1
Industrial Managed Switches / EN50155 Switches
IES-5408T (IP67/IP43)
8 10/100TX + 4 10/100/1000T L2+ Industrial Managed Switch
w/ enhanced G.8032 Ring & PTP**

EN50155/61373/45545-2 verification; Optional 72V /
110V input voltage

Enhanced G.8032 ring protection < 20ms for single
ring. Supports auto mode, enhanced mode, train
mode and basic mode; Enhanced G.8032 ring covers
multicast packets; MSTP 8/16* MSTI /RSTP
IP67 model

Support PTP**v2 two-step <1us, relay contact & environmental monitoring

Miss-wiring avoidance; Repowered auto ring restore
(node failure protection)

IP67/ IP43 housing; User friendly UI, including auto
topology drawing; Complete CLI

Support LACP link aggregation, IGMP v3/router port,
DHCP server & DHCP Option82 for Port/Vlan based
DHCP distribution, Mac based DHCP server, QoS by
IP43 model
VLAN, SSH/SSL, HTTPS, INGRESS/EGRESS ACL L2/L3, IPv6, SMS

N-key configurator** for upgrading, auto/editable configuration back up and restoration
without computer
OVERVIEW
Lantech IES-5408T (IP67/IP43) is a high performance L2+
contact alarm function, the IES-5408T (IP67/IP43) is able to
(Gigabit uplink) switch with 8 10/100TX + 4 10/100/1000T by
connect with alarm system in case of power failure or port
M12 provides L2 wire speed and advanced security function for
disconnection events. The IES-5408T (IP67/IP43) also provides
network aggregation deployment. It delivers ITU G.8032
3000V EFT and 6000V ESD protection, which can reduce
enhanced ring recovery less than 20ms including train coupling
unstable situation caused by power line and Ethernet.
ring , enhanced mode for easy configuration and aggregation
ring*, comprehensive QoS, QoS by VLAN, advanced security
The IES-5408T (IP67/IP43) also embedded several features for
including INGRESS/EGRESS ACL L2/L3, SSH/SSL, Mac
stronger and reliable network protection in an easy and intuitive
based DHCP server, DHCP Option 82, DHCP server,
way. When the pre-set ring configuration failed or looped by
IGMPv1/v2/v3/router port, QinQ* (double tag VLAN) which are
miss-wiring, Lantech IES-5408T (IP67/IP43) is able to alert with
important features required in train and large network. It also
the LED indicator and send out an email, traps or a SMS text.
supports Cisco Discovery Protocol (CDP) and LLDP for
Repowered auto ring restore function (node failure protection)
Ciscoworks to detect the switch info and show on L2 map
ensures the switches in a ring to survive after power breakout is
topology.
back. The status can be shown in NMS when each switch is
back. This feature prevents the broken ring and keep ring alive
Lantech IES-5408T (IP67/IP43) features hardware-based
without any re-configuration needed. Loop protection is also
PTP** IEEE1588 v2 two-step function which can allow 4
available to prevent the generation of broadcast storm when a
10/100/1000T uplinks to synchronize the network with precise
dumb switch is inserted in a closed loop connection.
accuracy.
DHCP option 82 and relay agent function (Port/Vlan based
The Lantech IES-5408T (IP67/IP43) is designed with dual
DHCP distribution) can offer the same IP address on port base
power supply at 9.5~56VDC. Optional 72V model can accept
or vlan base where there is need to replace the new device
50.4V~90VDC dual input range for high speed train
connecting to Lantech switches to avoid any network disruption.
environment. Optional 110V model builds in dual power with
The built-in DHCP Option 82 server offers the convenience of
input voltage ranging from 43V~137.5V. Featured with relay
policy setting on the switch. Mac based DHCP server function
Datasheet Version 2.71
www.lantechcom.tw | info@lantechcom.tw
2
Industrial Managed Switches / EN50155 Switches
assigns an IP address according to its MAC address to include
immediately send an email & SMS text message to pre-defined
dumb switches in DHCP network.
addresses as well as SNMP Traps out. It provides 1DI and 1DO
while disconnection of the specific port was detected; DO will
Lantech InstaConfig software** provides easy configuration for
activate the signal LED to alarm. DI can integrate the sensors
mass deployment. The configuration file can also be exported in
for events and DO will trigger the alarm while sending alert
text file so that it can be edited and configured back to switch
information to IP network with email and traps.
with ease for mass deployment. The built-in watchdog design
can automatically reboot the switch when cpu is found dead.
The built-in environmental monitoring can detect switch overall
temperature, voltage and current where can send the SNMP
The user friendly UI, innovative auto topology drawing and
traps, email and SMS alert when abnormal.
topology demo makes IES-5408T (IP67/IP43) much easier to
get hands-on. The switch also equips the RTC (real time clock)
Lantech IES-5408T (IP67/IP43) features high reliability and
which can keep track of time always. The complete CLI enables
robustness coping with extensive EMI/RFI phenomenon,
professional engineer to configure setting by command line.
environmental vibration and shocks usually found in factory,
substation, steel automation, aviation, mining and process
Lantech IES-5408T (IP67/IP43) features enhanced G.8032 ring
control. It is the best solution for Automation, transportation,
which can be self-healed in less than 20ms for single ring
surveillance, Wireless backhaul, Semi-conductor factory and
topology protection covering Multicast packets. It also supports
assembly lines.
various ring topologies that covers double ring, multi-chain
(under enhanced ring), train ring, basic ring by easy setup than
The IES-5408T (IP67/IP43) is designed to meet with critical
others. The innovative auto-Ring configurator (auto mode) can
network environment with IP67/IP43 aluminum enclosure and
calculate owner and neighbor in one step. It supports MSTP
M12 connectors for water proof. It passed serious tests under
that allows RSTP over Vlan for redundant links with 8/16* MSTI.
extensive Industrial EMI and Safety standards. With EN45545-2
Fire & Smoke, and EN50155 verification, the IES-5408T
The configuration file of Lantech IES-5408T (IP67/IP43) can be
(IP67/IP43) is best for railway in train/track side, vehicle and
exported in text file so that it can be edited and configured back
mining applications. For more usage flexibilities, IES-5408T
to switch with ease for mass deployment. The optional N-key
(IP67/IP43) supports wide operating temperature from -40°C to
configurator offers firmware upgrade, auto/editable
75°C.
configuration back up and restoration without computer by
adjusting the DIP switch.
The optional bypass relay is set to bypass the switch to the next
one when power is off in order to protect the network from
QoS by VLAN can allow switch to tag QoS by VLAN regardless
crashing. Lantech bypass caters to remain in bypass mode until
the devices acknowledge QoS or not in which greatly enhance
the switch is completely booting up when power is back to avoid
the bandwidth management in a network.
another network lost. The bypass is also activated when
detecting the CPU watchdog is ON.
In case of event alarm, the IES-5408T (IP67/IP43) will
FEATURES & BENEFITS

8 10/100TX + 4 10/100/1000T Industrial Managed
bandwidth combination*
IP67/IP43 M12 Switch (Total 12 Ports Switch)

Provides EFT protection 3000 VDC for power line.
EN45545-2 Fire & Smoke, EN50155 and EN61373

Supports 6000 VDC Ethernet ESD protection
shock/vibration verification

LACP load balancing to distribute the load*

IEEE 1588 PTP** v2 two-step at 4 Giga ports

Built-in RTC (Real Time Clock) to keep track of time

N-key** configurator for firmware upgrade,

Supports IEEE 802.1p Class of Service, per port

auto/editable configuration back up and restoration
provides 8 priority queues Port base, Tag Base and

Back-plane (Switching Fabric): 9.6Gbps

16K MAC address table

10KB Jumbo frame supported on all ports

User friendly UI, auto topology drawing, topology

4K 802.1Q VLAN, Port based VLAN, GVRP**, QinQ*
demo, complete CLI for professional setting

Supports IEEE 802.1ab LLDP, Cisco CDP; LLDP info


Enhanced G.8032 Ring protection in 20ms for single
ring

Support various ring/chain topologies, including
train ring& aggregation ring*

Enhanced G.8032 ring configuration with ease

Auto ring configuration(auto mode) for single
ring

Ring covers multicast on different ports

Train ring for auto coupling topology
Aggregation ring for ring redundancy and
Type of Service Priority

IEEE 802.1d STP, IEEE 802.1w RSTP,802.1s MSTP
VLAN redundancy
can be viewed via Web/ Console/ LantechTM


InstaConfig**/ LantechTM InstaView**
DHCP server / client / DHCP Option 82 relay / DHCP
Option 82 server for Port/Vlan based DHCP
distribution
Mac based DHCP server to assign IP address that
includes dumb switches in DHCP network

Bandwidth Control

Ingress packet filter and egress rate limit

Broadcast/multicast packet filter control
Datasheet Version 2.71
www.lantechcom.tw | info@lantechcom.tw
3
Industrial Managed Switches / EN50155 Switches

Relay alarm output system events

Login Security: IEEE802.1X/RADIUS

Miss-wiring avoidance

HTTPS for secure access to the web interface


LED indicator

Email, traps, or SMS notification

flow with multicast packets binding with ports for IP
Repowered auto ring restore

Ensure the switches in a ring to survive after
surveillance application

power breakout is back


TFTP/HTTP firmware upgrade; LantechTM
in ring and for reversed multicast video flow

Multicast VLAN registration for metro video*

IGMPv1,v2,v3 with Query mode for multimedia;
InstaConfig** for multiple upgrade

System Event Log, SMTP Email alert, SMS mobile
GRMP*

(text) and SNMP Trap for alarm support; 32 RMON
counters

Multicast static route for non- IGMP camera to
prevent flooding; IGMP router port to assign query
The status can be shown in NMS when each
switch is back
Static multicast forwarding forward reversed IGMP
Watchdog design to auto reboot switch CPU is
found dead

Security
Built-in environmental monitoring for system input
voltage, current, ambient temperature

SSL/SSH/INGRESS/EGRESS ACL L2/L3

Supports DIDO (Digital Input/Digital Output)

Port Security: MAC address

IP67/IP43 aluminum housing with DIN rail** and wall
entries/Filter/MAC-Port binding


IP Security: IP address security management to
mount design

Bypass protection** - Bypass failed switch caused
prevent unauthorized intruder.
by power failure of switch to protect network
Management access control with priority
intactness
DIMENSIONS (unit=mm)
IP67 model
IP43 model
Datasheet Version 2.71
www.lantechcom.tw | info@lantechcom.tw
4
Industrial Managed Switches / EN50155 Switches
SPECIFICATION
Hardware Specification
Standards
IEEE 802.3 10Base-T Ethernet
IEEE 802.3u 100Base-TX
IEEE802.3ab 1000Base-T
IEEE802.3x Flow Control and Back Pressure
IEEE802.3ad Port trunk with LACP
IEEE802.1d Spanning Tree
IEEE802.1w Rapid Spanning Tree
IEEE802.1s Multiple Spanning Tree
IEEE 802.3ad Link Aggregation Control Protocol
(LACP)
IEEE 802.1AB Link Layer Discovery Protocol (LLDP)
IEEE 802.1X User Authentication (Radius)
IEEE802.1p Class of Service
IEEE802.1Q VLAN Tag
Switch
Architecture
Back-plane (Switching Fabric): 9.6Gbps
Transfer Rate
14,880pps for Ethernet port
148,800pps for Fast Ethernet port
1,488,000pps for Gigabit Ethernet / Gigabit Fiber port
CPU
Marvell 800Mhz
RAM
256M Byte
Flash
128M Byte
Mac Address
16K MAC address table
Jumbo frame
10KB on all ports
Connectors
10/100TX: 8 x ports M12 4-pole D-coded with Auto
MDI/MDI-X function
10/100/1000T: 4 x ports M12 8-pole A-coded with Auto
MDI/MDI-X function
RS-232 connector: 1 x M12 5-pole A-coded
Power Input connector : 1 x M12 5-pole A-coded
Relay contact : 1 x M12 5-pole A-coded
Network Cable
10Base-T: 2-pair UTP/STP Cat. 3, 4, 5/ 5E/ 6 cable
EIA/TIA-568 100-ohm (100m)
100Base-TX: 2-pair UTP/STP Cat. 5/ 5E/ 6 cable
EIA/TIA-568 100-ohm (100m)
1000Base-TX: 2-pair UTP/STP Cat. 5/ 5E/ 6 cable
EIA/TIA-568 100-ohm (100m)
Bypass
Protection**
High-speed optical switching
Minimal insertion loss (Max 1.6dB as Bypass Mode)
Protocol
CSMA/CD
LED
Per unit: Power 1 (Green), Power 2 (Green), P-Fail
(Red)
Ethernet port: Link/Activity (Green), Speed (Green);
Optical fiber: Link/Activity (Green)
DI/DO
1 Digital Input (DI) :
Level 0: -30~2V / Level 1: 10~30V
Max. input current:8mA
1 Digital Output(DO): Open collector to 40 VDC, 200mA
Operating
Humidity
5% ~ 95% (Non-condensing)
Operating
Temperature
-40°C~75°C / -40°F~167°F
(72V model: -40°C~60°C / -40°F~140°F)
Storage
Temperature
-40°C~85°C / -40°F~185°F
Power Supply
Standard model:9.5~56VDC dual input
72V model: 50.4~90VDC dual input
110V model : 43~137.5VDC dual input with input
isolation
Power
Consumption
Max. 13W 12V~48VDC input
Max. 16W 72VDC/ 110VDC input
Case
Dimension
IP67 model: Aluminum case
215mm(W)x200mm(H)x84.4mm(D)
IP43 model: Aluminum case
203mm(W)x187mm(H)x84.4mm(D)
Weight
1.4kgs (IP67); 1.2kgs(IP43)
Installation
DIN Rail** and Wall Mount Design
EMI & EMS
FCC Class A,
CE EN55022 Class A, CE EN55024, CE EN61000-4-2,
CE EN61000-4-3, CE EN61000-4-4, CE EN61000-4-5,
CE EN61000-4-6, CE N61000-4-8
Stability
EN61373 (Shock and Vibration)
Testing
MTBF
284,246hrs
Verifications &
report
EN50155/EN50121-3-2/EN50121-4 verification
EN45545-2 R24/R25 (EN ISO 4589-2, EN ISO 5659-2,
NF X70-100-1 & 2) Fire & Smoke verification
Warranty
5 years
Software Specification
Management
SNMP v1 v2c, v3/ Web/Telnet/CLI
SNMP MIB
RFC 1215 Traps MIB*,
RFC 1213 MIBII
RFC 1158 MIBII
RFC 1157 SNMP MIB*,
RFC 1493 Bridge MIB*,
RFC 1573 IF MIB
RFC 2674 VLAN MIB,
Partial RFC 1757 RMON,
RFC 2674 Q-Bridge MIB*; Bridge MIB*,
LLDP MIB*
RSTP MIB*
Private MIB
Support ITU G.8032 v2/2012 for Ring protection in less
than 20ms for self-heal recovery (basic mode)
Support various ring/chain topologies
Includes train ring & aggregation ring*
Enhanced G.8032 ring configuration with ease
Ring covers multicast on different ports
Train mode for auto coupling ring configuration
ITU G.8032
PTP** v2
Support hardware-based IEEE1588 PTP**v2, End to
End (2-step) and Peer to Peer (2-step) modes in
Transparent Clock, with 4 10/100/1000T
User friendly

UI


Port Trunk
with LACP
Auto topology drawing
Topology demo
Auto configuration for G.8032(auto mode) for
single ring

Complete CLI for professional setting
LACP Port Trunk: 8 Trunk groups/Maximum 8 trunk
members
Aggregation ring for ring redundancy and bandwidth
combination*
LLDP
Supports LLDP to allow switch to advise its
identification and capability on the LAN
CDP
Cisco Discovery Protocol for topology mapping
Environmental
Monitoring
System status for input voltage, current and ambient
temperature to be shown in GUI and sent alerting if any
abnormal status
VLAN
Port Based VLAN
IEEE 802.1Q Tag VLAN (256 entries)/ VLAN ID (Up to
4K, VLAN ID can be assigned from 1 to 4096.)
GVRP** (256 Groups)**, QinQ*, QOS QinQ*
IPv6/4
Present
Spanning Tree
Supports IEEE802.1d Spanning Tree and IEEE802.1w
Rapid Spanning Tree, IEEE802.1s Multiple Spanning
Tree
Quality of
Service
The quality of service determined by port, Tag and IPv4
Type of service, IPv4 Differentiated Services Code
Points - DSCP
Class of
Service
Support IEEE802.1p class of service, per port provides
8 priority queues
QoS by VLAN
Tagged QoS by VLAN for all devices in the network
IP Security
Supports 10 IP addresses that have permission to
access the switch management and to prevent
unauthorized intruder.
Login Security
Supports IEEE802.1X Authentication/RADIUS
Port Mirror
Support 3 mirroring types: “RX, TX and Both packet”
Network
Security
Support 10 IP addresses that have permission to
access the switch management and to prevent
unauthorized intruder.
Datasheet Version 2.71
www.lantechcom.tw | info@lantechcom.tw
5
Industrial Managed Switches / EN50155 Switches
802.1X access control for port based and MAC based
authentication/MAC-Port binding
Management access control with priority
Ingress/Egress ACL L2/L3
SSL/ SSH for Management
SNMP Trap
HTTPS for secure access to the web interface
TACACS+* for Authentication
IGMP
Support IGMP snooping v1,v2,v3; Supports IGMP static
route; 256 multicast groups; IGMP router port ; IGMP
query; GRMP*
Static
Device cold start

Authorization failure

Port link up/link down

DI/DO open/close

Typology change(ITU ring)

PoE ping failure

Power failure

Environmental abnormal
Provide DHCP Client/ DHCP Server/DHCP Option 82/
DHCP Option 82 server/ Port based&VLAN based
DHCP distribution (DHCP relay agent)
surveillance application
Mac based
Assign IP address by Mac that can include dumb switch
Support ingress packet filter and egress packet limit.
The egress rate control supports all of packet type.
Ingress filter packet type combination rules are
Broadcast/Multicast/Flooded Unicast packet,
Broadcast/Multicast packet, Broadcast packet only and
all types of packet.
The packet filter rate can be set an accurate value
through the pull-down menu for the ingress packet filter
and the egress packet limit.
DHCP Server
in DHCP network
DNS
Provide DNS client feature and support Primary and
Secondary DNS server.
SNTP
Supports SNTP to synchronize system clock in Internet
Firmware
Update
Supports TFTP firmware update, TFTP backup and
restore; HTTP firmware upgrade; LantechTM
InstaConfig** for multiple upgrade
N-Key
RJ45 dongle for firmware upgrade, auto / editable
Configurator**
configuration backup/restoration
with multicast packets binding with ports for IP
bridge
Bandwidth
Control

DHCP
Static multicast forwarding forward reversed IGMP flow
MAC-Port
Up to 10 trap stations; trap types including:
RTC
Built-in Real Time Clock to keep track of time always
Flow Control
Supports Flow Control for Full-duplex and Back
Pressure for Half-duplex
Configuration
upload and
download
Supports text configuration file for system quick
installation
System Log
Supports System log record and remote system log
server
IfAlias
Each port allows an alphabetic string of 128-byte
SMTP/Text
Supports SMTP Server and 8 e-mail accounts for
SMS
receiving event alert; can send SMS text alert via
mobile
Relay Alarm
Provides one relay output for port breakdown, power
fail and alarm.
Alarm Relay current carry ability: 1A @ DC24V
Protection



assigned as its own unique name via the SNMP or CLI
interface
*Future release
**Optional
Miss-wiring avoidance
Repowered auto ring restore
Loop protection
ORDERING INFOMATION
All model packages include M12 caps and wall mount bracket. All standard models are non-coating, optional coating models
are available with –C model name.

IES-5408T-67…….…..….….......P/N: 8360-714
8 10/100TX + 4 GigaT PTP** L2+ Managed Industrial PTP** M12 IP67 Switch; -40°C to 75°C; dual 9.5~56VDC

IES-5408T-43…….…..….….......P/N: 8360-7141
8 10/100TX + 4 GigaT PTP** L2+ Managed Industrial PTP** M12 IP43 Switch; -40°C to 75°C; dual 9.5~56VDC

IES-5408T-67-B…….…..….…...P/N: 8361-700
8 10/100TX + 4 GigaT PTP** L2+ Managed Industrial PTP** M12 IP67 Switch; -40°C to 75°C; dual 9.5~56VDC w/1 pair bypass

IES-5408T-43-B…….…..….…...P/N: 8361-7001
8 10/100TX + 4 GigaT PTP** L2+ Managed Industrial PTP** M12 IP43 Switch; -40°C to 75°C; dual 9.5~56VDC w/1 pair bypass

IES-5408T-67-BB…….…..….…P/N: 8361-701
8 10/100TX + 4 GigaT PTP** L2+ Managed Industrial PTP** M12 IP67 Switch; -40°C to 75°C; dual 9.5~56VDC w/2 pair bypass

IES-5408T-43-BB…….…..….…P/N: 8361-7011
8 10/100TX + 4 GigaT PTP** L2+ Managed Industrial PTP** M12 IP43 Switch; -40°C to 75°C; dual 9.5~56VDC w/2 pair bypass

IES-5408T-67-72V…...….….......P/N: 8360-718
8 10/100TX + 4 GigaT PTP** L2+ Managed Industrial PTP** M12 IP67 Switch; -40°C to 60°C; dual 50.4~90VDC

IES-5408T-43-72V.…..….….......P/N: 8360-7181
8 10/100TX + 4 GigaT PTP** L2+ Managed Industrial PTP** M12 IP43 Switch; -40°C to 60°C; dual 50.4~90VDC

IES-5408T-67-72V-B…...….…...P/N: 8361-702
8 10/100TX + 4 GigaT PTP** L2+ Managed Industrial PTP** M12 IP67 Switch; -40°C to 60°C; dual 50.4~90VDC w/1 pair
bypass

IES-5408T-43-72V-B.…..….…...P/N: 8361-7021
8 10/100TX + 4 GigaT PTP** L2+ Managed Industrial PTP** M12 IP43 Switch; -40°C to 60°C; dual 50.4~90VDC w/1 pair
bypass

IES-5408T-67-72V-BB…...….…P/N: 8361-703
8 10/100TX + 4 GigaT PTP** L2+ Managed Industrial PTP** M12 IP67 Switch; -40°C to 60°C; dual 50.4~90VDC w/2 pair
bypass

IES-5408T-43-72V-BB.…..….…P/N: 8361-7031
8 10/100TX + 4 GigaT PTP** L2+ Managed Industrial PTP** M12 IP43 Switch; -40°C to 60°C; dual 50.4~90VDC w/2 pair
Datasheet Version 2.71
www.lantechcom.tw | info@lantechcom.tw
6
Industrial Managed Switches / EN50155 Switches
bypass

IES-5408T-67-110V…...….….....P/N: 8360-753
8 10/100TX + 4 GigaT PTP** L2+ Managed Industrial PTP** M12 IP67 Switch; -40°C to 60°C; dual 43~137.5VDC

IES-5408T-43-110V.…….….......P/N: 8360-7531
8 10/100TX + 4 GigaT PTP** L2+ Managed Industrial PTP** M12 IP43 Switch; -40°C to 60°C; dual 43~137.5VDC

N-key Configurator…………………….….P/N:8850-100
RJ45 connector dongle for firmware upgrade, auto/editable configuration backup and restoration; -20°C to 60°
OPTIONAL ACCESSORIES
M12/M23 Connector & Cable
 ECON120005PF
 ECONM12-5P(F)70CM CABLE
 ECAB124030MJS
5 pin M12 power female connector
5 pin M12 power cable 90 degree angle, 70cm
4 Pin M12 RJ45 Male 3 Meters; STP Cable
Lantech Communications Global Inc.
www.lantechcom.tw
info@lantechcom.tw
© 2014 Copyright Lantech Communications Global Inc. all rights reserved.
The revise authority rights of product specifications belong to Lantech Communications Global Inc.
Lantech may make changes to specification and product descriptions at anytime, without notice.
Datasheet Version 2.71
www.lantechcom.tw | info@lantechcom.tw
Download PDF
Similar pages