accessories - National Meter Industries

CVM Power analyzers
accessories
Converter TCP2RS+
Converter of RS-232 / RS-485 to Ethernet Modbus
Description
TCP2RS+ is a gateway for the conversion of the Ethernet physical medium to RS232 or RS485, or vice versa. The unit is
fitted with a Web Server, from which the user can fully parametrize the device configuration parameters.
Powerful
TCP2RS+ is a gateway developed entirely in the CIRCUTOR
factory, incorporating the latest Ethernet network integration
technology with high reliability, stability and robustness of use.
TCP2RS+ can work in fixed IP mode, and even in DHCP mode
through name identification.
Versatile
TCP2RS+ is designed to work in multiple communication modes by simply selecting the desired option through the configuration Web Server. In master-slave function, the unit’s Ethernet
port can work in UDP or TCP mode to a configurable port, or
in Modbus/TCP to port 502. In addition, the unit has routing
functions to develop RS232/485 topologies on existing Ethernet infrastructures.
The selection of the network protocol series (RS232 or RS485)
and other network parameters is done through the configuration web site.
Features
Network protocols
TCP / UDP / MODBUS TCP / HTTP
Ethernet
10BaseT / 100BaseTX with
autodetect (RJ45)
Serial port
RS485/RS232 three cables
(A/B/GND) (RX/TX/GND)
Serial port speed
4800...115,200 bps
Serial port data bits
7/8
Serial port stop bits
1/2
Serial port parities
even, odd, none
Configuration
HTTP/JSON/DHTML
Firmware
Upgradeable from a web site
Diagnosis LEDs
Power / RX / RT / FULL/HALF (Ethernet) / ACTIVITY / 10M/100M / LINK
Versatile power supply
85…290 VAC / 120…410 VDC
Power supply connection
Metallic terminals for "posidraft"
screws
Build features
Industrial
TCP2RS+ is the only gateway on the market with multi-range
power supply and a DIN-type enclosure with as few as 2 modules. Its switching power supply allows you to power the device
from 85 to 290 volts in alternating current, and from 120 to 410
volts in direct current.
}}Easy IP programming through the IP setup program
(Windows)
}}Easy access to the configuration Web Server once its
IP is known
}}RS232 or RS485 interface can be selected through
Internet Explorer
}}Multiple communications protocols: UDP, TCP, Modbus/
TCP or routing functions
}}Ethernet connection RJ45 10/100BaseTX
}}Connection of up to 32 units on the bus (RS485)
}}Compatible with any application on the market
(PowerStudio / PowerStudio SCADA)
Box
Self-extinguishible
polycarbonate UL94 PV0
Protection degree
IP20
Attachment
Can be attached to DIN rail
46277 (2 modules)
Environmental conditions
Standard temperature
-10 / 60 °C B
Storage temperature
-40 / 85 °C
Humidity without condensation
5…95%
Safety
Installation category Class III / EN61010 double-insulated electric shock protection class II. The equipment must be connected to a power circuit protected with
type gl fuses, in compliance with IEC 269, or type M, with values from 0.5 to 1A.
It must be fitted with a circuit breaker switch or equivalent device, in order to be
able to disconnect the device from the power supply. The power supply cable
must have a cross-section of at least 1mm2.
Standards
IEC 60664, VDE 0110, UL 94, EN61010-1, EN55011, EN 61000-4-2, EN 610004-3, 61000-4-11, EN 61000-6-4, EN 61000-6-2, EN 61000-6-1, EN 61000-6-3,
EN 61000-4-5, EC
References
Application
Converting RS-2323 or RS-485 signals to Ethernet or
viceversa
M5-40
Type
Code
TCP2RS+, Ethernet Converter to RS232 / RS485
M54033
Download PDF
Similar pages