Cellular Routers 3G UMTS/HSPA+

Cellular Routers
3G UMTS/HSPA+
UR5i v2 Series
PRODUCT FEATURES
•
•
•
•
•
•
•
3G UMTS/HSPA routers, UR5i v2 series, are used to wirelessly
connect various equipment and devices via Ethernet 10/100 to the
Internet or intranet. High data transfer speed of up to 14.4 Mbit/s
(download) and upload speed up to 5.76 Mbit/s, make it an ideal
wireless solution for traffic and security camera systems, individual
computers, LAN networks, automatic teller machines (ATM) and other
self-service terminals, etc.
Key features
This exceptionally fast 3G UR5i v2 wireless router is equipped with
one Ethernet 10/100, one USB Host port, one binary Input/Output (I/O)
port and one SIM card. To save and backup communication data, a
version with 2 x SIM cards is available. A wide range of user-defined
interface options further expands optional Port1 and Port2. (EX:
Ethernet port 10/100, serial interface ports RS232/RS485/RS422/MBus/WiFi or (I/O - CNT). Port2 may be equipped with serial interfaces
RS232/RS485/RS422/M-Bus or (I/O - CNT). Routers are available in
either plastic or metal casings. FULL version of the router is equipped
with GPS.
Configuration is done via protected password web interface. The
3G UMTS/HSPA+ router supports VPN tunnel creation using IPsec,
OpenVPN and L2TP to ensure safe communication. Web interface
provides statistics about router activities, signal strength, detailed log,
etc. Cellular router supports functions: DHCP, NAT, NAT-T, DynDNS,
NTP, VRRP, control by SMS and many other functions.
Other diagnostic functions ensuring continuous communication
include automatic inspection of PPP connection offering an automatic
restart feature in case of connection losses, and hardware watchdog
which monitors the status of the router. With the help of a start up
script window you may insert Linux scripts for various actions and, for
some applications the option to create several different configurations
for one 3G wireless router, profiles (maximum of 4), and the option to
switch between them (for example via SMS, binary input status, etc.).
Cellular wireless routers can automatically upgrade configuration and
firmware from server. This allows mass reconfiguration of multiple
routers at one time.
SELECTED APPLICATIONS
Transportation and security
IT and communication
Self-service terminals
Energy and power industry
Metrology, alarm and warning systems
www.advantech-bb.com / Enabling an Intelligent Planet
Designed for M2M applications
WiFi, M-BUS and Modbus TCP / Modbus RTU
Modular design to fit application requirements
Single or dual SIM cards for redundant backhaul
Up to 5.7 Mbps upload to 14.4 Mbps download
LINUX platform & advanced networking functions
Advanced security features
ORDERING INFORMATION
Note: Check with your local distributor for availability and options. Contact
Advantech B+B SmartWorx distributors.
BB - UR2 X61XXXX
Accessories
0
1 (set)
2 (set)
3 (set)
4 (set)
Enclosure
1
2
No Accessories (DIN holder included)
Accessories with EU power supply
Accessories with UK power supply
Accessories with Australia power supply
Accessories with US power supply
Plastic enclosure
Metal enclosure
PORT2
(Full version only)
0
1
2
3
4
5
6
7
8
No expansion port
ETH
RS232
RS485
RS422
M-BUS
CNT (4× BI, 2×, 1×BO) - I/O port
WiFi
WMBUS (Wireless M-BUS)
PORT1
0
1
2
3
4
5
6
9
No expansion port
ETH
RS232
RS485
RS422
M-BUS
CNT (4× BI, 2×, 1×BO) - I/O port
Switch
Router version
B
F
Basic
Full
Please note: Isn’t possible to have in the router all combinations of the ports.
Please check your chosen variant with your local distributor.
All product specifications are subject to change without notice.
DS_UR5iv2_21032017
Cellular Routers
3G UMTS/HSPA+
UR5i v2 Series
SPECIFICATIONS
FIXED INTERFACES - BASIC VERSION
GPS SPECIFICATIONS *GPS is not available when the router is equipped with the LTE module 450 MHz!
1× Ethernet
10/100 Mbits, independent or bridged
Antenna
50 Ohms – active
1× SIM
SIM Card
Protocols
NMEA 0183 v3.0
1× I/O
Binary input/output
Frequency
1× USB
USB 2.0 Host, Type A
1575.42MHz
Tracking: -161dBm
Acquisition (Assisted): -158dBm
Acquisition (Standalone): -145dBm
Hot start: 1 s
Warm start: 29 s
Cold start: 32 s
Horizontal: < 2m (50 %); < 5m (90 %)
Altitude: < 4m (50 %); < 8m (90 %)
Velocity: < 0.2 m/s
Sensitivity
OPTIONAL INTERFACES
Ethernet (10/100Mbps), RS232, RS422/485, M-BUS
I/O Input/Output, Ethernet Switch (with PORT 2)
1× PORT 1
Acquisition time
ANTENNA CONNECTORS
2x SMA – 50 Ohm
Accuracy
FIXED INTERFACES - FULL VERSION
1× Ethernet
10/100 Mbits, independent or bridged
CPU & MEMORY
2× SIM
SIM Card
1× I/O
Binary input/output
CPU
32b ARM microprocessor, 0.25 DMIPS per MHz
1× USB
USB 2.0 Host, Type A
Flash memory
16 MB DDR SDRAM
RAM
64 MB
M-RAM
128 kB
OPTIONAL INTERFACES
1× PORT 1
Ethernet (10/100Mbps), RS232, RS422/485, M-BUS
I/O Input/Output, Ethernet Switch (with PORT 2)
1× PORT 2
RS232, RS422/485, M-BUS, WMBUS, WiFi
Ethernet Switch (with PORT 1)
1× Optional
2nd SIM card holder (“F” router versions)
ANTENNA CONNECTORS
Binary input
Binary output
Reed contact with trigger level 1.3 up to 1.4 V
100 mA/ max. 30 V
PARAMETERS - HSPA+ module
3× SMA – 50 Ohm
POWER
Source
9 - 36 VDC
Consumption
Idle - 2.6 W
GPRS - to 3.5 W (GPRS transmission)
UMTS - to 5.5 W (LTE transmission)
MECHANICAL
Dimension Plastic Version
I/O PORT (CNT)
HSPA+
Bit rate 14,4 Mbps (DL) / 5,76 Mbps (UL)
3GPP rel. 6/7 standard
Data compress 3GPP
UMTS
Bit rate 384 kbps (DL) / 384 kbps (UL)
3GPP rel. 4 standard
GPRS/EDGE
EDGE bit rate 237 kbps (DL) / 237 kbps(UL)
GPRS bit rate 85,6 kbps (DL) / 85,6 kbps(UL)
Multislot class 12, CS 1 to 4,
3GPP rel. 99/4 standard
Support channels
GSM/GPRS/EDGE: Quad band, 850/900/1800/1900 MHz
UMTS/HSDPA/HSUPA/HSPA+: Five band,
800/850/900/1900/2100 MHz
51 x 87 x 116mm
Dimension Metallic Version 42 x 87 x 113mm
Protection
IP30
Weight Plastic Version
150g
Weight Metallic Version
280g
ENVIRONMENTAL
Operating Temperature
-40 to +75°C
Storage Temperature
-40° to +85°C
Humidity
Operating - 0 to 95% relative humidity non condensing
Storage - 0 to 95% relative humidity non condensing
WIFI *optional (“F” router versions)
Antenna connector
R-SMA – 50 Ohms
Supported WiFi band
2.4 GHz
Standards
802.11b, 802.11g, 802.11n
2.4 GHz supported channels 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13
RX Sensitivity
11b, 11 Mbps: typ. -85 dBm
11g, 54 Mbps: typ. -70 dBm
(HT20) 11n, MSC7: typ. -66 dBm
(HT40) 11n, MSC7: typ. -62 dBm
TX Output Power
11b, 11 Mbps: min. 18, typ. 19, max. 20 dBm
11g, 54 Mbps: min. 14.5, typ. 16, max. 17.5 dBm
802.11n (HT20): min. 13.5, typ. 15, max. 16.5 dBm
802.11n (HT40): min. 13.5, typ. 15, max. 16.5 dBm
Type of device
Access point, station
orders@advantech-bb.com
support@advantech-bb.com
STANDARDS/REGULATION
Telecom and Emission
ETSI EN 301 511 V12.5.1, ETSI EN 300 440 V2.1.1, ETSI EN
301 908-1 V11.1.1, ETSI EN 301 908-2 V11.1.1, ETSI EN 300
328 V2.1.1, ETSI EN 300 220-2 V3.1.1
EMC
ETSI EN 301 489-1 V2.1.1, ETSI EN 301 489-3 V2.1.1, Draft
ETSI EN 301 489-52 V1.1.0, ETSI EN 301 489-17 V3.1.1
Safety
EN 60950-1:2006 + A11:2009 + A1:2010 + A12:2011 + A2:2013
+ AC:2011, EN 62311:2008
E-Mark – EMC for devices
in transportation
E-Mark homologation number: 10R – 04 7054
Corporate Headquarters: 707 Dayton Road, PO Box 1040 Ottawa, IL 61350 USA 815-433-5100 Fax 433-5104
European Office: Westlink Commercial Park, Oranmore Co. Galway Ireland +353 91 792444 Fax +353 91 792445
Cellular Routers
3G UMTS/HSPA+
UR5i v2 Series
SOFTWARE FEATURES
Linux based, possibility to program your own application
NTP client, NTP Server – time synchronization
SMS communication – AT commands on RS232, Ethernet and I/O
M-RAM memory inside – router statistic´s saving into memory
NETWORKING
DHCP – automatic IP addressing in LAN network
NAT/PAT – IP address and ports translation between inside/outside network
VRRP – virtual backup router function
DynDNS client – access to the router with a dynamic IP address
Dial-in – the ability to communicate over dial CSD call
PPPoE Bridge – PPP frames encapsulation inside ETH frames
DMZ - via iptables
VPN TUNNELING
IPsec, OpenVPN, L2TP – secure encrypted tunnels
CONFIGURATION AND DIAGNOSTIC
HTTP server – configuration via web server
Telnet – configuration and access to the file system
SNMP – router diagnostics, communication with I/O and M-Bus
GPRS state signalization by LED
On-line info on GSM signal status (level, cell, neighbors)
SMS info – power on, GPRS connection or disconnection
SMS control – on/off GPRS connection, switch SIM, I/O etc.
Transferred data counting, one more APN as backup
Remote router group configuration change, switching among configuration profiles
SSH – encrypted configuration and access to the file system
BASIC VERSION
1× SIM card holder, 1× optional port (PORT1)
FULL VERSION
2× SIM card holder, 2× optional port (PORT1,2)
PLASTIC VERSION
Ethernet 10/100
Optional
Back up of primary SIM
Optional
Optional
METALLIC VERSION
RS232, RS485, MBUS, Wi-Fi, CNT, W-MBUS
Ethernet 10/100, RS232, RS485, CNT, MBUS
Ethernet 10/100
2 or 3 port switch 10/100
orders@advantech-bb.com
support@advantech-bb.com
Corporate Headquarters: 707 Dayton Road, PO Box 1040 Ottawa, IL 61350 USA 815-433-5100 Fax 433-5104
European Office: Westlink Commercial Park, Oranmore Co. Galway Ireland +353 91 792444 Fax +353 91 792445
Cellular Routers
3G UMTS/HSPA+
UR5i v2 Series
ACCESSORIES
INCLUDED IN
PACKAGE
INCLUDED IN
SET PACKAGE
SOLD
SEPARATELY
ORDER CODE
DESCRIPTION
BB-SBD40
Metal DIN holder for Metal versions of routers v2
a
a
a
BB-CPD2-G
Plastic DIN holder for Plastic versions of routers v2
a
a
a
BB-TG.09.0113
Antenna GSM/UMTS stick 2dB - Penta-band, SMA-M connector
a
a
BB-AO-AUMTS-M3S
Antenna GSM/UMTS magnetic 3dB - Quad-band, 3m cable, SMA-M connector
a
a
a
a
a
a
BB-AO-AGSM-MG9S
Antenna GSM/UMTS magnetic 9dB - Quad-band, 3,5m cable, SMA-M connector
BB-AW-A24G-M5SRP
Antenna WiFi stick 5dB, SMA-RP connector
BB-AP-AGNSS-SMA
Antenna GPS/GLONASS, active (3V), magnetic, 33 - 34dB, 3m cable + SMA connector
BB-KD-ETH
Ethernet cross cable 1.5m
a
a
BB-CON-WR3
3-pin terminal block for I/O
a
BB-CON-WR2
2-pin Terminal block for Power Supply
a
a
a
a
BB-RPS-v2-WR2-EU
Power supply with WR connector (2 pins) - 12V/1A - EU plug
a
a
BB-RPS-v2-WR2-US
Power supply with WR connector (2 pins) - 12V/1A - US plug
a
a
BB-RPS-v2-WR2-UK
Power supply with WR connector (2 pins) - 12V/1A - UK plug
a
a
BB-RPS-v2-WR2-AUS
Power supply with WR connector (2 pins) - 12V/1A - AUS plug
a
a
Quick Start Guide
a
Router Management Software consisting of two parts:
R-SeeNet Server application can be programmed to automatically send SNMP
queries (Simple Network Management Protocol) to each router defined in the
network. The application retrieves status information from the routers and
records it in the SQL database.
R-SeeNet PHP is a web-based application that accesses the SQL database and
provides the network administrator detailed information on individual routers
and network health.
orders@advantech-bb.com
support@advantech-bb.com
a
SmartWorx HUB takes management of your devices to new levels of flexibility and
efficiency. Giving you a complete view of your installed device population, SmartWorx
Hub delivers invaluable configuration, diagnostic and management facilities directly to
your desktop, wherever you are.
Manage a single device or your entire device population at the same time. Whether you
need to modify configuration parameters, download or upgrade installed firmware and
applications or view detailed information regarding network statistics, you can do it all
from any location.
Corporate Headquarters: 707 Dayton Road, PO Box 1040 Ottawa, IL 61350 USA 815-433-5100 Fax 433-5104
European Office: Westlink Commercial Park, Oranmore Co. Galway Ireland +353 91 792444 Fax +353 91 792445
Download PDF
Similar pages