TC1994 SIP Easy Connect: SIP Trunk Profile Import/Export

Technical Bulletin
Alcatel-Lucent OmniPCX Office
TC1994 ed.03
Release 10.0 and above
SIP Easy Connect: SIP Trunk Profile
Import/Export
This document details the feature "SIP Easy Connect" which permits to manage SIP Trunk profiles in OMC.
Revision History
Edition 01: December 12, 2014
Edition 02: February 12, 2016
Edition 03: November 15, 2016
first RCE100 edition released for publication
the doc is restructured and also introduces the profile config parameters proper to OXO
RCE101 and RCE102
Document modification to take into account OXO Connect 2.0
Legal notice:
The information presented is subject to change without notice.
ALE International assumes no responsibility for inaccuracies contained herein.
Copyright © ALE International 2016
Table of contents
1 General .................................................................................................................................................. 3
1.1 References ....................................................................................................................................... 3
1.2 Scope of the document ..................................................................................................................... 3
2 SEC for the context of ALE-supported SIP Trunk Solutions ......................................................................... 4
3 SIP Profile Data ....................................................................................................................................... 5
3.1 Control Data ..................................................................................................................................... 5
3.2 SIP Trunk configuration Data ............................................................................................................. 5
4 SIP Profile Import with RCE 10.3 OMC ...................................................................................................... 6
4.1 Data management ............................................................................................................................ 6
4.2 User Procedure ................................................................................................................................. 7
5 SIP Profile Import with OXO Connect 2.X OMC .......................................................................................... 9
5.1 Data management ............................................................................................................................ 9
5.1.1 Addition mode ............................................................................................................................ 9
5.1.2 Replacement mode ..................................................................................................................... 9
5.1.3 Start Over mode ....................................................................................................................... 10
5.1.4 Field “Overwriting of VoIP parameters” ...................................................................................... 10
5.2 User Procedure ............................................................................................................................... 11
6 SIP Profile Export .................................................................................................................................. 14
6.1 Procedure ....................................................................................................................................... 14
7 Appendix: SIP profile config parameters ................................................................................................. 17
Alcatel-Lucent OmniPCX Office - Release 10.0 and above
SIP Easy Connect: SIP Trunk Profile Import/Export
Copyright © ALE International 2016
TC1994 ed.03
page 2/20
1 General
"SIP Easy Connect" (SEC) is the user-friendly name given to the Import/Export feature of OMC for the part
dedicated to SIP Profiles data. The feature is a configuration helper for SIP Trunk solutions.
This guide focuses the practical usage of SEC for the context of managed public SIP Trunks approved by
Alcatel-Lucent Enterprise (ALE). As a secondary usage, SEC can be used for creating and managing "private"
SIP profiles (not supported by ALE) for the deployment of private SIP Trunk solutions.
Warning
SIP Easy Connect is available since OmniPCX Office Release 10.0.
1.1 References
Alcatel-Lucent doc available from the Business Partner portal (https://businessportal2.alcatel-lucent.com):
[1] Alcatel-Lucent OmniPCX Office Communication Server- Expert Documentation
[2] Alcatel-Lucent OmniPCX Office Technical Bulletin- TC1284 Public SIP Trunking
[3] Alcatel Lucent OmniPCX Office Technical Bulletin- TCXXXX Configuration Guideline
1.2 Scope of the document
The doc is intended for field engineers who are familiar with OMC and with the basic set up of the OmniPCX
Office. For simplification reasons, the OMC menus and screenshots correspond to the English language
selected in the application.
Alcatel-Lucent OmniPCX Office - Release 10.0 and above
SIP Easy Connect: SIP Trunk Profile Import/Export
Copyright © ALE International 2016
TC1994 ed.03
page 3/20
2 SEC for the context of ALE-supported SIP Trunk Solutions
Note
SEC permits to simplify drastically the SIP configuration task in OMC and also limits the risk of manual
errors. For the deployment of approved solutions with a public SIP Provider, the user operation is very basic
and is no more than importing the profile file delivered by ALE (operation detailed at Ch.4).
Since OXO R10.0, the delivery of SIP profiles is part of the support service ensured by ALE for approved public
SIP Trunk solutions. The support is based on the reference elements of the process which are
published on the ALE Web portal and reminded hereafter:
1) The bulletin TC1284 (i.e. doc "Public SIP Trunking Interoperability and Technical Support Procedure"):
this doc gives the worldwide and up-to-date list of approved solutions in GA or LA support mode and
defines the conditions for these two support modes. For GA solutions, the doc reminds the reference of the
associated ALE guide.
2) The TCxxxx guides proper to a GA SIP solution (i.e. doc "SIP Trunk Solution xx Configuration
Guideline"): every guide describes its reference OXO configuration and environment plus the list of
supported terminals and features. For recent solutions with OXO >= R10.0, the doc is built on the SEC
facility described in the present document.
3) The ALE archive of SIP Trunk profiles (i.e. archive “ALE_RCE10X_SIP_profiles_edxx.zip” hosting the
“.spf” profile files): this archive presents two main sub-directories:
 The GA folder gathers all approved GA SIP profiles of the different OXO releases >= R10.0. The
usage of GA SIP profiles is free for the deployment of managed SIP solutions that respect
the ALE dedicated guide. The GA support conditions are described in the doc TC1284.

Warning
The LA folder contains a batch of LA SIP profiles which are all intended for the last OXO commercial
release. The usage of LA SIP profiles is reserved for Pilot sites and is submitted to the LA
support conditions described in TC1284 Ch. 2.2.
The current valid edition of these reference elements is found directly on the ALE Web Portal
(https://businessportal2.alcatel-lucent.com).
 The Technical Bulletin TC 1284 is located in the section “Customer Support” / “Technical Support” /
“Technical Documentation Library”.
The "ALE_RCE10X_SIP_Profiles_.." zip file is located in the section “Customer Support” / “Technical
Support” / “Software Download” within the directory of last OXO R10.3 commercial Release
Or
The "ALE_CNX2X_SIP_Profiles_.." zip file is located in the section “Customer Support” / “Technical
Support” / “Software Download” within the directory of last OXO Connect commercial Release
Alcatel-Lucent OmniPCX Office - Release 10.0 and above
SIP Easy Connect: SIP Trunk Profile Import/Export
Copyright © ALE International 2016
TC1994 ed.03
page 4/20
3 SIP Profile Data
Warning
A SIP Trunk Profile is materialized by a “.spf” file and is dedicated to a specific OXO Release
(the profile file cannot be imported if the system has another Release version).
The profile data embedded within a .spf file has a binary format and is therefore not readable with a text
editor application. This data is classified in two different categories (Control data and SIP Trunk configuration
data) which are described in the next sections:
3.1 Control Data
This data is used internally by OMC and OXO as control data:
 OXO firmware version
 OMC version
 Profile Version Identifier: the version ID of a spf file is automatically controlled by OMC in regard
to the OXO system release it is connected to (in on-line or off-line mode).
 Profile name: this is a label defined by the user who creates the SIP profile (see the SEC export
operation at Ch. 5). The label is generally assigned the name of the SIP Provider: it is prompted at the
beginning of an import operation as a way to confirm the role of the profile loaded (i.e. independently
of the name given to the spf file).
3.2 SIP Trunk configuration Data
This data is the useful payload of the SIP profile and corresponds to the OMC parameters listed as
appendix at Ch.6. These config parameters are not visible directly in the profile file but can only be read
after a successful SEC Import. After the import, the parameters can be checked in the related OMC SIP
screens (refer to Ch. 6 tables) or more simply from a single text file exported via the OMC menu “ImportExport Data/sip SIP Trunk” (refer to doc TC1945 "OMC Export Of SIP Trunk Data" for more details).
Alcatel-Lucent OmniPCX Office - Release 10.0 and above
SIP Easy Connect: SIP Trunk Profile Import/Export
Copyright © ALE International 2016
TC1994 ed.03
page 5/20
4 SIP Profile Import with RCE 10.3 OMC
SEC Import function is foremost intended to the configuration of ALE-approved SIP Trunk solutions. In such
context, the import must be carried out in accordance with the ALE guide dedicated to the solution. That guide
also describes the manual OMC tuning which is necessary to complete the configuration of the solution.
4.1 Data management
Warning
Importing a SIP trunk profile is normally intended for “from scratch” configuration of the
system otherwise, the user may need to redo part of the overwritten configuration as
explained here below.
The SEC Import can be done in OMC on-line or off-line mode. During the operation, the existing system
configuration is altered in the following way:

The “VoIP parameters” and “Noteworthy addresses” listed in ch.7 are overwritten.

The “ARS/Gateway Parameters” tables are all deleted. A new entry table (with index 1) is
created from the SIP Profile data.

The “ARS/SIP Public Numbering” tables are all deleted. A new entry (with index 1) is created
from the SIP Profile data.

The “ARS/Automatic Routing: Prefixes” entry lines are all deleted.

The “ARS/SIP Accounts” entry lines are maintained. However, for all entries, the value in the
column “Gateway parameters Index‟ is cleared (empty value).
Warning
Once the import is achieved successfully, a manual system reset must be completed: the user
is notified for that but can postpone the operation if necessary.
Warning
When the SIP profile has been imported, there is no mean to automatically rollback the system
database to the previous configuration.
Alcatel-Lucent OmniPCX Office - Release 10.0 and above
SIP Easy Connect: SIP Trunk Profile Import/Export
Copyright © ALE International 2016
TC1994 ed.03
page 6/20
4.2 User Procedure
With OMC R10.3 connected to an OmniPCX Office system = R10.x:
 Select “Import/Export ” and then “Import/Export Data ”
 Select “spf SIP Tunk Profile ” in the “Data Type ” pick list
 Push the “File” button then, select on your PC location the reference “.spf ” file of the required public
SIP Provider and then, click “OK ” button.
Alcatel-Lucent OmniPCX Office - Release 10.0 and above
SIP Easy Connect: SIP Trunk Profile Import/Export
Copyright © ALE International 2016
TC1994 ed.03
page 7/20
 Finally, push the “Import ” button and click “OK ” to start the import process
After a while, when the operation is completed, a pop-up window is prompted:
Alcatel-Lucent OmniPCX Office - Release 10.0 and above
SIP Easy Connect: SIP Trunk Profile Import/Export
Copyright © ALE International 2016
TC1994 ed.03
page 8/20
5 SIP Profile Import with OXO Connect 2.X OMC
SEC Import function is foremost intended to the configuration of ALE-approved SIP Trunk solutions. In such
context, the import must be carried out in accordance with the ALE guide dedicated to the solution. That guide
also describes the manual OMC tuning which is necessary to complete the configuration of the solution.
5.1 Data management
The SEC Import can be done in OMC on-line or off-line mode. During the operation, the existing system
configuration is altered in the following way:
Note
Since OMC of OXO Connect 2.0, it is possible to select the data management mode (also when
connected on RCE10.X system releases).
5.1.1 Addition mode
This mode allows to import configuration data from the SIP Trunk profile without affecting the existing SIP
trunk configuration which will continue to work as before the import operation. The purpose is to create a new
SIP Gateway entry and related SIP public numbering entry.

The “ARS/Automatic Routing: Prefixes” remain unchanged.

The “ARS/SIP Public Numbering” tables are kept and updated.
A new entry (with the first free index) is created from the SIP Profile data.

The “ARS/Gateway Parameters” tables are kept and updated.
A new entry (with the first free index) is created from the SIP Profile data.
This entry will be linked to the Public Numbering table previously created

The “ARS/SIP Accounts” remain unchanged.
All table entries having a reference to an existing SIP gateway will keep it.

The “VoIP parameters” and “Noteworthy addresses” .
The behavior depends on the “Overwriting of Voip Global Parameters” checkbox value (see in
ch.5.1.4).
5.1.2 Replacement mode
This mode allows to import configuration data from the SIP Trunk profile by modifying SIP gateway specified
by the installer. The purpose is to update the configuration parameters of a particular SIP Gateway entry and
related SIP public numbering data.

The “ARS/Automatic Routing: Prefixes” remain unchanged.

The “ARS/SIP Public Numbering” tables are updated.
If no “SIP Public Numbering” entry was associated to the current SIP gateway, an entry will be
created in this table .
All other fields will be updated with the values of the data stored in the profile.


The “ARS/Gateway Parameters” tables are kept and the selected entry is updated.
The index of the gateway (Index field) is unchanged.
Alcatel-Lucent OmniPCX Office - Release 10.0 and above
SIP Easy Connect: SIP Trunk Profile Import/Export
Copyright © ALE International 2016
TC1994 ed.03
page 9/20
If no “SIP Public Numbering” entry was associated to the current SIP gateway, an entry will be
created in this table. The index value of this new entry will be stored in the “ SIP Numbers Format
Index” field. All other fields will be updated with the values of the data stored in the profile.
This entry will be linked to the Public Numbering table previously created


The “ARS/SIP Accounts” remain unchanged.
All table entries having a reference to the selected SIP gateway will keep it.

The “VoIP parameters” and “Noteworthy addresses” . The behavior depends on the
“Overwriting of Voip Global Parameters” checkbox value (see in ch.5.1.4).
5.1.3 Start Over mode
The service level is the same as those known and defined from OXO R10.x (see ch.4.1).

The “ARS/Automatic Routing: Prefixes” entry lines are all deleted.

The “ARS/Gateway Parameters” tables are all deleted. A new entry table (with index 1) is
created from the SIP Profile data.

The “ARS/SIP Public Numbering” tables are all deleted. A new entry (with index 1) is created
from the SIP Profile data.

The “ARS/SIP Accounts” entry lines are maintained. However, for all entries, the value in the
column “Gateway parameters Index‟ is cleared (empty value).

The “VoIP parameters” and “Noteworthy addresses” . The behavior depends on the
“Overwriting of Voip Global Parameters” checkbox value (see in ch.5.1.4).
5.1.4 Field “Overwriting of VoIP parameters”
When activated, the VoIP global parameters present in the SIP profile will overwrite the present values of the
OMC database.
The parameters involved are
- The sub-set of the VoIP global parameters as initially defined in Appendix (ch 7) .
The “Voice Over IP / VoIP:Parameters”.
- The specific noteworthy addresses as initially defined in Appendix (ch 7)
The “System Miscellaneous / Memory Read/Write”.
Clicking on OK button leads to launch the import process; the OMC database will be updated with the
configuration parameters present in the SIP profile and in accordance with the import options specified by the
installer.
The completion of this operation remains the same as from R10.0 as the installer will be notified thanks to a
pop-up window displaying a message according to the final status.
Alcatel-Lucent OmniPCX Office - Release 10.0 and above
SIP Easy Connect: SIP Trunk Profile Import/Export
Copyright © ALE International 2016
TC1994 ed.03
page 10/20
Warning
Once the import is achieved successfully, a manual system reset must be completed: the user
is notified for that but can postpone the operation if necessary.
Warning
When the SIP profile has been imported, there is no mean to automatically rollback the system
database to the previous configuration.
5.2 User Procedure
With OMC R10.3 connected to an OmniPCX Office system = R10.x:
 Select “Import/Export ” and then “Import/Export Data ”
 Select “spf SIP Tunk Profile ” in the “Data Type ” pick list
 Push the “File” button then, select on your PC location the reference “.spf ” file of the required public
SIP Provider and then, click “OK ” button.
Alcatel-Lucent OmniPCX Office - Release 10.0 and above
SIP Easy Connect: SIP Trunk Profile Import/Export
Copyright © ALE International 2016
TC1994 ed.03
page 11/20
 Finally, push the “Import ” button, and select the mode and options
Alcatel-Lucent OmniPCX Office - Release 10.0 and above
SIP Easy Connect: SIP Trunk Profile Import/Export
Copyright © ALE International 2016
TC1994 ed.03
page 12/20
and click “OK ” to start the import process
After a while, when the operation is completed, a pop-up window is prompted:
Alcatel-Lucent OmniPCX Office - Release 10.0 and above
SIP Easy Connect: SIP Trunk Profile Import/Export
Copyright © ALE International 2016
TC1994 ed.03
page 13/20
6 SIP Profile Export
SEC Export function is also helpful for users who want to create and manage their "private" profiles for the
deployment of private SIP Trunk solutions.
Warning
Importing a private profile file NOT provided by ALE remains under the sole control and
responsibility of the user. ALE will deliver no support in relation with such private profiles.
6.1 Procedure
With OMC connected on an OmniPCX Office system >= R10.0, or in off-line mode with a cdb file loaded:
 Select “Import/Export ” and then “Import/Export Data ”
 Select “spf SIP Tunk Profile ” in the “Data Type ” pick list
 Push the “File” button then, select on your PC the name and location of the personal “.spf ” file you
want to create and then, click “OK ” button.
Alcatel-Lucent OmniPCX Office - Release 10.0 and above
SIP Easy Connect: SIP Trunk Profile Import/Export
Copyright © ALE International 2016
TC1994 ed.03
page 14/20
 Push the “Export ” button and then,
 Select from the pick-list the appropriate "SIP Gateway index" of your OMC configuration
Note
All ARS Gateway data relevant for the SIP profile (including the SIP Public Numbering entry) will be
exported globally from the SIP Gateway index selected.
 In the field "Profile name", type a personal label: info stored in the profile file and reused during the
import process for an easier identification of the profile loaded (see Ch. 3.1)
Note
Optionally, you can select “Add ‘SIP Trunk’ export ” if you want to export at the same time the .sip text
file containing the global configuration parameters of the SIP Gateway selected (refer to doc TC1945 "OMC
Export Of SIP Trunk Data")..
Alcatel-Lucent OmniPCX Office - Release 10.0 and above
SIP Easy Connect: SIP Trunk Profile Import/Export
Copyright © ALE International 2016
TC1994 ed.03
page 15/20
 Finally, push the “OK ” button to start the export process
Note
After a short while, when the export operation is achieved, the user gets a message box with a specific
status message. In case of failure, additional information may be given to point out the cause of the
problem.
Alcatel-Lucent OmniPCX Office - Release 10.0 and above
SIP Easy Connect: SIP Trunk Profile Import/Export
Copyright © ALE International 2016
TC1994 ed.03
page 16/20
7 Appendix: SIP profile config parameters
The following tables list for the different OXO releases, the OMC configuration data stored within a SIP profile
(data is grouped by OMC menus).
SEC
Connec
t
2.0
SEC
R10.1
VoIPgen_Trunk_Channels
VoIPgen_IP_QoS
VoIPgen_Protocol
VoIPgen_RTP_Direct
VoIPgen_Trunk_Codec_Passth
VoIPgen_Phone_Codec_Passth
ru
VoIPgen_G711_MOH
ru
VoIPgen_RTCP_Attribute
















/VoIP/VoIP Parms/General


 Value in the profile may need site tuning


 Value in the profile may need site tuning


















VoIPgw_SIPSourcePort


/VoIP/VoIP Parms/Gateway



VoIPdsp_DSP_Echo_Cancel
VoIPdsp_DSP_VAD




/VoIP/VoIP Parms/DSP






VoIPfax_T38_UDP_Redundanc
VoIPfax_T38_Fax_Framing
y
VoIPfax_T38_ECM






VoIPsiptrk_QoS
VoIPsiptrk_SIP_Timer_T1
VoIPsiptrk_SIP_Timer_T2
VoIPsiptrk_SIP_N_Retries
VoIPsiptrk_UdpToTcp
VoIPsiptrk_DNS_Auth












VoIPcodec_Def_CodecFraming
VoIPcodec_Def_CodecList
VoIPcodec_DTMF_Payload
VoIPcodec_G722.2_Payload








/VoIP/VoIP Parms/Codecs












VoIPtopo_SIPport
VoIPtopo_RTP_Range
VoIPtopo_T38_Range






VoIP/VoIP Parms/Topology


 Value in the profile may need site tuning


 Value in the profile may need site tuning


 Value in the profile may need site tuning
OMC PARAMETER
SEC
R10.2
SEC
R10.2
SEC
R10.0
REMARK
/VoIP/VoIP Parms/Fax









/VoIP/VoIP Parms/SIP Trunk


 Value in the profile may need site tuning















Alcatel-Lucent OmniPCX Office - Release 10.0 and above
SIP Easy Connect: SIP Trunk Profile Import/Export
Copyright © ALE International 2016
TC1994 ed.03
page 17/20
OMC PARAMETER
SEC
R10.0
SEC
R10.1
SEC
R10.2
SEC
R10.2
SEC
Connect
2.0
REMARK
GWdom_IP_Type
GWdom_IP_Address
GWdom_Def_Transport
GWdom_Target_Domain
GWdom_Local_Domain_Name
GWdom_Realm
GWdom_Remote_SIP_Port
GWdom_Outb_Proxy
/Numbering/ARS/GW Parms/DNS















/Numbering/ARS/GW Parms/Domain








































GWmedia_Fax_Mode
GWmedia_T38_Add_Signal
GWmedia_T38_CED_Tone
GWmedia_Codec_Framing
GWmedia_Bwidth
GWmedia_DTMF_Mode






GWreg_Reg_Requested
GWreg_Check_Before_Req
GWreg_Reg_Name
GWreg_Reg_IP_Address
GWreg_Reg_Port
GWreg_Reg_Expire_Time
GWreg_Reg_AoR_In_Contact
GWreg_Reg_AoR_In_From
GWreg_Reg_AoR_In_PAI
GWreg_Reg_AoR_In_PPI
GWreg_Reg_AoR_In_Rsv1/Rsv4
GWreg_Reg_RFC3327
/Numbering/ARS/GW Parms/Registration




























































GWident_RFC3325
GWident_HistInfo_Enabled
GWident_Inc_CLI_Headers
GWident_Out_CLI_PPI_Used
GWident_Out_CLI_PAI_Used
GWident_Out_COLP_Headers
GWident_HistInfo_DivHeader
GWident_Alternative_CLIP
GWident_P_Access_Network_Info
/Numbering/ARS/GW Parms/Identity













































GWprot_SessTimer_Time
GWprot_PEM_Enabled
GWprot_UPDATE_Enabled
GWprot_SNAT_Enabled
GWprot_PRACK_Enabled
GWprot_GWalive_Prot
GWprot_GWalive_Timer
GWprot_RFC4904_Enabled
GWprot_RFC4904_Trk_GID
GWprot_RFC4904_Trk_Context
/Numbering/ARS/GW Parms/Protocol


















































GWdns_DNS_Mode
GWdns_Prim_DNS
GWdns_Sec_DNS
/Numbering/ARS/GW Parms/Media
























Value in the profile may need site tuning











Alcatel-Lucent OmniPCX Office - Release 10.0 and above
SIP Easy Connect: SIP Trunk Profile Import/Export
Copyright © ALE International 2016
TC1994 ed.03
page 18/20
OMC PARAMETER
SIPnum_Out_Calling_Format
SIPnum_Out_Calling_Prefix
SIPnum_Out_Called_Format
SIPnum_Out_Called_Prefix
SIPnum_Out_Called_Short_Prefix
SIPnum_Inc_Calling_Format
SIPnum_Inc_Calling_Prefix
SIPnum_Inc_Called_Format
SIPnum_Inc_Called_Prefix
SIPnum_Alt_CLIP_example
Flag_VOIPnwaddr
Flag_VipPuNuA
Flag_ExtNuFoVoi
Flag_MultAnsRei
Flag_SimulIpAlt
Flag_PrefCodec
Flag_PrefFramin
Flag_FaxPasCd
Flag_SIPInDspNm
Flag_SIPOgDspNm
Flag_INVwSDPtrk
Flag_SIPdtmfInB
Flag_SuprAlerTo
Flag_MyICcaller
Flag_USalterfro
Note
SEC
R10.0
SEC
R10.1
SEC
R10.2
SEC
R10.2
SEC
Connect
2.0
/Numbering/ARS/Public Numbering





































/Misc/Memory Read Write




























































REMARK
























Parameter discarded from SEC since
R10.1
The full table is managed (see note
below)
The "VOIPnwaddr" noteworthy address corresponds to a complex table of VoIP flags: every individual flag
is stored at a defined position in the table and may occupy one or several consecutive bytes. SIP Easy
Connect does Import/Export the whole table.
Alcatel-Lucent OmniPCX Office - Release 10.0 and above
SIP Easy Connect: SIP Trunk Profile Import/Export
Copyright © ALE International 2016
TC1994 ed.03
page 19/20
Follow us on Facebook and Twitter
Connect with us on Facebook and Twitter for the latest:
 Software releases
 Technical communications
 AAPP InterWorking reports
 Newsletters
…and much more!
twitter.com/ALUE_Care
facebook.com/ALECustomerCare
Submitting a Service Request
Please connect to our eService Request application.
Before submitting a Service Request, please be sure:
 The application has been certified via the AAPP if a third party application is involved.
 You have read the release notes that list new features, system requirements, restrictions, and more,
and are available in the Technical Documentation Library.
 You have read through the related troubleshooting guides and technical bulletins available in the
Technical Documentation Library.
 You have read through the self-service information on commonly asked support questions and known
issues and workarounds available in the Technical Knowledge Center.
- END OF DOCUMENT -
Alcatel-Lucent OmniPCX Office - Release 10.0 and above
SIP Easy Connect: SIP Trunk Profile Import/Export
Copyright © ALE International 2016
TC1994 ed.03
page 20/20
Download PDF
Similar pages