CO-LR
Night Vision Clip-On System
The Armasight CO-LR (Clip On – Long Range) is a night vision unit that mounts in front of an existing
day scope, and converts the day scope to night vision capability up to ranges of 1000 yards.
Suitable for use with most commercial and military specification day time sights, telescopes or
binoculars (up to 12X magnification), the CO-LR can be mounted/dismounted on a standard
Picatinny rail in seconds, and with no tools required. Because the CO-LR is mounted in front of your
own day scope, the shooters eye relief is not altered, and shot release and follow through all remain
intuitive – because the unit is factory bore-sighted to better than 1MOA accuracy, no alteration in
zero is experienced, so it really is as simple as mount-focus-shoot, just as in day time.
The Armasight CO-LR is intended primarily for use by the most demanding hunter or long range
target shooter, but with a build quality that makes it capable of so much more -its MIL-STD-810
housing is designed to take just about anything the great outdoors can throw at it. The CO-LR is
packed with innovative features like variable gain control, bright light shut-off, wireless remote
control. This night vision clip on is designed to make long range night shooting just as easy and
accurate as shooting over the same terrain during daylight hours with your day scope alone.
Whether your day scope is a well known brand or not, the Armasight CO-LR will work just as well at
magnifications anywhere from 3X to 12X. The Armasight CO-LR is available in a variety of high
performing Gen 2+ and Gen 3 image tube options to cater for all budgets; the CO-LR brings very
high quality clip-on night vision within everyone’s reach.
Simple and quick conversion of daytime scope, sight or binoculars to Night Vision
Mounts in front of riflescope with no re-zeroing required
Equipped with Wireless Remote Control
Variable Gain Control
Powered by a single alkaline 1.5V AA or 3V CR123A lithium battery
Low Battery Indicator
Quick Release Mount
Bright Light Cut-off System
Mil Standard Compliant
Limited Two-Year Warranty
Image Tube
Magnification
Lens System
FOV (°)
Exit Pupil (mm)
Range of Focus (m)
Diopter Adjustment
Controls
Remote Control
Variable Gain Control
Bright Light Cut-off
Infrared Illuminator
Low Battery Indicator
Power Supply
Battery Life (hours)
Environmental Rating
MIL-STD-810
Operating Temperature (°C)
Storage Temperature (°C)
Dimensions (mm/in)
Weight (kg/lbs)
Copyright 2011 - Armasight Inc.
Gen 2+ SD - "Standard Definition", 45-51 lp/mm
Gen 2+ ID - "Improved Definition", 45-64 lp/mm
Gen 2+ HD - "High Definition", 51-72 lp/mm
Gen 2+ QS - "QuickSilver" White Phosphore, 51-72 lp/mm
Gen 3 Bravo - "Bravo Grade", 62-72 lp/mm
Gen 3 Alpha - "Alpha Grade", 64-72 lp/mm
Gen 3 P - ITT PINNACLE® Thin-Filmed Auto-Gated, 64-72 lp/mm
1x (recommended to use with up to 12x day time optics)
F1:1.54, 108 mm
9
40
10 to infinity
No
Direct
Yes (Wireless)
Yes
Yes
Detachable Long Range IR Illuminator
Yes
1 x 1.5V AA type battery or 1 x 3V CR123A type battery
40 ( 3 V ) / 25 (1. 5 V )
Waterproof
Complies
-40 to +50
-50 to +50
235 x 97x 80 / 9.25 x 3.8 x 3.14
0.91 / 2
www.armasight.com
Download PDF
Similar pages