ProSafe® 24-, 48-port Gigabit Preliminary Smart Switches with

ProSafe® 24-, 48-port Gigabit
Smart Switches with Advanced Features
GS724AT, GS748AT
Preliminary
Data Sheet
Enabling Small and Mid-sized Businesses to Effectively Manage
Bandwidth and Security
NETGEAR ProSafe® Advanced Smart Switches provide small and mid-sized companies with a
viable alternative to fully managed switches. This range of switches provide customers with all
the features typically found in fully managed switches, without adding complexity or additional costs.
Growing small and mid-sized companies rely on their network to provide the foundation
for essential business applications: mission-critical data applications, security, Voice over IP
(VoIP), video-conferencing and much more. They need full-featured network switches that can
accommodate and manage growth, support the full range of network applications and secure
the network without the overhead and complexity of fully managed switches. The GS724AT
and GS748AT ProSafe Gigabit Smart Switches with Advanced Features deliver the scalability,
flexibility, reliability, and performance growing small and medium-sized businesses need in an
affordable and easy-to-manage package.
Each ProSafe Gigabit Smart Switch with Advanced Features comes with either 24 or 48
10/100/1000 ports with four shared SFP ports, respectively, that provide high performance for
bandwidth-intensive applications like ERP and large file transfers. In addition, these switches
come with a complete suite of advanced features for more robust security, higher quality of
service and high availability. These switches are equipped with highly advanced features such
as access control lists (ACL), 802.1x port authentication, enhanced QoS, Auto-voice VLAN, rate
limiting and IGMP snooping among others to provide a small and medium-sized business with a
network that is geared for growth while providing scalability and reliability.
An intuitive, Web-browser interface provides simple yet comprehensive management, making it
a snap to fully realize the potential of the rich feature-set offered by these switches. Why buy fully
managed stackable network switches designed and priced for the enterprise? NETGEAR ProSafe
Gigabit Smart Switches with Advanced Features are designed for small and growing businesses.
Advanced Security
These switches provide advanced features that provide more robust security to the SMBs.
These include:
• 802.1x for authentication
• ACL filtering to permit or deny traffic based on MAC, IP and TCP/UDP addresses.
24 / 7
*Optional modules include AGM731F ProSafe 1000BASE-SX SFP GBIC, AGM732F ProSafe 1000BASE-LX SFP GBIC,
AGM733 ProSafe 1000BASE-LZ SFP GBIC
TECHNICAL
S U P P O R T*
1-888-NETGEAR (638-4327)
Email: info@NETGEAR.com
*
ProSafe® 24-, 48-port Gigabit Smart Switches with Advanced Features FVX538 ProSafe®
VPN Firewall 200
Internet
rnet
GS724AT ProSafe®
24-port Gigabit Smart Switch
GS724AT , GS748AT
Notebook PC’s with
GA511 Gigabit Cards
Bro
Broadband
B
roadb
adba
db
band
modem
NMS100 ProSafe® Network
Management Software
PDA
WG302
ProSafe 802.11g
Wireless Access Point
Servers with
GA311 Gigabit Cards
Desktop PC’s with GA311 Gigabit Cards
Wireless Notebook PC's with
WG511T Wireless Adapters
Advanced Quality
of Service (QoS)
Priority queuing ensures high-priority traffic gets delivered efficiently, even during congestion
from high-traffic bursts. Companies implementing network telephony or video conferencing,
for example, need to be able to prioritize such voice and video traffic and other real-time
applications over less latency-sensitive traffic to ensure reliability and quality. The ability to
prioritize traffic ensures quality of latency-sensitive services and applications despite increasing
traffic loads. The ProSafe Gigabit Smart Switches with Advanced Features provide an extensive
set of QoS features:
• 802.1p-based prioritization
• Layer 3-based (DSCP, TOS) prioritization
• Auto-Voice VLAN
• Rate-limiting
‘Smart’ Management Features
Manage all ProSafe Gigabit Smart Switches with Advanced Features from an easy-to-use Web
console that can be used to configure all features, as well as monitor and troubleshoot. These
switches also have SNMP (v1, 2c and 3) to collect and track data to monitor the network health,
as well as manage devices, and more easily enforce critical IT controls and policies. SNMP v2c is
most commonly deployed, as it provides better reporting capabilities than SNMP v1. Companies
interested in more robust security may opt for SNMP v3, which provides data encryption.
The ProSafe Gigabit Smart Switches with Advanced Features provide world-class reliability with a
NETGEAR Lifetime Warranty and optional ProSupport Maintenance Packages. These switches are
optimized for ProSafe Network Management Software (NMS100) and work with other SNMP-based
management software.
ProSafe® 24-, 48-port Gigabit Smart Switches with Advanced Features Technical Specifications
•Network Protocol and
Standards Compatibility:
––IEEE 802.3 10BASE-T
––IEEE 802.3u 100BASE-TX
––IEEE 802.3ab 1000BASE-T
––IEEE 802.3z 1000BASE-X
––IEEE 802.3x full-duplex flow control
•Interfaces
––24 or 48 10/100/1000 Mbps
switching ports
––4 built-in shared SFP Gigabit
Ethernet fiber ports for
100/1000 Mbps connectivity
––Auto-sensing and auto-negotiating
capabilities for all copper ports
––Auto Uplink™ on all ports to make the
right connection
•Administrative Switch Management
––IEEE 8021.Q VLAN (128 groups, Static)
––Auto-Voice VLAN
––IEEE 802.1p Class of Service (CoS)
––IEEE 802.3ad static or dynamic link
aggregation (LACP)
––IEEE 802.1D Spanning Tree Protocol
––IEEE 802.1ab LLDP & LLDP-MED
––SNMP v1, v2c, v3
––RFC 1213 MIB II
––RFC 1643 Ethernet Interface MIB
––RFC 1493 Bridge MIB
––RFC 2131 DHCP client
––RMON group 1, 2, 3, 9
––Private Enterprise MIB
––IEEE 802.1x (RADIUS)
––RADIUS accounting
––Access control list (ACL)
––Layer 3 Quality of Service (QoS)
––TACACS+
––RADIUS accounting
––Port-based security by locked
MAC addresses
––Protected ports
––IGMP snooping
––Storm control for broadcast, multicast
and unknown unicast packets
––Port-based ingress/egress rate limiting
––SNTP
––Port mirroring support
––Web-based configuration
––Configuration backup/restore
––Password access control
––Firmware upgradeable
––Cable test
•Performance Specifications
––Forwarding modes: Store-and-forward
––Bandwidth:
- GS724AT - 48 Gbps
- GS748AT - 98 Gbps
––Network latency: Less than 3
microseconds for 64-byte frames in
store-and-forward mode for 1000
Mbps to 1000 Mbps transmission
––Buffer memory:
- GS724AT - 3 MB
- GS748AT - 6 MB
–– Address database size: 8,000 media access
control (MAC) addresses per system
––Addressing: 48-bit MAC address
––Mean time between failures (MTBF):
- GS724AT - 330,000 hours
(~37 years)
- GS748AT - 208,700 hours
(~ 23.8 years)
––LEDs
––Unit: Power, fan
––Per port: Link, speed, activity
––Per Gigabit port: Link, speed,
activity
GS724AT, GS748AT
•Power Supply
––Power consumption:
- GS724AT - 35.6W
- GS748AT - 66.9W
–– 100-240V AC/50-60 Hz universal input
•Physical Specifications
––Dimensions (h x w x d):
- GS724AT: 43 x 440 x 205 mm
(1.7 x 17.3 x 8.1 in)
- GS748AT: 43 x 440 x 257 mm
(1.7 x 17.3 x 10.1 in)
––Weight:
- GS724AT: 3.1 kg (6.83 lb)
- GS748AT: 5.0 kg (11 lb)
•Environmental Specifications
––Operating temperature: 32° to 131° F
(0° to 55° C)
––Storage temperature: -4° to 158° F
(-20° to 70° C)
––Operating humidity: 90% maximum
relative humidity, non-condensing
––Storage humidity: 95% maximum
relative humidity, non-condensing
––Operating altitude: 10,000 ft
(3,000 m) maximum
––Storage altitude: 10,000 ft
(3,000 m) maximum
•Electromagnetic Compliance
––CE mark, commercial
––FCC Part 15 Class A
––VCCI Class A
––EN 55022 (CISPR 22)
––EN 55024 (CISPR 24)
––C-Tick
•Safety
––CE mark, commercial
––CUL 60950 (Listed)/ EN 60950
(Low Voltage Directive)
ProSafe® 24-, 48-port Gigabit Smart Switches with Advanced Features GS724AT, GS748AT
Warranty
––NETGEAR Lifetime Warranty†
System Requirements
––Category 5 network cables
––Network card for each PC
––Network software (e.g., Windows®)
Package Contents
––ProSafe 24-or 48-port Gigabit Smart
Switch with Advanced Features
(GS724AT or GS748AT)
––Rubber footpads
––Power cord
––Rack-mount kit
––Resource CD installation guide with
Smart Wizard Discovery program
––Warranty/support information card
Modules
––AGM731F ProSafe 1000BASE-SX
SFP GBIC: Module with LC connectors
for 50um or 62.5um multi-mode
fiber cable
––AGM732F ProSafe 1000BASE-LX SFP
GBIC: Module with LC connectors for
9um single-mode fiber cable
––AGM733 ProSafe 1000BASE-LZ SFP
GBIC: Module with LC connectors for
9um single-mode fiber cable
Ordering Information
––GS724AT
North America: GS724AT-100NAS
Europe: GS724AT-100EUS
Australia: GS724AT-100AUS
Asia: GS724AT-100JPS
––GS748AT
North America: GS748AT-100NAS
Europe: GS748AT-100EUS
Asia: GS748AT-100AJS
ProSupport Service Packs Available
•OnCall 24x7, Category 1
––PMB0331-100 (U.S. only)
––PMB0331
•XPressHW, Category 1
––PRR0331
350 E. Plumeria Drive
San Jose, CA 95134-1911 USA
1-888-NETGEAR (638-4327)
E-mail: info@NETGEAR.com
www.NETGEAR.com
© 2008 NETGEAR, Inc. NETGEAR, the NETGEAR Logo, NETGEAR Digital Entertainer Logo, Connect with Innovation, FrontView, IntelliFi,
PowerShift, ProSafe, RAIDar, RAIDiator, X-RAID, RangeMax, ReadyNAS and Smart Wizard are trademarks of NETGEAR, Inc. in the United
States and/or other countries. Other brand names mentioned herein are for identification purposes only and may be trademarks of their
respective holder(s). Information is subject to change without notice. All rights reserved.
*Free basic installation support provided for 90 days from date of purchase. Advanced product features and configurations are not included
in free basic installation support; optional premium support available.
†
Lifetime warranty for product purchased after 05/01/2007.
D-GS724AT/GS748AT-3
Download PDF
Similar pages