2.0 General Motors India Pvt. Ltd. All information, illustrations and specifications contained in this Owner's Manual are based on the latest production information available at the time of publication. The right is reserved to make changes at any time without notice. 24 Hr. Helpline at 1800 3000 8080 Part No.: 28286840 Revision No. 00 Revision Date 02/2014/1,000 MY14 Regd. Office / Works : Chandrapura Industrial Estate, Halol - 389 351. Dist. Panchmahals, Gujarat, India. Phone : +91 2676 221000 Marketing Office / Customer Assistance : Plot No. 15, Echelon Institutional Area, Sector 32, Gurgaon - 122001, Haryana, India. Phone : +91 124 3080000 2.0 General Motors India Pvt. Ltd. All information, illustrations and specifications contained in this Owner's Manual are based on the latest production information available at the time of publication. The right is reserved to make changes at any time without notice. 24 Hr. Helpline at 1800 3000 8080 Part No.: 28286840 Revision No. 00 Revision Date 02/2014/1,000 MY14 Regd. Office / Works : Chandrapura Industrial Estate, Halol - 389 351. Dist. Panchmahals, Gujarat, India. Phone : +91 2676 221000 Marketing Office / Customer Assistance : Plot No. 15, Echelon Institutional Area, Sector 32, Gurgaon - 122001, Haryana, India. Phone : +91 124 3080000 2.0 General Motors India Pvt. Ltd. All information, illustrations and specifications contained in this Owner's Manual are based on the latest production information available at the time of publication. The right is reserved to make changes at any time without notice. 24 Hr. Helpline at 1800 3000 8080 Part No.: 28286840 Revision No. 00 Revision Date 02/2014/1,000 MY14 Regd. Office / Works : Chandrapura Industrial Estate, Halol - 389 351. Dist. Panchmahals, Gujarat, India. Phone : +91 2676 221000 Marketing Office / Customer Assistance : Plot No. 15, Echelon Institutional Area, Sector 32, Gurgaon - 122001, Haryana, India. Phone : +91 124 3080000 2.0 General Motors India Pvt. Ltd. All information, illustrations and specifications contained in this Owner's Manual are based on the latest production information available at the time of publication. The right is reserved to make changes at any time without notice. 24 Hr. Helpline at 1800 3000 8080 Part No.: 28286840 Revision No. 00 Revision Date 02/2014/1,000 MY14 Regd. Office / Works : Chandrapura Industrial Estate, Halol - 389 351. Dist. Panchmahals, Gujarat, India. Phone : +91 2676 221000 Marketing Office / Customer Assistance : Plot No. 15, Echelon Institutional Area, Sector 32, Gurgaon - 122001, Haryana, India. Phone : +91 124 3080000 Dear Customer, Welcome to the Chevrolet family. We wish to thank you for choosing Chevrolet Cruze. It is our constant endeavor to provide you with products that offer excellent performance through out their ownership period. Which is why, in addition to offering great cars, we have also set up an extensive, and very well equipped network of retailers and authorized service centres across the country. Naturally, these Chevrolet retailers knows everything there is to know about your car, and provides you with the best service possible. In fact, every retailer is equipped with the most advanced technology, technicians specially trained by us, and genuine spares. Needless to say, they are also committed to ensure your complete satisfaction. So, please contact a Chevrolet retailer for any servicing need and make sure that only genuine spares are used for your car. This Manual will familiarize you with the operation and maintenance of your new vehicle. It will also provide you with important safety information. Please do read it carefully and follow the recommendations. In fact, the Manual is like a permanent part of your car. And it would go a long way in ensuring a safe and trouble-free operation for your car. Should you have any query please feel free to call our 24 hr. Helpline at 1800 3000 8080 or email us at : email@example.com. Happy Motoring CONTENTS Introduction....................................... 2 Keys, doors and windows ............... 17 Seats, restraints ............................... 35 Storage ............................................ 51 Instruments and controls ................. 57 Lighting .......................................... 79 Climate control ............................... 85 Driving and operating .................... 91 Vehicle care .................................. 109 Infotainment system ..................... 141 Service and maintenance .............. 163 Technical data .............................. 169 Service and warranty .................... 175 Service network ........................... 205 2 Introduction INTRODUCTION INTRODUCTION USING THIS MANUAL Introduction ...................................... 2 Using this Manual ............................. 2 Danger, warnings and cautions ......... 3 In brief............................................... 4 Vehicle unlocking ............................. 4 Seat adjustment (Manual) ................ 5 Seat adjustment (Power) .................. 6 Head restraint adjustment ................ 7 Seat belt ............................................ 7 Mirror adjustment ............................ 7 Steering wheel adjustment ............... 8 Instrument panel overview ............... 9 Exterior lighting ............................. 11 Horn ............................................... 12 Windscreen wiper/washer .............. 12 Climate control ............................... 13 Transmission .................................. 14 Starting off ..................................... 14 Parking ........................................... 16 Your vehicle is a designed combination of advanced technology, safety, environmental friendliness and economy. This Owner's Manual provides you with all the necessary information to enable you to drive your vehicle safely and efficiently. Make sure your passengers are aware of the possible risk of accident and injury which may result from improper use of the vehicle. You must always comply with the specific laws and regulations of the country that you are in. These laws may differ from the information in this Owner's Manual. When this Owner's Manual refers to a CHEVROLET retailer visit, we recommend your CHEVROLET Service Partner. All CHEVROLET Service Partners provide first-class service at reasonable prices. Experienced mechanics trained by CHEVROLET work according to specific CHEVROLET instructions. The customer literature pack should always be kept ready to hand in the vehicle. n This Manual describes all options and features available for this model. Certain descriptions, including those for display and menu functions, may not apply to your vehicle due to model variant, country specifications, special equipment or accessories. n The "In brief" section will give you an initial overview. The table of contents at the beginning of this Manual and within each chapter shows where the information is located. The Owner's Manual uses the factory engine designations. The corresponding sales designations can be found in the chapter "Technical data". Directional data, e.g. left or right, or front or back, always relate to the direction of travel. The vehicle display screens may not support your specific language. n n n n Introduction 3 n Depending on the model variant, country variant, integrated special equipment and accessories, the scope of equipment of your vehicle can differ from the descriptions in this Owner's Manual. DANGER, WARNINGS AND CAUTIONS Danger Text marked Danger provides information on risk of fatal injury. Disregarding this information may endanger life. Warning Text marked Warning provides information on risk of accident or injury. Disregarding this information may lead to injury. Caution Text marked Caution provides information on possible damage to the vehicle. Disregarding this information may lead to vehicle damage. Symbols Page references are indicated with means "see page". Note: Text marked Note indicates a point to take into account when operating the vehicle. Failure to observe this may lead to incorrect operation. * or (Option): The asterisk and (Option) in this Manual signify an item of equipment that is not included on all vehicles. Such items include engine options, model variations specific to one country, and optional equipment. All information, illustrations, and specifications in this Manual are based on the latest product information available at the time of publication. General Motors India Pvt. Ltd. (GMI) reserve the right to change specifications or designs at any time without notice and without incurring obligation. This vehicle may not comply with the standards or regulations of other countries. Before attempting to register this vehicle in any other country, check all applicable regulations and make any necessary modifications. This Manual describes the options and trims available at the time of publication. Some of the items covered may not apply to your vehicle. Contact your CHEVROLET retailer for information on options and trims availability. Non-GMI genuine parts and accessories have not been examined or approved by GMI. We can certify neither the suitability nor the safety of non-GMI genuine parts and accessories and are not liable for damage caused by their use. Warning: Tampering of wiring harness or fitment of non genuine accessories in your vehicle may lead to short circuit resulting in fire. We wish you many hours of pleasurable driving Chevrolet. 4 Introduction IN BRIEF VEHICLE UNLOCKING INITIAL DRIVE INFORMATION RADIO REMOTE CONTROL ELECTRONIC KEY* Press button c to unlock the doors and load compartment. Open the doors by pulling the handles, to open the tailgate, press the button under the tailgate moulding. Press button , only the load compartment is unlocked and opens. Radio remote control 3 17, Central locking system 3 20, Load compartment 3 25. The operator must keep the electronic key with him. Press switch on door handle to unlock the vehicle and pull the door handle to open the door. To open the tailgate, press the button under the moulding. Electronic key system 19. Introduction 5 SEAT ADJUSTMENT (Manual) SEAT POSITIONING SEAT BACKREST SEAT HEIGHT* Pull handle, slide seat, release handle. Seat adjustment 37, Seat position00 36. Pull lever, adjust inclination and release lever. Allow the seat to engage audibly. Do not lean on backrest when adjusting. Seat adjustment 37, Seat position00 36. Lever pumping motion Up = Higher Down = Lower Seat position 36. 6 Introduction SEAT ADJUSTMENT (Power)* Driver side SEAT BACKREST Warning Care must be taken when operating the power seats. There is a risk of injury, particularly for children. Articles could become trapped. Never leave the remote control in the vehicle when leaving the vehicle! Risk of injury to unsupervised persons in event of power seat adjustment. Keep a close watch on the seats when adjusting them. Vehicle passengers should be informed accordingly. SEAT POSITIONING To move the seat forward or backward, move and hold the switch forward or backward. When the seat reaches the desired position, release the switch. SEAT HEIGHT To adjust the height of the entire seat cushion, move the switch upwards or downwards at rear. SEAT INCLINATION To adjust the inclination of the seat cushion, move the switch upwards or downwards at front. Pull lever, adjust inclination and release lever. Allow the seat to engage audibly. Do not lean on seat when adjusting. Overload If the seat setting is electrically overloaded, the power supply is automatically cut off for a short time. Introduction 7 HEAD RESTRAINT ADJUSTMENT SEAT BELT For height adjustment, pull the head restraint upward. To move down press the catch and push the head restraint downwards. Head restraints 35. Pull out the seat belt and engage in belt buckle. The seat belt must not be twisted and must fit close against the body. The backrest must not be tilted back too far (maximum approx. 25 °). To release belt, press red button on belt buckle. Seat belts 40, Airbag system 43, Seat position 36. MIRROR ADJUSTMENT INTERIOR MIRROR To reduce dazzle, pull the lever on the underside of the mirror housing. Interior mirror 29, Automatic antidazzle interior mirror* 30. 8 Introduction EXTERIOR MIRRORS Select the relevant exterior mirror and adjust. Electric adjustment 28, Convex exterior mirrors 28, Folding exterior mirrors 28, Heated exterior mirrors 29. STEERING WHEEL ADJUSTMENT* Unlock lever, adjust steering wheel, then engage lever and ensure it is fully locked. Do not adjust steering wheel unless vehicle is stationary and steering wheel lock has been released. Airbag system 43, Ignition switch positions 92. Introduction 9 INSTRUMENT PANEL OVERVIEW 2 30 14 9 15 13 16 12 17 11 10 9 3 6 18 19 29 21 24 26 25 22 5 4 20 7 23 8 27 2 1 28 10 Introduction 1 2 3 4 5 Light switch ............................. 79 Front fog Lamp ........................ 81 Headlamp range adjustment ..... 81 Instrument panel illumination control ...................................... 82 Side air vents ............................ 88 Windscreen wiper/washer ........ 58 Instruments ............................... 63 Horn ......................................... 58 Driver's airbag system .............. 44 6 7 Driver information center ........ 72 Remote control for infotainment system ............... 145 Turn signals, headlight flash, low beam and high beam ......... 79 Exit lighting ............................. 83 Driver information center ........ 72 9 Centre air vents ........................ 88 10 Infotainment system ............... 141 11 Info-Display ............................. 72 8 12 Anti-theft alarm system status LED ................................ 26 13 Storage ..................................... 51 14 Front passenger airbag ............. 44 15 Glove box ................................. 52 16 Electronic climate control system ....................................... 85 17 Selector lever, automatic transmission ............................. 99 Manual transmission .............. 101 18 Hazard warning flashers .......... 80 19 Central locking button ............. 23 20 Accelerator pedal ..................... 91 21 Start/Stop button electronic key system ................................ 94 22 Brake pedal ............................ 102 23 Ignition switch with steering wheel lock ................................ 92 24 Clutch pedal ............................. 91 25 Steering wheel adjustment ....... 57 26 Cruise control ......................... 103 27 28 29 30 Storage compartment ............... 51 Bonnet release lever ............... 111 Fan speed .................................. 87 Instrument panel fuse box ...... 127 Introduction 11 EXTERIOR LIGHTING LIGHT SWITCH HEADLIGHT FLASH, HIGH BEAM AND LOW BEAM TURN AND LANE-CHANGE SIGNALS To turn the head, tail and parking lamps on or off, rotate the knob clockwise and counter clockwise. The knob has three positions which activate various lamp functions as follows : Turn light switch: = Lights off. = Position lights. = Headlights Press : = Front fog lights Lighting 79. Headlight flash = Pull lever High beam = Push lever Low beam = Push or pull lever High beam 79, Headlight flash 80. Right = Lever down Left = Lever up Turn and lane change signals 80. 12 Introduction WINDSCREEN WIPER/ WASHER HORN HAZARD WARNING FLASHERS Operated with the button. Hazard warning flashers 80. WINDSCREEN WIPERS Press . = = Off Timed interval wiping or automatic wiping with rain sensor* = Slow = Fast For a single wipe when the windscreen wipers are off, press the lever up. Windscreen wipers 58, Wiper replacement 117. Introduction 13 CLIMATE CONTROL WINDSCREEN WASHER SYSTEM HEATED REAR WINDOW, HEATED EXTERIOR MIRRORS* DEMISTING AND DEFROSTING THE WINDOWS Pull lever. Windscreen washer system Washer fluid 116. Heating is operated by pressing the Ü button with engine running. Heated rear window 32. Press button . Set temperature control to warmest level. Cooling on. Heated rear window on. Electronic climate control system 85. 60, 14 Introduction TRANSMISSION MANUAL TRANSMISSION STARTING OFF AUTOMATIC TRANSMISSION CHECK BEFORE STARTING OFF n n + _M R N D P n n n Reverse : With the vehicle stationary, declutch and then pull up the ring on the selector lever and engage the gear. If the gear does not engage, set the lever in neutral, release the clutch pedal and depress again; then repeat gear selection. Manual transmission 101. P = Park R = Reverse N = Neutral D = Drive Manual mode: Move selector lever from D to the left. = Higher gear = Lower gear The selector lever can only be moved out of P when the ignition is on and the brake pedal is applied. To engage P or R, push the release button. Automatic transmission 98. Tyre pressure and condition 129 3 172. Engine oil level and fluid levels 3 113. All windows, mirrors, exterior lighting and number plates are free from dirt, snow and ice and operational. Proper position of seats, seat belts and mirrors 36, 40, 28. Check brake function at low speed, particularly if the brakes are wet. Introduction 15 STARTING ENGINE WITH THE IGNITION SWITCH STARTING ENGINE WITH THE START/STOP BUTTON* Turn key to position 3 and release when engine is running. Before restarting or to switch off the engine, turn key back to 0. n n n n n n n Turn key to position 1. Move the steering wheel slightly to release the steering wheel lock. Manual transmission: Operate clutch; Automatic transmission: Operate brake and move selector lever in P or N; Do not accelerate; Diesel engine: Turn the key to position 2 for preheating until control indicator goes out; The electronic key must be in the vehicle interior or the operator carries the key around with him; n Manual transmission: Operate clutch; n Automatic transmission: Operate brake and move selector lever in P or N; n Do not accelerate; n 16 Introduction PARKING Press Start/Stop button and release when the engine is running. The green LED will illuminate as soon as the engine is running. Press button again while engine is running to switch off the engine. Starting the engine 93. n Always apply parking brake without pressing release button. Apply as firmly as possible on a downhill slope or uphill slope. Operate foot brake at same time to reduce operating force. n Switch off the engine and ignition. Turn the ignition key to 0, remove and turn the steering wheel until the steering wheel lock is felt to engage. Vehicles with electronic key system: With the vehicle stationary, press the Start/Stop button and open the driver's door. For vehicles with automatic transmission, move selector lever to P position and remove key. n If the vehicle is on a level surface or uphill slope, engage first gear or set the selector lever to P before switching off the ignition. On an uphill slope, turn the front wheels away from the kerb. If the vehicle is on a downhill slope, engage reverse gear or set the selen ctor lever to P before switching off the ignition. Turn the front wheels towards the kerb. n Close windows and sunroof. n Lock the vehicle with button on the remote control or, with electronic key system, press the switch on the door handle. n Activate the anti-theft alarm system 3 25. n Do not park the vehicle on an easy flammable surface. The high temperature of the exhaust system could ignite the surface. n The engine cooling fans may run after the engine has been switched off . n After running at high engine speeds or with high engine loads, operate the diesel engine briefly at a low load or run in neutral for about 1 to 2 minutes at idle speed before switching off in order to protect the turbocharger. Keys, locks 17. Keys, doors and windows 17 KEYS, DOORS AND WINDOWS Keys, locks ..................................... 17 Doors .............................................. 25 Vehicle security .............................. 25 Exterior mirrors .............................. 28 Interior mirror ................................ 29 Power windows .............................. 30 Heated rear window ....................... 32 Sunvisors ........................................ 32 Sunroof ........................................... 33 KEYS, LOCKS KEYS RADIO REMOTE CONTROL Replacement keys The key number is specified on a detachable tag. The key number must be quoted when ordering replacement keys as it is a component of the immobiliser system. Locks 138 Key with foldaway key section Used to operate: n Central locking system n Anti-theft alarm system Load compartment The radio remote control has a range of approx. 25 metres. This range can be affected by outside influences. The hazard warning flashers confirm operation. n Press button to extend. To fold the key, first press the button. 18 Keys, doors and windows Handle with care, protect it from moisture and high temperatures and avoid unnecessary operation. Fault If the central locking system cannot be operated with the radio remote control, it may be due to the following: n Range exceeded, n Battery voltage too low, n Frequent, repeated operation of the remote control while not in range, which will require resynchronisation, Overloading the central locking by operating at frequent intervals, the power supply is interrupted for a short time, n Interference from higher-power radio waves from other sources. Opening the vehicle 20. Basic settings Some settings can be changed in the menu Settings in the Info-Display. Vehicle personalisation 76. Radio remote control battery replacement Replace the battery as soon as the range reduces. Batteries do not belong in household waste. They must be disposed of at an appropriate recycling collection point. n Extend the key and open the unit. Replace the battery (battery type CR 20 32), paying attention to the installation position. Close the unit and synchronise. Have the battery replaced by a CHEVROLET retailer. Note In order to keep the key working properly, follow these guidelines: n Avoid dropping the key. n Do not place heavy objects on the key. n Keep the key away from water and direct sunlight. If the key gets wet, wipe it with a soft cloth. Keys, doors and windows 19 MEMORISED SETTINGS* By removing the key out of the ignition lock the settings are automatically saved for the used key: n Electronic climate control n Lighting n Infotainment system n Power door locks The saved settings are automatically used when the key is inserted into the ignition lock. Vehicle personalisation 76. ELECTRONIC KEY SYSTEM* Warning Do not press the Start/Stop button while driving. A driver could lose control of vehicle and brake power assistance would be cancelled, causing an accident. Also never leave infants, children and juveniles unattended in the vehicle. It may cause an unexpected accident. Caution Makes operation of the following possible without the use of the mechanical key n Central locking system, n Anti-theft alarm system, n Ignition and starter. The electronic key simply needs to be on the driver's person. Note Do not put the electronic key in the load compartment or in front of the Info-Display. Starting the engine 93. Pressing the Start/Stop button can start the engine when the electronic key is in the vehicle. Never leave children or any person who is unfamiliar with the vehicle alone. They could become involved in unexpected accidents. Switch the ignition off when you leave the vehicle and always carry the smart key. 20 Keys, doors and windows CENTRAL LOCKING SYSTEM Radio remote control The electronic key also has a radio remote control feature. Replacing battery in electronic key Replace the battery as soon as the system no longer operates properly or the range is reduced. The need for battery replacement is indicated by an error code in the Driver Information Center 72. Batteries do not belong in household waste. They must be disposed of at an appropriate recycling collection point. Replacing the battery 18. Replace the battery (battery type CR 20 32), noting the installation position. Engage caps. Radio remote control synchronisation The radio remote control synchronises itself automatically during every starting procedure. Fault If the central locking cannot be operated or the engine cannot be started, the cause may be one of the following: n Fault in remote control 18, n Electronic key out of reception range. To rectify the cause of the fault, change the position of the electronic key. Unlocks and locks doors, load compartment and fuel filler flap. A pull on an interior door handle unlocks and opens the door. Note In the event of an accident of a certain severity, the vehicle unlocks automatically. Unlocking Radio remote control Press button . Keys, doors and windows 21 It is configurable to unlock only the driver's door by pressing button once and to unlock all doors, load compartment and fuel filler flap by pressing button twice. Settings can be changed in the menu Settings in the Info-Display. Vehicle personalisation 76. The settings can be stored by the key being used, memorised settings 19. Electronic key system* Press switch on door handle to unlock the vehicle and pull the door handle to open the door, or press the button under the trunk lid moulding. The electronic key must be outside the vehicle, within a range of approximately one metre. When the doors are locked and the electronic key is within one metre of the door handle, pressing the lock/unlock switch on that door handle will unlock all the doors. To unlock the door from the driver's side, press the lock/unlock switch on the door handle. Press again within five seconds to unlock all passenger doors. Settings can be configured to unlock all doors from the driver's side by pressing the lock/unlock switch on the door handle once. To unlock all the doors from the passenger's side, press the lock/unlock switch on the door handle. It is configurable to unlock only the doors on the relevant side or all doors. Settings can be changed in the menu Settings in the Info-Display. Vehicle personalisation 76. Locking Radio remote control Close doors, load compartment and fuel filler flap. Press button . If the driver's door is not closed properly, the central locking system will not work. Activation or deactivation of this function in the menu Settings in the Info-Display. Vehicle personalisation 76. 22 Keys, doors and windows Electronic key system* Press the switch on a door handle. The electronic key must be outside the vehicle, within a range of approximately one meter. If the other electronic key is inside the vehicle, doors are locked and the key inside the vehicle will be deactivated. It can be checked that the door is locked or unlocked as the position of the door lock knob inside your vehicle. 3 seconds must pass before the vehicle can be unlocked. Within this time, it is possible to check that the vehicle is locked. Note The vehicle is not automatically locked. Unlocking the tailgate Press button . The tailgate will unlock and open, whilst all other doors remain locked. Caution When all doors are locked, the load compartment can be unlocked by using the electronic key. Since then, if you close the tailgate with the electronic key left inside of the load compartment, the driver's door and the tailgate will be unlocked and a warning chime will sound. Keys, doors and windows 23 Central locking button Locks or unlocks all doors, the load compartment and fuel filler flap. Fault in radio remote control system or electronic key system Unlocking Press the button to unlock. Press the button to lock. When the key is in the ignition lock, locking is only possible if all doors are closed. Manually unlock the driver's door by turning the key in the lock. Switch on the ignition and press the central locking button to unlock all doors, load compartment and fuel filler flap. To deactivate the anti-theft locking system, switch on the ignition. Locking Switch on the ignition and press the central locking button to lock the doors, load compartment and fuel filler flap. Then close the driver's door and lock it from the outside with the key. Fault in central locking system Unlocking Manually unlock the driver's door by turning the key in the lock. The other doors can be opened by using the interior handle twice. The fuel filler flap cannot be opened. To deactivate the anti-theft locking system, switch on the ignition 25. Locking Push inside locking knob of all doors except driver's door. Then close the driver's door and lock it from the outside with the key. The fuel filler flap and tailgate cannot be locked. AUTOMATIC LOCKING* Automatic locking after driving off This security feature can be configured to automatically lock all doors, load compartment and fuel filler flap as soon as the vehicle starts to drive. Settings can be changed in the menu Settings in the Info-Display. Vehicle 24 Keys, doors and windows CHILD LOCKS personalisation 76. This locking will be unlocked automatically if any of following occur: n For automatic transmission, when the selector lever is in P after driving. n For manual transmission, when the key is removed from the ignition switch after driving. n With both electronic key and manual transmission, when the engine is stopped by pressing the Start/Stop button after driving. The settings can be stored by the key being used 19. Using a key or suitable screwdriver, turn the child locks in the rear doors into horizontal position. Doors cannot be opened from inside. For deactivation turn the child locks into vertical position. Warning Use the child locks whenever children are occupying the rear seats. Caution Do not unlock the door while driving. If a passenger opens the door by accident, it can result in serious injury or death in case of an unexpected accident. If the door is unlocked manually, lock it again using the door lock knob for safety. Caution Do not pull the inside door handle while the child security door lock is set to LOCK position. To do so can damage the inside door handle. Keys, doors and windows 25 DOORS VEHICLE SECURITY LOAD COMPARTMENT TAIL GATE Opening ANTI-THEFT ALARM SYSTEM Danger Do not drive with the tailgate open or ajar, e.g. when transporting bulky objects, since toxic exhaust gases, which can not be seen or smelled, could enter the vehicle. This can cause unconsciousness and even death. Anti theft alarm system monitors: n Doors, tailgate, bonnet n Ignition Activation Caution Press button on radio remote control until the tailgate is opened, or press the button under the tailgate moulding after unlocking. Before opening the tailgate check overhead obstructions, such as a garage door, to avoid damage of the tailgate. Always check the moving area above and behind the tailgate. Note The installation of certain heavy accessories onto the tailgate may affect its ability to remain open. Closing Do not press the button under the moulding while closing as this will unlock the tailgate again. Self-activated 30 seconds after locking the vehicle (initialisation of the system), or n Radio remote control: Directly by pressing once more after locking, or n 26 Keys, doors and windows n Electronic key system: Directly by pressing the switch on the door handle once more after locking. Status LED Status after system is armed: LED flashes = System is armed. slowly Seek the assistance of a CHEVROLET retailer in the event of faults. Deactivation 2x Status LED is integrated in the sensor on top of the instrument panel. Status during the first 30 seconds of anti-theft alarm system activation: LED = Test, arming delay. illuminates LED flashes = Doors, tailgate or quickly bonnet not completely closed, or system fault. Unlocking the vehicle by pressing button deactivates anti-theft alarm system. Keys, doors and windows 27 IMMOBILISER The system is integrated into the ignition switch and checks whether the vehicle is allowed to start with the key being used. If the transponder in the key is recognised, the vehicle can be started. The electronic immobiliser activates itself automatically after the key has been removed from the ignition switch or when the engine is switched off by pressing the Start/Stop button. Vehicle with electronic key system : Pressing the switch on the door handle deactivates anti-theft alarm system. Alarm The alarm can be silenced by pressing any button of the radio remote control or by switching on the ignition. The anti-theft alarm system can be deactivated only by pressing the button c or by pressing the switch on the door handle (only electronic key system) or switching on the ignition. If the control indicator flashes or illuminates when the ignition is on, there is a fault in the system; the engine cannot be started. Switch off the ignition and then repeat the start attempt. If the control indicator continues flashing or illuminating, attempt to start the engine using the spare key and seek the assistance of a CHEVROLET retailer. Note The immobiliser does not lock the doors. You should always lock the vehicle after leaving it and switch on the anti-theft alarm system 25. Control indicator 71. 28 Keys, doors and windows EXTERIOR MIRRORS CONVEX SHAPE FOLDING Electric folding* The convex exterior mirror reduces blind spots. The shape of the mirror makes objects appear smaller, which will affect the ability to estimate distances. ELECTRIC ADJUSTMENT For pedestrian safety, the exterior mirrors will swing out of their normal mounting position if they are struck with sufficient force. Reposition the mirror by applying slight pressure to the mirror housing. Select the relevant exterior mirror by turning the control to left (L) or right (R). In position 0 no mirror is selected. Then swivel the control to adjust the mirror. Turn control to 0, then push the control down. Both exterior mirrors will fold. Push the control down again - both exterior mirrors return to their original position. If an electrically retracted mirror is manually extended, pressing down the adjuster will only electrically extend the other mirror. Keys, doors and windows 29 INTERIOR MIRROR HEATED MIRRORS* MANUAL ANTI-DAZZLE Operated by pressing the button. Heating works with the engine running and is switched off automatically after a short time. To reduce dazzle, pull the lever on the underside of the mirror housing. Warning Always keep your mirrors properly adjusted, and use them while driving to increase your visibility of objects and other vehicles around you. Do not drive while either outside rearview mirror is folded back. 30 Keys, doors and windows POWER WINDOWS AUTOMATIC ANTI-DAZZLE* EXPRESS WINDOW OPERATION Warning Dazzle from following vehicles at night is automatically reduced. Take care when operating the power windows. Risk of injury, particularly to children. If there are children on the rear seat, switch on the child safety system for the power windows. Keep a close watch on the windows when closing them. Ensure that nothing becomes trapped in them as they move. Your vehicle may have windows with an express up or down feature. This feature allows the window to be lowered or raised without holding the switch. Driver side window have express up and down feature with safety function*, passenger side and rear windows only have express down. Pull a window switch up or push it down all the way, release it, and the window goes up or down automatically. Stop the window by pushing or pulling the switch. Power windows can be operated n With ignition on, n Within 10 minutes after switching ignition off. After switching off the ignition, window operation is disabled when the driver's or passenger's door is opened. Operate the switch for the respective window by pushing to open or pulling to close. Keys, doors and windows 31 Operation of front power window (Driver side) with safety function* Pushing or pulling lightly to the first detent: window moves down or up as long as switch is operated. Pushing or pulling stronger to the second detent and then releasing: window moves down or up automatically with safety function. To stop movement, operate the switch once more in the same direction. Operation of front and rear power windows without safety function Pushing or pulling lightly to the first detent: window moves down or up as long as switch is operated. Pushing stronger to the second detent and then releasing: window moves down automatically. To stop movement, operate the switch once more in the same direction. Safety function If the driver side window glass encounters resistance above the middle of the window during automatic closing, it is immediately stopped and opened again. Warning Body parts outside vehicle can be struck by passing objects. Keep all parts of body inside vehicle. Child safety system for rear windows Override safety function In the event of closing difficulties due to frost or the like, hold the switch pulled. The window moves up without safety function. To stop movement, release and operate the switch once more in the same direction. Press switch to deactivate rear door power windows, the LED lights up. To activate press again. 32 Keys, doors and windows Overload If the windows are repeatedly operated within short intervals, the window operation is disabled for some time. Initialising the power windows If the windows cannot be closed automatically (e.g. after disconnecting the vehicle battery), activate the window electronics as follows: 1. Close doors. 2. Switch on ignition. 3. Close the window completely and keep the switch pulled for additional 2 seconds. 4. Repeat for each window. HEATED REAR WINDOW SUNVISORS Operated by pressing the button. Heating works with the engine running and is switched off automatically after a short time. The sunvisors can be folded down or swiveled to the side to prevent dazzling. If the sunvisors have integral mirrors, the mirror covers should be closed when driving. Sunvisor with lighted vanity mirror* Pull the passenger side sunvisor down and lift the cover to access the mirror. A light comes on when the cover is lifted and goes off when it is closed. Caution Do not use sharp instruments or abrasive window cleaners on your vehicle’ s rear window. Do not scratch or damage the defroster wires when you clean or work around the rear window. Keys, doors and windows 33 SUNROOF* Warning Take care when operating the sun roof. Risk of injury, particularly to children. Keep a close watch on the movable parts when operating them. Ensure that nothing becomes trapped in them as they move. Sunroof can be operated ■ With ignition on, ■ Within 10 minutes after switching ignition off, After switching off the ignition, sun roof operation is disabled when driver's or passenger's door is opened. Operate the switches as follows: Open or close Press or gently to the first detent: sunroof is opened or closed as long as the switch is operated. Press or firmly to the second detent and then release: the sunroof is opened or closed automatically with enabled safety function. To stop movement, operate the switch once more. Raise or close Press or : sunroof is raised or closed automatically. To stop movement, operate the switch once more. Sunblind The sunblind is operated manually. Close or open the sunblind by sliding. When the sunroof is open, the sunblind is always open. Safety function If the sunroof encounters resistance during automatic closing, it is immediately stopped and opened again. Override safety function In the event of closing difficulties due to frost or the like, hold the switch pressed until the sunroof is closed. The sunroof closes without safety function. To stop movement, release the switch. Initialising after a power failure After a power failure, it may only be possible to operate the sunroof to limited extent. Have the system initialised by your CHEVROLET retailer. 34 Keys, doors and windows NOTE Seats, restraints 35 SEATS, RESTRAINTS HEAD RESTRAINTS POSITION Head restraints ............................... 35 Front seats ...................................... 36 Rear seats ....................................... 39 Seat belts ........................................ 40 Airbag system ................................ 43 Child restraints ............................... 46 Warning Only drive with the head restraint set to the proper position. Removed or improperly adjusted head restraints can result in serious head and neck injuries in case of a collision. Make sure that the head restraint readjusted before driving. The middle of the head restraint should be at eye level. If this is not possible for extremely tall persons, set to highest position, and set to lowest position for small people. HEAD RESTRAINTS ON FRONT SEATS Height adjustment Pull the head restraint upwards. To move down, press the catch and push the head restraint downwards. 36 Seats, restraints FRONT SEATS HEAD RESTRAINTS ON REAR SEATS Height adjustment SEAT POSITION Warning n Sit with your shoulders as far back Only drive with the seat correctly adjusted. n n Pull the head restraint upwards. To move down, press the catch and push the head restraint downwards. n Sit with your buttocks as far back against the backrest as possible. Adjust the distance between the seat and the pedals so that your legs are slightly angled when tromping the pedals. Slide the passenger seat as far back as possible. n n against the backrest as possible. Set the backrest rake so that you can easily reach the steering wheel with your arms slightly bent. Maintain contact between your shoulders and the backrest when turning the steering wheel. Do not angle the backrest too far back. We recommend a maximum rake of approx. 25 °. Adjust the steering wheel 57. Set seat height high enough to have a clear field of vision on all sides and of all display instruments. There should be at least one hand of clearance between your head and the headlining. Your thighs should rest lightly on the seat without pressing into it. Adjust the head restraint 35. Adjust the height of the seat belt 3 42. Seats, restraints 37 SEAT ADJUSTMENT (Manual) Danger Seat backrest Seat height* Pull lever, adjust inclination and release lever. Allow the seat to engage audibly. Do not lean on seat when adjusting. Lever pumping motion Up = Higher Down = Lower Do not sit nearer than 25 cm from the steering wheel, to permit safe airbag deployment. Warning Never adjust seats while driving as they could move uncontrollably. Seat positioning Pull handle, slide seat, release handle. 38 Seats, restraints SEAT ADJUSTMENT (Power)* Driver side Seat backrest Warning Care must be taken when operating the power seats. There is a risk of injury, particularly for children. Articles could become trapped. Never leave the remote control in the vehicle when leaving the vehicle! Risk of injury to unsupervised persons in event of power seat adjustment. Keep a close watch on the seats when adjusting them. Vehicle passengers should be informed accordingly. Seat positioning To move the seat forward or backward, move and hold the switch forward or backward. When the seat reaches the desired position, release the switch. Seat height To adjust the height of the entire seat cushion, move the switch upwards or downwards at rear. Seat inclination To adjust the inclination of the seat cushion, move the switch upwards or downwards at front. Pull lever, adjust inclination and release lever. Allow the seat to engage audibly. Do not lean on seat when adjusting. Overload If the seat setting is electrically overloaded, the power supply is automatically cut off for a short time. Seats, restraints 39 REAR SEATS ARMREST ARMREST Armrest between front seats Warning Push button and fold armrest upwards. The open armrest contains a stowage compartment. Horizontal adjustment Fold armrest down by pulling the strap. The folded armrest contains a drink holder. Push lever to slide the armrest. Use caution when using the drink holders. A spilled beverage that is very hot can injure you or your passenger. Spilled liquids can damage interior trim and electrical components. Do not place objects other than cups or cans in the drink holder. These objects can be thrown out in the event of a sudden stop or an accident, possibly injuring the passengers in the vehicle. 40 Seats, restraints SEAT BELTS BELT FORCE LIMITERS Seat belt reminder for driver's seat, seat belt control indicator 69. The belts are locked during heavy acceleration or deceleration of the vehicle for the safety of the occupants. Warning Fasten seat belt before each trip. In the event of an accident, persons not wearing seat belts endanger their fellow occupants and themselves. Seat belts are only designed for use by one person at a time. They are not suitable for persons younger than 12 years of age or smaller than 150 cm. Periodically check all parts of the belt system for damage and proper functionality. Have damaged components replaced. After an accident, have the belts and triggered belt tensioners replaced by a CHEVROLET retailer. Note Make sure that the belts are not damaged by shoes or sharp-edged objects. Prevent dirt from getting into the belt retractors. In the front seats, stress on the body is reduced by dampened release of the belt during a collision. BELT TENSIONERS In the event of a head-on or rear-end collision of a certain severity, the front seat belts are tightened. Seats, restraints 41 THREE-POINT SEAT BELT Fitting Warning Incorrect handling (e.g. removal or fitting of belts or belt buckles) can trigger the belt tensioners with risk of injury. Deployment of the belt tensioners is indicated by illumination of control indicator 69. Triggered belt tensioners must be replaced by a CHEVROLET retailer. Belt tensioners can only be triggered once. Note Do not affix or install accessories or other objects that may interfere with the operation of the belt tensioners. Do not make any modifications to belt tensioner components as this will invalidate the vehicle type approval. Withdraw belt from reel, guide it untwisted across the body and engage the latch plate in the buckle. Tension the lap belt regularly whilst driving by tugging the shoulder belt. Loose or bulky clothing prevents the belt from fitting snugly. Do not place objects such as handbags or mobile phones between the belt and your body. Warning The belt must not rest against hard or fragile objects in the pockets of your clothing. 42 Seats, restraints Height adjustment 1. Pull belt out slightly. 2. Press button. 3. Adjust height and engage. Removing Adjust the height so that the belt lies across the shoulder. It must not lie across the throat or upper arm. Do not adjust while driving. To release belt, press red button on belt buckle. Seat belts on the rear seats The three point seat belt for the rear centre seat can only be withdrawn from the retractor if the backrest is in the rear position. Seats, restraints 43 AIRBAG SYSTEM Using the seat belt while pregnant The airbag system consists of a number of individual systems. When triggered the airbags inflate within milliseconds. They also deflate so quickly that it is often unnoticeable during the collision. Warning The lap belt must be positioned as low as possible across the pelvis to prevent pressure on the abdomen. LAP BELT Lap belt on the rear center seat The seat belt for the rear center seat is constructed as a lap belt. For adjustment of length press on the upper side of the cover of the latch plate and tighten or loosen the belt. Warning If handled improperly the airbag systems can be triggered in an explosive manner. The driver should sit back as far as possible while still maintaining control of the vehicle. If you are sitting too close to the airbag, it can cause death or serious injury when it inflates. For maximum safety protection in all types of crashes, all occupants including the driver should always wear their seat belts to minimize the risk of severe injury or death in the event of a crash. Do not sit or lean unnecessarily close to the airbag while the vehicle is in motion. The air bag may cause facial or body scratch, injury by broken glasses or getting a burn by explosion while air bag is deployed. 44 Seats, restraints FRONT AIRBAG SYSTEM Note The airbag systems and belt tensioner control electronics are located in the centre console area. Do not put any magnetic objects in this area. Do not stick anything on the airbag covers and do not cover them with other materials. Each airbag is triggered only once. Have deployed airbags replaced by a CHEVROLET retailer. Do not make any modifications to the airbag system as this will invalidate the vehicle type approval. Having the steering wheel, the instrument panel, all panelling parts, the door seals, the handles and the seats removed by a CHEVROLET retailer. When an air bag deploys, there may be a loud noise and smoke. These conditions are normal and are not dangerous but in case it may stimulate skin of the passenger. If the stimulation is continued, contact a doctor. Warning Never allow children or infants and pregnant women and the old and the weak sit in the front passenger seats fitted with airbags. Furthermore, do not drive with a baby seat fitted thereon. In case of an accident, the impact from the inflated airbag can cause facial injury or death. The front airbag system consists of one airbag in the steering wheel and one in the instrument panel on the passenger side. These can be identified by the word AIRBAG. The front airbag system is triggered in the event of an accident of a certain severity. The ignition must be on. Caution If the vehicle is impacted by bumps or objects on unpaved roads or sidewalks, the air bag may inflate. Drive slowly on the surfaces not designed for vehicle traffic to prevent unintended air bag deployment. Control indicator 3 69. for airbag systems The forward movement of the front seat occupants is retarded, thereby considerably reducing the risk of injury to the upper body and head. Seats, restraints 45 SIDE AIRBAG SYSTEM* Warning Optimum protection is only provided when the seat is in the proper position 3 36. Keep the area in which the airbag inflates clear of obstructions. Wear the seat belt properly fastened. Only then the airbag is able to protect. The side airbag system consists of an airbag in each front seat backrest. This can be identified by the word AIRBAG. The side airbag system is triggered in the event of an accident of a certain severity. The ignition must be on. Note Only use protective seat covers that have been approved for your vehicle. Be careful not to cover the airbags. The risk of injury to the upper body and pelvis in the event of a side-on collision is considerably reduced. Warning Keep the area in which the airbag inflates clear of obstructions. Children who are seated in close proximity to a side airbag may be at risk of serious or fatal injury if the airbag deploys, especially if the child's head, neck or chest is close to the airbag at the time of deployment. Never let your child lean on the door or close to the side airbag module. 46 Seats, restraints CHILD RESTRAINTS* CHILD RESTRAINT SYSTEMS When a child restraint system is being used, pay attention to the following usage and installation instructions and also those supplied with the child restraint system. Warning Because of the airbag systems a child restraint system must not be mounted on the front passenger seat. If the vehicle is equipped with a lap belt on the rear centre seat, no child restraint system is allowed on this seat. It is advised to mount the child restraint system only on one of the rear outer seats of the second seat row. Selecting the right system The rear seats are the most convenient location to fasten a child restraint system. Your child should travel facing backwards in the vehicle, until as old as possible. It is appropriate to change the system when the child's head can no longer be properly supported at eye height. The child's cervical vertebrae are still very weak and in an accident they suffer less stress in the semi-prone rearward position than when sitting upright. Children under 12 years or under 150 cm tall should only travel in an appropriate child safety seat. Never carry a child whilst traveling in the vehicle. The child will become too heavy to hold in the event of a collision. When transporting children, use the child restraint systems suitable for the child's weight. Ensure that the child restraint system to be installed is compatible with the vehicle type. Ensure that the mounting location of the child restraint system within the vehicle is correct. Only allow children to enter and exit the vehicle at the side facing away from the traffic. When the child restraint system is not in use, secure the seat with a seat belt or remove it from the vehicle. Note Do not stick anything on the child restraint systems and do not cover them with any other materials. A child restraint system which has been subjected to stress in an accident must be replaced. Please ensure that infants and children are seated in the rear seats using child restraints. Until the children can use seat belts, please select a child restraint suitable for its age and make sure the child wears it. Please see the instructions on the relevant products for child restraints. Seats, restraints 47 CHILD RESTRAINT INSTALLATION LOCATIONS Permissible options for fitting a child restraint system Weight and age class On front passenger seat On rear outboard seats On rear centre seat Group 0: up to 10 kg or approx. 10 months X U1 U2 Group 0+: up to 13 kg or approx. 2 years X U1 U2 Group I: 9 to 18 kg or approx. 8 months to 4 years X U1 U2 Group II: 15 to 25 kg or approx. 3 to 7 years X U U2 Group III: 22 to 36 kg or approx. 6 to 12 years X U U2 1 = = U = X = 2 Seat available with ISOFIX and Top-Tether mounting brackets. Not allowed, if rear seat is equipped with a lap belt. Universal suitability in conjunction with three-point seat belt. No child restraint system permitted in this weight class. 48 Seats, restraints Permissible options for fitting an ISOFIX child restraint system Weight class Size class Fixture On front passenger seat On rear outboard seats On rear centre seat Group 0: up to 10 kg E ISO/R1 X IL1 X X IL1 X X Group 0+: up to 13 kg Group I: 9 to 18 kg IL E ISO/R1 D ISO/R2 X IL1 C ISO/R3 X IL1 X D ISO/R2 X IL1 X X C ISO/R3 X IL1 B ISO/F2 X IL, IUF X B1 ISO/F2X X IL, IUF X A ISO/F3 IL, IUF X X = Suitable for particular ISOFIX restraint systems of the 'specific-vehicle', 'restricted' or 'semi-universal' categories. The ISOFIX restraint system must be approved for the specific vehicle type. IUF = Suitable for ISOFIX forward-facing child restraint systems of universal category approved for use in this mass group. X = No ISOFIX child restraint system approved in this weight class. 1 = Move front seat to most forward position or move forward until child restraint system does not have any interference with front seat backrest. Seats, restraints 49 ISOFIX size class and seat device A – ISO/F3 B – ISO/F2 B1 – ISO/F2X C – ISO/R3 D – ISO/R2 E – ISO/R1 = = = = = = Forward-facing child restraint system for children of maximum size in the weight class 9 to 18 kg. Forward-facing child restraint system for smaller children in the weight class 9 to 18 kg. Forward-facing child restraint system for smaller children in the weight class 9 to 18 kg. Rear-facing child restraint system for children of maximum size in the weight class up to 13 kg. Rear-facing child restraint system for smaller children in the weight class up to 13 kg. Rear-facing child restraint system for young children in the weight class up to 13 kg. 50 Seats, restraints ISOFIX CHILD RESTRAINT SYSTEMS* TOP-TETHER CHILD RESTRAINT SYSTEMS* Top-tether fastening eyes are marked with the symbol on the load compartment cover. AIRBAG Warning Fasten vehicle-approved ISOFIX child restraint systems to the mounting brackets. ISOFIX child restraint systems can only be mounted in the rear seat row on the outer places. When using ISOFIX mounting brackets for seat mounting, universally approved child restraint systems for ISOFIX may be used. ISOFIX mounting brackets are indicated by a label on the backrest. NEVER use a rearward facing child restraint on a seat protected by an ACTIVE AIRBAG in front of it, DEATH or SERIOUS INJURY to the CHILD can occur. Open the flap of the required fastening eye, marked by the child seat symbol. In addition to the ISOFIX mounting fasten the Top-tether strap to the Toptether fastening eyes. The strap must run between the two guide rods of the head restraint. ISOFIX child restraint systems of universal category positions are marked in the table by IUF. Storage 51 STORAGE STORAGE COMPARTMENTS INSTRUMENT PANEL STORAGE Storage compartments .................... 51 Load compartment ......................... 53 Loading information ...................... 54 Storage on top of the instrument panel Storage below the light switch Pull the grip to fold up the cover. Pull the grip to open the box. Warning Do not store heavy or sharp objects in the storage compartments. Otherwise, the storage compartment lid could open and vehicle occupants could be injured by objects being thrown around in the event of sharp braking, a sudden change in direction or an accident. 52 Storage GLOVEBOX CUPHOLDERS Warning To open pull the grip. Do not place uncovered cups of hot liquid in the cup holder while the vehicle is in motion. If the hot liquid spills, you burn yourself. Such a burn to the driver could lead to loss of control of the vehicle. To reduce the risk of personal injury in the event of sudden stop or collision, do not place uncovered or unsecured bottles, glasses, cans, etc., in the cup holder while the vehicle is in motion. Cupholders are located in the centre console. Warning To reduce the risk of injury in an accident or a sudden stop, always keep the glovebox door closed while driving. Additional cupholders are located in the rear armrest, when it is folded down. Storage 53 LOAD COMPARTMENT SUNGLASS STORAGE* ARMREST STORAGE REAR SEAT – FIXED TYPE Storage in the front armrest The rear seat is of a single type and fixed. Fold down to open. Do not use for storing heavy objects. Push lever to slide and fold up the armrest. 54 Storage LOADING INFORMATION BAG HANGER n n n On the left side in the load compartment is a retainer for hanging carrier bags on. Caution Do not hang anything heavy onto the bag hanger. It could be damaged. Heavy objects in the load compartment should be placed against the seat backrest. Ensure the backrest are securely engaged. If objects can be stacked, the heavier objects should be placed at the bottom. n Secure objects in load compartment to prevent sliding. n Do not allow the load to protrude above the upper edge of the backrest. n Do not place any objects on the load compartment cover or the instrument n n panel, do not cover the sensor on top of the instrument panel. The load must not obstruct the operation of the pedals, parking brake and gear selector, or hinder the freedom of movement of the driver. Do not place any unsecured objects in the interior. Do not drive with an open load compartment. The payload is the difference between the permitted gross vehicle weight (see Identification plate 3 169) and the kerb weight. The kerb weight includes weights for the driver (68 kg), luggage (7 kg) and all fluids (tank 90 % full). Optional equipment and accessories increase the kerb weight. Driving with a roof load increases the sensitivity of the vehicle to cross-winds and has a detrimental effect on vehicle handling due to the vehicle’s higher centre of gravity. Storage 55 Distribute the load evenly and secure it properly with retaining straps. Adjust the tyre pressure and vehicle speed according to the load conditions. Check and retighten the straps frequently. Do not drive faster than 120 km/h. 56 Storage NOTE Instruments and controls 57 INSTRUMENTS AND CONTROLS Controls .......................................... 57 Windscreen wiper/washer .............. 58 Outside temperature ....................... 60 Clock .............................................. 61 Power outlets .................................. 61 Cigarette lighter ............................. 61 Ashtray ........................................... 62 Warning lights, gauges and indicators......................................... 63 Information displays ...................... 72 Vehicle messages ........................... 73 Trip computer ................................. 75 Vehicle personalisation .................. 76 CONTROLS STEERING WHEEL ADJUSTMENT* STEERING WHEEL CONTROLS* Unlock lever, adjust steering wheel, then engage lever and ensure it is fully locked. Do not adjust steering wheel unless vehicle is stationary. The Infotainment system can be operated by the controls on the steering wheel. See Infotainment system section for further information. Caution If strong impact delivers to steering column axle direction when the steering wheel is adjusted or the lever is locked, it may cause damage to the parts related to steering wheel. 58 Instruments and controls WINDSCREEN WIPER / WASHER HORN Press WINDSCREEN WIPERS . = = Off Timed interval wiping or automatic wiping with rain sensor* = Slow = Fast For a single wipe when the windscreen wipers are off, press the lever up. Do not use if the windscreen is frozen. Switch off in car washes. Adjustable wiper interval Wiper lever in position . Turn the adjuster wheel to adjust the desired wipe interval : Short = Turn adjuster wheel interval downwards Long = Turn adjuster wheel interval upwards Instruments and controls 59 Automatic wiping with rain sensor* = Automatic wiping with rain sensor The rain sensor detects the amount of water on the windscreen and automatically regulates the frequency of the windscreen wiper. Adjustable sensitivity of the rain sensor* Turn the adjuster wheel to adjust the sensitivity: Low = Turn adjuster wheel sensitivity upwards High = Turn adjuster wheel sensitivity downwards Caution Switch off the windscreen wiper and automatic operation with rain sensor in car washes. Keep the sensor free from dust, dirt and ice. If you move the wiper to rain sensor mode or turn the adjuster wheel from low sensitivity to high sensitivity when the ignition is switched on, the windscreen wipers operate once to check the system. 60 Instruments and controls OUTSIDE TEMPERATURE WINDSCREEN WASHER SYSTEM Caution Pull lever. Washer fluid is sprayed onto the windscreen and the wiper wipes for a few strokes. Less than clear vision for the driver can lead to an accident resulting in personal injury and damage to your vehicle or other property. Do not operate the windscreen wipers when the windscreen is dry or obstructed, as with snow or ice. Using the wipers on an obstructed windscreen can damage the wiper blades, wiper motor, and glass. Check blades are not frozen to windscreen before operating in cold weather. Wiper operation while blade is frozen can damage wiper motor. Do not operate the windscreen washer continuously for more than some seconds, or when the washer fluid tank is empty. This can cause the washer motor to overheat resulting in costly repairs. A drop in temperature is indicated immediately and a rise in temperature after a time delay. Warning The road surface may already be icy even though the display indicates a few degrees above 0 °C. Instruments and controls 61 CLOCK POWER OUTLETS* CIGARETTE LIGHTER 12V power outlets are located in the front and rear floor console. Do not exceed the maximum power consumption of 120 watts. With ignition off the power outlets are deactivated. Additionally the power outlets are deactivated in case of low battery voltage. The cigarette lighter is located in the front floor console. Press in cigarette lighter. Switches off automatically once the element is glowing. Pull out lighter. Date and time are shown in the InfoDisplay. Set date and time Switch on the Infotainment system. Press the Clock button. Time and Date Settings Set date: 18/04/2008 Set time 12/24 HR format: Set month & day format: DD/MM/YYYY Settings for time and date can be adjusted. Press the CONFIG button. The menu Settings is displayed. Select Time and Date Settings. Vehicle personalisation 76. Do not connect any current-delivering accessories, e.g. electrical charging devices or batteries. Do not damage the sockets by using unsuitable plugs. 62 Instruments and controls ASHTRAY Warning Caution If you leave the vehicle with an inflammable explosive substance, such as a disposable lighter, inside the car in summer, it can explode and cause fire due to an increase of temperature in the passenger compartment and the boot. Please ensure that no inflammable explosive substances are left or kept inside the car. The barrel of an operating cigarette lighter can become very hot. Do not touch the barrel of the cigarette lighter and do not allow children to operate or play with the cigarette lighter. This hot metal can cause personal injuries and damage to your vehicle or other property. Caution Caution Caution Overheating the cigarette lighter can damage the heating element and the lighter itself. Do not hold the lighter in while it is heating. This can cause the lighter to overheat. The cigarette socket should only be used with the cigarette lighter. To be used only for ash and not for combustible rubbish. If other 12V power adapters are installed into the cigarette socket, fuse failure or a potential thermal incident may occur. The 12V power outlet located at the rear of the console should be used when powering aftermarket devices such as navigation systems or phone chargers. Ashtray in the front console under the heating and ventilation controls or as container for mobile use in the car. Open cover to use. 64 Instruments and controls TACHOMETER FUEL GAUGE Note Before refuelling, make sure that the ignition is switched off. If you operate the ignition switch whilst refuelling, the needle of the fuel gauge may not indicate the proper fuel level. On inclines the needle on the fuel gauge may not indicate the proper fuel level due to movements of the fuel in the fuel tank. Displays the engine revolutions per minute. Drive in a low engine speed range for each gear as much as possible. Caution If the needle is in the warning zone, the maximum permitted engine speed is exceeded. Engine at risk. Displays the fuel level in the tank. Control indicator illuminates or flashes if the level in the tank is low. Refuel immediately. Never run the tank dry. Because of the fuel remaining in the tank, the top-up quantity may be less than the specified tank capacity. Instruments and controls 65 ENGINE COOLANT TEMPERATURE GAUGE Displays the coolant temperature. Left area (C) = Engine operating temperature not yet reached Central = Normal operating area temperature Right area (H) = Temperature too high Caution If engine coolant temperature is too high, stop vehicle, switch off engine. Danger to engine. Check coolant level. SERVICE DISPLAY Engine oil life system for diesel engines (not available on all versions or engines) When to change engine oil This vehicle may have a computer system that indicates when to change the engine oil and filter. This is based on engine revolutions and engine temperature, and not on mileage. Based on driving conditions, the mileage at which an oil change is indicated can vary considerably. For the oil life system to work properly, the system must be reset every time the oil is changed. When the system has calculated that oil life has been diminished, it indicates that an oil change is necessary. Code 82 appears in the Driver Information Center. Change the oil as soon as possible within the next 1000 kms. It is possible that, if driving under the best conditions, the oil life system might indicate that an oil change is not necessary for up to a year. The engine oil and filter must be changed at least once a year and, at this time, the system must be reset. Your CHEVROLET retailer has trained service people who can perform this work and reset the system. It is also important to check the oil regularly over the course of an oil drain interval and keep it at the proper level. If the system is ever reset accidentally, the oil must be changed at every 15000kms / 1year since the last oil change. Remember to reset the oil life system whenever the oil is changed. 66 Instruments and controls Display of remaining engine oil life % The remaining engine oil life duration is displayed in the Driver Information Center by the control indicator , followed by a percent value which shows the remaining engine oil life. For this purpose the ignition has to be switched on without engine running. Driver information Center 72. Service information 163. How to reset the engine oil life system Reset the system whenever the engine oil is changed so that the system can calculate the next engine oil change. To reset the engine oil life system, depending on model and country variant, do one of the following: n Using a scan tool: Your CHEVROLET retailer will reset the system using this tool after changing the engine oil. n Using accelerator pedal: ◆ Remove key from ignition switch or with Start/Stop system switch off ignition for more than one minute. ◆ Insert key in ignition switch and turn key to position 2 or with Start/Stop system switch on ignition (ignition on but with engine off). ◆ Fully press the accelerator pedal and hold for two seconds. ◆ Release the accelerator pedal for two seconds. ◆ Repeat pressing and releasing of the accelerator pedal as described above two times within one minute. n Using the SET/CLR button on vehicles with Midlevel-Display: Press the MENU button on the turn signal lever to select the Vehicle Information Menu. Turn the adjuster wheel until the menu with the remaining engine oil life duration is displayed. Press SET/ CLR button for a few seconds with ignition on. If Code 82 still appears in the Driver Information Center after the vehicle has been started, the engine oil life system has not been reset. Repeat the procedure. n Using the reset knob on vehicles with Baselevel-Display*: Instruments and controls 67 CONTROL INDICATORS The control indicators described are not present in all vehicles. The description applies to all instrument versions. When the ignition is switched on, most control indicators will illuminate briefly as a functionality test. The control indicator colours mean: Red Press reset knob for about 5 seconds until the remaining engine oil life is displayed. Release the reset knob and press again for a few seconds to reset the engine oil life system. Yellow Green Blue White = Danger, important = = = = reminder Warning, information, fault Confirmation of activation Confirmation of activation Confirmation of activation 68 Instruments and controls CONTROL INDICATORS IN THE INSTRUMENT Instruments and controls 69 TURN SIGNAL illuminates or flashes green. Flashes The control indicator flashes if a turn signal or the hazard warning flashers are activated. Fast flashing: Failure of a turn signal light or associated fuse. Bulb replacement 118. Fuses 124. Turn signals 80. SEAT BELT REMINDER for driver's seat illuminates or flashes red. Illuminates 4 seconds after ignition is switched on, 100 seconds after starting the engine or after reaching a specific distance respectively speed until the seat belt is fastened. Flashes For 100 seconds after starting the engine or reaching a specific distance respectively speed until the seat belt is fastened. Fastening the seat belt 40. AIRBAG AND BELT TENSIONERS illuminates red. When the ignition is switched on, the control indicator illuminates for about 4 seconds. If it does not illuminate, does not go out after 4 seconds or illuminates whilst driving, there is a fault in the belt tensioner or in the airbag system. The systems may fail to trigger in the event of an accident. Deployment of the belt tensioners or airbags is indicated by continuous illumination of . Warning Have the cause of the fault eliminated immediately by a CHEVROLET retailer. Airbag system, belt tensioners 40. 43, 3 CHARGING SYSTEM illuminates or flashes red. It illuminates when the ignition is switched on and goes out shortly after the engine starts. Illuminates when the engine is running Stop, switch off engine. Battery is not charging. Engine cooling may be interrupted. In diesel engines, power to the brake servo unit may be cut. Seek the assistance of a CHEVROLET retailer. Flashes* When key is held in position 3 for longer time, the control indicator flashes and vehicle enters battery saving mode. MALFUNCTION INDICATOR LIGHT illuminates or flashes yellow. It illuminates when the ignition is switched on and goes out shortly after the engine starts. 70 Instruments and controls SERVICE VEHICLE SOON illuminates yellow when the vehicle needs a service. It illuminates in combination with a warning code. Vehicle messages 73. BRAKE AND CLUTCH SYSTEM Brake and clutch fluid level illuminates red. Illuminates when the parking brake is released if the brake/clutch fluid level is too low or if there is a brake system fault 3 116. Warning If the brake system warning lamp illuminates, check the brake fluid level and contact a CHEVROLET retailer immediately. If the brake fluid level in the reservoir is low, do not drive the vehicle. This may mean your brakes are not working properly. Driving with malfunctioning brakes can cause personal injuries and damage to your vehicle and other property. Illuminates after the ignition is switched on if the manual parking brake is applied r 103. ANTILOCK BRAKE SYSTEM (ABS) illuminates yellow. Illuminates for a few seconds after the ignition is switched on. The system is ready for operation when the control indicator goes out. If the control indicator does not go out after a few seconds, or if it illuminates while driving, there is a fault in the ABS. The brake system remains operational but without ABS regulation. Antilock brake system 102. ULTRASONIC PARKING ASSIST* illuminates yellow. Fault in system or Fault due to sensors that are dirty or covered by ice or snow or Interference due to external sources of ultra sound. Once the source of interference is removed, the system will operate normally. Have the cause of the fault in the system remedied by a CHEVROLET retailer. Ultrasonic parking sensors 105. PREHEATING illuminates yellow. Illuminates when preheating is activated. Only activates when outside temperature is low. ENGINE OIL PRESSURE illuminates red. It illuminates when the ignition is switched on and goes out shortly after the engine starts. Instruments and controls 71 Illuminates when the engine is running Caution Engine lubrication may be interrupted. This may result in damage to the engine and/or locking of the drive wheels. 1. Manual transmission: Depress clutch. Select neutral gear. 2. Automatic transmission: Set selector lever to N. 3. Move out of the flow of traffic as quickly as possible without impeding other vehicles. 4. Switch off ignition. Warning When the engine is off, considerably more force is needed to brake and steer. Do not remove key until vehicle has come to a standstill, otherwise the steering column lock could engage unexpectedly. Check oil level before seeking assistance of a CHEVROLET retailer 113. LOW FUEL illuminates or flashes yellow. Illuminates or flashes when level in fuel tank is too low. Catalytic converter 98. Bleeding the diesel fuel system 117. IMMOBILISER flashes yellow. If the indicator continues illuminating or flashing when the ignition is on, there is a fault in the system. The engine cannot be started. OPERATE PEDAL flashes yellow. Flashes when brake or clutch pedal needs to be depressed to start vehicles with electronic key system 19. DOOR OPEN illuminates red. It illuminates when a door or the tailgate is open. EXTERIOR LIGHT illuminates green. Illuminated when the exterior lights are on 79. HIGH BEAM illuminates blue. Illuminated when high beam is on and during headlight flash 79,80. FOG LIGHT illuminates green. Illuminated when the front fog lamps are on 81. RAIN SENSOR* illuminates green. Illuminated when automatic rain sensor is activated 59. CRUISE CONTROL* illuminates white or green. Illuminates white The system is on. Illuminates green A certain speed is stored. Cruise control 103 72 Instruments and controls INFORMATION DISPLAYS DRIVER INFORMATION CENTER Press the SET/CLR button to select a function or to confirm a message. Vehicle personalisation 76. Trip computer 75. GRAPHIC-INFO-DISPLAY Depending on the Infotainment system, the Graphic-Info-Display is available in two versions. The Driver Information Center (DIC) is located in the instrument cluster and available as Baselevel - Display or Midlevel - Display. Selecting menus and functions The menus and functions can be selected by the buttons on the turn signal lever. Press the MENU button to switch between the menus or to return from a submenu to the next higher menu level. The MENU button will be locked when vehicle speed is above 0 km/h or the shift lever is NOT in position P. The following menus can be selected: n Vehicle Information Menu n Trip/Fuel Information Menu Turn the adjuster wheel to mark a menu option or to set a numeric value. Instruments and controls 73 VEHICLE MESSAGES The Graphic-Info-Display indicates: Time 61 n Outside temperature 60 n Date 61 n Electronic climate control settings 85 n Infotainment system, see description in the Infotainment system section 141 n Settings for vehicle personalisation 76 Selecting functions Functions and settings are accessed via the display. Selections are made via: n Menus n Function buttons and multifunction knob of the infotainment system n Selecting with the Infotainment system Push button CONFIG: Menu page Settings is displayed. Turn knob MENU to select a setting or value. Push knob MENU to confirm a setting or value. Push button BACK to exit a menu. Messages are given via the Driver Information Center (DIC), the InfoDisplay or as warning and signal buzzers. Confirm warning messages with the multifunction knob. The vehicle or engine may be seriously damaged if you keep driving while a vehicle message in the DIC is coming on. Contact a CHEVROLET retailer immediately. 74 Instruments and controls WARNING CHIMES The vehicle messages are displayed as code numbers. No. Vehicle message 2 5 7 9 25 26 27 28 35 54 65 67 75 79 No radio remote control detected, depress clutch pedal for a restart Steering column is locked Turn steering wheel, switch ignition off and then on Turn steering wheel, start engine again Left front turn indicator failure Left rear turn indicator failure Right front turn indicator failure Right rear turn indicator failure Replace battery in radio remote control Water in diesel fuel filter Theft attempt Service steering column lock Service air conditioner Top up engine oil 113 No. Vehicle message 81 82 84 91 92 94 95 134 136 Service transmission Change engine oil soon Engine power is reduced No remote detected, change location of the electronic key or use the socket located in the centre console No remote detected, press brake to restart Shift to park Service airbag Park assist fault, clean bumper Service parking assist When starting the engine or whilst driving n If seat belt is not fastened. n If a certain speed is exceeded with parking brake applied. n If a warning code appears in the Driver Information Center. n If the parking assist detects an object. When the vehicle is parked and/or a door is opened n Until the engine starts with the key in the ignition switch. n With exterior lights on. Instruments and controls 75 TRIP COMPUTER* The menus and functions can be selected by the buttons on the turn signal lever. Press the MENU button to select the Trip/Fuel Information Menu. Turn the adjuster wheel to select one of the submenus: n Trip odometer n Average consumption n Range n Average speed n Instantaneous consumption Trip odometer Trip odometer displays the recorded distance since a certain reset. To reset, press the reset knob or press the SET/CLR button for a few seconds. Average consumption Display of average consumption. The measurement can be reset at any time. To reset, press the SET/CLR button for a few seconds. Range Range is calculated from current fuel tank content and current consumption. The display shows average values. After refuelling, the range is updated automatically after a brief delay. When the fuel level in the tank is low, a message appears in the Driver Information Center. Additionally the control indicator in the fuel gauge illuminates or flashes. Average speed Display of average speed. The measurement can be reset at any time. To reset, press the SET/CLR button for a few seconds. Instantaneous consumption Display of the instantaneous consumption. At low speeds, consumption per hour is displayed. Caution The instantaneous and average consumption can vary according to the driving conditions, driving pattern or vehicle speed. 76 Instruments and controls VEHICLE PERSONALISATION* The vehicle's parameters can be personalised by changing the settings in the Driver Information Center and in the Info-Display. Press the MENU button to select the Vehicle Information Menu. Settings in the Info-Display The Unit settings menu is displayed. Displayed units can be changed. When audio is switched on, press the CONFIG button. The menu Settings is displayed. Depending on vehicle equipment some of the functions described below might not be available. Settings in the Driver Information Center The Unit settings can be selected by the buttons on the turn signal lever. Press the SET/CLR button and turn the adjuster wheel to select one of the units. n Unit1: Great Britain n Unit2: United States n Unit3: Europe Press the SET/CLR button to confirm. Instruments and controls 77 System Configuration Languages Time and Date Settings Radio Settings Vehicle Settings The following settings can be selected by the MENU button: n Languages n Time and Date Settings n Radio Settings n Vehicle Settings In the corresponding submenus the following settings can be changed: Languages Selection of the desired language. Time and Date Settings See Clock 61 and Infotainment system section for further information. Radio Settings See Infotainment system section for further information. Vehicle Settings Vehicle Settings Climate and Air Quality Comfort and Convenience Collision/Detection Systems Climate and Air Quality Auto fan speed: Modifies the fan speed high / medium / low. Auto rear defog: On/Off (activate or deactivate auto rear defog). n Comfort and Convenience Chime volume: Change the volume of warning chimes. n Collision/Detection Systems* Park assist: Activate or deactivate the ultrasonic sensors. n 78 Instruments and controls Lighting Exit lighting : Activate or deactivate and change the duration of exit lighting. n Power Door Locks Unlocked door anti lock out : On/Off (activate or deactivate the door knob to unlock automatically even when pressed manually with door open.) Auto door lock: Activate or deactivate the automatic door locking function. Auto door unlock: Change the configuration to unlock only the driver's door or all doors whilst unlocking. n Remote Lock, Unlock, Start Remote unlock light feedback : On/Off (activate or deactivate the hazard warning light feedback whilst unlocking with remote key.) Remote lock feedback: Activate or deactivate the hazard warning n light or horn or both feedback whilst locking. Remote door unlock : Change the configuration to unlock only the driver's door or all the doors whilst unlocking. Passive entry unlock*: Change the configuration to unlock only the driver’s door or all the doors while pressing the switch on the outer door handle. Remote left in vehicle reminder* : On/Off (activate or deactivate the reminder system (horn beep's) when the remote key is left in the vehicle.) n Return to Factory Settings: Yes/No (reset all the settings to factory default settings.) Lighting 79 LIGHTING EXTERIOR LIGHTING LIGHT SWITCH HIGH BEAM To turn the head, tail and parking lamps on or off, rotate the knob clockwise and counter clockwise. The knob has three positions which activate various lamp functions as follows : Turn light switch : = Lights off. = Position lights. = Headlights To switch from low to high beam, push lever. Exterior lighting ............................. 79 Interior lighting .............................. 82 Lighting features ............................ 83 Control Indicator 71. To switch to low beam, push lever again or pull. Warning Always switch the high beam headlamps to low beam when you approach oncoming vehicles or when other vehicles ahead. High beam headlamps can temporarily blind other drivers, which could result in a collision. 80 Lighting HEADLIGHT FLASH To activate the headlight flash, pull lever. HEADLIGHTS WHEN DRIVING ABROAD The asymmetrical headlight beam extends visibility at the edge of the road at the passenger side. However, when driving in countries where traffic drives on the opposite side of the road, adjust the headlights to prevent dazzling of oncoming traffic. Have the headlights adjusted by a CHEVROLET retailer. HAZARD WARNING FLASHERS TURN AND LANE-CHANGE SIGNALS Operated with the button. When the hazard warning flashers activate, the red surface on the button also flashes. The hazard warning flashers activate automatically if the airbags deploy. Lever up = Left indicator Lever down = Right indicator If the lever is moved past the resistance point, the indicator is switched on constantly. When the steering wheel moves back, the indicator is automatically deactivated. For three flashes, e.g. when changing lanes, press the lever until resistance is felt and then release. Move the lever to the resistance point and hold for longer indication. Switch the indicator off manually by moving the lever in its original position. Lighting 81 FRONT FOG LAMP HEADLAMP RANGE ADJUSTMENT 3 = Driver, plus an evenly distributed load in the boot, in order to obtain the permissible load on the corresponding axle. REVERSING LIGHTS The reversing lights come on when the ignition is on and reverse gear is selected. MISTED LIGHT COVERS Operated with the button. Adjust the headlight beam level with the following switch positions according to the number of passengers and load conditions: 0 = One person in the driver’s seat 0 = The driver, plus one passenger in the front seat farthest from the driver 1 = All the seats occupied 2 = All the seats occupied, plus an evenly distributed load in the luggage boot, in order to obtain the permissible load. The inside of the light housing may mist up briefly in poor, wet and cold weather conditions, in heavy rain or after washing. The mist disappears quickly by itself; to help switch on the headlights. 82 Lighting INTERIOR LIGHTING INSTRUMENT PANEL ILLUMINATION CONTROL INTERIOR LIGHTS Courtesy light READING LIGHTS Brightness of the following lights can be adjusted when the exterior lights are on: n Instrument panel illumination n Steering wheel controls n Info-Display n Climate control operation elements n Illuminated switches Turn knob and hold until the desired brightness is obtained. During entry and exit of the vehicle, the courtesy lights automatically switch on and then off after a delay. It switches on for a short time even if the key is withdrawn from the ignition lock. Operate rocker switch: = Automatic switching on and off Press = Always on Press = Always off Operated with and buttons. Warning Avoid using the interior lights while driving in the dark. A lit passenger compartment reduces visibility in the dark, and could cause a collision. SUNVISOR LIGHTS Illuminates when the cover is opened. Lighting 83 LIGHTING FEATURES ENTRY LIGHTING EXIT LIGHTING Welcome lighting* Sidelights and interior lights are switched on by unlocking the vehicle with the remote control for a short time. This function facilitates retrieving the vehicle when it is dark. The lighting switches off immediately when the ignition is turned to the accessory position. Activation or deactivation of this function can be changed in the menu Settings in the Info-Display. Vehicle personalisation 76. The settings can be stored by the key being used 19. Entrance lighting The following lights will additionally switch on when driver's door is opened: n Some switch lights n Some interior lights Headlights and tail lights illuminate the way for an adjustable time after leaving the vehicle. Switching on The following process is only applied to vehicles that do not have an automatic light function. The light switch has to be in position OFF. If the driver's door is closed, the lights will be switched off automatically after the set time. 1. Switch off ignition. 2. Remove ignition key. 3. Open driver's door. 4. Pull turn signal lever. 5. Close driver's door. If the driver's door is not closed the lights switch off after two minutes. The lighting is switched off immediately if the turn signal lever is pulled while the driver's door is open. Activation, deactivation and duration of lighting of this function can be changed in the menu Settings in the Info-Display. Vehicle personalisation 3 76. The settings can be stored by the key being used 19. 84 Lighting BATTERY DISCHARGE PROTECTION To prevent discharge of the battery when the ignition is switched off, some interior lights are switched off automatically after some time. If you turn off the ignition with the exterior lights on, they will automatically turn off after 10 minutes. Depending on the model and country variant, the exterior lights will turn off after 10 minutes or remain on continuously if you turn them on manually when the ignition is off. Climate control 85 CLIMATE CONTROL Climate control systems.................. 85 Air vents ......................................... 88 Maintenance ................................... 89 CLIMATE CONTROL SYSTEMS ELECTRONIC CLIMATE CONTROL SYSTEM Danger Do not sleep in a vehicle with the air conditioning or heating system on. It may cause serious harm or death due to a drop in the oxygen level and/or body temperature. Controls for automatic mode: AUTO = Automatic mode, all settings except temperature are choosen automatically by the system Temperature = Preselection of the desired temperature The following functions can be adapted manually, disabling automatic mode: Fan speed = Selectable air flow MODE = Selectable air distribution = Demisting and defrosting = Switching system on or off = Switching cooling on or off = Air recirculation Heated rear window 32. The preselected temperature is automatically regulated. In the automatic mode the fan speed and air distribution automatically regulate the air flow. The system can be manually adapted by use of air distribution and fan speed controls. 86 Climate control Automatic mode AUTO All air vents are actuated automatically in automatic mode. The air vents should therefore always be open. Temperature preselection Each change of settings is indicated in the Info-Display for a few seconds. Activated functions are indicated by the LED in the button. The electronic climate control system is only fully operational when the engine is running. Do not cover the sensor on the instrument panel for correct operation. Basic setting for maximum comfort: n Press AUTO button, the air condit- ioning is activated automatically. n Open all air vents. n Set pre-selected temperature using left rotary knob. The fan speed regulation in automatic mode can be changed in the menu Settings. Vehicle personalisation 76. Set temperature to the desired value by turning the knob. Red = Warm Blue = Cold If the minimum temperature is set, the climate control system runs at maximum cooling. Climate control 87 Fan speed If the maximum temperature is set, the climate control system runs at maximum heating. Demisting and defrosting the windows n Press button . n Temperature and air distribution are set automatically and the fan runs to higher speed. n To return to automatic mode: Press button or AUTO. Switch on heated rear window . Heated rear window 32. Manual settings Climate control system settings can be changed by activating the buttons and rotary knobs as follows. Changing a setting will deactivate the automatic mode. Air distribution MODE MODE Turn right rotary knob. The selected fan speed is indicated by the number in the display. To return to automatic mode: Press AUTO button. Press MODE button once or more for desired adjustment, the setting of air distribution is indicated on the InfoDisplay. = To windscreen, head area and foot well = To windscreen and foot well = To foot well = To head area via adjustable air vents = To head area via adjustable air vents and foot well To return to automatic air distribution : Press AUTO button. 88 Climate control AIR VENTS ADJUSTABLE AIR VENTS Cooling Activate or deactivate with the button. Warning n The air condition system cools and dehumidifies (dries) when outside temperature is above a specific level. Therefore condensation may form and drip from under the vehicle. If no cooling or drying is required, switch the cooling system off to save fuel. Manual air recirculation mode The manual air recirculation mode is operated with the button. When activated, external air inlet is blocked and internal air is in recirculation mode. The exchange of fresh air is reduced in air recirculation mode. In operation without cooling the air humidity increases, so the windows may mist up. The quality of the passenger compartment air deteriorates, which may cause the vehicle occupants to feel drowsy. At least one air vent must be open while cooling is on in order to prevent the evaporator from icing up due to lack of air movement. System switching on or off Pushing button switches all functions of heating, ventilation and cooling system on or off. Basic settings Some settings can be changed in the menu Settings in the Info-Display. Vehicle personalisation 76. To open vent, turn the adjuster wheel to right side. Climate control 89 MAINTENANCE AIR INTAKE Direct the flow of air by tilting and swiveling the slats. To close the vent, turn the adjuster wheel to left side . FIXED AIR VENTS Additional air vents are located beneath the windscreen and door windows and in the foot wells. The air intake in front of the windscreen in the engine compartment must be kept clear to allow air intake. Remove any leaves, dirt or snow. A/C MESH FILTER The filter prevents foreign materials from the air entering the vehicle through the air intake. 90 Climate control AIR CONDITIONING REGULAR OPERATION In order to ensure continuously efficient performance, cooling must be operated for a few minutes once a month, irrespective of the weather and time of year. Operation with cooling is not possible when outside temperature is low. SERVICE For optimal cooling performance, it is recommended to annually check the climate control system, starting three years after initial vehicle registration. n Functionality and pressure test n Heating functionality n Leakage check n Check of drive belts n Cleaning of condenser and evaporator drainage n Performance check Note Use only approved refrigerant. Warning Climate control systems have to be serviced exclusively by qualified personnel. Improper service methods may cause personal injury. Driving and operating 91 DRIVING AND OPERATING DRIVING HINTS Driving hints ................................... 91 Starting and operating .................... 92 Starting the engine ......................... 93 Engine exhaust ............................... 98 Automatic transmission ................. 98 Manual transmission .................... 101 Brakes .......................................... 102 Cruise control ............................... 103 Object detection systems .............. 105 Fuel .............................................. 106 Never coast with engine not running Many systems will not function in this situation (e.g. brake servo unit, power steering). Driving in this manner is a danger to yourself and others. Pedals To ensure the pedal travel is uninhibited, there must be no mats in the area of the pedals. Driving with diesel - engine vehicle The turbocharger elements rotate very fast. If the oil supply to running parts stops, the turbocharger system may be seriously damaged. The owner should be encouraged to observe the following precautions to ensure maximum turbocharger service life. CONTROL OF THE VEHICLE n After starting the engine, let it run for about 1 to 2 minutes with idle speed (avoid acceleration or driving off the vehicle). n Do not stop the engine immediately after coming back from the highload driving (such as high speed driving n n n n or driving down a long slope). Let the engine run for about 1 to 2 minutes at idle speed to cool it down. After changing the engine oil and oil filter, start the engine and let it run for about 1 to 2 minutes with idle speed (avoid acceleration or driving off the vehicle). Operate the engine above idle only after normal engine oil pressure has been established. Forcing the turbocharger to operate before the bearings are adequately lubricated creates unnecessary friction. Use only the specified engine oil and observe inspection and replacement intervals. At low ambient temperature, or when the vehicle has not been used for a long period, normal engine oil pressure and flow is affected. Under these conditions the engine should be started and allowed to idle for a few minutes before operating at higher rpm. 92 Driving and operating STARTING AND OPERATING DRIVING FOR BETTER FUEL ECONOMY NEW VEHICLE RUNNING - IN Driving habits can affect fuel mileage. Here are some driving tips to get the best fuel economy possible. n Avoid fast starts and accelerate smoothly. n Brake gradually and avoid abrupt stops. n Avoid idling the engine for long periods of time. n When road and weather conditions are appropriate, use cruise control. n Always follow posted speed limits or drive more slowly when conditions require. n Keep vehicle tires properly inflated. n Combine several trips into a single trip. n Replace the vehicle's tires with the same TPC Spec number molded into the tire's sidewall near the size. n Follow recommended scheduled maintenance. Use the following precautions for the first few hundred kilometres to improve the performance and economy of your vehicle and add to its long life: IGNITION SWITCH POSITIONS n Avoid full-throttle starts. n Do not race the engine. n Avoid hard stops except in emer- gencies. This will allow your brakes to bed in properly. n Avoid quick starts, sudden accelerations, and prolonged highspeed driving in order to avoid damage to the engine and to conserve fuel. n Avoid full-throttle acceleration in low gear. n Do not tow any other vehicle. 0 = Ignition off 1 = Ignition off, steering wheel lock released 2 = Ignition on, for diesel engine: preheating 3 = Starting Driving and operating 93 STARTING THE ENGINE Starting engine with the ignition switch n Turn key to position 3 and release Caution when engine is running Before restarting or to switch off the engine, turn key back to 0. Do not leave the key in the 1 or 2 position for extended periods while the engine is not running. This will discharge the battery. Do not turn the key to 0 position while driving. Driver could lose control of vehicle and brake power assistance would be cancelled, causing vehicle damage, personal injury or possibly death. n Turn key to position 1. Move the n n n n steering wheel slightly to release the steering wheel lock Manual transmission: Press and hold clutch pedal Automatic transmission: Press and hold brake pedal and move selector lever to P or N Do not accelerate Diesel engine: Turn the key to position 2 for preheating until control indicator goes out 94 Driving and operating Starting engine with the Start/Stop button* Warning Do not press the Start/Stop button while driving. A driver could lose control of vehicle and brake power assistance would be cancelled, causing an accident. Also never leave infants, children and juveniles unattended in the vehicle. It may cause an unexpected accident. n The electronic key must be inside Caution Pressing the Start/Stop button can start the engine when the electronic key is in the vehicle. Never leave children or any person who is unfamiliar with the vehicle alone. They could become involved in unexpected accidents. Switch the ignition off when you leave the vehicle and always carry the electronic key. the vehicle. n Manual transmission: Press and hold clutch pedal. n Automatic transmission: Press and hold brake pedal and move selector lever to P or N (for safety, start engine in P). n Do not accelerate while starting. n Press the Start/Stop button and release when the engine is running. The green LED will illuminate as soon as the engine is running. To switch off the engine, press the button again. Switching off the engine n Press Start/Stop button while engine is running and vehicle stationary to switch off the engine. n In case of emergency the engine can be switched off while the vehicle is running: press Start/Stop button twice. When the engine is not running, considerably more force is needed to brake and steer. Accessory power mode Press Start/Stop button once without pressing clutch or brake pedal: Accessory power mode is active, the yellow LED in the button illuminates. In this mode steering wheel lock is released and some electrical functions are operable. To start the engine from Accessory power mode, press clutch pedal (manual transmission) or brake pedal (auto- Driving and operating 95 matic transmission) and press Start/ Stop button once more. Ignition on power mode Press and hold Start/Stop button for 5 seconds without pressing clutch or brake pedal: Ignition on power mode is active, the green LED in the button illuminates. In this mode all electrical functions are operable and diesel engine is preheating. To start the engine from Ignition on power mode, press clutch pedal (manual transmission) or brake pedal (automatic transmission) and press Start/ Stop button once more. Do not leave accessory or ignition on mode for extended periods without engine starting. This will discharge the battery. Note Do not put the remote control in the luggage compartment or very close to the Info-Display. Starting the diesel engine in cold weather To start the diesel engine when the engine is cold, it has to be pre-heated before starting the engine and then has to be warmed up before starting to drive. Restarting in a short period of time or in warm weather, it is not needed to be preheated. 1. Press the Start/Stop button with applying brake or clutch pedal. 2. Keep applying brake or clutch pedal until the preheating indicator light turns off. 3. The engine will start automatically after turning off the preheating indicator light without pressing the button. Also the engine can start with pressing the Start/Stop button again when the preheating is being continued. But the engine may not start because the preheating is not completed. Let the engine warm up without applying the accelerator in extremely cold weather or after the vehicle has not been operated for several days. Whether the engine is cold or warm, it should be started without applying the accelerator pedal. Overrun cut-off The fuel supply is automatically cut off during overrun, i.e. when the vehicle is driven with a gear engaged but accelerator is released. Emergency operation If either the battery of the electronic key is weak or the radio remote control fails, the driver's door can be locked or unlocked with the mechanical key 17. The mechanical key can only lock or unlock the driver's door. Unlocking the entire vehicle 23. On vehicles with anti-theft alarm system, the alarm may be triggered when the vehicle is unlocked. Deactivate the alarm by switching on the ignition. 96 Driving and operating Open the cover in the bottom of the cupholder in the centre console. Fold out the key bit of the electronic key and insert it into the keyway. Press the Start/Stop button. To switch off the engine, press the Start/Stop button for at least 2 seconds. Lock the driver's door with the mechanical key. Locking the entire vehicle 23. This option is intended for emergencies only. Seek the assistance of a CHEVROLET retailer. The function (ignition on, lock/unlock door) of the electronic key may not work or the operating distance may change because the frequency is mixed with close others if any of following occurs. In this case, open and close the door using the key manually. If the electronic key does not work when it is in the vehicle or you possess it, you can start the engine by using emergency operation. If the engine is not running when you use the key manually, contact a CHEVROLET retailer. n When the electronic key is close to a radio transmitter such as a radio station, an airport, a police station, a government office, a base, a transmitting tower, or a port. n When you keep the electronic key near a mobile two-way radio system or a cellular phone. n When another vehicle’s electronic key is being operated close to your vehicle. n When the electronic key is discharged. The interior mobile two-way radio system can disturb the electrical system of the vehicle. Use the exterior mobile two-way radio system. You must always comply with the specific laws and regulations of the country that you are in. Disabled electronic key If you lock the door using a electronic key outside the vehicle when another electronic key is inside the vehicle, the inside key will be disabled. It can not make the engine to start. The disabled electronic key can be reactivated when you press the button of the disabled key. Caution If the electronic key is very close to vehicle body like doors, windscreen, rear window, anyone inside the vehicle may start the engine by pressing Stop/Start button. Be careful not to do this. Driving and operating 97 Electronic key reminder chime The horn will sound three times continuously to indicate that the electronic key is inside the vehicle when you leave the vehicle and close the door. The setting of this function can be changed in the Info-Display. When the electronic key is very close to doors or window, the vehicle might recognize that the electronic key is inside the vehicle and the horn might sound. Restart without electronic key When the electronic key is not inside the vehicle while the engine is running, the ignition mode will change to ACC (LED: yellow) if you press the Start/Stop button to stop the engine. (After 5 minutes without any input, the ignition will be switched off automatically.) You can restart the engine applying brake pedal (automatic transmission) or clutch pedal (manual transmission) and pressing the Start/Stop button. This process can be repeated continuously. If you press the Start/Stop button without applying brake or clutch pedal or it passes several seconds in ACC mode, the engine will be OFF (LED: off). And restarting is not possible. The electronic key will not work if any of following occurs n When the vehicle is in the electromagnetic field of high frequency. n When an electric equipment using same frequency with the electronic key is being worked. n When the battery of the electronic key is discharged or has a problem. Parking n Do not park the vehicle on an easily ignitable surface. The high temperature of the exhaust system could ignite the surface. n Always apply parking brake without pressing release button. Apply as firmly as possible on downhill or uphill slopes. Depress the footbrake at the same time to reduce operating force. n Switch off the engine and ignition. Turn the steering wheel until the steering wheel lock engages. n If the vehicle is on a level surface or uphill slope, engage first gear or set the selector lever to P before switching off the ignition. On an uphill slope, turn the front wheels away from the kerb. If the vehicle is on a downhill slope, engage reverse gear or set the selector lever to P before switching off the ignition. Turn the front wheels towards the kerb. n Lock the vehicle and activate the anti-theft alarm system. 98 Driving and operating AUTOMATIC TRANSMISSION ENGINE EXHAUST CATALYTIC CONVERTER Danger Engine exhaust gases contain poisonous carbon monoxide, which is colourless and odourless and could be fatal if inhaled. If exhaust gases enter the interior of the vehicle, open the windows. Have the cause of the fault rectified by a CHEVROLET retailer. Avoid driving with an open load compartment, otherwise exhaust gases could enter the vehicle. The catalytic converter reduces the amount of harmful substances in the exhaust gas. Caution The automatic transmission permits manual gear shifting (manual mode) or automatic gear shifting (automatic mode). TRANSMISSION DISPLAY Fuel grades other than those listed on page 106 could damage the catalytic converter or electronic components. Unburnt fuel will overheat and damage the catalytic converter. Therefore avoid excessive use of the starter, running the fuel tank dry and starting the engine by pushing or towing. In the event of misfiring, uneven engine running, a reduction in engine performance or other unusual problems, have the cause of the fault rectified by a CHEVROLET retailer as soon as possible. In an emergency, driving can be continued for a short period, keeping vehicle speed and engine speed low. The mode or selected gear is shown in the transmission display. Driving and operating 99 MANUAL MODE SELECTOR LEVER To engage P or R, push the release button. + _M R N D P To start the engine, press the brake pedal in either P or N position. Do not accelerate while engaging a gear. Never depress the accelerator pedal and brake pedal at the same time. When a gear is engaged, the vehicle slowly begins to creep when the brake is released. P = Park position, wheels are locked, engage only when the vehicle is stationary and the parking brake is applied R = Reverse gear, engage only when vehicle is stationary N = Neutral D = Automatic mode with all gears The selector lever is locked in P. To move, switch on ignition, apply brake pedal and push release button. Engine braking To utilise the engine braking effect, select a lower gear in good time when driving downhill. Rocking the vehicle Rocking the vehicle is only permissible if the vehicle is stuck in sand, mud or snow. Move the selector lever between D and R in a repeat pattern. Do not race the engine and avoid sudden acceleration. Parking Apply the parking brake, engage P and remove ignition key. Move selector lever out of position D towards the left and then forwards or backwards. = Shift to a higher gear. = Shift to a lower gear. If a higher gear is selected when vehicle speed is too low, or a lower gear when vehicle speed is too high, the shift is not executed. If engine speed is too low, the transmission automatically shifts to a lower gear above a specific vehicle speed. 100 Driving and operating Kickdown No automatic shifting to a higher gear takes place at high engine revolutions. When shift change in automatic transmission, it could not be smooth. But, it is not a problem with automatic transmission. If Transmission control module (TCM) shift pattern learn is done by shift up/down several times, it would lead smooth shift change. ELECTRONIC DRIVING PROGRAMMES n Following a cold start, the operating temperature programme increases engine speed to quickly bring the catalytic converter to the required temperature. n The automatic neutral shift function automatically shifts to idling when the vehicle is stopped with a forward gear engaged. For faster acceleration press and hold the accelerator pedal all the way down. The transmission then shifts to a lower gear depending on engine speed. FAULT In the event of a fault, malfunction indicator light illuminates. The transmission no longer shifts automatically nor manually because it is locked in a certain gear. Have the cause of the fault remedied by a CHEVROLET retailer. INTERRUPTION OF POWER SUPPLY In the event of an interruption of power supply, the selector lever cannot be moved out of the P position. The ignition key cannot be moved out of the ignition lock. If the battery is discharged, start the vehicle using jump leads 134. If the battery is not the cause of the fault, release selector lever and remove ignition key from ignition lock. Release selector lever 1. Apply parking brake. Driving and operating 101 MANUAL TRANSMISSION 2. Open cover to the right of the selector lever. Footrest/Deadpedal This is an additional feature for driver’s comfort, driver can rest his left foot on the footrest, if the clutch not in use while driving. The footrest is ergonomically designed to give maximum comfort to the drivers foot. Caution It is inadvisable to drive with hand resting on the selector lever. 3. Insert a screwdriver into the opening as far as it will go and move the selector lever out of P. If P is engaged again, the selector lever will be locked in position again. Have the cause of the power supply interruption remedied by a CHEVROLET retailer. 4. Close cover. To engage reverse, with the vehicle stationary pull up the ring on the selector lever and engage the gear. If the gear does not engage, set the lever in neutral, release the clutch pedal and depress again; then repeat gear selection. Do not grind the clutch unnecessarily. When operating, depress the clutch pedal completely. Do not use the pedal as a foot rest. 102 Driving and operating BRAKES ANTILOCK BRAKE SYSTEM Fault The brake system comprises two independent brake circuits. If a brake circuit fails, the vehicle can still be braked using the other brake circuit. However, braking effect is achieved only when the brake pedal is depressed firmly. Considerably more force is needed for this. The braking distance is extended. Seek the assistance of a CHEVROLET retailer before continuing your journey. When the engine is not running, the support of the brake servo unit disappears once the brake pedal has been depressed once or twice. Braking effect is not reduced, but braking requires significantly greater force. It is especially important to bear this in mind when being towed. Control indicator 70. Antilock brake system (ABS) prevents the wheels from locking. ABS starts to regulate brake pressure as soon as a wheel shows a tendency to lock. The vehicle remains steerable, even during hard braking. ABS control is made apparent through a pulse in the brake pedal and the noise of the regulation process. For optimum braking, keep the brake pedal fully depressed throughout the braking process, despite the fact that the pedal is pulsating. Do not reduce the pressure on the pedal. Control indicator 70. Warning If there is a fault in the ABS, the wheels may be liable to lock due to braking that is heavier than normal. The advantages of ABS are no longer available. During hard braking, the vehicle can no longer be steered and may swerve. Have the cause of the fault remedied by a CHEVROLET retailer. Driving and operating 103 CRUISE CONTROL* PARKING BRAKE Warning If the parking brake is not set properly, the vehicle may move suddenly. See a CHEVROLET retailer if an adjustment is required. The cruise control can store and maintain speeds of approx. 40 to 200 km/h. Deviations from the stored speeds may occur when driving uphill or downhill. For safety reasons the cruise control cannot be activated until the foot brake has been operated once. Caution Always apply parking brake firmly without operating the release button, and apply as firmly as possible on a downhill or uphill slope. To release the parking brake, pull the lever up slightly, press the release button and fully lower the lever. To reduce the operating forces of the parking brake, depress the foot brake at the same time. Control indicator 70. Do not drive with the parking brake on. This can cause your rear parking brakes to overheat or wear out prematurely. You may have to replace them, and you could damage other parts of your vehicle. Caution Do not park or operate your vehicle over combustible materials. They could touch hot exhaust parts under your vehicle and ignite. Do not use the cruise control if it is not advisable to maintain a constant speed. With automatic transmission, only activate cruise control in automatic mode. 104 Driving and operating Control indicator 71. Switching on Press rocker switch at the upper end, control indicator illuminates white. Activation Accelerate to the desired speed and turn thumb wheel to SET/-, the current speed is stored and maintained. Control indicator illuminates green. Accelerator pedal can be released. Vehicle speed can be increased by depressing the accelerator pedal. When the accelerator pedal is released, the previously stored speed is resumed. Increase speed With cruise control active, hold thumb wheel turned to RES/+ or briefly turn to RES/+ repeatedly: speed increases continuously or in small increments. Alternatively accelerate to the desired speed and store by turning to RES/+. Reduce speed With cruise control active, hold thumb wheel turned to SET/- or briefly turn to SET/- repeatedly: speed decreases continuously or in small increments. Deactivation Press button , control indicator illuminates white. Cruise control is deactivated. The stored speed is memorised. Automatic deactivation: n Vehicle speed below approx. 40 km/h, n The brake pedal is depressed, n The clutch pedal is depressed for more than a few seconds, n Selector lever in N, n Engine speed in a very low range. Resume stored speed Turn thumb wheel to RES/+ at a speed above 40 km/h. The stored speed will be obtained. If the difference between the current and the stored speed is more than 40 km/h, the vehicle cannot resume the stored speed. Switching off Press rocker switch at the lower end, control indicator extinguishes. The stored speed is deleted. Switching off the ignition also deletes the stored speed. Driving and operating 105 OBJECT DETECTION SYSTEMS PARKING ASSIST* The parking assist makes parking easier by measuring the distance between the vehicle and rear obstacles, and giving acoustic signals. It is the driver, however, who bears full responsibility for parking manoeuvre. The system consists of four ultrasonic parking sensors in the rear bumper. Control indicator 70. Note Attached parts in the detection area cause system malfunction. Activation When reverse gear is engaged, the system is activated automatically. An obstacle is indicated by acoustic warnings. The interval between the warnings becomes shorter as the vehicle gets closer to the obstacle. When the distance is less than 40 cm, the acoustic warning sounds continuous. Deactivation The system is deactivated automatically when ■ the vehicle is driven above 10 km/h ■ the vehicle is parked ■ a fault in the system occurs. Fault In the event of a fault in the system, r illuminates. Additionally if the system does not work due to temporary conditions like snow covered sensors, illuminates. Important hints for using the parking assist systems Warning Under certain circumstances, various reflective surfaces on objects or clothing as well as external noise sources may cause the system to fail to detect obstacles. Note Sensor could detect a nonexisting object (echo disturbance) caused by external acoustical or mechanic disturbances. 106 Driving and operating FUEL FUEL FOR DIESEL ENGINES Caution Caution Sensitivity of the sensor could be reduced caused by external influences e.g. layers on the sensor surface (ice, snow, mud, soiling, multiple varnishing/painting, etc.). Sensor could detect a non-existing object ("echodisturbance") caused by external acoustical disturbances e.g. another park pilot system. Sensor could detect a non-existing object ("echodisturbance") caused by external mechanic disturbances e.g. carwash, rain, extreme wind conditions, hail etc. Performance of the park assistance systems could be reduced caused by changing of sensor position by external changes to the vehicle, e.g. lowering of the shock absorber over lifetime due to: temperature changes, changing of tyres, loading of the vehicle, lowering/tuning of the vehicle etc. Object identification in the upper part of the vehicle can not be guaranteed. Performance of the park assistance systems could be reduced by acoustic coupling to the vehicle caused by icing over. Objects with a very small reflection cross section may not be detected. Only use diesel fuel that complies with EN 590. The fuel must have low sulphur content (max. 50 ppm). Do not use marine diesel oils, heating oils or entirely or partially plant-based diesel fuels, such as rape seed oil or bio diesel, Aquazole and similar dieselwater emulsions. Diesel fuels must not be diluted with fuels for petrol engines. The flow and filterability of diesel fuel are temperature-dependent. When temperatures are low, refuel with diesel fuel with guaranteed winter properties. Caution Use of fuel that does not comply to EN 590 or similar can lead to engine powerloss, increased wear or engine damage and may affect your warranty. Driving and operating 107 REFUELING Caution Danger If you use inappropriate grade fuel or put incorrect fuel additives into the fuel tank, the engine and catalytic converter may seriously be damaged. Be sure to use the correct fuel (petrol or diesel) corresponding to your vehicle when refueling. If you fill petrol in your diesel powered vehicle, your vehicle can be seriously damaged. If your vehicle has diesel engine, you can confirm the correct fuel by taking a look at information on the fuel filler cap. For safety reasons, fuel containers, pumps and hoses must be properly earthed. Static electricity build up can ignite the fuel vapor. You can be burnt and your vehicle damaged. Fuel is flammable and explosive. No smoking. No naked flames or sparks. If you can smell fuel in your vehicle, have the cause of this remedied immediately by a CHEVROLET retailer. Fuel filler flap is located at right rear side of vehicle. Danger Before refuelling, switch off engine and any external heaters with combustion chambers. Switch off any mobile phones. Follow the operating and safety instructions of the filling station when refuelling. The fuel filler flap can only be opened if the vehicle is unlocked. Release the fuel filler flap by pushing the flap. 108 Driving and operating FUEL FILLER CAP Caution Caution In case of misfuelling, do not switch on ignition. Wipe off any overflowing fuel immediately. Only a genuine fuel filler cap provides full functionality. Diesel-engined vehicles have special fuel filler caps. Caution To close, turn the fuel filler cap to the right until it clicks. Close the flap and let engage. To open, turn the fuel filler cap slowly to the left. The fuel filler cap can be retained in the bracket on the fuel filler flap. For refuelling, fully insert the pump nozzle and switch it on. After automatic cut-off, it can be topped up with max. two doses of fuel. If you use a car wash when the vehicle is unlocked, the fuel filler flap might be open and it can be damaged in the car wash. Make sure to lock the fuel filler flap by using the central locking button. Do not close the fuel filler flap when the vehicle is locked. Vehicle care 109 VEHICLE CARE General information ..................... 109 Vehicle checks .............................. 110 Engine compartment overview .... 112 Wiper blade replacement .............. 117 Bulb replacement .......................... 118 Electrical system .......................... 124 Vehicle tools ................................. 128 Wheels and tyres .......................... 129 Jump starting ................................ 134 Towing ......................................... 135 Appearance care ........................... 138 GENERAL INFORMATION ACCESSORIES AND VEHICLE MODIFICATIONS We recommend to use Genuine Parts and Accessories and factory approved parts specific for your vehicle type. We cannot assess or guarantee for other products - even if they have a regulatory or otherwise granted approval. Do not make any modifications to the electrical system, e.g. changes of electronic control units (chip tuning). Caution Never modify your vehicle. It may affect the performance, durability and safety of the vehicle and the warrant may not cover any problems caused by the modification. VEHICLE STORAGE Storage for a long period of time If the vehicle is to be stored for several months: n Wash and wax the vehicle. n Have the wax in the engine com- partment and underbody checked. n Clean and preserve rubber seals. n Change engine oil. n Drain washer fluid reservoir. n Check coolant anti-freeze and corn n n n rosion protection. Adjust tyre pressure to the value specified 172. Park vehicle in dry, well ventilated place. Engage first or reverse gear or set selector lever to P. Prevent the vehicle from rolling. Do not apply parking brake. Open bonnet, close all doors and lock the vehicle. 110 Vehicle care RADIO FREQUENCY IDENTIFICATION (RFID) TAG * n Disconnect the clamp from the nega- tive terminal of the vehicle battery. Beware that all systems are not functional, e.g. anti-theft alarm system. Putting back into operation When the vehicle is to be put back into operation: n Connect the clamp to the negative terminal of the vehicle battery. Activate the electronic of the power windows. n Check tyre pressure. n Fill up the washer fluid reservoir. n Check the engine oil level. n Check the coolant level. n Fit the number plate if necessary. This vehicle is equipped with Radio Frequency Identification (RFID) tag*, which can be used for Electronic Toll Collection (ETC) or any other applications as decided by the Regulatory authority. The RFID tag is located on inside the windshield. Data for necessary applications will be added by the agency authorized by the Regulatory authority, from time to time. Take proper care during washing or cleaning of windshield so as to avoid any damage to the RFID tag. In case of any damage or malfunction of RFID tag, or in case of windshield replacement, contact your CHEVROLET retailer or agency authorized by the Regulatory authority for the installation of new RFID tag. Caution Do not touch or peel off. Do not place any sticker or other metallic components over the RFID tag neither from inside nor from outside of the windshield. Avoid exposure to chemicals or liquid solvents. This will impair the function of RFID tag. The RFID tag is tamperproof and will not function once removed from windshield. VEHICLE CHECKS PERFORMING WORK Warning Only perform engine compartment checks when the ignition is off. The cooling fan may start operating even if the ignition is off. Vehicle care 111 BONNET Opening Secure the bonnet support. Closing Before closing the bonnet, press the support into the holder. Lower the bonnet and allow it to drop into the catch. Check that the bonnet is engaged. Warning Pull the release lever and return it to its original position. Warning Only touch the foam padding of the bonnet support rod handle when the engine is hot. Push the safety catch to the right and open the bonnet. Air intake 89. Always observe the following precautions: Pull on the front edge of the bonnet to make sure it is latched securely before you drive your vehicle. Do not pull the bonnet release handle while your vehicle is moving. Do not move your vehicle with the bonnet open. An open bonnet will obscure the driver's vision. Operating your vehicle with the bonnet open can lead to a collision resulting in damage to your vehicle to other property, personal injury or even death. 112 Vehicle care ENGINE COMPARTMENT OVERVIEW Diesel Engine, Z20D1 (LNP) Vehicle care 113 1. 2. 3. 4. 5. 6. 7. 8. 9. Power steering fluid container 115 Engine oil cap 113 Brake fluid container 116 Engine coolant container 114 Fuse box 125 Washer fluid container 116 Battery 117 Dipstick for engine oil level 113 Engine air filter 114 ENGINE OIL Check the engine oil level on a regular basis to prevent damage to the engine. Ensure that the correct specification of oil is used. Recommended fluids and lubricants 167 It is advisable to check the engine oil level manually before embarking on a long journey. Check with the vehicle on a level surface. The engine must be at operating temperature and switched off for at least 10 minutes. Pull out the dipstick, wipe it clean, insert it to the stop on the handle, pull out and read the engine oil level. Insert dipstick to the stop on the handle and make half a turn. MIN MAX We recommend the use of the same grade of engine oil that was used at last change. The engine oil level must not exceed the MAX mark on the dipstick. Different dipsticks are used depending on engine variant. Caution When the engine oil level has dropped to the MIN mark, top up engine oil. Overfilled engine oil must be drained or suctioned out. Capacities 172. Fit the cap on straight and tighten it. 114 Vehicle care ENGINE AIR FILTER Take care of sufficient anti-freeze concentration Warning Engine oil is an irritant and, if ingested, can cause illness or death. Keep out of reach of children. Avoid repeated or prolonged contact with skin. Wash exposed areas with soap and water or hand cleaner. Be very careful when draining the engine oil as it may be hot enough to burn you! ENGINE COOLANT Caution Only use approved anti-freeze. Coolant level Caution Too low a coolant level can cause engine damage. To replace engine air filter unscrew 6 screws and remove filter housing. Caution When driving at a slope, the warning Code 79 might be displayed in the Driver Information Centre 72. If the code disappears when driving in a flat area again, do not top up engine oil. If the cooling system is cold, the coolant level should be above the filling line Vehicle care 115 POWER STEERING FLUID mark. Top up if the level is low. Caution Extremely small amounts of contamination can cause steering system damage and cause it to not work properly. Do not allow contaminates to contact the fluid side of the reservoir cap/dipstick or from entering the reservoir. Warning Allow the engine to cool before opening the cap. Carefully open the cap, relieving the pressure slowly. Top up with the recommended coolant approved for the vehicle. Install the cap tightly. Have the antifreeze concentration checked and have the cause of the coolant loss remedied by a CHEVROLET retailer. Open the cap and remove. Wipe the dipstick dry and turn the cap in the container. Open the cap again and read the power steering fluid level. The power steering fluid level must be between the MIN and the MAX marks. If the fluid level is to low, seek the assistance of a CHEVROLET retailer. 116 Vehicle care WASHER FLUID below freezing, use windshield washer fluid which has sufficient anti-freezing property. BRAKE FLUID Only use high-performance brake fluid approved for the vehicle. Recommended fluids and lubricants 167. Warning Brake fluid is poisonous and corrosive. Avoid contact with eyes, skin, fabrics and painted surfaces. Warning Fill with clean water mixed with a suitable quantity of windscreen wash solution which contains antifreeze. To refill windshield washer fluid reservoir: n Use only commercially available ready-to-use washer fluid for that purpose. n Do not use tap water. Minerals present in tap water may plug the windshield washer lines. n If air temperature is likely to go The brake fluid level must be between the MIN and the MAX marks. When topping up, ensure maximum cleanliness as contamination of the brake fluid can lead to brake system malfunctions. Have the cause of the loss of brake fluid remedied by a CHEVROLET retailer. If too much brake fluid is added, it can spill on the engine and burn, if the engine is hot enough. You or others could be burned, and the vehicle could be damaged. Add brake fluid only when work is done on the brake hydraulic system. Vehicle care 117 BATTERY The vehicle battery is maintenance free. Batteries do not belong in household waste. They must be disposed of at an appropriate recycling collection point. Laying up the vehicle for more than 4 weeks can lead to battery discharge. Disconnect the clamp from the negative terminal of the vehicle battery. Ensure the ignition is switched off before connecting or disconnecting the vehicle battery. Meaning of symbols: No sparks, naked flames or smoking. n Always shield eyes. Explosive gases can cause blindness or injury. n Keep the vehicle battery out of reach of children. n The vehicle battery contains sulfuric acid which could cause blindness or serious burn injuries. n Warning Keep glowing materials away from the battery to avoid explosion. Battery explosion can result in damage to the vehicle and serious injury or death. Avoid contact with eyes, skin, fabrics and painted surfaces. The fluid contains sulphuric acid which can cause injuries and damage in the event of direct contact. In case of skin contact, clean the area with water and seek medical help immediately. Keep out of reach of children. Do not tilt an open battery. Battery discharge protection 84. DIESEL FUEL SYSTEM BLEEDING If the tank has been run dry, the diesel fuel system must be bled on ground level after fuelling at least 2 liters. Switch on the ignition three times for 15 seconds at a time. Then start the engine for a maximum of 40 seconds. Repeat this process after no less than 5 seconds. If the engine fails to start, seek the assistance of a CHEVROLET retailer. WIPER BLADE REPLACEMENT Lift wiper arm. Move release lever and detach wiper blade. 118 Vehicle care BULB REPLACEMENT HALOGEN HEADLIGHTS Properly functioning windshield wipers are essential for clear vision and safe driving. Regularly check the condition of the wiper blades. Replace hard, brittle or cracked blades or those that smear dirt on the windshield. Foreign material on the windshield or wiper blades can reduce the effectiveness of the wipers. If the blades are not wiping properly, clean both the windshield and the blades with a good cleaner or mild detergent. Rinse them thoroughly with water. Repeat the process, if necessary. There is no way to remove traces of silicone from glass. Therefore, never apply polish with silicone to your vehicle's windshield or you will get streaks which will impair the driver's vision. Do not use solvents, gasoline, kerosene, or paint thinner to clean wipers. These are harsh and can damage the blades and painted surfaces. Switch off the ignition and switch off the relevant switch or close the doors. Only hold a new bulb at the base! Do not touch the bulb glass with bare hands. Use only the same bulb type for replacement. Replace headlight bulbs from within the engine compartment. Note After heavy, driving rain or washing, headlight and taillight lenses could appear frosty. This condition is caused by the temperature difference between the lamp inside and outside. This is similar to the condensation on your windows inside your vehicle during the rain and doesn't indicate a problem with your vehicle. If the water leaks into the lamp bulb circuitry, have the vehicle checked by a CHEVROLET retailer. Low beam and high beam 1. Detach plug connector from bulb. 2. Remove protective cover. Warning The same rating of the bulb to be used during replacement and any usage of higher wattage bulbs can cause thermal issues such as melting of lamp housing and its surrounding parts. Warranty would be void if higher wattage bulbs are being used. Vehicle care 119 5. When fitting a new bulb, engage the lugs in the recesses on the reflector. 6. Engage the spring clip. 7. Place headlamp protective cover in position and close. 8. Plug connector onto bulb. Position lights 1. Detach plug connector from bulb. 3. Remove position light bulb holder from reflector. 3. Press spring clip, disengage and swivel it upward. 2. Remove protective cover. 4. Remove bulb from reflector housing. 4. Remove bulb from socket. 5. Insert new bulb. 120 Vehicle care SIDE TURN SIGNAL LAMPS (OSRVM) If the side turn signal lamp in the outside rearview mirror (OSRVM) is not operated, have the checked by CHEVROLET retailer. 6. Insert holder in reflector. 7. Place headlamp protective cover in position and close. 8. Plug connector onto bulb. TAIL LIGHTS Front turn signal lights 2. Push bulb into socket slightly, rotate anti-clockwise, remove and renew bulb. 3. Insert bulb holder in reflector, rotate clockwise to engage. 1. Open both covers. 1. Rotate bulb holder anti-clockwise and disengage. FOG LIGHTS Have bulbs replaced by a CHEVROLET retailer. Vehicle care 121 2. Unscrew both screws. 3. Remove tail light assembly. Take care that the cable duct remains in position. 4. Reverse light (1) Turn signal light (2) Tail light/brake light (3) 5. Rotate bulb holder anti-clockwise. 6. Remove bulb holder. Push bulb into socket slightly, rotate anticlockwise, remove and renew bulb. 7. Insert bulb holder into the tail light assembly and screw into place. Connect wiring plug. Install tail light assembly in body and tighten screws. Close covers and engage. 8. Switch on ignition, operate and check all lights. 122 Vehicle care NUMBER PLATE LIGHTS 1. Unscrew both screws. BOOT LID TAIL LIGHTS 2. Remove bulb housing downward, taking care not to pull on the cable. Rotate bulb holder anti-clockwise to disengage. 3. Remove bulb from holder and renew bulb. 4. Insert bulb holder in bulb housing and rotate clockwise. 5. Insert bulb housing and secure using a screwdriver. 1. Remove the boot lid panelling. 2. Rotate bulb holder anti-clockwise. Vehicle care 123 INTERIOR LIGHTS Courtesy light, Reading lights Have bulbs replaced by a CHEVROLET retailer. Load compartment light 3. Remove bulb holder. Push bulb into socket slightly, rotate anticlockwise, remove and renew bulb. 4. Insert bulb holder into boot lid. Refit the inner panelling to boot lid. 5. Switch on ignition, operate and check the lights. 2. Press bulb slightly towards spring clip and remove. 3. Insert new bulb. 4. Install lamp. 1. Prise the lamp out with a screwdriver. 124 Vehicle care ELECTRICAL SYSTEM FUSES Data on the replacement fuse must match the data on the defective fuse. There are two fuse boxes in the vehicle: n In the front left of the engine compartment, n Behind the glove box. In a box above the positive terminal of the battery are some main fuses. If necessary have them changed by a CHEVROLET retailer. Before replacing a fuse, turn off the respective switch and the ignition. A blown fuse can be recognised by its melted wire. Do not replace the fuse until the cause of the fault has been remedied. Some functions are protected by several fuses. Fuses may also be inserted without existence of a function. Fuse extractor A fuse extractor may be located in the fuse box in the engine compartment. Vehicle care 125 ENGINE COMPARTMENT FUSE BOX Place the fuse extractor on the various types of fuse from the top or side, and withdraw fuse. The fuse box is in the front left of the engine compartment. Disengage the cover, lift it upwards and remove. Not all fuse box descriptions in this Manual may apply to your vehicle. It is accurate at the time of printing. When inspecting the fuse box, refer to the fuse box label. 126 Vehicle care No. Circuit No. Circuit No. Circuit 1 Transmission control module 18 Fuel control module 35 Infotainment system, Amplifier 2 Engine control module 19 – 36 – 3 – 20 Fuel pump 37 High beam, right side 4 – 21 Rear power windows 38 High beam, left side 5 Ignition 22 – 39 – 6 Front wipers 23 – 40 – 7 – 24 Front power windows 41 – 8 Fuel injection 25 – 42 Cooling fan control 9 Fuel injection, ignition system 26 ABS* 43 – 10 Engine control module 27 Electronic key system 44 – 11 Lambda sensor 28 Heated rear window 45 Cooling fan 12 Starter solenoid 29 – 46 Cooling fan control 13 Canister vent sol 30 ABS 47 Lambda sensor 14 – 31 Body control module 48 Fog lights 15 – 32 Body control module 49 – 16 Ignition, Air quality sensor 33 Front seat heating 50 – 17 Ignition, Airbag 34 Sunroof 51 Horn Vehicle care 127 INSTRUMENT PANEL FUSE BOX No. Circuit No. Circuit 52 Instrument panel (MIL) 69 Battery voltage sensor 53 Electrochromatic mirror (ISRVM) 70 Rain sensor* 54 Light switch, Light control 71 – 55 Mirror folding 56 Windscreen washer 57 Steering column lock 58 – 59 Diesel fuel heating 60 Mirror heating 61 Mirror heating 62 Air condition clutch 63 Rear window sensor 64 Air quality sensor 65 Rear fog lamp 66 – 67 – 68 – The Instrument panel fuse box is located behind a cover in the glovebox. Open the glovebox and remove the cover. Not all fuse box descriptions in this Manual may apply to your vehicle. It is accurate at the time of printing. When inspecting the fuse box, refer to the fuse box label. 128 Vehicle care VEHICLE TOOLS No. Circuit No. Circuit 1 2 Infotainment system, handsfree phone – 6 Body control module Infotainment system Info display, parking assist, power sounder Cigarette lighter 7 8 Power outlet Body control module 9 Body control module 3 4 5 10 Body control module 11 A/C blower motor 12 – 13 Power seat 14 Diagnostic connector 15 Airbag 16 Central locking system, tailgate 17 Air condition system 18 – 19 Shift lever 20 – 21 Instrument cluster 22 Ignition, Electronic key system 23 Body control module 24 Body control module 25 Steering column lock 26 – The jack and the tools are in a stowage compartment in the load compartment below the spare wheel. Spare wheel 3 133. Vehicle care 129 WHEELS AND TYRES TYRE CONDITION, WHEEL CONDITION Drive over edges slowly and at right angles if possible. Driving over sharp edges can cause tyre and wheel damage. Do not trap tyres on the kerb when parking. Regularly check the wheels for damage. Seek the assistance of a CHEVROLET retailer in the event of damage or unusual wear. WINTER TYRES Winter tyres improve driving safety at temperatures below 7°C and should therefore be fitted on all wheels. In accordance with country-specific regulations, affix the speed sticker in the driver's field of view. TYRE DESIGNATIONS TYRE PRESSURE E.g. 215/60 R 16 95 H 215 = Tyre width, mm 60 = Cross-section ratio (tyre height to tyre width), % R = Belt type: Radial RF = Type: RunFlat 16 = Wheel diameter, inches 95 = Load index e.g. 95 is equivalent to 690 kg H = Speed code letter Speed code letter: Q = up to 160 km/h S = up to 180 km/h T = up to 190 km/h H = up to 210 km/h V = up to 240 km/h W = up to 270 km/h Check the pressure of cold tyres at least every 14 days and before any long journey. Do not forget the spare wheel. Unscrew the valve cap. Tyre pressure 172 and on the label on the front right door frame. The tyre pressure data refers to cold tyres. It applies to summer and winter tyres. Always inflate the spare tyre to the recommended tyre pressure 172. 130 Vehicle care TREAD DEPTH Incorrect tyre pressures will impair safety, vehicle handling, comfort and fuel economy and will increase tyre wear. Warning Check tread depth at regular intervals. Tyres should be replaced for safety reasons at a tread depth of 2-3 mm (4mm for winter tyres). the rear, swap round front wheels and rear wheels. Ensure that the direction of rotation of the wheels is the same as before. Tyres age, even if they are not used. We recommend tyre replacement every 6 years. If the pressure is too low, this can result in considerable tyre warmup and internal damage, leading to tread separation and even to tyre blow-out at high speeds. CHANGING TYRE AND WHEEL SIZE The legally permissible minimum tread depth (1.6 mm) has been reached when the tread has worn down as far as one of the tread wear indicators (TWI). Their position is indicated by markings on the sidewall. If there is more wear at the front than If tyres of a different size than those fitted at the factory are used, it may be necessary to reprogram the speedometer as well as the nominal tyre pressure and make other vehicle modifications. After converting to a different tyre size, have the label with tyre pressures replaced. Vehicle care 131 Warning Use of unsuitable tyres or wheels may lead to accidents and will invalidate the vehicle type approval. Warning Do not use different size and type of tyres and wheels than those originally installed on the vehicle. It can affect safety and performance of the vehicle. It could lead to handling failure or rollover and serious injury. When replacing tyres, be sure to install all four tyres and wheels of the same size, type, tread, brand and load-carrying capacity. The use of any other tyre size or type may seriously affect ride, handling, ground clearance, stopping distance, body clearance and speedometer reliability. WHEEL COVERS* WHEEL CHANGING Wheel covers and tyres that are factory approved for the respective vehicle and comply with all of the relevant wheel and tyre combination requirements must be used. Make the following preparations and observe the following information: If the wheel covers and tyres used are not factory approved, the tyres must not have a rim protection ridge. Wheel covers must not impair brake cooling. Warning Use of unsuitable tyres or wheel covers could lead to sudden pressure loss and thereby accidents. ■ Park the vehicle on a level, firm and non-skid surface. The front wheels must be in the straight-ahead position. ■ Apply the parking brake and engage first gear, reverse gear or P. ■ Remove the spare wheel 133. ■ Never change more than one wheel at once. ■ Use the jack only to change wheels in case of puncture, not for seasonal winter or summer tyre change. ■ If the ground on which the vehicle is standing is soft, a solid board (max. 1 cm thick) should be placed under the jack. ■ No people or animals may be in the vehicle when it is jacked-up. 132 Vehicle care ■ Never crawl under a jacked-up vehicle. ■ Do not start the vehicle when it is raised on the jack. ■ Clean wheel nuts and thread before mounting the wheel. 1. Disengage wheel nut caps with a screwdriver and remove. To protect the wheel, place a soft cloth between the screwdriver and the alloy wheel. Vehicle tools 128. Warning Do not grease wheel bolt, wheel nut and wheel nut cone. 3. Ensure the jack is positioned correctly with the vehicle jacking points. 2. Fold out the wheel wrench and install ensuring that it locates securely and loosen each wheel nut by half a turn. Vehicle care 133 SPARE WHEEL Attach wheel wrench and with the jack correctly aligned, rotate wheel wrench until wheel is clear of the ground. 5. Unscrew the wheel nuts. 6. Change the wheel. 7. Screw on the wheel nuts. 4. Set the jack to the necessary height. Position it directly below the jacking point in a manner that prevents it from slipping. 8. Lower vehicle. 9. Install the wheel wrench ensuring that it locates securely and tighten each nut in a crosswise sequence. Tightening torque is 140 Nm. 10. Align the valve hole in the wheel cover (if equipped) with the tyre valve before installing. Install wheel nut caps. 11. Stow the replaced wheel 133 and the vehicle tools 128. 12. Check the tyre pressure of the installed tyre and also the wheel nut torque as soon as possible. Have the defective tyre renewed or repaired. The spare wheel can be classified as a temporary spare wheel depending on the size compared to the other mounted wheels and country regulations. Caution Use of a spare wheel that is smaller than the other wheels or in combination with winter tyres could affect driveability. Have the defective tyre replaced as soon as possible. 134 Vehicle care JUMP STARTING The spare wheel is located in the load compartment beneath the floor covering. It is secured in the recess with a wing nut. The spare wheel well is not designed for all permitted tyre sizes. If a wheel wider than the spare must be stowed in the spare wheel well after changing wheels, the floor cover can be placed on the projecting wheel. Do not start with quick charger. A vehicle with a discharged battery can be started using jump leads and the battery of another vehicle. n n Warning Be extremely careful when starting with jump leads. Any deviation from the following instructions can lead to injuries or damage caused by battery explosion or damage to the electrical systems of both vehicles. Warning Avoid contact with eyes, skin, fabrics and painted surfaces. The fluid contains sulphuric acid which can cause injuries and damage in the event of direct contact. Never expose the battery to naked flames or sparks. n A discharged battery can already freeze at temperatures of 0°C. n n n n n n n n Defrost the frozen battery before connecting jump leads. Wear eye protection and protective clothing when handling a battery. Use a booster battery with the same voltage (12 volts). Its capacity (Ah) must not be much less than that of the discharged battery. Use jump leads with insulated terminals and a cross section of at least 16 mm2 (25 mm2 for diesel engines). Do not disconnect the discharged battery from the vehicle. Switch off all unnecessary electrical consumers. Do not lean over the battery during jump starting. Do not allow the terminals of one lead to touch those of the other lead. The vehicles must not come into contact with each other during the jump starting process. Apply the parking brake, manual transmission in neutral, automatic transmission in P. Vehicle care 135 TOWING TOWING THE VEHICLE Lead connection order: 1. Connect the red lead to the positive terminal of the booster battery. 2. Connect the other end of the red lead to the positive terminal of the discharged battery. 3. Connect the black lead to the negative terminal of the booster battery. 4. Connect the other end of the black lead to a vehicle grounding point, such as the engine block or an engine mounting bolt. Connect as far away from the discharged battery as possible, however at least 60 cm. Route the leads so that they cannot catch on rotating parts in the engine compartment. To start the engine: 1. Start the engine of the vehicle providing the jump. 2. After 5 minutes, start the other engine. Start attempts should be made for no longer than 15 seconds at an interval of 1 minute. 3. Allow both engines to idle for approx. 3 minutes with the leads connected. 4. Switch on electrical consumers(e.g. headlights, heated rear window) of the vehicle receiving the jump start. 5. Reverse above sequence exactly when removing leads. If you need to have your vehicle towed, please use our service network or professional towing company. The best method is to have the vehicle transported using a recovery vehicle. 136 Vehicle care Please observe the following procedures when towing a vehicle: n No passenger should remain in the vehicle being towed. n Release the parking brake of the towed vehicle and place the transmission gear in neutral. n Switch on the emergency warning lights. n Keep the speed limits. If it is not possible to have your vehicle towed by a recovery vehicle, proceed as follows: If towing by 2 wheels, lift the front driving wheels and tow with the front tyres locked. Disengage cap at front right bottom and remove downwards. The towing eye is stowed with the vehicle tools 128. Screw in the towing eye as far as it will go until it stops in a horizontal position. Attach a tow rope or better still a tow rod to the towing eye. The towing eye must only be used for towing and not for recovering the vehicle. Switch on ignition to release steering column lock and to permit operation of brake lights, horn and windscreen wipers. Transmission in neutral. Vehicle care 137 Caution Drive slowly. Do not drive jerkily. Excessive tractive force can damage the vehicle. When the engine is not running, considerably more force is needed to brake and steer. To prevent the entry of exhaust fumes from the towing vehicle, switch on the air recirculation and close the windows. Vehicles with automatic transmission: Do not tow the vehicle using tow eye. Towing with a tow rope could cause severe automatic transmission damage. When towing vehicle with automatic transmission, use flat bed or wheel lift equipment. Vehicles with manual transmission :The vehicle must be towed facing forwards, not faster than 80 km/h nor further than 100 km. In all other cases and when the transmission is defective, the front axle must be raised off the ground. Seek the assistance of a CHEVROLET retailer. After towing, unscrew the towing eye. Insert cap below and close cap. TOWING ANOTHER VEHICLE Screw in the towing eye as far as it will go until it stops in a horizontal position. The lashing eye (if equipped) at the rear underneath the vehicle must never be used as a towing eye. Disengage cap at rear right bottom and remove downwards. The towing eye is stowed with the vehicle tools 128. Attach a tow rope or better still a tow rod to the towing eye. The towing eye must only be used for towing and not for recovering a vehicle. 138 Vehicle care APPEARANCE CARE EXTERIOR CARE Caution Drive slowly. Do not drive jerkily. Excessive tractive force can damage the vehicle. Caution Hook (if equipped) for ocean shipping at the rear underneath of the vehicle: Do not use for towing or lashing. Do not use for tie-down for transportation with haulaway truck or train. After towing, unscrew the towing eye. Insert cap below and close cap. Locks The locks are lubricated at the factory using a high quality lock cylinder grease. Use de-icing agent only when absolutely necessary, as this has a degreasing effect and impairs lock function. After using de-icing agent, have the locks regreased by a CHEVROLET retailer. Washing The paintwork of your vehicle is exposed to environmental influences. Wash and wax your vehicle regularly. When using automatic vehicle washes, select a programme that includes waxing. Bird droppings, dead insects, resin, pollen and the like should be cleaned off immediately, as they contain aggressive constituents which can cause paint damage. If using a vehicle wash, comply with the vehicle wash manufacturer's instructions. The windscreen wipers must be switched off. Remove antenna and external accessories such as roof racks etc. If you use the auto car washer when the vehicle is unlocked, fuel filler flap might be open and it can be damaged during the auto car washer. Make sure to lock the fuel filler flap by using the central locking button. If you wash your vehicle by hand, make sure that the insides of the wheel housings are also thoroughly rinsed out. Clean edges and folds on opened doors and the bonnet as well as the areas they cover. Caution Always use a cleaning agent with pH value of 4 to 9. Do not use cleaning agents on hot surfaces. Have the door hinges of all doors greased by a CHEVROLET retailer. Do not clean the engine compartment with a steam-jet or high-pressure jet cleaner. Vehicle care 139 Thoroughly rinse and leather-off the vehicle. Rinse leather frequently. Use separate leathers for painted and glass surfaces: remnants of wax on the windows will impair vision. Do not use hard objects to remove spots of tar. Use tar removal spray on painted surfaces. Exterior lights Headlight and other light covers are made of plastic. Do not use any abrasive or caustic agents, do not use an ice scraper, and do not clean them dry. Polishing and waxing Wax the vehicle regularly (at the latest when water no longer beads). Otherwise, the paintwork will dry out. Polishing is necessary only if the paint has become dull or if solid deposits have become attached to it. Paintwork polish with silicone forms a protective film, making waxing unnecessary. Plastic body parts must not be treated with wax or polishing agents. Windows and windscreen wiper blades Use a soft lint-free cloth or chamois leather together with window cleaner and insect remover. When cleaning the rear window from inside, always wipe in parallel to the heating element to prevent damage. For mechanical removal of ice, use a sharp-edged ice scraper. Press the scraper firmly against the glass so that no dirt can get under it and scratch the glass. Clean smearing wiper blades with a soft cloth and window cleaner. Sunroof* Never clean with solvents or abrasive agents, fuels, aggressive media (e.g. paint cleaner, acetone-containing solutions etc.), acidic or highly alkaline media or abrasive pads. Do not apply wax or polishing agents to the middle part of the sunroof. Wheels and tyres Do not use high-pressure jet cleaners. Clean rims with a pH-neutral wheel cleaner. Rims are painted and can be treated with the same agents as the body. Paintwork damage Rectify minor paintwork damage with a touch-up pen before rust forms. Have more extensive damage or rust areas repaired by a CHEVROLET retailer. Underbody Some areas of the vehicle underbody have a PVC undercoating while other critical areas have a durable protective wax coating. After the underbody is washed, check the underbody and have it waxed if necessary. Bitumen/rubber materials could damage the PVC coating. Have underbody work carried out by a CHEVROLET retailer. 140 Vehicle care INTERIOR CARE Before and after winter, wash the underbody and have the protective wax coating checked. Interior and upholstery Only clean the vehicle interior, including the instrument panel fascia and panelling, with a dry cloth or interior cleaner. The instrument cluster and the displays should only be cleaned using a soft damp cloth. If necessary use a weak soap solution. Clean fabric upholstery with a vacuum cleaner and brush. Remove stains with an upholstery cleaner. Clothing fabrics may not be colourfast. This could cause visible discolourations, especially on light-coloured upholstery. Removable stains and discolourations should be cleaned as soon as possible. Clean seat belts with lukewarm water or interior cleaner. Caution Close Velcro fasteners, as open Velcro fasteners on clothing could damage seat upholstery. The same applies to clothing with sharp-edged object, like zips or belts or studded jeans. Clean up the dust on IP/door's mesh fabric with a vacuum cleaner. Remove stains with interior cleaner. Plastic and rubber parts Plastic and rubber parts can be cleaned with the same cleaner as used to clean the body. Use interior cleaner if necessary. Do not use any other agent. Avoid solvents and petrol in particular. Do not use high pressure jet cleaners. Infotainment system 141 INFOTAINMENT SYSTEM INTRODUCTION Introduction .................................. 141 Control elements overview ........ 143 Radio ............................................ 150 CD player .................................... 154 AUX input .................................... 157 USB port ...................................... 158 Bluetooth music* ......................... 159 The Infotainment system provides you with state-of-the-art in-car infotainment. For the AM and FM wavebands the radio is equipped with twelve automatically assignable channel presets. Furthermore, 36 channels can be allocated manually (waveband-independent). The integrated audio player will entertain you with audio CDs and MP3/WMA CDs. Furthermore, you can connect external data storage devices, e.g. iPod, MP3 player or USB stick, or a portable CD player to the Infotainment system as further audio sources; either via cable or via Bluetooth. The digital sound processor provides you with several preset equalizer modes for sound optimisation. Optionally, the Infotainment system can be operated using controls on the steering wheel. The well-thought-out design of the control elements, the clear displays and the GENERAL INFORMATION multifunctional MENU knob enable you to control the system easily and intuitively. Important information on operation and traffic safety Warning The Infotainment system has to be used so that the vehicle can be driven safely at all times. If in doubt stop your vehicle and operate the Infotainment system while the vehicle is stationary. Radio reception Radio reception may be disrupted by static, noise, distortion or loss of reception due to n changes in distance from the transmitter, n multi-path reception due to reflection, shadowing. 142 Infotainment system THEFT-DETERRENT FEATURE The Infotainment system is equipped with an electronic security system for the purpose of theft deterrent. The Infotainment system therefore functions only in your vehicle and is worthless for a thief. Infotainment system 143 CONTROL ELEMENTS OVERVIEW INSTRUMENT PANEL CD 400 144 Infotainment system 1 2 Knob ................................... 145 Press: Switch on/off Infotainment system ............... 145 Turn: Adjust volume .............. 145 Station buttons 1...6 ............... 150 Long press: Save station ........ 150 Short press: Select station ...... 150 3 Search backward .................... 150 Radio: Search backward ........ 150 CD/MP3/WMA: Skip track backward ................................ 156 4 CD/MP3/WMA: Start/ pause replay ..................................... 156 5 Search forward ....................... 150 Radio: Search forward ........... 150 CD/MP3/WMA: Skip track forward ................................... 156 6 CLOCK .................................... 61 If Infotainment system switched off: Display time and date .................................... 61 If Infotainment system switched on: Change setting for time and date ............................ 76 7 INFO........................................143 Additional, situation dependent information ............................ 143 8 TONE ..................................... 148 Tone settings .......................... 148 9 AS .......................................... 150 Automatic memory levels ...... 150 Short press: Select autostore list ........................................... 150 Long press: Save stations automatically .......................... 150 10 BACK .................................... 146 Menu: One level back ............ 146 Input: Delete last character or entire entry ......................... 146 11 CD Ejection ........................... 157 12 MENU ................................... 146 Central control for selection and navigation in menus ........ 146 13 FAV ......................................... 151 Favourite lists ......................... 151 14 MUTE .................................... 145 Activate/deactivate mute ........ 145 15 CONFIG ................................ 149 System settings ...................... 149 16 CD Slot ................................... 156 17 CD/AUX ................................ 157 Start CD/MP3/WMA replay or change audio source................ 157 18 BAND .................................... 150 Activate radio or change waveband ............................... 150 Infotainment system 145 STEERING WHEEL AUDIO CONTROLS SRC (Source)...........................145 Press: Select audio source ...... 145 If radio active: Turn upwards/ downwards to select next/ previous preset radio station .. 150 If CD player active: Turn upwards/downwards to select next/previous CD/MP3/WMA track ............. 156 2 Increase volume ..................... 145 3 Decrease volume .................... 145 4 Activate/deactivate mute ....... 145 1 USAGE CONTROL ELEMENTS The Infotainment system is operated via function buttons, multifunctional knobs and menus that are shown on the display. Inputs are made optionally via: n The central control unit in the instrument panel 143 n Controls on the steering wheel 145 SWITCHING THE INFOTAINMENT SYSTEM ON OR OFF Press the knob briefly. After switching on the last selected Infotainment source is active. Automatic switch-off If the Infotainment system has been switched on using the knob when the ignition was switched off, it will switch off again automatically 10 minutes after the last user input. SETTING THE VOLUME Turn the knob. The current setting is shown on the display. When the Infotainment system is switched on, the last selected volume is set, if that volume is lower than the maximum start up volume. The maximum start up volume 149 can be set separately. Speed compensated volume When speed compensated volume is activated 149 the volume is adapted automatically to make up for the road and wind noise as you drive. Mute Press the MUTE button to mute the audio sources. To cancel mute again: Turn the knob or press the MUTE button again. Volume limitation at high temperatures At very high temperatures inside the vehicle the Infotainment system limits the maximum adjustable volume. If necessary the volume is decreased automatically. 146 Infotainment system MODES OF OPERATION BASIC OPERATION Radio Press the BAND button to open the radio main menu or to change between the different wavebands. Press the MENU knob to open a submenu with options for station selection. Detailed description of the radio functions 150. Audio players Press the CD/AUX button to open the CD, USB, iPod, AUX or Bluetooth menu (if available) or to swap between these menus. Press the MENU knob to open a submenu with options for track selection. Detailed description of: n CD player functions 154 n AUX input functions 157 n USB port functions 158 n Bluetooth music functions* 159 MENU knob The MENU knob is the central control element for the menus. Turn n To mark a menu option n To set a numeric value Press n To select or activate the marked option n To confirm a set value n To switch a system function on/off BACK button Press the button briefly to: n Exit a menu n Return from a submenu to the next higher menu level EXAMPLES OF MENU OPERATION Selecting an option Turn the MENU knob to move the cursor (= coloured background) to the desired option. Press the MENU knob to select the marked option. Submenus An arrow on the right-hand edge of the menu indicates that after selection of the option a submenu with further options will be opened. Infotainment system 147 Activating a setting Setting a value Switching a function on or off Turn the MENU knob to mark the desired setting. Press the MENU knob to activate the setting. Turn the MENU knob to change the current value of the setting. Press the MENU knob to confirm the set value. Turn the MENU knob to mark the function to be switched on or off. Press the MENU knob to switch between the settings On and Off. 148 Infotainment system TONE SETTINGS In the tone settings menu the tone characteristics can be set differently for each radio waveband and each audio player source. Select :.Bass:, Midrange: or Treble : Set the desired value for the selected option. Setting the volume distribution between right - left (Balance) Setting the volume distribution between front - rear (Fader) Press the TONE button to open the tone menu. Setting bass, midrange and treble Select Fader:. Set the desired value. Select Balance:. Set the desired value. Setting an individual setting to “0” Select the desired option and press and hold the MENU knob for a few seconds. Setting all settings to "0" or "Off” Press and hold the TONE button for a few seconds. Infotainment system 149 VOLUME SETTINGS Optimizing the tone for the style of music Maximum startup volume Speed compensated volume Auto volume Select EQ: (Equalizer). The displayed options offer optimized bass, middle and treble presettings for the relevant style of music. Select the desired option. Press the CONFIG button to open the system settings menu. Select Radio settings and then Maximum startup volume. Set the desired value. Press the CONFIG button to open the system settings menu. Select Radio settings and then Auto volume control. Speed compensated volume can be deactivated or the degree of volume adaptation can be selected in the menu displayed. Select the desired option. 150 Infotainment system RADIO USAGE STATION SEARCH AUTOSTORE LISTS Control buttons The most important buttons for control of the radio are as follows: n BAND : Activate radio n : Station search n AS : Autostore lists n FAV : Favourite lists n 1...6 : Preset buttons Activating the radio Press the BAND button to open the radio main menu. The station last played will be received. Selecting the waveband Press the BAND button once or several times to select the desired waveband. The station last played in that waveband will be received. Automatic station search Briefly press the button or to play the next station in the station memory. Manual station search Press the button or for a few seconds to start a search for the next receivable station in the current waveband. When the required frequency has been reached the station is played automatically. Note Manual station search: If the radio does not find a station, it switches automatically to a more sensitive search level. If it still does not find a station, the frequency that was last active is set again. Manual station tuning Turn the MENU knob and set the optimal reception frequency on the popup frequency display. The stations that can be received best in a waveband can be searched for and stored automatically via the autostore function. Note The currently received station is marked by . Each waveband has 2 autostore lists (AS 1, AS 2), in each of which 6 stations can be stored. Infotainment system 151 Automatic station storing Keep the AS button pressed until an autostore message is displayed. The 12 strongest stations in the current waveband will be stored in the 2 autostore lists. To abort the autostore procedure, press the MENU knob. Storing stations manually Stations can also be stored manually in the autostore lists. Set the station to be stored. Briefly press the AS button to open an autostore list or to switch to another autostore list. To store the station in a list position: Press the corresponding station button 1...6 until a confirmation message is displayed. Note Manually stored stations are overwritten in an automatic station storing process. Retrieving a station Briefly press the AS button to open an autostore list or to switch to another autostore list. Briefly press one of the station buttons 1...6, to open the station at the corresponding list position. FAVOURITE LISTS Stations of all wavebands can be stored manually in the favourite lists. 6 stations can be stored in each favourite list. The number of available favourite lists can be set 152. Note The currently received station is marked by . Storing a station Set the station to be stored. Briefly press the FAV button to open a favourite list or to switch to another favourite list. To store the station in a list position: Press the corresponding station button 1...6 until a confirmation message is displayed. Retrieving a station Briefly press the FAV button to open a favourite list or to switch to another favourite list. Briefly press one of the station buttons 1...6, to open the station at the related list position. 152 Infotainment system Defining the number of available favourite lists Note The following FM specific displays are shown as examples. FM category list Press the CONFIG button. Select Radio settings and then Radio favourites. Select the desired number of available favourite lists. WAVE BAND MENUS Alternative facilities for station selection are available via waveband specific menus. With the radio main menu active press the MENU knob to open the relevant waveband menu. Favourites list Select Favourites list. All stations saved in the favourites lists are displayed. Stations lists Select AM stations list or FM stations list. All receivable AM/FM stations in the current reception area are displayed. Note If no station list has been created beforehand, the Infotainment system performs an automatic station search. Favourites list FM 102.3 (FAV 1 - P1) FM 96.8 (FAV 1 - P2) FM 89.0 (FAV 1 - P3) Select the required station. Note The currently received station is marked by . Select the required station. Note The currently received station is marked by . Infotainment system 153 RADIO RECEPTION Updating stations lists If the stations stored in a wavebandspecific station list can no longer be received: Select the corresponding command to update a station list. The dual tuner of the Infotainment system continuously updates the FM stations list in the background. No manual update is required. A station search is started. Once the search is completed the station last received will be played. To abort the station search, press the MENU knob. Frequency interference and static can occur during normal radio reception if items such as cell phone chargers, vehicle convenience accessories, and external electronic devices are plugged into the accessory power outlet. If there is interference or static, unplug the item from the accessory power outlet. FM FM signals only reach about 16 to 65 km (10 to 40 miles). Although the radio has a built-in electronic circuit that automatically works to reduce interference, some static can occur, especially around tall buildings or hills, causing the sound to fade in and out. AM The range for most AM stations is greater than for FM, especially at night. The longer range can cause station frequencies to interfere with each other. For better radio reception, most AM radio stations boost the power levels during the day, and then reduce these levels during the night. Static can also occur when things like storms and power lines interfere with radio reception. When this happens, try reducing the treble on the radio. Cellular phone usage Cellular phone usage may cause interference with the vehicle's radio. This interference may occur when making or receiving phone calls, charging the phone's battery, or simply having the phone on. This interference can cause an increased level of static while listening to the radio. If static is received while listening to the radio, unplug the cellular phone and turn it off. Backglass antenna The AM-FM antenna is integrated with the rear window defogger, located in the rear window. Make sure that the inside surface of the rear window is not scratched and that the lines on the glass are not damaged. If the inside surface is damaged, it could interfere with radio reception. For proper radio reception, the antenna connector needs to be prop- 154 Infotainment system CD PLAYER GENERAL INFORMATION erly attached to the post on the glass. If a cellular telephone antenna needs to be attached to the glass, make sure that the grid lines for the AM-FM antenna are not damaged. There is enough space between the grid lines to attach a cellular telephone antenna without interfering with radio reception . Caution Using a razor blade or sharp object to clear the inside rear window can damage the rear window antenna and/or the rear window defogger. Repairs would not be covered by the vehicle warranty. Do not clear the inside rear window with sharp objects. Caution Do not apply aftermarket glass tinting with metallic film. The metallic film in some tinting materials will interfere with or distort the incoming radio reception. Any damage caused to your backglass antenna due to metallic tinting materials will not be covered by the vehicle warranty. The Infotainment system's CD player can play audio CDs and MP3/WMA CDs. Important information about audio CDs and MP3/WMA CDs Caution Under no circumstances place DVDs, single-CDs with a diameter of 8 cm or shaped CDs in the audio player. You must not put any stickers on CDs. These discs can get jammed in the CD drive and ruin the drive. An expensive replacement of the device will then be necessary. n The following CD formats can be used: CD-ROM Mode 1 and Mode 2. CD-ROM XA Mode 2, Form 1 and Form 2. Infotainment system 155 n n n n n The following file formats can be used: ISO9660 Level 1, Level 2. MP3 and WMA files written in any format other than listed above may not play correctly, and their file names and folder names may not be displayed correctly. Audio CDs with copy protection, which are not in compliance with the audio CD standard, may not play correctly or not at all. Self-recorded CD-Rs and CD-RWs are more vulnerable to mishandling than prerecorded CDs. Correct handling, especially in the case of selfrecorded CD-Rs and CD-RWs, must be ensured. See below. Self-recorded CD-Rs and CD-RWs may not play correctly or not at all. In such cases it is not the equipment that is at fault. On mixed mode CDs (audio tracks and compressed files, e. g. Mp3, are n n n n n stored), the audio tracks part and the compressed files part can be played separately. Avoid leaving fingerprints when you change CDs. Put CDs back in their sleeves immediately after removing them from the CD player in order to protect them from damage and dirt. Dirt and liquids on CDs can smear the lens of the CD player inside the device and cause faults. Protect CDs from heat and direct sunlight. The following restrictions apply for the data stored on an MP3/WMA CD: Number of tracks: Max. 999. Number of folders: Max. 255. Folder structure depth: Max. 64 levels (recommended: max. 8 levels). Number of playlists: Max. 15. Number of songs per playlist: Max. 255. Applicable playlist extensions: .m3u, .pls, .asx, .wpl. n This chapter deals only with playing MP3 files since the operation for MP3 and WMA files is identical. When a CD with WMA files is loaded MP3 related menus are displayed. 156 Infotainment system USAGE STARTING CD REPLAY Press the CD/AUX button to open the CD or MP3 menu. If there is a CD in the CD player, CD replay is started. Depending on the data stored on the audio CD or MP3 CD differing information about the CD and the current music track will be shown on the display. Inserting a CD Insert a CD with the printed side facing up into the CD slot until it is drawn in. Skipping to the next track or previous track Briefly press the button or . Fast forward or rewind Press the button or and hold it down to fast forward or rewind the current track. Selecting tracks using the audio CD or MP3 menu During audio CD replay Press the MENU knob to open the audio CD related menu. To play all tracks in random order: Set Shuffle songs to On. To select a track on the audio CD: Select Tracks list and then select the desired track. During MP3 replay CD menu Shuffle songs Playlists / Folders Off Search Press the MENU knob to open the MP3 related menu. To play all tracks in random order: Set Shuffle songs to On. To select a track from a folder or playlist (if available): Select Playlists/ Folders. Select a folder or playlist and then select the desired track. Note If a CD contains both audio and MP3 data, the audio data can be selected from Playlists/Folders. Infotainment system 157 AUX INPUT GENERAL INFORMATION USAGE Under the cover on the centre console there is an AUX socket for the connection of external audio sources. Note The socket must always be kept clean and dry. It is possible, for example, to connect a portable CD player with a 3.5 mm jack plug to the AUX input. Press the CD/AUX button once or several times to activate the AUX mode. An audio source that is connected to the AUX input can be operated only via the control elements of the audio source. To open a menu with additional options for track search and selection: Select Search. What options are available depends on the data saved on the MP3 CD. The search process on the MP3 CD may take several minutes. During this time the station last played will be received. Removing a CD Press the button. The CD is pushed out of the CD slot. If the CD is not removed after ejection, it will be drawn back in again automatically after a few seconds. 158 Infotainment system USB PORT GENERAL INFORMATION (only CD 400 with PDIM) Under the cover on the centre console there is a USB socket for the connection of external audio sources. Devices connected to the USB port are operated via the controls and menus of the Infotainment system. Note The socket must always be kept clean and dry. Important information The following devices can be connected to the USB port: n iPod n Zune n PlaysForSure device (PFD) n USB drive Note Not all iPod, Zune, PFD or USB drive models are supported by the Infotainment system. Note Do not insert a USB drive device longer than 70 mm. A longer device may be damaged when folding down the armrest. Playing saved audio files Press the CD/AUX button once or several times to activate the USB mode. Replay of the audio data stored on the USB device is started. The operation of data sources connected via USB is mainly the same as for an audio MP3 CD 156. Below only the aspects of operation that are different/additional are described. Operation and the screen displays are described for USB drives only. Operation of other devices like iPod or Zune is mainly the same. Infotainment system 159 BLUETOOTH MUSIC* GENERAL INFORMATION Selecting tracks using the USB menu Press the MENU knob to open the USB related menu. To play all tracks in succession: Select Play all. To display a menu with various additional options for track search and selection: Select Search. The search process on the USB device may take several minutes. During this time the station last played will be received. To play all tracks in random order: Set Shuffle songs (random) to On. To repeat the currently played track: Set Repeat to On. (only CD 400 with Bluetooth PDIM) Bluetooth enabled audio sources (e. g. music mobile phones, MP3 players featuring Bluetooth, etc.), which support Bluetooth music protocol A2DP, can be connected wirelessly to the Infotainment system. Important information n Before a Bluetooth device can be connected to the Infotainment system, it must first be paired to the system 160. n The Infotainment system only connects to Bluetooth devices that support A2DP (Advanced Audio Distribution Profile) version 1.2 or higher. n The Bluetooth device must support AVRCP (Audio Video Remote Control Profile) version 1.0 or higher. If the device does not support AVRCP only the volume can be controlled via the Infotainment system. n Before connecting the Bluetooth device to the Infotainment system, become acquainted with its user guide for Bluetooth functions. BLUETOOTH MUSIC SETUP With the Bluetooth music setup menu pairing and connection of Bluetooth devices to the Infotainment system are carried out. Activating the Bluetooth music setup menu Press the CD/AUX button once or several times to activate AUX, USB or Bluetooth mode. Press the MENU knob and then select Bluetooth setup. 160 Infotainment system Pairing a Bluetooth device Important information n The pairing process is disabled when the vehicle is moving. n Up to five devices can be paired to the system. n The Infotainment system automatically connects to the first device in the list of currently paired devices. n Only one paired device can be connected to the Infotainment system at a time. n Pairing normally only needs to be carried out once, unless changes to the pairing information have been made or the device is deleted. Performing pairing Select Connect to new device. The Infotainment system asks a series of questions to determine what type of Bluetooth device is being paired. After determination is performed, the Bluetooth device needs to be put into discovery mode (see user guide of Bluetooth device). Some Bluetooth devices may require a PIN code in order to complete the pairing process. Locate the device named GMusicConnect in the list on the Bluetooth device and follow the instructions on the device to enter the PIN code provided by the Infotainment system. Connecting a paired device Select Select device. A list of all Bluetooth devices currently paired to the Infotainment system is displayed. Select the desired device. The device is connected to the Infotainment system. If another Bluetooth device is currently connected to the Infotainment system this device is disconnected from the system. Removing a paired device Select Remove device. A list of all Bluetooth devices currently paired to the Infotainment system is displayed. Select the desired device. The device is removed from the list of paired devices. Changing the default PIN Select Change default PIN. Select one of the pre-defined PIN codes, or select Other to create a new PIN. Infotainment system 161 OPERATION To create a new PIN Select Other and then the desired length of the PIN code. Select the digits of the desired PIN code one at a time. To delete already entered digits: Press the BACK button. Press the CD/AUX button once or several times to activate Bluetooth mode. The first device in the list of currently paired Bluetooth devices 160 is automatically connected (if available) to the Infotainment system. To connect to another paired Bluetooth device 160. Starting replay of tracks Depending on the connected Bluetooth device: n Replay of music starts automatically or n Replay of music has to be started with the controls on the Bluetooth device. Replay of music data stored on the Bluetooth device can now be controlled via the Infotainment system using the , and buttons. Skipping to next or previous track Briefly press the button or . Fast forward or rewind Press the button or and hold it down to fast forward or rewind the current track. Pause replay Press the button. To restart replay press the button again. 162 Infotainment system NOTE Service and maintenance 163 SERVICE AND MAINTENANCE General information ...................... 163 Scheduled maintenance ................ 164 Recommended fluids and lubricants ...................................... 167 GENERAL INFORMATION SERVICE INFORMATION In order to ensure economical and safe vehicle operation and to maintain the value of your vehicle, it is of vital importance that all maintenance work is carried out at the proper intervals as specified. See your service booklet for the service schedules and for more information. ADDITIONAL SERVICING Extreme operating conditions Extreme operating conditions are given when at least one of the following occurs frequently: n Repeated short-distance driving less than 5 miles (10 kms). n Extensive idling and/or slow-speed driving in stop-and-go traffic. n Driving on dusty roads. n Driving on hilly or mountainous terrain. Caution Chevrolet recommends to consult authorized CHEVROLET retailer for instructions and vehicle health checkup before setting out a long journey. Towing a trailer. Driving in heavy city traffic where the outside temperatures regularly reach 90° F (32°C) or higher. n Driving as a taxi, police or delivery vehicle. n Frequent driving when outside temperature remains below freezing. Police vehicles, taxis and driving school vehicles are also classified as operating under extreme conditions. Under extreme operating conditions, it may be necessary to have certain scheduled service work done more frequently than the scheduled intervals. Seek technical advice on the servicing requirements dependent on the specific operating conditions. n n OIL LIFE MONITORING FOR DIESEL ENGINES The service intervals are based on several parameters depending on usage and are calculated using these parameters. The engine oil life monitoring lets you know when to change the engine oil 65. 164 Service and maintenance SCHEDULED MAINTENANCE SERVICE SCHEDULES Maintenance services and record retention are the owner’s responsibility. You should retain evidence that proper maintenance has been performed on your vehicle in accordance with the scheduled maintenance services chart. For vehicles with normal annual mileage. 4 Years/60000 4.5 Years/67500 5 Years/75000 5.5 Years/82500 6 Years/90000 6.5 Years/97500 7 Years/105000 I R I R I I I I I I I I I I R I I I I I I R I R I R I R I R I R I I I I I I I I I I I I R I I R I I R I I I I I I I I I I I I I 3 Years/45000 R 2.5 Years/37500 I 2 Years/30000 R 1.5 Years/22500 I 1 Year/15000 3.5 Years/52500 Kilometers or time in months, whichever comes first 6 Months/7500 MAINTENANCE INTERVAL Engine Oil and Engine Oil Filter (1) (3) I R I R I R Cooling System Hose and Connections I I I I I Engine Coolant (3) I I I I I Fuel Filter I R I R Fuel Line and Connections I I I I Air Cleaner Element (2) I I R PCV System I I I MAINTENANCE ITEM ENGINE CONTROL SYSTEM I Drive Belt (Alternator, Power Steering and A/C Compressor) I I I I I I Chart Symbols: I- Inspect these items and their related parts. If necessary, correct, clean, replenish, adjust, rotate or replace. R- Replace or change. (1) If a vehicle is operated under severe conditions: short distance driving, extensive idling or driving in dusty conditions, change engine oil and the filter every 7,500 kms or 6 months, whichever comes first. (2) Inspect the air cleaner element every 7,500 kms or 6 months if vehicle is driven under dusty driving conditions. If necessary, correct, clean, or replace. (3) Refer to “Recommended Fluids and Lubricants”. Service and maintenance 165 For vehicles with normal annual mileage. 1 Year/15000 1.5 Years/22500 2 Years/30000 2.5 Years/37500 3 Years/45000 3.5 Years/52500 4 Years/60000 4.5 Years/67500 5 Years/75000 5.5 Years/82500 6 Years/90000 6.5 Years/97500 7 Years/105000 Kilometers or time in months, whichever comes first 6 Months/7500 MAINTENANCE INTERVAL Exhaust Pipe and Mountings I I I I I I I I I I I I I I Brake Fluid / Clutch Fluid (3) (4) I I I R I I I R I I I R I I Front Brake Pads and Discs (5) I I I I I I I I I I I I I I Rear Brake Pads and Discs (5) I I I I I I I I I I I I I I Parking Brake I I I I I I I I I I I I I I Brake Line and Connections (Including Booster) I I I I I I I I I I I I I I Manual Transaxle: Leak Check (3) I I I I I I I I I I I I I I Chassis and Underbody Bolts and Nuts Tight / Secure I I I I I I I I I I I I I I MAINTENANCE ITEM CHASSIS AND BODY Chart Symbols: I- Inspect these items and their related parts. If necessary, correct, clean, replenish, adjust, rotate or replace. R- Replace or change. (3) Refer to “Recommended Fluids and Lubricants”. (4) Change the brake fluid every 20,000 kms or 2 years (whichever is earlier) if the vehicle is mainly driven under severe conditions: - Driving in hilly or mountainous terrain, or - Towing a trailer frequently. (5) More frequent maintenance is required if under severe condition: short distance driving, frequent low-speed operation in stop-and go traffic or driving in dusty conditions. 166 Service and maintenance For vehicles with normal annual mileage. 5.5 Years/82500 6 Years/90000 6.5 Years/97500 7 Years/105000 5 Years/75000 4.5 Years/67500 4 Years/60000 3.5 Years/52500 3 Years/45000 2.5 Years/37500 2 Years/30000 1.5 Years/22500 1 Year/15000 MAINTENANCE ITEM Kilometers or time in months, whichever comes first 6 Months/7500 MAINTENANCE INTERVAL I I I I CHASSIS AND BODY See remarks (7) under "Chart Symbols". Automatic Transaxle Fluid (7) (3) Tyre Condition & Inflation Pressure I I I I I I I I I I As and when required or as suggested by CHEVROLET authorized retailer Wheel Alignment (6) As and when required or as suggested by CHEVROLET authorized retailer Wheel Balancing (6) Steering Wheel and Linkage I I I I I I I I I I I I I I Power Steering Fluid and Lines I I I I I I I I I I I I I I Drive Shaft Boots I I I I I I I I I I I I I I Safety Belts, Buckles and Anchorages I I I I I I I I I I I I I I Lubricate Locks, Hinges and Hood Latch L L L L L L L L L L L L L L A/C Mesh Filter I I I I I I I I I I I I I I Chart Symbols: I- Inspect these items and their related parts. If necessary, correct, clean, replenish, adjust, rotate or replace. R- Replace or change. L- Lubricate. (3) Refer to “Recommended Fluids and Lubricants”. (6 ) If necessary, rotate and balance wheels. (7 ) Replace every 1,57,500 kms for normal driving condition (Inspection is not required. A fluid inspection is only required if there is a transmission failure or a fluid leak.) Replace every 75,000 kms for severe driving condition as below - For vehicles mainly driven in heavy city traffic in hot weather, in hilly or mountainous terrain, when frequently towing a trailer, or used for taxi, police or delivery service. Service and maintenance 167 RECOMMENDED FLUIDS AND LUBRICANTS Item Capacity Service Interval Classification Engine Oil (Including Oil Filter) 5.4L Change every 15,000 kms or 1 year (whichever is earlier) 5W-30 ACEA A3/B4 Engine Coolant 7.5L Change every 52,500 kms or 3.5 years (whichever is earlier) Ethylene Glycol Based Long Life Coolant Manual Transaxle Fluid 1.8L Fluid change or Inspection is not required unless there is a transmission failure or a fluid leak BOT303 Mod Automatic Transaxle Fluid 8.77L Replace every 1,57,500 kms for normal driving condition (Inspection is not required. A fluid inspection is only required if there is a transmission failure or a fluid leak.) Replace every 75,000 kms for severe driving condition as below - For vehicles mainly driven in heavy city traffic in hot weather, in hilly or mountaneous terrain, when frequently towing a trailer, or used for taxi, police or delivery service DEXRON VI Brake & Clutch Fluid 0.75L Change every 30,000 kms or 2 years (whichever is earlier) DOT4 Power Steering Fluid 1.2L Inspect every 15,000 kms or 1 year (whichever is earlier) and replenish if necessary. DEXRON VI 168 Service and maintenance RECOMMENDED FLUIDS AND LUBRICANTS Only use products that have been tested and approved. Damage resulting from the use of non-approved materials will not be covered by the warranty. Warning Operating materials are hazardous and could be poisonous. Handle with care. Pay attention to information given on containers. Topping up engine oil Only use 5W-30 ACEA A3/B4 Engine oil. Use of ACEA A1/B1 and A5/B5 engine oil is expressly forbidden, since they can cause long-term engine damage under certain operating conditions. Engine oil additives The use of engine oil additives could cause damage and invalidate the warranty. Coolant and antifreeze Use GMI supplied premix coolant only. Coolant additives intended to give additional corrosion protection or seal against minor leaks can cause function problems. Liability for consequences resulting from the use of coolant additives will be rejected. Brake and clutch fluid Only use DOT4 brake fluid. Over time, brake fluid absorbs moisture which will reduce braking effectiveness. The brake fluid should therefore be replaced at the specified interval. Brake fluid should be stored in a sealed container to avoid water absorption. Ensure brake fluid does not become contaminated. Caution Using brake fluid other than GM recommended brake fluid may cause corrosion to components of brake system. Corrosion may make the brake system not work well and could cause a crash. Power steering fluid Only use Dexron VI fluid. Automatic transmission fluid Only use Dexron VI fluid. Manual transmission fluid Only use BOT303 Mod fluid. Technical data 169 TECHNICAL DATA Vehicle identification ................... 169 Vehicle data .................................. 170 VEHICLE IDENTIFICATION VEHICLE IDENTIFICATION NUMBER IDENTIFICATION PLATE The vehicle identification number is located in the vehicle floor on the righthand side under a cover between the front door and seat. The identification plate is located on the front left door frame. 170 Technical data VEHICLE DATA ENGINE DATA Sales designation Z20D1 Engine identifier code LNP Number of cylinders 4 Piston displacement [cm3 ] 1998 Engine power [kW] at rpm 122.1 3800 Torque [Nm] at rpm 380 2000 Fuel type Diesel PERFORMANCE Engine Z20D1 Top speed 1) [km/h] Manual transmission 210 Automatic transmission 200 1) The maximum speed indicated is achievable at kerb weight (without driver) plus 200 kg payload. Optional equipment could reduce the specified maximum speed of the vehicle. Technical data 171 VEHICLE WEIGHT Maximum GVW, Kg (for rigid vehicles) With air conditioning [Kg] Engine Manual transmission Automatic transmission Z20D1 1970 1985 Engine Manual transmission Automatic transmission Z20D1 1525[LT] / 1545[LTZ] 1560 Kerb weight, Kg With air conditioning [Kg] VEHICLE DIMENSIONS Length [mm] 4597 Width without exterior mirrors [mm] 1788 Width with two exterior mirrors [mm] 2067 Height (without antenna) [mm] 1477 Length of load compartment floor [mm] 1014 Load compartment width [mm] 1010 Load compartment height [mm] 512 Wheelbase [mm] 2685 Min. turning circle diameter [mm] 10900 172 Technical data CAPACITIES Engine oil Engine Z20D1 Including Filter [l] 5.4 Between MIN and MAX [l] 1.0 Fuel tank Diesel, nominal capacity [l] 60 TYRE PRESSURES Engine Z20D1 Tyres 205/60 R16 Front Rear kPa/bar (psi) kPa/bar (psi) 220/2.2 (32) 220/2.2 (32) Technical data 173 BULB SPECIFICATIONS Bulbs Front Rear Wattage & Qty. Remarks 60/55W x 2 Halogen 1 Head lamp (High/Low) 2 Parking lamp 5W x 2 3 Turn signal lamp 21W x 2 Amber 4 Fog lamp* 35W x 2 Halogen 5 Side turn signal lamp 5W x 2 6 Outside mirror turn signal lamp* 1.2W x 2 LED type 7 Turn signal lamp 21W x 2 Amber 8 Brake / Tail lamp 21/5W x 2 9 Reversing lamp 10 Boot lid Tail lamp 21/5W x 2 11 CHMSL (Center high mounted stop lamp) LED 12EA 12 Number plate lamp 16W x 2 LED type 5W x 2 Bulb specification in some model can be different from the above table. See the wattage printed on the bulb before replacing burnt bulbs. Warning The same rating of the bulb to be used during replacement and any usage of higher wattage bulbs can cause thermal issues such as melting of lamp housing and its surrounding parts. Warranty would be void if higher wattage bulbs are being used. 174 Technical data NOTE Service and warranty 175 SERVICE AND WARRANTY Standard limited warranty coverage ....................................... 176 Predelivery inspection and vehicle delivery ............................ 183 Owner's statement of acceptance .................................... 185 Chevrolet service ......................... 187 Maintenance record sheet ............ 193 Battery .......................................... 195 Separate corrosion protection service .......................................... 196 Body inspection record ................ 197 Emission warranty ....................... 199 Annexure-I ................................... 203 Annexure-II .................................. 204 176 Service and warranty STANDARD LIMITED WARRANTY COVERAGE 1. SCOPE General Motors India Private Limited, a private limited company incorporated under the companies Act 1956 and having its Works/Registered office at Chandrapura Industrial Estate, Halol, District Panchmahals, Gujarat 389351 (“General Motors India”) warrants that your new Chevrolet Cruze (“vehicle”) is free from defect in material or workmanship, subject to your compliance with the following terms and conditions mentioned hereunder and other vehicle maintenance norms as mentioned elsewhere in this service booklet. Only an authorized CHEVROLET retailer as mentioned in this booklet will make the necessary repairs, using new, re-conditioned or remanufactured parts with a view to correcting any defect covered by this warranty. 2. WHAT IS COVERED Time and distance limits for New Vehicle Warranty coverage. Warranty Type Warranty Limits Other Warranties A : General Three (3) years or 1,00,000 kms (whichever is earlier) from the date of delivery by a CHEVROLET retailer or the date of first registration of the motor vehicle, whichever occurs first. These parts are covered by other warranties : 1. Battery (one (1) year) (covered by the battery manufacturer**) 2. Tyres (one (1) year) (covered by the tyre manufacturer**) 3. Audio/Radio/Acc. (one (1) year) (covered by the Audio/Radio/Acc. manufacturer**) See clause 5. B : Rust Through* Three (3) years from the date of delivery of the motor vehicle or from the date of first registration of the motor vehicle, whichever occurs first. The warranty covers exterior body metal except : 1. Items not covered by warranty listed in Section 3 2. Exhaust pipe and fuel system rust * A hole through a body panel caused by rust / corrosion from inside to outside. ** Service / warranty shall be provided by the concerned equipment manufacturer. Service and warranty 177 • The obligation under this New Vehicle Warranty is limited to the repair of the new motor vehicle at no charge by the Chevrolet authorized retailer. For parts replaced during such repair the same warranty applies until the end of the New Vehicle Warranty period as stipulated herein. All warranty claims expire at the end of the warranty period as specified under Clause 2. The Owner is responsible for any repair or replacement which are not covered by this warranty. • Liability of General Motors India Pvt. Ltd. under this New Vehicle Warranty is limited to the value of the service, repairs/ replacement of parts found to be defective within the warranty period. Beyond servicing and/or repairing defective parts in the vehicle, General Motors India Pvt. Ltd. does not undertake to replace the vehicle / or reimburse the purchaser by payment of any money in respect of the vehicle purchased by them. • Under the terms of New Vehicle Warranty, installation, free service will be provided only within the municipal limits of the cities/towns where General Motors India Pvt. Ltd. has its service network, as elaborated elsewhere in this Owner's Manual. This list of authorized retailers is subject to change/modification without prior notice. Service outside the municipal limits specified above will be provided after charging the actual to and fro traveling and incidental expenses, as prevailing from time to time. • Necessary care and caution is taken in manufacturing of the vehicle, however, General Motors India Pvt. Ltd. shall not be liable for any loss or damage caused to any article, property, death or disability caused to any human life arising out of fire, electric fault, short circuit, accidental handling or negligent use of the vehicle. The maximum liability in monetary terms shall be restricted to the value of the defective parts and / or value of services rendered only. Furthermore, the New Vehicle Warranty, in no case, shall extend to the payment of any monetary consideration whatsoever, of the replacement or return of the vehicle as a whole. • The decision of General Motors India Pvt. Ltd. will be final and binding on all matters arising out of this New Vehicle Warranty. • The owner should preserve the original Invoice for necessary verification and produce the same, as and when required. • The optimum performance of the vehicle is under standard test conditions. This New Vehicle Warranty is issued at Halol, District Panchmahals, Gujarat and competent courts shall have exclusive jurisdiction over matters by or following from time to time. 178 Service and warranty 3. WARRANTY LIMITATIONS The warranty will cease to exist in following conditions: a. Failure to have the required periodic inspection and required service performed as per the Periodic Maintenance Schedule. b. Improper or wrong maintenance and in deviation with guidelines mentioned in this service booklet. c. Any modification, alterations made to the vehicle such as including but not restricted to adding lights, changing engine specifications to increase horsepower, or using wide tyres, and or any other modification in the vehicle that may likely to have an effect on the performance of the vehicle. (e.g. defects caused by the installation of non homologated wheels and tyres are not covered by the warranty). d. Failure to use genuine parts / fluids (oil, coolant, brake fluid) and / or other accessories / consumables recommended or approved by General Motors India Pvt. Ltd. e. Use of the vehicle for purposes or in a manner other than the one mentioned in the Owner's Manual. Exceeding specified capacities such as loading weight, passenger, speed, use as a commercial vehicle and rpm limitations. f. Damage caused by driving the vehicle under severe conditions such as un-pliable or water-logged roads, in races or rallies. g. Damage caused by natural disasters including but not restricted to earthquakes, storms, floods, fire and accidents. The owners are recommended to keep their vehicle insurance valid at all times. h. Damage caused by smoke, chemicals, bird-droppings, salt, stone chipping, scratches, iron dust or any other extraneous circumstances like external mechanical or chemical influences (regarding paint or body damage, specially stone throw, air-borne rust, industrial fall out), damage to catalytic converter due to use of wrong/bad quality fuel acting on the vehicle. i. Damage caused by normal wear (for instance brake-pad, etc.) or exposure to the elements such as discoloring or deformation of any interior, plastic, chrome or painted part or surface. j. Sensory complaint by the owner against symptoms such as noise, vibration or oil stains which do not effect performance. Service and warranty 179 k. Damage which should have been detected during normal usage but became serious when left unattended to and/or the owner of the vehicle having failed to claim and having rectified a defect which was already apparent during vehicle delivery, immediately after delivery or a defect which becomes apparent at a later date immediately after it became apparent. l. Failure of the owner to adhere to the requirements outlined in Clause 4. m. Fuel system damage caused by water or other foreign matter in the fuel system. n. Damage caused by the installation of non genuine accessories or equipment after the vehicle has been purchased from the CHEVROLET retailer such as radio, car telephone, CD radio set, or cargo carrier and / or other activities of a similar nature. o. Damage caused by running vehicle on adulterated fuel/lubricants or fuel/lubricants other than those specified by General Motors India Pvt. Ltd. WHAT IS NOT COVERED • Adjustments, cleaning, inspection, or required periodic maintenance. • Parts designated as requiring periodic replacement. • Warranty repair not performed by a CHEVROLET retailer. • Charges or fees for telephone, tow, transportation charges of the vehicle to the nearest CHEVROLET retailer, rental car, and so forth; compensation for inconvenience or commercial losses; all other consequential costs relating to the owner being unable to use the vehicle. • Any accident, damage, loss or destruction due to negligent, careless use of vehicle. • Damage to the engine while driving in water logged conditions or entry of water in to the engine. • Consumptive parts and oil/grease and other fluids. (See the following tables of consumptive parts and oil/grease and other fluids.) 180 Service and warranty Consumptive Parts Drive belt Air cleaner element Fuel filter Oil filter Clutch disc, clutch parts Brush holders Brake pads Brake discs Wiper blades Light bulbs Motor brushes Fuses, etc. Oil/Grease and other fluids Engine oil Transmission oil Power steering fluid Brake fluid Coolant Grease Washer fluid Battery fluid Diesel Air conditioner refrigerant Other lubricants, etc. No warranty repair shall be made if it is found that the vehicle Identification number like chassis / engine number, odometer or the warranty & service booklet, have been tampered with. This list is neither exclusive nor exhaustive and the decision of General Motors India Pvt. Ltd. shall be final and binding. Service and warranty 181 4. WHAT THE OWNER MUST DO In order to keep this warranty valid you must: a. Use your vehicle as instructed in the Owner’s Manual. b. Have your vehicle inspected according to this schedule. The cost of the service is borne by the owner. If the services are not performed within the specified time limits, the general and the rust through warranty as referred to under Clause 2 above, shall be rendered null and void and shall not be reinstated by a subsequent service. c. Keep the warranty & service booklet (Owner’s Manual) and all receipts in a safe place to present to the CHEVROLET retailer at regular maintenance visits and when repair work is required. 5. PARTS COVERED BY OTHER WARRANTY CONDITION a. Battery : The coverage period is 1 year from the date of new vehicle registration regardless of the distance traveled. b. Tyres : This warranty is covered by the tyre manufacturer. The coverage period is one year. Please check with your CHEVROLET retailer for details. c. Audio/Radio/Acc. : This warranty is covered by the audio/radio/Acc. manufacturer. The coverage period is one year. Please check with your CHEVROLET retailer for details. 6. MAKING THE WARRANTY EFFECTIVE The warranty goes into effect after CHEVROLET authorized retailer fills in the appropriate information about your vehicle and places the retailer's official seal and signature in the warranty & service booklet (Owner’s Manual). 7. REQUIREMENTS FOR WARRANTY WORK To have warranty work carried out, present the warranty & service booklet (Owner's Manual) to the authorized CHEVROLET retailer as mentioned in this booklet. If the warranty & service booklet is lost or incomplete, work to be carried out with respect to the standard warranty shall be refused. 182 Service and warranty 8. CHANGE OF OWNERSHIP If the vehicle is sold during the warranty period, please deliver the warranty & service booklet (Owner's Manual) to the new owner. The new owner will need to complete the change of address or subsequent ownership notification card located elsewhere in this booklet in order for the coverage to be transferred. 9. EXPENSES ASSOCIATED WITH WARRANTY WORK The expenses of repair work and parts of your CHEVROLET vehicle will be covered by CHEVROLET standard limited warranty in accordance with the WARRANTY & SERVICE BOOKLET (OWNER’S MANUAL). Other expenses that are not covered by the CHEVROLET Standard Limited Warranty must be covered by the owner. 10. General Motors India Private Limited is launching the Chevrolet Cruze in different cities in a phased manner. The CHEVROLET retailer responsible for delivering your Cruze is qualified to provide all Cruze related services within the city where he is located. As other CHEVROLET retailers become operational to handle the Cruze, they will also be able to provide similar Cruze related services. IN ORDER FOR THE WARRANTY ON YOUR VEHICLE TO APPLY, IT IS IMPERATIVE THAT YOUR CRUZE BE SERVICED, HANDLED AND ATTENDED TO ONLY BY CHEVROLET RETAILER AS SET FORTH IN THIS BOOKLET. 11. The following requisite document should be presented to the CHEVROLET retailer at the time of making a claim under New Vehicle Warranty: • Original invoice issued by CHEVROLET retailer. • Warranty and service booklet / maintenance record. • Any other document deemed to be necessary by CHEVROLET retailer and/or General Motors India. Service and warranty 183 PREDELIVERY INSPECTION AND VEHICLE DELIVERY Before delivering the vehicle we carried out a thorough predelivery inspection in order to ensure that your Chevrolet vehicle is in a fault-free condition. Accompanying this appropriately filled out service booklet (Owner's Manual) are the tool kit and your vehicle documents. You have been informed of the service intervals and necessary service checks, including under extreme operating conditions and in particular with regard to oil changing of diesel engines. City, date : CHEVROLET Retailer’s / ASO’s Stamp and Signature 184 Service and warranty Service and warranty 185 OWNER’S STATEMENT OF ACCEPTANCE I hereby certify that the vehicle has been delivered in an orderly and proper operating condition, including Keys, Service booklet (Owner's Manual) and tool kit. I have read and understood the terms and conditions pertaining to the New Vehicle Warranty and agree to abide by the same. I have been informed of the service intervals and necessary service checks, including under extreme operating conditions. Date of delivery : City, date : Name and signature of customer : This sheet must be detached prior to vehicle delivery and placed with the vehicle file after it has been signed by the customer. 186 Service and warranty Service and warranty 187 1000 kms /30 days reassurance check-up (whichever is earlier) Dear Customer, VIN no. __________________________________________ PDI no. __________________________________________ We are confident that you and your family would be enjoying the safe and comfortable drive of the Chevrolet Cruze. We would like to undertake a thorough check-up of the vehicle at 1000 kms or 30 days, whichever occurs earlier. This will also allow us to re-emphasize the salient features of the Cruze to you. Date of service_____________________________________ Date of delivery____________________________________ Retailer code ______________________________________ Customer’s name___________________________________ Customer’s tel. no. _________________________________ I confirm that the vehicle has been inspected and delivered to my satisfaction. In the unlikely event of an emergency assistance, please call your nearest CHEVROLET retailer as mentioned in this booklet or please feel free to call our 24 hr. helpline at 1800 3000 8080. Retailer's Signature Customer’s Signature 188 Service and warranty 1000 kms Reassurance check-up General Status review Check closing efforts of doors, keyless entry system & other functions Under hood Visually check routing, leaks & damage — Check fluid levels — Engine oil level — Brake/clutch oil level — Coolant level — Power steering oil — M/T oil Windscreen washer level & add washer fluid Underbody, wheels Visually check routing, leaks & damage Check tyre pressure Electrical Checks Malfunction indicator lamp Service vehicle soon lamp Charging lamp Oil pressure lamp Parking brake lamp/indicator High beam/Turn signal Hazard indicator & all other telltale lamp Cigarette lighter/rear defogger Check lighting system Horn/Radio/Outside Mirrors High/Low beam/Hazard signal Turn signal/Flash to pass signal Front/Rear fog lamps/Tail lamps Stop lamp/Reversing lamp/Trunk lamp Dynamic Evaluation Steering function/noise/abnormal drag Clutch & gear shifting function/ noise Accelerating & braking function/ noise Check tyres Any other abnormal noise Service and warranty 189 CHEVROLET Inspection CHEVROLET Inspection 2nd Service Check 1 year / 15000 kms whichever occurs earlier 1st Service Check 6 months / 7500 kms whichever occurs earlier VIN ______________________________________________ VIN ______________________________________________ Regn. No. _________________________________________ Regn. No. _________________________________________ Delivery date ______________________________________ Delivery date ______________________________________ Date of service _____________________________________ Date of service _____________________________________ Kms _____________________________________________ Kms _____________________________________________ I confirm that the job has been attended to my satisfaction. I confirm that the job has been attended to my satisfaction. Customer’s Signature Customer’s Signature Labour free & Parts are chargeable (Retain with job card) Labour free & Parts are chargeable (Retain with job card) 190 Service and warranty Delivering Retailer’s stamp & date Delivering Retailer’s stamp & date I hereby certify that the work has been carried out as per the schedule. I hereby certify that the work has been carried out as per the schedule. Servicing Retailer’s / ASO stamp & date Servicing Retailer’s / ASO stamp & date Service and warranty 191 CHEVROLET Inspection CHEVROLET Inspection 4th Service Check 2 years / 30000 kms whichever occurs earlier 3rd Service Check 1.5 years/22500 kms whichever occurs earlier VIN ______________________________________________ VIN ______________________________________________ Regn. No. _________________________________________ Regn. No. _________________________________________ Delivery date ______________________________________ Delivery date ______________________________________ Date of service _____________________________________ Date of service _____________________________________ Kms _____________________________________________ Kms _____________________________________________ I confirm that the job has been attended to my satisfaction. I confirm that the job has been attended to my satisfaction. Customer’s Signature Customer’s Signature Labour & Parts are chargeable (Retain with job card) Labour & Parts are chargeable (Retain with job card) 192 Service and warranty Delivering Retailer’s stamp & date Delivering Retailer’s stamp & date I hereby certify that the work has been carried out as per the schedule. I hereby certify that the work has been carried out as per the schedule. Servicing Retailer’s / ASO stamp & date Servicing Retailer’s / ASO stamp & date Service and warranty 193 MAINTENANCE RECORD SHEET (Repair category - Free Service/Paid Service/Running Repair/Acc. Repair) Repair Date R.O. No. Kms. Repair Category Details of Repair Done Name of Servicing Retailer Service Adv. Sign. Retailer Stamp 194 Service and warranty MAINTENANCE RECORD SHEET (Repair category - Free Service/Paid Service/Running Repair/Acc. Repair) Repair Date R.O. No. Kms. Repair Category Details of Repair Done Name of Servicing Retailer Service Adv. Sign. Retailer Stamp Service and warranty 195 BATTERY n Defects arising out of faulty vehicle electrical systems, negligent maintenance, incorrect charging or improper filling of the battery by unauthorized dealers/auto electricians are not covered by warranty. Battery make : n Consequent liabilities are not covered by this warranty policy. Battery number : n Get battery checked every 3 months. Battery type : Important Instructions n The battery must be fitted firmly in the cradle. n Connecting cables and connectors must be fastened securely on to the battery. n Connections must be made in the right polarity. n Terminals must be kept coated with petroleum jelly/vaseline. DO NOT USE GREASE. n Battery top & vent plugs must always be kept clean & dry . n Electrolyte level must always be maintained in line with the bottom of the vent hole. In case of any drop in electrolyte level, add pure distilled water. NEVER ADD ACID. n Battery is warranted for a period of one year only. n Liability under this warranty is limited to defects arising out of faulty material or workmanship developing under proper use and NOT when the battery is merely discharged. CHEVROLET retailer’s Stamp 196 Service and warranty SEPARATE CORROSION PROTECTION SERVICE Body/ Underbody Corrosion Protection Service General Motors India provides a three (3) years or 1,00,000kms (whichever is earlier) warranty vehicle that no rust-through of the body/underbody will occur, provided that the directives from General Motors India Pvt. Ltd. concerning the treatment, maintenance, and care of the vehicle (Owner’s Manual) and especially the inspection and checks prescribed in the service booklet have been carried out. Furthermore, the body paintwork and the corrosion protection must be visually inspected for damage as part of the regular annual inspection or 15,000 kms service. The customer is informed of any damage detected and measures to rectify this damage. Any damage discovered is also indicated in the following corrosion protection diagram. Confirmation of the inspection is indicated by a stamp and dated signature, accompanied by indication of the vehicle mileage on the following verification documents. Make use of this possibility in order to avoid problems during warranty claims regarding rust- through of the body / underbody. The rust through warranty is not applicable if areas damaged by any reason remain unattended and become the cause of corrosion. All repairs when required should be carried out promptly and by the CHEVROLET retailer. Service and warranty 197 BODY INSPECTION RECORD Vehicle identification number In order to maintain the General Motors India Pvt. Ltd. rust-through warranty, the vehicle must be subjected to an inspection by CHEVROLET retailer once a year. Any resulting work is subject to a charge. Registration number Check-up 1st year after initial registration. Name / address of owner Check-up date Odometer reading Damage found 1. Outer body Yes No 2. Under body Yes No 3. Engine compartment Yes No Retailer stamp / signature Damage repaired Remarks : Yes No 198 Service and warranty BODY INSPECTION RECORD Vehicle identification number In order to maintain the General Motors India Pvt. Ltd. rust-through warranty, the vehicle must be subjected to an inspection by CHEVROLET retailer once a year. Any resulting work is subject to a charge. Registration number Check-up 2nd year after initial registration. Name / address of owner Check-up date Odometer reading Damage found 1. Outer body Yes No 2. Under body Yes No 3. Engine compartment Yes No Retailer stamp / signature Damage repaired Remarks : Yes No Service and warranty 199 EMISSION WARRANTY (Applicable in NCR Delhi, Chennai, Kolkata and Mumbai) Subject to other terms of the warranty policy and the conditions and obligations laid down hereunder, General Motors India Pvt. Ltd., hereafter called General Motors India Pvt. Ltd., certifies that the components liable to affect the emission of the gaseous pollutants in the vehicle in the normal use despite the use to which it may be subjected, comply with the provisions of Rule 115 (2) of the central Motor Vehicle Rules, 1989,and further warrants that if on examination by a service center duly authorized by the General Motors India Pvt. Ltd., the vehicle is discovered to be failing to meet the emission standard as specified in the said rule, our authorized service center shall take such corrective measures as may be necessary and shall at its sole discretion either repair or replace free of charge such components of emission control system as are specified in Annexure II hereof. The definitions of various terms used in Emission warranty proposal are given in Annexure –I. These definitions shall be in line with the definition of the existing product Warranty definition. Conditions : 1. This warranty will be in addition to and will run concurrently and parallel to the product warranty and will apply only in respect to components as mentioned in Annexure-II. 2. The period of the vehicle’s warranty shall commence from the date of the vehicle sale. 2.1 Warranty period - 1,00,000 kms or 3 years whichever occurs earlier, from date of the vehicle sale. 3. The warranty claim will be accepted only after examination carried out by CHEVROLET retailers leading to a firm conclusion that none of the original settings /specifications have been tampered with and that the components (s) as mentioned in Annexure –II has/have a manufacturing defect, and /or, that the vehicle is unable to meet the In-use emis- sion standards. 4. The methods of examination to determine the warrantable condition of the components will be at sole discretion of General Motors India Pvt. Ltd. and or its retailers and results of such examination will be final and binding. If, on examination, the warrantable condition is not established, General Motors India Pvt. Ltd. will have the right to charge full, or part, of the cost of such examination and resulting repairs /rectification. 5. In case of acceptance of the warranty under Emission Warranty, General Motors India Pvt. Ltd. will replace, at retailers, free of charge, the components which are covered as mentioned in Annexure-II, but the consumables as mentioned in OM shall be charged as per actual applicable rates. 6. In case of a vehicle in which the components covered under Emission Warranty or the associated parts, are 200 Service and warranty not independently replaceable, on account of their being integral parts of a complete assembly, General Motors India Pvt. Ltd. will have the sole discretion to replace either the entire assembly or by using some of the parts of the system through suitable repairs or modifications. 9. General Motors India Pvt. Ltd. will not be responsible for the cost of transportation of the vehicle to the nearest retailer or any loss due to non-availability of the vehicle during the period of a warranty claim and examination by CHEVROLET retailers. 7. Any consequential repairs or replacement of parts which may be found necessary to establish compliance to In-use emission standards, in addition to the replacement of the components covered under Emission Warranty, will not be made free of cost unless such parts are also found to be in a warrantable condition within the scope and limit of the product Warranty (Chevrolet Cruze 3 years/1,00,000 kms, whichever is earlier). The consumables and labour shall be charged per actual during such repairs or replacement of parts. 10. General Motors India Pvt. Ltd. will not be responsible for any fines, penalties that may be charged by Statutory or Regulatory authorities on account of failure of the vehicle to comply with the in-use emission standards on the vehicle not meeting any such given legal/ regulatory requirement, during inspection by such authorities. 8. All the parts removed for replacement under warranty will be the property of General Motors India Pvt. Ltd. 11. Emission Warranty will be applicable irrespective of the change of ownership of the vehicle provided all the conditions as laid down in this document are met from the date of original sale of the vehicle. This Emission Warranty will be applicable only if the customer : (i) Observes all the important instructions and any other precautions listed in the OM for use of the vehicle. (ii) Under all circumstances uses lubricants and fuel as recommended by General Motors India Pvt. Ltd. (iii)Regularly obtains and carries out maintenance at CHEVROLET retailers as per the list in this booklet only, in accordance with General Motors India Pvt. Ltd. guidelines and enters the details in the Service Booklet. (iv)Immediately approaches the nearest Authorized Service Center as per the list in this booklet upon discovery of failure to comply with the Inuse emission standard inspite of having maintained and used the vehicle in accordance with the instructions in the OM and having carried out such repairs and adjust- Service and warranty 201 ments as may be required with a view to establish such compliance. Conditions under which warranty is NOT applicable: (v) Produces the ‘Pollution Under Control (PUC)’ certificate valid for the period immediately preceding the test during which the failure is discovered, the test having been carried out either for obtaining a new certificate, or pursuant upon being directed by an officer as referred to in sub – rule (2) of Rule 116 of the Central Motor Vehicles Rules. 1. Non production/availability of a valid ‘Pollution under Control’ certificates as described in customer obligation (V). 2. In case the vehicle is not serviced by CHEVROLET retailers as per the list in this booklet as per the service schedule described in the maintenance chart given in the Owner’s Manual. (vi) Produces the service booklet (Owner’s Manual) and all relevant bills for verification of details. 3. A vehicle, which has been subjected to abnormal use, abuses, neglect and improper maintenance or has met with an accident. (vii) Produces receipts covering maintenance of the vehicle as specified in the OM from the date of original purchase of the vehicle. 4. Use of such replacement parts, which are not specified and approved by General Motors India Pvt. Ltd. (viii)Produces valid certificate of insurance & RTO registration. 5. If the vehicle or parts thereof, have been altered, tampered with or modified or replaced in an unauthorized manner. 6. A vehicle on which the odometer is not functioning or the odometer has been changed or the reading of which has been changed / tampered with so that the actual mileage cannot be readily determined. 7. A vehicle, which has been used, for competitions, races, rallies or for the purpose of establishing records. 8. Examination by CHEVROLET retailers as per the list in this booklet of the vehicle shows that any of the conditions stipulated in the OM with regard to use and maintenance have been violated. 9. A vehicle, which has been run on adulterated fuel or lubricant or fuels lubricants other than those, specified by GMI. Scope and Limits: 1. This emission warranty is in addition to the product warranty for the vehicle as per the scope and limit described in the OM and all conditions described therein will apply, in addition to those exclusively stipulated in this warranty. 202 Service and warranty 2. The emission warranty covers only compliance with the emission standard as specified in sub rule (2) of Rule 115 of CMVR. It does not cover any other performance of these parts or routine test and consequent maintenance or adjustments to establish compliance to the in-use emission standard as applicable to the state, in which the vehicle is registered and is in use. Service and warranty 203 ANNEXURE-I Definitions: 1. Vehicle : The Motor Vehicle approved for sale within India under the provisions of Central Motor Vehicle Rules, 1989 or any subsequent amendment or substitution thereof. 2. Owner’s Manual (OM) : A document given to the customer at the time of sale of the vehicle giving guidelines on use and maintenance of the vehicle including the terms and conditions of Warranty. 3. Maintenance : Maintenance as per the schedule provided in the Owner’s Manual by General Motors India Pvt. Ltd. including inspection, verification check, adjustment and replacement, if necessary. 4. Service Booklet : The scheduled service record book in Owner’s Manual, which is required to be filled by CHEVROLET retailer at the time of service. 5. Abnormal Use : The situations when the vehicle is put to use other than that intended by General Motors India Pvt. Ltd. such as racing, overloading or use of adulterated fuel or fuel not recommended by General Motors India Pvt. Ltd. 6. Manufacturing Defect : Means deficiency or deviation from normal production tolerance in design, material, or workmanship in a device or system which affects any parameter, performance, or component belonging to emission control system. 7. Product Warranty : The manufacturer warranty as provided by General Motors India Pvt. Ltd., which covers failure of various parts and systems as per the Owner’s Manual 3 years/1,00,000 kms, whichever is earlier. 8. Emission Warranty : Warranty for emission performance of the vehicle as determined by sub-rule (2) of rule no 115 of the Central Motor Vehicles Rules, 1989. 9. Authorized Service Centers : Any service facilities authorized by General Motors India Pvt. Ltd. to perform warranty repairs. This shall include all of CHEVROLET retailers that are recognised for service of subject vehicles or any other service center duly authorized by General Motors India Pvt. Ltd. 10. Warrantable Condition : Warrantable condition means any condition of a vehicle, which triggers the responsibility of General Motors India Pvt. Ltd. to take corrective action within the framework of emission Warranty. This however shall not include any statutory or regulatory fines or penalties. 11. Warranted Parts : Those components, listed as per Annexure–II. 204 Service and warranty ANNEXURE-II List of Components Covered under Emission Warranty S. No. Part name 1 Catalytic Converter*** 2 Exhaust manifold gasket 3 Electronic Control Module 4 Manifold Absolute Pressure Sensor 5 Mass Air Flow Sensor 6 Accelerator Pedal Position Sensor 7 Air Temp. Sensor 8 Exhaust Temperature Sensor 9 Coolant Temperature Sensor 10 Injectors 11 Fuel Pressure Regulator Valve 12 Exhaust Gas Re-circulation Valve 13 Fuel Pump 14 High Pressure Pump *** Catalytic Converter is covered only for emission related failures as provided under the warranty statement. Replacements if any shall not be applicable for breakage and noise problems. Note : All the above mentioned parts are covered only if the car fails to meet the prescribed Emission norms. Any other performance problems shall be treated as not relevant to the Emission warranty. Service network 205 SERVICE NETWORK CHEVROLET SALES INDIA SALES AND SERVICE NETWORK North zone..................................... 206 West zone ..................................... 212 South zone .................................... 217 East zone ...................................... 223 International ................................. 226 L m Indicates Retailer (Sales and Service) Indicates Chevrolet Authorized Service Center Authorized Service Center (ASC) are authorized to carry out Periodic Maintenance (Free/Paid, Minor Running Repair) Only. The list of authorized Retailers / ASC are mentioned herein as of January, 2014. For any change in authorized Retailers /ASC, please visit www.chevrolet.co.in. 206 Service network NORTH ZONE L STATE - DELHI L L Auto Vikas Sales & Service Pvt. Ltd. Workshop : 12-A, Shivaji Marg, Najafgarh Road, New Delhi - 110015 Tel. : 011 - 42070707, 42070788 Fax : 011 - 25451004, 42070735 Showroom 2 : A-2/6, Safdarganj Enclave, Africa Avenue, New Delhi - 110 029 Tel. : 011 - 46146666 / 75 L Arya Automobiles Showroom : Plot No. 193, Metro Pillar No. 543, Main Rohtak Road, Mundka, New Delhi - 110041 Tel. : 011 - 8743030301 / 302 Fax : 011 - 28342887 L L AMBALA Ambala Automobiles India Ltd. Showroom : Ramgarh, Near Central Jail Bridge, Chandigarh Road, Baldev Nagar, Ambala City - 134 003 Tel. : 0171 - 2543010 Fax : 0171 - 2543510 Workshop : Barwala, Naraingarh Road, Ambala City - 134 003 Tel.: 0171 - 2678013 L BHIWANI Shailesh Automobiles Showroom & Workshop : Rohtak Road, Bhiwani - 127021 Tel. : 01664 -204006/008 DADRI Shailesh Automobiles Showroom & Workshop : Near Loharu Chowk, Bhiwani Road, Dadri - 127 306 Tel. : 9253660069/70 FARIDABAD Regent Automobiles Ltd. Showroom : 14/3 , Mathura Road, Faridabad - 121 003, Haryana Tel. : 0129 - 4088530 / 31 Fax : 0129 - 2252304 Workshop 1 : 14/5, Main Mathura Road, Faridabad - 121 003 Tel. : 0129 - 2252151 - 55, 4261200 Workshop 2 : Plot No.57, Sector-27C, Opp. Crown Interiorz Mall, 13/1, Mathura Road, Faridabad - 121 003 Tel.: 0129 - 2577777 L STATE - HARYANA Globus Motocorp Pvt. Ltd. Showroom : ZB-43 & 44/487, Zulphe Bengal, Main GT Road, Dilshad Garden, Delhi - 110095 Tel. : 011 - 43355555 Workshop : B-31, Jhilmil Industrial Area, Behind Jhilmil Metro Station, New Delhi - 110095 Tel. : 011 - 43388888 L Triumph Motors Showroom : A-9/3 Wazirpur Industrial Area, Near Richi Rich, New Delhi - 110052 Tel. : 011 - 47444666 Fax : 011 - 42475584 Workshop 2 : G-14, Udyog Nagar, Rohtak Road, Peeragarhi, Delhi-110041 Tel. : 011 - 42010101 Fax : 011 - 42010132 Go Auto Pvt. Ltd. Showroom : A 231, Okhla Industrial Area, Phase-1, New Delhi - 110020 Tel. : 011 - 41855500, 9015444555 Workshop : B-25, Okhla Industrial Area, Phase-1, New Delhi - 110020 Tel. : 011 - 41955500, 9015777888 L Workshop 1: C-13, Plot No. 65, SMA Industrial Area, GTK Road, Opp. Jahangir Puri, Azadpur, New Delhi - 110 033 Tel. : 011 - 47444777 Workshop : KH-82/21/2 &22/2, Phirni Road, Udyog Nagar Industrial Area, Near Mundka Metro Pillar No.547, New Delhi - 110 041 Tel. : 011 - 28342884 L Metro Motors Pvt. Ltd. Showroom & Workshop : Bawa Potteries Industrial Complex, Aruna Asaf Ali Marg, Vasant Kunj - 110 070 Tel. : 011 - 41761717, 46156666 GURGAON Bhanu Motors Pvt. Ltd. Showroom: Shop No. 4, Omaxe Wedding Mall, Main Sohna Road, Near Subhash Chowk, Gurgaon - 122001 Tel. : 0124 - 4757777 Workshop: Plot No. 541, Sector-37, Part-II, Gurgaon - 122001 Tel. : 0124 - 4598888 L Gentech Toolings Pvt. Ltd. Showroom & Workshop : Plot No. 66, IDC, Opp. Sector - 14 Mehrauli - Gurgaon Road, Gurgaon - 122 001 Tel. : 0124 - 4638751 - 54, 4368787 Fax : 0124 - 4638700 m Orix Auto Infrastructure Services Ltd. Workshop : 7B, Sector - 18, Maruti Industrial Area, Gurgaon - 122 015 Tel. : 0124 - 3014700 / 701 / 719 Fax : 0124 - 3014702 Service network 207 L L L L L L L YAMUNA NAGAR Oberoi Automobiles Showroom & Workshop : Aggarsain Chowk, Near Gupta Palace, Jagadhri - 135 003 Tel. : 01732 - 212030, 212010 KURUKSHETRA VPS Speciality Papers Showroom & Workshop : Plot No.145 &146, Industrial Area, Sector 2, Kurukshetra - 136 118 Telefax : 01744 - 231050 HISSAR Ashwani Automotors Showroom & Workshop : 9 km Stone, OP Jindal Marg, Hissar - 125 044 Tel. : 01662 - 220710 / 11 / 12 JHAJJAR Shailesh Automobiles Showroom & Workshop : Tehsil Road Jhajjar, Haryana - 124 001 Tel. : 9253660066 / 9254171300 JIND Lekh Raj Motors Pvt. Ltd Showroom & Workshop: Safidon Road, opp. Brahmin Dharamsala, Jind. Tel. : 9992900082 KAITHAL Lekh Raj Motors Pvt. Ltd. Showroom & Workshop : Ambala Road, Kaithal, Haryana - 136027 Tel. : 0174 - 6226827 KARNAL Aryaman Automobiles Showroom & Workshop : 117/6, K.M. Milestone, Near Hotel New World, G. T. Road, Karnal - 132 001 Tel. : 0184 - 2220011, 2220325 TeleFax : 0184 - 2220025 L L L L L PANIPAT Aryaman Motors Showroom & Workshop : Plot No 64, Sector -25, Huda Industrial Area Phase 1, Panipat - 132103 Tel. : 0180 - 2666222 / 2666800 ROHTAK Badhwar Automobiles Pvt. Ltd. Showroom & Workshop : Sonepat Road, Rohtak - 124 001 Telefax : 01262 - 256666 REWARI Vardhman Automobiles Pvt. Ltd. Showroom & Workshop : Opp. Gurudwara, Jhajhar Road, Rewari - 123 401 Tel. : 01274 - 250440 / 251188 Fax : 01274 - 255966 SONIPAT Malwa Motors Sales Pvt. Ltd. Showroom & Workshop : NH-1, 31 Km Stone, G.T. Road, Kundli, Sonipat - 131 001, Haryana Tel. : 0130 - 2219384 - 85, 2370386, 2371386 Fax : 0130 - 2219384 SIRSA Padam Motors Pvt. Ltd. Showroom & Workshop : Hisar Road, Opp Traffic Police Post, Sirsa - 125055 Tel. : 01666 - 244445 Fax : 01666 - 244442 L L L L L KANGRA Himachal Autowheels Pvt. Ltd. (Platinum Chevrolet) Showroom & Workshop : N.H 20 Kachhiary, Kangra - 176001 Tel. : 01892 - 260600/260601 MANDI Ram Hari Motors Pvt. Ltd. Showroom & Workshop : Rani Ki Bain, Gutkar, Mandi - 175 021 Tel. : 01905 - 225692 Fax : 01905 - 221691 SIMLA Rajvir Motors Showroom & Workshop : Byepass Road, Parasdass Garden, Simla - 171 001 Tel. : 0177 - 2674284 - 6 Fax : 0177 - 2674287 SOLAN Rajvir Motors Showroom & Workshop : Kalka Shimla Road, Near Mehta Market, Kumarhatti, Solan, Himachal Pradesh - 173 229 Telefax : 01792 - 266338 UNA Bhagat Ram Motorways Pvt. Ltd. Showroom & Workshop : Una Nangal Road, Rakkar Colony, Una - 174 303 Tel. : 01975 - 238799 Fax : 01975 - 238699 STATE - PUNJAB L STATE - HIMACHAL PRADESH L MANALI Ram Hari Motors Pvt. Ltd. Showroom & Workshop : Rotang Road, Village Vishisht Vihal, PO Vashisht, Tehsil - Manali, Distt - Kullu, Manali - 175131 Tel. : 01902 - 254001 AMRITSAR S V Motors Showroom : Near Amritsar Gate, GT Road, Amritsar - 143001 Tel. : 0183 - 2700102 Fax : 0183 - 2700101 Workshop : Main GT Road, Opp. ITBP Office, Amritsar - 143001 Tel. : 0183 - 2700201 L BATALA Kashmir Autmobiles Pvt. Ltd. (Platinum Chevrolet) Showroom & Workshop: Opp. Cambridge International School, Saidmubarak, Amritsar Road, Batala - 143505 Tel.: 01871 - 241024 208 Service network L L L BHATINDA Padam Cars Pvt. Ltd. Showroom & Workshop : Goniana Road, 8th Mile Stone, NH-10, Bhatinda - 151 005 Tel. : 0164 - 27601111 / 9216350205 Telefax : 0164 - 2760153 CHANDIGARH RSA Motors Pvt. Ltd. Showroom: Plot No.5, Industrial Area, Phase-I, Chandigarh - 160 002 Tel. : 0172 – 5033333,9914110606 Fax. : 0172 - 5033338 L Work Shop: Plot No. 2, Industrial Area, Phase-I, Chandigarh – 160 002 Tel. : 0172 – 5039999,5041233,9814106962 Fax. : 0172 - 5039939 L Padam Motors Pvt. Ltd. Showroom: 182/2, Industrial Area, Phase 1, Chandigarh - 160002 Tel. : 0172 - 5212900 L Workshop : 185, Industrial Area, Phase 1, Chandigarh -160002 Tel. : 0172 - 5212999 L L L HOSHIARPUR Bedi Automobiles Showroom & Workshop : Piplawala, Jalandhar Road, Hoshiarpur - 146 022 Tel. : 01882 - 329696 Fax : 01882 - 253763 Omni Wheels Pvt. Ltd. Showroom & Workshop : Plot No 73, New Kuldeep Nagar, Basti Jodhewal Chowk, Ludhiana - 141 007 Tel. : 0161 - 5055900 Fax : 0161 - 5055911 L L L L L NAWASHAHAR Aakriti World Showroom & Workshop : Chandigarh Road, Nawashahar, Punjab - 144 514 Tel. : 01823 - 285656 Telefax : 01823 - 285858 PATIALA Padam Cars Pvt. Ltd. Showroom & Workshop : Main Patiala - Rajpura Road, Opp. Caspa Resort, Bahadurgarh, Patiala - 147 001 Tel. : 0175 - 2663813 - 14, 9217100905 - 9 Fax : 0175 - 2663828 PATHANKOT Kashmir Automobiles Pvt. Ltd. Showroom & Workshop : Simbel Chowk, Dalhousie Road, Pathankot - 145 001 Tel. : 0186 - 2257022 - 24 AJMER Rajdeep Autowheels (P) Ltd. Showroom : 12-15, ASC Road, Vaishali Nagar, Ajmer - 305001 Tel. : 0145 - 2628989 / 2625116 Workshop : Khasara No-319 Kankarda Bhunaboy, NH-8, Jaipur Road, Ajmer - 305001 Tel. : 0145 - 2788192 / 93 / 2788222 / 23 ROPAR Padam Cars Pvt. Ltd. Showroom & Workshop : Chandigarh Road, Nangal Chowk, Ropar - 140 001 Telefax : 01881 - 500099 MOGA Padam Cars Pvt. Ltd. Showroom & Workshop : Near Majestic Resorts, Ferozepur Road, Moga - 142 001 Tel. : 01636 - 225755 SANGRUR Padam Cars Pvt. Ltd. Showroom & Workshop : College Road, Opp. Kamal Palace, Sangrur - 148001 Tel. : 9216350134, 9216911461 STATE - RAJASTHAN L JALANDHAR Aakriti World Showroom : Ground Floor, Vasal Tower, Police Lines, Opp. President Hotel, Jalandhar - 144001 Telefax : 0181 - 5003333 Workshop : 1746 Ladowali Road, Near BSF Chowk, Jalandhar - 144001 Tel. : 0181 - 5057777 LUDHIANA Padam Cars Pvt. Ltd. Showroom & Workshop : Khasra No. 279/3, G.T. Road, Dhandari Kalan, Ludhiana Tel. : 0161 - 2510014 Telefax : 0161 - 2510015 L L L ALWAR Triumph Motors Showroom & Workshop : Old Delhi Road, Near Jhankar Hotel, Alwar - 301 001 Telefax : 0144 - 3047571 - 78 BHILWARA Rajdeep Autowheels (P) Ltd. Showroom & Workshop : Payal Resort, Ajmer Road, Bhilwara - 311001 Tel. : 01482 - 265164 BIKANER Sunehri Cars Showroom & Workshop : Plot No. 15, Transport Nagar, NH-15, Ganganagar Road, Bikaner - 334 001 Tel. : 8003399060 / 66 / 69 BANSWARA Atharva Motors Pvt. Ltd. Workshop : Janamedi, Udaipur Road, Banswara - 327001 Tel. : 02962 - 250227 Service network 209 L CHITTORGARH Atharva Motors Pvt. Ltd. Showroom : Plot No. 86, Kabir Colony, Bhilwara Road, Chittorgarh - 312001 Tel. : 01472 - 247598 Fax : 01472 - 247598 Workshop : Near Saint Paul's School, Opp. Rajasthan State Seed Corp., Nimbhera Road, Chittorgarh - 312001 Tel. : 01472 - 240598 L L L L CHOMU Triumph Motors Showroom & Workshop : Near Radha Soami Bagh, Jaipur Road, Chomu - 303702 Tel. : 0142 - 3304000 JAIPUR Triumph Motors Showroom 1 : Corporate Tower, A-1, Jawahar Lal Marg, Jaipur - 302015 Tel. : 0141 - 4057575 Fax : 0141 - 4057500 L L Workshop 1 : G-109A, Sitapura Industrial Area, Jaipur - 302 004 Tel. : 0141 - 5122333, 5113636, 5143737, 5122797, 5122798, 5143636, 4090409 Fax : 0141 - 5122552 L Workshop 3 : E1 - 2295, Ramchandrapura Industrial Area, Sitapura Ext, Jaipur - 302022 Tel. : 0141 - 4090409 JODHPUR Atharva Motors Pvt. Ltd. Showroom : 27/27A, Light Industrial Area, Near Shastri Circle, ITI Road, Jodhpur - 342 003 Tel. : 0291 - 3048491 L L KOTA Triumph Motors Showroom & Workshop : E - 137C, Road No. 5, Indraprastha Industrial Area, Kota Tel. : 0744 - 2372333, 2372666 L ALLAHABAD Eldee Motors Showroom : Eldee Enclave, 2, S.P. Marg, Civil Lines, Allahabad-211 001 Tel. : 0532 - 2560743, 44 Workshop : Kanodia Mill Compound 1, Luker Ganj, Allahabad - 211 001 Tel. : 0532 - 2616368 L PALI Atharva Motors Pvt. Ltd. Showroom & Workshop : Opp. Krishi Mandi, Jodhpur Road, Pali - 306401 Tel. : 9414060104 L SIKAR Triumph Motors Showroom & Workshop : Near Circuit House, NH-11, Jaipur Sikar Road, Sikar - 332001 Tel. : 01572 - 245971 L SRI GANGANAGAR Sunehri Cars Showroom & Workshop : 6th Km Stone, Surat Garh Road, NH-15, Sri Ganganagar Tel. : 8003399070 / 71 UDAIPUR Atharva Motors Pvt. Ltd. Showroom & Workshop : A-83, Mewar Industrial Area, Madri, NH-8, Ahmedabad Bye Pass, Udaipur - 313 002 Tel. : 0294 - 3002730, 3002769 Fax : 0294 - 2490108 STATE - UTTAR PRADESH Workshop : E-711, Mia Bsni, IInd Phase, Behind Krishna Dharam Kanta, Jodhpur - 342 005 Tel. : 0291 - 3048217 - 22 Fax : 0291 - 3048223 Showroom 2 : C7D, Sawai Jai Singh Highway, Bani Park, Jaipur - 302016 Tel. : 0141 - 4122222 Fax : 0141 - 4122233 Workshop 2 : E-12B, Vishwakarma Ind. Area, Road No. 01, Jaipur - 302013 Tel. : 0141 - 4255555 JHUNJUNU Triumph Motors Showroom & Workshop : G1-8, 9 & H1-16,17, Phase – 2, RIICO Industrial Area, Jhunjhunu – 333001 Tel. : 01592 -203163, 250001-3, 250145, 250146 AGRA Kalyan Auto Sales Showroom & Workshop : Opp. Bhagwati Dhaba, Near New Sabji Mandi, Sikandra, Agra - 282 007 Tel. : 0562 - 2640460 / 62 / 63 Fax : 0562 - 2640461 BAREILLY VAT Motors Pvt. Ltd. Showroom & Workshop : 4.5 KM, Rampur Road, CB Ganj, Bareilly - 243 001 Tel. : 0581 - 2560741 Fax : 0581 - 2560731 FAIZABAD Megha Auto (I) Pvt. Ltd. Showroom & Workshop : Lucknow Byepass Road, Sahadatganj, Faizabad - 224 001 Tel. : 09839099210 210 Service network L GORAKHPUR United Motors Showroom : Kasia By-pass Road, Near Dr. Riyaz Ortho Hospital, Mohaddipur, Gorakhpur -273001 Tel.: 0551-2201667 Fax.: 0551-2338299 Workshop : Saryu Nahar Colony, Singharia, Gorakhpur-Deoria Road, Gorakhpur - 273008 Tel.: 0551-2270231 L L JHANSI Sri Venkateshwar Autocare Pvt. Ltd. Showroom & Workshop : Jhansi Kanpur Road, Goramachhiya, Jhansi - 284001 Tel. : 0510 - 2371144, 6450158 L LUCKNOW Megha Auto (I) Pvt. Ltd. Showroom & Workshop : 10/CP/5, Ring Road, Vikasnagar, Opp. Jagrani Hospital, Lucknow - 226 020 Tel. : 0522 - 4057999 / 4007977 / 2330180 Workshop 2: Mishipur Depot, Near Sanatan Cold Storage, Kursi Road, Lucknow - 226 026 Tel. : 0522 - 2890631 L L KANPUR Cross Road Auto Pvt. Ltd. Showroom : 40, Government Industrial Estate, Opp. Sindhi Colony, Fazal Ganj, Kanpur - 208 012 Tel.: 0512 - 2221276 / 2220043 L Workshop 1 : C-15A, Panki Industrial Area, Site-1, Kanpur - 208012 Tel.: 0512 - 2691293, 2691377 Workshop 2 : 122/236, A-1 & C-1, Fazalganj, Near Sangam Talkies, Kanpur - 208012 Tel.: 8009461111 Romi Motors Pvt. Ltd. Showroom : 14/63, Civil Lines, Kanpur - 208 001 Tel.: 0512 - 3224703 L Workshop : 120/192 (4), Lajpat Nagar, Near Mariampur Crossing, Kanpur - 208 012 Tel. : 0512 - 3224701 / 3224702 GHAZIABAD Shiva Motors Showroom & Workshop : 28/3/5, Site - IV, Industrial Area, Sahibabad, Ghaziabad Tel.: 0120 - 3008600 / 605 / 631 / 632 / 635 / 636 Fax: 0120 - 3008643 / 45 / 48 / 49 / 50 Workshop 2 : 58/3, Site 04, Sahibabad, Ghaziabad - 200300 Tel. : 0120 - 4558765 L L L Workshop : C-80/81A, Sector - 8, Noida Tel. : 0120 - 3359807 / 813 L L MATHURA Kalyan Auto Sales Showroom : NH-2, Agra-Matura Road, Mathura Tel. : 9927000967 L MEERUT Vardajyoti Automobiles Pvt. Ltd. Showroom & Workshop : Madhuban Cinema Bldg., Madhuban Colony, Baghpath Road, Meerut - 250 002 Tel. : 0121 - 2404005 - 08 Fax : 0121 - 2404009 L SAHARANPUR DPM Autosales Workshop : Ambala Road, Near Badi Nahar, Saharanpur Tel. : 0135 - 2640877 SHAHJAHANPUR VAT Motors Pvt. Ltd., Showroom & Workshop : Axis Chevrolet, 4.5 Km, Bareilly Road, Mauzampur, Shahjahanpur - 242001 Tel. : 8795030111 STATE - UTTARAKHAND MORADABAD Siggma Motors Pvt. Ltd. Showroom & Workshop : Near Radhakrishna Mandir, Delhi Road, Moradabad - 244001 Tel. : 0591-2550100-05, 7351007701-05, 7351003805 MIRZAPUR Saraswati Industries Showroom & Workshop : Pili Kothi, Station Road, Mirzapur - 231001 Tel. : 05442 - 223923 NOIDA Shiva Motors Showroom : G-24, Sector 11, Noida - 210301 Tel. : 0120 - 3920150 / 158 DEHRADUN DPM Autosales Showroom & Workshop : Mohabewala Industrial Area, Saharanpur Road, Dehradun Tel. : 0135 - 2642051 / 52 / 53 Fax : 0135 - 2642054 HALDWANI Analysis Motors Showroom : Rampur Road, Near Sushila Tewari Hospital, Haldwani - 263139, Distt. Nainital Tel.: 9258071041,9258071009 Workshop : 7.5km Stone, Gora Padav, Bareilly Road, Haldwani-263641 Tel. : 05946 - 232050 L RUDRAPUR Analysis Motors Showroom : Near Axis Bank, Nanital Road, Rudrapur - 263 153 Tel. : 9258071011 Service network 211 Workshop: Industrial Area Kiccha Bypass Road, B-27, Rudrapur - 263153 Tel:. 05944 - 243836 STATE - JAMMU & KASHMIR L L L JAMMU K. C. Motors Showroom & Workshop : NH-1, Byepass Road, Jammu - 180 004 Tel. : 0191 - 2465769 / 59, 2460829 Fax : 0191 - 2476660 RS PURA K. C. Motors Showroom & Workshop : Bagha Marh, RS Pura, Jammu Tel. : 01923 - 252809 Fax : 01923 - 252809 SRINAGAR K. C. Motors Showroom & Workshop : By Pass Road, Hyderpora, Srinagar - 190 014 Tel. : 0194 - 2443188 212 Service network WEST ZONE L STATE - GOA L VASCO-DA-GAMA Subrai Motors Pvt. Ltd. Showroom & Workshop : F L Gomes Road, Vasco-Da-Gama, Goa - 403 802 Tel. : 0832 - 2517421 / 22 Fax : 0832 - 2513924 L STATE - GUJARAT L AHMEDABAD Gallops Motors Pvt. Ltd. Showroom & Workshop : Near JCB Service Station, S.G. Highway, Sarkhej, Ahmedabad - 380 015 Tel. : 079 - 2474346, 39835544, 39835501 Fax : 079 - 39835588 Showroom 2 : A/8,9,10,11,12,13 & 14, Radhe Shopping Mall, Khokhra, Maninagar, Ahmedabad Tel. : 079 - 32941862 / 32440235 Showroom 3 : Vedas Ground Floor, Opp SBI Saijpur Branch, NH 8 Naroda, Patia Cross Road, Ahmedabad - 382325 Tel. : 079 - 22820106 L L ANAND Shree Gopinathji Agencies Workshop : Survey No. 570 - A/2, Near Indira Statue, Lambhavel Road, Anand - 388 001 Tel. : 02692 - 247979 / 247878 BHAVNAGAR V Raj Motors Showroom & Workshop : Plot No. 150, Near Press Quarter, Opp. Maruti Showroom, Bhavnagar-Rajkot Road, Chitra, Bhavnagar - 364 003 Tel. : 0218 - 2444590, 2444445 BHUJ Cargo Motors Showroom & Workshop : Plot No. 10, Survey No. 29/1, Bhuj - Mirzapur Road, Bhuj - 370001 Tel. : 02832 - 654191 / 654192 L L L GANDHIDHAM Cargo Motors Showroom & Workshop : NH-8A, Kandla Port Road, Gandhidham - 370 201 Tel. : 02833 - 654370, 653317, 9825611692 L L L GODHRA Shree Gopinathji Agencies Showroom & Workshop : Moonlight Cinema Compount, Vavdi, Godhra - 389 001 Tel. : 02672 - 645828, 265270, 265271 GANDHI NAGAR Gallops Motors Pvt. Ltd. Showroom & Workshop : Near Nigam Petrol Pump, Rajshree Cinema Road, Sector-21, Gandhinagar - 382 010 Tel. : 0232 - 30516107 HIMMATNAGAR Gallops Motors Pvt. Ltd. Showroom & Workshop : Near Motipura Circle, Opp. S.T. Workshop, Shamlaji Highway, Himmatnagar - 383 001 Tel. : 02772 - 229525, 229524, 308000, 308001 JAM NAGAR Gallops Motors Pvt. Ltd. Showroom : Jamnagar - Rajkot Highway, Hapa, Opp. Tata IB Motors, Jamnagar Tel. : 0288 - 3216060 Workshop : Jamnagar to Rajkot Highway, 8 - Happa, Jamnagar - 320 120 Tel. : 0288 - 3921194 - 98 L Workshop 2 : Opp. Amraivadi Post Office, Near Hatkeswar Circle, Maninagar, Ahmedabad - 380 026 Tel. : 079 - 30486501 / 02 / 03 L BHARUCH Shree Gopinathji Agencies Showroom & Workshop : Beside K.U & Company Petrol Pump, NH-8, Village Vadadala, Bharuch - 392 015 Tel. : 02642 - 654245, 291303, 654845 Telefax : 02642 - 231584 L MEHSANA Gallops Motors Pvt. Ltd. Showroom & Workshop : Opp. Wide Angle, Nagalpur Highway, Mehsana - 384 002 Tel. : 02762 - 241010, 302401 / 02 / 06 Fax : 02762 - 245151 NAVSARI Monarch Motors Showroom & Workshop : Mahalaxmi Estate, Near Bhana Petrol Pump, Near Grid Char Rasta, N.H. No. 8, Navsari - 396424 Tel. : 02637 - 265788 / 265599 PALANPUR Gallops Motors Pvt. Ltd. Showroom & Workshop : Survey No. 525/1, Palanpur – Delhi Highway, Near Palanpur - Deesa Char Rasta, Palanpur - 385001 RAJKOT Gallops Motors Pvt. Ltd. Showroom & Workshop : Survey No. 219/220, Opp. Parin furniture, Next to Jay Ganesh, AT & PO, Kotharia Gondal Highway, Rajkot - 360 003 Tel. : 0281 - 3205151, 2370006 / 8 / 9 / 10, 3983400, 3983407 Showroom 2: Ground Floor, Fortune Square, Jalaram Street, Near Kotecha Circle, Kotecha, Rajkot - 360001 Tel. : 9909992033 Service network 213 L L SURAT Empire Cars Pvt. Ltd. Showroom & Workshop : Plot No. 3, Near Rangoli Hotel, Rundh, Dumas Road, Surat - 395007 Tel. : 0261 - 6713300 / 33 L Nanavati Motors Showroom: Orchid Tower, Opp Intercity Township, Puna Kumbharia road, Surat-395010 Tel.: 9879114447 Workshop : Opp. SBI Bank, Puna Patiya, Puna Kumbhariya Road, Surat-395010 Tel. : 0261-6456449/429/430 Fax : 0261-2647771 L L SURENDRA NAGAR Gallops Motors Pvt. Ltd. Showroom & Workshop : Plot No. 267, GIDC Vadhvan, Opp. Market Yards, Near Rekha Bearings, Surendra Nagar Tel. : 02752 - 321542 - 43 VAPI Desai Automobiles Showroom & Workshop : At & Po : Balitha, Near Woodland Hotel, National Highway No. 8, Taluka Pardi, Vapi, Valsad - 395 015 Tel. : 0260 - 6531783, 2400250 - 51 Fax : 0260 - 2426525 L Showroom & Workshop 2 : R. S. No. 7, Opp. Atladra Railway Station, Atladra, Vadodara - 390 012 Tel. : 0265 - 2681050, 1060, 0187, 1010, 1020 Fax : 0265 - 2681050, 2354984 Monarch Cars Pvt. Ltd. Showroom: Umiya Nagar Society, Near Shree Choshath Joganiyo Mata Mandir, Udhna Magdalla Road, Surat-394210 Tel.: 0261-2720481, 2720482, 09825274707 Showroom & Workshop 3 : 3/A, Sahajanand Industrial Estate, Munjmahuda, Akota, Vadodara - 390 020 Tel. : 0265 - 2681010, 2681020, 2359898, 2334109 Fax : 0265 - 2681050, 2681060 Workshop : Next To Sameeti School, Patel Nagar Circle, Udhna Gam, Surat - 394210 Tel.: 0261-3091001 L VADODARA Shree Gopinathji Agencies Showroom & Workshop : Opp. Gujarat Elec. Board Sub Station, (Near Prakuti Resort), Chhani, Baroda - 390002 Tel. : 0265 - 2761105 / 06 Workshop : 49, United Compound, Iasudiya Mori, Dewas Naka, Indore Tel. : 0731 - 470055, 56, 57 Fax : 0731 - 470054 L STATE - MADHYA PRADESH L L BHOPAL Super Cars Ltd. Showroom & Workshop : Plot No. 21 Sector G, Govindpura Industrial Area, J.K. Road, Bhopal - 462 021 Tel. : 0755 - 4028400, 4228201 Fax : 0755 - 4228203 L L L L GWALIOR Sumedha Vehicles Pvt. Ltd. Showroom & Workshop : Opp. Jhansi Road Police Station, Jhansi Road, Gwalior - 474 009 Tel. : 0751 - 2422067, 4015789, 3291856 Fax : 0751 - 2348024 Chhabra Autolink Pvt. Ltd. Showroom : Plot no.-10 Vishnupuri Main, Near Medisquare Hospital, Indore - 452001 Tel : 0731- 4267800 Workshop : Plot no.- 11/11,11/12, Survey no.- 26, Gram Palada, Khandwa Road, Indore - 452011 Tel : 0731 - 6656000 Varenayam Motors Showroom & Workshop : 189, Angoori Bagh, Jinsi Road, Bhopal - 462008 Tel. : 0755 - 2575288 / 299 / 300 Fax : 0755 - 2579918 CHHINDWARA Sunshine Motors Showroom & Workshop : College Road, Lalbagh, Chhindwara- 480001 Tel. : 0716 - 244125, 244129, 244193 / 194 Fax : 0716 - 244126 INDORE Super Cars Ltd. Showroom : Saket Tower - 3A, Ratlam Kothi, Near Geeta Bhavan Square, AB Road, Indore - 452 001 Tel. : 0731 - 4700053, 54 Telefax : 0731 - 4700052 L L JABALPUR Oriental Motors Showroom & Workshop : 497, Karmeta, Near Padwar Kala, Katangee Bye Pass Road, Jabalpur - 482 003 Tel. : 0761 - 3250007, 3260002, 3250003, 3290001 Fax : 0761 - 4027011 KHANDWA Bedi Motors Showroom & Workshop : Gram Rehmapur, Indore Road, Khandwa - 450 001 Tel. : 0733-2244075 RATLAM Super Cars Ltd. Showroom & Workshop : Jaora Road, Near RTO Office, Ratlam - 457 001 Tel. : 07412 - 260040 SATNA Oriental Motors Showroom : Virat Nagar Colony, Pateri, Panna Road, Satna - 485 001 Tel. : 07672 - 229495 214 Service network Workshop : 27, Industrial Area Near Union Floor, Rewa Road, Satna - 485001 Tel. : 7672 -252763 L STATE - MAHARASHTRA L L L L AHMEDNAGAR Saideep Cars Pvt. Ltd. Showroom & Workshop : Survey No. 55/1B/2/1, Nagar Manmad Road, Ahmednagar - 414 111 Tel. : 0241 - 2779225 - 7 Fax : 0241 - 2779228 AKOLA Star Motors Showroom & Workshop : 9/1, Geeta Nagar Near, Alankar Petrol Pump, Akola - 444 005 Tel. : 07242800087 / 7350008428 L AMRAVATI Star Motors Showroom & Workshop : Plot No. 8, Navathe Square Bandnera Road, Amravati Tel. : 0721 - 2510199, 9921008861, 7350008426 L AURANGABAD Soham Motors Pvt. Ltd. Showroom & Workshop : Plot No. 2 & 3, N-2, Mukundwadi, Airport Road, Aurangabad - 431 003 Tel. : 0240 - 6603769, 6503769 Workshop 2 : Plot No. 28 & 29, MIDC Chikalthana, Aurangabad Tel. : 0240 - 2489411, 2474342 - 6 L L BARAMATI Mota Automotive Pvt. Ltd. Showroom & Workshop : 41 / 1 / B / 17, Nira Road, Kasba, Tehsil - Baramati, Dist - Pune - 413102 Tel. : 02112 - 222212, 220212 CHANDRAPUR ND Cars Pvt. Ltd. Showroom & Workshop : Gajanan Maharaj Mandir Square, Bapat Nagar, Nagpur Road, Chandrapur - 442401 Tel.: 07172 - 646344/22 Workshop : Ram Mandir Road, Somani Gram, Next to Central Warehouse Corporation, Oshiwara, Goregaon (West), Mumbai - 400 051 Tel. : 022 - 26765555 L AVK Automart Pvt. Ltd. Workshop : Fida Hussain Industrial Estate, Near Samrat Hotel, Pandurang Wadi Road, Mira Road (West), Mumbai - 401 104 Tel. : 022 - 28453178, 28455507, 28453564 L Nikhil Automobiles Pvt. Ltd. Showroom & Workshop 1 : A 70, TTC Industry Area, Thane Belapur Road, Kharghar, Near ICI Color Company, Khoparkaine West, Navi Mumbai - 400 709 Tel. : 022 - 27780801, 40708888 Fax : 022 - 40708899, 27780805 DHULE Jitendra Wheels Pvt. Ltd. Showroom & Workshop : P-62, Behind Hotel Manas, MIDC Avdhan, Dhule - 424 001 Tel. : 02562 - 281222 / 232 JALGAON Soham Motors Pvt. Ltd. Showroom & Workshop : 93/1, MIDC, RL Square Aurangabad Road, Jalgaon - 425003 Tel. : 0257-2211151, 2270085 Showroom 2 : 264-265, Vaswani Chambers, Opp. Old Passport Office, Pravhadevi, Mumbai - 400 025 Tel. : 022 - 434594444, 24221711-12 Fax : 022 - 24222713 KOLHAPUR Unique Automobiles Showroom & Workshop : 122/1, Pulachi Shiroli, Opp. Sangli Phata, Kolhapur - 416 122 Tel. : 0230 - 2461518 - 19 Fax : 0230 - 2461520 Workshop 2 : C/o Bharat Tiles & Marbles Ltd., Jaibhimnagar, Dharukhana Road, Reay Road (East), Near Sujala Hotel, Mumbai - 400 010 Tel. : 022 - 64560303, 23774514 / 15 / 16 Fax : 022 - 23774505 Showroom 2 : Ayodhya Park, Opp. Sangam Talkies, Kavala Naka, Kolhapur - 416 001 Tel. : 0231 - 2535315, 2535425 Fax : 0231 - 2535615 L L Workshop 3 : Plot No. D - 238 - A, TTC Industrial Area, MIDC Shiravane, Nerul, Navi Mumbai - 400 706 Tel. : 022 - 43448800 LATUR Ajinkya Cars Pvt. Ltd. Showroom & Workshop : Barshi Road, Near Bidave Engineering College, Beside Pramod Petrol Pump, Latur - 413531 Tel. : 02382 - 222600 MUMBAI Ashtavinayak Auto Pvt. Ltd. Showroom : D Mall, Off Veera Desai Road, Andheri (West), Mumbai - 400 053 Tel. : 022 - 66488888 Fax : 022 - 66488880 Workshop 4: RC 27 F - O/W/P23, Brick Bunder Sewri, Haybunder Road, Kala Chowki, Mumbai - 400033 Tel.: 022 - 64560303 L JMD VFM Cars India Pvt. Ltd. Showroom : 471 A- 1st Floor KK Square, Adjoining Solitaire Corporate Park, Near P&G Plaza Andheri (East), Mumbai - 400099 Tel : 022- 28565900/02/03 Service network 215 Workshop : Plot No. 48-A,Khairani Road, Opp. Gundecha Chambers off, Sakivihar Road, Sakinaka Andheri (East), Mumbai - 400072 Tel : 022- 28565900/01/02 Showroom & Workshop 2 : Survey No 5/4, Najhate Nagar, kalewadi Main Road, Thergaon, Pune - 411033 Tel. : 020 - 66326600, 66326632, 66326666 L L L L NASIK Jitendra Wheels Pvt. Ltd. Showroom & Workshop : B-88, Arihant Plaza, MIDC, Ambad, Next to Hotel Taj, Mumbai - Agra Highway, Nasik - 422 010 Tel. : 0253 - 2384432 / 632 / 832, 6636666, 6637777 Fax : 0253 - 2384532 L L Workshop 2 : Patel Tiles Compound, Sr.No. 42/1, Shivaji Nagar, Behind ST Bus Stand, Pune - 411005 Tel. : 020 - 32424202, 65270809, 7774010500 PUNE Platinum Chevrolet Showroom & Workshop 1 : Sr No 45/1/B/A, Shankarseth Road, Gutkewadi, Pune - 411037 Tel. : 020 - 26440029 L L Workshop : Vale, Pune Road, Solapur - 413 001 Tel. : 0217 - 2500800 L L SATARA Unique Automobiles Showroom & Workshop : 41, Mutha Colony, Sadar Bazar, Satara - 416 002 Tel. : 09623225299 SOLAPUR Gandhi Wheels Showroom : 163/1, Railway Lines, Solapur - 413 001 Telefax : 0217 - 2629400 SANGLI Unique Automobiles Showroom : 442-3, Kulkarni Complex, 100 feet road, South Sivaji Nagar, Sangli - 416 416 Tel. : 0233 - 2326544 Fax : 0233 - 2326594 YAVATMAL SARAS MOTORS Pobaru Marketing & Agencies Pvt. Ltd. Showroom : Shop No. 5,6,7,8 Udhyog Bhavan, Dharwha Road, Yavatmal - 445 001 Tel. : 07232 - 255991 Fax : 07232 - 255992 Workshop : Block No. B-16 MIDC (Lohara), Yavatmal - 445001 Tel. : 07798883816 Fax : 07232 - 255992 Workshop 1 : Reality Warehousing Pvt. Ltd., Gate No. 1337 / 1, Pune Nagar, Wagholi, Pune - 412 307 Tel. : 020 - 46609999 Tajshree Motors Pvt. Ltd. Showroom : Plot No. 1 Hindustan Colony, Wardha Road, Nagpur - 440 002 Tel. : 0712 - 2250242 / 2250243 / 2250244 NANDED Bafna Automotives Showroom & Workshop : Gut No. 235, Pimpalgaon (Mahadeo), Nanded – Akola Road, Nanded - 431 607 Tel. : 02462 - 274069 / 652099, 311102 L Showroom 2 : ICC Trade Centre, Showroom No. 4, Survey No. 403 A/2, Senepati Bapat Road, Pune - 411016 Tel. : 020 - 25666941 / 2 / 3 / 4 NAGPUR Star Motors Showroom & Workshop : 44 / 4, Wahajara, Kamptee Road, NH - 7, Nagpur - 440 026 Tel. : 0712 - 6507836/37, 6507916, 6461503 / 04 Fax : 0712 - 2632429 Workshop : Plot No. 679, Ghat Road, Near Cotton Market Square, Nagpur - 440 018 Tel. : 0712 - 2734466 / 2734467 Singh Cycle & Motor Co. Showroom 1 : S. No. 38/4, Krishna Complex, Hadapsar Bypass Road, Near Radisson Hotel, Kharadi, Pune - 411 014 Tel. : 020 - 32419385 / 32319526 Workshop : Kulkarni Complex, 100 Feet Road, Near MSEB Sub-Station, Sangli - 416 416 Tel. : 0233 - 2326544 Fax : 0233 - 2326594 THANE SC Auto Corporation Showroom: Modi House, Opp. to LIC Building, Naupada, Eastern Express Highway, Thane (West), Thane - 400 602 Tel. : 022 - 67610000 Fax : 022 - 67610209 Workshop : Pioneer Estate Corporation, 133-134, Pokhran Road No.2, Opp. Oswal Park, Thane (West) - 400601 Tel. : 022 - 66040000 Fax : 022 - 66040102 L Angel Auto World Pvt. Ltd. Showroom & Workshop 1 : Grishma garden, Gokhivare, Vasai East, Thane, Mumbai (Vasai) - 401208 Tel :0250-6453030 /6061777 Showroom & Workshop 2 : J-176, MIDC, Tarapur Road, Boisar (West) - 401505 Tel. : 02525 - 655454 / 655353 216 Service network L Nikhil Automobiles Pvt. Ltd. Showroom & Workshop : Survey No.6, Hissa No.6, Manpada Gaon, Kalyan Shill Road, Dombivali (East) - 421204. Tel. : 0251-3048888/3048899 STATE - CHATTISGARH L L BILASPUR Vardhaman Motors Showroom & Workshop : Near Uslapur Railway Crossing, Mungeli Road, Sakri, Bilaspur Tel. : 07752 - 217934 / 217935 RAIPUR Vardhaman Motors Showroom & Workshop : 9/1, Mahoba Bazar, GE Road, NH-6, Kumhari Dist. - Durg, Raipur - 492 001 Tel. : 7489177999, 7883221999 Showroom 2 : Ashoka Millenium, Ring Road, Raipur - 492 0011 Tel. : 7714030104, 7712410008 Service network 217 SOUTH ZONE L STATE - ANDAMAN & NICOBAR L PORTBLAIR Group Engineers Showroom : Prem Nagar Junction, (SY No 1394/1), Haddo Post Port Blair - 744102 Tel. : 03192 - 230301, 242901 L L L ANANTPUR Dheeraj Motors Showroom & Workshop : Survey No. 239/2C & 241/1C, Kakkapali Gram Panchayat, Opp. Sakshi News Paper Office, Anantapur - 515 001 Workshop 2 : 1-8-670, Azamabad, RTC 'X' Road, Hyderabad-500020 Tel. : 040 - 27668678 / 27668761 Fax : 040 - 27668632 Workshop 3 : Plot No. 21, Mini Industrial Estate, Hafeezpet Road, Kondapur, Hyderabad - 500049 Tel. : 040 - 31906677 BHIMAVARAM Orange Auto Pvt. Ltd. Showroom & Workshop : Door No. 2-25, # 6, Near Bharath petroleum bunk, Undi Road, Bhimavaram - 534 202 Tel. : 9052781234 / 905224678 CHITTOOR M.G. Brothers Automobiles (P) Limited Showroom & Workshop : NH 4, Near Iruvaram Check Post, Chittoor - 517 001 Tel.: 92470 00003, 9247000027 GUNTUR Fusion Motors Showroom & Workshop : Plot No. 296 & 297, Opp. Sarvani Diesel Enginnering, Autonagar Main Road, Autonagar, Guntur - 522001 Tel. : 0863 - 6454545 Showroom & Workshop 3 : A2, Balanagar Techno Craft Industrial Estate, Balanagar, Hyderabad - 500 037 Tel. : 040 - 23721111 Fax : 040 - 23729999 Showroom 3 : Plot No.3 & 4, Ravi Colony, Main Road, Kondapur, Hyderabad - 500084 Tel. : 040 - 45469999 / 89 / 79 / 69 Fax : 040 - 45469959 STATE - ANDHRA PRADESH L Showroom & Workshop 2 : 16-2-705/1/1, Malakpet, Opp. Srukrupa Market, Hyderabad - 500 036 Tel. : 040 - 66815555 Fax : 040 - 66179999 Showroom 2 : House No. 1-3-1045, Viceroy Hotel Lane, Kawadiguda Road, Hyderabad - 500 080 Tel. : 040 - 27532385 - 89 Fax : 040 - 27532384 Workshop : Opp Womens Working Hostel, Dollygunj, Port Blair, Junglighat Post, Portblair - 744103 Tel. : 03192 - 253044 / 253011 L HYDERABAD Kun Automobiles (P) Ltd. Showroom & Workshop 1 : Plot No. 74, Snehapuri Colony, Near Andhra Bank, Nagole Main Road, Nagole, Hyderabad – 500 035 Tel. : 040 - 24220013, 44886666, 44886767/700/701 Fax : 040 - 24220313 L L Workshop 4 : Plot No.37, Survey No.45,Vignan Junior College Road, Kundapur, Hyderabad - 500081 Tel. : 040 - 31906699 L KHAMMAM Fusion Motors Showroom & Workshop : Plot No. 11, Sri Sri Circle, Opp. Reliance Petrol Bunk, Rotary Nagar, Bypass Road, Khammam - 507 002 Tel.: 9247623666, 8096991122 KURNOOL Dheeraj Motors Showroom : Survey No. 133/1a & 131/1, NH-7, Near Eenadu Press Office, Kurnool - 518 004 Tel. : 08518 - 253777 Fax : 08518 - 251777 Workshop : NH-7 Road, Near APSP 2nd Battalian, Ballary Chowrasta, Kurnool - 518 004 Tel. : 8518 - 253777 Orange Auto Pvt. Ltd. Showroom 1 : 6-3-249/3, Abhinandan Towers, Road No. 1, Banjara Hills, Hyderabad - 500 034 Tel. : 040 - 66515555 Fax : 040 - 66469999 L Workshop 1 : B-45/46, Industrial Estate, Near Andhra Bank Sanatnagar, Hyderabad - 500 018 Tel. : 040 - 66265555 / 66269999 KARIMNAGAR Kun Automobiles (P) Ltd. Showroom & Workshop : M.No.8-6-128, Kothi Rampur, Hyderabad Highway Road, Karim Nagar - 505 001 Tel. : 0878 - 2276633 / 9885520022 Fax : 0878 - 2276633 NELLORE M.G. Brothers Automobiles (P) Limited Showroom: 26-2-1777, Near Ayyappa Temple, Vedayapalem Area, Nellore-524004 Tel:. 9247000000 218 Service network Workshop : Plot No. 95 & 96, Wood Complex, Near Ayyappa Temple, Nellore - 524004 Tel. : 9247000022 L L RAJAHMUNDRY Orange Auto Pvt. Ltd. Showroom & Workshop : D. No. 82-10-2, Venkateswara Nagar, Near Lalacheruvu, Near ONGC Complex, NH-5 Road, Rajahmundry - 533 103 Tel. : 0883 - 6575555 / 6580888 VISHAKHAPATNAM Orange Auto Pvt. Ltd. Showroom & Workshop : D. No.38-22-87, Varun Avenue, NH-5, Murali Nagar, NH. Birla Junction, Vishakhapatnam - 530 075 Tel.: 0891 - 2572222, 9052402345 Showroom 2 : D. No. 4-46-12, G. K. Mansiom, Pedawaltier, Vishakhapatnam - 530 017 Tel.: 0891 - 2572222, 4444 Fax: 0891 - 6645555 L L TIRUPATHI M.G. Brothers Automobiles (P) Limited Showroom: 11-46/A, Renigunta Road, Tirupathi - 517501 Tel.: 9299999970 Workshop : Plot No: 254, Auto Nagar, Near Vinayaka Temple, Renigunta Road, Tirupathi - 517506 Tel.: 9247000024 L Workshop : Opposite to Fusion Towers, 36-12-2, Near Siddartha Public School, Moghul Rajapuram, Vijayawada - 520 010 Tel. : 0866 - 6645593 / 94, 9603123777 VIJAYWADA Fusion Motors Showroom : Fusion Towers, 36-12-2, Opposite to Siddartha Public School, Moghul Rajapuram, Vijayawada - 520 010 Tel. : 0866 - 6645555 / 9603123666 Fax : 0866 - 6645592 L WARANGAL Kun Automobiles (P) Ltd. Showroom : Door No. 15-2-4-1-1 & 15-2-4, Mulugu Cross, Warangal - 506 007 Tel. : 0870 - 2421955 Fax : 0870 - 2421955 Showroom & Workshop 2 : No. 122/1, C. Shankar Reddy Layout, Kalyana Nagar, Outer Ring Road, Bangalore - 560 043 Tel. : 080 - 43430300, 43430500 Fax : 080 - 43430308, 43430517 Showroom 3 : 14, Langford Avenue, Langford Road, Bangalore - 560 025 Tel. : 080 - 4330300 Workshop : H. No. 23-6-132, Hunter Road, Opp. Citizens Club, Warangal Tel. : 0870 - 2523377 / 88 / 99 Fax : 0870 - 2523399 Showroom 4 : No. 300 A - 70, 36th Cross, 10th Main, 5th Block, Jay Nagar, Bangalore - 560 041 Tel. : 080 - 42542999 STATE - KARNATAKA L L BANGALORE Frontline Automobiles Workshop : # 36/2 - A, Pattangere Main Road, Next to R.R. Nagar RTO, Mysore Road, Bangalore - 560 059 Tel. : 080 - 28604682 / 28605550 Kropex India Ltd. Showroom & Workshop : 49/1, Singasandara, Hosur Main Road, Bangalore - 560 068 Tel. : 080 - 43574357 Fax : 080 - 43574353 Showroom 2 : #7/1, Binnamangala, 100 Feet Road, 1st Stage, Indira Nagar, Bangalore, Karnataka - 560 038 Tel. : 080 - 42019013 Fax : 080 - 42019216 Workshop 2 : Sy. No. 26, Hanumareddy Layout, Chinnapanahalli Main Road, Marathahalli Post, Bangalore - 560037 Tel. : 9663388812 Trident Automobiles Pvt. Ltd. Showroom & Workshop : SY. No, 18/1B, (Old No 18/1C), Nayanda Halli Grama, Kengeri Hobli, Bangalore - 560038 Tel. :080 - 67149191/292, 67149001 Showroom 5 : # 95/3, Doddanekundi Village, Karthik Nagar, Marathahalli, Bangalore - 560037 Tel. : 080-30651404 Workshop 3 : No. 558/1,60 ft Road, 9th Cross, HAL 2nd Stage, Old Airport Road, Behind Leela Palace, Kodihalli, Indiranagar, Bangalore - 560008 Tel. : 080 - 49155858 L K.H.T. Chevrolet (A Division Of Morzaria Real Tech Private Limited) Showroom : No: 725, West of Cord Road, Rajajinagar, 1st Stage, Mahalakshmi Layout, Bangalore - 560 086 Tel. : 080 - 49363636 Workshop : No. 305, 5th Main Road, 2nd Cross, 4th Phase, Peenya Industrial Area, Bangalore - 560 058 Tel. : 080 - 49353637 Service network 219 L L BELGAUM Bellad Enterprises Pvt. Ltd. Showroom & Workshop : Shri Krishna Weaving Mill Compound, Venguaral Road, Vijaya Nagar, Belgaum - 591 108 Tel. : 0831 - 2449556 / 557, 6514911 Fax : 0831 - 2472209 BELLARY Bellad Enterprises Pvt. Ltd. Showroom & Workshop : Near Bellary Rolling Mills, Anantpur Road, Bellary - 583 101 Tel. : 08392 - 261234 / 5 Fax : 08392 - 261235 L L L DAVANGERE Modi Motors Showroom & Workshop : #869/1-2, PB Road, Opposite Sai International Hotel, Davangere - 577006 Tel. : 08192 - 233896 GULBARGA VKG Motor World Showroom & Workshop : Plot - 1&2, Survey No. 116/2, Behind Mahendrakar Complex, Kapnoor Humnabad Road, Gulbarga - 585104 Tel. : 08472 - 224555 Fax : 08472 - 258019 L HUBLI Bellad Enterprises Pvt. Ltd. Showroom & Workshop : Opp. NGEF, Rayapura, Dharwad, P. B. Road, Hubli-580025 Tel .: 0836 - 2218338 / 39 Telefax : 0836 - 2218337 MANGALORE Frontline Automobiles Showroom & Workshop : NH-17, Kullur, Mangalore - 575 013 Tel. : 0824 - 2453091, 2453162, 2453092 Telefax : 0824 - 2459391 MYSORE SHIMOGA Frontline Automobiles Showroom & Workshop : Shankar Mutth Road, Shimoga - 577 201 Tel. : 08182 - 229099 Fax : 08182 - 229098 L UDUPI Frontline Automobiles Showroom : Shekinah Manor, D. No. 10-47-A1, Near Laxmi Venkatesh Temple, NH-17, Ambagilu, Puttur, Santhekatte Post, Udupi - 576 105 Tel. : 0820 - 2581999 Fax : 0820 - 2583801 L Workshop : NH-17, Behind IOCL Fuel Station, Katapady, Udupi - 574 105 STATE - KERALA L L Showroom 2 : 33/2440B, Geetanjali Junction, NH Byepass Chakkaraparambu, Cochin - 682 032 Tel. : 0484 - 2343146 L L L Dyuthi Motors Pvt. Ltd. Showroom & Workshop : No. 201 / 1 & 2, Hunsur Road, Hinkal Village, Mysore -570017 Tel. : 0821 - 4240500 - 16 Fax : 0821 - 4241899 L L ALLEPPEY Geeyam Motors Pvt. Ltd. Showroom : Koorayil Annex, Opp. Bhattathiripurayidom, Near MCH Junction, Alappuzha, Alleppey - 688 001 Tel. : 0477 - 2238501 CALICUT German Motors Showroom & Workshop : 118-A, Chungam Junction, West Hill, Calicut - 673005 Tel. : 0495 - 2383680 / 81, 2383770 / 71 Fax : 0495 - 3041100, 2381909 COCHIN Geeyem Motors Pvt. Ltd. Showroom & Workshop : 11/336, NH-47 Bye Pass, Nettor P.O., Ernakulam, Cochin - 682 304 Tel. : 0484 - 2703245 - 49, 3097100, 3097101 Fax : 0484 - 2703244 L L L CHALAKKUDY Geeyem Motors Pvt. Ltd. Showroom : IX/461A, B, Panampilly College, NH-47, Potta, Chalakkudy - 680722 Tel. : 0480 - 2705125, 2705123 KANJRAPALLI Geeyem Motors Pvt. Ltd. Showroom : Near A K J M School, K K Road, Kanjirappally (Kottayam Dt.) Tel. : 0482 - 8201616 KANNUR German Motors Showroom & Workshop : BP6-14A, Valapattanam, Kannur - 670 010 Tel. : 0497 - 2774466 - 67, 3057200 Fax : 0497 - 27744666, 3057200 KASARGOD German Motors Showroom & Workshop : 15/89B, Citizen Nagar, Chengala, Kasargod - 671123 Tel. : 04994 - 302200 - 10 Fax : 04994 - 302211 KAYAKULAM Geeyam Motors Pvt. Ltd. Showroom & Workshop : NH-47, Near MSM College, Kayakulam - 690 502 Telefax : 0479 - 2446650 KODANGULUR Geeyem Motors Pvt. Ltd. Showroom : XII/ 121-122, Opp. Medicare Hospital, Kottapuram PO, TKS Puram, Kodungalur - 680 667 Tel. : 0480 - 2803561 / 62 220 Service network L L KOTAYYAM Geeyam Motors Pvt. Ltd. Showroom & Workshop : Karithas Junction, Thellakom P.O., Kotayyam-686016 Tel. : 0481 - 2792203 Fax : 0481 - 2792383 KOLLAM Deedi Motors Showroom : Post Office Junction, Pallimukku, Kollam - 691 010 Tel. : 0474 - 3257777 / 2725959 Fax : 0474 - 2725900 L L Workshop : Cantonment, North Nagar, Pullikada, Kollam - 691001 Tel. : 0474 - 2750010 / 11 L L L KOTTAKKAL German Motors Showroom & Workshop : 260A, Palathara, Cherusola P.O., Kottakkal, Malappuram Tel. : 0494 - 2611666 MUVATTUPUZHA Geeyam Motors Pvt. Ltd. Showroom : Mackar Plaza, EEC Market Road, PNB Junction, Muvattupuzha - 686 673 Tel. : 0485 - 606600, 2835272 / 73 Fax : 0485 - 2832554 L L Workshop : 902/903,Opp. Mackar Plaza, EEC Market Road, PNB Junction, Muvattupuzha - 686 673 Tel. : 0485 - 2835272 / 73 Fax : 0485 - 2832554 L MUTTUM Geeyem Motors Showroom & Workshop : SY NO: 70/15, 71/10, Thai Kkattukara P.O, N H Road, Distt. Aluva, Muttum, Cochin - 683106 Tel. : 0484 - 2632193 / 94 / 95 / 96 / 97 PERINTHALMANNA German Motors Showroom & Workshop : AP-IV 664F, Opp. ITC, Tirurkad, Perinthalmanna - 679 531 Tel. : 04933 - 325060, 237000, 239878 Telefax : 04933 - 2737000 PALAKKAD Geeyam Motors Showroom & Workshop : Door No. 8/1198, NH Bypass Road, Chandra Nagar, Palakkad - 678 007 Tel. : 0491 - 2504133 Fax : 0491 - 2504143 PATHANAMTHITTA Deedi Motors Pvt. Ltd. Showroom & Workshop : Kumbazhethu Buildings, Churulicode P.O., Kozhencherry Road, Pathanamthitta - 689 645 Tel. : 0468 - 2272079, 2272080 Fax : 0468 - 2272078 L L WAYNAD German Motors Showroom / Workshop : Muttil - Post, North Kalpetta, Waynad - 673 122 Tel. : 04936 - 304200 / 202414 Fax : 04936 - 304201 STATE - PONDICHERRY L THIRUVALLA Deedi Motors Pvt. Ltd. Showroom : No. 54/2, Kurusumoottil Buildings, M C Road, Mazhuvangad, Thiruvalla - 689 101 Tel. : 0469 - 2740800 THRISSUR Geeyem Motors Pvt. Ltd. Showroom : 14/3-A1, Guruvayoor Road Puzhakkal, Ayyanthole P.O., Thrissur - 680 003 Tel. : 0487 - 2388945 - 46, 2388851 - 52 Fax : 0487 - 2388851 TRIVENDRUM Deedi Motors Pvt. Ltd. Showroom / Workshop : Erumalathopu, N.H. Bye Pass Road, Venpalvattom, Anayara P.O., Trivendrum - 695 029 Tel. : 0471 - 2556006, 3257777, 2558599, 2558499 Fax : 0471 - 2551020 PONDICHERRY Aakash Auto Pvt. Ltd. Showroom : No. 1, Sounderrajan, 100 ft. Road, Sounder Rajan Nagar, Mudaliarpet, Pondicherry - 605 004 Tel. : 0413 - 2204400 Fax : 0413 - 2204033 Workshop : No. 23, 9th Cross, Metupallyam, Industrial Estate, Pondicherry - 605 009 Tel. : 0413 - 2279900 STATE - TAMIL NADU L CHENNAI Sundaram Motors Showroom & Workshop : 180, Anna salai Road, Chennai - 600 006 Tel. : 044 - 28579203 / 28 / 32 Fax : 044 - 28579210 Workshop 2: 116/4 Mahalakshmi Nagar Extention, Numbal Village Thirverkadu Post, Chennai - 600077 Tel.: 044 - 26493020/21 Workshop : Near Boating Station, Puzhakkal Post Office, Thrissur - 680553 Tel. : 0487 - 2225100, 2225101 L KLN Motors Agencies Pvt. Ltd. Showroom 1 : Old No. 861, New No. 232, Poonamallee High Road, Kilpauk, Chennai - 600 010 Tel : 044 - 23452937 / 38 Telefax : 044 - 23452936 Service network 221 Workshop 1 : Shop No. 50, SIDCO Industrial Area, Ambattur, Chennai - 600 058 Tel. : 044 - 23452930 - 32 L Showroom & Workshop 2 : No. 8-NP, Developed Plot, Guindy Industrial Estate, Ekkattuthangal, Near Kasi Theatre, Chennai - 600097 Tel. : 044 - 23458941 / 42 L L CUDDALORE Aakash Auto Pvt. Ltd. Showroom & Workshop: RS No.155/11, Vadalur Main Road, Periamedu, Karaikadu Village, Cuddalore Taluk, Cuddalore - 607005 Tel.: 04142-297997, 7373299933, 7373599933 COIMBATORE Anamallais Agencies (P) Ltd. Showroom : 252, Mettupalayam Road, Coimbatore - 641 043 Tel. : 0422 - 2435555 / 2432999 Fax : 0422 - 2446151 L L L Pressana Automobile Showroom : No. 1987, Trichy Main Road, LCT Complex, Coimbatore - 641005 Tel. : 0422 - 4041111 Workshop : 505/1, Sowaripalayam Main Road, Ramanathapuram, Coimbatore - 641045 Tel. : 0422 - 4051111 L ERODE Pressana Automobile Showroom & Workshop : No.1, ChinnaKadu Thottam, Veerapampalayam, Dhindal P.O., Erode - 638 012 Tel. : 0424 - 2276046 / 47 Fax : 0424 - 2276048 Workshop : 276/85, Tiruchengode Main Road, Opp. Old Lakshmi Kalyana Mandapam, Namakkak - 637 001 Workshop : 2/2, 1E, Balaji Nagar, Rayakottai Road, Opp. to LUK India, Hosur - 635109 Tel. : 04344 - 291033 Workshop : 249A, Mettupalayam Bye Pass Road, Coimbatore - 641043 Tel. : 0422 - 2433444 L HOSUR Thriive Cars Showroom : 2, Rajappa Mudaliar Building, NH-7, Krishnagiri, Bangalore Byepass Road, Hosur Tel. : 04344 - 644588 L L KARUR Pressana Automobile Showroom & Workshop : No.3, Salem Byepass Road, Kulathupalayam, Karur - 635 006 Tel. : 04324 - 222301 Fax : 04324 - 222302 L MADURAI A.R.A.S. Motors (P) Ltd. Showroom : 35/1, Dindigul National Highway, Near A. R. C. Parcel Service, Villangudi, Madurai - 625018 Tel. : 0452 - 2669617, 3091917 Fax : 0452 - 2669618 L Workshop : Plot No. 64 & 68, Thiruvalavayanallur Post, National Highway No. 7, Opp Arokya Milk Processing Unit, Nagari, Madurai - 625 221 Tel. : 0452 - 2463612 / 13 / 14 L NAGERCOIL A.R.A.S. Motors (P) Ltd. Showroom & Workshop: 2/86, Tirunelveli Main road, Ozhuginasery, Nagercoil - 629 001 Tel. : 04652 - 644664 (Showroom) 04652 - 272443 (Workshop) NAMAKAL Thriive Cars Showroom : 5/58, Salem Main Road, Namakal Tel. : 04286 - 275603 L L PUDUKOTTAI Jayaraj Karz Showroom & Workshop : 5915/1, Khalif Nagar, Thirumayam Road, Pudukottai - 622 001 Tel. : 04322 - 262223 PERAMBALUR Jayaraj Karz Showroom & Workshop : No. 36, Trichy to Chennai Highway, Eraiyur, Veppanthattai, Perambalur, Tamilnadu - 621 133 Tel. : 9244222728 SALEM Thriive Cars Showroom & Workshop : 1116, Salem Chennai Highway Road, Near Holy Cross, Hr. Sec. School, Ammapet, Salem - 636 014 Tel. : 0427 - 2242603 Fax : 0427 - 2242604 TRICHY Jayaraj Karz Showroom & Workshop : Madurai Main Road, Panjapur, Trichy - 620 012 Tel. : 0431 - 2906420 / 6541207 Fax : 0431 - 2202187 THIRUNELVELLI A.R.A.S. Motors (P) Ltd. Showroom & Workshop : 1183/3, National Highway Jothipuram, Konganthanparai, Thirunelvelli - 627 007 Tel. : 0462 - 2551070, 3269638 Fax : 0462 - 2554111 TIRUPUR Anamallais Agencies Pvt. Ltd. Showroom & Workshop : 396/6, Kamaraj Road, Palladam Road, Tirupur - 641 604 Tel. : 0421 - 2918999 222 Service network L L THANJAVUR Jayaraj Karz Showroom & Workshop : Pudukottai Bye - Pass Road, Thanjavur Tel. : 04362 - 226452 VELLORE Sayar Cars Showroom & Workshop : S.F. No. 3004, New By Pass Road, Near Collectorate, Vellore - 632004 Tel.: 0416 - 2222017 Service network 223 EAST ZONE L STATE - ARUNACHHAL PRADESH L ITANAGAR Sango Motors Showroom & Workshop : NH-52A, Near Shiv Mandir, 6 Km Between Nahalagun, Dist. Papumpare Itanagar, Arunachal Pradesh - 791 110 Tel. : 0360 - 2001166 / 67, 2033153 STATE - ASSAM L L L L L BONGAIGAON Raj N Dibyani Automobiles Showroom & Workshop : Near Lower Assam Hospital, Chapaguri Road, North Bongaigaon, Bongaigaon Tel.: 03664 - 231890, 230545 DIBRUGARH Pashupati Traders Showroom & Workshop : P. N. Road, Chiring Chapori, Dibrugarh - 786 001 Tel. : 0373 - 2323281 Telefax : 0373 - 2323296 GUWAHATI Srishti Automobiles Pvt. Ltd. Showroom : Opp. Pantaloons, G S Road, Rukminigaon, Guwahati, Assam - 781 022 Tel. : 0361 - 2223666 Fax : 0361 - 2223888 SHIBSAGAR Pashupati Traders Showroom & Workshop : KPM Chariali, Shivasagar, Shivasagar - 785 640 Tel. : 03772 - 220082 / 88 NAGAON LB Motor (A Unit of Borah & Sons Pvt. Ltd) Showroom & Workshop: AT Road, Dimarguri, Nagaon - 782003 Tel.: 03672- 253157 TEZPUR GNB Motors Showroom : P.O. Nikamul, Beside Udyanpath, Tezpur - 784001 Tel. : 03712 - 255999 Workshop : P.O. Nikamul, Udyanpath, Tezpur - 784001 Tel. : 03712 - 255998 L TINSUKIA Dhansri Motors Showroom & Workshop : Opposite New Tinsukia Railway Junction, A.T. Road, Hijuguri, Tinsukia - 786125. Tel. : 0374 - 2311397 Workshop : Bhootnath Road, Sahadurpur, PS Agamkuan, Patna - 800 020 Tel. : 0612 - 2341151 L L L L MUZAFARPUR Pandey Motors Pvt. Ltd. Showroom & Workshop : Mithila Body Builders, NH-18, Bhagwanpur, Muzafarpur - 842 001 Tel. : 0621 - 2252762 PATNA Pandey Motors Pvt. Ltd. Showroom : Pandey Plaza, Exhibition Road, Patna - 800 001 Tel. : 0612 - 2205195, 3955491 Fax : 0612 - 2205196 GAYA Brijnandan Automobile Pvt. Ltd. Showroom & Workshop : 727 Old 1026 / New No. NH - 83, Near BMP - 3, Gaya - 823004 Tel. : 0631 -2200131 PURNEA Hare Krishna Motors Pvt. Ltd. Showroom & Workshop : Damka Chowk, NH - 31, Gulabbagh, Purnea - 854326 Tel. : 9234323211 STATE - JHARKHAND L L STATE - BIHAR Workshop : Radha Nagar, VIP Road, Six mile, Guwahati, Assam - 781 022 L SILCHAR Smart Motors Pvt. Ltd. Showroom & Workshop : NH-54, Ramnagar, Silchar - 788 008 Tel. : 03842 - 268701, 9207042806 L L BOKARO Power Motors Showroom & Workshop : N-1, City Centre, Sector - 4, Bokaro Steel City, Bokaro - 827004 Tel. : 0654 2- 233555 / 232977 Fax : 06542 - 232988 HAZARIBAGH Laxmi Auto Showroom & Workshop : Zulu Park Road, Near SBI Main Branch, Hazaribagh - 825301 Tel. : 06546 - 222929 JAMSHEDPUR Narbheram Motors Pvt. Ltd. Showroom & Workshop : M-4, Phase-VI, Adityapur Industrial Area, P.O. Gamaria, Jamshedpur - 832 108 Tel. : 0657 - 3293612, 3297763, 3290649, 6510531 Telefax : 0657 - 2200532 RANCHI Rahul Automobiles Pvt. Ltd. Showroom 1 : Piska More, Ratu Road, Ranchi - 834 005 Tel. : 0651 - 2510251 / 52 224 Service network Showroom 2 : Line Tank Road, MR Tower, Ranchi - 834 001 Tel. : 0651 - 3298436 Fax : 0651 - 2510252 L L L L L L BALASORE Venus Auto Works Pvt. Ltd. Showroom & Workshop: NH - 5, Remuna Golai, Januganj, Near Bhatter Mill, Balasore -756 019 Tel. : 06782 - 244013, 244014 BHUBANESWAR Venus Auto Works Pvt. Ltd. Showroom & Workshop : A/62, Nayapalli, Bhubaneswar - 751 003 Tel. : 0674 - 3019999 (Showroom) 0674 - 3019900, 3270444, 9337070444 (Workshop) Telefax : 0674 - 3019908 Super Sales Automobiles Pvt. Ltd. Showroom & Workshop : Plot No. 644/2148, NH-5, Pahal, Bhubneswar, Dist - khurda - 752 101 Tel. : 0674 - 2463913, 2463914, 6543010 / 11 CUTTACK Super Sales Automobiles Pvt. Ltd. Showroom : Rudrapur, NH - 5, Pratap Nagri, Cuttack - 753 011 Tel. : 0671 - 2686878 Fax : 0671 - 2686889 SAMBALPUR Bharat Motors Ltd. Showroom & Workshop : 9, Industrial Estate, Near Central School, Bareipali, Sambalpur - 768 006 Tel. : 0663 - 2402736, 2405286 Fax : 0663 - 2585894 L Dulichand Motors Pvt. Ltd. Showroom : "Shrachi Towers", 686 Anandapur, E.M. Bypass, Near Ruby Hospital, Kolkatta - 700 107 Tel. : 033 - 24431801 - 02, 40141616 Fax : 033 - 40141624 STATE - WEST BENGAL Workshop : Ratu Road, Near Kamre Ashram, Ranchi - 834 005 Tel. : 0651 - 2511558 / 564, 3241206 STATE - ORISSA ROURKELA Balaram Motors Showroom & Workshop : Opposite Pahadi Kanta, Vedvyash, Rourkela - 769 041 L L L Workshop : 5/51, Jagatipota, Ahalya Nagar, Opp. Jagatipota Kisan Market, Kolkatta - 700 099 Tel. : 033 - 40161718, 24264224, 24264214 ASANSOL Shaila Autotech Showroom & Workshop : NH-2, Chanda More, Asansol - 713 339 Telefax : 0341 - 2343704 / 705 L Devansh Auto Sales Pvt. Ltd. Workshop : 49, DC Dey Road, Lane Beside Silver Sprin, E M By-Pass Road, Kolkata - 700015 Tel. : 033 - 23296666 m Longia Motors Pvt. Ltd. Workshop 1 : 15/1D, Sahanagar Road, (Near Rashbehari Avenue Crossing), Kolkatta - 700 026 Tel. : 033 - 66270100 / 119 Fax : 033 - 66270121 HOWRAH Priti Motor Udyog (P) Ltd. Showroom : NH-6, Bombay Howrah Highway, Howrah KOLKATA OSL Autotech Pvt. Ltd. Showroom : 2/1A, Sarat Bose Road, Lansdowne Towers, Kolkata - 700 020 Tel. : 033 - 66270400 Workshop 2 : Budge Budge Trunk Road, Rampur, P.O. : Gobindopur, P.S. : Maheshtala, Kolkata - 700 141 Tel. : 033 - 66270222/223/205 Fax : 033 - 66270208 Workshop : 49 E, Topsia Road South, Kolkata - 700 046 Tel. : 033 - 66270500 L Speed Autotech Showroom : "The Meridian", Kazi Nazrul Islam Sarani, (VIP Road), Kolkata - 700 059 Tel. : 033 - 25007915 - 9 Fax : 033 - 40150824 L Workshop 1 : 241/2B, APC Road, Opp. Khanna Cinema, Kolkata - 700 004 Tel. : 033 - 25551370 / 72 / 73 / 74, 25552509 Workshop 2 : 108 F, Nilgunge Road, Agarpara, Kolkata - 700058 Tel. : 033 - 25552509 SILIGURI Kaysons Automotive Pvt. Ltd. Showroom & Workshop : IIIrd Mile, Checkpost, Opp. New Eastern Bypass Road, Sevoke Road, Siliguri - 734 401 Tel. : 0353 - 2544533 - 35, 2777723 Fax : 0353 - 2544456 STATE - MANIPUR L IMPHAL Rajpri Enterprise Showroom & Workshop : Chigmeirong Mamang Leikai, Imphal East, Imphal - 795 001 Tel. : 0385 - 2421183 Service network 225 STATE - NAGALAND L DIMAPUR Urban Station Showroom & Workshop : NSC Petrol Pump, NH-39, 6th Mile, Kohima Road, Dimapur, Nagaland - 797 112 Tel. : 03862 - 240994, 240992 STATE - TRIPURA L AGARTALA Sri Krishna Automobiles Showroom & Workshop : Plot No. 4612 & 4615, Shanihani, Airport Road, Agartala, Tripura West - 799 001 Tel. : 0381 - 2342566 STATE - MEGHALAYA L SHILLONG DH Royal Cars Showroom & Workshop : Parkview, Fire Brigade, Shillong - 793 014 Tel. : 0364 - 2520481, 2520477 STATE - SIKKIM L GANGTOK GEN X Motors Showroom : 5th Mile, Jhordhara, Tadong, Gangtok - 737 102 Tel. : 03592 - 202515 Fax : 03592 - 203171 Workshop : C/o Garima Enterprise, P.S. Road, Gangtok - 737 101 Tel. : 03592 - 202515 STATE - MIZORAM L AIZAWL Highland Showroom & Workshop : A-L Road, Zemabawk, Aizawl - 796017 Tel. : 0389 - 2351916 226 Service network INTERNATIONAL L L SRI LANKA Mag City Motor Company Pvt. Ltd. Showroom & Workshop : No. 320A, Darley Road, Colombo - 10, Sri Lanka Tel. : 0094777410407 BHUTAN Global Trade Showroom : Lkahilham, Changgankha, Thimphu, Bhutan Workshop : Post Box No. 1037, Olarongcchu, Thimphu, Bhutann !"#$%& ! &!& '!(! ) !(*#! +!,-./0102 !!34,!51 6 2- !, 7 0 3(/ .*,!51 0 !"##$%&''('''&'&'