KVM-1 040 I KVM-1 080 I KVM-1160
USER'S MANUAL
TABLE OF CONTENTS
INTRODUCTION
1
FEATURES
1
PACKAGECONTENTS
1
TECHNICAL SPECIFICATIONS
2
SYSTEM REQUIREMENT
3
CABLE DIAGRAMS
4
PRODUCT DETAILS
4
HARDWARE INSTALLATION
5
USAGE
5
ON SCREEN DISPLAY OPERATION
8
TROUBLESHOOTING
10
CERTIFICATES
11
Im ~
[1Tilf!i:rn
Thank you for purchasing TOP-VIEW KVM switch. TOP-VIEW KVM switch can save your MONEY, TIME,
SPACE, EQUIPMENT and POWER.
Controlling multiple PCs from One Keyboard, Mouse and VGA Monitor. TOP-VIEW
KVM switch is loaded with features such as 19" Rack Mount Size, Daisy Chain up to eight units, On Screen
Display Manual, Password security, searching PC server name, Hot key Control, Front Panel Push Button
and Auto Scan Control. It has complete keyboard and mouse emulation for simultaneous PCs boot-up
process.
.
.
4/8/16 port KVM switch is 19" rack mount size design.
Support
Microsoft
compatible
.
..
Intellimouse,
Microsoft
Intellimouse
Explorer,
Logitech
Net Mouse or the other fully
MS mouse.
Provide Console PS/2 to PC serial mouse conversion
Support DOS, Win3.X, Win95/98/98SE/2000/ME,
Hot Plug - Add PCs or Remove
Connected
Win NT, Netware, Unix, Linux
PCs for Maintenance
without
Powering
Down the KVM
switch or PCs.
.
.
.
.
.
.
.
Very High Video Quality - Up To 1920X1440,
Bandwidth:
200MHz
No Software Required - easy PC selection via On Screen Display Manual, Push Buttons, Hot Keys
Support eight characters
password
Auto Scan Mode for monitoring
Keyboard
protection
~nd search PC server name
PCs and flexible Scan time from 5-99 seconds
status restored when switching
PCs
LED Display for easy status monitoring
Buzzer sound for switching port confirmation.
Using Standard Keyboard, VGA, Mouse cable.
.
.
Built-in one extra daisy chain port and no waste any PC port
No DIP switch setting needed and auto detect daisy chain bank
Model No.: KVM-1040
Top-View 4 port KVM Switch
1 PCS
User's manual
1 PCS
AC to DC Power Adapter
1 PCS
Rack Mount Kit
1 SET
Daisy Chain Cable
1 SET
Model
No.: KVM-1080
Top-View 8 pon KVM Switch
1 PCS
User's manual
1 PCS
AC to DC Power Adapter
1 PCS
Rack Mount Kit
1 SET
Daisy Chain Cable
1 SET
Model No.: KVM-1160
Top-View 16 port KVM Switch
1 PCS
User's manual
1 PCS
AC to DC Power Adapter
1 PCS
Rack Mount Kit
1 SET
Daisy Chain Cable
1 SET
Model No.
-KVM-1080
KVM-1040
14
I~C~~_~
~!~-
Is
: :~~:J ~;;~;:D~":~~
-
Console Port Connector
(All FemaleType)
--,--,
Ps/2 Keyboard mini Din 6 pin
~
Daisy Chain Port Connector
(All Female Type)
[PC selection
~
LED
~ent
~~~~
~~~~~IS
~~~~=
IMnll=
I=mlllAtinn
PS/2MouseMiniDin6 pin
Co",,":""
~~~~~~B15~!~
-..~
Ps/2 Keyboard mini Din 6 pin
c-
.f.;;""..:t;
[;'; ~4
;9"?
Ps/2 Mouse Mini Din 6 pin
---
VGA HDDB 15pin
~~;i;!;~;:;!:;;~:;~
] ~~~~c~~_r::::.!~DS
J~-
~I~:~
~._.:;:~;~~-IP~?
KVM.1160
16
.
IConsole PS/2 to each PC port serial mouse
Mouse Conversion
(Only Console port to PC
port)
l~~;;~:=
l~~~___==
Daisy Chain MAX Level
[~~~;:;;;~
l~o!!.~~.:
lp~!r_~~~==
l~~_~~~~
l~~~~~
l~u_~~~~
Size
II
I
18 levels
l~;~tl~==:
I
DC 12
I~t
I1-200-000/0. Non-Condensing
IG~~~;~~
E~~~2~:
I~=====~ ~~==
===
1141(L)
'Dimension (cm)
1128
1116
I
Metal
I
"""""
'
I
X 16.5(W) X 4.7(H)
"~~~~~~~
.
:~~--
1141(Lj X 16.5(W} X 4.7(H)
141(l} X 22.5(W) X 8.4(H)
~~:{:I'llllt~I"I~ll~
Specifications:
-~i;!~---KVM~1160--
rc~~~-;;;;---l One VGA Monitor
Computer side
One VG~~~nit~r:::;
I
:;;;;;~r~~ :::;;__~;;~a~~__-
[ :;;_:;~~;;~~-~--_J
C;~
' 4 HDB 15 pin male to male,
8 HDB 15 pin male to male
1
, VGA cables
!
I,
VGA cables
! 4 PS/2 cable male to male fori 8 PS/2 cable male to male for
I
Keyboard
One VGA Monitor
I,
Keyboard
16 HDB 15 pin male to male
j VGA cables
16 PS/2 cables male to male
for Keyboard
14 PS/2 cables male to male 18 PS/2 cables male to male for 116 PS/2 cables male to male
Ifor Mouse
i Mouse
Ifor Mouse
(I!:l ~ r;:JI] f:.I'WUW
PS/2 Cable:
Mini Din 6 Din Male to Male
VGA Cable:
HDB15 pin Male to Male
tSi~~
~
.av~$
""r~
AT to PS/2 keyboard
adapter:
Din 5 pin Female to Mini Din 6 pin Male
0
.
1~[11iiI.mm1~
Front Panel & Rear Panel of KVM-1040:
Front Panel & Rear Panel of KVM-1080:
Before installation, please make sure all of peripherals and computers have been turned off.
1.
Connect the Keyboard,
2.
Connect the Keyboard, VGA monitor, and Mouse to the console pon of KVM switch
VGA, Mouse cables to the computer
pons of KVM switch
3.
After Powering on computers
and finishing the boot-up process, you can stan to go KVM switch.
Note:
Please don't switch the PC port (i.e. Don't press the push button of KVM switch or run hot key) during the
computers are under boot-up process.
~mI
The
power
on state
of 4/8/16
When you power on KVM switch,
zero -" 00000000
Note:
port
KVM
switch:
it will ask you the password,
the
default
password
value
is eight
". Please key in eight zero and enter the same value at retype field.
Before you are not familiar with the operation of OSD manual, please don't change the password - i.e.
keep default eight zero (00000000)
the password,
value. Otherwise,
you need send it back to your distributor
if you have set the password
for maintaining
the password.
and unfortunately
forget
LED Indication:
You can press the button in order like mentioned-above
diagram.
When you select one of four PC ports and this PC is shut down or this PC port is disconnected
to the PC. the
selected port LED will flash. When you select one of four PCs ports and this PC is powered on, the selected
port LED is lit.
KVM-1080 (8 Port)
1-+2
-+
3 -+4
-+
5 -+6-+
7 -+
8~
LED Indication:
You can press the button in order like mentioned-above
diagram.
When you select one of eight PC ports and this PC is shut down or this PC port is disconnected
to the PC, the
selected port LED will flash. When you select one of eight PCs ports and this PC is powered on, the selected
port LED is lit.
LED Indication:
You can press the button in order like mentioned-above diagram.
When you select one of sixteen PCs ports and this PC is powered on, the selected port LED is lit. When you
select one of sixteen PC ports and this PC is shut down or disconnected a PC, the selected port LED will
flash.
Keyboard
Hot
Key
You can also conveniently
To send commands
seconds.
Commands:
command
to Top-View
Top-View KVM switch by switching
KVM switch, the "SCROLL
You will hear a beep for confirmation
any key in hot key mode within 2 seconds
LOCK"
and the keyboard
System control state.
Below are the different hot key commands:
within2 seconds~
+[I]
be pressed
twice
within
2
is in hot key mode. If you have not pressed
(It means to key in any key follows up "Scroll Lock" "Scroll Lock"
key). the keyboard will back to under Operation
~
pons through simple key sequences.
key must
Previous Channel
"
+rn
=
Next Channel
(Note: You also could press "up arrow key" or "down arrow
key" longer time to speed up selecting the destination
port)
=
Previous Bank
=
Next Bank
+~
=
Beeper
+~
=
(Note: The default Beeper function is ON)
Auto Scan
To get out of Auto Scan Mode, Press any key or SPACE bar.
+~
+~
=
aso defaultvalue
(Note: Not including password)
=
Search the same PC name
(Note: Search PC name starting from 1st PC port)
+ Space bar =
On Screen Display Manual
When you pop up the OSD manual window go through the hot key, you will see the following small window on
your monitor.
a. The 1STIinebar is Bank no.
b. The 2ndblock is your PC system
name list. You will find the system
number list from 01 to 04 ( if the
current box is 4 port) or from 01 to 8
(if the current box no. is 8 port)or
from 01 to 16 (if the current box no.
is 16 port). You can define your PC
name in maximum 8 characters. The
factory default of 16 port KVM switch
PC name is from "SYSTEM 01",
"SYSTEM 02" ,..., "SYSTEM 16"
and 8 port KVM switch is from
"SYSTEM 01", "SYSTEM 02",...,
.SYSTEM 08". Besides, the sun
symbol " ~ " near to the PC name
represents
the
PC
system
is
powered on.
To use up arrow key"
+ " or down arrow key"
., " to select port for destination PC name. After you have
selected the PC port already, you can press the ENTER Key to switch the PC port you want immediately
To use" PgUp " key or" PgDn" key for selecting previous or next Bank no. (or Box No.)
To press"
name.
8
INS" key for editing PC
After finishing the edit, please press.
Enter.
key for saving information.
To use" Tab" key to select items like Bank, OSD, SCAN, CHANGE
PASSWORD,
CONSOLE
ON/OFF,
etc...
a. The' OSO: 10 SEC' means that
the OSO windows display or PC
system name exists 10 sec. on
your monitor. You can modify it
from 05 sec to 99 sec. The
factory default value is 10 sec..
b.
The" SCAN TIME" means that scan interval from one PC port to next PC port. The default SCAN time
is 10 sec and the maximum
scan time is 99 sec.
The" CHANGE PASSWORD" is for user to avoid all PC systems to be intruded by the other person.
The default password is 8 diaits " 00000000 ".
There is an enter password window showed out when you select this item and then press the Enter.
The maximum password is eight digits. After you key in the password already and press the Enter key,
there is another window for confirming your typed password.
You need to retype the password again for rechecking
d.
The" CONSOLE
ON/OFF"
your previous key-in password is matched or not.
means to manage the console of KVM switch. If you select"
", it means that any user can use the console.
If you select"
CONSOLE
state), it means that any user will not be allowed to use the console
When you enter the password
set to ON.
CONSOLE
ON
OFF "(factory default OFF
unless you enter the password.
already and pass the KVM switch authentication,
the CONSOLE
After you finish using KVM switch, please don't forget to set up CONSOLE
will be
ON state to OFF
state. Besides, if current CONSOLE
is ON state and you reset KVM switch,
the CONSOLE
will be set
up ON state back to OFF state.
When you finish the set up of PC name and get out of OSD setting mode, you will find the PC name
showed at the up-left corner of monitor. Now, you can use ESC key to clear the message right away if
you don't need it.
If you want OSO returning back to factory default value, you can execute "SCROLL
LOCK", "SCROLL
LOCK" , "R" keys in order. The Seven segment LEOs on the front panel will be flashed during
the refresh process.
When the OSO value back to default setting, the seven segment LEOs on the front panel will stop
flashing
Ensure that all cables are well seated. Label all of cables with the number for each respective
computer to
avoid confusion.
1.
The Power Jack polarity is center positive and the power adapter need be DC12V, 1A or DC9V, 1A.
2.
Don't press any keys on the keyboard while the selected computer
cause the keyboard error or keyboard
is booting up. Otherwise,
it might
is not detected at PC side.
3. The computer boot up fine, but keyboard doesn't work
.
Make sure the keyboard works when directly plugged into the computer.
.
Try a different keyboard, but use only 101,102 or 104-key keyboard.
4. The Mouse is not detected during PC boot up.
.
Make sure the mouse works when directly plugged into the computer.
.
Make sure the mouse is a true PS/2 mouse. A combo mouse will work just as long as it is set for PS/2
.
Avoiding moving the mouse or pressing the mouse buttons when switching ports.
.
Avoiding switching ports during shutting down the PC process.
.
When you switch one PC port to another PC port, the best scan time setting need to be set to 5
mode with the correct adapter. Try a different mouse.
sec. or more. Normally, the VGA monitor change one resolution mode to another will take one
or two seconds. So, the scan time is not recommended to below 5 seconds.
10
FCC
This equipment
has been tested and found to comply with Part 15 of the FCC Rules.
Operation
is subject to
the following two conditions:
(1) This device may not cause harmful interference,
(2) This device
must accept
any interference
and
received.
Including
interference
that may cause
undesired
operation.
CE - Certificate
This equipment is in compliance with the requirements of the following regulations: EN 55 022: CLASS B
Download PDF
Similar pages