L2+ Industrial 8-Port 10/100/1000T 802.3af PoE

IGS-10020PT
L2+ Industrial 8-Port 10/100/1000T 802.3af PoE + 2-Port 100/1000X
SFP Managed Switch with Wide Operating Temperature
Physical Port
• 8 10/100/1000BASE-T Gigabit Ethernet RJ45 ports with
IEEE 802.3af / 802.3at PoE Injector
• 2 100/1000BASE-X mini-GBIC/SFP slots for SFP type auto
detection
–– One RJ45 console interface for basic management and
setup
Power over Ethernet
• Complies with IEEE 802.3af / IEEE 802.3at Power over
Ethernet / end-span PSE
• Up to 8 IEEE 802.3af / 802.3at devices powered
Environmentally Hardened Design
PLANET Industrial 8-Port Gigabit 802.3af PoE Switch, IGS-10020PT, is equipped with a
rugged IP30 metal case for stable operation in heavy Industrial demanding environments.
Besides, the IGS-10020PT provides a high level of immunity against electromagnetic
interference and heavy electrical surges which are usually found on plant floors or in
curbside traffic control cabinets. Being able to operate in wide temperature range from -40
to 75 degrees C, the IGS-10020PT can be placed in almost any difficult environment. The
IGS-10020PT, which takes up little space, can be mounted on a DIN rail or wall.
• Supports PoE power up to 30.8 watts for each PoE port
• Auto detects powered device (PD)
• Circuit protection prevents power interference between ports
• Remote power feeding up to 100m
• PoE management features
–– IEEE 802.3af and IEEE 802.3at mode switch control
–– Total PoE power budget control
–– Per port PoE function enable/disable
–– PoE admin-mode control
–– PoE port power feeding priority
–– Per PoE port power limit
–– PD classification detection
–– Temperature Threshold Control
–– PoE Usage Threshold Control
–– PD Alive Check
–– PoE schedule
Industrial Case & Installation
• IP30 aluminum case protection
• DIN rail and wall-mount design
Redundant Ring Protocol Suitable for Surveillance System
As the IGS-10020PT supports redundant ring technology, it has the capability of rapid
self-recovery to prevent interruptions and external intrusions. It incorporates advanced
Redundant Ring technology, Spanning Tree Protocol (802.1w RSTP), and redundant
power supply system into customer’s industrial automation network to enhance system
reliability and uptime in harsh factory environments. The IGS-10020PT also protects
customer’s industrial network connectivity with switching recovery capability that is used
for implementing fault tolerant ring and mesh network architectures. If the Industrial
network is interrupted accidentally, the recovery time could be less than 50ms to quickly
bring the network back to normal operation.
• 48V DC, redundant power with polarity reverse protect
function
• Supports EFT protection of 6000 VDC for power line
• Supports 6000 VDC Ethernet ESD protection
• -40 to 75 degrees C operating temperature
Digital Input & Digital Output
• 2 Digital Input (DI)
• 2 Digital Output (DO)
• Integrate sensors into auto alarm system
• Transfer alarm to IP network via email and SNMP trap
1
IGS-10020PT
ERPS Ring for Video Transmission Redundancy
Layer 2 Features
• Prevents packet loss with back pressure (half-duplex) and
IEEE 802.3x pause frame flow control (full-duplex)
Outdoor
PoE IP Camera
PoE
Outdoor
PoE IP Camera
PoE
• High performance of Store-and-Forward architecture and
runt/CRC filtering eliminates erroneous packets to optimize
PoE
PoE
1000
the network bandwidth
IGS-10020PT
• Storm Control support
Traffic Control Center
1000
IGS-10020PT
Outdoor
PoE IP Camera
PoE
–– Broadcast/Multicast/Unicast
• Supports VLAN
PoE
–– IEEE 802.1Q tagged VLAN
Recovery time < 20 ms
–– Up to 255 VLANs groups, out of 4094 VLAN IDs
1000
1000
–– Provider Bridging (VLAN Q-in-Q) support (IEEE
Network Video
Recorder
IGS-10020PT
1000
1000BASE-SX/LX Fiber-optic
PoE
1000BASE-T UTP with PoE
802.1ad)
–– Private VLAN Edge (PVE)
Built-in Unique PoE Functions for Surveillance Management
–– Protocol-based VLAN
As a managed PoE Switch for surveillance network, the IGS-10020PT features intelligent
–– MAC-based VLAN
PoE management functions:
–– Voice VLAN
• Supports Spanning Tree Protocol
■ PD Alive Check
■ Scheduled Power Recycling
–– IEEE 802.1D Spanning Tree Protocol (STP)
■ SMTP/SNMP Trap Event Alert
–– IEEE 802.1w Rapid Spanning Tree Protocol (RSTP)
■ PoE Schedule
–– IEEE 802.1s Multiple Spanning Tree Protocol (MSTP),
spanning tree by VLAN
Intelligent Alive Check for Powered Device
The IGS-10020PT PoE Switch can be configured to monitor connected PD’s status in real
time via ping action. Once the PD stops working and responding, the IGS-10020PT will
recycle the PoE port power and bring the PD back to work. It also greatly enhances the
reliability to ensure that the PoE port will reset the PD power, thus reducing administrator’s
management burden.
Step 2
PoE Camera
Step 3
PT PoE Camera
No Response!
ON
Ping Request
Checking alive status for 3 times
–– 802.3ad Link Aggregation Control Protocol (LACP)
–– Cisco ether-channel (static trunk)
–– Maximum 5 trunk groups, up to 8 ports per trunk group
• Provides port mirror (1-to-1)
• Port mirroring to monitor the incoming or outgoing traffic on
a particular port
PoE
Ping Request
• Supports Link Aggregation
–– −Up to 16Gbps bandwidth (duplex mode)
PoE PD Alive-checking
Step 1
–– BPDU Guard
OFF
Restart PoE device if without response
PoE Schedule for Energy Saving
Under the trend of energy saving worldwide and contributing to environmental protection
on the Earth, the IGS-10020PT can effectively control the power supply besides its
capability of giving high watts power. The built-in “PoE schedule” function helps you to
enable or disable PoE power feeding for each PoE port during specified time intervals and
it is a powerful function to help SMBs or enterprises save power and money.
• Loop protection to avoid broadcast loops
• Supports ERPS (Ethernet Ring Protection Switching)
Layer 3 IP Routing Features
• Supports maximum 32 software static routes and route
summarization
Quality of Service
• Ingress Shaper and Egress Rate Limit per port bandwidth
control
• 8 priority queues on all switch ports
8 AM
5 PM
5 PM
8 AM
• Traffic classification
–– IEEE 802.1p CoS
–– IP TOS/DSCP/IP precedence
–– IP TCP/UDP port number
PoE
PoE
PoE
PoE
PoE
PoE
PoE
PoE
–– Typical network application
• Strict priority and Weighted Round Robin (WRR) CoS
Power
On
Power
On
Power
On
Power
On
6 Watts
6 Watts
12 Watts
12 Watts
Total Consumption: 36 watts / hr
Power
Off
Power
Off
Power
Off
Power
On
6 Watts
6 Watts
12 Watts
12 Watts
policies
• Supports QoS and In/Out bandwidth control on each port
Save 24 watts / hr during off-business hours
Total Saved = 10800watts / month
PoE
1000BASE-TX UTP with PoE
2
IGS-10020PT
Digital Input and Digital Output for External Alarm
• Traffic-policing policies on the switch port
The IGS-10020PT supports Digital Input and Digital Output on its front panel. This external
• DSCP remarkin
alarm enables users to use Digital Input to detect and log external device status (such as
door intrusion detector), and send event alarm to the administrators. The Digital Output
Multicast
could be used to alarm the administrators if the IGS-10020PT port shows link-down, link-up
• Supports IGMP snooping v1, v2 and v3
or power failure.
• Supports MLD snooping v1 and v2
• Querier mode support
Digital Input
• IGMP snooping port filtering
Uplink
• MLD snooping port filtering
• MVR (Multicast VLAN Registration)
I/O
I/O
I/O
I/O
Enclosure
Security
Enclosure
Door Detector
(Door Open)
Door Detector
(Door Closed)
Security OK
System
Log
Mail
Alarm Warning
SNMP
TRAP
Alarm Messaging
• IEEE 802.1x Port-based/MAC-based network access
authentication
• Built-in RADIUS client to cooperate with the RADIUS servers
• TACACS+ login users access authentication
• RADIUS/TACACS+ users access authentication
Digital Output
• IP-based Access Control List (ACL)
• MAC-based Access Control List
• Source MAC/IP address binding
I/O
I/O
I/O
I/O
• DHCP snooping to filter distrusted DHCP messages
• Dynamic ARP Inspection discards ARP packets with invalid
MAC address to IP address binding
• IP Source Guard prevents IP spoofing attacks
• IP address access management to prevent unauthorized
intruder
DC Power Failure
RJ-45 Cable
Link Down
Fiber Cable
Link Down
Management
• Switch Management Interfaces
Layer 3 IPv4/IPv6 Software VLAN Routing for Secure and Flexible Management
–– Console/Telnet Command Line Interface
To help customers stay on top of their businesses, the IGS-10020 series not only provides
–– Web switch management
ultra high transmission performance and excellent Layer 2 technologies, but also IPv4/IPv6
–– SNMP v1 and v2c switch management
software VLAN routing feature which allows to crossover different VLANs and different IP
–– SSH/SSL and SNMP v3 secure access
addresses for the purpose of having a highly-secured, flexible management and simpler
• Four RMON groups (history, statistics, alarms, and events)
networking application.
• IPv6 IP address/NTP/DNS management
• Built-in Trivial File Transfer Protocol (TFTP) client
Robust Layer 2 Features
• BOOTP and DHCP for IP address assignment
The IGS-10020PT can be programmed for advanced switch management functions
• Firmware upload/download via HTTP/TFTP
such as dynamic port link aggregation, Q-in-Q VLAN, private VLAN, Rapid Spanning
• DHCP Relay
Tree Protocol, Layer 2 to Layer 4 QoS, bandwidth control and IGMP snooping. The IGS-
• DHCP Option 82
10020PT provides 802.1Q tagged VLAN, and the VLAN groups allowed will be maximally
up to 255. Via aggregation of supporting ports, the IGS-10020PT allows the operation of a
high-speed trunk combining multiple ports. It enables a maximum of up to 5 trunk groups
with 8 ports per trunk group, and supports fail-over as well.
Efficient Management
For efficient management, the IGS-10020PT Managed Ethernet Switch is equipped
with console, Web and SNMP management interfaces. With the built-in Web-based
management interface, the IGS-10020PT offers an easy-to-use, platform-independent
management and configuration facility. For text-based management, the IGS-10020PT
can be accessed via Telnet and the console port. Moreover, it also offers secure remote
–– User Privilege levels control
–– Network Time Protocol (NTP)
–– Link Layer Discovery Protocol (LLDP)
–– SFP-DDM (Digital Diagnostic Monitor)
–– Cable diagnostic technology provides the mechanism to
detect and report potential cabling issues
–– Reset button for system reboot or reset to factory
default
–– PLANET Smart Discovery Utility for deployment
management
management via any standard-based management software by supporting SNMPv3
connection which encrypts the packet content at each session.
3
IGS-10020PT
Powerful Security
The IGS-10020PT offers comprehensive Layer 2 to Layer 4 Access Control List (ACL) for enforcing security to the edge. It can be used to restrict network
access by denying packets based on source and destination IP address, TCP/UDP ports or defined typical network applications. Its protection mechanism
also comprises 802.1x Port-based and MAC-based user and device authentication. With the private VLAN function, communication between edge ports can
be prevented to ensure user privacy. The network administrators can now construct highly-secured corporate networks with considerably less time and effort
than before.
Flexibility and Extension Solution
The two mini-GBIC slots built in the IGS-10020PT support dual speed, 100BASE-FX and 1000BASE-SX/LX SFP (Small Form-factor Pluggable) fiberoptic modules, meaning the administrator now can flexibly choose the suitable SFP transceiver according to not only the transmission distance but also the
transmission speed required. The distance can be extended from 550 meters (multi-mode fiber) to 10/50/70/120 kilometers (single-mode fiber or WDM fiber).
They are well suited for applications within the enterprise data centers and distributions.
Perfect Integration Solution for Outdoor IP PoE Camera and NVR System
The IGS-10020PT provides 8 10/100/1000Mbps 802.3at PoE+ ports and can offer sufficient PoE power to 8 PoE IP cameras at the same time. In addition,
with the 2 100/1000BASE-X SFP interfaces, the IGS-10020PT can connect to core fiber switch and send video stream to NVR and monitoring center.
Through the high-performance switch architecture, the IGS-10020PT facilitates the recorded video files from the 8 PoE IP cameras to be saved in the
NVR systems. Furthermore, the NVR systems can be controlled and monitored both in the local LAN and the remote site via Internet. The IGS-10020PT
undoubtedly brings an ideal secure surveillance system at a lower total cost.
550m / 10km / 120km
Control Center
PoE IP Camera
PoE IP Camera
Fiber Switch
PoE
PoE
1000
Data
100m
DC
Power
1000
1000BASE-SX/LX Fiber-optic
PoE
1000BASE-T UTP with PoE
DC
Power Line (DC)
DC 48V
IGS-10020PT
4
IGS-10020PT
Applications
Industrial Area Department/Workgroup PoE Switch
Providing up to 8 PoE, in-line power interfaces, the IGS-10020PT can easily build a power centrally controlled by IP phone system, IP camera system, or
wireless AP group for Industrial network. For instance, 8 PoE IP cameras or wireless access points can be easily installed around the corner in the industrial
environment for surveillance demands or for a wireless roaming network. Without the power-socket limitation, the IGS-10020PT makes the installation of IP
cameras or wireless AP easier and more efficient.
VoIP Phone
Wireless AP
PoE IP Camera
PoE
PoE
PoE
PoE
PoE
PoE
1000
Core
Fiber Switch
IGS-10020PT
1000
PoE
PoE
PoE
PoE
PoE
PoE
|O|O|
Security Gate
Access Control
Serial Server
IP Camera
1000
1000BASE-SX/LX Fiber-optic
PoE
100BASE-TX UTP with PoE
PoE
1000BASE-T UTP with PoE
|O|O|
Serial Line (RS-XXX)
Transportation – Wireless and IP Surveillance
In modern times, Internet service is most in demand during travel times, either for business or for leisure. Wireless LAN would be more efficient for the
transportation station to provide high-speed and wide area Internet services for travelers. With the PoE wireless LAN APs connected to the IGS-10020PT
that provides long-distance fiber capability, people can experience the wireless LAN roaming service within the Wi-Fi coverage even when the transportation
itself like train, bus or ship is on the move. By adopting PoE wireless LAN structure, the transportation authority gains benefit from costing less while
providing better Internet services in wider areas for the travelers. On the other hand, the PoE IP surveillance system deployed helps watch the transportation
security and PoE IP telephony system improves the voice communication in the station at a lower cost.
Central Management Center
PoE Wireless AP (PD)
N
N
N
N
PoE
PoE
N
N
PoE
PoE
PoE IP Camera
IGS-10020PT
IGS-10020PT
1000
N
N
N
1000
PoE
N
802.3af Wireless AP
1000
PoE
PoE Wireless AP
Core Switch
PoE
PoE
N
PoE IP Camera
Airport
N
PoE IP Camera
Train Station
100BASE-TX UTP
PoE
1000BASE-T UTP with PoE
DC
Power Line (DC)
1000BASE-SX/LX Fiber-optic
1000
N
2.4GHz 802.11n
5
IGS-10020PT
Specifications
Product
IGS-10020HPT
Hardware Specifications
Version
2
Copper Ports
8 10/100/1000BASE-T RJ45 auto-MDI/MDI-X ports
SFP/mini-GBIC Slots
2 1000BASE-SX/LX/BX SFP interfaces (Port-9 and Port-10)
Compatible with 100BASE-FX SFP
Console
1 x RJ45-to-RS-232 serial port (115200, 8, N, 1)
Switch Architecture
Store-and-Forward
Switch Fabric
20Gbps/non-blocking
Throughput (packet per second)
14.8Mpps@ 64Bytes packet
Address Table
8K entries, automatic source address learning and aging
Shared Data Buffer
4Mbits
Flow Control
IEEE 802.3x pause frame for full-duplex
Back pressure for half-duplex
Jumbo Frame
9Kbytes
Reset Button
< 5 sec: System reboot
> 5 sec: factory default
ESD Protection
6KV DC
EFT Protection
6KV DC
Enclosure
IP30 aluminum case
Installation
DIN rail kit and wall-mount kit
Connector
Removable 6-pin terminal block for power input
Pin 1/2 for Power 1; Pin 3/4 for fault alarm; Pin 5/6 for Power 2
Removable 6-pin terminal block for DI/DO interface
Pin 1/2 for DI 1 & 2, Pin 3/4 for DO 1 & 2, Pin 5/6 for GND
Alarm
One relay output for power fail. Alarm relay current carry ability: 1A @ DC 24V
DI/DO
2 Digital Input (DI): Level 0: -24V~2.1V (±0.1V)
Level 1: 2.1V~24V (±0.1V)
Input Load to 24V DC, 10mA max.
2 Digital Output (DO): Open collector to 24VDC, 100mA max.
LED Indicator
System:
Power 1 (Green)
Power 2 (Green)
Fault Alarm (Green)
Ring (Green)
Ring Owner (Green)
Per 10/100/1000T RJ45 Ports:
PoE-in-Use (Orange)
LNK/ACT (Green)
Per SFP Interface:
1000 (Orange)
LNK/ACT (Green)
Dimensions (W x D x H)
152 x 107 x 72 mm
Weight
1684g
Power Requirements
DC 48V
Power Consumption
31.9 watts/108.78BTU (Full loading without PoE function)
161.9 watts/522.08BTU (Full loading with PoE function)
Power Over Ethernet
PoE Standard
IEEE 802.3af Power over Ethernet/PSE
PoE Power Supply Type
End-span
PoE Power Output
Per Port 48V DC, 350mA; max. 15.4 watts
Power Pin Assignment
1/2(+), 3/6(-)
PoE Power Budget
130W maximum (depending on power input)
Max. number of Class 2 PDs
8
Max. number of Class 3 PDs
8
Layer 2 Function
Basic Management Interfaces
Console; Telnet; Web browser; SNMP v1, v2c
Secure Management Interfaces
SSH, SSL, SNMP v3
Port Configuration
Port disable/enable
Auto-negotiation 10/100/1000Mbps full and half duplex mode selection
Flow control disable/enable
Power saving mode control
6
IGS-10020PT
Port Status
Display each port’s speed duplex mode, link status, flow control status, auto negotiation status, trunk status
Port Mirroring
TX/RX/both
1 to 1 monitoring
VLAN
802.1Q tagged based VLAN, up to 255 VLAN groups
Q-in-Q tunneling
Private VLAN Edge (PVE)
MAC-based VLAN
Protocol-based VLAN
Voice VLAN
MVR (Multicast VLAN Registration)
Up to 255 VLAN groups, out of 4094 VLAN IDs
Link Aggregation
IEEE 802.3ad LACP/static trunk
Supports 5 trunk groups with 8 ports per trunk
QoS
Traffic classification based, strict priority and WRR
8-level priority for switching
- Port number
- 802.1p priority
- 802.1Q VLAN tag
- DSCP/TOS field in IP packet
IGMP Snooping
IGMP (v1/v2/V3) snooping, up to 255 multicast groups
IGMP querier mode support
MLD Snooping
MLD (v1/v2) snooping, up to 255 multicast groups
MLD querier mode support
Access Control List
IP-based ACL/MAC-based ACL
Up to 123 entries
Bandwidth Control
Per port bandwidth control
Ingress: 500Kb~1000Mbps
Egress: 500Kb~1000Mbps
SNMP MIBs
RFC 1213 MIB-II
IF-MIB
RFC 1493 Bridge MIB
RFC 1643 Ethernet MIB
RFC 2863 Interface MIB
RFC 2665 Ether-Like MIB
RFC 2819 RMON MIB (Groups 1, 2, 3 and 9)
RFC 2737 Entity MIB
RFC 2618 RADIUS Client MIB
RFC 2933 IGMP-STD-MIB
RFC 3411 SNMP-Frameworks-MIB
IEEE 802.1X PAE
LLDP
MAU-MIB
Layer 3 Function
IP Interfaces
Max. 8 VLAN interfaces
Routing Table
Max. 32 routing entries
Routing Protocols
IPv4 software static routing
IPv6 software static routing
Standards Conformance
Regulatory Compliance
FCC Part 15 Class A, CE
Stability Testing
IEC60068-2-32 (free fall)
IEC60068-2-27 (shock)
IEC60068-2-6 (vibration)
Standards Compliance
IEEE
IEEE
IEEE
IEEE
IEEE
IEEE
IEEE
IEEE
IEEE
IEEE
IEEE
IEEE
IEEE
802.3 10BASE-T
802.3u 100BASE-TX/100BASE-FX
802.3z Gigabit SX/LX
802.3ab Gigabit 1000T
802.3x flow control and back pressure
802.3ad port trunk with LACP
802.1D Spanning Tree Protocol
802.1w Rapid Spanning Tree Protocol
802.1s Multiple Spanning Tree Protocol
802.1p Class of Service
802.1Q VLAN tagging
802.1x Port Authentication Network Control
802.1ab LLDP
7
IGS-10020PT
Standards Compliance
IEEE 802.3af Power over Ethernet
RFC 768 UDP
RFC 793 TFTP
RFC 791 IP
RFC 792 ICMP
RFC 2068 HTTP
RFC 1112 IGMP v1
RFC 2236 IGMP v2
Environment
Operating Temperature
-40 ~ 75 degrees C
Storage Temperature
-40 ~ 85 degrees C
Humidity
5 ~ 95% (non-condensing)
Top View
DI 0 DI 1 DO 0 DO 1 GND GND
V1+ V1- 1A@24V
DC1
Fault
V2- V2+
Mounting Kit
DC2
Input DC 48V
Side View
Front View
Side View
Rear View
Console
P1 P2 FAULT
Ring R.O.
115200,N,8,1
9
10
LNK
ACT
1000 LNK/ACT 1000 LNK/ACT
9
10
100/1000X SFP
RESET
LNK
ACT
PoE In-Use
7
8
5
6
3
4
1
2
DIN-Rail Kit
802.3af PoE
10/100/1000T
IGS-10020PT
Bottom View
Mounting Kit
Dimensions ( unit = mm )
8
IGS-10020PT
Ordering Information
IGS-10020PT
Industrial 8-Port 10/100/1000T 802.3af PoE + 2 100/1000X SFP Managed Switch (-40~75 Degrees C)
Available Modules for IGS-10020PT
• 1000Mbps SFP transceiver modules
MGB-GT
SFP-Port 1000BASE-T Module
MGB-SX
SFP-Port 1000BASE-SX mini-GBIC module - 550m
MGB-SX2
SFP-Port 1000BASE-SX mini-GBIC module - 2km
MGB-LX
SFP-Port 1000BASE-LX mini-GBIC module - 10km
MGB-L30
SFP-Port 1000BASE-LX mini-GBIC module - 30km
MGB-L50
SFP-Port 1000BASE-LX mini-GBIC module - 50km
MGB-L70
SFP-Port 1000BASE-LX mini-GBIC module - 70km
MGB-L120
SFP-Port 1000BASE-LX mini-GBIC module - 120km
MGB-LA10
SFP-Port 1000BASE-LX (WDM,TX:1310nm) mini-GBIC module - 10km
MGB-LB10
SFP-Port 1000BASE-LX (WDM,TX:1550nm) mini-GBIC module - 10km
MGB-LA20
SFP-Port 1000BASE-LX (WDM,TX:1310nm) mini-GBIC module - 20km
MGB-LB20
SFP-Port 1000BASE-LX (WDM,TX:1550nm) mini-GBIC module - 20km
MGB-LA40
SFP-Port 1000BASE-LX (WDM,TX:1310nm) mini-GBIC module - 40km
MGB-LB40
SFP-Port 1000BASE-LX (WDM,TX:1550nm) mini-GBIC module - 40km
MGB-TSX
SFP-Port 1000BASE-SX mini-GBIC module - 550m (-40 ~ 75 degrees C)
MGB-TLX
SFP-Port 1000BASE-LX mini-GBIC module - 10km (-40 ~ 75 degrees C)
MGB-TL30
SFP-Port 1000BASE-LX mini-GBIC module - 30km (-40 ~ 75 degrees C)
MGB-TL70
SFP-Port 1000BASE-LX mini-GBIC module - 70km (-40 ~ 75 degrees C)
• 100Mbps SFP transceiver modules
MFB-FX
SFP-Port 100BASE-FX Transceiver (1310nm) - 2km
MFB-F20
SFP-Port 100BASE-FX Transceiver (1310nm) - 20km
MFB-F40
SFP-Port 100BASE-FX Transceiver (1310nm) - 40km
MFB-F60
SFP-Port 100BASE-FX Transceiver (1310nm) - 60km
MFB-FA20
SFP-Port 100BASE-BX Transceiver (WDM,TX:1310nm) - 20km
MFB-FB20
SFP-Port 100BASE-BX Transceiver (WDM,TX:1550nm) - 20km
MFB-TFX
SFP-Port 100BASE-FX Transceiver (1310nm) - 2km (-40 ~ 75 degrees C)
MFB-TF20
SFP-Port 100BASE-FX Transceiver (1310nm) - 20km (-40 ~ 75 degrees C)
PLANET Technology Corporation
11F., No.96, Minquan Rd., Xindian Dist., New Taipei City
231, Taiwan (R.O.C.)
Tel: 886-2-2219-9518 Fax: 886-2-2219-9528
Email: sales@planet.com.tw www.planet.com.tw
IGS-10020PT
PLANET reserves the right to change specifications without prior notice. All brand names and trademarks are property of
their respective owners. Copyright © 2016 PLANET Technology Corp. All rights reserved.
9
Download PDF
Similar pages