5FCX44
Coaxials - 5.0 Inches
200 W continuous program power capacity
70° nominal coverage
60 - 18000 Hz response
91 dB sensitivity
19 mm (3/4”) HF unit exit diameter
B&C Speakers s.p.a.
Via Poggiomoro, 1 - Loc. Vallina, 50012 Bagno a Ripoli (FI) - ITALY - Tel. +39 055 65721 - Fax +39 055 6572312 - mail@bcspeakers.com
8Ω
5FCX44
Coaxials- 5.0 Inc hes
SPECIFICATIONS
Nominal Diameter
Nominal Impedance
Minimum Impedance LF
Minimum Impedance HF
SPECIFICATIONS LF UNIT
127 mm (5.0 in)
8Ω
107.5 dB
HF Sensitivity 5
100 W
HF Nominal Power Handling6
10 W
6.5 Ω
LF Continuous Power Handling4
200 W
HF Continuous Power Handling7
20 W
6.5 Ω
LF Voice Coil Diameter
Frequency Range
Dispersion Angle1
70 °
Magnet Material
Ceramic (LF) - Neodym. Ring (HF)
PARAMETERS
44 mm (1.7 in)
Copper
LF Winding Material
LF Flux Density
Former Material
61 Hz
Re
5.6 Ω
0.25
7.8
Qts
0.25
Vas
7.0 dm 3 (0.25 ft3)
Sd
95.0 cm 2 (14.7 in2)
η₀
0.6 %
Xmax
3.0 mm
Xvar
5.0 mm
Mms
12.0 g
Bl
10.5 Txm
Le
0.8 mH
EBP
244 Hz
HF Voice Coil Diameter
25 mm (1.0 in)
Aluminium
HF Winding Material
1.07 T
HF Flux Density
Kapton
Diaphragm Material
1.65 T
Polyester
Winding Depth
9.0 mm (0.35 in)
Recommended Crossover8
2.5 kHz
Magnetic Gap Depth
6.0 mm (0.24 in)
Inductance
0.1 mH
MOUNTING AND SHIPPING INFO
Resonance Frequency
Qms
91.0 dB
LF Sensitivity 2
LF Nominal Power Handling3
60 - 18000 Hz
Qes
SPECIFICATIONS HF UNIT
Overall Diameter
Bolt Circle Diameter
Baffle Cutout Diameter
Depth
SERVICE KIT
136 mm (5.35 in)
142 mm (5.6 in)
Replacement diaphragm
MMDDE58
122 mm (4.8 in)
8 mm (0.31 in)
Net Weight
1.85 kg (4.1 lb)
Shipping Weight
RCK005FCX448
110 mm (4.33 in)
Flange and Gasket Thickness
Shipping Units
Service Kit LF
1
2.3 kg (5.07 lb)
Shipping Box
255x255x150 mm (10.04x10.04x5.91 in)
1.
2.
3.
4.
5.
6.
Included by –6 dB down points.
Applied RMS Voltage is set to 2.83V.
2 hours test made with continuous pink noise signal within the range Fs-10Fs. Power calculated on rated nominal impedance. Loudspeaker in free air.
Power on Continuous Program is defined as 3 dB greater than the Nominal rating.
Applied RMS Voltage is set to 2.83V.
2 hour test made with continuous pink noise signal within the range from the recommended crossover frequency to 20 kHz. Power calculated on rated
nominal impedance. Loudspeaker in free air.
7. Power on Continuous Program is defined as 3 dB greater than the Nominal rating.
8. 12 dB/oct. or higher slope high-pass filter.
B&C Speakers s.p.a.
Via Poggiomoro, 1 - Loc. Vallina, 50012 Bagno a Ripoli (FI) - ITALY - Tel. +39 055 65721 - Fax +39 055 6572312 - mail@bcspeakers.com
Download PDF
Similar pages