ECS3810-26T
L2 Fast Ethernet Carrier Grade Switch
Product Overview
The Edge-Core ECS3810-26T is a Carrier Ethernet access switch ideal for Ethernet service demarcation,
extension and aggregation.
ECS3810-26T allows service provider to deliver managed converged services such as voice, video and data
over virtual Ethernet, MPLS/VPLS and IP networks. Flexible combo , QoS, advanced operation,
administration and maintenance (OAM), support for extended temperature range environments, the
ECS3810-26T is an adds value and builds differentiated services over Carrier Ethernet networks.
Key Features and Benefits
Carrier-class design
Service Monitoring and Management
The Edge-Core ECS3810-26T is a carrier grade aggregation
switch consists of 24 FE ports with 2 Gigabit Combo ports.
The ECS3810-26T supports IEEE 802.1ag Connectivity Fault
Management (CFM) and ITU-T Y.1731, allowing service
provider to monitor end to end services, identify connectivity
and performance issues and isolate the problem from a
remote location without dispatching engineer onsite.
All interfaces of the ECS3810-26T are located in the same
panel, including CIT (Craft Interface Terminal) out of band
management port, external alarm input /output interface and
power outlet.
The ECS3810-26T is a carrier grade switch which provides dual
power input with AC and DC and the operating temperature is
ranging from -25 ℃~ 65 ℃ .
It also provides the capability to monitor service availability,
delay, jitter and dropped packets, for verifying SLA
conformance for billing purposes and providing advance
indication of performance degradation before a service outage
occurs.
The Fan-less design of ECS3810-26T ensures noiseless
operation and increase the reliability of the system.
Comprehensive QoS
The design of the ECS3810-26T is green consumption and high
energy efficiency in order to reduce the effect of the global
warming. The 55nm switch controller chipset and Green
Ethernet power saving features significantly reduce the power
consumption. The Fan-less design also reduce the power
consumption.
When a loss of power is detected, the dying gasp support allows
200msec for the system to notice administrator by an SNMP
trap.
Continuous Availability
The ECS3810-26T supports G.8032 Ethernet Ring Protection
Switching with the ability for the network to detect and recover
from incidents without impacting users, meeting the most
demanding quality and availability requirements. Rapid recovery
time when problems do occur is as low as 50ms.
ECS3810-26T supports Three Color Marker and Policing
Single rate: Committed Information Rate (CIR) Two rate: CIR +
Peak Information Rate (PIR) Traffic Policing: Drop or remark
the priority tag of packets exceeds burst size
Virtual Private Network
The ECS3810-26T supports L2 VPN by using Q-in-Q
functions in which an 802.1Q tag from a customer VLAN
(called CE-VLAN ID) is encapsulated in a second 802.1Q tag
from a service-provider network (called an SP-VLAN ID).
Support L2 Protocol Tunneling for STP, CDP, VTP, PVST+,
with Cisco proprietary multicast address (01-00-0c-cd-cd-d0)
replacement.
Layer 2 PDU filtering allows a service provider to specify which
Layer 2 PDUs are to be dropped at an ingress interface on a
provider edge switch.
For a world always connected…
ECS4810-12M Product Specifications
Features
Physical Ports
24 10/100Base-T ports and 2 Gigabit combo ports (RJ-45/SFP)
Dual power input with 1 AC and 1 DC Power Connector
1 out of band 1000Mbps RJ45 Management Port
1 RJ45 Console Port
1 DB15 Alarm
Performance
Switching Capability: 8.8Gbps
Packet Buffer Size: 8Mb
MAC Address Table: 16K
L2 Features
Tri-speed (10/100/1000Base-T) copper interfaces
Auto-negotiation for port speed and duplex mode
Dual-speed(100M and 1000M) fiber interfaces
SFP port support changeable 1000Base-SX/LX/LHX/ZX
transceiver
Digital Diagnostic Monitoring (DDM)
Flow Control:
IEEE 802.3x for full duplex mode
Back-Pressure for half duplex mode
Spanning Tree Protocol:
IEEE 802.1D Spanning Tree Protocol (STP)
IEEE 802.1w Rapid Spanning Tree Protocol (RSTP)
IEEE 802.1s Multiple Spanning Tree Protocol (MSTP)
BPDU Guard
BPDU filtering
Root Guard
BPDU transparent
Loopback detection
ITU-T G.8032 Ethernet Ring Protection
Sub 50 msec convergence
Revertive operation mode
Multiple-ring network
VLANs:
Supports 4K VLAN
Port-based VLAN
IEEE 802.1Q VLAN
IEEE 802.1v Protocol-based VLAN and Subnet –based VLAN
MAC-based VLAN
Traffic Segmentation
GVRP
L2 Virtual Private VLAN
QinQ
selective QinQ
L2 Protocol tunneling (xSTP, CDP, VTP & PVST+)
CDP/PVST+ Filtering
Support Voice VLAN
Link Aggregation:
Static Trunk
IEEE 802.3ad Link Aggregation Control Protocol
Trunk groups: 12, up to 8 ports per group
IGMP Snooping:
IGMP v1/v2/v3 snooping
IGMP Proxy reporting
IGMP Filtering
IGMP Throttling
IGMP Immediate Leave
IGMP Querier
MVR (Multicast VLAN Registration)
Support 5 Multicast VLAN
Port Mirroring
Supports jumbo frames up to 10KB
TEL: 886-3-5053801 FAX: 886-3-5780764
1, Creation Rd. III, Hsinchu Science Park, Taiwan 30077
sales_ec@edge-core.com
www.edge-core.com
QoS Features
Priority Queues: 8 hardware queues per port
Traffic classification
IEEE 802.1p CoS
IP Precedence
DSCP
MAC Access control list ( Source/Destination MAC, Ether
type, Priority ID/ VLAN ID )
IP Standard access control list (Source IP)
IP extended access control list (Source/Destination IP,
Protocol, TCP/UDP port number)
Traffic Scheduling
Strict Priority
Weighted Round Robin
Strict + WRR traffic scheduling
Weighted Random Early Detection
Two rate Three color marker
Ingress traffic policing
Egress traffic shaping
Marking/remarking
Rate Limiting (Ingress and Egress, per port base)
GE: Resolution 64Kbps ~ 1000Mbps
Bundle Rate Control
Security
Port security
IEEE 802.1X port based and MAC based authentication
Dynamic VLAN Assignment, Auto QoS, Auto ACL
MAC authentication, Web authentication
Voice VLAN, Guest VLAN
L2/L3/L4 Access Control List
MAC Access control list ( Source/Destination MAC, Ether
type, Priority ID/ VLAN ID )
IP Standard access control list (Source IP)
IP extended access control list (Source/Destination IP,
Protocol, TCP/UDP port number)
IPv6 ACL
DHCP Snooping
DHCP Option 82
IP Source Guard
Dynamic ARP Inspection
PPPoE IA
Login Security
RADIUS authentication
TACACS + authorization and accounting
TACACS+ 3.0
Management Security
SSH (v1.5/v2.0) for security Telnet
SSL for HTTPS
SNMPv3
OAM
IEEE 802.3ah Link
IEEE 802.1ag Connectivity Fault Management
Connectivity check
Loopback
Linktrace
ITU-T Y.1731 Performance and Throughput Management
Frame Delay
Frame Delay variation
ECS3810-26T Product Specifications
Features
Green Ethernet
Save power when ports are not connected
Reduces power for short cable runs
IPv6 Features
IPv4/IPv6 Dual Protocol stack
IPv6 Address Types Stack: Unicast
IPv6 Neighbor Discovery
SNMP over IPv6
HTTP over IPv6
Remote IPv6 ping
Management Features
Switch Management:
CLI via console port or Telnet
WEB management
SNMP v1, v2c, v3
Firmware & Configuration:
Firmware upgrade via TFTP server
Multiple configuration files
Configuration file upload/download via TFTP server
RMON (groups 1, 2, 3 and 9)
BOOTP, DHCP client for IP address assignment
DHCP dynamic provision option 66,67*
SNTP
Event/Error Log/ Syslog, SMTP
Supports LLDP (802.1ab)
UPnP
IP clustering
(Optional) ECview Pro, a powerful network management
software
that maximizes the managed capabilities of Edge-Core
devices with:
Topology Management
Performance Management
Configuration Management
Event Management
SNMP Management
Mechanical
Dimensions (W x D x H): 252 mm x 440 mm x 44 mm
Weight : 3.2kg (7.05lbs)
LED Indicators: Port, Uplink, System, Diagnostic
Safety
UL(CSA 22.2. NO 60950-1 & UL60950-1)
CB(IEC60950-1)
Electromagnetic Compatibility
CE Mark
FCC Class A
CISPR Class A
Environmental Specifications
Temperature:
IEC 68-2-14
0℃ to 60℃ (Standard Operating)
-40℃ to 70℃ (Non-Operating)
Humidity: 10% to 90% (Non-condensing)
Vibration: IEC 68-2-36, IEC 68-2-6
Shock: IEC 68-2-29
Drop: IEC 68-2-32
Power Supply
Dual power input
 AC Input: 110V ±10V, 50~60Hz, 0.33A
 DC Input: -42V~-56V, 0.57A
Internal, auto-ranging transformer: 100 to 240 VAC, 50 to 60 Hz
Power Consumption
16.1 Watts maximum
Dying gasp
Warranty
Please check www.edge-core.com for the warranty terms in your country
For More Information
To find out more about Edge-Core Networks products and solutions, visit
www.edge-core.com
About Edge-Core Networks
Edge-Core Networks is in the business of providing innovative network
solutions. In the service provider network, in the data center or in the cloud,
Edge-Core Networks delivers the software and systems that transform the way
the world connects. Edge-Core Networks serves customers and partners
worldwide. Additional information can be found at www.edge-core.com.
To purchase Edge-Core Networks solutions, please contact your Edge-Core
Networks representative at 886 3 563 8888 or authorized reseller.
© Copyright 2012 Edge-Core Networks Corp. The information contained herein is subject to change
without notice. This document is for informational purposes only and does not set forth any warranty,
expressed or implied, concerning any equipment, equipment feature, or service offered by Edge-Core
Networks. Edge-Core Networks shall not be liable for technical or editorial errors or omissions contained
Ordering Information
Optional Accessories
ET4201-SX
ET4201-LX
ET4201-LHX
ET4201-ZX
ECView Pro
TEL: 886-3-5053801 FAX: 886-3-5780764
1, Creation Rd. III, Hsinchu Science Park, Taiwan 30077
sales_ec@edge-core.com
www.edge-core.com
Product Description
1Gbps, Small Form Factor Pluggable (Distance: 500m; Wavelength: 850nm)
1Gbps, Small Form Factor Pluggable (Distance: 10km; Wavelength: 1310nm)
1Gbps, Small Form Factor Pluggable (Distance: 40km; Wavelength: 1310nm)
1Gbps, Small Form Factor Pluggable (Distance: 80km; Wavelength: 1550nm)
SNMP Network Management Software
EC-DS-1212-01
Download PDF
Similar pages