dispositivo Consumível IR x1
Dispositivo Consumível IR x1
Dispositivo Porta Impressora x1
Dispositivo Porta Impressora x1
Dispositivo Porta Série x1
Dispositivo Porta Série x1
Conector Externo S/PDIF x1
Conector Externo S/PDIF x1
Fator de Fôrma ATX, 305mm x 235 mm
Windows XP / Vista / 7/ 8
Suporte OS
Biostar reserva seu direito de adicionar ou retirar o suporte para qualquer OS com ou sem
notificação.
59
Motherboard Manual
RUSSIAN
Спецификации
Поддержка
центрального
Сокет FM2 для процессоров AMD серии A/ серии E2
Максимальный термопакет центрального процессора (TDP): 100 ватт
процессора
* Перечень поддержки центрального процессора смотрите на
Набор микросхем
AMD A85 FCH (Hi-Fi A85W)
www.biostar.com.tw.
AMD A75 FCH (Hi-Fi A75W)
Поддерживает двухканальный DDR3 800/ 1066/ 1333/ 1600/ 1866/ 2133(OC)
Память
4 гнезда платы памяти DDR3 DIMM, максимальная память до 64 Гб
Каждый модуль DIMM поддерживает модуль не-ECC 512 Мб/ 1/ 2/ 4/ 8/ 16 Гб DDR3
* Перечень поддержки памяти смотрите на www.biostar.com.tw.
Накопитель
Локальная сеть
Аудиокодек
USB
AMD A85 FCH:
AMD A75 FCH:
Соединитель 8x SATA 6 Гб/с
Соединитель 6x SATA 6 Гб/с
Поддерживает RAID 0,1,10,5 & AHCI
Поддерживает RAID 0,1,10 & AHCI
Realtek RTL 8111F
Автосогласование 10/ 100/ 1000 Мб/с, работает в полно/полудуплексном режиме
ALC892
Каналы 7.1, высококачественное аудио, Biostar Hi-Fi
4 порта USB 3.0 (2 сзади ввода-вывода и 2 через внутренние контакты)
8 порта USB 2.0 (4 сзади ввода-вывода и 4 через внутренние контакты)
2x гнезда PCI
Гнезда расшир.
2x PCIe 2.0 x1 гнездо
2x PCIe 2.0 x16 гнездо (x16, x4)
1 клавиатура/ мышь PS/2
1 порт HDMI
1 порт VGA
Задняя плата
ввода-вывода
1 порт DVI
1 порт локальной сети
4 порта USB 2.0
2 порта USB 3.0
6 гнезд для подключения наушников
60
Hi-Fi A85W/Hi-Fi A75W
Спецификации
Внутр. Плата
ввода-вывода
Конструктив
Hi-Fi A85W:
Hi-Fi A75W:
Соединитель 8x SATA 6 Гб/с
Соединитель 6x SATA 6 Гб/с
2 контакта USB 2.0 (каждый контакт
2 контакта USB 2.0 (каждый контакт
поддерживает 2 порта USB 2.0)
поддерживает 2 порта USB 2.0)
1 контакт USB 3.0 (каждый контакт
1 контакт USB 3.0 (каждый контакт
поддерживает 2 порта USB 3.0)
поддерживает 2 порта USB 3.0)
1 4-выводный разъем питания
1 4-выводный разъем питания
1 24-выводный разъем питания
1 24-выводный разъем питания
1 разъем вентилятора ЦП
1 разъем вентилятора ЦП
2 разъема вентилятора системы
2 разъема вентилятора системы
1 контакт передней панели
1 контакт передней панели
1 контакт передней аудиопанели
1 контакт передней аудиопанели
1 контакт микросхемы Clear CMOS
1 контакт микросхемы Clear CMOS
1 инфракрасный пользовательский
1 инфракрасный пользовательский
контакт
контакт
1 контакт последовательного порта
1 контакт последовательного порта
1 соединитель S/PDIF-Out
1 соединитель S/PDIF-Out
Форм-фактор ATX, 305мм x 235 мм
Windows XP / Vista / 7/ 8
Поддержка ОС
Biostar оставляет за собой право добавлять или удалять поддержку любой ОС, с
уведомлением или без.
61
Motherboard Manual
SPANISH
Especificaciones
Ranura FM2 para procesador AMD serie - A / serie – E2
Compatibilidad con Alimentación de Proyección Térmica (TDP – Thermal Design Power): 100Watt
el procesador
*Por favor consultar con www.biostar.com.tw para la lista de compatibilidad con el
procesador.
Tipo de Placa
AMD A85 FCH (Hi-Fi A85W)
AMD A75 FCH (Hi-Fi A75W)
Soporta DDR3 800/ 1066/ 1333/ 1600/ 1866/ 2133(OC) Doble Canal
4x DDR3 DIMM Ranura de memoria Soporta hasta 64 GB Memoria
Memoria
Cada DIMM soporta un modulo non-ECC 512MB/ 1/ 2/ 4/ 8/ 16 GB DDR3
*Por favor consultar con www.biostar.com.tw para la lista de compatibilidad con el
memoria.
Almacenamiento
de información
LAN
Códec Audio
AMD A85 FCH:
AMD A75 FCH:
Conector 8x SATA 6Gb/s
Conector 6x SATA 6Gb/s
Soporta RAID 0,1,10,5 & AHCI
Soporta RAID 0,1,10 & AHCI
Realtek RTL 8111F
10/ 100/ 1000 Mb/s auto negociación, capacidad dúplex Mitad/Completo
ALC892
Canales Audio de Alta Definición 7.1, Biostar Hi-Fi
Ranura 4x USB 3.0 (2 en las entrada/salidas posteriores y 2 por los distribuidores
USB
internos)
Ranura 8x USB 2.0 (4 en las entrada/salidas posteriores y 4 por los distribuidores
internos)
Ranuras de
Extinción
Ranura 2x PCI
Ranura 2x PCIe 2.0 x1
Ranura 2x PCIe 2.0 x16 (x16, x4)
Teclado/ Ratón 1x PS/2
Ranura 1x HDMI
Ranura 1x VGA
Panel trasero de
Ranura 1x DVI
E/S
Ranura 1x LAN
Ranura 4x USB 2.0
Ranura 2x USB 3.0
Socket audio 6x
62
Hi-Fi A85W/Hi-Fi A75W
Especificaciones
Conectores en
placa
Factor de Forma
Hi-Fi A85W:
Hi-Fi A75W:
Conector 8x SATA 6Gb’s
Conector 6x SATA 6Gb’s
Distribuidor 2x USB 2.0 (cada distribuidor
Distribuidor 2x USB 2.0 (cada distribuidor
soporta 2 ranuras USB 2.0)
soporta 2 ranuras USB 2.0)
Distribuidor 1x USB 3.0 (cada distribuidor
Distribuidor 1x USB 3.0 (cada distribuidor
soporta 2 ranuras USB 3.0)
soporta 2 ranuras USB 3.0)
Conector con 4 patillas x1
Conector con 4 patillas x1
Conector con 24 patillas x1
Conector con 24 patillas x1
Conector Ventilador procesador x1
Conector Ventilador procesador x1
Conector Ventilador Sistema x2
Conector Ventilador Sistema x2
Distribuidor Panel Frontal x1
Distribuidor Panel Frontal x1
Distribuidor Audio Frontal x1
Distribuidor Audio Frontal x1
Distribuidor CMOS Directo x1
Distribuidor CMOS Directo x1
Distribuidor Consumible IR x1
Distribuidor Consumible IR x1
Distribuidor Ranura Serie x1
Distribuidor Ranura Serie x1
Conector Externo S/PDIF x1
Conector Externo S/PDIF x1
Factor de Forma ATX, 305mm x 235 mm
Windows XP / Vista / 7/ 8
Soporte OS
Biostar reserva su derecho de añadir o retirar el soporte para cada OS con o sin
notificación.
2013/04/23
63
Download PDF
Similar pages