DMPS3-4K-50
3-Series® 4K DigitalMedia™ Presentation System 50
>> Ultra high-definition, multi-format
presentation switcher, scaler, audio DSP,
and control system
>> Out of the box Crestron Connect It™
collaboration system functionality
>> Supports up to four TT-100 series
Crestron Connect It Cable Caddies [1]
>> Built-in .AV Framework™ delivers a
fully-functional system without
any programming [3]
>> Integrated 3-Series Control System®
allows fully-programmable room control
>> Includes four auto-switching HDMI®, VGA, and
stereo analog audio inputs [6]
>> Also supports Dual-Mode DisplayPort, DVI, and analog
video sources [4,5]
>> Input auto-detection configures each input automatically
>> QuickSwitch HD™ technology manages HDCP keys for fast,
reliable switching
>> Performs automatic AV signal format management via EDID
>> Provides adjustable input level compensation on each audio input
>> Provides a single HDMI output
>> Features a built-in, high-performance 4K scaler
>> Upscales input signals to match the native resolution of any
screen — including 4K and Ultra HD displays!
>> Downscales 4K, UHD, and ultra high-resolution computer signals
to fit 1080p and other lower-resolution displays
>> Handles any input resolution from standard NTSC 480i or
PAL 576i, to UHD and 4K
>> Provides intelligent frame rate conversion, content-adaptive
noise reduction, and motion-adaptive de-interlacing
>> Provides 3D to 2D signal conversion, and passes 3D video
(without scaling) to 3D displays [7]
>> Provides a balanced stereo audio output with graphic EQ,
limiting, and delay
>> Enables analog-to-HDMI audio embedding and de-embedding [6]
>> Handles Dolby® TrueHD, Dolby Atmos®, DTS-HD®, and
uncompressed 7.1 linear PCM audio [8]
>> Includes onboard IR, RS-232, and Cresnet® control ports
>> Supports Crestron® touch screens, keypads, and wireless remotes
>> Supports XPanel with Smart Graphics® computer and web
based control
>> Supports iPhone®, iPad®, and Android™ control apps
>> Supports universal remotes via built-in RC-5 compatible IR receiver
>> Communicates natively with Crestron Fusion®
>> Enables IT-friendly network integration via SNMP
>> Includes front panel controls for switching and volume adjustment
>> Includes customizable front panel label strips
>> Allows complete AV setup and adjustment via a web browser
>> Features an internal universal power supply for
worldwide compatibility
>> Mounts under the table or in a single 19” rack space
crestron.com
| 800.237.2041
The DMPS3-4K-50 from Crestron® provides an ultra high-definition
presentation switcher and control solution that’s perfect for huddle rooms,
conference rooms, and classrooms. It integrates the control system,
multi-format switcher, 4K video scaler, and audio DSP all into one compact
device that mounts conveniently under a conference table or in an
equipment rack. Built-in Crestron Connect It™ functionality affords a
complete collaboration solution that’s easy and affordable to deploy in
any small to medium sized meeting space. Without requiring any
programming, the DMPS3-4K-50 is easily configurable for a variety of
media presentation applications.
Auto-switching HDMI®, VGA, and analog audio inputs provide the
essential connectivity needed to manage multiple computers and other
media sources. The selected input source is routed to one HDMI output
and one stereo analog audio output. Built-in 4K scaling ensures the highest
possible image quality, and compatibility with the widest range of sources
and displays.
4K Ultra HD
The DMPS3-4K-50 handles 4K and Ultra HD video signals, which is
essential to ensure support for the latest generation of computers and
monitors with native resolutions beyond 1080p and WUXGA.
Crestron Connect It™
Crestron Connect It is a cost-effective, simple-to-use presentation
solution that provides tabletop BYOD connectivity and one-touch control
for multiple participants around a conference table. Simply add up to four
Crestron Connect It Cable Caddies (TT-100 series [1]) to the DMPS3-4K-50.
Its auto-switching inputs support individual HDMI, VGA, and analog audio
connections at each cable caddy. Four USB ports on the DMPS3-4K-50
provide power and communications for each cable caddy.
A fully functional Crestron Connect It system is enabled right out of the
box by simply connecting the cable caddies and input cables. Additional
settings and AV adjustments are available through a simple web browser
setup screen. In addition to the Crestron Connect It devices, the DMPS34K-50 can also accommodate an AirMedia® Presentation Gateway without
any additional programming.[2]
DMPS3-4K-50 3-Series® 4K DigitalMedia™ Presentation System 50
DMPS3-4K-50 — Rear View
No Programming Required!
Installing the DMPS3-4K-50 is easy, fast, and affordable. Built-in
.AV Framework™ technology delivers a fully-functional presentation
system with simplified configuration and a choice of control options and
other add-ons. For complete details on the capabilities supported by
.AV Framework, please visit: www.crestron.com/avframework.[3]
Multi-Format Auto-Switcher
The DMPS3-4K-50 provides high-performance automatic switching
between four groups of inputs, each including HDMI, VGA, and unbalanced
stereo audio. The HDMI inputs are compatible with DVI and Dual-Mode
DisplayPort sources, and the VGA inputs can handled RGB, composite,
S-Video, and component video sources. Digital audio is supported by the
HDMI inputs, plus each analog audio input may be used in combination
with its corresponding VGA or HDMI video input. Input auto-detection
eliminates the need to configure the inputs — simply connect your source
and the DMPS3-4K-50 selects the right audio and video combination.[4,5,6]
4K Scaler
With its high-performance 4K video scaler on board, the DMPS3-4K-50
ensures an optimal image from every video source. It allows all types of
video and computer sources to be viewed reliably and look their best on
any display up to 4K. It accepts any input resolution, from standard
definition NTSC 480i to ultra high-definition DCI 4K, and scales it perfectly
to match the native resolution of any screen up to DCI 4K (4096 x 2160).
Interlaced sources are converted to progressive scan using motionadaptive deinterlacing. Intelligent frame rate conversion enables support
for 24p and PAL format sources. And, 3D to 2D conversion allows 3D
content to be viewed on 2D-only displays.[7]
Flexible Audio Outputs
The switched audio signal is routed to the HDMI output as well as to a
separate balanced analog audio output, with individual level adjustments
provided for each output. All inputs and outputs support stereo audio, with
the option to configure the analog output for mono. Dolby® TrueHD,
Dolby Atmos®, DTS-HD®, and 7.1 linear PCM audio signals can also be
routed through the HDMI inputs and output.[8]
Professional Audio DSP
The analog audio output includes professional digital signal processing,
allowing the signal to be adjusted for optimum performance and sound
quality. The analog output is ideally designed to be connected to an
external power amplifier and used to drive a set of ceiling or wall mount
speakers. In addition to volume, bass, treble, and mute controls, the DSP
provides 10-band graphic equalization, fully-adjustable limiting, and up
to 80 ms of delay. All settings are adjustable using the DMPS3-4K-50’s
web browser user interface for easy setup. The output volume level is also
adjustable using the front panel volume knob.
crestron.com
| 800.237.2041
EDID Format Management
The DMPS3-4K-50 provides comprehensive management of the EDID
(Extended Display Identification Data) information that passes between
display devices and input sources, ensuring that each source gets
displayed at its optimal resolution and format. Most applications require
no changes to the default settings. For applications requiring custom
configuration, the DMPS3-4K-50 allows for easy assessment of each
device’s format and resolution capabilities, with the ability to configure
signals appropriately for the most desirable and predictable behavior.
QuickSwitch HD™ Technology
Handling digital media signals means handling HDCP (High-bandwidth
Digital Content Protection), the encryption scheme used by content
providers to protect their DVDs, Blu-ray™ discs, and broadcast signals
against unauthorized copying. Viewing HDCP encrypted content requires a
source device to “authenticate” each display and signal processor in the
system and issue it a “key” before delivering an output signal. Crestron
QuickSwitch HD manages these keys to ensure fast, reliable switching and
immunity to “blackouts.”
Integrated 3-Series Control System®
Its built-in 3-Series control system enables the DMPS3-4K-50 to provide
complete, customizable control of every AV device, as well as room
lighting, window shades, and projection screens, without requiring a
separate control processor. Onboard control ports include one IR port
and one RS-232 COM port, as well as Cresnet® and Ethernet. The
DMPS3-4K-50 supports the full line of Crestron touch screens, keypads,
and wireless remotes for a user experience custom tailored to the specific
requirements of each end-user. Support for Crestron control apps and
Crestron Fusion® delivers the industry’s most powerful platform for
remotely controlling and managing multiple rooms using computers and
mobile devices.
CEC Embedded Device Control
For controlling third-party AV devices, the DMPS3-4K-50 provides an
alternative to conventional IR, RS-232, and Ethernet by harnessing the
CEC (Consumer Electronics Control) signal embedded in HDMI. Using CEC,
many devices can be controlled right through their HDMI connections,
eliminating the need for any dedicated serial cables or IR emitters.
DMPS3-4K-50 3-Series® 4K DigitalMedia™ Presentation System 50
SPECIFICATIONS
Maximum Scaler Input Resolutions: Operating System
Input Type
Crestron 3-Series; real-time, preemptive, multi-threaded/multitasking
kernel; Transaction-Safe Extended FAT file system; supports up to 10
simultaneously running programs; preloaded DMPS3 .AV Framework Base
Program; out-of-the-box “Crestron Connect It” functionality
HDMI
24 Hz
4:4:4
30 bit
30 Hz
4:4:4
24 bit
Progressive
4096x2160 DCI 4K
or
3840x2160 4K UHD
30 Hz
4:2:2
36 bit
Interlaced
RGB/VGA
Communications
Component
Ethernet: 10/100 Mbps, auto-switching, auto-negotiating, auto-discovery,
full/half duplex, industry-standard TCP/IP stack, UDP/IP, CIP, DHCP, SSL,
TLS, SSH, SFTP (SSH File Transfer Protocol), FIPS 140-2 compliant
encryption, IEEE 802.1X, SNMP, BACnet™/IP [9], IPv4 or IPv6, Active
Directory authentication, IIS v.6.0 web server, SMTP e-mail client, RSTP,
Private Network Mode
Cresnet: Cresnet master mode
USB: USB host ports for Crestron Connect It devices and firmware update
via USB flash drive; USB device port for computer console (setup)
RS-232: 2-way device control and monitoring up to 115.2k baud with
hardware and software handshaking
IR/Serial: 1-way device control via infrared up to 1.2 MHz or serial TTL/
RS-232 (0-5 Volts) up to 115.2k baud; built-in RC-5 compatible IR receiver
HDMI: HDCP, EDID, CEC
NOTE: Supports management of HDCP and EDID; supports management
of CEC between the connected HDMI devices and the control system
[5]
Composite
or S-Video [5]
Progressive
Maximum Scaler Output Resolutions: Output Type
HDMI
Frame
Rate
Color
Color
Sampling Depth
Scan Type
Resolution
24 Hz
4:4:4
30 bit
30 Hz
4:4:4
24 bit
Progressive
4096x2160 DCI 4K
or
3840x2160 4K UHD
30 Hz
4:2:2
36 bit
2560x1600 WQXGA
60 Hz
4:4:4
36 bit
1920x1080 HD1080p
60 Hz
4:4:4
36 bit
crestron.com
| 800.237.2041
2560x1600 WQXGA
60 Hz
4:4:4
36 bit
1920x1080 HD1080p
60 Hz
4:4:4
36 bit
1920x1080 HD1080i
30 Hz
4:4:4
36 bit
1600x1200 UXGA
60 Hz
n/a
1920x1200 WUXGA
60 Hz
n/a
Progressive 1920x1080 HD1080p
60 Hz
n/a
Interlaced
1920x1080 HD1080i
30 Hz
n/a
Interlaced
480i NTSC
or 576i PAL
60 Hz
n/a
Frame
Rate
Color
Color
Sampling Depth
Maximum Pass-Through Resolutions: Input Type
HDMI
Scan Type
Resolution
Progressive
4096x2160 DCI 4K
or
3840x2160 4K UHD
Interlaced
RGB/VGA
Progressive
Video
Switcher: 8x1 (organized as multi-format 4x1), auto-switching, autodetecting multi-format digital/analog source inputs, QuickSwitch HD
technology
Scaler: 4K video scaler, motion-adaptive deinterlacer, intelligent frame
rate conversion, Deep Color support, 3D to 2D conversion [7], contentadaptive noise reduction, widescreen format selection (zoom, stretch,
maintain aspect-ratio, or 1:1)
Input Signal Types: HDMI w/Deep Color, 3D, & 4K (DVI & Dual-Mode
DisplayPort compatible [4]); RGB/VGA (RGBHV, RGBS, RGsB); component
(YPbPr); S-Video (Y/C); composite (NTSC, PAL) [5]
Output Signal Types: HDMI w/Deep Color, 3D, & 4K (DVI compatible [4])
Analog-To-Digital Conversion: 10-bit 165 MHz per each of 3 channels
Color
Color
Sampling Depth
Resolution
Control System Memory
SDRAM: 1 GB
Flash: 4 GB
Frame
Rate
Scan Type
Component
[5]
Composite
or S-Video [5]
24 Hz
4:4:4
30 bit
30 Hz
4:4:4
24 bit
30 Hz
4:2:2
36 bit
60 Hz
4:2:0
24 bit
2560x1600 WQXGA
60 Hz
4:4:4
36 bit
1920x1080 HD1080p
60 Hz
4:4:4
36 bit
1920x1080 HD1080i
30 Hz
4:4:4
1600x1200 UXGA
60 Hz
n/a
1920x1200 WUXGA
60 Hz
n/a
Progressive 1920x1080 HD1080p
36 bit
60 Hz
n/a
Interlaced
1920x1080 HD1080i
30 Hz
n/a
Interlaced
480i NTSC
or 576i PAL
60 Hz
n/a
NOTE: Common resolutions are shown; other custom resolutions are
supported at pixel clock rates up to 300 MHz for digital inputs and output,
or 165 MHz for analog inputs
Audio – General
Switcher/Mixer: 8x1 (organized as multi-format 4x1) stereo source
switcher, auto-detecting digital/analog source inputs, stereo DSP for
analog output, 4x1 multichannel source switcher, digital audio mixer
bypass mode for multichannel pass-through to digital output
Analog-To-Digital Conversion: 24-bit 48 kHz
Digital-To-Analog Conversion: 24-bit 48 kHz
Frequency Response: 20 Hz to 20 kHz ±0.5 dB
S/N Ratio: >108 dB, 1 kHz, A-weighted (digital source);
>103 dB, 1 kHz, A-weighted (analog source)
THD+N: <0.002%, 20 Hz to 20 kHz (digital source);
<0.005%, 20 Hz to 20 kHz (analog source)
DMPS3-4K-50 3-Series® 4K DigitalMedia™ Presentation System 50
Stereo Separation: >108 dB (digital source);
>103 dB (analog source)
Audio – Source Inputs
Typical of 8 source input channels (Audio Inputs 1 – 4, HDMI Inputs 1 – 4)
Input Signal Types: Analog 2-channel [6], HDMI (Dual-Mode DisplayPort
compatible [4])
Analog Formats: Stereo 2-channel
Digital Formats: Dolby Digital®, Dolby Digital EX, Dolby Digital Plus,
Dolby® TrueHD, Dolby Atmos®, DTS®, DTS-ES, DTS 96/24, DTS-HD High Res,
DTS-HD Master Audio, LPCM up to 8 channels [8]
Input Compensation: ±10.0 dB [8]
Audio – Analog Line Output
Output Signal Type/Format: Stereo 2-channel
Source: -80 to +10 dB Level adjustment range, plus Mute and Balance
Master Volume: -80 to +10 dB Level adjustment range, plus Mute
and Mono
Bass: ±12.0 dB
Treble: ±12.0 dB
Equalization: 10-band graphic
GEQ Center Frequencies: 31.5, 63, 125, 250, 500, 1k, 2k, 4k, 8k, 16k Hz
GEQ Gain: ±12.0 dB per band
Delay: 0.0 to 80.0 ms
Limiter Threshold: -80 to 0 dBz
Limiter Ratio: 1:1 to 10:1
Limiter Attack: 1 to 250 ms
Limiter Release: 1 to 1000 ms
Limiter Curve: Hard or soft knee
Audio – Digital Output
Output Signal Types: HDMI
Formats: Dolby Digital, Dolby Digital EX, Dolby Digital Plus, Dolby TrueHD,
Dolby Atmos, DTS, DTS-ES, DTS 96/24, DTS-HD High Res, DTS-HD Master
Audio, LPCM up to 8 channels [8]
Source: -80 to +10 dB Level adjustment range, plus Mute and Balance [8]
Master Volume: -80 to +10 dB Level adjustment range, plus Mute [8]
Connectors – Audio/Video Inputs
VGA IN 1 – 4: (4) HD15 female;
Analog VGA/RGB/video inputs;
Signal Types: VGA, RGB, component, S-Video, or composite [5];
Formats: RGBHV, RGBS, RGsB, YPbPr, Y/C, NTSC or PAL;
Input Level: 0.5 to 1.5 Vp-p with built-in DC restoration;
Input Impedance: 75 Ohms nominal;
Sync Detection: RGBHV, RGBS, RGsB, YPbPr;
Sync Input Level: 3 to 5 Vp-p;
Sync Input Impedance: 2.2k Ohms
crestron.com
| 800.237.2041
AUDIO IN 1 – 4: (4) 3.5 mm TRS mini phone jacks;
Unbalanced stereo line-level analog audio inputs;
Input Impedance: 32k Ohms unbalanced;
Maximum Input Level: 2.8 Vrms unbalanced;
Note: If an HDMI input is selected but no digital audio signal is detected, the
corresponding analog audio input is activated (AUDIO 1 for HDMI 1, etc.).
Please note, the analog audio inputs do not pass audio if the HDMI video
input resolution is higher than 1920x1200.
HDMI IN 1 – 4: (4) 19-pin Type A HDMI female;
Digital video/audio inputs;
Signal Types: HDMI, DVI, or Dual-Mode DisplayPort [4]
Connectors – Audio/Video Outputs
HDMI OUT: (1) 19-pin Type A HDMI female;
Digital video/audio output;
Signal Types: HDMI, DVI [4]
AUDIO OUT: (1) 5-pin 3.5 mm detachable terminal block;
Balanced/unbalanced stereo line-level audio output;
Output Impedance: 200 Ohms balanced, 100 Ohms unbalanced;
Maximum Output Level: 4 Vrms balanced, 2 Vrms unbalanced
Connectors - Control & Power
IR OUT: (1) 3.5 mm mini-phone jack;
IR/Serial output port;
IR output up to 1.2 MHz;
1-way serial TTL/RS-232 (0-5 Volts) up to 115.2k baud
COM: (1) 5-pin 3.5 mm detachable terminal block;
Bidirectional RS-232 port;
Up to 115.2k baud, hardware and software handshaking support
LAN: (1) 8-pin RJ45 female;
10Base-T/100Base-TX Ethernet port
USB 1 – 4: (4) USB Type A female;
USB 2.0 host ports for TT-100 series Crestron Connect It Cable Caddies [1];
Also enables firmware update via USB flash drive
G: (1) 6-32 screw, chassis ground lug
NET: (1) 4-pin 3.5 mm detachable terminal block;
Cresnet Master port;
Available Cresnet Power: 24 Watts
100-240V~1.4A 50/60Hz: (1) IEC 60320 C14 main power inlet;
Mates with removable power cord, included
COMPUTER (front): (1) USB Type B female;
USB computer console port;
For setup only
IR IN (front): (1) Infrared sensor;
IR Frequency: 36 to 38 kHz;
IR Formats: Crestron format, RC5;
Allows control from IR wireless remotes using the Crestron or RC-5
command sets
DMPS3-4K-50 3-Series® 4K DigitalMedia™ Presentation System 50
Controls & Indicators
MODELS & ACCESSORIES
PWR: (1) Bi-color green/amber LED, indicates operating power supplied
from AC line power, turns amber while booting and green when operating
NET: (1) Yellow LED, indicates Cresnet bus activity
MSG: (1) Red LED, indicates internal control system has generated an
error message
HW-R: (1) Recessed pushbutton for hardware reset, reboots the
control system
SW-R: (1) Recessed pushbutton for software reset, restarts the
software program
AUTO INPUT SELECT: (1) Pushbutton and bi-color green/amber LED,
selects auto-switching mode
VGA INPUT SELECT 1 – 4: (4) Pushbuttons for manual input selection,
and (4) bi-color green/amber LEDs to indicate the current active input and
signal presence at each corresponding VGA input
HDMI INPUT SELECT 1 – 4: (4) Pushbuttons for manual input selection,
and (4) bi-color green/amber LEDs to indicate the current active input and
signal presence at each corresponding HDMI input
VOLUME: (1) Continuous turn rotary encoder, adjusts the analog audio
output volume
LAN (rear): (2) LEDs, bi-color LED (left) indicates Ethernet speed and
activity, green LED (right) indicates Ethernet link status
Available Models
Power
Main Power: 1.4 Amps @ 100-240 Volts AC, 50/60 Hz
Power Consumption: 33 Watts typical, 26 Watts idle
Available Cresnet Power: 24 Watts
Environmental
Temperature: 41° to 104° F (5° to 40° C)
Humidity: 10% to 90% RH (non-condensing)
Heat Dissipation: 112 BTU/hr typical, 88 BTU/hr idle
Enclosure
Chassis: Metal, black finish, fan-cooled, vented sides
Front Panel: Metal, black finish with polycarbonate label overlay
Mounting: Freestanding, 1 RU 19-inch rackmount, or under-table mount
(adhesive feet, rack ears, and under-table mounting brackets included)
Dimensions
Height: 1.74 in (45 mm) without feet
Width: 17.28 in (439 mm);
18.94 in (482 mm) with rack ears
Depth: 10.47 in (266 mm)
Weight
6.4 lb (2.9 kg)
DMPS3-4K-50: 3-Series® 4K DigitalMedia™ Presentation System 50
Available Accessories
TT-100 Series: Crestron Connect It™ Cable Caddy
TSW-760: 7” Touch Screen
TSW-1060: 10.1” Touch Screen
MP-B10: Media Presentation Button Panel B10
AM-101: AirMedia® Presentation Gateway
MP-AMP30: Media Presentation Audio Amplifier
MP-AMP40 Series: Media Presentation Audio Amplifiers, 70 or 100 Volt
AMP Series: Commercial Power Amplifiers
USB-EXT-DM: USB over Ethernet Extender with Routing
GLS-ODT-C-CN: Dual-Technology Occupancy Sensor with Cresnet®
GLS-OIR-C-CN: Passive Infrared Occupancy Sensor with Cresnet®
Crestron Fusion®: Enterprise Management Platform
Crestron® App: Control App for Apple® iOS® & Android™
XPanel: Crestron Control® for Computers
3-Series® BACnet™/IP Support: 3-Series Native BACnet/IP Interface
License
CSP-LIR-USB: IR Learner
STIRP: IR Emitter Probe w/3.5mm Mini Phone Plug
CNSP-XX: Custom Serial Interface Cable
CRESNET: Cresnet® Control Cable
CBL Series: Crestron® Certified Interface Cables
MP-WP Series: Media Presentation Wall Plates
MPI-WP Series: Media Presentation Wall Plates - International Version
Notes:
1. Item(s) sold separately.
2. The AirMedia Presentation Gateway, model AM-101 (sold separately), requires one HDMI input
on the DMPS3-4K-50.
3. Some features and functions described in this spec sheet may not be supported using
.AV Framework. For a complete list of capabilities and options supported by .AV Framework,
please visit: www.crestron.com/avframework.
4. HDMI connections require an appropriate adapter or interface cable to accommodate a DVI or
Dual-Mode DisplayPort signal. CBL-HD-DVI interface cables are available separately.
5. The VGA inputs can accept component, composite, and S-Video signals using an appropriate
adapter (not included). However, input sync detection is not provided for composite or S-Video
signal types.
6. When using an analog audio input in combination with an HDMI video input, the source’s
video resolution must be 1920x1200 or lower. The analog audio input will not pass audio if the
source’s video resolution is higher than 1920x1200.
7. Automatically passes 3D video if the display device supports it (reverts to pass-through mode
without scaling). Provides automatic 3D-to-2D conversion (with scaling) if the display device
does not support 3D.
8. Routing of a multichannel audio signal via a digital input and output requires the input to be set
for “mixer bypass” mode. When that input is selected, all audio controls on the digital output
are disabled. Mixer bypass mode also disables the Input Compensation control on that input.
9. License required. The DMPS3-4K-50 supports a maximum of 500 BACnet objects when
dedicated for BACnet use only. Actual capabilities are contingent upon the overall program size
and complexity.
This product may be purchased from an authorized Crestron dealer. To find a dealer, please
contact the Crestron sales representative for your area. A list of sales representatives is available
online at www.crestron.com/salesreps or by calling 800-237-2041.
crestron.com
| 800.237.2041
DMPS3-4K-50 3-Series® 4K DigitalMedia™ Presentation System 50
The specific patents that cover Crestron products are listed online at: patents.crestron.com.
Certain Crestron products contain open source software. For specific information, please visit
www.crestron.com/opensource.
Crestron, the Crestron logo, 3-Series, 3-Series Control System, AirMedia, .AV Framework,
Cresnet, Crestron Connect It, Crestron Control, Crestron Fusion, DigitalMedia, QuickSwitch HD,
and Smart Graphics are either trademarks or registered trademarks of Crestron Electronics, Inc.
in the United States and/or other countries. BACnet and the BACnet logo are either trademarks
or registered trademarks of American Society of Heating, Refrigerating and Air-Conditioning
Engineers, Inc. in the United States and/or other countries. Apple, iPad, and iPhone are either
trademarks or registered trademarks of Apple Inc. in the United States and/or other countries.
Blu-ray is either a trademark or registered trademark of the Blu-ray Disc Association in the United
|
Crestron Electronics, Inc. 15 Volvo Drive Rockleigh, NJ 07647
Tel: 800.237.2041 / 201.767.3400
www.crestron.com
| Fax: 201.767.1903
States and/or other countries. Dolby, Dolby Atmos, and Dolby Digital are either trademarks or
registered trademarks of Dolby Laboratories in the United States and/or other countries. DTS and
DTS-HD are either trademarks or registered trademarks of DTS, Inc. in the United States and/or
other countries. IOS is either a trademark or registered trademark of Cisco Technology, Inc. in
the United States and/or other countries. Android is either a trademark or registered trademark
of Google, Inc. in the United States and/or other countries. HDMI and the HDMI Logo are either
trademarks or registered trademarks of HDMI Licensing LLC in the United States and/or other
countries. Other trademarks, registered trademarks, and trade names may be used in this
document to refer to either the entities claiming the marks and names or their products. Crestron
disclaims any proprietary interest in the marks and names of others. Crestron is not responsible
for errors in typography or photography. Specifications are subject to change without notice.
©2017 Crestron Electronics, Inc.
All brand names, product names and trademarks are the property of their respective owners.
©2017 Crestron Electronics, Inc.
Specifications subject to change without notice. Revised 05/08/17
Download PDF
Similar pages