Military
Aimpoint AB
Jägershillgatan 15
SE- 213 75 Malmö, Sweden
Phone +46 (0)40 671 50 20
Fax +46 (0)40 21 92 38
E-mail: info@aimpoint.se • www.aimpoint.com
Graphic Design: STICKY FINGERS Malmö, Sweden • Photographers: Stefan Albers, Robbie Barkmann, Bigdomphoto, L.F. Dunal, Robert Glover, Henry Kokko,
Alex Landeen, Magnus Nyman, Peter Ozberg, J.C. Tolphin
Printing House: Exaktaprinting, Malmö, SWEDEN
This printed material is for information purposes only and does not constitute any binding obligation or agreement by Aimpoint AB
All rights reserved. © 2013 Aimpoint AB. Art. No. M01490
Law Enforcement
Red dot sights
2013
TABLE
OF
CONTENTS
2013
4 The President´s Letter 6 Why an Aimpoint Red Dot Sight?
7 Development & Quality
12 Micro T-1 16 CompM4/M4s 18 PRO
20 CompM3
22 CompML3
26 3XMag
28 CEU
30 MPS3
32 LPI
36 Mounting Solutions
38 Accessories
39 Warranty & Customer Service
40 System-of-Systems
42 Technical Specifications
The President´s Letter
To Our Valued
Customers and Friends:
In 1974, a small group of Swedish entrepreneurs started
exploring ways to improve shooting accuracy. Their goal was
simple but ambitious; to create a sighting technology that
would allow shooters to acquire difficult targets quickly and
accurately under any conditions imaginable. Little did they
know that the product their idea would eventually evolve
into, the Aimpoint electronic reflex sight, would soon revolutionize the shooting and hunting industry.
In basic terms, Aimpoint’s breakthrough technology allows
a shooter to do what comes naturally – shoot while keeping
both eyes open and remaining focused on their target. When
a shooter looks into an Aimpoint sight, a red dot appears in
the lens. When the red dot is on the target, you’re on target,
with no centering required. It is this inherent combination of
simplicity, speed, and accuracy that makes Aimpoint sights
the preferred choice for beginners and experts alike.
The U.S. Army was the first military force to recognize the
full potential of Aimpoint’s parallax-free, red dot technology. In 1997, the Army awarded Aimpoint its first contract
for the supply of electronic sights. Since then, Aimpoint has
delivered over 1,000,000 of its soldier-tested, combat proven
sights to the U.S. Military. Even following several additional
rounds of rigorous competitive testing, Aimpoint remains
the only manufacturer type-classified to supply the M68CCO
to the US Military to this day.
As a result of Aimpoint’s commitment to innovation, quality,
and constant improvement, the company is recognized as
the worldwide leader in electronic sighting technology. The
products you will find contained on the pages of this catalog
are the result of over 38 years of undiluted focus on our company’s core competency, and represent the finest products
we have ever offered.
The Aimpoint Micro sights are the toughest and most dependable compact sights available. The CompM4s is the latest
version of the US Army’s M68CCO, and offer up to 8 years
of constant-on use from a single AA battery. And the new
Aimpoint Patrol Rifle Optic has already achieved an enormous
response from US Law Enforcement.
Around the world there are well over 2,000,000 hunters,
sports shooting enthusiasts, police and military personnel
who use Aimpoint sights, and we thank you for your trust
and continued support. For those who have yet to use our
products, be sure to give us a try and see just how fast and
accurately you can shoot without magnification.
We will be busy working on the next big advancement in optics
technology, and we promise that we will not let you down.
Just wait until you see what we do next!
Sincerely
Lennart Ljungfelt
President
4
5
Development & Quality
Why an Aimpoint® Red Dot Sight?
The Aimpoint Philosophy
Why an Aimpoint Red Dot Sight?
When the time comes to shoot, there should be absolutely
no question that you can count on your sight to perform.
We believe that a weapon sight should simplify aiming while
meeting the highest possible requirements for reliability
and ruggedness. We know that conditions in the field place
extreme demands on your equipment, so we design and
test Aimpoint products to stand up to any conditions you
are likely to encounter. We also design our products to
operate constantly for years on a single battery so your
sight will always be ready whenever you need it.
Place the dot on your target - from any angle
Why a Red Dot Sight?
To be successful, shooters must be able to aim accurately
and quickly under a wide variety of conditions. On a shooting range, there is plenty of time to take aim, but in the
real world, everything is in fast motion. Add rough terrain,
foul weather, poor light and high levels of stress and even
the most experienced marksman will be put to the test.
Red dot sights are superior to iron sights and magnifying
scopes in several ways. Using these other types of aiming
devices require that the shooter’s focus leaves the target.
With iron sights, shooters must align the rear and front
sights with the target. With scopes, the field of vision is
severely limited, and locating your target through a tube
with one eye closed wastes valuable time and destroys
your situational awareness.
The single red dot has been proven to be the fastest
type of reticule to place on target, and provides the greatest increase in hit probability on moving targets. Red dot
sights allow you to remain focused on the target. Shooting with both eyes open means that you remain in touch
with what is going on around you, and can deal with new
situations as they arise.
6
Aimpoint sights are parallax-free, which means that you
never have to worry about centering the dot inside the
sight. When the dot is on target, so are you.
All conditions - Anywhere
Aimpoint sights work in all light conditions from darkness
to bright desert sunlight. They are fully submersible so you
never have to worry about rain or immersion. Aimpoint
sights are developed and tested to be used in any weather
conditions, from the sub-zero temperatures of the Arctic
to the heat and humidity of the tropics.
On any type of firearm
Whether you have a rifle, shotgun, handgun or crew-served
weapon, Aimpoint has a sight for you.
User friendliness
Aimpoint sights are extremely user friendly. Operated by
a mechanical switch, an Aimpoint sight can be easily and
quickly changed to the right setting while simultaneously
aiming through your sight. Our mechanical switch won´t
freeze and is easy to use whether you are wearing gloves
or not.
Environmental awareness
At Aimpoint, we take great pride in making sure that neither
hazardous nor radioactive materials are used in our sights.
Standard features on all Aimpoint sights
• Unlimited field of view
• Parallax-free and unlimited eye relief
• Unaffected by extreme weather conditions
• Extremely rugged, durable construction
• No hazardous materials
• No laser emission that could be harmful to your eyes
• Increased aiming confidence and hit probability
• Reduced training time and ammunition consumption
• Battery life measured in years
Quality
Aimpoint AB is certified according to
ISO 9001:2008, and the manufacturing is executed in a highly controlled
process and environment. Each sight is
hand-built at our state of the art facilities in Sweden, assigned an individual
identification number, and subjected
to rigorous testing and numerous quality control checks during the manufacturing process.
Aimpoint’s Advanced Circuit Efficiency Technology
Aimpoint’s new Advanced Circuit Efficiency Technology
(ACET). ACET combines Aimpoint’s superior accuracy and
ease of use with significantly lower power usage to maximize battery life. ACET sights can last up to nearly 50,000
hours (over 5 years on setting 7 out of 10) of constant use
from a single battery.
That is 49,000 hours more than other competitive sights
on the same setting. The Aimpoint CompM4 sights can
operate for up to 80,000 hours (over 8 years) of constant
use from a single AA battery! Aimpoint has taken another
giant step forward by applying its scientific expertise in
developing the Micro series of sights. The Micro sights
are small enough, yet rugged enough to be used in any
application imaginable.
Tests performed by the military have repeatedly proven
that the single red dot is the reticule with which marksmen most quickly fire a well aimed shot under timed and
rapid fire close combat exercises. Most Aimpoint sights are
available in two different dotsizes: either 2 or 4 minutes of
angle (MOA). In terms of speed and accuracy, extensive
trials have shown that the 4 MOA is the optimal dot size
for most users in close shooting situations. The 2 MOA dot
is ideal for those who frequently need to engage targets
beyond 200 meters, and is the best choice for use with
the Aimpoint 3X magnifier.
Aimpoint - Global leader
Aimpoint is the recognized worldwide leader and originator
of red dot sighting technology. After more than 38 years of
working closely with experienced marksmen and military
weapon experts around the world, Aimpoint red dot sights
remain the No. 1 choice for combining ruggedness, speed
and accuracy. Aimpoint sights are in service with the Dutch,
Finnish, US, French, Swedish, Italian, Norwegian Armies,
but also with the US Air Force, the US Marine Corps, and
numerous other military forces, police agencies, and special
teams worldwide.
7
Aimpoint®
Tactical Applications
Aimpoint® Tactical Product Line
Elite police and military forces around the
world have used Aimpoint® red dot sights for
more than 20 years to increase speed and
accuracy.
Aimpoint® red dot sights are rugged, water
proof and withstand any weather conditions.
And with battery life measured in years, reliability is never an issue.
Whether in the field or on the streets, you can
count on Aimpoint® red dot sights!
8
9
Aimpoint®
’
10
The only compact sights tough enough
to carry the Aimpoint brand.
11
’
No matter what your mission, the size and weight of your equipment is
a critical factor. With the Aimpoint Micro T-1, Aimpoint has introduced
an aiming system that provides the performance of our full-sized sights
in the smallest package possible.
Simply safe - in training and in the field
I appreciate the easy handling of Aimpoint aiming devices. They facilitate my training with rapid target acquisition and allow me to aim very quickly. In stressful situations, I really appreciate the one-switch-only principle. It gives me confidence and I
can concentrate on what is essential. The battery operating time is impressively long
and the devices are robust and demand low maintenance. I would not change from
Aimpoint aiming devices against any other product on the market.
Operator, SWAT team, Switzerland
Features
• Ideal for rifles, carbines, shotguns, submachineguns and handguns.
• 1X (non-magnifying) parallax free optic.
• Compatible will all generations of Night
Vision Devices (NVD).
• 1 Off position, 4 night vision compatible settings and 8 daylight settings
of which one extra bright for use with
laser protection glasses or in bright
desert sunlight.
• Integral Picatinny-style mount allows
easy attachment to any rail.
• Patent pending mount is keyed to the
sight body to absorb recoil.
• ACET technology allows 50,000 hours
(over 5 years) of constant operation
from one battery.
• Available in 2 dot sizes (2 or 4 MOA)
• Submersible to 25 meters (80 feet).
• Use as a stand alone sight or “piggybacked” on larger magnifying, thermal,
or night vision optics.
For more technical information,
please take a look at page 42
Customize your sight
Aimpoint’s Micro sights are both rugged and versatile.
With numerous mounting options the Micro sights can be
deployed on nearly every weapon in your armory.
Micro T-1
Built to offer the same battle proven ruggedness as other Aimpoint products, the Micro T-1 is able to
perform under extreme conditions while adding negligible weight to your weapon. Suitable for use on
Rifles, Carbines, Shotguns, Sub Machineguns and Handguns, the Aimpoint Micro T-1 is ideal as a standalone sight, and because it weighs less than 105 grams including the integrated Picatinny mount, it can
easily be “piggy-backed” on top of larger magnifying scopes, night vision, or thermal imaging optics.
The Micro T-1 is designed to work with the Aimpoint 3X Magnifier and Concealed Engagement Unit
(CEU), as well as night vision using the Aimpoint TwistMount system. The performance of the Micro
T-1 is optimized for use with all generations of night vision devices (NVDs), but is especially suited for
3rd generation night vision technology.
12
The Micro is rapidly becoming the tactical sight of choice
by both law enforcement and military units. Aimpoint
offers two new spacers available for the Micro which increase the mounting options across the different weapon
platforms.
Micro T-1
39 mm Micro spacer high
30 mm Micro spacer low
For more information about mounting solutions see page 36-37
Micro LRP mount
13
Comp
Aimpoint®
’
14
More than 1 million Comp sights
are in use worldwide!
15
CompM4
CompM4s
The Aimpoint CompM4 series of sights are the toughest sights that
Aimpoint has ever produced. The Aimpoint CompM4 and CompM4s
sights have lately been chosen as the standard infantry soldier sight in
many NATO countries. These optics are extremely rugged and operate
continously for up to 8 years using a single AA battery. The competition
is not even close. The Aimpoint CompM4 is the latest version of the
U.S. Army´s M68CCO (Close-Combat Optic), continuing a legacy that
Aimpoint has maintained since 1997.
The CompM4 has a top-mounted battery compartment,
placing the adjustment knob in the classic position that
many shooters expect on an Aimpoint sight.
The CompM4s has a low battery compartment that offers
a more streamlined profile.
CompM4
CompM4s
Features
• Compatible with every generation of
Night Vision Devices (NVD).
• 1X (non-magnifying) parallax free optic.
•ACET technology combined with a AA battery gives 80,000 hours (over 8 years) of
typical usage on one battery.
• Internal voltage regulator allows the
CompM4 to be used with any AA size
battery.
• 7 night vision compatible settings and 9
daylight settings.
• Mount base is “keyed” into the body of
the sight to absorb recoil.
• 500,000 hours of use on NVD setting.
• 2 MOA dot for close combat and long
distance engagement.
• Matches perfectly with Aimpoint 3X
magnifier.
• Unequalled light transmission allows for
enhanced low light operation.
• Submersible to 45 meters (150 feet).
For more technical information,
please take a look at page 42
CompM4 and CompM4s
Aimpoint CompM4 and CompM4s sights both include enhanced ACET technology that provides up to 8 YEARS of
continuous use from a single AA battery! Once turned on,
Aimpoint sights stay on – there is no automatic shut-off
so your optic is ready whenever you need to use it. The
CompM4 and CompM4s incorporate an integrated mount
that eliminates the need for a separate ring, and can be
customized with vertical and forward spacers to fit a variety
of weapon systems. CompM4 and CompM4s sights are
compatible with all generations of night vision devices (NVD).
Complete and ready to mount
The standard configuration of the CompM4 series of
sights contains the sight (CompM4 or CompM4s), a QRP2
mount and a standard AR15 spacer. These sights also
come equipped with a killFlash® anti-reflection device
and MILSPEC rubber lens covers.
Customize your sight
CompM4 and CompM4s sights can be customized according to your preferences and needs. The sight is delivered
with a standard mount and a spacer. Both the mount and
spacer can be changed to meet the demands of your specific mission and equipment. The extended spacer moves
the sight forward, creating additional room on the main
rail for a magnifier and back up iron sight (BUIS).
CompM4 or CompM4s
Standard
spacer
Forward
spacer
For more information about mounting solutions see page 36-37
QRP2 Mount
LRP Mount
TNP Mount
Rubber Bikini Lens Cover
ARD killFlash® filter
16
Standard Spacer
QRP2 Mount
17
PRO
patrol rifle optic
Designed with input from a distinguished group of current
and former professionals, the Aimpoint Patrol Rifle Optic
(PRO) incorporates many never before seen features to
maximize this sight’s performance within the challenging
conditions faced by modern law enforcement.
Flip covers are included to further protect the lenses.
A transparent rear lens cover is utilized allowing the user
to engage a target with the lens covers closed in an emergency situation. A two Minute of Angle (2 MOA) red dot is
utilized to allow maximum accuracy at all distances.
Features
• Compatible with all generations of
night vision devices and may be used
with Aimpoint 3X Magnifier and CEU.
• 1x (non-magnifying) parallax free optic.
• 2 MOA dot for accurate target engagement at all distances.
• ACET Technology allows 30,000 hours
(over 3 years) of operation on one
single battery.
• 4 night vision compatible settings and
6 daylight settings.
• Pre-mounted with QRP2 mount for
M1913 standard Picatinny rail applications.
• Spacer for AR15/M4 carbine application.
• Threaded front lens opening allows use
of anti-reflection device (ARD).
• Submersible to 45m (150 feet).
For more technical information,
please see page 42
Patrol Rifle Optic
The front lens utilizes a unique band-pass coating, which allows the sight
to be used with all generations of night vision devices. The modular QRP2
mount includes a removable spacer that indexes the sight at the optimal
height for co-witness with the standard iron sights on different carbine style
weapons. This spacer can be removed to enable the use of the sight on
police shotguns or submachineguns. The QRP2 mount also incorporates a
torque-limiting twist knob that provides the optimal level of pressure on the
rail while eliminating the possibility of over-tightening. Both the front and
rear lenses are recessed within the sight body to provide protection against
impact damage, scratches and fingerprints.
18
’
The PRO sight combines battle proven lineage and
world-renowned Aimpoint durability with an affordable package price. It simply doesn’t get any better.
Ben Battles
Editor On Target
19
CompM3
The CompM3 is a very popular sight which is in use with many police and
armed forces personnel. Why? Premium performance features such as five
years of constant-on power from a single battery, night vision compatibility,
and legendary Aimpoint ruggedness. Add all this to the flexibility of being
able to utilize any standard 30 mm ring mount and you can see why the
choice is obvious.
CompM3 is shipped with a black rubber armor
cover to further protect the housing. A flat dark
earth cover is available as an accessory.
Features
• 1X (non-magnifying) parallax free optic.
• Compatible with all generations of
night vision devices and may be used
with Aimpoint 3X Magnifier and CEU.
• 4 night vision compatible settings and
6 daylight settings.
• ACET technology allows 50,000 hours
(over 5 years) of operation from one
battery.
• 500,000 hours of use on NVD setting.
• Available in 2 dot sizes (2 and 4 MOA).
• Submersible to 45 meters (150 feet).
• Comes with replaceable outer black
rubber cover.
• Outer rubber cover also available in
Dark Earth Brown.
• May be used with 30 mm mounts from
any manufacturer.
For more technical information,
please take a look at page 43
CompM3
When you grab your rifle or carbine, you don’t want to be playing with buttons or worrying whether your battery is dead or alive. With more than five years of constant-on
power, you never have to shut a CompM3 sight off. This means that you will be ready
faster, and can count on your sight to perform when you need it most. The CompM3
is compatible with all generations of night vision devices (NVD), and comes with a
replaceable outer black rubber armor cover, which protects the sight during transport
and operations, and adds an additional stealth factor. This outer cover is also available
as an accessory in a Dark Earth Brown color.
20
’
40 meters below, after a HAHO jump, or in the sandbox – no
matter where, or when, I can really rely on my Aimpoint sight.
Irrespective of the environment, the situation, or the duration
of the mission, I know that when I press the trigger there will
not be any surprises - the red dot will always be there for me.
E. A. DeFontcuberta
Special Forces Shooting Instructor
Various NATO countries
21
The CompML3 is just as tough as the CompM3, and features the
same Advanced Circuit Efficiency Technology (ACET) that gives the
sight unparalleled battery life and ease of use. Built primarily for use
in daylight and low light conditions for law enforcement and military
applications, the CompML3 will hold up under the roughest physical
handling and most severe weather conditions.
CompML3
CompM3 is shipped with a black rubber armor
cover to further protect the housing. A flat dark
earth cover is available as an accessory.
Features
• 1X (non-magnifying) parallax free optic.
• CompML3 is designed for daylight and
low-light conditions.
• ACET technology allows 50,000 hours
(over 5 years) of operation from one
battery.
• Available in 2 dot sizes (2 and 4 MOA).
• Submersible to 45 meters (150 feet).
• Comes with replaceable outer black
rubber cover.
• Outer rubber cover also available in
Dark Earth Brown.
• May be used with 30 mm mounts from
any manufacturer.
For more technical information,
please take a look at page 43
’
CompML3
The CompML3 is the right choice for anyone who wants a full featured sight, but
doesn’t require Night Vision compatibility. With all the other great features of the
CompM3, the CompML3 is a serious alternative for use in daylight and low light
applications. Just like the CompM3, the intensity of the red dot on the CompML3
is controlled using a rotary switch, which can be easily manipulated without taking
your eyes off the target, and even while wearing gloves.
22
I have trusted my life and accuracy to Aimpoint combat optics for more than
10 years, both operationally as a member of Australia’s SASR, and now training our nations war fighters as the Director of Training and Senior Firearms
& Tactics instructor at Redback One. I have seen other popular reflex sights
fail at the most critical moments. I choose my combat optics for reliability
and performance. If I had to go to war tomorrow, I would trust my life to
Aimpoint again!
Nothing performs like an Aimpoint sight.
Jason Falla
Director of Training, REDBACK ONE
23
Aimpoint®
Miscellaneous
Products
’
24
Specialized products for serious applications.
25
The Aimpoint 3XMag magnifying module is a high quality optic
that can be used with any Aimpoint sight for extended range
target identification and engagement. This high quality accessory
gives the shooter the best of both worlds: rapid CQB aiming with
an Aimpoint sight, and long range target acquisition in combination
with the magnifier. The Aimpoint TwistMount allows this transition
to occur effortlessly and in just a matter of seconds.
3XMag
The 3XMag is ideal for perimeter security and sniper support missions. The versatile 3XMag can also be used as a
handheld magnifying monocular for discrete observation
and target identification.
Features
From CQB to semi-sniping capability and vice versa in a split second.
• Ready to mount behind Aimpoint sights.
• Provides extended engagement range
to the operator.
• Combines the best of two worlds, CQB
and semi-sniping.
• Increases confidence, performance and
flexibility.
1
CQB capability
2
Place the 3XMag on the
TwistMount base
3
Turn clockwise into its
final position
• Extremely fast on/off quick change
mounting solution.
4
• Mounting and dismounting the magnifier has no influence on the point of
aim of your sight. No need to re-zero
the sight after adding or removing the
magnifier.
Semi-sniping capability
• Internal adjustments allow centering
the magnifier to your sight.
• Rubber armor increases ruggedness.
• Drilled and tapped for use with other
accessory mounts.
• Spacer available to accommodate a
wide variety of weapons.
Technical Specifications
Mechanical interface
Optical System
Magnification Objective diameter Field of view (FOV) Exit pupil diameter 3X
20 mm
7°
7 mm
Physical Specifications
Dimensions, L x W x H Weight Material housing
110 mm x 44 mm x 41 mm
(4.3” x 1.7” x 1.6”)
200 g (7.1 oz) including rubber cover
Anodized aluminum, dark grey,
rubber covered black
Environmental Specifications
Temperature range Humidity Water resistance 26
The recommended mount for the 3XMag is the
Aimpoint TwistMount, which allows for quick
attachment on any MIL-Std 1913 Picatinny Rail,
and also indexes the magnifier for co-witnessing
with Aimpoint sight and mount combinations.
The 3XMag can also be attached to aftermarket
flip to side mounts using the 4 drilled and tapped
screw holes located on the accessory plate
located on the bottom of the magnifier.
See page 36-37 for more details about the TwistMount.
-45° C to + 70° C, (-50° F - +160° F)
in operation and storage
0 – 100% condensing or non-condensing
Submersible to 20 m (67 ft)
27
CEU
The Aimpoint CEU (Concealed Engagement Unit) is the latest component
incorporated into Aimpoint’s unique System-of-Systems™ approach. It gives
the operator the ability to observe and/or engage a threat from a concealed
or covered position. The Aimpoint CEU easily rotates from side to side, so an
operator can safely look around either right or left-hand corners, over barricades and under vehicles. It can also be quickly removed in order to rapidly
return to direct engagement.
Physical Specifications
Dimensions L x W x H
Weight
Material housing
87 mm (3.4”) x 115 mm (4.5”) x 42 mm (1.7”)
135 grams (4.8 oz)
High strength, glass reinforced, PP polymer, black, non-glare finish
Features
• Designed to be compatible with all
Aimpoint sights.
• Constructed to provide a ‘true image’
NOT a reversed mirror reflection.
• Allows aiming over walls, under cars,
and around corners without direct
exposure to the threat.
• Does not affect the sight’s point of aim.
• Quick detach TwistMount can also be
used with Aimpoint 3X Magnifier, and
Night Vision Device rings.
• Small and lightweight.
• Easily removed from the weapon if
necessary.
• No need to equip a team member with
a specialized weapon or electronic
viewing device.
• Rotates a full 260°.
• Designed to withstand extreme conditions.
CEU
The Aimpoint CEU turns an operator’s standard weapon into a scouting tool that allows for
observation over walls, under vehicles or around corners without direct exposure to the threat.
The simple and rugged design of the CEU means that it is no longer necessary to rely on a single
team member with a specialized weapon or an expensive and fragile electronic device.
Since the Aimpoint CEU does not affect the sight´s point of aim, it can easily be passed from one
member of a unit to another as long as both weapons are outfitted with an Aimpoint TwistMount.
Engaging targets while using the CEU is simple and extremely effective. There is simply no other
device on the market using this same proven technology. The Aimpoint CEU is a patented system
developed by DSTO in Australia under the name “Off-Axis Viewing Device” (OAVD). Aimpoint
has world-wide exclusive rights for production and sales of this system outside of Australia.
28
Environmental Specifications
Mechanical Interface
Temperature Range, Storage -45° C to +71° C (-50° F to +160° F)
Temperature Range, Operating +5° C to +71° C (+41° F to +160° F) instantaneous
The Aimpoint CEU rotates a full 260° allowing the operator to
safely look around either right or left-hand corners, up staircases or down tunnels from almost any angle.
Humidity Immersion Featured on pictures below : CEU with Aimpoint® TwistMount™
(Base & high Top ring).
95% at 20° C (68° F) to 50° C (122° F), cycling
25 m (80 ft.)
Optical Specifications
Operating Principle
Optical Magnification
Clear Aperture
Optical Coating
Optical Signature
Dual mirror reflective device for true target view.
1x, unlimited eye relief.
25 mm “see through” diameter.
Anti-reflex coated optical elements and high-reflection mirrors for maximum light transmission, NVD compatible.
The unit does not influence the forward
optical signature.
See page 36-37 for more details about the TwistMount.
29
The Aimpoint MPS3 is a passive electronic reflex collimator sight designed
for use on medium or heavy weapons. Developed primarily for mounted
operations, the MPS3 is ideal for use on land vehicles, helicopters or fastattack boats and ships. Its simplicity of use is based on the “One Function
Principle” allowing the user to concentrate on the target, aim the weapon
with a single red-dot, and operate the sight controls just like when using a
standard Aimpoint sight.
MPS3
Export license/End-user certificate is required for this product.
Features
• 1X (non-magnifying) parallax free optic.
•Compatible with every generation of NVD.
•ACET technology combined with a AA
battery gives 80,000 hours (over 8
years) of typical usage on one battery.
•500,000 hours of use on NVD setting.
•Designed to stand up to recoil of heavy
weapons.
•One Function Principle for simplicity of
use in field.
•Manually adjustable reticule brightness.
• Accessory rails on sight allow for mounting IR or visible lasers.
•Multi Purpose Sight for use on land, air
and at sea.
• 7 night vision compatible settings, 9 day
settings of which one extra bright.
• 2 MOA dot size for long distance engagement.
• Can be used with any AA size battery.
MPS3
The Aimpoint MPS3 is a non-magnifying sight with unlimited eye relief, allowing rapid target
acquisition and greatly increased first-shot hit probability. The MPS3 features a manually
adjustable reticule brightness control for all light conditions. Thanks to its NVD compatibility, the MPS3 can be used 24 hours a day. Aimpoint’s revolutionary ACET technology
gives the Aimpoint MPS3 an impressive battery life of up to 80,000 hours
(8 years) of continuous use from a single AA battery!
The Aimpoint MGMount has been designed specifically for use with the MPS3. The MGMount contains a user friendly, 3-step ballistic compensator with preset range adjustments
at 200, 800 and 1200 meters (220, 875, 1310 yards). This ballistic compensation can be
quickly changed by the operator without losing eye contact with the target, and can be
accomplished even while wearing gloves. The MGMount is compatible with all M1913-Std
Picatinny rails. A separate QD rail adaptor for M2 BMG is also available.
Integrated Picatinny rails on top and side
for attachement of accessories such as a
laser aiming device
3- step ballistic compensator.
The MGMount can be bought separately.
For more information see page 36
For more information see page 36
30
31
Mounting solutions
LPI
The Aimpoint LPI, IR Laser Aiming Device is an eye safe, active infrared
aiming device for military and Law Enforcement applications. Designed for
use in darkness while wearing night vision goggles, the LPI projects a laser
aiming dot on the target, visible only to those wearing NVD´s.
The Aimpoint LPI can be mounted with any of the following interfaces.
LPI-S
LPI-Q
LPI-A
Mount for Aimpoint® standard ring Mount for Aimpoint® QR ring
Mount for ARMS ring
Rail
LPI-P
QR Mount for Picatinny
Features
• The intensity setting can be customized at the factory according to the
customers’ needs. 2 power levels can
be selected from 0,005-3,5mW. The
max and the min level can be separated by a factor of no more than 20.
• Laser axis fully adjustable.
• Powered with same battery type
(DL 1/3N) as some Aimpoint red dot
sights.
• Fits right on Aimpoint CompM2 and
CompM3 sights.
• Submersible to 10 meters (30 ft).
• The smallest military IR Laser Aiming
Device available on the market.
Technical Specifications
Article No. 10932
Light source
Setting High
Setting Low
Wavelength
840 nm (IR)*
840 nm (IR)*
Adjustment of laser beam
Power supply
Battery
LPI
The Aimpoint LPI is a perfect complement to the passive aiming
system of Aimpoint sights. This extremely compact laser can be
mounted directly on the top ring of an Aimpoint CompM2 or
CompM3 sight, or on any Picatinny rail using the correct adaptor. The LPI is an eye-safe IR laser designed for tactical team
use in building clearing or close combat conditions without
overpowering your night vision equipment or reflecting off of
interior surfaces.
32
Quantity
1
Beam output power
0.1 mW**
0.005 mW**
1 Click = 0.28 mrad
Power
3V
Beam Shape
5 x 2 mm
5 x 2 mm
Beam divergence
typ 0.5 mrad
typ 0.5 mrad
Adjustment range of laser beam
Size
DL1/3N, 2L76
Laser class
1**
± 20 mrad
Type
LiMn02
Unless indicated otherwise, the data is accurate at ambient room temperature and normal operating conditions
* Typical
** Important notice: Beam output power will be set as required by the user. The user is solely responsible for the observation of the applicable safety regulations. The max and the min level can be separated by a factor of no more than 20.
The LPI is not designed for long range target illumination. The
selector switch on the Aimpoint LPI allows the user to quickly
change the desired intensity of the IR beam. The LPI sighting
laser can be quickly adjusted for windage and elevation independent of the red dot sight it is mounted on. A remote on/off
switch with custom cable lengths allows the LPI to be activated
without the operator changing their grip on the weapon.
Export license/End-user certificate
is required for this product.
Note
To make the product complete, a cable with switch and a mount interface must be determined by
the user and ordered with the Aimpoint LPI. 4 different mounting solutions are available and the
cable is offered at customized length.
Reinforced cable
The lenght (y in mm) of the reinforced cable with waterproof
switch pad shall be measured as shown on the drawing beside:
33
Aimpoint®
Mounting Solutions
& Accessories
’
34
Accessories and mounts
for every application.
35
Mounting
Solutions
TwistMount
TwistMount Ring
Spacer
SRP-L
Low Wide Ring, 30 mm
Black, for CompM2,
ML2, M3 and ML3.
Fits on Picatinny rail
(MIL-STD 1913)
Art. No. 12243 *
Low Wide Ring, 30 mm
Black, for CompM2, ML2,
M3 and ML3.
Fits on Weaver rail
Art. No. 12244 *
For CompM2, ML2,
M3 and ML3. Base
and Top 30 mm ring.
Fits QRP2, QRW2,
LRP and TNP Mounts
Art. No. 12194 *
Quick Release Picatinny (MIL-STD 1913) Mount.
Fits CompM4 and Ring Base & Top. Return to
zero after dismounting (Spacer is necessary for
M4 flat top rifles and carbines)
Art. No. 12195 *
LRP Mount
Lever Release Picatinny Mount
for CompM4 and Ring Base & Top.
Return to zero after dismounting.
Screws, Allen key and thread sealer
included
Art. No. 12198
Standard Spacer
CEU High Rise ring
CEU Low Rise ring
Ring for CEU. Fits on
TwistMount Base 30 mm
height of optical axis
Art. No. 12202
Separate base
for TwistMount
Fits on Picatinny rail
(MIL-STD 1913)
Art. No. 12236
QRP2 Mount
Ring Base & Top
SRW-L
Separate ring
for TwistMount
Art. No. 12238 *
Spacer for Ring Base & Top and
Twist Mounts. Raises height of
optical axis from 30 to 39 mm
Art. No. 12227 *
TwistMount Base
Complete Quick Release
Mount for 3XMag and CEU
Fits on Picatinny rail
(MIL-STD 1913)
Art. No. 12234 *
Ring for CEU. Fits on
TwistMount Base 39 mm
height of optical axis
Art. No. 12203
QRW2 Mount
Quick Release Weaver Mount
Fits CompM4 and Ring Base & Top. Return to
zero after dismounting (Spacer is necessary
for M4 flat top rifles and carbines)
Art. No. 11758 *
Spacer for CompM4 and
CompM2/M3 in conjunction with
Art. No. 12194. Mount raises height
of optical axis from 30 to 39 mm
Art. No. 12192 *
Contains a 3-step ballistic compensation for 200,
800 and 1200 meters (220, 875, 1310 yards) distances.
The mount is also used to zero the MPS3 sight.
Export license/End-user certificate is required for
this product.
Art. No. 11925 *
NSN No. 1240-01-551-6720
Quick Release Picatinny
(MIL-STD 1913) Mount.
Fits CompC3, M3 and ML3
Art. No. 12923*
Extension Spacer
Spacer for CompM4 and
CompM2/M3 in conjunction with Art. No. 12194.
Mount raises height of optical axis from 30 to
39 mm and brings sight 40 mm forwards
Art. No. 12193 *
Micro LRP Mount
Micro 11 mm Dovetail Mount
Fits most of the 11 mm Dovetail
Bases ranging from 10-12,5 mm
Screws and Micro Tool included
Art. No. 12215
MGMount for MPS3
QRP3 Mount
Lever Release Picatinny Mount for Micro sights.
Return to zero after dismounting.
Screws, Micro tool and thread sealer included
Art. No. 12905 *
Micro Spacer Low
Micro Glock Mount
TNP Mount
Torsion Nut Picatinny
(MIL-STD 1913) Mount
Fits CompM4 and Ring Base & Top
Art. No. 12197 *
* Screws and Allen key included
Fits Glock pistols. Screws,
Micro Tool and Allen key
included
Art. No. 12437
For Micro T-1. Raises height of optical
axis to 30 mm. Four screws (torx),
Micro Tool and thread sealer included
Art. No. 12357
Micro Spacer High
For Micro T-1.
Raises height of optical axis to 39 mm for
cowitness with AR-15. Four screws (torx),
Micro Tool and thread sealer included
Art. No. 12358
* Screws and Allen key included
36
37
Warranty & Customer Service
Accessories
Warranty Information
Flip-up Front Cover
Flip-up Rear Cover
For PRO & Comp sights
Art. No. 12224
For PRO & Comp sights
Art. No. 12223
Flip-up Rear Cover
Transparent
Flip-up Front Cover
Transparent
For PRO & Comp sights
Art. No. 12240
For PRO & Comp sights
Art. No. 12241
ARD
KillFlash® filter for PRO & Comp sights
Art. No. 12239
Polarization Filter
Polarization Filter for reduction of
sun reflection. Fits rear of
PRO & Comp sights
Art. No. 12216
Lens Cover
Flip-Up Front Cover with ARD
For PRO, CompM2, CompML2 and
CompM3, CompML3 mounted with
Quick Release
Art. No. 12228
(open & closed) For PRO & Comp sights
Art. No. 12462
AA Battery
Alkaline
For CompM4
and MPS3
Art. No. 12242
Double Battery Kit
Micro Tool
Art. No. 12207
For PRO, CompM2, CompML2, and
CompM3, CompML3
Art. No. 12247
Rubber Bikini Lens Cover
For CompM4
Art. No. 12205
Rubber Bikini Lens Cover
For Micro sights
Art. No. 12204
Aimpoint values your business and always attempts
to provide you the very best of products and services.
That’s why we back our products with one of the best
guarantees in the industry.
Our products are guaranteed to be free from original
manufacturer defects in material and/or workmanship
under normal use from the date of purchase for ten (10)
years for personal use and two (2) years for professional
or competition use. If a defect that is covered by our warranty occurs during that period, Aimpoint, at its option,
will either repair, or replace the product.
Dealership Eligibility
For dealership eligibility and requirements please contact
the Aimpoint distributor or agent in your country. The
list of countries where Aimpoint is represented including
distributors and agents is available on our webpage at
www.aimpoint.com under “where to buy”.
’
Customer Service
Here at Aimpoint, we are delighted to have you as a
customer. In addition to offering the best products in
the marketplace, we are committed to providing our
valued customers with the finest customer service available. Our courteous and informed staff is ready to help.
All Rights Reserved
All Aimpoint products are covered by several international
patents. Comp is a registered trademark of Aimpoint AB,
Malmö, Sweden. We reserve the right to make design
and/or material modifications without further notice.
This printed material is for information purposes only
and does not constitute any binding obligation, or agreement by Aimpoint AB.
© 2013 Aimpoint AB
Why I trust Aimpoint
One of the questions you hear all the time is; ”why are Aimpoint sights so much more
expensive than other red dots?. Aren’t they all basically the same?” Well, the answer is
of course, “no, they are not”. Recently, I got to experience this difference myself. A few
months ago we were at a remote range doing some shooting and product testing. I was
switching optics back and forth on various carbines and when I got home I couldn’t find my
Micro T-1. I was NOT happy! A couple of searches of the area failed to locate the lost sight.
This past weekend we were back at this range (3 months since I lost the sight) and spent
some time searching with the help of a metal detector. After about 45 minutes my son
yells, “dad, I found it!” It had been completely buried under the sand.
I looked at my T-1, caked in sand and clay mud and just cringed. I washed the sight off and
found the dot was still lit! I dried it off, mounted it on my Wilson Recon 5.56 and shot some
targets. Amazingly, the sight was 100% good to go.
Might cheaper brands still have worked? Maybe, maybe not, but I know beyond any doubt
that I can trust Aimpoint sights to work when I need them, despite the occasional abuse.
DL1/3N, Lithium Battery
For PRO, CompM2,
CompML2, and CompM3,
CompML3
Art. No. 10315
38
CR 2032
Lithium Battery
For Micro sights
Art. No. 12211
Outer Rubber Cover
Color: Dark Earth Brown
Fits CompM3 & CompML3
Art. No. 12226
Outer Rubber Cover
Charles Coker
Tacticalgunreview.com
Color: Black
Fits CompM3 & CompML3
Art. No. 12225
39
Aimpoint®
System-of-Systems™
Integrated combat optics solution
Aimpoint has distinguished itself as a supplier of sophisticated
modular sighting systems, offering end users not just stand
alone products but rather complete modular optical solutions.
Although the primary focus for Aimpoint has always been the
CEU
In our System-of-Systems solution, the versatile TwistMount
enables accessories such as the Aimpoint 3XMag (magnification
module, see picture above) and the Aimpoint CEU (concealed
engagement unit, see picture above) to be rapidly fixed behind
Aimpoint sights. Night Vision Devices (NVD’s) of all types and
generations can also be added as part of this modular system.
40
electronic reflex collimator (red dot) sight. We also offer a
choice of modular accessories that can be used together with
Aimpoint sights in order to enhance an operator´s capabilities.
3XMag
Since the accessories are placed behind the red dot sight,
they do not affect the point of impact. Therefore, they can
easily be passed from one member of a unit to another as
long as both weapons are outfitted with the proper interface
– the base of the Aimpoint TwistMount which fits any MILSTD 1913 Picatinny rail.
There is simply no other device on the market using the
same technology. Aimpoint’s modular System-of-Systems
approach enables the operator to modify their equipment
for each specific mission, and to rapidly adapt to changing
conditions in the field.
41
Technical
Specifications
Micro T-1 CompM4, M4s •
•
•
•
•
-
•
•
•
•
-
•
Application Firearms
Pistol - Revolver
Carbine
PDW (personal weapon defence)
SMG (sub-machine gun)
LMG (light machine gun)
MMG (medium machine gun)
HMG (Heavy machine gun)
•
•
•
•
•
•
-
-
•
•
•
•
•
-
-
•
•
•
-
-
-
o
•
•
•
•
•
-
o
•
•
•
•
•
-
-
•
Technology
Working principle: Reflex collimator sight - red dot sight
x
x
x
x
x
x
x
x
4 or 2
x
x
x
x
x
x
x
2
x
x
x
x
x
x
x
2
x
x
x
x
x
Application area
Law Enforcement
Armed Forces - Special Units
PRO
CompM3 CompML3 MPS3
Optical Data
LED (Light Emitting Diode) totally eye-safe
Light source wavelength, 650 mn red light
Red dot size - in MOA (minutes of angle)*
Absence of parallax - No centering required
Unlimited eye relief
Band Pass coating for NVD**** compatibility
Anti-reflex coating all surfaces & multi-layer coating objective lens No magnification (1X)
x
x
x
x
4 or 2
4 or 2
x
x
x
x
x
x
x
x
x
x
x
2
x
x
x
x
x
Electronic Data
One 3V Lithium battery, type
CR2032
2L76 or DL1/3N
2L76 or DL1/3N
2L76 or DL1/3N
One AA battery, accepts 1.5-5V
x
x
Battery life in hours***
50 000 on setting 8 80 000 on setting 12 30 000 on setting 7
50 000 on setting 7
50 000 on setting 7 80 000 on setting 12
Battery life, in hours***, NVD position
500 000
500 000
300 000
500 000
500 000
Manual rotary switch - Dot intensity regulator
x
x
x
x
x
x
Daylight (DL) settings
1 Off & 9 DL
NVD and daylight (DL) settings 1 Off, 4 NVD & 8 DL of
7 NVD & 9 DL of
4 NVD & 6 DL of
4 NVD & 6 DL of
7 NVD & 9 DL of
which one extra bright which one extra bright which one extra bright
which one extra bright
which one extra bright
Mechanical data
Material housing, extruded high strength aluminum
x
x
x
x
x
x
Surface finish, hard anodized, matte
x
x
x
x
x
x
Color black
x
x
x
x
x
x
Material lens covers -Thermoplastic Elastomer, black matte
x
x
x
Material lens covers - rubber - black - matte
x
x
x
Adjustment 1 click = 13 mm at 100 m
16 mm at 100 m
16 mm at 100 m
16 mm at 100 m
16 mm at 100 m
50 mm at 100m
1/2” at 100 yds
1/2” at 80 yds
1/2” at 100 yds
1/2” at 100 yds
1/2” at 100 yds
2” at 100yds
Mounting methods Integrated mount
Integrated Integrated QRP2
1 ring - 30 mm
1 ring - 30 mm
Integrated MGMount
quick release mount
(Quick release)
Environmental data
Temperature range -45° - +71° C (50°- +160° F)
Water resistance - submersible to No radioactive components used
x
25 m (80 ft)
x
x
45 m (150 ft)
x
x
45 m (150 ft)
x
x
45 m (150 ft)
x
x
45 m (150f t)
x
x
1m (3ft.)
x
Dimensions
Length
62 mm (2.4”)
120 mm (4.7”)
130 mm (5.1”)
130 mm (5.1”)
130 mm (5.1”)
175 mm (6.9”)
Width/height - sight only
41 x 36 mm
53 x 60 mm
55 x 55 mm
55 x 55 mm
55 x 55 mm
84 x 81mm
(1.6” x 1.4”)
(2.1” x 2.4”)
(2.2” x 2.2”)
(2.2” x 2.2”)
(2.2” x 2.2”)
(3.3” x 3.2”)
Width/height - including mount
62 x 41mm
72 x 72 mm
75 x 75 mm
84 x 124 mm
(2.4” x 1.6”)
(2.8” x 2.8”)
(2.95” x 2.95”) (3.3” x 4.9”)
Maximum ring width
30 mm
30 mm
30 mm
Weight - sight only 84 g (3.0 oz)
265 g (9.3 oz)
220 g (7.8 oz)**
220 g (7.8 oz)**
220 g (7.8 oz)**
720 g (25.4 oz)
Weight - sight with integrated mount
105 g (3.7oz)
335 g (11.8 oz)
330 g (11.6 oz)
Weight rubber cover
50 g (1.7 oz)
50 g (1.7 oz)
• primary use o secondary use - not recommended x applies for
* MOA (minute of angle) 1 MOA ≈ 30 mm at 100 meters ≈ 1” at 100 yards ** Dimensions and weights for PRO, CompM2, ML2, M3, ML3 are given with flip-up lens covers *** at room temperature
**** Night Vision Device
Specifications are subject to change without notice.
42
43
Download PDF
Similar pages