Industrial Ethernet Switch Optical/PoE Network Accessories
v1.1 / Dec, 2011
Industrial
Ethernet Switch
INJ-102GT(HW version2.0)
Industrial 2-port Gigabit High Power PoE Injector
Features
Industrial
Media Converter
▪ Supports 2x10/100/1000Base-T(X) for power and data Output
▪ Fully compliant with IEEE 802.3at/802.3af
▪ Auto protection for Over Voltage Power Input and over current output
Industrial
Device Server
▪ Supports Power Output up to 30Watts at 50VDC input
▪ IP-30 Rugged Case Design
▪ DIN-Rail and Wall Mount Design
Industrial Wireless
Access Point
Introduction
Practical Operation
Industrial
M2M Gateway
Note : The equipment being powered must be fully IEEE 802.3at/802.3af compliant in order for the power supply to be able to sense
the PoE devices signature and apply power. Power is supplied on Ethernet pins 1/2 (V+) and 3/6 (V-).
Industrial Cellular
VPN Router
The INJ-102GT PoE Injector is an advanced IEEE802.3at compliant device with Intelligent Detection, providing 2-ports of 10/100/1000Base-T(X) PoE outputs.
The device does not turn on power until it detects a valid PoE signature from the PoE devices attached downstream on the Ethernet cable. This mechanism
protects against damage to non-PoE compliant equipment which may be connected to the Ethernet cable. Because of this Intelligent Detection, only an IEEE
802.3at/802.3af compliant device can be powered with the INJ-102GT PoE Injector. Typically in Ethernet networks the maximum allowable CAT5 cable length is
about 100 meters – due to the limitation of the Ethernet standards. Because of its 50V insertion, the installer does not need to worry about voltage drops caused
by cable length. The INJ-102GT PoE Injector can function with any PoE P.D. equipment which is fully compliant with the IEEE 802.3at/802.3af PoE standards.
Power 50VDC
50VDC
Power
Accessories
Power Supply
DR-75-48
(adjustable to 50VDC output)
Data
D t
PoE
Data
IAR-120+
(P.D.)
Data
PoE
IGS-1050A
Non-PoE Ethernet Switch
Data + Power
IP Camera
(P.D.)
INJ-102
(P.S.E.)
PoE Injector Connections
Network
Management Software
File Server
1-269
ICP Deutschland GmbH – Tel. 07121-14323-0 – Fax 07121-14323-90 – www.icp-deutschland.de
Industrial Ethernet Switch Optical/PoE Network Accessories
v1.1 / Dec, 2011
Dimensions
Industrial Ethernet Switch
1
(Unit=mm)
Connectors and Pin Definitions
RJ-45 Output (Data and Power)
RJ-45 Input (Data Only)
Pin No.
Symbol
Description
Symbol
Description
1
2
3
4
5
6
7
8
Rx+ (VDC+)
Rx- (VDC+)
Tx+ (VDC-)
NC
NC
Tx- (VDC-)
NC
NC
Data Receive and Feeding power(+)
Data Receive and Feeding power(+)
Data Transmit and Feeding power(-)
Not Connected
Not Connected
Data Transmit and Feeding power(-)
Not Connected
Not Connected
Rx+
RxTx+
NC
NC
TxNC
NC
Data Receive
Data Receive
Data Transmit
Not Connected
Not Connected
Data Transmit
Not Connected
Not Connected
Note: Pins 3 and 6 (VDC -) should not be shorted to ground.
1-270
ICP Deutschland GmbH – Tel. 07121-14323-0 – Fax 07121-14323-90 – www.icp-deutschland.de
Industrial Ethernet Switch Optical/PoE Network Accessories
v1.1 / Dec, 2011
ORing Injector Model
INJ-102
Physical Ports
2
10/100/1000Base-T(X) in RJ-45 Ethernet Port with
P.S.E. Output
2
Industrial
Media Converter
10/100/1000Base-T(X) in RJ-45 Ethernet Port Input
Operating Voltage
Input Voltage
50 VDC on 4-pin terminal block
Output Power
50V / 600mA, 30 Watts max. per port
LED Indicator
PoE Indicators
Industrial
Device Server
PWR / Ready: 1 x LED
Green On: Power is on and functioning Normally.
2 x LED
Blue On: PoE Device Link
Blue Blinking: Detecting PoE Device
Blue Off : None PoE Device Detected
Power Indicator
Protection
Present
Over Load Protection
Present
High Voltage Protection
Present
Physical Characteristics
Enclosure
IP-30
Dimension (W x D x H)
26.1 (W) x 70 (D) x 95 (H)mm (1.03 x 2.76 x 3.74 inch)
Weight (g)
250g
Environmental
-40 to 80°C (-40 to 176°F)
Operating Temperature
-20 to 70°C (-4 to 158°F)
Operating Humidity
5% to 90% Non-condensing
Regulatory Approvals
EMI
Free Fall
IEC60068-2-32
Vibration
IEC60068-2-6
Safety
EN60950-1
Warranty
2 years
EMS
Accessories
Ordering Information
I N J - 1 02
Model Name
INJ-102
Packing List
‧INJ-102
‧DIN-Rail Kit
‧Wall-mount Kit
‧Quick Installation Guide
Description
Industrial 2-port Gigabit High Power PoE Injector
Optional Accessories (Can be purchased separately)
‧DR-75-48 : 75 Watts DIN-Rail power supply (adjustable to 50 VDC output)
‧DR-120-48 : 120 Watts DIN-Rail power supply (adjustable to 50 VDC output)
‧SDR-240-48, 240W DIN-Rail power supply
‧SDR-480-48, 480W DIN-Rail power supply
Network
Management Software
Available
Model
Industrial
M2M Gateway
Shock
FCC Part 15, CISPR (EN55022) class A
EN61000-4-2 (ESD), EN61000-4-3 (RS), EN61000-4-4 (EFT), EN61000-4-5 (Surge), EN61000-4-6 (CS), EN61000-4-8,
EN61000-4-11
IEC60068-2-27
Industrial Cellular
VPN Router
Storage Temperature
Industrial Wireless
Access Point
Short Circuit Protection
Industrial
Ethernet Switch
Specifications
1-271
ICP Deutschland GmbH – Tel. 07121-14323-0 – Fax 07121-14323-90 – www.icp-deutschland.de
Download PDF
Similar pages