HP ProLiant BL620c Generation 7 Server Blade

QuickSpecs
HP ProLiant BL620c Generation 7 Server Blade
Overview
1.
2.
3.
4.
5.
6.
HP ProLiant BL620c Generation 7 (G7) Server Blade
Two hot-plug small form factor (SFF) SAS/SATA/SSD
7. Four NC553i 10Gb FlexFabric adapter ports
bays
Power on/standby button
8. iLO 3 Management adapter port
UID, health, and network adapter LEDs
9. HP P410i Smart Array flash cache connector
32 RDIMM slots supporting up to 1.0TB of DDR3-1333
10. One or two Intel® Xeon® 6500 or 7500 Series processors
memory (operating up to 1066 MHz)
up to eight-cores each (below the hard drives)
One USB 2.0 port, one MicroSD high capacity (SDHC)
11. Server release lever
port, and one TPM 1.2 connector
Three PCIe Gen2 I/O expansion mezzanine slots
What's New
Support for 6G SAS Hot Plug Enterprise Performance Solid State Drives to 800GB per server (2x 400GB)
Support for 6G SAS Hot Plug Enterprise Mainstream Solid State Drives to 1.6TB per server (2x 800GB)
At A Glance
This document covers the HP ProLiant BL620c G7 server blade only. For more information on the HP BladeSystem c-Class
Enclosure and HP BladeSystem c-Class Interconnects, please see the following:
HP BladeSystem c3000 Enclosure QuickSpecs:
http://h18000.www1.hp.com/products/quickspecs/12790_div/12790_div.html
HP BladeSystem c7000 Enclosure QuickSpecs:
http://h18000.www1.hp.com/products/quickspecs/12810_div/12810_div.html
HP BladeSystem c-Class Interconnect and Mezzanine Components QuickSpecs:
http://h18004.www1.hp.com/products/blades/components/c-class-interconnects.html
http://h18004.www1.hp.com/products/blades/components/c-class-adapters.html
DA - 13747 Worldwide QuickSpecs — Version 14 — 6.20.2011
Page 1
QuickSpecs
HP ProLiant BL620c Generation 7 Server Blade
Overview
The HP ProLiant BL620c G7 Server Blade offers unmatched scalability, performance, and economics in a two-processor
Intel® Xeon® server blade. Two models are now available, one optimized for the Intel® Xeon® E7-2800 series and the other
optimized for the Intel® Xeon® 6500/7500 series. Fully utilizing the design architecture of the Intel® Xeon® 7500 chipset, up
to two top performing 130W processors are supported along with 32 RDIMM slots providing 1.0TB (BL620c G7 Intel Xeon E72800 models) and 512MB (BL620c G7 Intel Xeon 6500/7500 models) of memory for ultimate virtualization efficiency. The four
included 10Gb FlexFabric converged network adapter ports with built-in autosensing 1Gb/10Gb Ethernet, FCoE, Flex-10,
hardware-based accelerated iSCSI, iSCSI boot, and TCP/IP offload engine combined with the three PCIe Gen2 mezzanine
expansion slots yield an outstanding 96Gb of total I/O bandwidth.
The BL620c G7 is also perfect for 2P applications requiring performance and features greater than typical dual processor
(DP) Intel® Xeon® 5000 offerings. The scalability of the BL620c G7 offers up to 1000% the memory capacity and increased
memory performance along with an extensive list of memory RAS features, 2,000% the embedded Ethernet bandwidth, 440%
the virtual machines (VMs), 300% the on-board I/O expansion slots, and 440% the total I/O bandwidth than other 2P Intel®
Xeon® servers available today.
Traditional multi-processor (MP) class server blades are typically unbalanced providing processor performance and density at
the expense of proportional memory capacity and I/O bandwidth. As such, these unbalanced servers fail when faced with
larger databases and higher-density virtualization applications. Today, you have a better alternative. By designing a balanced
architecture, the BL620c G7 is a very progressive 2P MP blade offering that ensures that all subsystems can be used
effectively under a broad range of enterprise applications and workloads. The 2P BL620c G7 along with the 4P BL680c G7
together provide a complete Intel® Xeon® portfolio creating a new class of scale-up HP ProLiant server blades delivering the
reliability and performance you need to handle demanding workloads with confidence.
Processor:
One or two Intel® Xeon® E7-2800 Series processors each up to 10 cores and 130 watts (BL620c G7 Intel Xeon
E7-2800 models)
NOTE: All processors within the server must be identical.
One or two Intel® Xeon® 6500 or 7500 Series processors each up to 8 cores and 130 watts (BL620c G7 Intel
Xeon 6500/7500 models)
NOTE: All processors within the server must be identical.
Extensive list of over 35 system-wide reliability, serviceability, and availability (RAS) features: now including
Double Device Data Correction (DDDC) Ready capability (BL620c G7 Intel Xeon E7-2800 models)
NOTE: "Ready" is defined as the hardware is capable of supporting the feature with only a future planned
software upgrade required to enable.
Intel® Advanced Encryption Standard New Instructions (Intel® AES-NI) delivering robust encryption without the
need for additional appliances or increased performance overhead for improved encryption performance and
efficiency (BL620c G7 Intel Xeon E7-2800 models)
Intel® Trusted Execution Technology (TXT) Ready for a more secure system by helping to detect and prevent
malicious software attacks (BL620c G7 Intel Xeon E7-2800 models)
NOTE: "Ready" is defined as the hardware is capable of supporting the feature with only a future planned
software upgrade required to enable.
Intel® 7500 chipset with two integrated memory controllers per processor for maximum system performance
Intel 7510 Scalable Memory Buffer providing up to 1.8W (maximum) and 4.4W (idle) power savings per each SMI
(BL620c G7 Intel Xeon E7-2800 models)
Intel Intelligent Power Technology including (BL620c G7 Intel Xeon E7-2800 models):
Lower partial active power that automatically pleases processor, memory, and I/O controller into the lowest
available power states to meet the current workload while minimizing performance impact
Lower idle power that allows idling cores to be reduced to near-zero power independent of other cores,
reducing server idle power consumption
Meshed network of four Intel® QuickPath Interconnects (Intel® QPI) each up to 6.4GT/s (25.6GB/s data
bandwidth) for point-to-point high speed links increasing bandwidth and lowering latency
Intel® Hyper-threading resulting in higher processing throughput and improved multi-threaded application
performance
Intel® Turbo Boost Technology that can automatically operate the processor(s) at a faster frequency than the
base operating frequency under certain circumstances.
Up to 30MB of L3 cache per processors increasing efficiency of cache-to-cache data transfers maximizing
memory bandwidth while reducing latency through storing greater amount of data thus reducing data transfers to
memory.
Intel® Virtualization Technology that assist virtualization software in generating more efficient virtualization
solutions.
DA - 13747 Worldwide QuickSpecs — Version 14 — 6.20.2011
Page 2
QuickSpecs
HP ProLiant BL620c Generation 7 Server Blade
Overview
PCI Gen2 increasing bandwidth up to 4 GB/s on each x8 PCI Express Gen2 connection.
Memory:
1.0TB memory capacity via thirty-two (32) DDR3 registered DIMMs (RDIMM) slots operating up to 1066MHz
(BL620c G7 Intel Xeon E7-2800 models)
NOTE: The DDR3 memory speed is a function of the processor Intel® QPI speed. See the "Memory" section
below for details.
512MB memory capacity via thirty-two (32) DDR3 registered DIMMs (RDIMM) slots operating up to 1066MHz
(BL620c G7 Intel Xeon 6500/7500 models)
NOTE: DDR3 memory speed is a function of the processor Intel® QPI speed. See the "Memory" section below for
details.
8GB, 16GB and 32GB 1.35V DDR3L RDIMM low power memory options providing up to a 0.15V power savings
per each DIMM compared to standard 1.5V DDR3 RDIMMs (BL620c G7 Intel Xeon E7-2800 models)
For maximum memory bandwidth, performance, and capacity, two integrated memory controllers per each
processor that connect to a total of four Intel® Scalable Memory Buffers (SMB)
Memory RAS features including:
Data bus ECC protection and advanced ECC / SDDC
Demand scrubbing
DIMM address/control bus parity protection
Memory mirroring and memory failover
Rank sparring (online spare)
Intel® SMI lane and clock failover
Intel® SMI packet retry
Failed DIMM isolation
Storage Controller:
Integrated SAS version 2.0 (6Gb) HP Smart Array P410i Controller with RAID 0 and 1.
NOTE: The P410i is configured with no cache allowing the end user to select the desired cache option (if cache is
desired in the first place).
NOTE: RAID 0 and 1 are supported on the P410i without the need for a cache option.
P410i 512MB and 1GB flash backed write cache (FBWC) and Smart Array Advanced Pack (SAAP) options.
Optional Smart Array RAID mezzanine controllers (with BBWC and FBWC) for connection to external storage.
Two (2) slots for BBWC and/or FBWC battery options.
NOTE: The server supports up to a combined total of two (2) battery cache options for the P410i and/or optional
Smart Array RAID controllers.
Optional IO Accelerator cards for high performance I/O.
Optional P700m Smart Array Controller for direct attach and shared SAS storage external to the c-Class
enclosures
Optional HP D2200sb PCIe Storage Blade for direct attached and shared storage within the c-Class enclosures
Internal Drive Support:
Two (2) hot-plug small form factor (SFF) drive bays
Support for SAS, SATA, and SSD hot-plug hard drives
Network Controller:
Four (4) embedded HP NC553i 10Gb FlexFabric adapter ports supporting autosensing 10Gb/1Gb Ethernet,
FCoE, Flex-10, TCP/IP offload engine, hardware-based accelerated iSCSI, and iSCSI boot.
NOTE: Fibre Channel over Ethernet (FCoE) capability requires the use of an HP Virtual Connect FlexFabric
10Gb/24-port Module or HP 10GbE Pass-Thru Module.
The embedded adapter ports are routed interconnect bays 1 and 2 (c7000) and interconnect bay 1 (c3000)
One (1) 10/100 network adapter port dedicated to iLO 3 Management
Mezzanine Support:
Three (3) mezzanine expansion slots as follows:
Two (2) Type II (25 watts) x8 PCIe Gen2; mezzanine slots 2 and 3 supporting QDR IB, 4Gb and 8Gb FC,
10Gb FlexFabric, 10Gb Flex10, 10GbE, 1GbE, I/O accelerator cards, the Smart Array RAID controllers, and
the PCI Pass-thru Expansion card.
Mezzanine slot's 2 ports are routed to interconnect bays 5,6,7,8 (c7000) and 3,4,3,4 (c3000)
Mezzanine slot's 3 ports are routed to interconnect bays 7,8,5,6 (c7000) and 3,4,3,4 (c3000)
One (1) Type I (15 watts) x4 PCIe Gen2; mezzanine slot 1 supporting 4Gb and 8Gb FC, 10Gb FlexFabric,
10Gb Flex10, 10GbE, 1GbE, and the I/O accelerator cards
Mezzanine slot's 1 ports are routed to interconnect bays 3,4,3,4 (c7000) and 2,2,2,2 (c3000)
NOTE: HP recommends 10Gb adapters be installed in a x8 PCIe slot for optimal performance.
NOTE: Type II slots accept both Type I or Type II cards. Type I slots accepted Type I cards only.
Expansion Blade Support:
DA - 13747 Worldwide QuickSpecs — Version 14 — 6.20.2011
Page 3
QuickSpecs
HP ProLiant BL620c Generation 7 Server Blade
Overview
Up to two HP BladeSystem Expansion Blades (Ultrium Tape Blades, PCI Expansion Blade, and Storage
Expansion Blade) are supported using the HP PCI Expansion Pass-thru mezzanine Card. One HP PCI Express
Mezzanine Pass-Thru Card is required per Expansion Blade.
NOTE: The PCI Express Mezzanine Pass-Thru Card(s) must be installed in mezzanine slots 2 and/or 3.
NOTE: In a c3000 rack enclosure where the blades are installed horizontally, up to two expansion blades may
installed in the two slots created by the mini divider in the top half of the enclosure with a BL620c G7 installed in
the lower half of the enclosure.
NOTE: In a c3000 tower and c7000 rack enclosure where the blades are installed vertically, two expansion blades
may installed in the blade slots adjacent to the BL620c G7 by staking one on top of another via a blade coupler
that is included with the PCI Express Mezzanine Pass-Thru Card and the expansion blades. If a single expansion
blade is installed, it must be installed in the lower slot adjacent to the BL620c G7; a half-height server may be
installed above the expansion blade.
Internal USB and SD Support:
One (1) internal USB 2.0 connector for USB flash media drive keys
One (1) internal micro secure digital high capacity (SDHC) card slot
Trusted Platform Module (TPM):
One (1) internal TPM 1.2 module connector
Infrastructure Management:
This server blade requires the latest version of the Onboard Administrator firmware. This firmware release may
also require other subsystem firmware upgrades. For information on the latest firmware versions, please see the
Blades Firmware Maintenance website at: http://h18004.www1.hp.com/products/blades/components/c-classcompmatrix.html
HP Integrated Lights-Out 3 (iLO 3) management processor for simplified server setup, health monitoring and
recovery, power and thermal control, and lights-out remote administration.
HP Insight Control, a product option, delivers essential infrastructure management that can help save time and
money by making it easy to deploy, monitor, control and optimize your IT infrastructure through a single, simple
management console. Insight Control supports both Windows and Linux-based central management servers.
HP Insight Dynamics for ProLiant, a product option, is an integrated command center that enables IT Staff
personnel to continuously analyze and optimize a converged infrastructure, while automating and reducing the
cost of common data center tasks by as much as 40 percent. This ultimately enables them to dynamically keep
pace with the organization's changing business requirements.
Operating System Support:
Microsoft Windows, RHEL, SLES, Oracle Solaris, VMware, and Citrix XenServer
Form Factor:
Full height, single wide server blade that plugs into the HP BladeSystem c3000 and c7000 enclosures
Enclosures:
HP offers two different c-Class server blade enclosures to meet your individual needs:
The HP BladeSystem c7000 rack enclosure is 10U high and holds up to 8 HP ProLiant BL620c G7 servers
plugged vertically.
The HP BladeSystem c3000 rack enclosure is 6U high and holds up to 4 HP ProLiant BL620c G7 servers
plugged horizontally.
Server blades, storage blades, and interconnect modules are all designed to fit into the c7000 and c3000
enclosures.
For additional enclosure information, please see:
http://h18004.www1.hp.com/products/blades/components/enclosures/c-class/index.html.
Warranty:
This product is covered by a global limited warranty and supported by HP Services and a worldwide network of
HP Authorized Channel Partners resellers. Hardware diagnostic support and repair is available for three years
from date of purchase. Support for software and initial setup is available for 90 days from date of purchase.
Enhancements to warranty services are available through HP Care Pack services or customized service
agreements. Hard drives have either a one year or three year warranty; refer to the specific hard drive
QuickSpecs for details.
NOTE: Server warranty includes 3 year Parts, 3 year Labor, 3-year on-site support. Warranty repairs may be
accomplished through the use of Customer Self Repair (CSR) parts. These parts fall into two categories: 1)
Mandatory CSR parts are designed for easy replacement. A travel and labor charge will result when customers
decline to replace a Mandatory CSR part; 2) Optional CSR parts are also designed for easy replacement but may
involve added complexity. Customers may choose to have HP replace Optional CSR parts at no charge.
Additional information regarding worldwide limited warranty and technical support is available at:
http://h18004.www1.hp.com/products/servers/platforms/warranty/index.html
DA - 13747 Worldwide QuickSpecs — Version 14 — 6.20.2011
Page 4
QuickSpecs
HP ProLiant BL620c Generation 7 Server Blade
Standard Features
NOTE: For the Standard Features shipped in the "Factory Integrated Models", please see the "Configuration Information Factory Integrated Models" section.
Processors
Ten-Core Processors
One or more of the
Intel® Xeon® E7-2870 (2.40GHz/10-core/30MB, 6.40GT/s QPI, 130W) Processor
following depending on
NOTE: Offered as Configure-To-Order. See the Factory Integrated Models section for more details.
model
Intel® Xeon® E7-2860 2.26GHz/10-core/24MB, 6.40GT/s QPI, 130W) Processor
Intel® Xeon® E7-2850 (2.0GHz/10-core/24MB, 6.40GT/s QPI, 130W) Processor
Intel® Xeon® E7-8867L (2.13GHz/10-core/30MB, 6.40GT/s QPI, 105W) Processor
NOTE: Offered as Configure-To-Order. See the Factory Integrated Models section for more details.
Eight-Core Processors
Intel® Xeon® E7-2830 (2.13GHz/8-core/24MB, 6.40GT/s QPI, 105W) Processor
Intel® Xeon® E7-2820 (2.0GHz/8-core/18MB, 5.86GT/s QPI, 105W) Processor
NOTE: Offered as Configure-To-Order. See the Factory Integrated Models section for more details.
Intel® Xeon® X7560 (2.26GHz/8-core/24MB, 6.40GT/s QPI, 130W) Processor
NOTE: Offered as Configure-To-Order. See the Factory Integrated Models section for more details.
Intel® Xeon® X6550 (2.0GHz/8-core/18MB, 6.40GT/s QPI, 130W) Processor
Intel® Xeon® L7555 (1.86GHz/8-core/24MB, 6.40GT/s QPI, 95W) Processor
NOTE: Offered as Configure-To-Order. See the Factory Integrated Models section for more details.
Six-Core Processors
Intel® Xeon® E7-2803 (1.73GHz/6-core/18MB, 4.80GT/s QPI, 105W) Processor
NOTE: Offered as Configure-To-Order. See the Factory Integrated Models section for more details.
Intel® Xeon® E6540 (2.0GHz/6-core/18MB, 6.40GT/s QPI, 105W) Processor
Intel® Xeon® E7530 (1.86GHz/6-core/12MB, 5.86GT/s QPI, 105W) Processor
Four-Core Processors
Intel® Xeon® E6510 (1.73GHz/4-core/12MB, 4.80GT/s QPI, 95W) Processor
NOTE: The Intel Xeon E7-2800 series processors above are supported only on the BL620c G7
Intel Xeon E7-2800 server models.
NOTE: The Intel Xeon 6500/7500 series processors above are supported only on the BL620c G7
Intel Xeon 6500/7500 server models.
NOTE: All processors within the server must be identical.
NOTE: All servers support one or two processors.
NOTE: The minimum processor configuration is one processor that must be installed in socket
CPU1.
NOTE: If upgrading an existing BL620c G7 server to a different processor, the server's ROM must
be flashed to the latest BIOS prior to the upgrade.
NOTE: All processors support Intel® Hyper-threading.
NOTE: All processors support Intel® Turbo Boost Technology except the E7-2803 and E6510.
Upgradeability
Upgradeable to two processors
NOTE: All processors within the server must be identical.
NOTE: All servers support one or two processors.
NOTE: The minimum processor configuration is one processor that must be installed in socket
CPU1.
NOTE: If upgrading an existing BL620c G7 server to a different processor, the server's ROM must
be flashed to the latest BIOS prior to the upgrade.
NOTE: The Intel Xeon E7-2800 series processors above are supported only on the BL620c G7 Intel
Xeon E7-2800 server models.
NOTE: The Intel Xeon 6500/7500 series processors above are supported only on the BL620c G7
Intel Xeon 6500/7500 server models.
DA - 13747 Worldwide QuickSpecs — Version 14 — 6.20.2011
Page 5
QuickSpecs
HP ProLiant BL620c Generation 7 Server Blade
Standard Features
Cache Memory
Up to 30MB level 3 cache memory (BL620c G7 Intel Xeon E7-2800 models)
Up to 24MB level 3 cache memory (BL620c G7 Intel Xeon 6500/7500 models)
Chipset
Intel® 7500 chipset
Memory
Type
Standard
Maximum
DDR3-1333 and DDR3-1066 Registered DIMMs (RDIMM) (operating up
to 1066MHz)
32GB (4 x 8GB) (BL620c G7 Intel Xeon E7-2800 models only)
8GB (2 x 4GB) (BL620c G7 Intel Xeon 6500 models only)
1.0TB (32 x 32GB RDIMMs) (BL620c G7 Intel Xeon E7-2800 models)
512GB (32 x 16GB RDIMMs) (BL620c G7 Intel Xeon 6500/7500
models)
DDR3 memory options part number decoder
NOTE: See the "Memory" section for memory guidelines, installation rules, and additional general
information.
Network Controllers
Four (4) integrated HP NC553i 10Gb FlexFabric adapter ports supporting 10Gb/1Gb autosensing
Ethernet, FCoE, Flex-10, TCP/IP offload engine, hardware-based accelerated iSCSI, and iSCSI
boot.
NOTE: Fibre Channel over Ethernet (FCoE) capability requires the use of an HP Virtual Connect
FlexFabric 10Gb/24-port Module or HP 10GbE Pass-Thru Module.
NOTE: The Flex-10 capability requires the use of an HP Virtual Connect Flex-10 10Gb Ethernet
module or HP 10GbE Pass-Thru Module.
One (1) 10/100 network adapter port dedicated to iLO 3 Management
I/O Expansion Slots
Three (3) mezzanine expansion slots as follows:
Two (2) Type II (25 watts) x8 PCIe Gen2
One (1) Type I (15 watts) x4 PCIe Gen2
NOTE: Type II slots accept both Type I or Type II cards. Type I slots accepted Type I cards only.
Integrated
Manageability
HP Integrated Lights-Out 3 (iLO 3)
DA - 13747 Worldwide QuickSpecs — Version 14 — 6.20.2011
Page 6
QuickSpecs
HP ProLiant BL620c Generation 7 Server Blade
Standard Features
Storage Controller
Integrated SAS version 2.0 (6Gb) HP Smart Array P410i Controller with RAID 0 and 1.
NOTE: The P410i is configured with no cache allowing the end user to select the desired option (if
cache is desired in the first place).
NOTE: RAID 0 and 1 are supported on the P410i without the need for a cache option.
P410i 512MB and 1GB flash backed write cache (FBWC) options.
Optional Smart Array RAID mezzanine controllers (with BBWC and FBWC) for connection to
external storage.
NOTE: The server supports up to a combined total of two (2) battery cache options for the P410i
and/or optional Smart Array RAID controllers.
Optional IO Accelerator cards for high performance I/O.
Optional HP D2200sb PCIe Storage Blade for direct attached and shared storage within the c-Class
enclosures
Maximum Internal
Storage
Hot-plug SAS
Hot-plug SATA
Hot-plug SAS SSD
Hot-plug SATA SSD
Graphics
Integrated ATI RN-50 1280 x 1024 x 16M color
Resolution Color Depths 1280 x 1024, 16.7M , 64k, 256,16
1024 x 768, 16.7M, 64k, 256, 16
800 x 600, 16.7M, 64k, 256, 16
640 x 480, 16.7M, 64k, 256, 16
Fibre Channel
Up to three (3) optional 4Gb and/or 8Gb Fibre Channel HBA mezzanine adapters (Brocade, Emulex
and QLogic options).
Compatible SAN
HP ProLiant BL620c G7 server blades are optimized for HP MSA, EVA, and XPHP and are
compatible with select third party SANs. See the blade storage page for more details at
http://h18004.www1.hp.com/products/blades/components/c-class-sans.html.
HP Insight managementHP Insight Foundation
software
2.0TB
2.0TB
1.6TB
240GB
2 x 1.0TB drives
2 x 1.0TB drives
2 x 800GB drives
2 x 120GB drives
Managing the growing number of servers can be complex and expensive
for your organization. IT managers need to address changing business
needs with tools that meet the challenges of managing today's complex
Datacenters.
HP provides management solutions that are designed to simplify a
server's installation, configuration and maintenance throughout the entire
server lifecycle. This provides the customer with higher levels of
operational efficiency and highly reliable systems:
www.hp.com/go/foundation.
The foundation pack includes:
HP SmartStart
HP Management DVD
HP ProLiant Smart Update Firmware DVD
SmartStart version supported (minimum): SmartStart 8.60.
http://www.hp.com/servers/smartstart
NOTE: In an effort to support reducing our environmental impact, the HP
Insight Foundation Suite for ProLiant media will be available as a
selectable option for this server at time of order of a Factory Integrated
Model. This will allow customers to order the number of media kits that
best meet their needs and eliminate receiving unnecessary duplicate
DA - 13747 Worldwide QuickSpecs — Version 14 — 6.20.2011
Page 7
QuickSpecs
HP ProLiant BL620c Generation 7 Server Blade
Standard Features
media.
HP Integrated Lights-Out HP Integrated Lights-Out (iLO) simplifies server setup, health monitoring,
(iLO)
power and thermal control, and lights-out remote administration of
ProLiant ML, DL, and BL servers. HP iLO functions without additional
software and can be accessed from any location via a web browser. HP
iLO works hand-in-hand with HP Systems Insight Manager, Insight
Control, and Insight Dynamics for ProLiant, helping customers unleash
the value of the ProLiant platform and deliver the highest possible quality
of IT service. For more information, visit: www.hp.com/go/iLO
HP Insight Control
HP Insight Control, a product option, delivers essential infrastructure
management that can help save time and money by making it easy to
deploy, monitor, remote control, and optimize your IT infrastructure
through a single, simple management console.
Two versions of Insight Control are available, to serve environments
requiring either a Linux-based or a Windows-based central management
server: HP Insight Control for Linux, and HP Insight Control. See
www.hp.com/go/insightcontrol
HP Insight Control includes one year of 24 x 7 HP Software Technical
Support and Update Service ensuring rapid access to HP support staff
and proactive delivery of software updates. For more information about
this service, please visit: http://www.hp.com/services/insight
HP Insight Dynamics for HP Insight Dynamics for ProLiant, a product option, is an integrated
ProLiant
command center that enables IT Staff personnel to continuously analyze
and optimize a converged infrastructure, while automating and reducing
the cost of common data center tasks by as much as 40 percent. As a
powerfully integrated by design toolkit to accelerate complex technology
projects and simplify daily operations that ultimately enable IT Staff
personnel to dynamically keep pace with the organizations changing
business requirements. It enables them to plan capacity and power
continuously, balance across physical and virtual resources, and ensure
cost-effective high availability. It also enables IT organizations to
provision infrastructure consistently and automatically from pools of
shared resources using a self-service portal. Resources provisioned can
range from a single virtual machine to complex multi-tier environments
and their associated physical and virtual resource requirements. In
addition to the previous functional benefits, it also provides a costeffective disaster recovery for physical and virtual environments that
works with HP Continuous Access software for both the Enterprise
Virtual Array and the XP storage array allowing application environments
to be reactivated in minutes with the touch of a button to a remote
location.
NOTE: For more information, visit:
http://www.hp.com/go/insightdynamics
DA - 13747 Worldwide QuickSpecs — Version 14 — 6.20.2011
Page 8
QuickSpecs
HP ProLiant BL620c Generation 7 Server Blade
Standard Features
High Performance
Clusters
HP Cluster Platforms
HP Cluster Platforms are specifically engineered, factory-integrated
large-scale ProLiant clusters optimized for High Performance Computing,
with a choice of servers, networks and software. Operating system
options include specially priced offerings for Red Hat Enterprise Linux
and Novell SLES, as well as Microsoft Windows HPC Server. A Cluster
Platform Configurator simplifies ordering. http://www.hp.com/go/clusters
HPC Interconnects
High Performance Computing (HPC) interconnect technologies are
available for this server as part of the HP Cluster Platform portfolio.
These high-speed InfiniBand and Gigabit interconnects are fully
supported by HP when integrated within an HP cluster. Flexible, validated
solutions can be defined with the help of configuration tools.
http://www.hp.com/techservers/clusters/ucp/index.html
HP Cluster Management HP Cluster Management Utility (CMU) is an HP-licensed and HPUtility
supported suite of tools that are used to manage large-scale Linux
ProLiant systems. CMU includes software for the centralized
provisioning, management and monitoring of nodes. CMU makes the
administration of clusters user friendly, efficient, and effective.
http://www.hp.com/go/cmu
HP HPC Linux Value
HP HPC Linux Value Pack (Value Pack) is an HP-licensed and HPPack
supported specially priced software bundle for the development and
deployment of applications on HPC Cluster Platforms. Value Pack
includes the HPC Enterprise Edition suite of tools including the LSF
workload scheduler, the HP-MPI parallelization library. Also included are
the HP Unified Parallel C compiler and the HP Shmem library, as well as
the execution environments for the libraries and compiler. HP HPC Linux
Value Pack
Operating Systems and Microsoft Windows Server
Virtualization Software Red Hat Enterprise Linux (RHEL)
Support for ProLiant
SUSE Linux Enterprise Server (SLES)
Servers
Oracle Solaris
VMware Server
Citrix XenServer
NOTE: For more information on HP's Certified and Supported ProLiant Servers for OS and
Virtualization Software and latest listing of software drivers available for your server, including how
to purchase from HP, please visit our OS Support Site at: http://www.hp.com/go/supportos and our
driver download page http://www.hp.com/support/BL620cG7.
Availability
Memory
HP Memory Quarantine (Intel MCA Recovery) Ready. In conjunction with the operating
system support, allows a server to recover from uncorrectable memory errors which would
have otherwise caused a system crash. (BL620c G7 Intel Xeon E7-2800 models).
Double Device Data Correction (DDDC) Ready. DDDC provides the ability to save a DIMM
from being replaced due to a bad dram device (BL620c G7 Intel Xeon E7-2800 models).
Data Bus ECC protection for automatic correction from a single data bit error and detection of
double data error bits.
Advanced ECC/SDDC provides continued memory operation in the event of a single memory
device failure and allows removal of a single DRAM from the memory map if it exhibits a
failure and recovers its data into a new device.
Supports for both x4 and x8 Intel® SDDC.
Demand Scrubbing writes corrected data back to the memory once a correctable error is
detected on a read transaction.
DIMM Address/Control Bus Parity Protection provides a means to detect and protect
command and address errors.
Memory Failover uses a mirrored DIMM once a failed DIMM in a mirrored set is detected.
DA - 13747 Worldwide QuickSpecs — Version 14 — 6.20.2011
Page 9
QuickSpecs
HP ProLiant BL620c Generation 7 Server Blade
Standard Features
Memory Mirroring provides a copy of memory stored with dynamic failover in case of failure
within socket (intra-socket) memory mirroring.
The system will operate in non-hemisphere mode when mirroring is enabled.
Rank Sparring (On Line Spare) provides dynamic failover to a spare DIMM rank or spare rank
pair behind the same memory controller. Cannot be enabled concurrently with memory
mirroring.
NOTE: HP offers the rank sparing rather than DIMM sparing as rank sparing uses less spare
memory resulting in less overhead.
Failed DIMM Isolation identifies a specific failing DIMM lockstep pair thereby enabling the
user to replace only the failed DIMM pair. Identifies a single DIMM for correctable errors and
DIMM pair for uncorrectable errors.
Virtualization
Intel® VT-x (FlexMigration, FlexPriority, and Extended Page Tables) provides:
Platform control between the VMM and guest OSs for faster, more reliable and secure
transfers.
VM migration features that enhance flexibility for failover, load balancing, disaster
recovery, and maintenance.
Intel® VT-x Real Mode & Pause Loop Exiting (BL620c G7 Intel Xeon E7-2800 models):
Real Mode allows guests to operate in real mode, removing the performance overhead
and complexity of an emulator.
Pause Loop Exiting provides detection of spin locks in guest software and helps avoid
lock-holder preemption to reduce overhead and improve performance.
Intel® VT-d (Intel® Virtualization Technology for Directed I/O) enables the VMM to assign
specific I/O devices to specific guest OSs improving security and availability.
Mezzanine options and I/O
Optional dual-port Fibre Channel mezzanine cards for redundant SAN connections.
Optional dual-port InfiniBand mezzanine cards for redundant high performance connections.
Four embedded Ethernet adapter ports for redundant LAN connections.
Multiple mezzanine I/O expansion slots each supported multiple data paths routed to
redundant interconnect modules.
Network Adapter Teaming (Bonding) provides network fault tolerance, transmit load
balancing, and switch-assisted load balancing.
Processor/Chipset
Processor Internal Sensors & Thermal Control protection against over-temperature
conditions.
Cache parity/ECC protects cache data from accidental data corruption due to particle hits.
Machine Check Architecture (MCA) detects and captures hardware errors such as system
bus, ECC, parity, cache, other.
Enhanced MCA handling & error logging builds upon the original Machine Check Architecture
to: offers more "banks" and increased "resolution" for reporting errors that cause MCA events
and 2) sets check flags for the OS to poll.
External Bus Error Recovery (ECC) enables automatic correction from a single data bit error
and detection of double data error bits on the memory data bus.
Corrupt Data Containment tags faulty data before it is consumed (often called data poisoning)
to limit the impact to the currently running program and to greatly reduce the need to reset the
system.
On-Die Error Protection protects registers from particle hits.
Storage
Two hot-plug SAS/SATA/SSD drive bays.
Integrated HP Smart Array P410i Controller with RAID 0 and 1 standard
Integrated HP Smart Array P410i Controller upgradeable firmware with recovery ROM
capability
HP Smart Array P410i flash backed write cache (FBWC) options to 1GB.
DA - 13747 Worldwide QuickSpecs — Version 14 — 6.20.2011
Page 10
QuickSpecs
HP ProLiant BL620c Generation 7 Server Blade
Standard Features
Optional multiple Smart Array RAID mezzanine controllers (with BBWC and FBWC) for direct
attach and shared SAS storage external to the c-Class enclosure.
Optional HP D2200sb Storage Blade for direct attached and shared storage within the cClass enclosure.
Intel® QuickPath Interconnect (QPI)
QPI Link Retry restarts as cycle when a failure is detected on the link.
QPI Clock Failover redirects the forwarded clock to one of the two failover clock lanes in the
event of a forwarded clock failure.
QPI Self-Healing enables a QPI link to map a failed lane and downshift from full to ½ width (or
½ width to ¼ width) QPI link if there are errors on the link.
QPI Cycle Redundancy Checking (CRC) automatically detects data errors using a checksum
of either 8 bits or 16 bits.
QPI Poisoning tags an erroneous packet with a "poisoned bit" on the QPI fabric.
QPI Lane Failover identifies a faulty lane within data paths removing them from operation
reducing command/address errors.
Server Blade Enclosure Infrastructure
Up to 10 hot-plug redundant Active Cool fans per enclosure.
Up to 6 hot-plug high efficiency redundant power supplies per enclosure.
Dual grid power providing redundant rack enclosure power feeds to the enclosure.
Up to eight interconnect modules per enclosure providing four simultaneous redundant fabrics
for FlexFabric, Virtual Connect Ethernet, Fibre Channel, InfiniBand, iSCSI, SAS, etc.
Optional enclosure redundant Onboard Administrator system management module.
Industry Standard
Compliance
ACPI 2.0 Compliant
PCI 2.2 Compliant
Microsoft® Logo certifications
USB 2.0
Secure Digital 2.0
TMP 1.2
IEEE (see the NC553i Technical Specifications section)
Advanced Encryption Standard (AES)
Triple Data Encryption Standard (3DES)
SNMP
SSL 2.0
Active Directory v1.0 (Windows 2003)
IPMI 2.0
DMTF Systems Management Architecture for Server Hardware Command Line Protocol
(SMASH CLP)
DA - 13747 Worldwide QuickSpecs — Version 14 — 6.20.2011
Page 11
QuickSpecs
HP ProLiant BL620c Generation 7 Server Blade
Standard Features
Security
Security - Trusted
Platform Module
Intel® AES-NI (BL620c G7 Intel Xeon E7-2800 models)
Intel® Trusted Execution Technology (TXT) Ready (BL620c G7 Intel Xeon E7-2800 models)
Power-on password
Administrator's password
Integrated Lights-Out 3 with:
12 customizable user accounts
SSL encryption
Secure Shell version 2
Advanced Encryption Standard (AES) and Triple Data Encryption Standard (3DES) on
browser, CLP and XML scripting interface
AES and RC4 encryption of video
Disable via a global setting
Keyboard password
External USB port enable/disable
Network server mode
Serial interface control
TPM (Trusted Platform Module) 1.2 option
The BL620c G7 server includes a Trusted Platform Module (TPM) connector for an optional TPM
1.2 upgrade. The TPM 1.2 option is a microcontroller chip that can securely store artifacts used to
authenticate the server platform. These artifacts can include passwords, certificates and encryption
keys. Windows® BitLocker™ Drive Encryption (BitLocker) is a data protection feature available in
Windows Server® 2008. BitLocker leverages the enhanced security capabilities of TPM version 1.2.
The TPM works with BitLocker to help protect user data and to ensure that a server operating
Windows Server 2008 has not been tampered with while the system was offline.
NOTE: For more information about TPM, including a white paper, go to:
http://www.hp.com/go/TPM.
NOTE: ProLiant OS pre-installed units will come with the partition required for TPM deployment.
NOTE: The TPM key is unique to every TPM deployed server and must be retained. Misplacing or
losing the key could result in data loss.
Factory Express
Portfolio for Servers
and Storage
HP Factory Express offers configuration, customization, integration and deployment services for HP
servers and storage products. Customers can choose how their factory solutions are built, tested,
integrated, shipped and deployed.
Factory Express offers service packages for simple configuration, racking, installation, complex
configuration and design services as well as individual factory services, such as image loading,
asset tagging, and custom packaging. HP products supported through Factory Express include a
wide array of servers and storage: HP Integrity, HP ProLiant, HP ProLiant Server Blades, HP
BladeSystem, HP 9000 servers as well as the MSAxxxx, VA7xxx, EVA, XP, rackable tape libraries
and configurable network switches.
For more information on Factory Express services on your specific server model please contact
your sales representative or go to: http://www.hp.com/go/factory-express.
HP Enterprise
Configurator
The HP eConfigure Enterprise Configurator now provides factory default racking for our HP
hardware portfolio. This approach is aligned with our strategic direction to meet the needs and
expectations of our valued customers. If you require "custom" rack configuration, please contact
HP's Customer Business Center or an Authorized Partner for assistance.
http://www.hp.com/products/configurator
DA - 13747 Worldwide QuickSpecs — Version 14 — 6.20.2011
Page 12
QuickSpecs
HP ProLiant BL620c Generation 7 Server Blade
Service and Support
Service and Support
HP Technology Services for Industry Standard Servers and BladeSystem
Capitalizing on HP ProLiant server and HP BladeSystem capabilities requires a service partner who
understands your increasingly complex business technology environment. That's why it makes
sense to team up with the people who know HP infrastructure hardware and software best - the
experienced professionals at HP Services.
What HP ProLiant and BladeSystem Services can do for you
HP ProLiant and BladeSystem Services can help you design, deploy, test, integrate, support, and
manage IT and infrastructure solutions. This way, HP proposes services solutions that include more
than just uplift of base warranty. You can get the support you need by choosing from one of a
number of service packaged solutions we have designed to address wider set of customer support
needs.
HP Technology Services meets business challenges with services offered in three packages
Optimized Care Package, Standard Care Package, and Basic Care Package - available for each
product group. Such packaged solutions enable customers to optimize technology operations,
minimize risk and drive better business outcomes with easy-to-buy, easy-to-use scalable support
packages for servers, storage, networking and software.
Optimized Care
Package
Supports maintaining servers at optimum performance availability
HP Installation and Startup Service for HP BladeSystem c-Class Infrastructure for
c3000/c7000 enclosure
Provides for the installation and startup of a BladeSystem c3000 Infrastructure in a single blade
enclosure including hardware and software, including deployment of OS, HP SIM, RDP, RDP, PMP
and VPM.
http://h20195.www2.hp.com/V2/GetPDF.aspx/4AA0-5964ENW
3-Year HP Critical Advantage for c3000/c7000 enclosure + 3-Year HP Critical Advantage for
Blade server
Provides end-to-end infrastructure support solution for business critical applications running on
virtualized/x86 infrastructures, enabling the customers to cost effectively build, operate, and
continuously improve their IT environment. http://h20195.www2.hp.com/V2/GetDocument.aspx?
docname=4AA3-1772ENW
HP Installation and Startup Service for HP BladeSystem c-Class Enhanced Network
HP Provides for the configuration and testing of BladeSystem Ethernet interconnect switches to
facilitate proper implementation of network protocols and access to advanced features.
http://h20195.www2.hp.com/V2/GetPDF.aspx/4aa0-5969ENW
Additional Services: Virtualization Services - Strategy, Design, Transition, Operation, Continual
Service Improvement.
DA - 13747 Worldwide QuickSpecs — Version 14 — 6.20.2011
Page 13
QuickSpecs
HP ProLiant BL620c Generation 7 Server Blade
Service and Support
Standard Care PackagePackage that maintains high level of server availability
HP Installation and Startup Service for HP BladeSystem c-Class Infrastructure for
c3000/c7000 enclosure
Provides for the installation and startup of a BladeSystem c3000 Infrastructure in a single blade
enclosure including hardware and software, including deployment of OS, HP SIM, RDP, RDP, PMP
and VPM.
http://h20195.www2.hp.com/V2/GetPDF.aspx/4AA0-5964ENW
HP Installation and Startup Service for HP BladeSystem c-Class Enhanced Network
HP Provides for the configuration and testing of BladeSystem Ethernet interconnect switches to
facilitate proper implementation of network protocols and access to advanced features.
http://h20195.www2.hp.com/V2/GetPDF.aspx/4aa0-5969ENW
3-Year, HP 6 hour Hardware Support Onsite Call-to-Repair Service for c3000/c7000 enclosur
+ 3-Year, HP 6 hour Hardware Support Onsite Call-to-Repair Service for Blade server
Provides an IT manager with a team of support specialists who will quickly begin troubleshooting
the system to help return the hardware to operating condition within 6 hours of the initial service
request to the HP Global Solution Center.
http://h20195.www2.hp.com/V2/GetPDF.aspx/5982-6547EN.pdf
3-Year , HP 24x7 Software Support for Insight Control
Provides for the deployment and basic configuration of HP Insight Control on HP ProLiant ML and
DL series servers or HP BladeSystem servers.
http://h20195.www2.hp.com/V2/GetPDF.aspx/5981-6645EEE.pdf
Additional Services - Software OS (Microsoft, Linux (SUSE/Red Hat) & VMware Installation &
Start Up and Software Support); Microsoft or Linux or VMware education courses; +60 Proactive
Select Credits, Factory Express.
Basic Care Package
Delivers minimum recommended support service level
HP Installation and Startup Service for HP BladeSystem c-Class Infrastructure for
c3000/c7000 enclosure
Provides for the installation and startup of a BladeSystem c3000 Infrastructure in a single blade
enclosure including hardware and software, including deployment of OS, HP SIM, RDP, RDP, PMP
and VPM.
http://h20195.www2.hp.com/V2/GetPDF.aspx/4AA0-5964ENW
3-Year, HP 24x7 4 hour Response, Hardware Support Onsite Service for c3000/c7000
enclosure + 3-Year, HP 24x7 4 hour Response, Hardware Support Onsite Service for Blade
server
Provides you with rapid remote support and if required an HP authorized representative who will
arrive on site any time and day of the year to begin hardware maintenance service within 4 hours of
the service request being logged.
http://h20195.www2.hp.com/V2/GetPDF.aspx/5982-6547EEE
3-Year , HP 24x7 Software Support for Insight Control
Provides for the deployment and basic configuration of HP Insight Control on HP ProLiant ML and
DL series servers or HP BladeSystem servers.
http://h20195.www2.hp.com/V2/GetPDF.aspx/5981-6645EEE.pdf
Additional Services - Startup Blade System c-Cass Enhanced Network Service; Software OS
(Microsoft, Linux (SUSE/Red Hat) & VMware Installation & Start Up and Software Support); +30
Proactive Select Credits, Factory Express.
DA - 13747 Worldwide QuickSpecs — Version 14 — 6.20.2011
Page 14
QuickSpecs
HP ProLiant BL620c Generation 7 Server Blade
Service and Support
Insight Remote Support The packages include HP Insight Remote Support that uses proven technology to deliver secure,
reliable 24x7 remote monitoring, diagnoses, and problem resolution. It is available at no additional
cost to all warranty, HP Care Pack Service, and service agreement customers.
For more information
To learn more on HP ProLiant servers and HP BladeSystem servers, please contact your HP sales
representative or HP Authorized Channel Partner. Or visit: www.hp.com/services/bladesystem
DA - 13747 Worldwide QuickSpecs — Version 14 — 6.20.2011
Page 15
QuickSpecs
HP ProLiant BL620c Generation 7 Server Blade
Models
Intel Xeon E7-2800 Models
NOTE: For the Standard Features shipped in the "Factory Integrated Models", please see the "Configuration Information Factory Integrated Models" section.
NOTE: Not all models are available in all regions. Check with your local country HP offices for availability.
HP ProLiant BL620c G7 Processor(s)
(1) Intel® Xeon® E7-2860 (2.26GHz/10-core/24MB, 6.40GT/s QPI,
E7-2860 1P 32GB-R
One of the following
130W) Processor
Server
depending on Model
(1) Intel® Xeon® E7-2850 (2.0GHz/10-core/24MB, 6.40GT/s QPI, 130W)
643763-B21
Processor
(1) Intel® Xeon® E7-2830 (2.13GHz/8-core/24MB, 6.40GT/s QPI, 105W)
HP ProLiant BL620c G7
Processor
E7-2850 1P 32GB-R
Cache Memory
24MB L3 cache
Server
Memory
32GB (4 x 8GB) DDR3-1333 RDIMMs (operating up to 1066MHz)
643764-B21
Network Controllers
Four (4) integrated HP NC553i 10Gb FlexFabric adapter ports supporting
10Gb/1Gb autosensing Ethernet, FCoE, Flex-10, TCP/IP offload engine,
HP ProLiant BL620c G7
hardware-based accelerated iSCSI, and iSCSI boot
E7-2830 1P 32GB-R
One (1) 10/100 network adapter port dedicated to iLO 3 Management
Server
643765-B21
Storage Controller
Integrated SAS version 2.0 (6Gb) HP Smart Array P410i Controller with
RAID 0 and 1
NOTE: The P410i is configured with no cache allowing the end user to
select the desired cache option (if cache is desired in the first place).
NOTE: RAID 0 and 1 are supported on the P410i without the need for a
cache option.
Two (2) cache slots for BBWC and/or FBWC battery options.
NOTE: The server supports up to a combined total of two (2) battery
cache options for the P410i and/or optional Smart Array RAID
controllers.
Hard Drives
No drives included; supports up to two (2) hot-plug SFF SAS/SATA/SSD
drives
Internal Storage
SAS: 2.0TB; SATA: 2.0TB; SAS SSD: 1.6TB; SATA SSD: 240GB
Optical Drive
None
Form Factor
Up to 4 blades in the HP BladeSystem c3000 enclosure
Up to 8 blades in the HP BladeSystem c7000 enclosure
Intel Xeon 6500 Models
HP ProLiant BL620c G7 Processor(s)
X6550 1P 8GB-R P410i One of the following
Hot Plug SAS/SATA 2 depending on Model
SFF Server
588964-B21
HP ProLiant BL620c G7
E6540 1P 8GB-R P410i
Hot Plug SAS/SATA 2 Cache Memory
SFF Server
One of the following
588965-B21
depending on Model
Memory
HP ProLiant BL620c G7
E7530 1P 8GB-R P410i Network Controllers
Hot Plug SAS/SATA 2
SFF Server
588963-B21
Storage Controller
HP ProLiant BL620c G7
E6510 1P 8GB-R P410i
(1) Intel® Xeon® X6550 (2.0GHz/8-core/18MB, 6.40GT/s QPI, 130W)
Processor
(1) Intel® Xeon® E6540 (2.0GHz/6-core/18MB, 6.40GT/s QPI, 105W)
Processor
(1) Intel® Xeon® E7530 (1.86GHz/6-core/12MB, 5.86GT/s QPI, 105W)
Processor
(1) Intel® Xeon® E6510 (1.73GHz/4-core/12MB, 4.80GT/s QPI, 95W)
Processor
18MB L3 cache (X6550 and E6540)
12MB L3 cache (E7530 and E6510)
8GB (2 x 4GB) DDR3-1333 RDIMMs (operating up to 1066MHz)
Four (4) integrated HP NC553i 10Gb FlexFabric adapter ports supporting
10Gb/1Gb autosensing Ethernet, FCoE, Flex-10, TCP/IP offload engine,
hardware-based accelerated iSCSI, and iSCSI boot
One (1) 10/100 network adapter ports dedicated to iLO 3 Management
Integrated SAS version 2.0 (6Gb) HP Smart Array P410i Controller with
RAID 0 and 1
NOTE: The P410i is configured with no cache allowing the end user to
DA - 13747 Worldwide QuickSpecs — Version 14 — 6.20.2011
Page 16
QuickSpecs
HP ProLiant BL620c Generation 7 Server Blade
Models
Hot Plug SAS/SATA 2
SFF Server
588966-B21
Hard Drives
Internal Storage
Optical Drive
Form Factor
select the desired cache option (if cache is desired in the first place).
NOTE: RAID 0 and 1 are supported on the P410i without the need for a
cache option.
Two (2) cache slots for BBWC and/or FBWC battery options.
NOTE: The server supports up to a combined total of two (2) battery
cache options for the P410i and/or optional Smart Array RAID
controllers.
No drives included; supports up to two (2) hot-plug SFF SAS/SATA/SSD
drives
SAS: 2.0TB; SATA: 2.0TB; SAS SSD: 1.6TB; SATA SSD: 240GB
None
Up to 4 blades in the HP BladeSystem c3000 enclosure
Up to 8 blades in the HP BladeSystem c7000 enclosure
DA - 13747 Worldwide QuickSpecs — Version 14 — 6.20.2011
Page 17
QuickSpecs
HP ProLiant BL620c Generation 7 Server Blade
Configuration Information - Factory Integrated Models
NOTE: This section lists some of the steps required to configure a Factory Integrated Model. To ensure only valid
configurations are ordered, HP recommends the use of an HP approved configurator. Contact your local sales
representative for information on Factory Integrated Model product offerings and requirements.
NOTE: HP does not allow factory integration of options into standard models listed above.
Configure-to-order servers must start with a Factory Integrated Model (CTO) Blade.
NOTE: FIO indicates that this option is a Factory Installable Option.
Step 1: Base Server Blade Configuration (Select a configurable Blade)
HP Models
HP ProLiant BL620c G7 Configure-to-order Server
NOTE: This server supports the Intel Xeon 6500/7500 series processors.
HP ProLiant BL620c G7 Configure-to-order Server
NOTE: This server supports the Intel Xeon E7-2800 series processors.
Configurable model ships with:
Four (4) integrated HP NC553i 10Gb FlexFabric adapter ports supporting
10Gb/1Gb autosensing Ethernet, FCoE, Flex-10, TCP/IP offload engine,
hardware-based accelerated iSCSI, and iSCSI boot
One (1) 10/100 network adapter port dedicated to iLO 3 Management
One (1) Integrated SAS version 2.0 (6Gb) HP Smart Array P410i Controller with
RAID 0 and 1
NOTE: The P410i is configured with no cache allowing the end user to select the
desired cache option (if cache is desired in the first place).
NOTE: RAID 0 and 1 are supported on the P410i without the need for a cache
option.
Two (2) cache slots for BBWC and/or FBWC battery options.
NOTE: The server supports up to a combined total of two (2) battery cache
options for the P410i and/or optional Smart Array RAID controllers.
Two (2) small form factor hot-plug SAS/SATA/SSD hard drive bays
Three (3) I/O expansion slots
One (1) integrated Lights-Out 3
Integrated USB, MicroSDHC, and TPM connectors
600332-B21
643786-B21
Step 2: Choose Required Options (one of the following from each list unless
otherwise noted):
HP Processors
NOTE: The BL620c G7 supports one or two processors.
NOTE: The minimum processor configuration is one processor that must be
installed in socket CPU1.
NOTE: All processors within the server must be identical.
NOTE: All Configure-to-Order processor kits contain one (1) processor.
NOTE: If two processors are desired, select one xxxxxx-L21 kit and one xxxxxxB21 kit.
Ten-Core Processors
HP BL620c G7 Intel® Xeon® E7-2870 (2.40GHz/10-core/30MB/130W) FIO
Processor Kit
HP BL620c G7 Intel® Xeon® E7-2860 (2.26GHz/10-core/24MB/130W) FIO
Processor Kit
HP BL620c G7 Intel® Xeon® E7-2850 (2.0GHz/10-core/24MB/130W) FIO
Processor Kit
HP BL620c G7 Intel® Xeon® E7-8867L (2.13GHz/10-core/30MB/105W) FIO
Processor Kit
Eight-Core Processors
HP BL620c G7 Intel® Xeon® E7-2830 (2.13GHz/8-core/24MB/105W) FIO
Processor Kit
DA - 13747 Worldwide QuickSpecs — Version 14 — 6.20.2011
643749-L21
643751-L21
643753-L21
643761-L21
643755-L21
Page 18
QuickSpecs
HP ProLiant BL620c Generation 7 Server Blade
Configuration Information - Factory Integrated Models
HP BL620c G7 Intel® Xeon® E7-2820 (2.0GHz/8-core/18MB/105W) FIO
Processor Kit
HP BL620c G7 Intel® Xeon® X7560 (2.26GHz/8-core/24MB/130W) FIO
Processor Kit
HP BL620c G7 Intel® Xeon® X6550 (2.0GHz/8-core/18MB/130W) FIO
Processor Kit
HP BL620c G7 Intel® Xeon® L7555 (1.86GHz/8-core/24MB/95W) FIO
Processor Kit
Six-Core Processors
HP BL620c G7 Intel® Xeon® E7-2803 (1.73GHz/6-core/18MB/105W) FIO
Processor Kit
HP BL620c G7 Intel® Xeon® E6540 (2.0GHz/6-core/18MB/105W) FIO
Processor Kit
HP BL620 G7 Intel® Xeon® E7530 (1.86GHz/6-core/12MB/105W) FIO
Processor Kit
Four-Core Processor
HP BL620c G7 Intel® Xeon® E6510 (1.73GHz/4-core/12MB/105W) FIO
Processor Kit
HP Memory
NOTE: All DDR3 memory option kits consist of one RDIMM per kit.
NOTE: PC3L is a low-voltage memory and is only available on the BL620c G7
Intel Xeon E7-2800 series models.
NOTE: See the "Memory" section for memory guidelines, installation rules, and
additional general information.
HP 2GB (1x2GB) Dual Rank x8 PC3-10600 (DDR3-1333) Registered CAS-9
Memory Kit
NOTE: This memory kit is only available on the BL620c G7 BL620c G7 Intel
Xeon 6500/7500 series models.
HP 4GB (1x4GB) Dual Rank x4 PC3-10600 (DDR3-1333) Registered CAS-9
Memory Kit
HP 8GB (1x8GB) Dual Rank x4 PC3-10600 (DDR3-1333) Registered CAS-9
Memory Kit
HP 8GB (1x8GB) Dual Rank x4 PC3L-10600 (DDR3-1333) Registered CAS-9
Low Power Memory Kit
NOTE: This memory kit is only available on the BL620c G7 Intel Xeon E7-2800
series models.
HP 16GB (1x16GB) Dual Rank x4 PC3L-10600 (DDR3-1333) Registered CAS-9
LP Memory Kit
NOTE: This memory kit is only available on the BL620c G7 Intel Xeon E7-2800
series models.
HP 16GB (1x16GB) Quad Rank x4 PC3-8500 (DDR3-1066) Registered CAS-7
Memory Kit
HP 32GB (1x32GB) Quad Rank x4 PC3L-8500 (DDR3-1066) Registered CAS-7
LP Memory Kit
NOTE: This memory kit is only available on the Intel Xeon BL620c G7 E7-2800
series models.
DA - 13747 Worldwide QuickSpecs — Version 14 — 6.20.2011
643757-L21
603608-L21
589082-L21
603612-L21
643759-L21
589084-L21
603610-L21
589086-L21
500656-B21
500658-B21
500662-B21
604506-B21
627812-B21
500666-B21
627814-B21
Page 19
QuickSpecs
HP ProLiant BL620c Generation 7 Server Blade
Configuration Information - Factory Integrated Models
Step 3: Choose Additional Options for Factory Integration
NOTE: For additional options, including server blade enclosures interconnect and mezzanine options and power subsystem
options; please see the Core Options and Additional sections below and the following:
HP BladeSystem c3000 Enclosure QuickSpecs:
http://h18000.www1.hp.com/products/quickspecs/12790_div/12790_div.html
HP BladeSystem c7000 Enclosure QuickSpecs:
http://h18000.www1.hp.com/products/quickspecs/12810_div/12810_div.html
HP BladeSystem c-Class Interconnect and Mezzanine Components QuickSpecs:
http://h18004.www1.hp.com/products/blades/components/c-class-interconnects.html
http://h18004.www1.hp.com/products/blades/components/c-class-adapters.html
DA - 13747 Worldwide QuickSpecs — Version 14 — 6.20.2011
Page 20
QuickSpecs
HP ProLiant BL620c Generation 7 Server Blade
Core Options
NOTE: For additional "Core Options" and "Additional Options" please see the options sections below.
HP Ethernet Mezzanine Gigabit Ethernet Mezzanines
Options
HP NC325m PCI Express Quad Port Gigabit Server Adapter
HP NC364m Quad Port 1GbE BL-c Adapter
HP NC382m PCI Express Dual Port Multifunction Gigabit Server Adapter
10 Gigabit Ethernet Mezzanines
NOTE: A 10 Gigabit Ethernet adapter is required for each server blade connecting
to a 10Gb interconnect in bays 3-8 (HP BladeSystem c7000 Enclosure) or bays 24 (HP BladeSystem c3000 Enclosure).
NOTE: Each 10 Gigabit Ethernet adapter requires a minimum of 2GB of server
memory.
NOTE: A 10 Gigabit Ethernet adapter will down speed to 1Gb if paired with a
1GbE interconnect.
NOTE: HP recommends 10Gb adapters be installed in an x8 PCIe slot for optimal
performance.
HP NC532m Dual Port 10GbE Multifunction BL-c Adapter
HP NC542m Dual Port Flex-10 10GbE BL-c Adapter
HP NC552m 10Gb 2-port Flex-10 Ethernet Adapter
HP NC553m 10Gb 2-port FlexFabric Adapter
HP Fibre Channel
Mezzanine Options
HP Processors
4Gb Fibre Channel mezzanine adapters
Emulex LPe1105 4Gb Fibre Channel Host Bus Adapter for c-Class BladeSystem
QLogic QMH2462 4Gb Fibre Channel Host Bus Adapter for c-Class BladeSystem
8Gb Fibre Channel mezzanine adapters
Emulex LPe1205 8Gb Fibre Channel Host Bus Adapter for c-Class BladeSystem
QLogic QMH2562 8Gb Fibre Channel Host Bus Adapter for c-Class BladeSystem
HP BLc Brocade 804 8Gb Fibre Channel Host Bus Adapter
NOTE: The BL620c G7 supports one or two processors.
NOTE: The minimum processor configuration is one processor that must be
installed in socket CPU1.
NOTE: All processors within the server must be identical.
NOTE: All -B21 processor kits listed below contain one (1) processor.
NOTE: If upgrading an existing BL620c G7 server to a different processor, the
server's ROM must be flashed to the latest BIOS prior to the upgrade.
Ten-Core Processors
HP BL620c G7 Intel® Xeon® E7-2870 (2.40GHz/10-core/30MB/130W) Processor
Kit
HP BL620c G7 Intel® Xeon® E7-2860 (2.26GHz/10-core/24MB/130W) Processor
Kit
HP BL620c G7 Intel® Xeon® E7-2850 (2.0GHz/10-core/24MB/130W) Processor
Kit
HP BL620c G7 Intel® Xeon® E7-8867L (2.13GHz/10-core/30MB/105W)
Processor Kit
Eight-Core Processors
HP BL620c G7 Intel® Xeon® E7-2830 (2.13GHz/8-core/24MB/105W) Processor
Kit
HP BL620c G7 Intel® Xeon® E7-2820 (2.0GHz/8-core/18MB/105W) Processor
Kit
HP BL620c G7 Intel® Xeon® X7560 (2.26GHz/8-core/24MB/130W) Processor Kit
HP BL620c G7 Intel® Xeon® X6550 (2.0GHz/8-core/18MB/130W) Processor Kit
DA - 13747 Worldwide QuickSpecs — Version 14 — 6.20.2011
416585-B21
447883-B21
453246-B21
467799-B21
539857-B21
610609-B21
613431-B21
403621-B21
403619-B21
456972-B21
451871-B21
590647-B21
643749-B21
643751-B21
643753-B21
643761-B21
643755-B21
643757-B21
603608-B21
589082-B21
Page 21
QuickSpecs
HP ProLiant BL620c Generation 7 Server Blade
Core Options
HP BL620c G7 Intel® Xeon® L7555 (1.86GHz/8-core/24MB/95W) Processor Kit
Six-Core Processors
HP BL620c G7 Intel® Xeon® E7-2803 (1.73GHz/6-core/18MB/105W) Processor
Kit
HP BL620c G7 Intel® Xeon® E6540 (2.0GHz/6-core/18MB/105W) Processor Kit
HP BL620 G7 Intel® Xeon® E7530 (1.86GHz/6-core/12MB/105W) Processor Kit
Four-Core Processor
HP BL620c G7 Intel® Xeon® E6510 (1.73GHz/4-core/12MB/105W) Processor Kit
HP Memory
NOTE: All DDR3 memory option kits consist of one RDIMM per kit.
NOTE: PC3L is a low-voltage memory and is only available on the BL620c G7
Intel Xeon E7-2800 series models.
NOTE: See the "Memory" section for memory guidelines, installation rules, and
additional general information.
HP 2GB (1x2GB) Dual Rank x8 PC3-10600 (DDR3-1333) Registered CAS-9
Memory Kit
NOTE: This memory kit is only available on the BL620c G7 Intel Xeon 6500/7500
series models.
HP 4GB (1x4GB) Dual Rank x4 PC3-10600 (DDR3-1333) Registered CAS-9
Memory Kit
HP 8GB (1x8GB) Dual Rank x4 PC3-10600 (DDR3-1333) Registered CAS-9
Memory Kit
HP 8GB (1x8GB) Dual Rank x4 PC3L-10600 (DDR3-1333) Registered CAS-9
Low Power Memory Kit
NOTE: This memory kit is only available on the BL620c G7 Intel Xeon E7-2800
series models.
HP 16GB (1x16GB) Dual Rank x4 PC3L-10600 (DDR3-1333) Registered CAS-9
LP Memory Kit
NOTE: This memory kit is only available on the BL620c G7 Intel Xeon E7-2800
series models.
HP 16GB (1x16GB) Quad Rank x4 PC3-8500 (DDR3-1066) Registered CAS-7
Memory Kit
HP 32GB (1x32GB) Quad Rank x4 PC3L-8500 (DDR3-1066) Registered CAS-7
LP Memory Kit
NOTE: This memory kit is only available on the BL620c G7 Intel Xeon E7-2800
series models.
DA - 13747 Worldwide QuickSpecs — Version 14 — 6.20.2011
603612-B21
643759-B21
589084-B21
603610-B21
589086-B21
500656-B21
500658-B21
500662-B21
604506-B21
627812-B21
500666-B21
627814-B21
Page 22
QuickSpecs
HP ProLiant BL620c Generation 7 Server Blade
Core Options
HP Hard Drives
NOTE: The components of a storage subsystem (e.g. the drive, the
HBA/controller, firmware, and the server backplane) should operate at the same
data transfer rate or the system bandwidth will be negotiated down to an
acceptable level for all components.
NOTE: Hard drives have either a one year or three year warranty; refer to the
specific hard drive QuickSpecs for details.
NOTE: Different hard drives types may be mixed, but logical drive partitioning (i.e.
RAID capability) is not supported.
NOTE: Two drives are required for RAID 0 and 1.
SAS Hot Plug SFF (2.5-inch) Enterprise (ENT) Drives
HP 900GB 6G SAS 10K rpm SFF (2.5-inch) Enterprise 3yr Warranty Hard Drive
HP 600GB 6G SAS 10K rpm SFF (2.5-inch) Dual Port Enterprise 3yr Warranty
Hard Drive
HP 450GB 6G SAS 10K rpm SFF (2.5-inch) Dual Port Enterprise 3yr Warranty
Hard Drive
HP 300GB 6G SAS 10K rpm SFF (2.5-inch) Dual Port Enterprise 3yr Warranty
Hard Drive
HP 146GB 6G SAS 15K rpm SFF (2.5-inch) Dual Port Enterprise 3yr Warranty
Hard Drive
HP 72GB 6G SAS 15K rpm SFF (2.5-inch) Dual Port Enterprise 3yr Warranty
Hard Drive
SAS Hot Plug SFF (2.5-inch) Midline (MDL) Drives
HP 1TB 6G SAS 7.2K rpm SFF (2.5-inch) Hot Plug Midline 1yr Warranty Hard
Drive
HP 500GB 6G SAS 7.2K rpm SFF (2.5-inch) Dual Port Midline 1yr Warranty Hard
Drive
NOTE: Please see the QuickSpecs for additional information:
http://h18000.www1.hp.com/products/quickspecs/12244_div/12244_div.html
SATA Hot Plug SFF (2.5-inch) Midline (MDL) Drives
HP 1TB 3G SATA 7.2K rpm SFF (2.5-inch) Hot Plug Midline 1yr Warranty Hard
Drive
HP 500GB 3G SATA 7.2K rpm SFF (2.5-inch) Midline 1yr Warranty Hard Drive
HP 160GB 3G SATA 7.2K rpm SFF (2.5-inch) Midline 1yr Warranty Hard Drive
SATA Hot Plug Midline (MDL) Solid State Drives
HP 120GB 3G SATA SFF (2.5-inch) Midline 1yr Warranty Solid State Drive
HP 60GB 3G SATA SFF (2.5-inch) Midline 1yr Warranty Solid State Drive
NOTE: Please see the QuickSpecs for additional information:
http://h18000.www1.hp.com/products/quickspecs/13021_div/13021_div.html
6G SAS Hot Plug Enterprise Performance Solid State Drives
HP 400GB 6G SAS SLC SFF (2.5-inch) Enterprise Performance 3yr Warranty
Solid State Drive
HP 200GB 6G SAS SLC SFF (2.5-inch) Enterprise Performance 3yr Warranty
Solid State Drive
6G SAS Hot Plug Enterprise Mainstream Solid State Drives
HP 800GB 6G SAS MLC SFF (2.5-inch) Enterprise Mainstream 3yr Warranty
Solid State Drive
HP 400GB 6G SAS MLC SFF (2.5-inch) Enterprise Mainstream 3yr Warranty
Solid State Drive
HP 200GB 6G SAS MLC SFF (2.5-inch) Enterprise Mainstream 3yr Warranty
Solid State Drive
NOTE: Please see the QuickSpecs for additional information:
http://h18000.www1.hp.com/products/quickspecs/13021_div/13021_div.html
DA - 13747 Worldwide QuickSpecs — Version 14 — 6.20.2011
619291-B21
581286-B21
581284-B21
507127-B21
512547-B21
512545-B21
605835-B21
507610-B21
625609-B21
507750-B21
530888-B21
572073-B21
572071-B21
632494-B21
632492-B21
632506-B21
632504-B21
632502-B21
Page 23
QuickSpecs
HP ProLiant BL620c Generation 7 Server Blade
Additional Options
HP Insight Software
Insight Control
HP Insight Control including 1yr 24x7 Technical Support and Updates Electronic
License
HP Insight Control including 1yr 24x7 Technical Support and Updates Single
Server License
HP Insight Software Media Kit
NOTE: Insight Software DVD media without licenses. Contains HP Systems
Insight Manager, HP Insight Control, HP Insight Dynamics, HP Insight Control for
Microsoft System Center, and Virtual Connect Enterprise Manager software.
Uses an integrated installer to perform quick and accurate software installation
and updates.
NOTE: Licenses ship without media. The Insight Control Media Kit can be
ordered separately, or can be downloaded at:
http://www.hp.com/go/insightupdates.
NOTE: Electronic licenses can be used to purchase multiple licenses with a
single activation key, and are available in all countries except China and Japan.
Customers in China and Japan should order the physical equivalent
NOTE: Customer will receive a license entitlement certificate, which must be
redeemed online or via fax in order to obtain the license activation key(s).
Includes one year of 24 x 7 HP Software Technical Support Service.
NOTE: For additional License Kits, please see the QuickSpecs at:
http://h18000.www1.hp.com/products/quickspecs/12631_div/12631_div.html
HP Insight Control for Linux
HP Insight Control for Linux including 1yr 24x7 Support Electronic License
NOTE: This part number can be purchased as a single license or as multiple
licenses with a single activation key. Customer will receive a license entitlement
certificate via e-mail. The license entitlement certificate must be redeemed
online or via fax in order to obtain the license activation key(s). Includes one
year of 24 x 7 HP Software Technical Support and Update Service.
NOTE: Electronic LTUs are only available through limited points of sales; if not
available, order a printed license entitlement certificate instead.
HP Insight Control for Linux including 1yr 24x7 Support Single Server License
HP Insight Control for Linux Media Kit
NOTE: This optional Media pack DVD contains the ISO image for HP Insight
Control for Linux, HP Systems Insight Manager, HP Insight Control power
management, HP Insight Control virtual machine management, and an
integrated installer. Servers must be acquired separately.
NOTE: This Media pack is optional because the latest ISO image and latest
updates may be downloaded at no cost from: http://www.hp.com/go/ic-linux (click
on Download button).
NOTE: Licenses ship without media. The Media Kit for Insight Control for Linux
can be ordered separately, or can be downloaded at: http://www.hp.com/go/iclinux (click on Download button).
NOTE: Electronic licenses can be used to purchase multiple licenses with a
single activation key, and are available in all countries except China and Japan.
Customers in China and Japan should order the physical equivalent.
NOTE: Customer will receive a license entitlement certificate, which must be
redeemed online or via fax in order to obtain the license activation key(s).
Includes one year of 24 x 7 HP Software Technical Support Service.
NOTE: For additional License Kits, please see the QuickSpecs at:
http://h18000.www1.hp.com/products/quickspecs/13019_div/13019_div.html
HP Integrated Lights-Out (iLO) Advanced for ProLiant BladeSystem Remote
Management
HP iLO Advanced for BladeSystem including 1yr 24x7 Support Electronic
License
HP iLO Advanced for BladeSystem including 1yr 24x7 Support Single Server
DA - 13747 Worldwide QuickSpecs — Version 14 — 6.20.2011
T9074BAE
452148-B22
436222-B21
TC213AAE
TC209A
TC208A
TA851AAE
512488-B21
Page 24
QuickSpecs
HP ProLiant BL620c Generation 7 Server Blade
Additional Options
License
NOTE: Licenses ship without media. The Media Kit for Insight Control for Linux
can be ordered separately, or can be downloaded at:
http://www.hp.com/go/insightupdates.
NOTE: Electronic licenses can be used to purchase multiple licenses with a
single activation key, and is available in all countries except China and Japan.
Customers in China and Japan should order the physical equivalent.
NOTE: Customer will receive a license entitlement certificate, which must be
redeemed online or via fax in order to obtain the license activation key(s).
Includes one year of 24 x 7 HP Software Technical Support Service
NOTE: For additional license kits, including electronic delivery options, please
see the iLO QuickSpecs at:
http://h18000.www1.hp.com/products/quickspecs/12362_div/12362_div.html
HP Insight Control server deployment
HP Insight Control Server Deployment including 1yr 24x7 Support Electronic
License
HP Insight Control Server Deployment including 1yr 24x7 Support Single Server
License
NOTE: Licenses ship without media. The Media Kit for Insight Control for Linux
can be ordered separately, or can be downloaded at:
http://www.hp.com/go/insightupdates.
NOTE: Electronic licenses can be used to purchase multiple licenses with a
single activation key, and is available in all countries except China and Japan.
Customers in China and Japan should order the physical equivalent.
NOTE: Customer will receive a license entitlement certificate, which must be
redeemed online or via fax in order to obtain the license activation key(s).
Includes one year of 24 x 7 HP Software Technical Support Service.
NOTE: For additional license kits please see the Insight Control QuickSpecs at:
http://h18004.www1.hp.com/products/quickspecs/12631_div/12631_div.html
High Performance
Clusters
HP Cluster Management Utility
HP Cluster Management Utility Compute Node Flexible License
NOTE: This part number can be used to purchase one certificate for multiple
licenses with a single activation key. Each license is for one node (server).
Customer will receive a printed end user license agreement and license
entitlement certificate via physical shipment. The license entitlement certificate
must be redeemed online in order to obtain a license key.
HP Cluster Management Utility License and Media
NOTE: Order a minimum of one license per cluster to purchase media including
software and documentation, which will be delivered to the customer, and also
licenses CMU management. No license key is delivered or required.
NOTE: For additional license kits please see the QuickSpecs at:
http://h18004.www1.hp.com/products/quickspecs/12612_div/12612_div.html
HP HPC Linux Value Pack
HP High Performance Computing Linux Value Pack 1 Processor Flexible License
NOTE: This part number can be used to purchase one certificate for multiple
licenses with a single activation key. Each license is for one socket (a.k.a.
processor). Customer will receive a printed end user license agreement and
license entitlement certificate via physical shipment. The license entitlement
certificate must be redeemed online in order to obtain a license key.
HP High Performance Computing Linux Value Pack Media Kit
NOTE: This part number can be used to purchase media including software and
documentation, which will be delivered to the customer.
NOTE: For additional license kits please see the QuickSpecs at:
http://h18004.www1.hp.com/products/quickspecs/13485_div/13485_div.html
DA - 13747 Worldwide QuickSpecs — Version 14 — 6.20.2011
T9082AAE
452151-B21
QL803A
433257-B21
TC293B
TC294A
Page 25
QuickSpecs
HP ProLiant BL620c Generation 7 Server Blade
Additional Options
HP Storage Controllers NOTE: The P410i is configured with no cache allowing the end user to select the
desired cache option (if cache is desired in the first place).
NOTE: RAID 0 and 1 are supported on the P410i without the need for a cache
option.
NOTE: The server supports up to a combined total of two (2) battery cache
options for the P410i and/or optional Smart Array RAID controllers.
HP Smart Array P700m Controller
HP Smart Array P700m/512 4-ports Ext PCIe x8 SAS Controller
HP Smart Array P711m Controller
HP Smart Array P711m/1G 6Gb FBWC 4-ports Ext Mezzanine SAS Controller
NOTE: The P700m 512MB cache adds RAID 1+0 and 5.
Optional Upgrades
HP 512MB Flash Backed Write Cache
NOTE: This is an option for the HP Smart Array P410i Controller (P410i is
standard integrated controller).
HP 1GB Flash Backed Cache
NOTE: This is an option for the HP Smart Array P410i Controller (P410i is
standard integrated controller).
HP Smart Array P-Series Low Profile Battery
NOTE: Supports the HP Smart Array P700m Controller.
HP Smart Array Advanced Pack including 1yr 24x7 Technical Support and
Updates Single Server License
NOTE: The above HP Smart Array Advanced Pack and any above cache option
are required to enable Smart Array Advanced Pack features on the P410i. For
more information go to: http://www.hp.com/go/saap.
NOTE: The Smart Array Advanced Pack is hosted on the P410i Smart Array
Controller hardware firmware stack.
NOTE: Please see the QuickSpecs for Technical Specifications and additional
information:
http://h18000.www1.hp.com/products/quickspecs/13175_div/13175_div.html
(Worldwide)
(Smart Array P700m Controller)
http://h18000.www1.hp.com/products/quickspecs/13200_div/13200_div.html
(Worldwide)
(Smart Array Advanced Pack)
HP I/O Expansion
Options
HP 640GB IO Accelerator for BladeSystem c-Class
HP StorageWorks 320GB IO Accelerator for BladeSystem c-Class
NOTE: Please see the QuickSpecs for technical specifications and additional
information:
http://h18000.www1.hp.com/products/quickspecs/13220_div/13220_div.html
DA - 13747 Worldwide QuickSpecs — Version 14 — 6.20.2011
508226-B21
513778-B21
534916-B21
534562-B21
452348-B21
516471-B21
BK836A
AJ878B
Page 26
QuickSpecs
HP ProLiant BL620c Generation 7 Server Blade
Additional Options
HP c-Class Mezzanines HP InfiniBand Mezzanine Options
HP 4X QDR QLogic InfiniBand Dual Port Mezzanine HCA for c-Class
BladeSystem
HP 4X QDR InfiniBand ConnectX-2 Dual Port Mezzanine HCA for c-Class
BladeSystem
HP BL c-Class SB40c PCI Express Mezzanine Pass Thru Option Kit
NOTE: The HP PCI Express Mezzanine Pass-Thru Card is required to support
the HP Ultrium Tape Blades and the PCI Expansion Blade. Up to two Ultrium
Tape and/or PCI Expansion Blades are supported per server mix and match.
NOTE: The HP PCI Express Mezzanine Pass-Thru Card can be placed in
mezzanine slot 2 and/or 3.
HP Ultrium Tape BladesHP StorageWorks SB1760c Tape Blade
HP StorageWorks LTO-5 SB3000c Tape Blade
NOTE: The HP PCI Express Mezzanine Pass-Thru Card (P/N 431643-B21) is
required to support the Ultrium Tape Blades with the BL620c G7. Up to two
storage blades are supported per server mix and match (Ultrium Tape, PCI
Expansion Blades, and/or Storage Expansion Blades).
NOTE: The HP PCI Express Mezzanine Pass-Thru Card can be placed in
mezzanine slot 2 and/or 3.
NOTE: Please see the HP Ultrium Tape Blade QuickSpecs for technical
specifications and additional information at:
http://h18006.www1.hp.com/products/storageworks/sb_tapeblades/models.html.
HP D2200sb Storage Blade
NOTE: The HP PCI Express Mezzanine Pass-Thru Card (P/N 431643-B21) is
required to support the HP D2200sb PCIe Storage Blade with the BL620c G7. Up
to two storage blades are supported per server mix and match (Ultrium Tape, PCI
Expansion Blades, and/or Storage Expansion Blades).
NOTE: The HP PCI Express Mezzanine Pass-Thru Card can be placed in
mezzanine slot 2 and/or 3.
NOTE: Please see the HP s D2200sb PCIe Storage Blade QuickSpecs for
technical specifications and additional information at:
http://h18006.www1.hp.com/storage/bladesystem/index.html.
HP Expansion Blade
HP BLc PCI Expansion Blade
NOTE: Ships with one pre-installed PCI-X connect board. Also includes one PCIe
connect board which requires installation.
NOTE: The HP PCI Express Mezzanine Pass-Thru Card (P/N 431643-B21) is
required to support the HP PCI Expansion Blade with the BL620c G7. Up to two
expansion blades are supported per server mix and match (Ultrium Tape, PCI
Expansion Blades, and/or Storage Expansion Blades).
NOTE: The HP PCI Express Mezzanine Pass-Thru Card can be placed in
mezzanine slot 2 and/or 3.
NOTE: Please see the HP PCI Expansion Blade QuickSpecs for technical
specifications and additional information at
http://h18004.www1.hp.com/products/blades/expansion/index.html.
DA - 13747 Worldwide QuickSpecs — Version 14 — 6.20.2011
583210-B21
592519-B21
431643-B21
AQ697A
BS580A
AP880A
448018-B21
Page 27
QuickSpecs
HP ProLiant BL620c Generation 7 Server Blade
Additional Options
HP USB and SD
Options
HP Security - TPM
HP USB 2-Button Optical Scroll Mouse
HP USB 04 Standard Keyboard
HP 2GB USB Flash Media Drive Key Kit
NOTE: HP qualified blank USB key for use with HP ProLiant servers that support
the VMware virtualization environment and other HP value-add software like
SmartStart. HP recommends this industry standard USB flash device for use with
VMware ESXi. USB device must be installed in the internal slot of the ProLiant
server for use with VMware ESXi. Refer to HP VMware Getting Started Guide for
installation instructions.
HP 4GB Micro SDHC Flash Media Kit
NOTE: Blank SD media devices are supported for use with VMware and Citrix.
SD media must be installed in the internal slot of the ProLiant server. Learn more
at: http://www.hp.com/go/proliantvirtualization.
HP Trusted Platform Module Option
NOTE: The TPM key is unique to every TPM deployed server and must be
retained. Misplacing or losing the key could result in data loss.
HP Care Pack Services NOTE: The HP Care Pack service part numbers below for ProLiant BL c-Class
server blades, cover the server blade and all HP branded hardware options
qualified for the server, purchased at the same time or afterwards, internal to the
server.
Hardware Services On-site Service
HP 3 year 4 hour 13x5 BL6xxc Server Blade Hardware Support
HP 3 year 4 hour 24x7 BL6xxc Server Blade Hardware Support
HP 3 year 6 hour 24x7 Call to Repair BL6xxc Server Blade Hardware Support
DA - 13747 Worldwide QuickSpecs — Version 14 — 6.20.2011
DC172B
DT528A#ABA
608447-B21
647444-B21
488069-B21
UK108E
UK109E
UK110E
Page 28
QuickSpecs
HP ProLiant BL620c Generation 7 Server Blade
Memory
Memory Subsystem Architecture
For maximum memory bandwidth, performance, and capacity, each Intel® Xeon® E7-2800 and 6500/7500 series processor
socket contains two memory controllers. Each memory controller connects to two Intel® Scalable Memory Buffers (SMB) for
a total of four SMBs per processor. Each SMB connects to four RDIMMs for a grand total of sixteen RDIMMs per installed
processor (32 total RDIMMs per BL620c G7 server).
Maximum memory capacity is a function of the server model:
The BL620c G7 server models supporting Intel Xeon E7-2800 processors includes the new Intel® 7510 Scalable
Memory Buffer supporting up to 32GB DDR3 RDIMMs providing 1.0TB of memory (32GB RDIMMs x 32 DIMM slots).
The BL620c G7 server models supporting Intel Xeon 6500/7500 processors support up to 16GB DDR3 RDIMMs
providing 512MB of memory (16GB RDIMMs x 32 DIMM slots).
All RDIMMs will operate at the highest possible speed for a given processor. Memory speed is not affected by number of
RDIMMs or ranks. However, memory speed is a function of the processor QPI bus speed per the following:
Processors with a QPI speed of 6.40GT will operate memory at 1066MHz
Processors with a QPI speed of 5.86GT will operate memory at 978MHz
Processors with a QPI speed of 4.80GT will operate memory at 800MHz
DDR3 and DDR3L Memory Population Guidelines
An overview of the RDIMM installation guidelines are summarized below. For detailed memory configuration rules and
guidelines, please see the BL620c G7 user guide at: www.hp.com/support and the Online DDR3 Memory Configuration Tool
at: www.hp.com/go/ddr3memory-configurator.
1.
2.
3.
4.
Install only HP BL620c G7 supported DDR3 and DDR3L RDIMMs.
RDIMMs must be installed for processor 1.
Populate RDIMM slots for a processor only if the processor is installed.
To maximize performance in multi-processor configurations, distribute the total memory capacity between all
processors as evenly as possible.
5. The minimum configuration is two RDIMMs installed on processor 1.
6. RDIMMs must be installed in pairs with identical characteristics. When possible, for configuration simplicity, HP
recommends using RDIMMs with identical part numbers throughout the system.
7. For best performance, HP recommends that RDIMM pairs be populated in sequence by letter designation. Install
RDIMM pair (4A, 5A) first, followed by RDIMM pair (12B, 16B), RDIMM pair (2C, 7C), RDIMM pair (10D, 14D), RDIMM
pair (3E, 6E), RDIMM pair (11F, 15F), and RDIMM pair (1G, 8G).
8. When installing mixed rank RDIMMs for any processor, RDIMMs with the highest number of ranks must be installed in
the white RDIMM connector locations. This guarantees proper electrical signaling on the DDR3 channel since
RDIMMs with higher rank counts present larger electrical loading on the DDR3 channel and must be populated at the
end point of the channel.
9. 1.5V DDR3 and 1.35V DDR3L RDIMMs may be installed within the same socket. In this case, all RDIMMs on that
socket will operate at 1.5V.
10. The BL680c G7 supports memory hemisphere mode (for a high-performance memory interleaving technology) as well
as several advanced memory modes (AMP) including advanced ECC, online spare, and mirrored memory. Please see
the BL680c G7 user guide at: www.hp.com/support for a description of each of these features and their memory
configuration guidelines.
11. There are several additional recommended steps for memory performance optimization, please see the BL680c G7
user guide at: www.hp.com/support for a complete list.
Standard Memory
32GB (4 x 8GB) of dual-rank DDR3-1066 RDIMMs (BL620c G7 Intel Xeon E7-2800 models).
8GB (2 x 4GB) of dual-rank DDR3-1066 RDIMMs (BL620c G7 Intel Xeon 6500/7500 models).
Standard Memory Plus Optional Memory
Up to 832GB of memory is available with the installation of optional DDR3 RDIMM memory expansion kits (BL620c G7 Intel
Xeon E7-2800 models).
Up to 464GB of memory is available with the installation of optional DDR3 RDIMM memory expansion kits (BL620c G7 Intel
Xeon 6500/7500 models).
Model Standard Memory Replaced with Optional Memory
Up to 1.0TB of memory is available with the removal of standard memory and the installation of optional DDR3 RDIMM
DA - 13747 Worldwide QuickSpecs — Version 14 — 6.20.2011
Page 29
QuickSpecs
HP ProLiant BL620c Generation 7 Server Blade
Memory
memory expansion kits (BL620c G7 Intel Xeon E7-2800 models).
Up to 512MB of memory is available with the removal of standard memory and the installation of optional DDR3 RDIMM
memory expansion kits (BL620c G7 Intel Xeon 6500/7500 models).
BL620c G7 Intel Xeon E7-2800 Server Model Memory Configurations
Memory
Standard
32GB total
Optional
416GB per
CPU
(832GB total)
Maximum
512GB per
CPU
(1.0TB total)
Processor 1 RDIMM Slots
(Processor 2 has the same DIMM slot numeration, but all slots are empty)
1G
2C
3E
4A
5A
6E
7C
8G
Empty
Empty
Empty
8GB
8GB
Empty
Empty
Empty
9H
10D
11F
12B
13H
14D
15F
16B
Empty
Empty
Empty
Empty
Empty
Empty
Empty
Empty
Processor 1 RDIMM Slots
(Processor 2 has the same RDIMM configuration)
1G
2C
3E
4A
5A
6E
7C
8G
32GB
32GB
32GB
8GB
8GB
32GB
32GB
32GB
9H
10D
11F
12B
13H
14D
15F
16B
32GB
32GB
32GB
32GB
32GB
32GB
32GB
8GB
Processor 1 RDIMM Slots
(Processor 2 has the same RDIMM configuration)
1G
2C
3E
4A
5A
6E
7C
8G
32GB
32GB
32GB
32GB
32GB
32GB
32GB
32GB
9H
10D
11F
12B
13H
14D
15F
16B
32GB
32GB
32GB
32GB
32GB
32GB
32GB
32GB
BL620c G7 Intel Xeon 6500/7500 Server Model Memory Configurations
Memory
Standard
8GB total
Optional
232GB per
CPU
(464TB total)
Maximum
256GB per
CPU
(512GB total)
Processor 1 RDIMM Slots
(Processor 2 has the same RDIMM slot numeration, but all slots are empty)
1G
2C
3E
4A
5A
6E
7C
8G
Empty
Empty
Empty
4GB
4GB
Empty
Empty
Empty
9H
10D
11F
12B
13H
14D
15F
16B
Empty
Empty
Empty
Empty
Empty
Empty
Empty
Empty
Processor 1 RDIMM Slots
(Processor 2 has the same RDIMM configuration)
1G
2C
3E
4A
5A
6E
7C
8G
16GB
16GB
16GB
4GB
4GB
16GB
16GB
16GB
9H
10D
11F
12B
13H
14D
15F
16B
16GB
16GB
16GB
16GB
16GB
16GB
16GB
16GB
Processor 1 RDIMM Slots
(Processor 2 has the same RDIMM configuration)
1G
2C
3E
4A
5A
6E
7C
8G
16GB
16GB
16GB
16GB
16GB
16GB
16GB
16GB
9H
10D
11F
12B
13H
14D
15F
16B
16GB
16GB
16GB
16GB
16GB
16GB
16GB
16GB
DA - 13747 Worldwide QuickSpecs — Version 14 — 6.20.2011
Page 30
QuickSpecs
HP ProLiant BL620c Generation 7 Server Blade
Memory
HP ProLiant BL620c G7 memory options:
HP Memory
Following are the BL620c G7 memory options available from HP:
HP 2GB (1x2GB) Dual Rank x8 PC3-10600 (DDR3-1333) Registered CAS-9
Memory Kit
NOTE: This memory kit is only available on the BL620c G7 Intel Xeon
6500/7500 series models.
HP 4GB (1x4GB) Dual Rank x4 PC3-10600 (DDR3-1333) Registered CAS-9
Memory Kit
HP 8GB (1x8GB) Dual Rank x4 PC3-10600 (DDR3-1333) Registered CAS-9
Memory Kit
HP 8GB (1x8GB) Dual Rank x4 PC3L-10600 (DDR3-1333) Registered CAS-9
Low Power Memory Kit
NOTE: This memory kit is only available on the BL620c G7 Intel Xeon E7-2800
series models.
HP 16GB (1x16GB) Dual Rank x4 PC3L-10600 (DDR3-1333) Registered CAS-9
LP Memory Kit
NOTE: This memory kit is only available on the BL620c G7 Intel Xeon E7-2800
series models.
HP 16GB (1x16GB) Quad Rank x4 PC3-8500 (DDR3-1066) Registered CAS-7
Memory Kit
HP 32GB (1x32GB) Quad Rank x4 PC3L-8500 (DDR3-1066) Registered CAS-7
LP Memory Kit
NOTE: This memory kit is only available on the BL620c G7 Intel Xeon E7-2800
series models.
NOTE: All DDR3 memory option kits consist of one RDIMM per kit.
NOTE: PC3L is a low-voltage memory and is only available on the BL620c G7
Intel Xeon E7-2800 series models.
NOTE: For detailed memory configuration rules and guidelines, please see the
BL680c G7 user guide at: www.hp.com/support and use the Online DDR3
Memory Configuration Tool at: www.hp.com/go/ddr3memory-configurator.
DA - 13747 Worldwide QuickSpecs — Version 14 — 6.20.2011
500656-B21
500658-B21
500662-B21
604506-B21
627812-B21
500666-B21
627814-B21
Page 31
QuickSpecs
HP ProLiant BL620c Generation 7 Server Blade
Storage
1-2
2 x SFF SAS/SATA/SDD hot-plug hard drives
Hard Drives
NOTE: The components of a storage subsystem (e.g. the drive, the HBA/controller, firmware, and the server backplane)
should operate at the same data transfer rate or the system bandwidth will be negotiated down to an acceptable level for all
components.
NOTE: Different hard drives types may be mixed, but logical drive partitioning (i.e. RAID capability) is not supported.
NOTE: Hard drives have either a one year or three year warranty; refer to the specific hard drive QuickSpecs for details.
SAS Hot Plug SFF (2.5-inch) Enterprise (ENT) Drives
Quantity
Position
Supported
Supported Controller
900GB 6G SAS 10K
2
1-2
Smart Array P410i Controller
600GB 6G SAS 10K
450GB 6G SAS 10K
300GB 6G SAS 10K
146GB 6G SAS 15K
72GB 6G SAS 15K
SAS Hot Plug SFF (2.5-inch) Midline (MDL) Drives
Quantity
Position
Supported
Supported Controller
1.0TB 6G SAS 7.2K
2
1-2
HP Smart Array P410i Controller
500GB 6G SAS 7.2K
SATA Hot Plug SFF (2.5-inch) Midline (MDL) Drives
Quantity
Position
Supported
Supported Controller
1.0TB 3G SATA 7.2K
2
1-2
HP Smart Array P410i Controller
500GB 3G SATA 7.2K
160GB 3G SATA 7.2K
SATA Hot Plug Midline (MDL) Solid State Drives
Quantity
Position
Supported
Supported Controller
120GB 3G SATA SSD
2
1-2
HP Smart Array P410i Controller
60GB 3G SATA SSD
6G SAS Hot Plug Enterprise Performance Solid State Drives
Quantity
Position
Supported
Supported Controller
400GB 6G SAS SLC
2
1-2
HP Smart Array P410i Controller
200GB 6G SAS SLC
6G SAS Hot Plug Enterprise Mainstream Solid State Drives
Quantity
Position
Supported
Supported Controller
DA - 13747 Worldwide QuickSpecs — Version 14 — 6.20.2011
Page 32
QuickSpecs
HP ProLiant BL620c Generation 7 Server Blade
Storage
800GB 6G SAS MLC
400GB 6G SAS MLC
200GB 6G SAS MLC
2
1-2
HP Smart Array P410i Controller
DA - 13747 Worldwide QuickSpecs — Version 14 — 6.20.2011
Page 33
QuickSpecs
HP ProLiant BL620c Generation 7 Server Blade
Technical Specifications
System Unit
Dimensions
(H x W x D)
Weight
(approximate)
Power Specifications
System Inlet
Temperature
Relative Humidity
(non-condensing)
Altitude
Acoustic Noise
Full height, single-wide server blade:
14.46 x 2.19 x 20.09 in (36.73 x 5.49 x 51.03 cm)
Maximum
24.24lbs (11.00kg)
(all hard drives, DIMMs,
mezzanine cards, and
processors installed)
Minimum
17.9lbs (8.12kg)
(two hard drives, four
DIMMs, no mezzanine
cards, and two
processors installed)
For power specifications including input requirements, BTU rating, and
power supply output, please see the HP BladeSystem c-Class
Enclosures QuickSpecs located at:
HP BladeSystem c3000 Enclosure QuickSpecs:
http://h18000.www1.hp.com/products/quickspecs/12790_div/
12790_div.html
HP BladeSystem c7000 Enclosure QuickSpecs:
http://h18000.www1.hp.com/products/quickspecs/12810_div/
12810_div.html
To review typical system power ratings use the HP BladeSystem Power
Sizer available at: http://www.hp.com/go/bladesystem/powercalculator.
Operating
10° to 35°C (50° to 95°F) at sea level with an
altitude derating of 1.0°C per every 305 m
(1.8°F per every 1000 ft) above sea level to a
maximum of 3050 m (10,000 ft), no direct
sustained sunlight. Maximum rate of change
is 10°C/hr (18°F/hr). The upper limit may be
limited by the type and number of options
installed. System performance may be
reduced if operating with a fan fault or above
30°C (86°F).
Non-Operating
-30° to 60°C (-22° to 140°F), maximum rate of
change is 20°C/hr (36°F/hr).
Operating
10 to 85% relative humidity (Rh), 28°C
(82.4°F) maximum wet bulb temperature, noncondensing.
Non-Operating
10 to 95% relative humidity (Rh), 38.7°C
(101.7°F) maximum wet bulb temperature,
non-condensing.
Operating
3050 m (10,000 ft). This value may be limited
by the type and number of options installed.
Maximum allowable altitude change rate is
457 m/min (1500 ft/min).
Non-operating
9144 m (30,000 ft). Maximum allowable
altitude change rate is 457 m/min (1500
ft/min).
For acoustic noise specifications, please see the HP BladeSystem cClass Enclosures QuickSpecs located at:
HP BladeSystem c3000 Enclosure QuickSpecs:
http://h18000.www1.hp.com/products/quickspecs/12790_div/
12790_div.html
HP BladeSystem c7000 Enclosure QuickSpecs:
http://h18000.www1.hp.com/products/quickspecs/12810_div/
12810_div.html
DA - 13747 Worldwide QuickSpecs — Version 14 — 6.20.2011
Page 34
QuickSpecs
HP ProLiant BL620c Generation 7 Server Blade
Technical Specifications
Smart Array P410i
Controller
Disk Drive and
Enclosure Interface
6G SAS (Serial Attached SCSI)
3G SATA (Serial Advanced Technology Attachment)
SAS Connectors
Two (2) internal (SFF8484) x4 wide port connectors
Cache Memory Speed DDR2-533MHz with 40 or 72-bit wide bus provides up to 4.2 GB/s
maximum bandwidth.
Server Interface
x4 5G PCIe Gen2 provides 2GB/s maximum bandwidth.
SAS Speed
x2 6G SAS provides 1.2GB/s maximum bandwidth.
Cache Memory
72-bit 1GB cache; ECC protection, capacitor-backed
Logical Drives
Up to 32 logical drives
Supported
Maximum Logical Drive2 TB (2 x 1 TB)
Capacity
Host Memory
64-bit, supporting greater than 4GB server memory space
Addressing
RAID Support
RAID 0 (Striping)
RAID 1 (Mirroring)
NOTE: RAID 0 and 1 require two drives installed in the server.
NOTE: RAID 0 and 1 are supported on the P410i without the need for a
cache option.
Upgradeable Firmware Upgradeable firmware with recovery ROM capability
HP NC553i10Gb
FlexFabric Adapter
Type
Integrated KR 10GbE with FlexFabric (Flex-10, FCoE, accelerated
iSCSI, iSCSI boot, 10GbE, 1GbE, TCP/IP offload engine)
Network Processor
Blade Engines 3 (BE3)
Data Transfer Method x8 PCI Express 2.0
Network Transfer Rate 20Gbps per port full duplex only (theoretical maximum value)
NOTE: Each port is autosensing 1Gb / 10Gb, and can interoperate with
1Gb HP BladeSystem c-Class interconnect components.
NOTE: Each port on the NC553i adapter transmits from the server at
20Gbps (theoretical) full duplex.
IEEE Compliance
802.1p QoS, 802.1Q VLAN tagging, 802.3ad link aggregation, 802.3ap
10GBase-KR, and 802.3x flow control
Standard Features
ProLiant Teaming including Network Fault Tolerance, Transmit
Load Balancing, and Switch-Assisted Load Balancing
9K Jumbo frames (4K Jumbo frames when in FCoE mode)
Microsoft Windows Receive Side Scaling (RSS)
FCoE or accelerated iSCSI mode
iSCSI boot
Flex-10 support
TCP/IP offload engine
10Gb Ethernet ort 1Gb Ethernet autosensing
Microsoft TCP chimney compliant
Supports 8 Physical Functions (PF)
Supports 128 Virtual Functions (VF):
Up to 32 VFs per PF
Support 128 MAC address
Traffic Shaping and QoS across each VF and PF:
NIC Fine-grain QoS 10 Mbps to 10Gbps in steps of 10Mbps
HBA fine-grain QoS 1000 IOPs to 500,000 IOPs in steps of 1000
IOPS
On-chip VM-VM switching
Traffic steering and isolation
Hardware based filtering for 128 VLANIDs with QinQ tag filtering
DA - 13747 Worldwide QuickSpecs — Version 14 — 6.20.2011
Page 35
QuickSpecs
HP ProLiant BL620c Generation 7 Server Blade
Technical Specifications
Protection against denial-of-service attacks & malfunctioning VMs
HP Integrated LightsOut 3 (iLO 3)
Architecture
Processor
Upgradeability
Video Support
Interfaces
Memory
Operating System
Support
PCI Express based health and remote management ASIC
PCI Express RISC processor core operating at 250MHz
Option firmware upgradeable via Flash ROM
1600 x 1200 DVR max resolution
One Ethernet network connection (10/100Mb/s)
128-MB DDR with ECC
Microsoft Windows 2008 R2
Microsoft Windows 2008 (32 bit and 64 bit)
Microsoft Windows Server 2008 Standard Edition (32bit and 64bit)
Microsoft Windows Server 2008 Enterprise Edition (32bit and 64bit)
Microsoft Windows Server 2003 and Windows Server 2003 R2, and
Windows Server 2003 for Extended Systems Standard Edition,
Enterprise Edition
Red Hat Enterprise Linux 5.4 (32 bit and 64 bit)
SUSE LINUX Enterprise Server 11 (32bit and 64bit)
SUSE LINUX Enterprise Server 10 (32bit and 64bit)
VMware ESX 4.0
VMware ESX 3.5.0
Microsoft Windows 2008 R2
Client System Support Microsoft Windows 7
Microsoft Windows XP Professional Edition
Microsoft Windows Vista Business and Ultimate Editions
Red Hat Enterprise Desktop 5.00
SUSE Linux Enterprise Desktop 11
SUSE Linux Enterprise Desktop 10
Client Browser Support Microsoft Internet Explorer 8
Microsoft Internet Explorer 7
Microsoft Internet Explorer 6
Firefox 3.5 (on supported Windows and Linux systems)
Firefox 3.0 (on supported Windows and Linux systems)
Command Line
Secure Shell and serial port access
Support
Secure Socket Layer
Secure Shell version 2
Security
Advanced Encryption Standard (AES) and Triple Data Encryption
Standard (3DES) on browser, CLP and XML scripting interface
AES encryption of video
RC4 encryption of video
Directory Support
Active Directory v1.0 (Windows 2003)
Services
Driver Support
HP ProLiant iLO3 Management Controller Driver Package
Management protocols SNMP, IPMI 2.0 (system and LAN interface), DMTF Systems
supported
Management Architecture for Server Hardware Command Line Protocol
(SMASH CLP), HP RIBCL XML
DA - 13747 Worldwide QuickSpecs — Version 14 — 6.20.2011
Page 36
QuickSpecs
HP ProLiant BL620c Generation 7 Server Blade
Technical Specifications
Environment-friendly
Products and
Approach
End-of-life
Management and
Recycling
Hewlett-Packard offers end-of-life HP product return, trade-in, and
recycling programs in many geographic areas. For trade-in information,
please go to: http://www.hp.com/go/green. To recycle your product,
please go to: http://www.hp.com/go/green or contact your nearest HP
sales office. Products returned to HP will be recycled, recovered or
disposed of in a responsible manner.
The EU WEEE directive (2002/95/EC) requires manufacturers to
provide treatment information for each product type for use by treatment
facilities. This information (product disassembly instructions) is posted
on the Hewlett Packard web site at: http://www.hp.com/go/green. These
instructions may be used by recyclers and other WEEE treatment
facilities as well as HP OEM customers who integrate and re-sell HP
equipment.
© Copyright 2011 Hewlett-Packard Development Company, L.P.
The information contained herein is subject to change without notice.
Microsoft is a US registered trademarks of Microsoft Corporation.
Intel, the Intel logo, Xeon and Xeon Inside are trademarks of Intel Corporation in the U.S. and other countries.
The only warranties for HP products and services are set forth in the express warranty statements accompanying such
products and services. Nothing herein should be construed as constituting an additional warranty. HP shall not be liable for
technical or editorial errors or omissions contained herein.
For hard drives, 1GB = 1 billion bytes (1,000 MB). Actual formatted capacity is less.
DA - 13747 Worldwide QuickSpecs — Version 14 — 6.20.2011
Page 37
Download PDF
Similar pages