WLA Series Wireless LAN Access Points (WLA371

DATASHEET
WLA Series Wireless
LAN Access Points
WLA371, WLA422, WLA321,
WLA322, WLA522, WLA532,
WLA632
Product Overview
The Juniper Networks WLA Series
Wireless LAN Access Points provide
client access, spectrum analysis,
bridging, and wireless mesh services
for indoor and outdoor deployments
of enterprise wireless LANs (WLANs).
Configured and controlled by Juniper
Networks WLC Series Wireless LAN
Controllers, the WLA Series performs
deep packet inspection, encryption,
traffic forwarding, and security
enforcement locally, which results
in optimized traffic flows, radically
reduced latency, and massive
scalability.
Product Description
The Juniper Networks® WLA Series Wireless LAN Access Points provide complete client
access, spectrum analysis, mesh, and bridging services. Featuring support for 802.11a/b/g
as well as 802.11n, the WLA Series provides seamless mobility both indoors and outdoors,
and it enables scalable deployment of wireless voice over IP (VoIP), video, and real-time
location services.
The WLA Series comes with complete security and networking services, along with
advanced performance and scalability features which enable the access points to offload
controllers by inspecting and forwarding traffic locally and performing encryption and
security enforcement at the access point. The WLA Series also provides band steering,
client load balancing, dynamic authorization, quality of service (QoS), bandwidth controls
and dynamic call admission control (CAC)—all of which combine to ensure a more
consistent user experience as traffic is more evenly distributed across controllers, access
points, and radios. This also improves scalability, providing the same consistent user
experience for thousands of mobile users and devices.
The WLA Series is simple to deploy and can easily be configured and managed remotely.
Once installed, the WLA Series access points automatically monitor the data integrity and
radio frequency (RF) signal strength of wireless channels, and continually tune for optimal
RF channel and transmit power. Continuous scanning of the RF spectrum also allows
early detection, classification, avoidance and remediation of performance degrading
interference sources.
WLA Series access points enforce stringent prioritization of delay sensitive traffic for voice
and other critical applications and provide granular quality of service (QoS), and bandwidth
management capabilities on a per application, per user or per SSID basis. Wi-Fi Multimedia
(WMM) or SpectraLink Voice Priority (SVP) can be configured to ensure optimal QoS for voice
traffic. Access point policies allow per user, protocol or class-of-service (CoS) mapping.
WLA Series access points may also be deployed in branch locations away from a main
campus in a controller-less plug and play deployment model. This reduces the cost
and complexity of installing wireless access in remote sites. They can be managed via
the WAN or through the Internet by controllers at headquarters, and will maintain local
session persistence indefinitely, if the WAN link goes down. If the connection to the
controller is lost, wireless services continue uninterrupted; connected clients maintain
wireless connection to the AP, new clients can connect and authenticate locally, and the
Wireless Intrusion Detection System (WIDS) continues. Furthermore, the new country
code override feature in the remote AP profile allows the AP’s channel and transmit
power to be set to meet the specific country’s regulatory requirement where it is located,
independent of the location of the WLAN controller which is managing it.
1
Branch Office
Tablet
Wi-Fi phone
WLC2800
WLC880
Secure
LAN-extension
WAN
WLA321/
WLA322
LAN
WLA632
AAA
WLA632
5 GHz Mesh
Simultaneous
spectrum scanning
and client access
PDA
WLA522E
Notebook
Annex Building
WLA532
Tablet
Client Access
Figure 1: WLA Series Access Points provide client access, spectrum analysis, mesh, and bridging services
Table 1: Indoor and Outdoor Wireless Access Point Products
Product
Description
Indoor Wireless Access Points
WLA371*
• Single-radio indoor access point for 802.11a or 802.11b/g
WLA422
• Dual-radio indoor access point for 802.11a/b/g
• Supports entry-level deployments with data and voice connectivity
WLA321
• Single-radio indoor access point for 802.11a/b/g/n
• Suitable for low to medium client density deployments
WLA322
• Dual-radio indoor access point for 802.11a/b/g/n
• Suitable for low to medium client density deployments
WLA522
• Dual-radio 2x2 MIMO:2SS high-performance indoor access point for 802.11a/b/g/n
• Optimized for high client density deployments requiring high capacity
• Available with external antenna ports for use with indoor or outdoor antennas
WLA532
• Dual Radio 3x3 MIMO:3SS highest performance indoor access point for 802.11a/b/g/n with attractive packaging
• Optimized for very high client density deployments requiring highest capacity and coverage with data, voice and video
applications
Outdoor Wireless Access Points
WLA632
• • Dual-radio 3x3 MIMO:2SS high-performance outdoor access point for 802.11 a/b/g/n
• • Ruggedized, weatherproof enclosure suitable for extreme outdoor environments
• • Supports high-performance client access, long distance bridging, and mesh services
Features and Benefits
RF Management
Security
The WLA Series plays a key role in rogue and intrusion detection
as well as denial of service (DoS) attack detection. The WLA
Series access points provide simultaneous support for both access
service and spectrum analysis. This ensures early detection of
common RF interferers and also allows for appropriate corrective
actions to mitigate loss of performance due to interference.
ActiveScan allows the WLA Series access points to fulfill a dual
role, as the system scans all 802.11 channels while simultaneously
providing wireless connectivity to mobile clients. SentryScan
allows the WLA Series access points or individual access point
radios to act as dedicated sentries, providing continuous scanning.
With the highest security standards, WLA Series Wireless LAN
Access Points support all relevant encryption methods, including
Wi-Fi Protected Access 2 based on 802.11i (WPA2) and Wi-Fi
Protected Access (WPA) in both enterprise (802.1X) and personal
(pre-shared key) modes. There are no encryption keys, security
credentials, or data stored locally, which eliminates any security
risk if stolen or connected to an unauthorized network.
*The WLA371 is not Wi-Fi certified at this time.
2
When rogue or interference sources are detected, the WLA Series
access points coordinate with the WLC Series controllers for an
appropriate mitigation response to ensure the highest air quality for
efficient and high performing wireless access services. If an access
point goes out of service and leaves a coverage hole, the WLC Series
controllers can change channels or adjust power levels on multiple
nearby access points in a coordinated fashion in order to restore
Wi-Fi coverage and provide optimal reliability and performance.
Spectrum Intelligence
In addition to the typical RF scanning performed as a wireless
intrusion measure, which is supported on all WLA Series access
points, the WLA321, WLA322, WLA522, and WLA532 are also
equipped to gather spectrum intelligence either as a dedicated
spectrum sensor, or simultaneously together with client
access. This enables better troubleshooting and avoidance of
performance-degrading interference sources.
Working in conjunction with interference avoidance planning,
advanced diagnostics, visualization and reporting features in
RingMaster, the WLA522 and WLA532 can detect, classify and
report a wide variety of non Wi-Fi interference sources. These
include microwave ovens, spread-spectrum frequency hopping
wireless devices, movement sensors, continuous wave transmitters
(video cameras, wireless bridges) and many more that operate on
the same unlicensed spectrum that Wi-Fi relies on.
Wi-Fi phone
Easy Installation
The WLA Series indoor access points ship with a flexible mounting
kit designed for ceiling-mounted or wall-mounted deployment,
with common mounting brackets for easy upgrades to 11n. The
WLA Series is simple to deploy and can be configured and easily
managed remotely.
The aesthetically appealing enclosure of the WLA Series
indoor access points is designed to blend into typical office
environments, minimizing attention to its function. The enclosure
design resembles a smoke detector, making it less likely to be
tampered with, while featuring a built-in Kensington lock system
for added physical security.
Branch Office Deployment
WLA Series 11n access points support a “Remote AP” mode which
permits a low-cost controller-less deployment model in branch
locations. Without requiring any networking knowledge, anyone
can physically install the access point. The branch access point
initializes itself automatically by connecting back to a WLC
Series controller at the main campus over an existing VPN or
via encrypted tunnels through the Internet. Once initialized, the
Remote AP provides client services, and can maintain operation
with session persistence for an extended period in the event that
WAN links fail.
Tablet
WLA632
PDA
WLA632
WLA632
WLA632
5 GHz
Backhaul
Notebook
WLA632
Tablet
Figure 2: WLA Series wireless mesh services diagram
Figure 3: WLA Series wireless bridge services diagram
3
Outdoor Deployment
Optimized Traffic Flows
The WLA522 features external antenna ports, which allows for
outdoor rated antennas to be mounted on a building exterior while
the access point is mounted inside. The WLA632 outdoor access
point comes in a ruggedized, weatherproof enclosure suitable for
extreme outdoor environments and industrial-grade deployments.
The WLA632 complies with NEMA4X and IP67 standards for
corrosion resistance and features built-in lightning protection for
antenna ports, as well as surge protection for Ethernet and power
ports. The WLA632 also has automatic thermal management
inside the access point and includes received signal strength
indicator (RSSI) meter functions on LEDs for easy antenna
alignment in the field.
WLA Series Wireless LAN Access Points take advantage of
Juniper Networks highly distributed mobility architecture
known as Smart Mobile, by performing encryption, deep packet
inspection and forwarding locally at the access point. This not
only improves scalability by offloading WLAN controllers, it also
results in optimized traffic flows and radically reduced latency
for real-time applications. Along with a wealth of dynamic load
balancing techniques, this architecture ensures the scalability
and performance to support the most demanding wireless
applications, including video, voice over WLAN and real-time
location services.
Bridging and Mesh
The WLA Series also supports location-based services that rely on
Wi-Fi signal information for accurate three-dimensional positioning.
Common applications include asset tracking, IT support and
servicing, and network security based on client location.
In addition to traditional access point functionality, the WLA
Series may also be deployed as a wireless mesh to extend the
reach of enterprise WLANs beyond LAN cabling. Intelligent
switching is supported in all mesh modes, enabling each mesh
node to provide the shortest, least congested path to the
destination over encrypted secure mesh links.
The WLA Series access points also support point-to-point
bridging to provide seamless connectivity between buildings over
a wireless backhaul, to avoid the expense, inconvenience, and
delay of laying new cable.
Other Vendor Centralized WLAN Not Optimized for Voice
Controller A
Controller B
Subnet
A
Client A
Subnet
B
Client B
Voice traffic must pass through each
subnet’s WLAN controller
Real-Time Location Services
Unlike many wireless location systems that rely on tags or client
software on tracked devices, the WLA Series can detect the
position of any active Wi-Fi device including smartphones as well
as many medical devices.
Juniper Intelligent Switching Voice-optimized Traffic Flow
WLC Series A
Subnet
A
Client A
Subnet
B
Client B
Voice traffic takes the shortest path –
without having to pass through the controller
Figure 4: Local forwarding at the access point minimizes latency
4
WLC Series B
WLA371
WLA422
WLA321 /
WLA322
WLA522
WLA532
WLA632
Features
WLA371
WLA422
WLA321
WLA322
WLA522
WLA532
WLA632
Location
Indoor
Indoor
Indoor
Indoor
Indoor
Indoor
Outdoor
Radios
Single,
selectable
802.11 a/b/g
operation
Dual with
802.11a (5
GHz) and
802.11b/g
(2.4 GHz)
concurrent
operation
Single,
selectable
802.11a/n
(5 GHz) or
802.11b/g/n
(2.4 GHz)
operation
Dual with
802.11a/n
(5 GHz) and
802.11b/g/n
(2.4 GHz)
concurrent
operation
Dual with
802.11a/n
(5 GHz) and
802.11b/g/n
(2.4 GHz)
concurrent
operation
Dual with
802.11a/n (5
GHz) and
802.11b/g/n
(2.4GHz)
concurrent
operation
Dual with
802.11a/n
(5 GHz) and
802.11b/g/n
(2.4 GHz)
concurrent
operation
Internal omni-directional antennas
3
3
3
3
3
3
MIMO: (# radio transmit and # radio receive
chains)
2 x 2:2SS
2 x 2:2SS
2 x 2:2SS
3x3:3SS
3x3:2SS
Number of spatial streams
2
2
2
3
2
20 MHz and 40 MHz channels
3
3
3
3
3
PHY Data Rates per Radio
up to
300 Mbps
up to
300 Mbps
up to
300 Mbps
up to
450 Mbps
up to
300 Mbps
Packet aggregation (A-MPDU, A-MSDU)
3
3
3
3
3
Maximal Ratio Combining (MRC) for
increasing AP receiver performance
3
3
3
3
3
Cyclic Delay Diversity (CDD) for improved
downlink performance
3
3
3
3
3
802.11n Support
Low Density Parity Check improves error
correction efficiency for high throughput
performance
3
Space Time Blocking Code (STBC) for
improved reliability of data transfer
3
3
3
3
3
Security
Physical Security
Safe tamper-proof design with completely
sealed enclosure
3
3
3
3
3
3
3
No data, security credentials, or encryption
keys stored locally
3
3
3
3
3
3
3
No console port; no local access is possible
3
3
3
3
3
3
3
Stolen AP can be “blacklisted”
3
3
3
3
3
3
3
Integrated Kensington security lock feature
3
3
3
3
Security Screw and Proprietary Tool
3
3
WIDS/WIPS
ActiveScan: simultaneous scanning and client
services
3
3
3
3
3
3
3
SentryScan: dedicated scanning and
mitigation
3
3
3
3
3
3
3
3
3
3
3
3
3
Mesh/Bridging
Bridging and mesh support
5
Features (continued)
WLA371
WLA422
WLA321
WLA322
WLA522
WLA532
WLA632
Installation and Configuration
Mounting
One snap invisible ceiling grid attachment
3
3
3
3
3
3
Compatible indoor mounting brackets
3
3
adapter
required
adapter
required
3
adapter
required
Outdoor pole mount brackets and
swivel collar
3
Offset Wall Mounting
3
3
3
3
3
Powering
802.3af or 802.3at compliant PoE switch or
PoE injector
3
3
3
3
External PSU 48VDC with 8-pin (male) DIN
connector
3
RF Management
Outage resiliency planning for RF auto-tuning
using Juniper Networks RingMaster
3
3
Spectrum analysis and classification of
interferers
3
3
3
3
3
3
3
3
3
Specifications
WLA371
WLA422
WLA321
WLA322
WLA522
WLA532
WLA632
6.6 in (Diameter)
x 1.85 in (H)
6.75 in
(Diameter)
x 2.09 in (H)
5.6 in (H) x
5.4 in (W) x
1.9 in (D)
5.6 in (H) x
5.4 in (W) x
1.9 in (D)
7.1 in (Diameter)
x 2.4 in (H)
5.71 in (H) x 5.37
in (W) x 2.11 in
(D)
11.18 in (H) x 11.18
in (W) x 5.53
in (D)
(16.76 cm
(Diameter) x
4.69 cm (H))
(17.15 cm
(Diameter) x
5.30 cm (H))
(14.3 cm (H) x
13.7 cm (W) x
4.8 cm (D))
(14.3 cm (H) x
13.7 cm (W) x
4.8 cm (D))
(18 cm
(Diameter) x 6.1
cm (H))
(14.5 cm (H) x
13.65 cm (W) x
5.35 cm (D))
(28.4 cm (H) x
28.4 cm (W) x
14.05 cm (D))
Weight
12.5 oz
(354 g)
12.9 oz
(366 g)
6.92 oz
(196 g)
7.24 oz
(205 g)
1.25 lb
(569 g)
13.87 oz
(393.2 g)
9.8 lb
(4.44 kg)
LAN interfaces
Two 10/100
BASE-T autosensing (RJ45)
PoE ports
Two 10/100
BASE-T autosensing (RJ45)
PoE ports
One
10/100/1000
BASE-TX autosensing (RJ45)
PoE port
One
10/100/1000
BASE-TX
auto-sensing
(RJ45) PoE
port
One
10/100/1000
BASE-TX autosensing (RJ45)
PoE port
One
10/100/1000
BASE-TX autosensing (RJ45)
PoE port
One
10/100/1000
Ethernet port
for unshielded
twisted pair
connectivity on
ruggedized 8 pin
DIN connector
Operating temperature
32° to 122° F
(0° to 50° C)
32° to 104° F
(0° to 40° C)
32° to 122° F
(0° to 50° C)
32° to 122° F
(0° to 50° C)
32° to 122° F
(0° to 50° C)
32° to 122° F
(0° to 50° C)
-40° to 131° F
(-40° to 55° C)
Storage temperature
-4° to 158° F
(-20° to
70° C)
-13° to 158° F
(-25° to
70° C)
-40° to 158° F
(-40° to
70° C)
-40° to 158° F
(-40° to
70° C)
-40° to 158° F
(-40° to
70° C)
-40° to 158° F
(-40° to
70° C)
-40° to 158° F
(-40° to
70° C)
Humidity
10% to 95%
(noncondensing)
10% to 95%
(noncondensing)
10% to 95%
(noncondensing)
10% to 95%
(noncondensing)
10% to 95%
(noncondensing)
5% to 95%
(noncondensing)
10% to 95%
(noncondensing)
Hardware Specifications
Dimensions
Environmental
Status indicator LEDs
3 dual color
3 dual color
3 dual color
3 dual color
3 dual color
3 dual color
3 dual color
Power consumption at
full operation
8.2 W
9.3 W
5.0 W
7.0 W
11.3 W
10 W (3x3)
30 W
802.11a and 802.11a/n Radio Specifications
5.15 GHz to 5.85 GHz
operating frequency
3
3
3
3
3
3
3
Orthogonal Frequency
Division Multiplexing
(OFDM)
3
3
3
3
3
3
3
6
Specifications (continued)
WLA371
WLA422
WLA321
WLA322
WLA522
WLA532
WLA632
23 dBm
23 dBm
21 dBm with
2 antennas
21 dBm with
2 antennas
21 dBm with
2 antennas
23dBm with
3 antennas
19 dBm with
3 antennas
MCS 0 to MCS
15 (6.5 Mbps to
300Mbps)
MCS 0 to MCS
15 (6.5 Mbps to
300Mbps)
MCS 0 to MCS 15
(6.5 Mbps to 300
Mbps)
MCS 0 to MCS 23
(6.5 Mbps to 450
Mbps)
MCS 0 to MCS 15
(6.5 Mbps to 300
Mbps)
3
3
3
3
3
Transmit Power
Max power (Actual
output power may be
limited by regulatory
domain requirements)
Configurable Association Rates
802.11n Modulation
Coding Scheme
802.11a Legacy Rates:
54 Mbps, 48 Mbps, 36
Mbps, 24 Mbps, 18 Mbps,
12 Mbps, 9 Mbps and 6
Mbps with automatic
rate fallback
3
3
802.11g and 802.11g/n Radio Specifications
2.4 GHz to 2.484 GHz
operating frequency
3
3
3
3
3
3
3
Orthogonal Frequency
Division Multiplexing
(OFDM)
3
3
3
3
3
3
3
23 dBm
23 dBm
21 dBm with
2 antennas
21 dBm with
2 antennas
21 dBm with
2 antennas
23 dBm with
3 antennas
20 dBm with
3 antennas
MCS 0 to MCS 15
(6.5 Mbps to 130
Mbps)
MCS 0 to MCS 15
(6.5 Mbps to 130
Mbps)
MCS 0 to MCS 15
(6.5 Mbps to 130
Mbps)
MCS 0 to MCS 23
(6.5 Mbps to 195
Mbps)
MCS 0 to MCS 15
(6.5 Mbps to 130
Mbps)
3
3
3
3
3
Transmit Power
Max power (Actual
output power may be
limited by regulatory
domain requirements)
Configurable Association Rates
802.11n Modulation
Coding Scheme
802.11g Legacy Rates:
54 Mbps, 48 Mbps, 36
Mbps, 24 Mbps, 18 Mbps,
12 Mbps, 9 Mbps and 6
Mbps with automatic
rate fallback
3
802.11b Radio Specifications
2.4 GHz to 2.484 GHz
operating frequency
3
3
3
3
3
3
3
Direct-SequenceSpread-Spectrum
(DSSS)
3
3
3
3
3
3
3
23 dBm
23 dBm
18 dBm
18 dBm
18 dBm
18 dBm
17 dBm
3
3
3
3
3
3
3
3
3
3
3
3
Transmit Power
Max Transmit P power
(Actual output power
may be limited by
regulatory domain
requirements)
Configurable Association Rates
11 Mbps, 5.5 Mbps, 2
Mbps, and 1 Mbps with
automatic fallback
3
Radio Approvals
Channel Availability
Based on configured
regulatory domain
3
Radio Approvals
USA: FCC
3
3
3
3
3
3
3
Canada: IC
3
3
3
3
3
3
3
EU: CEN-CENELEC
3
3
3
3
3
3
3
Japan: MIC
3
3
3
3
3
3
3
Others: ask
representative
3
3
3
3
3
3
3
7
Specifications (continued)
WLA371
WLA422
WLA321
WLA322
WLA522
WLA532
WLA632
Standards Support
IEEE
802.3i: 10BASE-T
Ethernet
3
3
3
3
3
3
3
802.3u: 100BASE-TX
Ethernet
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
802.3at: Power over
Ethernet
3
3
3
802.3az Energy Efficient
Ethernet
3
3
802.3ab: 1000BASE-TX
Gigabit Ethernet
802.3af: Power over
Ethernet
3
3
3
802.11i
3
3
3
3
3
3
3
802.1X Network Access
Control and Mutual
Authentication
3
3
3
3
3
3
3
802.11a, 802.11b, 802.11g
Wireless Ethernet
3
3
3
3
3
3
3
3
3
3
3
3
802.11e quality of
service (QoS)(WMM),
call admission control
(TSPEC), unscheduled
power save delivery
(U-APSD)
3
3
3
3
3
3
3
Fast Roaming (PMK
Caching), encryption
(AES/CCMP and TKIP)
3
3
3
3
3
3
3
Wi-Fi Alliance Protected
Access 1.0 (WPA) and
2.0 (WPA2)
3
3
3
3
3
3
Wi-Fi Multimedia
(WMM) & Wi-Fi
Multimedia Power Save
(WMM-PS)
3
3
3
3
3
3
Wi-Fi Certified for
802.11a/b/g
3
3
3
3
3
3
3
3
3
3
3
3
802.11n
Wi-Fi Alliance
Wi-Fi Certified for
802.11a/b/g/n
IETF
IETF CAPWAP
WG Taxonomy
and Architecture
compatibility
3
Regulatory Compliance
Safety
USA/CAN CSA C22-2
60950-1
3
3
3
3
3
3
3
CB Scheme IEC 60950-1
3
3
3
3
3
3
3
3
3
3
3
3
3
3
IEC 60950-22
3
EU Low Voltage Directive
2006/95/EC
3
3
UL-2043 Plenum Rated
3
3
EU EMC Directive
2004/108/EC
R&TTE EU Directive
1999/5/EC
3
* The Plenum rating applies to the WLA522E model.
8
3
3
3
3
3
3
3
3
3*
3
Specifications (continued)
WLA371
WLA422
WLA321
WLA322
WLA522
WLA532
WLA632
Environmental
WEEE
3
3
3
3
3
3
3
RoHS
3
3
3
3
3
3
3
EN60601-1-2: EMC
Medical Standard
3
3
3
3
3
3
3
Ingress Protection: IP 67
3
Other
FCC Part 15, Class B
3
3
3
3
3
3
ICES-003, Class B
3
3
3
3
3
3
EN 301 893
3
3
3
3
3
3
3
Juniper Networks Services and Support
Juniper Networks is the leader in performance-enabling services that are designed to accelerate, extend, and optimize your highperformance network. Our services allow you to maximize operational efficiency while reducing costs and minimizing risk, achieving a
faster time to value for your network. Juniper Networks ensures operational excellence by optimizing the network to maintain required
levels of performance, reliability, and availability. For more details, please visit juniper.net/us/en/products-services/.
Ordering Information
Model Number
Description
Model Number
Description
WLA321 Hardware
WLA422 External Antennas
WLA321-US
WLA-ANT1060R
60° indoor/outdoor 802.11b/g sector antenna
with 10 dB gain. Includes 36" M/M-RP SMA
cable and mounting kit.
WLA-ANT1120R
120° indoor/outdoor 802.11b/g sector antenna
with 7 dB gain. Includes 36" M/M-RP SMA cable
and mounting kit.
WLA-ANT1180R
180° indoor/outdoor 802.11b/g sector antenna
with 6 dB gain. Includes 36" M/M-RP SMA cable
and mounting kit.
WLA-ANT5060R
60° indoor/outdoor 802.11a sector antenna with
14 dB gain. Includes 36" M/M-RP SMA cable
and mounting kit.
WLA-ANT5120R
120° indoor/outdoor 802.11a sector antenna
with 12 dB gain. Includes 36" M/M-RP SMA
cable and mounting kit.
WLA-ANT5180R
180° indoor/outdoor 802.11a sector antenna
and 10 dB gain. Includes 36" M/M-RP SMA
cable and mounting kit.
WLA-ANT7360R
360° indoor dual-band omni-directional
antenna and 6 dB (8 dB) gain in the 2.4 GHz (5
GHz) band. Includes 36" M/M-RP SMA cable
and mounting kit.
WLA-ANT7360R-OUT
360° outdoor dual-band omni-directional
antenna with 6 dB (8 dB) gain in the 2.4 GHz (5
GHz) band; includes mast mounting kit and 36"
M/M Type N to RP-SMA cable.
WLA321-WW
AP with single radio 802.11a/b/g/n 2x2 MIMO
(2SS), single 1000BASE-T 802.3af PoE
Ethernet port, 4 internal antennas. Not rated for
plenum use. Ceiling mount bracket included. For
Operation in USA.
AP with single radio 802.11a/b/g/n 2x2 MIMO
(2SS), single 1000BASE-T 802.3af PoE
Ethernet port, 4 internal antennas. Not rated for
plenum use. Ceiling mount bracket included. For
worldwide operation except US and Israel.
WLA322 Hardware
WLA322-US
WLA322-WW
AP with dual radios 802.11a/b/g/n 2x2 MIMO
(2SS), single 1000BASE-T 802.3af PoE
Ethernet port, 4 internal antennas. Not rated for
plenum use. Ceiling mount bracket included. For
operation in USA.
AP with dual radios 802.11a/b/g/n 2x2 MIMO
(2SS), single 1000BASE-T 802.3af PoE
Ethernet port, 4 internal antennas. Not rated for
plenum use. Ceiling mount bracket included. For
worldwide operation except US and Israel.
WLA371 Hardware
WLA371B
AP with single 802.11a/b/g radio, dual 10/100
802.3af PoE ports and internal dual-band
diversity antennas.
WLA422 Hardware
WLA422B
AP with dual 802.11a and 802.11b/g radios, dual
10/100 802.3af PoE ports, internal dual-band
diversity antennas, external female RP SMA jacks
for .11a and .11b/g antennas (purchased separately).
9
Ordering Information (continued)
Model Number
Description
Model Number
Description
WLA522 Hardware
WLA532 Hardware
WLA522-US
AP with dual radios 802.11a/b/g/n 2x2 MIMO
(2SS), single 1000BASE-T 802.3af PoE
Ethernet port, 4 internal antennas. Not rated
for plenum use. Ceiling/wall mount bracket
included. Required for operation in USA.
WLA532-US
AP with dual radios 802.11a/b/g/n 3x3 MIMO
(3SS), single 1000BASE-T 802.3af PoE
Ethernet port, 6 internal antennas. Not rated for
plenum use. Ceiling mount bracket included. For
operation only in USA.
WLA522-WW
AP with dual radios 802.11a/b/g/n 2x2 MIMO
(2SS), single 1000BASE-T 802.3af PoE
Ethernet port, 4 internal antennas. Not rated
for plenum use. Ceiling/wall mount bracket
included. Worldwide operation except US and
Israel.
WLA532-WW
AP with dual radios 802.11a/b/g/n 3x3 MIMO
(3SS), single 1000BASE-T 802.3af PoE
Ethernet port, 6 internal antennas. Not rated for
plenum use. Ceiling mount bracket included. For
worldwide operation except US and Israel.
WLA522-IL
AP with dual radios 802.11a/b/g/n 2x2 MIMO
(2SS), single 1000BASE-T 802.3af PoE
Ethernet port, 4 internal antennas. Not rated
for plenum use. Ceiling/wall mount bracket
included. Required for operation in Israel.
WLA532-IL
AP with dual radios 802.11a/b/g/n 3x3 MIMO
(3SS), single 1000BASE-T 802.3af PoE
Ethernet port, 6 internal antennas. Not rated
for plenum use. Ceiling mount bracket included.
Required for operation in Israel.
WLA522E-US
Plenum-rated AP with dual radios 802.11a/b/
g/n 2x2 MIMO, single 1000BASE-T 802.3af PoE
Ethernet port, 4 external antenna ports. Ceiling
mount bracket included. Required for operation
in USA.
WLA522E-WW
WLA522E-IL
WLA632 Hardware
WLA632-US
Plenum-rated AP with dual radios 802.11a/b/
g/n 2x2 MIMO, single 1000BASE-T 802.3af PoE
Ethernet port, 4 external antenna ports. Ceiling
mount bracket included. Worldwide operation
except US and Israel.
Outdoor AP, dual radios 802.11a/b/g/n 3x3
MIMO (2SS), single 1000BASE-T PoE Ethernet
port, external female Type N connectors.
Outdoor power supply included. Required for
operation in USA.
WLA632-WW
Plenum-rated AP with dual radios 802.11a/b/
g/n 2x2 MIMO, single 1000BASE-T 802.3af PoE
Ethernet port, 4 external antenna ports. Ceiling
mount bracket included. Required for operation
in Israel.
Outdoor AP, dual radios 802.11a/b/g/n 3x3
MIMO (2SS), single 1000BASE-T PoE Ethernet
port, external female Type N connectors.
Outdoor power supply included. Worldwide
operation except US and Israel.
WLA632-IL
Outdoor AP, dual radios 802.11a/b/g/n 3x3
MIMO (2SS), single 1000BASE-T PoE Ethernet
port, external female Type N connectors.
Outdoor power supply included. 5 GHz
operation not supported per regulation.
Required for operation in Israel.
Spectrum Analysis Feature License
WLC-SPECTRUM-U1
Spectrum Analysis Module License for 1 AP.
Requires software version 7.5 or later.
WLC-SPECTRUM-U4
Spectrum Analysis Module License for 4 APs.
Requires software version 7.5 or later.
WLA-XPS6201-OUT
WLC-SPECTRUM-U16
Spectrum Analysis Module License for 16 APs.
Requires software version 7.5 or later.
WLA632 External Antennas
WLC-SPECTRUM-U32
Spectrum Analysis Module License for 32 APs.
Requires software version 7.5 or later.
WLA-ANT5007-OUT
Outdoor two-element cross-polarized high-gain
directional panel antenna for 11n 5 GHz band.
WLA-ANT7360A-OUT
360° outdoor dual-band omni-directional
antenna for 11n. 6 dB (8 dB) gain in the 2.4 GHz
(5 GHz) band; includes mast mounting kit and
one 36” Type N male to Type N male low-loss
cable.
External Antennas (WLA522E Only)
WLA632 Power Accessories
External power supply for the WLA632. 100-240
VAC 50-60Hz. Includes AC input cable.
WLA-ANT5007-OUT
Outdoor two-element cross-polarized high-gain
directional panel antenna for 11n 5 GHz band.
WLA-ANT7360A-OUT
360° outdoor dual-band omni-directional
antenna with 6 dB (8 dB) gain in the 2.4 GHz (5
GHz) band; includes mast mounting kit and 36”
Type N male to Type N male low-loss cable.
WLA-ANT74520-OUT
Indoor/outdoor dual-band three-element
directional panel antenna for 11n. 10.9 dB (13.5
dB) gain in the 2.4 GHz (5 GHz) band and 45
degree (20 degree) horizontal beamwidth in the
2.4 GHz (5 GHz) band.
Indoor/outdoor dual-band three-element
directional panel antenna for 11n. 10.9 dB (13.5
dB) gain in the 2.4 GHz (5 GHz) band and 45
degree (20 degree) horizontal beamwidth in the
2.4 GHz (5 GHz) band.
WLA-ANT77555-OUT
Indoor/outdoor dual-band three-element
directional panel antenna for 11n, 8 dB (10.7 dB)
gain in the 2.4 GHz (5 GHz) band and 75 degree
(55 degree) horizontal beamwidth in the 2.4
GHz (5 GHz) band.
WLA-ANTCBL3MMOUT
3m M/M ULA400 cable with Type N connectors
for extension of outdoor antennas.
WLA-ANTPROT-OUT
N-male to N-female lightning protector for
direct mount.
WLA-ANTLGTNGOUT
Lightning arrestor kit for outdoor antenna
installations. Includes F/F Type N Bulkhead
with 0-6 GHz range, 3m M/M Type N ULA400
low loss cable, and grounding attachment.
WLA-ANT74520-OUT
WLA-ANT77555-OUT
WLA-ANTXTENDOUT
10
Indoor/outdoor dual-band three-element
directional panel antenna for 11n, 8 dB (10.7 dB)
gain in the 2.4 GHz (5 GHz) band and 75 degree
(55 degree) horizontal beamwidth in the 2.4
GHz (5 Hz) band.
12" Belden 7806A cable (LMR-195) with
N-female and RP-SMA plug connectors for
extending WLA522E coaxial interface for use
with external antennas.
Ordering Information (continued)
Model Number
Description
Mounting Brackets
WLA-BRKT-ATST
Anti-tamper security screws and appropriate
proprietary tool. Package includes 100 screws
and 1 tool. For use with WLA532-US, WLA532WW, WLA532-IL, WLA322-US, WLA322-WW,
WLA321-US, and WLA321-WW.
WLA-BRKT-CLNG
Spare recessed ceiling tile rail adapter. Support
for ceiling rail types (15/16 inch and 9/16 inch).
Tool-less mounting. Optionally accepts –ATST
security screws. Package includes 8 units. For
use with WLA532-US, WLA532-WW, WLA532IL, WLA322-US, WLA322-WW, WLA321-US, and
WLA321-WW.
WLA-BRKT-WALL
Wall-mount adapter extends AP 1.5 inches
from wall for Ethernet cable bend radius.
Optionally accepts –ATST security screws.
Package includes 8 units. For use with WLA532US, WLA532-WW, WLA532-IL, WLA322-US,
WLA322-WW, WLA321-US, and WLA321-WW.
WLA-GNGWLBXADP-EU
Europe single gang wall box adapter (minimum
extension from wall, covers wall box and cables,
Torx or other semi-secure fastener option).
Optionally accepts –ATST security screws.
Package includes 8 units. For use with WLA532US, WLA532-WW, WLA532-IL, WLA322-US,
WLA322-WW, WLA321-US, and WLA321-WW.
WLA-GNGWLBXADP-NA
North America single gang wall box adapter
(minimum extension from wall, covers wall box
and cables, Torx or other semi-secure fastener
option). Optionally accepts –ATST security
screws. Package includes 8 units. For use
with WLA532-US, WLA532-WW, WLA532-IL,
WLA322-US, WLA322-WW, WLA321-US, and
WLA321-WW.
About Juniper Networks
Juniper Networks is in the business of network innovation. From
devices to data centers, from consumers to cloud providers,
Juniper Networks delivers the software, silicon and systems that
transform the experience and economics of networking. The
company serves customers and partners worldwide. Additional
information can be found at juniper.net.
Access Point Mesh/Bridging Licenses
WLC-MESH-U4
Mesh Module license for 4 APs. Requires
software version 7.1 or later.
WLC-MESH-U12
Mesh Module license for 12 APs. Requires
software version 7.1 or later.
WLC-MESH-U32
Mesh Module license for 32 APs. Requires
software version 7.1 or later.
11
Corporate and Sales Headquarters
APAC Headquarters
EMEA Headquarters
Juniper Networks, Inc.
Juniper Networks (Hong Kong)
Juniper Networks Ireland
1194 North Mathilda Avenue
26/F, Cityplaza One
Airside Business Park
Sunnyvale, CA 94089 USA
1111 King’s Road
Swords, County Dublin, Ireland
Phone: 888.JUNIPER (888.586.4737)
Taikoo Shing, Hong Kong
Phone: 35.31.8903.600
or 408.745.2000
Phone: 852.2332.3636
EMEA Sales: 00800.4586.4737
Fax: 408.745.2100
Fax: 852.2574.7803
Fax: 35.31.8903.601
juniper.net
Copyright 2012 Juniper Networks, Inc. All rights reserved. Juniper Networks, the Juniper Networks logo, Junos,
NetScreen, and ScreenOS are registered trademarks of Juniper Networks, Inc. in the United States and other
countries. All other trademarks, service marks, registered marks, or registered service marks are the property of
their respective owners. Juniper Networks assumes no responsibility for any inaccuracies in this document. Juniper
Networks reserves the right to change, modify, transfer, or otherwise revise this publication without notice.
1000359-008-EN
12
June 2012
Printed on recycled paper
To purchase Juniper Networks solutions,
please contact your Juniper Networks
representative at 1-866-298-6428 or
authorized reseller.
Download PDF
Similar pages