Introduction
D
A
T
A
L
O
G
G
E
R
S
Long term recording of humidity and temperature measurements is essential in many production, storage, transportation, display
and test applications. They provide valuable information on the levels and variation of humidity and temperature which can have a
significant impact on people, materials and objects. Compliance with the requirements of FDA CFR21 and GAMP4 is considered a
must, especially in the pharmaceutical and food industries.
The HygroLog NT is ROTRONIC’s next generation datalogger. It has been newly developed to meet regulatory requirements, and to provide a range of features and functionality to satisfy even the most demanding needs. To complement this new product, a new software
package has been developed to suit. It has functionality which is unique to modular data logger modules.
The ROTRONIC range of data loggers and recorders are highly accurate and stable, but are easy to use and maintain. Configuration and
programming can easily be performed by any operator, with user-friendly software or integrated keypads. Data can be presented in a
graphical or statistical format. A wide range of interchangeable probes means simple maintenance and application flexibility.
Key features
Your benefits
●
Compact stand alone modules
●
Measurement display
●
Accuracy and long term stability
●
Interchangeable sensor modules
●
Wide range of probes
●
Robust IP65 housing with shock protection
●
Battery / rechargeable battery powered
●
Custom mounting hardware
●
Flash Card memory
●
User-friendly software
●
FDA CFR 21 Part 11 / GAMP 4 compliance
u Easy to install and flexible
u Easy observation of current values and alarm indicators
u Reliable data and reduced maintenance
u Easy calibration and maintenance
u One logger – many applications
u Suitable for industrial use.
u No installation costs and can be easily relocated
u Professional installation
u Practically unlimited recording time
u Easy to learn and use
u High quality assurance
Section contents
HygroLog NT – the new logger generation
●
●
●
●
●
●
●
●
●
16 -19
Integrated or interchangeable probes
Integrated display (optional)
Alarm function
Easy-to-use by keypad or software
FDA CFR 21 11 & GAMP4 compliant
Interchangeable Compact Flash Card memory for virtually limitless number of measurement values
Probe adjustable directly in logger
Docking stations for extended options
Networkable
HygroLog and HygroLog-D data loggers for HygroClip probes
●
●
●
●
Interchangeable probes
Integrated display
Alarm function
Validated, easy-to-use software
HygroClip probes for HygroLog data loggers
●
●
●
21-22
Wide range of options to suit any application
0…100 %rh, -50…200 °C
100% interchangeable without adjustment
Accessories for data loggers
●
●
●
●
●
●
●
●
23
Installation hardware
Impact protection
Connecting cables
Power supplies
Agent D data logger for humidity and temperature
14
20
64,000 point memory
Multi channel temperature only version
EX- rated
External start feature for instruments without keypad
25-26
Data l og ge r a ppl i ca t i on s
D
A
T
A
L
O
Store rooms and warehouses
G
Museums, libraries and art galleries
G
E
R
S
Clean rooms
Controlled environments & cabinets
Production areas
Transportation
15
HygroLog NT
D
A
T
A
L
O
G
G
E
R
Humidity and temperature logger for digital HygroClip® probes.
The new HygroLog NT-Series is a completely new development, designed to meet and exceed today’s functional, performance and
regulatory needs. Using flash-card memory, their logging capacity is virtually limitless, and the state-of-the-art digital electronics takes
measurement performance to a higher standard. Data maybe stored in two different ways: In simple text mode or in protected mode,
readable only by HW4. In text mode, 25,000 data records may be recorded per MB storage capacity of the flash card; in protected mode,
47,000 records per MB.
Digital data communications guarantees best possible performance, 0 is always 0, and 1 is always 1, so accuracy of data transfer is
absolute, and calibration can be maintained using digital probe interchangeability. Should you need to change the logger’s application,
a range of alternative probe types can be connected without further need for calibration or loss of performance.
The loggers store all events such as battery change, operator manipulation or the change of a flash card. With this feature, referred to as
the audit trail, the loggers fulfil the demands of the pharmaceutical, chemical and food industries. The HygroLog NT Series and associated software are compliant with FDA CFR 21.11 and GAMP4 requirements.
More information regarding software can be found in the Software section of the catalogue.
S
HygroLog NT1
Data logger with integrated humidity/temperature sensor.
Features
•
•
•
•
•
•
•
•
•
•
•
•
•
Flash card memory for virtually unlimited logging
Data retrieval by card reader, PDA or PC with HW4 or docking station
16 MB flash card included, extendable up to 1 GB
Digital signal processing for maximum precision
Real time clock
Logging interval selectable from 5 s to 24 h
Operation with batteries or rechargeable batteries
Battery life > 1 year (depends on options and programming)
Selectable logging modes, such as start/stop, text and protected mode
Operating range: 0…100 %rh; -30 …70 °C; with display -10...60 °C
Accuracy: ±2 %rh / 0.5 K
LED status indicator
Optional display and keypad for actual measurement values, status,
operation, adjustment and view of logdata
Options connected via optional docking station:
•
•
•
•
•
Power supply and battery charge by mains adaptor
RS232 and RS485 interface for networking and data retrieval
Connection of up to 4 additional analogue or digital probes
Connection of up to 4 additional Pt100 probes
2 digital inputs for monitoring of doors etc.
Order code:
HygroLog NT1
HygroLog NT1-D
Hygrodata-NT-E
Hygrodata-NT-P
HW4-E
HW4-P
Basic model with integrated sensors, without display
with full-graphical display and keypad
PC access set with standard software,
DS-NT2, data cable for HygroLog NT
PC-access-set with professional software,
DS-NT2, data cable for HygroLog NT
Standard software for programming and data management
Professional software with additional validation functions
More options see page 19
16
HygroLog NT
D
A
Features Overview
T
A
L
O
Integrated or
interchangeable probe
Optional inputs compatible
with Industrial probes
G
G
E
R
S
Full graphic display
(optional)
Optional inputs
for Pt100 probes
Lockable
mounting option
PDA-compatible
Flash Card enables
rapid data transfer
Easy operation
with keypad
Battery charge function when in
docking station
Shockproof IP 65 housing
USB / Bluetooth interface (optional)
Audit trail – protected, Excel
compatible data, suitable for pharmaceutical and chemical industries
17
HygroLog NT
D
A
T
HygroLog NT2
Data logger for single interchangeable humidity/temperature probe
A
Features
L
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
O
G
G
E
R
S
Flash card memory for virtually unlimited logging
Data retrieval by card reader, PDA or PC with HW4 or software
16 MB flash card included, extendable up to 1 GB
Digital signal processing for maximum precision
Real time clock
Logging interval selectable from 5 s to 24 h
Operation with batteries or rechargeable batteries
Battery life >1 year (depends on options and programming)
Selectable logging modes, such as start/stop, text and protected mode
Operating range: 0…100 %rh; -30 …70 °C; with display –10...60 °C
Measuring range: max. -50…200 °C, probe dependent
Accuracy: probe dependent
Probe adjustable in logger
LED status indicator
Optional display and keypad for actual measurement values, status, operation,
adjustment and for viewing logged data
• Remote display of measurement values by a second HygroLog NT for
loggers without display
• Audible alarm (beeper)
Order code:
HygroLog NT2
HygroLog NT2-D
HygroLog NT2-D-BT
Basic model for interchangeable probe, without display
with full graphic display and keypad
with full graphic display, keypad & Bluetooth interface
Probes must be ordered separately. See pages 21…22.
HygroLog NT3
Data logger for up to 3 interchangeable humidity/temperature probes
Features
The features of HygroLog NT3 are basically identical to HygroLog NT2.
HygroLog NT3 features 3 probe inputs. Each probe may be selected and programmed
individually.
Order code:
HygroLog NT3
HygroLog NT3-D
HygroLog NT3-D-BT
Basic model for interchangeable probes, without display
with full graphic display and keypad
with full graphic display, keypad & Bluetooth interface
Software for all HygroLog NT types:
Hygrodata-NT-E
Hygrodata-NT-P
HW4-E
HW4-P
PC access-set with standard software,
DS-NT2, data cable for HygroLog NT
PC access-set with professional software,
DS-NT2, data cable for HygroLog NT
Standard software for programming and data management
Professional software with additional validation functions
Probes must be ordered separately. See pages 21…22.
Options connected via optional docking station:
•
•
•
•
•
•
•
18
Networkable, data retrieval via network ( from mid-2004)
Power supply by mains adaptor
RS232 and RS485 interface for networking and data retrieval
Connection of up to 4 additional analogue or digital probes
Connection of up to 4 additional Pt100 probes
2 digital inputs for monitoring of doors etc.
USB interface
Options for HygroLog NT Series
Docking stations for HygroLog NT
•
•
•
•
•
•
•
Bracket for wall or desk mounting
Various optional functions (depending on model)
Data retrieval directly by PC
Lockable
Connection for external power supply
IP65 protection rating
Storage for protective caps and connectors
Order code:
DS-NT1
DS-NT2
DS-NT3
DS-U-1
DS-PT-1
DS-U-2
DS-PT-2
D
A
T
A
L
O
G
Basic version without electronics. Connection for
external power supply with mains adaptor.
Docking station with RS232 and RS485 interface.
Connection for external power supply with mains adaptor.
Docking station with USB and RS485 interface.
Connection for external power supply with mains adaptor.
Docking station with RS232 and RS485 Interface.
Connection for external power supply with mains adaptor.
Additional 4 digital or analogue probe inputs & 2 digital inputs
Docking station with RS232 and RS485 Interface.
Connection for external power supply with mains adaptor.
Additional 4 Pt100 inputs & digital inputs
Docking station with USB and RS485 Interface.
Connection for external power supply with mains adaptor.
Additional 4 digital or analogue probe inputs & 2 digital inputs
Docking station with USB and RS485 interface.
Connection for external power supply with mains adaptor.
Additional 4 Pt100 inputs & digital inputs
G
E
R
S
Note:
Availability of DS-PT1, DS-U-1, DS-PT2 is from summer 2004.
All docking stations may be wall mounted. Desk mounting requires the NT-Desk option.
All docking stations are lockable with a padlock (padlock not included).
Further accessories:
Order code:
Hygrodata-NT-E
Hygrodata-NT-P
NT-Desk
AC1211
AC-NT16MB
AC-NT32MB
AC-NT64MB
15.08.6212
11.01.6218
11.02.9018
AC1614-02
AC-NT-REM
AC-NT-BT
PC access set with standard software,
DS-NT2, data cable for HygroLog NT
PC access set with professional software,
DS-NT2, data cable for HygroLog NT
Desktop stand for HygroLog NT
for all HygroLog NT types with docking station
Mains adapter for docking stations (European)
for all HygroLog NT types with docking station
12 VDC /200 mA, with adaptors for USA & UK
Flash Card 16 MB, industry type -40…85 °C
Flash Card 32 MB, industry type -40…85 °C
Flash Card 64 MB, industry type -40…85 °C
Flash Card Reader incl. USB cable and driver
RS232 data cable 1.8 m Docking Station to PC
Standard USB cable type A-B, 1.8 m
RS485 cable for HygroLog NT, used for cabling via terminal box
Remote-cable for loggers without display
Bluetooth adaptor for PC USB interface
19
D
A
T
A
L
HygroLog and HygroLog D
Humidity and Temperature logger for digital HygroClip® probes.
The HygroLog data logger uses the HygroClip range of digital probes for long term recording of humidity and temperature conditions.
By using the digital signal output from the HygroClip probes, measurement precision is optimised with no signal loss over extended
cable lengths and no external interference can influence measured values. Calibration data is maintained within the probe, which means
there is no need to calibrate the whole system, and probes can be interchanged in seconds. In conjunction with the HW3 software, the
HygroLog can be supplied with full validation documentation.
O
G
G
E
R
S
HygroLog
Self contained data logger for HygroClip® digital probes
Key features:
•
•
•
•
•
•
Stores up to 2 x 5000 values for humidity and temperature
Digital signal processing for maximum accuracy
Logging interval from 15 seconds to 2 hours
Standard alkaline batteries used
Operating modes selectable: start/stop or loop mode
Operating range logger: 0…100 %rh; -30 …70 °C
(Battery dependent; with alkaline batteries -10…50 °C)
• Measuring range probes: -50…200 °C, probe dependent
• Backup battery for data protection
Order code:
HygroLog
(probe must be ordered separately)
HygroLog-D
Humidity and temperature data logger with LCD display for
HygroClip® digital probes
Key features:
• Stores up to 2 x 5000 values for humidity and temperature
• Digital signal processing for maximum accuracy
• Logging interval from 15 seconds to 2 hours
• Standard alkaline batteries used
• Operating modes selectable: Start/stop or loop mode
• Operating range Logger: 0…100 %rh; -10 …50 °C
• Operating range probes: -50…200 °C (probe dependent)
• Visual alarm indicators on LCD for temperature & humidity
• Battery status display
• Status display saving / busy
• Backup battery for data protection
Order code:
HygroLog-D
(probes must be ordered separately)
Software HW3 and Data Cable (FDA CFR 21 Part 11 compliant)
The validated HW3 software is used for logger programming as
well as to retrieve data. Data may be displayed in a table or graph
form. A language editor allows the user to translate the text into
his own language. Psychrometric calculations such as dew point
may also be performed within the software, and the option to
show these values graphically is also included. Calculations may
be executed by using a pressure constant or, depending on the
instruments connected, dynamically with a pressure probe. As the
software can also be used with the full ROTRONIC product range,
it offers a variety of other features, such as sending e-mails in case
of alarms, data archiving, etc. Of course, measurement data can
also be exported to MS Office applications. For extended description see the software section of this catalogue.
Order code:
HygroData HL
20
For HygroLog and HygroLog-D
HygroClip Probes for HygroLog Data loggers
A range of probes for different applications are available for the HygroLog Data loggers. All probes are based on digital HygroClip
technology, and can be interchanged within seconds without need for recalibration. With special adaptor cables, even probes designed
for transmitters may be used.
D
A
T
A
HygroClip S/S1
Sensor module for humidity and temperature. A wire mesh filter
provides sensor protection against dust and high air velocity.
HygroClip S1 is specially calibrated and SCS-certified to provide
measurement accuracy of ±1 %rh.
Dimensions
Measurement range:
Accuracy (S1):
Accuracy:
Output:
Ø15 x 100 mm. IP rating: IP65
-40…85 °C, 0…100 %rh
±1.0 %rh, ±0.2 K (at 23 °C)
±1.5 %rh, ±0.3 K (at 23 °C)
ROV analogue & DIO digital signal
Order code:
HygroClip S
HygroClip S1
standard HygroClip
with SCS certificate (23 °C / 35 / 50 / 80 %rh)
L
O
G
G
E
R
S
HygroClip SC04 / SC05
4 or 5 mm cable probe for humidity and temperature measurements in
small spaces such as product & packaging testing, concrete, electronic
test and climatic chambers.
Cable length 2 m
Measurement range: -40…100 °C, 0…100 %rh
Accuracy:
±1.5 %rh, ±0.3 K (at 23 °C)
Output:
ROV analogue & DIO digital signal
Order code:
HygroClip SC04
HygroClip SC05
Ø 4 x 2000 mm cable probe
Ø 5 x 2000 mm cable probe
HygroClip HK 25 / HK40
High temperature probe for measurements in ducts, dryers,
climatic chambers etc. Probe length 250 or 400 mm. Wire mesh
filter included.
Measurement range: HK25: -50…150 °C, 0…100 % rh
HK40: -50…200 °C, 0…100 % rh
Accuracy:
±1.5 %rh, ±0.3 K (at 23 °C)
Output:
ROV analogue & DIO digital signal
Order code:
HygroClip HK25
HygroClip HK40
(250 mm, max.150 °C)
(400 mm, max. 200 °C)
Adaptor cable MOK-02-B5
Adaptor cable for probe inputs with Binder 5-pin connector (screwtype for NT2, NT3 and docking stations)
Order code:
MOK-02-B5
2 m cable length
Calibration devices and humidity standards see page 103/104
21
D
A
T
A
L
O
G
HygroClip probes for HygroLog data loggers
HygroClip SP05
Fast response 5 mm diameter insertion probe with laser cut air slots for bulk goods such
as corn, wheat, & granules. Also suitable for measurements in concrete and brick. Not
suitable for powders. Probe length 200 mm
Measurement range: -40…85 °C , 0…100 %rh,
Accuracy:
±1.5 %rh, ±0.3 K (at 23 °C)
Output:
ROV analogue & DIO digital signal
Order code:
HygroClip SP05
G
E
R
S
HygroClip HP28
Robust 10 mm diameter tubular probe for measurements in bulk products
such as powders & granules. Probe length 280 mm, 10mm diameter. 2 m cable,
steel sinter filter.
Measurement range: -40…85 °C, 0…100 % rh
Accuracy:
±1.5 % rh, ±0.3 K (at 23 °C)
Output:
ROV analogue & DIO digital signal
Order code:
HygroClip HP28
HygroClip HS28 Sword Probe
For measurements in paper stacks/rolls. Lightweight, yet robust
aluminium blade for fast temperature and humidity equilibrium.
Sword blade 280 x 18 x 4 mm.
Measuring range:
Accuracy:
Output:
Order code:
HygroClip HS28
HygroClip HS42
-40…85 °C, 0… 100 %rh
±1.5 %rh, ±0.3 K (at 23 °C)
ROV analogue & DIO digital signal
Sword blade 280 mm
Sword blade 420 mm
Adaptor cable MOK-02-B5
Adaptor cable for probe inputs with Binder 5-pin connector (screwtype for NT2, NT3 and docking stations)
Order code:
MOK-02-B5
2 m cable length
Calibration devices and humidity standards see page 103/104
22
Accessories for HygroLog series
Wall Mounting Bracket IPH
Wall mounting bracket with integrated power supply connector, suitable for AC1207
adaptor. The use of the external power supply extends battery life of the logger. However,
it is not possible to operate the logger with rechargeable batteries.
D
A
T
A
L
O
Anti Theft Device
The anti theft device may be combined with the wall mounting brackets Hygrolog IPH
and IPH-2. HygroLog IPH is fixed on a flat surface together with the securing plate by two
screws. A steel rod with a padlock secures the logger in place. (Delivered without padlock)
G
Order code:
HygroLog IPH
HygroLog IPH-2
AC1207
AC1005
E
HygroLog-SP
with connection for power supply
without connection for power supply
AC adaptor
Anti theft device for HygroLog and HygroLog D,
to be combined with HygroLog IPH and IPH-2
Impact protection for HygroLog / HygroLog D
G
R
S
Extension Cables and Adaptors
For applications in high temperatures or in ducts, etc. where the logger
housing may not be directly placed (e.g. high temperatures). Available in 2 lengths:
Order code:
MOK-01-DAT05
MOK-02-DAT05
1m
2m
USB Adaptor for HygroLog
The current generation of PCs often do not feature serial ports any more. In such case, the
RS232 to USB adaptor may be used for the connection.
Set includes: Adaptor cable and CD ROM with driver
Order code:
12.02.1086
RS232 to USB Adaptor
Adaptor cables for HygroClip industrial probes
With these adaptor cables industrial HygroClip probes may be connected to the HygroLog,
HygroLog D and HygroLog NT loggers.
Order code:
T7-03-DAT05
T7-03-B5
3m adapter cable for HygroLog D
3m adapter cable for HygroLog NT
Software for HygroLog and HygroLog NT
Order code:
HygroData HL
HygroData NT-E
HygroData NT-P
Software & data cable for HygroLog / HygroLog-D
Software & data cable for HygroLog NT, standard version.
Software & data cable for HygroLog NT, professional version
with validation functions
23
HygroLog / HygroLog NT series
D
A
T
A
L
O
G
G
E
R
S
Technical Data
Feature
Humidity/temperature sensor
Operating range electronics
Humidity
Temperature
Operating range
Alkaline batteries
Lithium batteries
Measuring range
Precision at 23 °C
Optional output signals Logger
Standard output signals
via docking station
Power supply (recommended)
Mains adaptor
Battery life with
1 HygroClip probe,
15 Min. memory interval
no display
Display
Event Logging
Menu
Adjustment
Remote function
Docking station
Usable probes
Sensor protection
Housing material
Protection rating
Memory media
Memory capacity
with 16 MB Flash Card
Log interval
Memory modes
Alarm indicators
Dimensions Logger
Theft protection
Dimensions of docking station
Weight Logger
Docking station/Wall holder
NT-Desk stand
System requirements
Processor
RAM
Hard disk capacity
Monitor
Operating systems
Software for programming
and analysis
Compliance
24
HygroLog NT1
Integrated probe
HygroLog NT2
HygroLog NT3
ROTRONIC HygroClip series
0…100 %rh
-30...70 °C, with display -10...60 °C
HygroLog
HygroLog D
-30...70 °C
-10...50 °C
-10...+50 °C (factory assembly)
-30...+70 °C
probe dependent, from -50…200 °C
probe dependent, best ±1 %rh
none
Bluetooth
none
none
RS232, RS485, USB
RS232
RS232
9 V battery ≥500 mAh
Possible with docking Station
3 x 1.5 V AA -AM3-LR6
With wall mounting bracket
> 1 year
Approx. 1 year
Approx. 1/2 year
LCD full graphic display (option)
No
LCD,
alphanumerical
All operator actions, alarms, programming
Operator guidance, simple programming, retrieval
Probe adjustment possible with probe in logger
Display of measurement values on a second
HygroLog NT for devices without display
Various options, see page 19
N/A
HygroClip probes Pt100 probes
(with docking station)
Integrated
Wire mesh filter
ABS
IP65
Flash Card 16 MB included. Possible up to 1 GB
400,000 measurement values in text mode
752,000 measurement values in protected mode
Selectable from 5 s to 24 h
Start/Stop, text mode, protected mode
Optical indicator (LED, red /green), beeper
155 x 106 x 37 mm
Integrated in docking station
110 x 70 x 37 mm
Approx. 300 g
N/A
N/A
N/A
Approx. 175 g
-10...+50 °C
N/A
Wall mounting bracket with supply
HygroClip probes
EEPROM
10000 values
15 s...120 min
Start/Stop or loop mode
no
Visual indication
140 x 85 x 25 mm
Option (184 x 90 x 25 mm)
178 x 90 x 33 mm
ca. 200 g
HygroLog IPH: 140 g
HygroLog IPH-2: 100 g
Approx. 350 g
(The indicated values are minimal values. The program may be installed and will run.
For work with optimal speed, we recommend to use more powerful PCs.
Pentium 2 with processor speed of min. 450 MHz
Pentium 90 MHz or better
min. 128 MB
min. 64 MB
Min. 50 MB free
Min. 20 MB free
VGA or SVGA
Windows 98, XP, NT4, with service pack 6a or higher
Windows 2000-family with service pack 2 or higher
Windows 95/98/2000/NT/XP
Windows Server 2003 or higher
ROTRONIC HW4
ROTRONIC HW3
FDA CFR21 Part 11 / GAMP4
FDA CFR 21/11
Agent-D Series Humidity and temperature logger
D
The Agent-D series is a versatile family of dataloggers with integrated LC display for the measurement of humidity and temperature with both integrated and cable mounted sensors. Measurement ranges and logging interval can be configured with easy-to-use
Windows software, or via the integrated keypad. A special version is available for hazardous areas (Zone 1).
A
T
All versions feature a 64000 point memory, user replaceable batteries and the operating range of the logger is -35…55 °C / 0…100 %rh.
Measurement range depends on the probe configuration (see Probes for Agent-D-NT & PT Series). When an extension cable is used, the
maximum temperature is 70 °C.
A
Agent-D-HT2
O
2-channel humidity and temperature logger
G
• Integrated probe for temperature / humidity Agent-D-Clip-S
• Optional remote probe for humidity and temperature
• Measuring range with:
– integrated probe: -35…55 °C / 0…100 %rh
– remote probe: -35…70 °C / 0…100 %rh
• Single digital input for monitoring doors etc (switch status)
G
Order code:
Agent-D-HT2
Agent-D-HT2-EX
Agent-D-Clip S
S
L
E
R
includes probe Agent-D-Clip-S
(for EX-zone 1) includes probe Agent-D-Clip-S
Humidity/Temperature probe
Remote cable for Agent-D-HT2
Remote cables for 1 or 2 Agent-D-Clip probes for D-sub connectors
Lengths: 2 or 5 m
Order code:
Agent-D-D12
Agent-D-D22
Agent-D-D15
Agent-D-D25
2 m / 1 probe
2 m / 2 probes
5 m / 1 probe
5 m / 2 probes
Agent-D-NT3
3-channel temperature logger for NTC probes
• 1 integrated NTC temperature sensor
• 2 external NTC probes connected by D-sub-15 plug (Option)
• Measuring range: -50…140 °C
Order code:
Agent-D-NT3
Agent-D-NT3-EX
(for EX-Zone 1)
Probes for Agent-D-NT series
Universal NTC probe
Universal NTC probe:
-50...140 °C, 2 m cable, T max. cable: 140 °C
Order code:
AC3010-ND1
AC3010-ND2
1 probe on D-sub connector
2 probes on D-sub connector
Miniature NTC bead probe
Miniature NTC bead probe
-50...140 °C, 2 m cable, T max. cable: 140 °C
Order code:
AC3055-ND1
AC3055-ND2
1 probe on D-sub connector
2 probes on D-sub connector
NTC surface probe
NTC surface probe
-50...140 °C, 2 m cable, T max. cable: 140 °C
Order code:
AC3041-ND1
1 probe on D-sub connector
25
Agent HOTB-1 / Accessories / Technical data
D
A
Agent-HOTB-1
T
Autonomous humidity/temperature logger for use in temperatures up to 105 °C
A
Main features:
L
•
•
•
•
O
G
•
•
•
•
G
E
Highly robust aluminium housing
Memory for 64,000 measurement values
3-channels: 1 humidity/temperature probe integrated, 1 temperature probe optional
Ranges: integrated probe: 0..100 %rh, -35..105 °C (105°C up to 1 hour, long-term
recording 95°C)
Range of external NTC-probe: -50…140 °C
Ideally suited for the logging of drying processes
Simple handling, quick programming
Graphical and tabular display of measurement data
Order codes:
Agent-HOTB-1
Agent-HOTB-Data
Agent-D-SW
R
S
High temperature logger
Data cable for data retrieval
Application software
Accessories for Agent- series:
Order codes:
Agent-D-SW
Agent-D-UP
Agent-D-IPH
Agent-D-IPH-L
Agent-D-AL
Agent-D-Bat
Application software multilingual
Software Update
Wall mounting bracket
Wall mounting bracket lockable
Connector with screw terminals
Lithium battery for Agent-D
Technical data Agent Logger
Features
Humidity sensor
Temperature sensor
Agent-D-HT2
Hygromer® AC-1
NTC
Agent-D-NT3
N/A
NTC
Sensor protection
Wire mesh filter in
plastic cage
N/A
Agent-HOTB-1
Hygromer® AC-1
1 NTC integrated,
1 NTC optionally
Wire mesh filter in
plastic cage
Specifications
Operating range (electronics)
Measuring range (probes)
Precision at 23 °C
Repeatability
Standard output signals
Power supply
Battery lifetime
Housing material
Protection rating
EX protection zone 1 (optional)
Memory size / Memory type
Log interval
Memory modes
Alarm indicators
Dimensions
Weight
PC System requirements
Processor
RAM
Monitor
Operating systems
Software for programming
and Analysis
26
0...100 %rh
/ -35...55 °C 0…100 %rh
0...100 %rh, -50...140 °C;
-200...550 °C
probe dependent
with extension cable
±1.5 %rh / 0.3K
±0.3 K
<0.5 %rh / < 0.1 K
RS232
1 x Lithium battery 3.6 V
Up to 2 years (depending on measurement and read-out interval)
ABS
IP63
Order code each Agent-D-....EX
64,000 Measurement values / RAM
1 s...180 min
Start / Stop or loop
Optical indicator
135 x 85 x 35 mm
110 x 85 x 35 mm
Approx. 160 g
Approx. 160 g
Pentium 233 MHz or better
64 MB
VGA or SVGA
Windows 95 / 98 / 2000 / NT / XP
Agent-D-SW
0...100 %rh
-40…105 °C (max. 1h)
-40…95 °C (> 1h)
0…100 %rh
probe dependent
±1.5 %rh / 0.3K
Anodized Aluminium
IP65
N/A
N/A
150 x 780 x 27 mm
Approx. 225 g
Dimensional diagrams and schematics
D
A
HygroLog / HygroLog D
HygroLog NT
T
A
85
25
L
O
140
G
G
E
R
S
Agent-D-HT2
13 8
9
RxD
Busy
NTC1
NTC2
D1, 2
DigitIn
Alarm
NTC
+Ref
A
B
C
D
GND
+Ref
DigitIn
Alarm +
34
111.5
58
1
15
14
13
12
11
10
9
84
15
GND
TxD
+ Ref.
A1
A2
B1
B2
C1, 2
34
8
8
7
6
5
4
3
2
1
F1
F2
F3
GND
Interchangeable probe for
Humidity and temperature
0…50VDC, max. 200mA
Agent-D-NT3
NTC sensor integrated in logger housing
9
1
4
3
Res
NTC3
11
10
2
1
+Ref
NTC1
9
RxD
Busy
Res.
Start/
Inpos
Ubat
Alarm
Reset
Alarm
34
111 .5
NTC
+Ref
58
15
14
13
12
UBat
84
15
GND
TxD
NTC2
+Ref
Start/Inpos
Ubat
Alarm Reset
34
8
8
7
6
5
Agent-HOTB-1
69
Connector
1
GND
5
2
TXD
2
3
RX2
3
4
NTC2
5
NTC2
45
3
4
2
150
1
26
28
5
Seen from soldering side
NTC2-Sensor
27
Download PDF
Similar pages