Operating instruction
WFR-29C
3A81YD1000GBA
GB
Internet Radio / DAB+ / FM-RDS / USB
Network Music Player Digital Receiver
"Made for iPod," "Made for iPhone," and "Made for iPad" mean that an electronic accessory has been designed to connect specifically to iPod,
iPhone, or iPad, respectively, and has been certified by the developer to meet Apple performance standards. Apple is not responsible for the
operation of this device or its compliance with safety and regulatory standards. Please note that the use of this accessory with iPod, iPhone, or iPad
may affect wireless performance.
The iSangean App enables remote control of the WFR-29C running on your iPhone, iPod touch, iPad or Android smartphone.
iSangean is the remote control app for Sangean Internet radios and media streamers for your iPhone, iPod touch, iPad or Android smartphone. The
app allows selection of Internet radio stations, selection and control of media for UPnP/DLNA music streaming from a local computer, server or NAS
device, as well as control of FM radio and other functions (where these functions are present on the radio). The Now Playing screen provides radio
station or media information with direct control of the radio volume.
Download iSangean from Apple iTunes (Apple Store) and Google Play now!
Contents
Introduction ...................................................................................... 3-7
Before you can use this product ...................................................... 3-4
Controls and connections ............................................................... 5-6
Navigation controls ............................................................................ 7
Network configuration ................................................................... 8-16
Connecting your radio to your computer network ......................... 8-15
Network remote control options ....................................................... 16
Internet Radio mode .................................................................... 17-31
Internet Radio-the basics ................................................................. 17
Selecting a radio station by location and genre .......................... 18-20
Searching for a radio station by name ............................................. 21
Searching a new or popular station ................................................. 22
Selecting a podcast / BBC Listen Again .......................................... 23
Presetting stations ........................................................................... 24
Display modes ................................................................................. 26
Customizing your radio .................................................................... 27
Selecting favorite stations ........................................................... 29-31
Music Player mode ...................................................................... 32-48
Use with Windows, Apple Mac and Linux ........................................ 31
Accessing your files via UPnP .................................................... 32-33
Locating and playing media files using UPnP .................................. 34
Media selection ................................................................................ 35
Controlling playback ........................................................................ 36
Display modes ................................................................................. 38
Playlists ............................................................................................ 39
Wake On LAN .................................................................................. 42
Prune servers .................................................................................. 42
Windows 7 ‘Play to’ function (UPnP renderer) ............................ 43-44
Using USB memory devices ....................................................... 45-46
DAB mode .................................................................................... 47-55
Selecting a DAB radio station .......................................................... 48
Display modes ................................................................................. 49
Finding new DAB radio stations ...................................................... 50
Manual Tuning ................................................................................. 51
Dynamic Range Control Settings ..................................................... 52
Station order setup .......................................................................... 53
Prune stations ................................................................................. 54
FM mode ....................................................................................... 55-60
Manual tuning .................................................................................. 56
Scan setting ..................................................................................... 58
Stereo / Mono switching .................................................................. 59
Presetting stations in DAB and FM modes ...................................... 60
Listening to Spotify ..................................................................... 61-64
Clock and Alarms ......................................................................... 65-75
Automatically updating the clock ...................................................... 65
Setting the clock format ................................................................... 66
Manually setting the clock ........................................................... 67-68
Setting the alarm clock ............................................................... 69-71
Snooze timer .................................................................................... 73
Disabling alarms .............................................................................. 73
Sleep timer ....................................................................................... 74
Inactive standby ............................................................................... 75
Display and Auto .......................................................................... 76-81
Equalizer function ............................................................................ 76
Brightness control ............................................................................ 78
Language selection .......................................................................... 79
Headphone socket and Line out socket ........................................... 80
Auxiliary input socket ....................................................................... 81
Information ................................................................................... 82-90
Factory reset .................................................................................... 82
Software update ............................................................................... 83
Network profiles ............................................................................... 84
Software version display and Audio FAQ ......................................... 85
Accessing your audio files via a UPnP server using Windows Vista
and XP ........................................................................................ 86-87
Audio codecs ................................................................................... 88
Cautions and Specifications ....................................................... 89-90
GB
Before you can use this product
Battery operation
Before you can use your internet radio, you must have the following:
Battery operation using alkaline batteries
1. Remove the battery cover on the rear of the unit by pressing the catch.
● A broadband Internet connection (not required for DAB, FM or Music
Player functions).
● A wireless access point (WiFi) connection connected to your broadband
Internet Service Provider, preferably via a router. In many cases the
broadband modem, router and wireless access point will be a single
combined unit supplied by your Internet Service Provider or bought
from a computer store.
Note:
Before you insert the batteries, if you use non-rechargeable batteries,
make sure the NiMH/Alkaline switch which located inside the battery
compartment is switched to Alkaline position. If you use rechargeable
batteries, make sure to switch NiMH/Alkaline switch to NiMH position.
2. Insert six UM-2 (C size) batteries into the spaces in the compartment.
● If your wireless network is configured to use Wired Equivalent Privacy
(WEP) or WiFi Protected Access (WPA/WPA2) data encryption then
you either need to know the WEP, WPA or WPA2 key used for encryption
so you can get the internet radio to communicate with the network, or
your router needs to offer WiFi Protected Setup (WPS).
3. Take care to ensure all batteries are inserted with correct polarity as
shown on the rear cabinet. Replace the battery cover.
If connecting using WiFi, the internet radio will typically work within a
10-20 metre radio from your wireless access point. The actual range
achieved will depend upon the building type, other nearby wireless
network, and possible interference sources. DAB and FM radio
functions can operate wherever the internet radio is able to receive a
suitable broadcast signal.
5. If the radio is not to be used for any extended period of time, it is
recommended that the batteries are removed from the radio.
IMPORTANT:
Before you continue, make sure that your wireless access point or router
is powered up and working with your broadband Internet service (use your
computer to verify this). To get this part of the system working you must
read the instructions supplied with the wireless access point or router.
4. Reduced power, distortion and a “stuttering sound” are all signs that
the batteries need replacing.
IMPORTANT:
The batteries shall not be exposed to excessive heat such as sunshine,
fire or the like.
Battery operation using rechargeable batteries
Using the AC power adaptor
1. Slide the battery switch to the NiHM position.
The AC power adaptor required for this unit should be 12 volts DC at 1A
center pin positve.
2. Insert 6 UM-2 batteries into spaces in the compartment. Make
sure all batteries are inserted with the correct polarity as shown on
the rear cabinet. The radio is also designed to be used with NiMH
rechargeable batteries.
Note:
Do not use a mix of old and new rechargeable batteries.
Do not use a mix of full and empty rechargeable batteries.
Do not use batteries that have a different mAh capacity
Do not use damaged or leaking batteries
Insert the adaptor plug into the DC socket on the left side of the radio.
GB
Plug the adaptor into a standard mains socket outlet.
Whenever the adaptor is used, the batteries are automatically
disconnected. The AC adaptor should be disconnected from the main
supply when not in use.
3. Make sure the radio is switched off and connected to the AC adaptor.
When the charge indicator flashes yellow indicating batteries are
charging. Batteries will be fully charged in around 10 hours. The battery
shows steady yellow light when the battery charging is complete.
Note:
Duration for charging your battery fully can be varied according to
the mAh capacity of a battery. Higher mAh batteries required longer
charging time.
Important:
Under some conditions the charging LED indicator may switch off
after flashing briefly. This may happen if the batteries are already
freshly charged, or if the radio detects that you may be attempting
to recharge alkaline batteries or mixed different types or capacity of
rechargeable battery. In these cases the charging will be stopped.
Controls and connections
1. USB memory socket
2. Mode button
3. LCD display
4. Info button
5. Menu button
6. Back button
7. Forward button
8. Standby button
9. Battery charge indicator / Low battery indicator
10. Tuning Control Rotary / Select knob
11. Volume Control Rotary / Mute
12. Preset 5 / Stop button
13. Preset 4 / play / pause button
14. Preset 3
15. Preset 2 / Rewind button
16. Preset 1 / Fast-forward button
17. Loud speaker
GB
18. Handle
19. FM telescopic aerial
20. Auxiliary input jack
21. Line out jack
22. Headphone jack
23. DC in jack
24. Alkaline / NiMH / NiCad rechargeable battery switch
Navigation controls
This page describes the basic means of controlling your WFR-29C internet radio.
Instructions for each operating mode are given in the later section of this book.
1. Pressing the Standby button brings your radio out of Standby mode. Pressing Standby while
the radio is in use will cause it to return to the Standby mode with the clock display.
2. Pressing the Mode button gives you access to each of the operating modes: Internet Radio,
DAB+ radio, Music player, FM radio and Auxiliary Input.
Main menu
Internet radio
Spotify
Music player
DAB
FM
1
3. Pressing the Menu button will access the menu system, whereas the Info button allows the
display of information relating to the radio station or music file being played.
2
4. Many operations require the user to make a selection from the menu. Highlight the menu item
using the Tuning Control Rotary on the right side of the radio. Press the Tuning Control Rotary
to select that item. If there are more than five items in a menu, then the display will automatically
scroll up or down so that the additional items become visible. If there are many items in a menu,
then the radio allows the menu to “wrap around” in either direction. This can make it easier to
reach items at the end of a long menu, such as a list of countries or Internet radio stations.
3
5. If an error is made when navigating the menus, it is generally possible to go back to a higher
level menu by pressing the Back button.
3
4
5
Configuration
Connecting your radio to your computer network
1. Place your radio on a flat surface and plug the mains lead into the mains socket located on the
left side of your radio ensuring that the plug is pushed fully into the socket.
GB
2. Plug the other end of the mains lead into the wall socket and switch on the wall socket.
IMPORTANT: The mains plug is used as the means of connecting the radio to the mains supply.
The mains socket used for the radio must remain accessible during normal use.
In order to disconnect the radio from the mains completely, the mains plug should be removed
from the mains socket outlet completely.
3. When you apply power, the display on the radio will light up and say: 'SANGEAN'. The first
time that you use your radio (or after Factory Reset) the display will show “Setup wizard” and
“YES” will be highlighted on the screen. Press the Tuning Control Rotary to start the setup
wizard. The screen will ask if you wish to run the setup wizard again at the next start up. This
will lead to the main menu.
WELCOME TO
DIGITAL RADIO
4. Rotate the Tuning Control Rotary on the right hand side of the unit to highlight the desired
clock format (either 12 or 24 hour) then press the Tuning Control Rotary to enter your selection.
A menu allowing you to specify the auto update option for the clock will appear on the display.
The default of ‘Update from Network’ will be the best option for most users.
Setup wizard
Start now?
3,4
Date/Time
12/24 hour format
8
5. Rotate the Tuning Control Rotary to choose an auto-update option for the clock. This can
be updated from DAB or FM radio, from the Network, or not updated. The default is to auto
update from the network. If you choose any other option, go to step 8. Otherwise you will first
need to select the correct time zone and daylight savings setting, see steps 6 and 7. If you
choose “No update” you will need to set the clock manually later( see the section of ‘Manually
setting the clock’). Press the Tuning Control Rotary to confirm your choice.
Auto update
Update from DAB
Update from FM
Update from Network *
No update
Set timezone
6. Rotate the Tuning Control Rotary to highlight the time zone which is applicable to your
location. Press the Tuning Control Rotary to enter the setting.
5-9
7. You will then need to set the Daylight Savings option according to your location (Daylight
Savings is also known as Summer/Winter time ). Rotate the Tuning Control Rotary to
highlight “YES” to turn on daylight savings if required or ‘NO’ if you do not wish to use daylight
savings then press the Tuning Control Rotary to confirm the setting.
Most of Europe
8. You will then need to set 'Keep network connected.' By default, your radio will shut down its
WiFi connection when it is in standby. This minimizes power consumption but it does mean
that you will need to switch that radio on manually in order to use either the 'Play to' function
or any other remote control software. If you need to be able to remotely control the radio
even when it has been put into standby, then rotate the Tuning Control Rotary to highlight
'YES' to activate this function or 'NO' to deactivate this function. you can also choose to keep
the network connected by using the ‘Keep connected’ option in the network setting menu.
In the standby mode display either the WiFi signal indicator is shown with or without a cross
through it according to the chosen network settings.
9. The display will then show a list of WiFi regional options for the network set up. Rotate the
Tuning Control Rotary to highlight the required region and then press the Tuning Control
Rotary to select it. Your radio will then scan for available WiFi networks.
10. The radio will enter the Network Settings Wizard and will display ‘Scanning…’. After a short
while the display will show a list of the available WiFi networks.
Wlan region
UTC+00:00:Dublin,Lon
UTC+00:30:
UTC+01:00:Madrid,Arr...
UTC+01:30:
UTC+02:00:Athens,Ca...
Network settings
Keep network connected?
SSID
Smith
Jones
[Rescan]
[Manual config]
Network settings
Network wizard
Scanning...
11. You will first need to identify your network in the list of network names presented by the
Network Wizard. If no networks are found then you may have to get your wireless router
working (please see the instructions supplied with it) or you may be too far from the router.
When the radio finds your wireless network, it displays the Network Name (SSID) for the wireless access point on the screen. This is a name that is allocated to the access point in your
router by the person who set up the network – for example: ‘Jones family’ or ‘Paul’s network’.
If the router supports WiFi Proteced Setup, then ‘[WPS]’ will be shown in front of the SSID.
It is possible, and in some locations highly likely, that your radio will find more than one wireless network, in which case you should choose which one you need to connect to.
12. Rotate the Tuning Control Rotary to see the SSID for each wireless network that has been
found. If your network is shown proceed to step 14. If it is not shown then proceed to step 12.
If you make a mistake at any point, use the Back button to go back to the previous screen.
13. If your network is not found, it may be because the router is configured not to broadcast the
SSID. You should then use the Tuning Control Rotary to highlight and select the ‘[Manual
config]’ option in order to enter the network details manually. This is described in ‘Manual
Network Configuration”. If your network name is being broadcast, and it was not found, then
try re-scanning press the Back button), and if necessary try moving your radio to a location
closer to your access point / router.
14. When the SSID for the wireless network you wish to connect to is highlighted on the screen,
press the Tuning Control Rotary. If WiFi Pretected Setup (WPS) was indicated, you will see an
additional menu at this point, otherwise proceed to step 14. choose one of the WPS menu options
as required for your router (WPS may be via push button, or using an identification number).
‘Push Button’ – the display prompts you to press the WPS button on your router and then the
Select button on the radio. The two devices should then connect with the encryption key sent
automatically to the radio.
‘PIN’ – the display shows an identification number which you must enter into your router
using a web browser (refer to your router’s user documentation). You should then press the
Select button on the radio.
‘Skip WPS’ – if you wish to enter the encryption key yourself (or if it was previously Entered).
If you choose Push Button or PIN the screen will then show ‘Connecting…’ and then ‘Setup
wizard completed’. Press the Tuning Control Rotary to exit setup wizard.
SSID
11-13
Jones family
[WPS]Paul’s network
Smith
[Rescan]
[Wired]
GB
SSID
[WPS]Paul’s network
Smith
[Rescan]
[Wired]
[Manual config]
11,12
WPS Menu
Push Button
PIN
Skip WPS
>
>
>
Network settings
Please wait
Connecting...
10
15. If your network is configured without an encryption key, the screen should say ‘Connecting…’,
and then ‘Setup wizard completed’. Press the Tuning Control Rotary to exit the setup wizard and show the main menu. If this is the case then you have successfully connected your
radio to your network.
16. If the screen displays ‘Key’ , it is because the network is using one of the encryption systems:
Wired Equivalent Privacy (WEP) or WiFi Protected Access (WPA). You will need to enter the
correct WEP or WPA key into the radio to allow it to communicate with your wireless network.
If you do not have the WEP or WPA key, then you should obtain it from the person who set up
your network. Some wireless routers may come with an encryption key already set up by the
supplier, in which case you should refer to the documentation provided with it. WPA is used
here to also include WPA2. WEP keys are 10 or 26 characters long (using 0 – 9, and A – F).
Some wireless Routers can also use pass-phrases for WEP but these are not supported.
WPA keys are usually set up using a pass-phrase of between 8 and 63 characters. Your radio
accepts pass-phrases for WPA keys.
11
17. To enter the WEP or WPA key, characters are selected and entered using the Tuning
Control Rotary. The highlight scrolls through the available characters as well as the three
controls on the right. The character currently highlighted will be entered when you press the
Tuning Control Rotary. Do this as needed until the complete key has been entered. Remember, WEP keys only use the numbers 0-9 and letters A-F. WPA keys are sensitive to upper and lower case characters. You must enter the key exactly or the radio will not connect to
the network. The three controls on the right-hand side of the screen have special functions.
You can quickly access these by pressing the Info button and then use the Up or Down and
Select buttons as needed:
select ‘
’ to erase a character just entered
select ‘ ’ when the complete key has been entered
select ‘
’ to cancel an re-run the Network Wizard
If a WEP or WPA key has previously been entered for the selected SSID then the display will
show ‘Key: [Set]’. If you have previously entered a different key, you must clear this by selecting the ‘
’ symbol. This will remove the ‘[Set]’ indication.
After the final character of the WEP or WPA key has been entered, highlight the ‘ ’ symbol
and press the Tuning Control Rotary. Then screen will show ‘Connecting…’ and then ‘Setup
wizard completed’. Press the Tuning Control Rotary to exit setup wizard. The radio should
now be able to connect to the network.
Setup wizard
Setup wizard
completed
Press SELECT to exit
Main menu
Internet radio
Spotify
Music player
DAB
FM
Key:
Network settings
Network wizard
Scanning...
Setup wizard
Setup wizard
completed
Press SELECT to exit
18. Once you have connected your radio to the network (and therefore also to the Internet) it will
display the main menu. Press the Tuning Control Rotary to put the radio in Standby mode.
It should then display the time as obtained from the Internet. If the time display is not correct
for any reason, it can easily be adjusted later, see ‘Manually setting the clock’. If you have followed the steps on the preceding pages successfully, your radio will have connected to your
router, and then made a connection to the Internet and set its clock. If this is the case, then
you can try listening to radio stations via the Internet.
24/08/2010
15:37
GB
Note:
To save the radio power consumption while your radio is powered with battery, the radio will
turn off fully when put into standby mode. As a result, if you switch off your radio when it is
power supplied with battery, next time when your radio is switched on, the time on the screen
will be reset and show as ‘00:00’. However, as soon as the radio connects with WiFi, the time
will update automatically from the network.
12
Changing the network connection
In the sections above, you chose how your radio would be connected to your network, using a
WiFi connection. From time to time, you may find that you need to connect to different computer
networks. The Internet setup menu allows you to change your radio’s network settings, scan for
an alternative wireless network, or to manually configure the network parameters.
The steps outlined below describe how you can do this –see also the section ‘Network Profiles’.
Configuring the radio to use an alternative WiFi connection
From the Network settings menu select ‘Network wizard’. This will present you with details of any
WiFi networks that are found. Scroll down the list using the Tuning Control Rotary to the desired
network name. Press Tuning Control Rotary to select this network. The radio will then use its
WiFi system to communicate with the network. Depending on the settings for the new network
you may need to enter an encryption key. By default the radio will then acquire an IP address
and other network settings from your router using DHCP.
Internet radio
Last listened
Station list
System settings
Main menu
>
>
>
System settings
Brightness
Contrast
Equaliser
Network
Time/Date
>
>
>
Network settings
Network wizard
View settings
Wlan region
Manual settings
Network profile
Connection type
>
>
>
Wireless
1/9
>
DHCP
2/9
Manual network configuration
If you do not wish to use DHCP for automatic configuration, or if your network is configured with
a hidden SSID, then you will need to enter some network settings manually. (Note – a hidden
SSID may prevent casual observers from detecting your network, but is not recommended as a
means of network security.)
DHCP enable
DHCP disable
1. From the radio Network settings menu, select ‘Manual settings’. You must then choose to connect
using ‘Wireless’ connections. Entering this option, there are as many as nine settings screens,
shown by the ‘1 of 9’ progress marker in the top right corner of the display.
IP address
IP settings
192
1
25
255
0
Subnet mask
255
2. The next menu asks whether you wish to use DHCP to configure your network parameters
(IP address, subnet mask, gateway address, etc). Unless you are familiar with networking and
related terminology, we recommend that you allow the use of DHCP. Choose ‘DHCP enable’
unless you need to specify the network details manually.
If you chose ‘DHCP enable’, please skip to step 6 in order to set up the wireless connection details.
If you chose ‘DHCP disable’ for either connection method, the next step is to set up the IP address.
13
3/9
168
255
Gateway address
4/9
Grteway address
192
168
1
1
3. The manually specified IP address should be chosen to be compatible with the settings in your
router and must be a unique address on your network. If you are using DHCP for some devices and static (manually configured) IP addresses for others, the IP address used should fall
outside the range that the router may allocate using DHCP. Typically, the first three groups
of digits will be the same for all devices on your network. To enter the IP address, rotate the
Tuning Control Rotary to set the value for each group of digits and then press the Tuning
Control Rotary to enter the value and to move on to the next group. When the IP address has
been entered, the subnet mask should be entered. The subnet mask defines which parts of
the IP address are common across your network. For most small networks the subnet mask
will be 255.255.255.0 and this is entered in the same way.
DNS
5/9
Primary DNS
192
168
1
1
0
0
Secondary DNS
0
0
SSID
6/9
Authentication
7/9
GB
4. The Gateway address is normally the IP address of the router through which the radio
connects to the internet and is entered in the same way as the previous addresses.
5. In most installations the DNS settings (DNS = Domain Name Server) will be set to the same IP
address as your router. In this case the secondary DNS may be left at zero. To enter the DNS
address, rotate the Tuning Control Rotary to set the value for each group of digits and then
press the Tuning Control Rotary to enter the value and to move on to the next group. Repeat
this until all eight groups of digits have been entered.
6. The next step is to set up the WiFi connection, starting with the name of the wireless network
(SSID) followed by the encryption options and password. To enter the SSID, characters are
selected and entered using the Tuning Control Rotary The radio scrolls through the available
characters as well as the three controls on the right. The character currently highlighted will
be entered when you press the Tuning Control Rotary. Do this as needed until the complete
network name has been entered. The SSID setting is sensitive to upper and lower case characters and symbols.
You must enter it exactly as set up in your router. The three controls on the right-hand side of
the screen have special functions:
select ‘
’ to erase a character just entered
select ‘ ’ when the complete SSID has been entered
select ‘
’ to cancel and go back to the DNS settings screen
7. Having entered the SSID, you must enter details of the encryption system used on your wireless network. This should be the same as specified in your router settings. If your network
does not use encryption, then select the ‘Open’ option. Your radio should then connect to the
network, so skip to step 11. If your network uses WEP (Wired Equivalent Privacy) select the
‘Pre-Shared Key’ option then go to step 8. The remaining options are for WPA or WPA2 (WiFi
Protected Access) – see step 9.
Open
Pre-Shared Key
WPA
WPA2
Encryption type
8/9
Disabled
WEP
Key:
9/9
14
8. If you chose ‘Pre-Shared Key’ in step 7, you should then choose the WEP option. The key
should be entered using only the numbers 0-9 and the letters A-F. The key will be 10 characters long for 64-bit encryption and 26 characters long for 128-bit encryption. The radio will
accept lower-case letters a-f as equivalent to upper-case A-F. Spaces or special symbols are
not permitted in WEP keys.
The three controls on the right-hand side of the screen have special functions:
select ‘
’ to erase a character just entered (long press to clear); Info again to continue
select ‘ ’ when the complete encryption key has been entered
select ‘
’ to cancel and go back to the SSID settings screen
Once the key is entered the radio should connect to your network. Please skip to step 11.
9. WPA and WPA2 are similar, although WPA2 offers a higher level of security. Whichever
you selected in step 7, you then have to specify the variant used. They are TKIP (Temporal
Key Integrity Protocol) and AES (Advanced Encryption Standard). As previously, the setting
should match that used by your router. Some routers allow both to be specified, and the router will use whichever variant is supported by the connected device. AES is regarded as the
more secure option if it is available.
10. The radio will then require you to enter the encryption key. This must be a string of between 8
and 63 characters and must be identical to the key which has been entered into your router.
Note – the encryption key is sensitive to the use of upper and lower case letters and symbols.
Take care to enter the key exactly, or the radio will not be able to connect to your router. The
three controls on the right-hand side of the screen have special functions. You can access
these by rotating the Tuning Control Rotary and then press the Tuning Control Rotary to
select as you needed:
select ‘
’ to erase a character just entered (long press to clear ); Info again to continue
select ‘ ’ when the complete encryption key has been entered
select ‘
’ to cancel and go back to the TKIP / AES options screen
Once the key is entered the radio should connect to the network.
11. While the radio is trying to connect to the network, it will display ‘Processing…’ when checking the encryption key and then ‘Connecting…’. If the connection is made successfully, the
radio will return to the Network settings menu. If the unit cannot connect, then it will display a
‘Failed to connect’ message and will return to the SSID entry screen (step 6). Once connected, the network settings are stored in the radio. The settings are retained when the radio is
disconnected from the mains. You may now use the Back and Mode buttons to access the
functions of your radio.
15
Authentication
7/9
Open
Pre-Shared Key
WPA
WPA2
Encryption type
8/9
TKIP
AES
Key:
9/9
Network settings
Please wait
Connecting...
Network settings
Network wizard
View settings
Wlan region
Manual settings
Network profile
>
>
Network remote control options
Network Pin setup (Pin number)
Your radio has the option of being controlled by an application installed on an Apple iPhone, iPod
touch or iPod. The Pin number facility allows you to ensure that your radio can only be controlled by
your own Apple device rather than someone else’s.
Details of how this feature can be used with your iPhone or iPod touch are explained in a separate
sheet called 'The App for controlling your Sangean internet radio'.
Network settings
Wlan region
>
Manual settings
NetRemote PIN Setup
Network profile
>
Keep network connected
GB
16
Internet Radio
Internet Radio – the basics
Before you can use your radio to listen to broadcasts via the Internet, it is necessary to have
connected it to your computer network using the wireless (WiFi) connection.
There are literally many thousands of radio broadcasts available via the internet as well ‘Podcasts’.
Your radio provides several ways of searching for broadcasts in order to make finding and
choosing them easier. Once you have found radio stations which you like, you may either store
them as presets within the radio, or add them to a list of your favorite stations which your radio
can access. The number of presets is limited (there are five presets in the radio), but you can
store as many favorites as you like.
You may search for an internet radio station by Location. If you know the name of the station and
the country from which a station is broadcast this may be the easiest method to find a station. It
is also a great way to experience radio from other parts of the world.
You may also search for an internet radio station by Genre. If you prefer a particular type of
music, Blues for example, you may search for a radio station that broadcasts that type of music,
and you can choose from a list of Blues radio stations regardless of location, or taking location
into account.
If you know part of the name of an internet radio station, you can enter it into the radio and it will
search for stations that match that name. This can be helpful if you are unsure of the location or
genre of a particular station.
The WFR-29C radio connects to a radio station database which serves many users in many
countries. This means that there is a very wide range of program content available. You can also
search for stations which have been recently added to those available (new stations) or you can
search for the most popular.
17
Selecting a radio station by location
1. Press the Standby button to switch the radio on. Then press the Mode button and rotate the
Tuning Control Rotary to highlight the internet radio mode display. Press the Tuning Control
Rotary to select the option.
Internet radio
1
2. Press the Menu button to enter the main Internet radio menu. Rotate the Tuning Control
Rotary until ‘Station list’ is highlighted on the display and then press the Tuning Control
Rotary to select the option.
5. Rotate the Tuning Control Rotary to scroll through the list of continents. When the desired
continent is highlighted press the Tuning Control Rotary to enter your selection.
6. The display will show a list of countries within the chosen continent. If there are many
countries shown you can scroll through the list continually in either direction. For example, if
the chosen continent was Europe, then to find the United Kingdom scroll up from the top of the
list to the bottom by rotating the Tuning Control Rotary. Press the Tuning Control Rotary to
choose the desired country.
7. You will typically find that you then have the option to select either ‘All Stations’ or one of
a number of categories. The lists are always sorted alphabetically, and long lists will wrap
around from top to bottom or bottom to top.
>
>
>
GB
Internet radio
3. Rotate the Tuning Control Rotary until ‘Stations’ is highlighted on the display and then press
the Tuning Control Rotary. Note that the menu may offer one or more local selections based
upon the country in which the unit is being used, according to your internet IP address (‘United
Kingdom’and ‘BBC’ stations, for example).
4. Rotate the Tuning Control Rotary until ‘Location’ is highlighted on the display and then press
the Tuning Control Rotary to select.
Last listened
Station list
System settings
Main menu
My Favourites
Local United Kingdom
BBC
Stations
Podcasts
2
>
>
>
>
>
Stations
Location
Genre
Search stations
Popular stations
New stations
3-6
Location
Africa
Asia
Caribbean
Central America
Europe
>
>
Europs
>
>
>
>
>
Switzerland
Turkey
Ukraine
United Kingdom
Vatican
>
>
>
>
>
Asian sound radio
Aston FM
Atlantic FM
Audio Book Radio
BBC Radio 1
United Kingdom
All stations
Highlighted stations
Alternative
Ambient
Celtic
>
>
>
>
>
>
>
All Stations
18
8. Rotate the Tuning Control Rotary to highlight your chosen radio station and then press the
Tuning Control Rotary to enter your selection. The display will show ‘Connecting…’ while the
radio connects to the new station. The station should then start playing. Adjust the volume as
needed.
9. If the station has on-demand content, that is, it gives the option of listening to programs which
have already been broadcast or to Podcasts, there will be an additional screen showing the
radio station name as well as a ‘Podcasts’ option. These are selected using additional menus,
determined by the radio station and the content. There may simply be a list of programs, or
there may also be options to choose from broadcasts on particular dates or days of the week.
The examples shown here are typical. Podcasts and Listen Again content can also be accessed
separately from the main Internet Radio menu.
If your radio cannot connect to a radio station
Note:
If your radio is unable to connect to an internet radio station it will generally either display ‘Network
Error’ or ‘Stopped’. This can be for many reasons, but typically will be due to one of the following:
●
●
●
●
The radio station may not be broadcasting at the present time.
The radio station may not be able to accommodate any more connections from internet listeners.
The broadcaster may limit listening to specific countries or regions.
There may be network congestion (either locally or at a distance) which is affecting the reliability
of the connection.
If your radio can connect, but the audio is not continuous and the radio keeps having to
reconnect, this may be due to the radio station only having limited connection capacity.
19
BBC Radio 1
BBC Radio 1
Podcasts
>
BBC Radio 1
BBC Radio 1
Podcasts
>
Podcasts
>
>
>
>
>
Dick and Dom
Eddie Halliwell
Edith Bowman
Fearne and Reggies
Gilles Peterson
Edith Bowman
28/08/2009 - August 28
27/08/2009 - August 27
26/08/2009 - August 26
25/08/2009 - August 25
Internet radio
12:34
Edith Bowman
Show description
Edith Kickstarts your
afternoon with music,
Selecting a radio station by genre
Internet radio
1. Press the Menu button to enter the main Internet radio menu.
2. Rotate the Tuning Control Rotary until ‘Stations’ is highlighted on the display and then press
the Tuning Control Rotary to select.
1
3. Rotate the Tuning Control Rotary until ‘Genre’ is highlighted on the display and then press
the Tuning Control Rotary.
4. Rotate the Tuning Control Rotary to scroll through the list of content types. This menu is
normally cyclic – you can scroll the list continually in either direction. When the chosen genre
is highlighted, press the Tuning Control Rotary.
5. You then have the choice of ‘All Stations’ of the chosen genre, or a list of countries. Note if
a country is not shown then the station may still appear in the ‘All Stations’ list. Rotate the
Tuning Control Rotary and the Tuning Control Rotary to choose as needed.
6. A list of radio stations is then shown. Rotate the Tuning Control Rotary until the desired
station name is highlighted on the display.
7. Press the Tuning Control Rotary to select the station. The display will show ‘Connecting…’
while it finds the new station. If the radio is unable to connect this may be for one of the
reasons explained previously.
8. Adjust the Volume as needed to set the listening level.
My Favourites
Local United Kingdom
BBC
Stations
Podcasts
>
>
>
>
>
GB
Stations
2-7
Location
Genre
Search stations
Popular stations
New stations
>
>
>
>
Genre
Alternative
Ambient
Big Band
Bluegrass
Blues
>
>
>
>
>
Blues
All Stations
Highlighted Stations
Belgium
France
Germany
>
>
>
>
>
All Stations
Asian sound radio
Aston FM
Atlantic FM
Audio Book Radio
BBC Radio 1
20
Searching for a radio station by name
There may be occasions when you know the name of a radio station but you do not know the
location or genre. This facility allows you to search for the station using a part (or parts) of the
radio station name.
1. Press the Menu button to enter the main Internet radio menu. Rotate the Tuning Control Rotary
until ‘Station list’ is highlighted on the display and then press the Tuning Control Rotary.
Internet radio
1
>
>
>
Internet radio
2. Rotate the Tuning Control Rotary until ‘Stations’ is highlighted on the display and then press
the Tuning Control Rotary.
3. Rotate the Tuning Control Rotary until ‘Search stations’ is highlighted on the display and then
press the Tuning Control Rotary.
Last listened
Station list
System settings
Main menu
4
My Favourites
Local United Kingdom
BBC
Stations
Podcasts
>
>
>
>
>
Stations
4. To enter the search word(s) press the Tuning Control Rotary on the remote control to highlight
each character for the search in turn, and press the Tuning Control Rotary to enter. If you
make an error press the Info button to access the delete character ‘
’ on the screen and the
character selection. After the final character of the search has been entered, use the Info button
and then the Tuning Control Rotary to highlight the ‘ ’ symbol on the screen and then press
the Tuning Control Rotary to finish.
5. The radio will search for radio stations that match your search data. If you include a space
between two search items the radio will look for station names which include both items. Thus
a search for ‘ROCK 100’ could find a station called ‘100 Classic Rock Hits’ as well as a station
called ‘100.FM Rocks’.
6. Rotate the Tuning Control Rotary to highlight the station that you wish to listen to and press
the Tuning Control Rotary to confirm your choice. The display will show ‘Connecting…’ while it
finds a new station.
21
Location
Genre
Search stations
Popular stations
New stations
1-6
>
>
>
>
Stations
Search stations
Radio10 - Top 100 Classic
Rock 100 DIZ
Selecting a new or popular station
As described in the section ‘Internet Radio – the basics’, your radio connects via the the Internet
to a database of radio stations. This option is provided to highlight stations which are newly
added to the list of those available, or stations which are particularly popular with listeners
around the world. Your radio allows you to easily choose stations from these two categories,
using menus very similar to those used when finding stations by location and genre.
GB
1. Press the Menu button to enter the main Internet radio menu. Rotate the Tuning Control Rotary
until ‘Station list’ is highlighted on the display and then press the Tuning Control Rotary.
2. Rotate the Tuning Control Rotary until ‘Stations’ is highlighted on the display and then press
the Tuning Control Rotary.
Internet radio
1
>
>
>
Internet radio
3. Rotate the Tuning Control Rotary until ‘Popular stations’ or ‘New stations’ is highlighted on the
display. Press the Tuning Control Rotary to enter your choice.
4. Rotate the Tuning Control Rotary to highlight the station that you wish to listen to and then
press the Tuning Control Rotary to enter your choice. The display will show ‘Connecting…’
while the new station is found.
Last listened
Station list
System settings
Main menu
1-4
My Favourites
Local United Kingdom
BBC
Stations
Podcasts
>
>
>
>
>
Stations
Location
Genre
Search stations
Popular stations
New stations
>
>
>
>
Stations
BBC Radio 4
ENERGY ZURICH
All Irish Radio
Classic FM
RTL 2
22
Selecting a podcast / BBC Listen Again
Some radio stations allow you to listen to programs that have already been broadcast. The BBC’
s Listen Again service is an example of this. In addition, radio broadcasters and individuals may
make programs which are intended normally to be downloaded into a computer or copied onto a
portable media player. These are commonly known as Podcasts.
Internet radio
1
Last listened
Station list
System settings
Main menu
1-4
My Favourites
Local United Kingdom
BBC
Stations
Podcasts
On your radio, both Listen Again programs and Podcasts are grouped together as Podcasts,
and the same menu is used to access and listen to both types of programming. Listen Again
programs are also accessible via the Stations menu.
1. Press the Menu button to enter the main Internet radio menu. Rotate the Tuning Control Rotary
until ‘Station list’ is highlighted on the display and then press the Tuning Control Rotary.
2. Rotate the Tuning Control Rotary until ‘Podcasts’ is highlighted on the display and press the
Tuning Control Rotary.
3. You may then search by location, genre, or using part of the name of the podcast. The searches
operate in exactly the same way as when searching for a conventional radio station. Searching
by location is done first by continent, then by country. You may then list ‘All shows’ or search
within a country by genre. Searching by genre is more direct, since once the genre is chosen
the next menu display shows a list of available podcasts. Searching by name operates in the
same way as when searching for a named radio station, selecting the ‘ ’ symbol when you
have entered the text. You may enter one or more pieces of text which will be used for the
search.
4. Rotate the Tuning Control Rotary and then press the Tuning Control Rotary to confirm your
chosen podcast. The display will show ‘Connecting…’ while it finds the new program.
23
>
>
>
Internet radio
>
>
>
>
>
Stations
Location
Genre
Search stations
>
>
Podcasts
Podcasts
Dick and Dom
Eddie Halliwell
Edith Bowman
Fearne and Reggies
Gilles Peterson
>
>
>
>
>
Presetting stations
With so many Internet radio stations available, it is desirable to have a means of rapidly selecting
the stations that you listen to most frequently. Your radio has five memory presets which can
easily be set to store the details of any Internet radio station. The radio station presets are
retained in memory even when the radio is switched off. Please see also the section ‘Last
Listened’ and ‘Configuring My Favorite Stations’.
GB
Storing a preset
1. Press the Standby button to switch on your radio. Tune to the required station using one of
the methods described on the preceding pages.
2. To store the currently playing radio station as a preset, press and hold the required Preset
button (1 – 5) on the panel until the display shows ‘Preset stored’. The station will be stored
using the chosen preset button. Repeat this procedure as needed for the remaining presets.
Preset stored
1
3. Stations which are already stored in the presets may be over-written by following the above
procedure.
2
Recalling a preset
Internet radio
12:34
Aural Moon
Description:
Playing progressive rock
old and new
1. Press the Standby button to switch on your radio. Select the Internet radio mode using the
Mode button.
2. Momentarily press the required Preset button on the remote control. Your radio will then connect
to the station stored in preset memory. The preset used will be shown at the bottom of the
1
UPnP
display screen.
2
24
Last Listened
It is often helpful to be able to go back to a station that you have already listened to. Your radio has
a ‘Last Listened’ feature which provides you with quick access to the ten most recently listened to
radio stations or podcasts. As each new radio station is listened to the oldest item is deleted from
the list. The Last Listened list is stored when the radio is disconnected from the mains.
1. With the radio switched on and in Internet radio mode, press the Menu button. The first item on
the menu is ‘Last listened’. With this item highlighted press the Tuning Control Rotary.
Internet radio
Last listened
Station list
System settings
Main menu
2. The display will then show a list of the last ten Internet radio stations or podcasts. Rotate the
Tuning Control Rotary to highlight whichever you wish to listen to and then press the Tuning
Control Rotary to cause your radio to reconnect to that radio station or podcast.
Last listened
1
1,2
25
>
>
>
Absolute Radio
eurosmoothjazz
Rock Antenne
Radio Luxembourg
EldoRadio
Internet radio
12:34
Radio Luxembourg
Description:
Radio Luxembourg, the
best in classic rock.
Display modes
Your radio has a range of display options when in Internet Radio mode. Note that not all
information may be available for all Internet radio stations.
1. Press the Info button to cycle through the different options.
a. Description
Displays information about the radio station or scrolling text messages
such as artist/track name, phone number etc.
b. Genre
Displays program type information e.g. Pop, Classic, News, etc. and the
location of the current radio station.
c. Reliability
Displays the reliability of the data stream from the station currently being
received.
d. Format
Displays the bit rate and format of the station being received.
e. Playback buffer
Displays status when connecting to and playing a radio station. This
indicates the reliability of the data stream to your radio. If there are no
bars shown to the right of the dividing line then the data stream reliability
may be poor and you may find that there are many breaks in the audio (this
is not always the case for REAL audio streams).
f . Date
Internet radio
16:01
Final Fantasy Radio
GB
Reliability:
Excellent
1
Internet radio
16:01
Final Fantasy Radio
Bit rate: 40 kbps
Codec: MP3
Sampling Rate:
22.0 kHz
Internet radio
16:01
Final Fantasy Radio
Playback buffer
Displays the current date.
Additional or alternative information may be displayed when listening to Podcasts, Categories
displayable can include…
Episode name
Show genre
Episode URL
Codec
Internet radio
16:01
Final Fantasy Radio
Today’s Date:
28/03/2014
Show description
Show language
Bit rate
Sampling rate
Whenever the radio is displaying an information screen (as opposed to a menu screen), the time
is displayed in the top-right corner of the display, and a WiFi strength indicator is shown in the
bottom-right corner.
26
Customizing your radio
In addition to storing your favourite radio stations in the radio presets, your radio allows you to
create customised lists of stations which can appear in two special menus on the radio called
'My Favourites' and 'My Added Stations'. Your radio uses a database which is accessed via the
Internet in order to find out which radio stations are available and how it should connect to them.
You are able to add your personal selections to this database. These will only be accessible
by you using your PC or your radio. You can choose the stations which will appear in the 'My
Favourites' menu from the large selection already listed. Additionally, if you find a radio station
that is not listed then you may also add the Internet address (URL) of the station's audio stream
to your selection. It will then appear on your radio via the 'My Added Stations' menu item.
Registering an account
1. Open the web site http://www.wifiradio-frontier.com using the Internet browser on your computer.
Click on the ‘Register here’ link and follow the on-screen instructions to register an account.
During the registration process the web site asks for an access code. This allows it to uniquely
identify your internet radio from the many others that it also provides data for. To obtain the
access code, please followthese steps.
2. With your radio switched on and in Internet radio mode, press the Menu button, then select
'Station list' using the Tuning Control Rotary.
3. Scroll down the Station list menu to the item called 'Help'. Press the Tuning Control Rotary to
enter the Help menu.
4. In the Help menu, select the menu item ‘Get access code.’ Provided that the radio is connected
to the Internet, a code will be displayed of typically seven characters (Upper case letters and
numbers). Make a note of this code for the next step. If you need to re-register late you must
repeat this process to get a fresh access code.
5. You should then use the code displayed by the radio to fill in the Access Code field on the web
page when you set up your account. Once you have your account set up, if you have other
radios which use the same data base, you may also add them to your account. You will need
to get an access code from each radio in order to add it to the account. They may then share
your favorite and added radio station details.
27
Internet radio
Last listened
Station list
System settings
Main menu
Internet radio
>
>
>
BBC
Stations
Podcasts
My Added stations
Help
>
>
Access code
123ABCD
Help
Get access code
FAQ
Get access code
>
>
>
>
>
Configuring My Favorite Stations
Configuring My Added Stations
1. Using the website at http://www.wifiradio-frontier.com it is possible to
search among the many radio stations that are available by location,
genre, or language. You may also choose from new or popular
stations.
1. If you wish to listen to a radio which is not a currently held in the
database at http://www.wifiradio-frontier.com, it is possible to add the
details yourself. You will need to obtain the internet address (URL)
for the audio system for the station that you wish to add. This may
be information provided by the radio station itself, via its website, or
perhaps passed to you from another listener.
2. When the radio stations that you have found are shown on your
computer screen, they are shown with a 'Play' icon and an 'Add to
favourites' icon (the plus symbol and heart). Clicking on the 'Play'
icon will allow you to hear the radio station via your computer.
Clicking on the 'Add to favourites' icon will cause the radio station to
be added to the list accessible via your radio.
3. To help you organise your favourites, and since you may have a
many after a while, the website will allow you to specify the name
for a category or group under which the radio station will be listed
on your radio. Suitable names might be 'Rock', 'Smooth', 'Mum's
stations', and so on. Whenever you add another radio station to your
favourites you can either add it to an existing. 4. Once you have Internet radio stations available in your ‘My Favorite
Stations’ list, you may play these stations from your radio. These
stations will be available on your radio from the Internet radio menu
item 'My Favourites'.
5. To look at, modify or delete your favourite stations lists on the
website, use the link 'My favourites' in the 'My account' area. To
delete a favourite radio station, click on the icon with a heart and
minus symbol.
2. Use the ‘My added stations’ link in the ‘My account’ area on the
website. This allows you to add details of new stations or to modify
those already added. You can provide a name for the radio station
which will be shown on your radio. You must also provide the web
address, location and format details.
3. Once you have Internet radio stations available in your ‘My Added
Stations’ list, you may play these stations from your radio. These will
be available on your radio from the Internet radio menu item called ‘My
added Stations.’
4. It is possible to add the web addresses for audio streams which may
not be playable by your radio. If you attempt to play such a stream,
your radio will normally display an error message of some kind. The
Sangean WFR-29C can only play MP3, WMA, AAC and Real Audio
internet radio streams.
5. To look at, modify or delete your added stations list on the website,
use the link ‘My added stations’ in the ‘My account’ area. To delete an
added radio station, click on the icon with a heart and minus symbol.
28
GB
Selecting your favorite stations
1. Press the Menu button to enter the main Internet radio menu.
2. Press the Tuning Control Rotary until 'Station list' is highlighted on the display. Press the
Tuning Control Rotary to enter the menu.
Internet radio
1
3. Rotate the Tuning Control Rotary until 'My Favourites' is highlighted on the display. Press
the Tuning Control Rotary and your favorite stations list will appear on the display (set up as
described on the preceding page).
4. Press the Tuning Control Rotary to highlight the required station and then press Tuning
Control Rotary to confirm your selection. The display will show 'Connecting...' while it finds
the new station. If the station has on-demand content (that is, it gives the option of listening
to programs which have already been broadcast), 'Selecting a podcast / BBC Listen again'.
Should you be unable to connect to a particular station, please note that some radio stations
do not broadcast 24 hours per day, and some stations are not always on-line.
Last listened
Station list
System settings
Main menu
Internet radio
My Favourites
Local United Kingdom
BBC
Stations
Podcasts
2-4
>
>
>
>
>
My Favourites
Smith fav
Smith fav
BBC Radio 2
BBC Radio 7
Bluegrass radio
Heart
Radio Luxembourg
29
>
>
>
>
Selecting your added stations
1. Press the Menu button to enter the main Internet radio menu. Rotate the Tuning Control Rotary
until 'Station list' is highlighted on the display and then press the Tuning Control Rotary to
select.
Internet radio
1
2. Rotate the Tuning Control Rotary until 'My Added Stations' is highlighted on the display and
then press the Tuning Control Rotary to select.
3. Rotate the Tuning Control Rotary to highlight the required station and then press the Tuning
Control Rotary to confirm your selection. The display will show 'Connecting...' while it finds
the new station. Should you be unable to connect to a particular station, please note that some
radio stations do not broadcast 24 hours per day, and some stations are not always on-line.
In addition, as mentioned in the previous section, it is possible to specify audio streams for
'My added stations' which are not compatible with your radio. In this event the station will not
be playable. The Sangean WFR-29C can only play MP3, WMA, AAC and Real Audio internet
radio streams.
Last listened
Station list
System settings
Main menu
>
>
>
GB
Internet radio
BCC
Stations
Podcasts
My Added stations
Help
>
>
>
>
>
1-3
My Added stations
Aardvark Radio
Brooklands FM
Huntingdon Community Ra
Note that the audio coding formats listed are generic terms. There are many variations of each
format, as well a variety of streaming protocols in use by different radio broadcasters. Your radio
has been designed to play the vast majority of coding and streaming formats in current use by
broadcasters.
30
Music player
Use with Windows, Apple Mac and Linux
The Music Player allows you to play audio files which are stored on
computer in your network.
In order to play files from a computer on your network, your radio must
connect to a file server application which uses the Universal Plug
and Play (UPnP) protocol. If your computer uses Windows 7, Vista
or XP, then it is likely that your computer already has a UPnP server
application available. Windows Media Player (versions 11 and 12) has
this capability, and it is able to make your files available to your radio. It
also allows you to select files by Album, Artist, and so on.
Windows Media Player 12 can serve MP3, WMA, AAC and WAV files
to your radio. Windows Media Player 11 is only able to serve MP3 and
WMA files to your radio. If you are an Apple Mac or Linux user, there
are other UPnP server applications which you may use with your radio.
The Music Player on the radio can playback audio files in MP3, WMA,
AAC and WAV formats. WMA Lossless files can also be played when
using Windows Media Player as it will convert these to a compatible
format before streaming them to the radio. Note that the playback of
files encoded using WMA Voice, WMA 10 Professional, and for files
which have DRM protection are not supported.
Windows Media Player is less flexible than some other UPnP servers,
but is generally easier to set up. It is supplied as a standard component
of windows 7, Vista or XP.
Many UPnP server applications are also capable of sharing pictures
and video files to other network connected devices. if this is the case (as
it is with Windows Media Player 11 and 12) you may see the option of
choosing between ‘Music’, ‘Video’ and ‘Pictures’ on the Music Player’s
Menu. You should only select the ‘Music’ option. Content offered via the
alternative options will not be playable on your radio.
Some third part server application allow customization of the search
criteria and indexing methods. This can useful of you have a very large
collection of store music files.
Here is a short selection of alternative UPnP server applications,
although many other are available.
Twonky Media Server (Windows, Apple Mac, Linux)
TVersity (Windows)
Elgato EyeConnect (for Apple Mac OS X)
Media Tomb (Linux, MAC OS X)
When using a UPnP server, the search and selection criteria are determined
Please refer to the documentation for your chosen server application for
by the server software, but typically include Artist, Album and Genre. Many
server applications also allow you to access your files according to the
folders within which they are stored as well as other criteria.
full details of its configuration and usage.
31
Accessing your audio files via a UPnP server
If your computer is running Windows 7, then Windows Media Player version 12 includes a UPnP
server which will make your files available to your radio.
If you have Windows Vista or XP (Please refer to the section of ‘Accessing your audio files via
a UPnP server using Windows Vista and XP’). There are other UPnP server solutions available
for non-Windows users and for Windows users who may wish to use an alternative (see the
preceding section).It is beyond the scope of this instruction book to cover all possible options for
UPnP. We explain the use of Microsoft's Windows Media Player here since that will be the first
choice for the majority of users.
GB
Set up UPnP access with Windows Media Player 12
1. Windows Media Player 12 (referred to here as WMP 12) can create a library from all the media
files available on your PC. To add new media files to the library, select 'Library', then 'Music',
then 'All music' or 'Artist', 'Album' etc. This will show you the current library contents. You may
then simply drag and drop files from other locations into the library. Alternatively, with media
files or folders on the screen, you may right-click on the file or folder and select 'Include in
library' and then select 'Music'. In this way you can quickly add additional content to your music
library.
2. In WMP 12, click on 'Stream' (see picture at right) and then select 'Automatically allow devices
to play my media'. Then accept the 'Automatically allow all computer and media devices' option.
There are other options (see overleaf) but this is the simplest if you just wish to quickly enable
media streaming to your radio.
3. Press the Standby button to switch the unit on. Then press the Mode button and rotate the
Tuning Control Rotary as needed until the Music Player mode display is shown. Then press
the Tuning Control Rotary. The main 'Music Player' menu will then be displayed.
3
3
32
4. Rotate the Tuning Control Rotary until 'Shared media' is highlighted and press the Tuning
Control Rotary to select. The radio will scan for all available UPnP servers. It may take a few
seconds for the radio to complete its scan. The radio will display '<Empty>' if no UPnP servers
are found.
5. After scanning, select your UPnP server using the Tuning Control Rotary on the panel. If you
allowed automatic connection previously, your radio should now connect and you may skip
to the next page. If you did not permit automatic connections, your radio will then normally
display 'Unauthorized' at this stage.
6. Your PC may prompt you that there has been a connection to your UPnP server. Whether
prompted or not, in order that the radio may access the music files, you will need to click the
'Library' tab in WMP 12 and select the 'Stream...' item to open the 'Media Streaming' window.
Select 'Automatically allow devices to play my media' then select 'Automatically allow all
computer and media devices'. Alternatively select 'More Streaming options' to enable sharing
on a 'per device' basis.
7. In the 'More streaming options' window, the radio will be listed as a blocked device. Click on
the button shown to select 'Allowed'.
Note:
If you are using Microsoft Windows' firewall software, this should be correctly configured by
WMP 12. If you are using third party firewall software you may need to manually configure it to
allow your unit and WMP 12 to communicate.
8. On the radio, select the named server again using the Tuning Control Rotary. If WMP 12
is now able to communicate with your radio you will be presented with some media selection
options on the display.
33
Music player
Shared media
My playlist
Clear My playlist
System settings
Main menu
4-8
>
>
>
>
>
Shared media
JENNY: Jenny’s music
HOME_PC: Mum’s music
>
>
Locating and playing media files using UPnP
Once the UPnP server has been configured to share media files with your radio, you may select
the files that you wish to play as follows:1. Press the Standby button to switch on the unit. Press the Mode button and rotate the Tuning
Control Rotary as needed until the Music Player mode display is shown. Then press the
Tuning Control Rotary. The main Music Player menu will then be displayed.
2. Rotate the Tuning Control Rotary until 'Shared media' is highlighted on the display and then
press the Tuning Control Rotary to cause the radio to scan for UPnP servers. Note that it may
take a few seconds for the radio to complete its scan. The display will return to the Music Player
menu if no UPnP servers are found.
1
Music player
1
3. After a successful scan, rotate the Tuning Control Rotary to highlight your UPnP server and
then press the Tuning Control Rotary. If the display shows multiple media types, select 'Music'.
(Some UPnP servers can serve pictures and video content to suitable devices.)
4. The radio will now list the media categories which are made available by the UPnP server - for
example, 'Album', 'Artist' and 'Genre'. Rotate the Tuning Control Rotary to highlight which
category you wish to browse, then press the Tuning Control Rotary to confirm your choice.
If you wish to use the search function rotate the Tuning Control Rotary until 'Search' is selected
on the display. You may select characters to build a keyword for searching for content to play.
When you first set up sharing with a UPnP server, not all of your files will be available immediately.
The UPnP server must look inside each file to identify the artist and album information from
'tags' embedded in them.
The server may also need time to access the Internet to obtain additional information such as
'album art' which it can display when you examine your music library on your PC. For a library
of many files this can take some time.
GB
Shared media
My playlist
Clear My playlist
System settings
Main menu
>
>
>
>
>
Shared media
JENNY: Jenny’s music
HOME_PC: Mum’s music
>
>
2-4
JENNY: Jenny’s music
Music
Video
Pictures
Playlists
>
>
>
>
Music
All music
Genre
All Artists
Contributing Artists
Album Artists
>
>
>
>
>
34
Media selection
When searching via UPnP you will have a selection of search criteria as determined by the UPnP
server software on your computer. This allows you to search by a given information type (Album,
Artist, Genre, etc.) and then to narrow the search to an album or to a particular track within an
album. Some UPnP server applications allow the search options to be customized. The searches
described here are just examples of the possibilities.
JENNY: Jenny’s music
Listening to a complete album
Music
3. With the first track in the album indicated, press the Tuning Control Rotary. The album will
then begin playing.
While the radio is playing from your media library, you may use the menus as described above
to choose a different selection. When you select the track from which to play, the radio will then
immediately begin playing the new selection.
>
>
>
>
>
All music
Genre
All Artists
Contributing Artists
Album Artists
1. Rotate the Tuning Control Rotary to choose content by Artist, Album, Genre, etc. according
to your needs then press the Tuning Control Rotary to enter your choice.
2. When you reach the album or folder the menu will then switch to showing the tracks in that
album or folder. When searching by UPnP they will normally be listed in track number order (but
as with the search criteria, this can vary according to the server application used).
>
>
>
>
Music
Video
Pictures
Playlists
Music
1-3
The Beatles
Beautiful South
Beethoven
Cat Stevens
Cream
>
>
>
>
>
The Beatles
The Beatles - 1
Abbey Road
Help!
Rubber Sour
Sgt. Peppers Lonely Hea
>
>
>
>
>
The Beatles 1
Love Me Do
>
From Me to You
>
She Loves You
>
I Want to Hold Your Han >
Can’t Buy Me Love
>
35
Listening to a particular track
1. If you wish to play only a particular track from an album or folder, first choose the album or
folder as described on the preceding pages.
2. Rotate the Tuning Control Rotary until the required track is highlighted.
3. Press and release the Tuning Control Rotary. The track will begin playing. The radio will then
play subsequent tracks from the same album or folder.
Controlling playback
1. Press the Play/Pause button to pause playback of the current track.
2. If you press the Play/Pause button, playback will resume from the point where it was paused.
3. Press the Rewind button to start playback of the previous track in the list.
4. Press the Fast-forward button to start playback of the next track in the list.
The Beatles
2,3
The Beatles - 1
Abbey Road
Help!
Rubber Sour
Sgt. Peppers Lonely Hea
>
>
>
>
>
GB
The Beatles 1
Love Me Do
>
From Me to You
>
She Loves You
>
I Want to Hold Your Han >
Can’t Buy Me Love
>
Music player
Love Me Do
Artist:
The Beatles
12:34
UPnP
5. Press and hold the Fast-forward or Rewind button to move through the current track. The longer
the button is pressed, the greater the speed at which the player will move through the track.
Release the button when the desired point is reached. (Note that this feature is not supported
when playing files encoded using the FLAC format.)
36
Repeat tracks
1. When a track is playing , press the Menu button to enter the main Music player menu.
2. Rotate the Tuning Control Rotary until ‘Repeat play’ is highlighted on the display. Press the
Tuning Control Rotary to turn on the repeat function. Your selected track will be played
repeatedly and the repeat indicator will show on the display.
1
2
3. To turn off the repeat option, select the ‘Repeat Play’ again.
Music player
Love Me Do
Artist:
The Beatles
12:34
UPnP
Shuffle tracks
1. When a track is playing , press the Menu button to enter the main Music player menu. Rotate
the Tuning Control Rotary until ‘Shuffle play’ is highlighted on the display. Press the Tuning
Control Rotary to turn on the shuffle function. Your selected track will be shuffled and the shuffle
indicator will show on the display.
2. To turn off shuffle select the ‘Shuffle play’ again.
If both Repeat and Shuffle playback options are activated then both Repeat and Shuffle icons will
be shown in the display.
Note:
The shuffle play function may only be used if the current selection comprises fewer than 512
tracks.
37
1
1-2
Music player
Love Me Do
Artist:
The Beatles
UPnP
12:34
Display modes
Your radio has a range of display options when in Music Player mode. Note that the availability of
information depends on the specific media files, their format and upon the server capability. (Not
all UPnP servers make information from the media files available in the same way.)
Music player
Sleep Away
19:14
GB
1. Press the Info button to cycle through the different options.
3:11
3:22
UPnP
a. Progress bar
Displays the playback progress for the track currently playing.
b. Artist
Displays the artist information for the track currently playing.
c. Album
Displays the album information for the track currently playing.
d. Format
Displays the bit rate and format of the track currently playing.
e. Buffer
Displays the radios internal buffer status during media playback.
1
Music player
19:15
Sleep Away
Album:
Not specified
UPnP
Whenever the Music Player is displaying an information screen (as opposed to a menu screen),
the time is displayed in the top-right corner of the display, and a WiFi strength indicator is shown
in the bottom-right corner together with an indicator showing the radio is obtaining the media
from a UPnP server.
Music player
19:16
Sleep Away
Today’s Date:
07/04/2014
UPnP
Music player
Sleep Away
19:16
Playback buffer
UPnP
Music player
Sleep Away
19:16
Bit rate: 192 kbps
Codec: MP3
Sampling Rate:
44.1 kHz
UPnP
38
Playlists
Sometimes you may wish to set up a list of music tracks or albums which can then be played
without further action - as background music for a party, for example. Your radio can be
configured to hold a queue of up to 500 tracks in a playlist menu. The tracks or albums for the
playlist can be selected from your UPnP server. The playlist is held in memory in your radio until
external power is removed, or until the playlist is cleared from the menu.
Adding a single track to your playlist
1. When selecting (or when playing) a track using a UPnP server press and hold the Tuning
Control Rotary and the display will show 'Added to My playlist'.
2. The track will be added to the playlist for playback later.
Adding an entire album or folder
3. When using a UPnP server highlight the chosen album, artist or folder and press and hold
the Tuning Control Rotary. The display will show 'Added to My playlist'.
4. Each of the tracks within the album, artist or folder selection will be added to the playlist individually.
This allows any unwanted tracks to be removed from the playlist if needed (see the following
sections).
The Beatles 1
1,3
Love Me Do
>
From Me to You
>
She Loves You
>
I Want to Hold Your Han >
Can’t Buy Me Love
>
Added to My
playlist
All Artists
The Beatles
Beautiful South
Beethoven
Cat Stevens
Cream
Added to My
playlist
39
>
>
>
>
>
Viewing your playlist
1. Press the Standby button to switch on the unit. Press the Mode button and rotate the Tuning
Control Rotary as needed until the Music Player mode display is shown. Then press the
Tuning Control Rotary. The Music Player menu will then be shown on the display.
Music player
1
2. Rotate the Tuning Control Rotary until 'My Playlist' is highlighted on the display. Press the
Tuning Control Rotary button to enter the playlist.
2,3
1. Press the Menu button to enter the main Music Player menu.
2. Rotate the Tuning Control Rotary until 'My Playlist' is highlighted on the display. Press the
Tuning Control Rotary button to enter the playlist.
GB
Love Me Do
From Me to You
She Loves You
I Want to Hold Your Han
Can’t Buy Me Love
My playlist
1
3. Rotate the Tuning Control Rotary until the track you wish to erase is highlighted. Press and
hold the Tuning Control Rotary.
4. You will be asked to confirm the deletion. To delete the track rotate the Tuning Control Rotary
buttons until 'YES' is highlighted on the display.
Press the Tuning Control Rotary to cause the track to be deleted.
>
>
>
>
>
My playlist
3. Rotate the Tuning Control Rotary to scroll through the playlist. Tracks which are served via
UPnP will show their track name.
Erasing a track from the playlist
Shared media
My playlist
Clear My playlist
System settings
Main menu
Love Me Do
From Me to You
She Loves You
I Want to Hold Your Han
Can’t Buy Me Love
My Playlist
Delete from
My playlist?
2-5
5. If you do not wish to delete the track highlight 'NO' and press the Tuning Control Rotary to
cancel the operation.
40
Clearing the playlist
1. Press the Menu button to enter the main Music Player menu.
Music player
Shared media
USB playback
My playlist
Repeat play: Off
Shuffle play: Off
2. To clear the whole playlist press the Tuning Control Rotary until 'Clear My playlist' is highlighted
on the display. Press the Tuning Control Rotary.
3. To clear the whole playlist rotate the Tuning Control until 'YES' is highlighted on the display.
Press the Tuning Control Rotary to cause the playlist to be cleared.
>
>
Clear My Playlist
Remove all from My playlist
4. If you do not wish to clear the playlist highlight 'NO' and press the Tuning Control Rotary to
confirm.
1
Playing your playlists
1. Press the Menu button to enter the main Music Player menu.
2. Press the Tuning Control Rotary until 'My playlist' is highlighted on the display. Press the
Tuning Control Rotary button.
3. To play the playlist from a particular track, rotate the Tuning Control Rotary until the desired
track is highlighted then press the Tuning Control Rotary to start play.
4. While playing from the playlist, you can use this function to jump to a particular track within
the playlist. While playing from the playlist, you may add additional tracks or albums or remove
specific tracks (please see the preceding sections).
41
Music player
2-4
Shared media
USB playback
My playlist
Repeat play: Off
Shuffle play: Off
My playlist
Love Me Do
From Me to You
She Loves You
I Want to Hold Your Han
Can’t Buy Me Love
>
>
Wake On LAN
If you use a computer as a UPnP server for playing your music files via your radio, you may not
wish to keep that computer running when you are not using the radio. If your computer is suitably
configured, it can either shut down, or enter a standby or hibernation state when it is not being used.
Shared media
?DAD: LES:
>
?JENNY: Jenny’s music >
HOME_PC: Mum’s music >
GB
Your radio can wake up a computer which has shut down using a Wake On LAN command via
the network provided that the radio has previously connected to a UPnP server application on
that computer. A computer which is not currently active will be shown with a question mark in the
list of UPnP servers.
Many computers will not respond to Wake On LAN commands from the radio in all modes, and may
require software, device driver, BIOS, hardware or router configuration changes for this function to
operate. Failure of a computer to respond to Wale On Lan is not considered a fault of the radio.
Prune servers
Your radio stores details of the UPnP servers that it has seen via its network connection in its
internal memory. If you use the radio at different locations you may find that there are servers
listed by the radio that are no longer available. The prune servers functions allows the list to
be reinitialized so that only active UPnP servers on the currently connected network are shown
when selecting ‘Shared Media’ from the Music Player menu.
My Playlist
Repeat play: Off
Shuffle play: Off
Clear My playlist
Prune servers
1. Press the Menu button to enter the main Music Player menu.
Prune invalid
2. Rotate the Tuning Control Rotary until ‘Prune servers’ is highlighted on the display. Press the
control.
Music player
>
Prune shared media
wake on LAN servers?
3. To remove servers that are no longer required rotate the Tuning Control Rotary until ‘Yes’ is
highlighted on the display. Press the control to cause the servers to be removed.
4. If you do not wish to prune servers rotate the Tuning Control Rotary to highlight ‘No’ and press
the control to confirm.
42
Keep network connected
Keep network connected
By default, your radio will shut down its WiFi connection when it is in standby. This minimizes
power consumption but it does mean that you will need to switch that radio on manually in order
to use either the ‘Play to’ function or any other remote control software.
If you need to be able to remotely control the radio even when it has been put into standby, then
you can choose to keep the network connected by using the ‘Keep connected’ option in the
network setting menu. In the standby mode display either the WiFi signal indicator is shown with
or without a cross through it according to the chosen network settings.
Windows 7’Play to’ function (UPnP renderer)
If your use Window 7, it is possible to choose a music album, track or playlist at the computer
and then tell Windows that this should be played on the radio using the ‘Play to’ function. Using
suitable software (sometimes known as a UPnP Control Point), similar functionality is available
for other computer types and for handheld devices using Apple’s iOS or Android operating
systems. In this mode the radio acts as a UPnP Renderer.
1. In order to use the ‘Play to’ function, the radio must be actively connected to the network. The
first time that you use the ‘Play to’ function you will need to allow Windows to recognize your
radio. To do this, please go to step 2. If you have previously used ‘Play to’ so that Windows
remembers your radio and you have configured your radio to keep its network connection in
standby mode, then go to step 3.
2. If your radio is not currently running, or does not have an active connection to your network,
then should first switch on your radio and select the Music player mode. Then select ‘Shared
media’ from the menu so that the radio establishes a connection with Windows Media Player
on your PC. After this step, all other functions may be performed from your computer.
3. At your Windows 7 PC, locate the file, album or playlist that you wish to play on the radio.
4. Use the right-hand mouse button to pop-up a menu of option for the chosen item and select
the ‘Play to’ option.
5. Windows should show you one or more devices, including your radio, to which you may choose
to send the music. Highlight the radio item and click with the left mouse button.
43
06/04/2011
06/04/2011
15:37
15:37
6. Windows will then open a ‘Play to’ window showing the track or tracks to be played. Your
computer will then take control of your radio. Your radio will then enter the Digital Media
Renderer mode (DMR) and after a few seconds the radio will start playing. The display on the
radio will show that it is in DMR mode.
GB
7. While the radio is playing in DMR mode you can use the controls in the ‘Play to’ window on
your computer to skip tracks, fast-forward or rewind, to pause or restart, and to change the
volume on the radio. You may also use the controls on your radio to adjust volume, display
track information (press the Info button) or to change operating mode. It is not possible to skip
tracks or pause playback using the radio’s controls while it is in DMR mode.
8. While playing, you may select additional content within Windows and again use the ‘Play to’
function (see step 3-5). The additional tracks will be added to the playlist in the current ‘Play to’
window. You may also delete or change the order of tracks within the ‘Play to’ window.
9. When you wish to exit DMR mode, simply either switch off your radio or press the mode button
to select a different operating mode.
Don’t forget that in order to reselect the DMR mode and to be able to use ‘Play to’ from
Windows you must first ensure that your radio has an active connection to your network (see
step 1 and 2 above).
DMR
12:34
Would You Be Happ
Playback buffer
DMR
12:34
Would You Be Happ
Artist:
The Corrs
UPnP
UPnP
DMR
12:34
Would You Be Happ
Album:
The Best of the Corrs
DMR
12:34
Would You Be Happ
Bit rate: 192 kbps
Codec: WMA
Sampling rate: 44.1 kHz
UPnP
UPnP
Note:
Some Windows security software can prevent correct operation of the ‘Play to’ function. Such
software may have updates or configuration options which will permit ‘Play to’ to operate
correctly-please consult your anti-virus software supplier. The ‘Play to’ function in Windows 7
has been tested successfully with the WFR-29 radio when using Microsoft’s security Essentials
software without problems.
44
Using USB memory devices
This section describes how to use your radio to access and playback your audio files via USB
memory devices. USB slots are located on top of the unit. This is opened by lifting the rubber
cover on top of the radio.
Important: Your radio is only designed to work with USB memory flash memory devices. It is not
intended to be connected to hard disk drives or any other type of USB device.
It is possible to use SD or SDHC cards for media storage and playback when held in a suitable
USB adaptor. However, due to the wide variation of such adaptors, it is not possible to guarantee
that al adaptor/ card combinations will work with the radio.
The WFR-29C has been tested with a range of USB memory devices of up to 64GB capacity.
USB memory must use the FAT or FAT 32 filing system in order to operate with the sound
system. However, there are many different card variants available and not all cards can be
guaranteed to work in the WFR-29C. USB memory must use the FAT or FAT 32 filing system in
order to operate in the WFR-29C.
Audio formats supported for playback are MP3, WMA AAC and WAV. Playback does not support
files encoded using WMA lossless, WMA Voice, WMA 10 professional, nor files of any format
which have DRM protection.
Cautions:
In order to minimize the risk of damage to your radio, your USB Memory, please place the unit
such that the device cannot easily be knocked while it is inserted in the socket.
Remove the USB before carrying the unit or if not using the USB feature for a prolonged period.
Place the unit in Standby mode removing your USB memory device.
The USB connection is intended only for flash memory devices. The use of hard disk storage
media is not supported.
Play back via USB files stored on MP3 players is not guarantee.
45
Inserting and removing memory devices
1. Plug the USB memory devices into the rectangular slot on the top of the unit.
Note: the USB socket is upside down compared to those commonly found on PCs.
2. To select USB mode press the Mode button and rotate the Tuning control Rotary until the Music
Player mode is shown on the display. Press the Tuning Control Rotary to select the option.
Playing files from USB memory devices
GB
2
1. Carefully insert the USB memory device into the USB slot. Press the Standby button to switch
on the radio. The radio may detect the memory has been connected in which case it will ask
whether you wish to open the folder view of the memory contents. Press the Tuning Control
Rotary to select ‘Yes’ and skip to step 4 below. If the USB memory was not automatically
detected, proceed as follows.
2. To select USB playback mode press the Mode button and rotate the Tuning control Rotary as
needed until Music Player mode is selected. Press the Tuning Control Rotary to select the option.
3. Rotate the Tuning Control Rotary until ‘USB playback’ is highlighted on the display and press
the control. Your radio will now list the content stored on the USB memory device. If there are
many files or folders this may take a few seconds.
4. Rotate the Tuning Control Rotary to highlight the required folder and press the control to
enter the current folder. The list of tracks in the current folder will be displayed. Alternatively, if
you have nested folders (such as album folders within an artist folder) then you will simply step
to the next folder level.
5. Rotate the Tuning Control Rotary to select the track and press the control to begin playing
from the highlighted track. All files in the current folder will then be played in turn. Files are
played in the order in which they exist in the filing system of the USB memory (they are not
sorted by file name or track number).
6. Controlling playback from the USB memory device including shuffle and Repeat functions is
explained in the section of Music player.
46
DAB Radio
Using DAB mode for the first time
1. Carefully extend the telescopic aerial.
2. Press the Standby button to switch on the radio. If the radio has been used before the last
used mode will be selected.
3. Press the Mode button and rotate the Tuning control Rotary as needed so that DAB radio mode
is selected on the display. Press the Tuning Control Rotary to select the option.
4. If this is the first time that DAB mode is used a quick scan of the Band III DAB channels will be
carried out. The display will show 'Scanning'. (If the radio has been used before the last used
station will be selected instead.) During the scanning process, as new stations are detected
the station counter will increase and the stations will be added to the list which is stored in the
radio. The bar graph indicates the progress of the scan.
5. When scanning is completed the radio will list the stations found (in numeric-alpha order 0....9...A...Z),
unless it has previously been tuned to a DAB station. Rotate the Tuning Control Rotary to
scroll through the list of available DAB radio stations. Press the Tuning Control Rotary to
select the highlighted station. The display may show 'Connecting...' while the radio re-tunes.
Rotate the Volume control knob to set the sound level as needed.
2
Scan
Stations: 24
Scanning
3
Station list
5
Heart
heat
Kerrang
Kiss
LBC
DAB
12:34
LBC
London’s Biggest
Conversation - LBC
6. If the station list is still empty after the scan the display will show "No stations found". If no
stations are found it may be necessary to relocate your radio to a position giving better reception.
5
47
DAB
radio
DAB Radio
Selecting a DAB radio station
1. When playing a DAB radio station, the display normally shows the name of the current station
with other related information.
2. Rotate the Tuning Control Rotary to access the radio station list and to scroll through the
available stations.
3. Press the Tuning Control Rotary to select the highlighted station. The display may show
'Connecting...' while the radio re-tunes.
DAB
12:34
Heart
More music variety on
Heart
2,3
Station list
4. Use the Volume control knob to set the sound level as needed.
Note: If the display shows 'Station Not Available' it may be necessary to relocate your radio to a
position giving better reception. A question-mark in front of the station name merely indicates that
the station has not recently been detected by the radio. It may still be available.
GB
Heart
heat
Kerrang
Kiss
LBC
4
Secondary services
DAB
LBC
Connecting...
12:34
Some DAB radio stations can have one or more secondary stations associated with them.
Typically these are not broadcast continually. If a station has a secondary station available then
the secondary will appear in the list of station names beneath the main (or primary) station.
Examples are the programs 'Daily Service' and 'Parliament' on BBC Radio 4.
1. To listen to a secondary service, rotate the Tuning Control Rotary to scroll to the chosen station,
and press the Tuning Control Rotary to tune to the station. If the secondary service is not
available (off-air) then the primary service will be selected.
Station list
1
BBC Radio 3
BBC Radio 4
Daily Service
?Parliament
BBC Radio 5 Live
48
Display modes
Your radio has a range of display options when in DAB mode:1. Press the Info button to cycle through the different options.
a. Text
Displays text messages such as the artist or track name,
phone in number, traffic alerts, etc.
b. Program Type
Displays the type of station being listened to such as Pop,
Classic, News etc.
c. Multiplex Name / Frequency
Displays the name of the DAB multiplex to which the
current station belongs as well as its broadcast frequency.
d. Signal error / strength
Displays the signal error and strength for the station
being listened to. A lower error number indicates a better
quality of radio signal. The signal strength graph can be
used when positioning the radio or its antenna. For good
reception the graph should occupy three or more blocks.
DAB
12:34
Heart
More music variety on
Heart
1
DAB
Heart
Pop Music
12:34
DAB
Heart
MXR Yorkshire
Freq: 223.936MHz
12:34
DAB
Heart
Signal error: 5
12:34
Strength:
e. Bit rate and audio type
f. Date
Displays the digital bit rate and audio coding information for
the station being listened to.
Displays the current date.
DAB
12:34
Heart
Bit rate: 128 kbps
Codec: MP2
Channels: Joint Stereo
A signal strength indicator is always shown in the lower area of the display on the right hand side.
If the broadcast being received is in stereo, then the stereo speaker symbol will be shown.
If the currently tuned station has been stored as a preset, then the preset number will also be
shown.
49
DAB
Heart
Today’s Date:
14/09/2010
12:34
Finding new DAB radio stations
Should you wish to use your radio for DAB reception in a new location, or if no stations were
detected during the initial scan, you can follow this procedure to allow your radio to find out which
DAB radio stations are available.
1. Ensure that the telescopic antenna is extended, and then press the Mode button and rotate
the Tuning Control Rotary as needed to highlight DAB radio mode. Press the Tuning Control
Rotary to select the option.
GB
DAB
1
2. Once in DAB mode press the Menu button.
Station list
Scan
Manual tune
Prune invalid
DRC
>
>
>
3. Rotate the Tuning Control Rotary until 'Scan' is highlighted on the display.
2
4. Press the Tuning Control Rotary to initiate the scan. The display will show 'Scanning' and
your radio will perform a scan of the DAB Band III frequencies. As new stations are found the
station counter will increase and stations will be added to the list. The bar graph indicates the
progress of the scan.
Scan
Stations: 24
Scanning
3,4
50
Manual Tuning
Manual tuning allows you to tune directly to the various Band III DAB channels (5A to 13F).
1. When in DAB mode press the Menu button so that the display shows the DAB menu.
2. Rotate the Tuning Control Rotary until 'Manual tune' is highlighted.
DAB
1,7
3. Press the Tuning Control Rotary to enter manual tune option.
6. Press the Back button to choose a different frequency.
7. Press the Menu button a second time to access the main DAB menu then select 'Station list'
to return to normal tuning.
51
>
>
>
Manual tune
4. Rotate the Tuning Control Rotary to choose the required DAB channel.
5. Press the Tuning Control Rotary to cause the radio to tune to the chosen channel. When the
radio has tuned, the display shows the channel number and frequency, and the name of the
DAB multiplex found (if any). A bar graph shows the signal strength and is useful if you need to
reposition the radio or its aerial. The minimum signal marker 'I' which separates the left and
right parts of the signal graph shows the minimum signal level required for satisfactory reception.
Any new radio stations found on the tuned DAB multiplex will be added to the list stored in the
radio.
Station list
Scan
Manual tune
Prune invalid
DRC
2-5
11B 218.640 MHz
11C 220.352 MHz
11D 222.064 MHz
12A 223.936 MHz
12B 225.648 MHz
Manual tune
6
11C 220.352 MHz NOW Cam
Strength:
Dynamic Range Control setting
Dynamic Range Control (also known as DRC) can make quieter sounds easier to hear when
your radio is used in a noisy environment by reducing the dynamic range of the audio signal.
1. Press the Standby button to switch on your radio.
2. Press the Mode button and rotate the Tuning Control Rotary as needed to highlight DAB radio
mode. Press the Tuning Control to select the option.
GB
1
3. Press the Menu button to enter the DAB menu.
DAB Radio
4. Rotate the Tuning Control Rotary until 'DRC' is highlighted on the display.
DAB
radio
2
5. Press the Tuning Control Rotary to enter the DRC adjustment mode. The current DRC setting
will be indicated with an asterisk.
DAB
6. Rotate the Tuning Control Rotary to highlight the required DRC setting (the default is Off).
'DRC Off' - DRC is switched off, Broadcast DRC will be ignored.
'DRC high' - DRC is set as sent by broadcaster.
'DRC low' - DRC level is set to 1/2 that sent by broadcaster.
3
7. Press the Tuning Control Rotary to confirm the setting.
4-7
Station list
Scan
Manual tune
Prune invalid
DRC
>
>
>
DRC
DRC high
DRC low
DRC off
*
Note:
Not all DAB broadcasts use the DRC function. If the broadcast does not provide DRC
information, then the DRC setting in the radio will have no effect.
52
Station order setup
Your radio has 3 station order settings from which you can choose. The station order settings
are, alphanumeric, ensemble and valid.
Note:
The default station order on your radio is alphanumeric.
1. Press the Standby button to switch on your radio.
2. Press the Mode button and rotate the Tuning Control Rotary as needed to highlight DAB radio
mode. Press the Tuning Control Rotary to select the option.
1
DAB Radio
DAB
radio
3. Press the Menu button to enter the DAB menu list.
4. Rotate the Tuning Control Rotary until 'Station order' is highlighted.
Press the Tuning Control Rotary to enter the station order adjustment mode.
5. Rotate the Tuning Control Rotary to choose between 'Alphanumeric', 'Ensemble' and 'Valid'.
'Alphanumeric' - sorts the station list alpha-numerically 0...9 A...Z.
'Ensemble' - organizes the station list by DAB multiplex.
'Valid' - shows only those stations for which a signal can be found.
The current setting is indicated by an asterisk.
6. Press the Tuning Control Rotary to select the required station order.
2
3
>
>
>
Station order
Alphanumeric
Ensemble
Valid
4-6
7. Press the Back button as needed to return to the DAB menu or to the stations list.
7
53
DAB
Scan
Manual tune
Prune invalid
DRC
Station order
*
Prune stations
If you move to a different part of the country, some of the stations which were listed may no
longer be available. Also, from time to time, some DAB services may stop broadcasting, or may
change location or frequency. Stations which cannot be found, or which have not been received
for a very long time are shown in the station list with a question mark. The Prune stations function
will delete the marked DAB stations from your station list.
GB
1. Press the Standby button to switch on your radio.
2. Press the Mode button and rotate the Tuning Control Rotary as needed to highlight DAB radio
mode. Press the Tuning Control Rotary to select the option.
1
3. Press the Menu button to enter the DAB menu.
DAB
radio
DAB Radio
4. Press the Tuning Control Rotary until 'Prune invalid' is highlighted.
Press the Tuning Control Rotary.
2
DAB
5. To cause the stations list to be pruned, eliminating unavailable stations rotate the Tuning
Control Rotary until 'YES' is highlighted on the display.
3
6. Press the Tuning Control Rotary to cause the invalid station names to be removed from the
station list. If you do not wish to prune stations, highlight 'NO' and then press the Tuning Control
Rotary. The display will revert to the previous menu.
Note:
If you have moved your radio to a different part of the country you should also carry out a search
Scan
Manual tune
Prune invalid
DRC
Station order
>
>
>
Prune invalid
4-6
This removes all invalid
Stations continue?
*
for new stations (please see the section 'Finding new stations').
54
FM Radio
Operating your radio in FM mode
1. Carefully extend the telescopic aerial and press the Standby button to switch on your radio.
2. Press the Mode button and rotate the Tuning Control Rotary as needed to highlight FM radio
mode. Press the Tuning Control Rotary to select the option.
3. Rotate the Tuning Control Rotary in a clockwise direction. The displayed frequency will increase.
Press the Tuning Control Rotary to carry out an auto-tune. Your radio will scan up the FM band
from the currently displayed frequency and will stop scanning when it finds a station of sufficient
strength.
4. The display will show the frequency of the signal which has been found. If RDS information is
available, after a few seconds the display will show the radio station name. If you only hear hiss
or interference, simply press the Tuning Control Rotary to scan further. Your radio may have
found a spurious interference signal.
5. To find more FM stations press the Tuning Control Rotary to repeat the scan operation. To scan
down in frequency, rotate the Tuning Control Rotary in a anti-clockwise direction first and then
press the Tuning Control Rotary. Your radio will scan down the FM band from the currently
displayed frequency and will stop scanning when it finds a signal of sufficient strength.
6. When the end of the waveband is reached your radio will recommence tuning from the opposite
end of the waveband. Use the Volume control knob to adjust the sound level as needed.
55
1
FM
104.90MHz
FM Radio
2
FM
V.H.B.N.
FM Radio
3-5
6
10:38
FM
radio
10:39
Manual tuning
1. Carefully extend the telescopic aerial and press the Standby button to switch on your radio.
2. Press the Mode button and rotate the Tuning Control Rotary as needed to highlight FM radio
mode. Press the Tuning Control Rotary to select the option.
3. Rotate the Tuning Control Rotary to control the frequency that the radio will tune to. The
frequency will change in steps of 50kHz.When the end of the waveband is reached the radio
will recommence tuning from the opposite end of the waveband.
1
FM
104.90MHz
FM Radio
2
4. Use the Volume control knob to adjust the sound level as needed.
FM
V.H.B.N.
10:38
GB
FM
radio
10:39
FM Radio
4
56
Display modes
Your radio has a range of display options when in FM mode:1. Press the Info button to cycle through the different options.
a. Text
b. Program Type
c. Frequency
Displays text messages such as the artist or track name, phone in
number, traffic alerts, etc.
Displays the type of station being listened to such as Pop, Classic,
News etc.
FM
V.H.B.N.
1
10:39
FM Radio
FM
V.H.B.N.
Displays the frequency of the FM signal.
10:42
106.50MHz
FM Radio
d. Date
Displays the current date.
Note: If no RDS information is available, then the radio will only be able to display the frequency.
There will be no text or program type information available under these conditions.
The radio only provides displays when there is information available. So if there is no text, for
example, that display is not available.
The RDS indicator at the bottom of the display shows that there is some RDS data present in the
broadcast being received.
The stereo speaker display shows that the radio is receiving a stereo broadcast (please see also
'Stereo/Mono switching').
57
FM
V.H.B.N.
FM Radio
10:43
Today’s Date:
15/04/2014
FM
V.H.B.N.
10:43
Arts
FM Radio
Scan setting
When using the FM mode your radio can be set to either scan local stations or to scan all
stations including distant radio stations.
1. Press the Mode button and rotate the Tuning Control Rotary as needed to highlight FM radio
mode. Press the Tuning Control Rotary to select the option.
2. Press the Menu button to enter the FM menu.
3. Rotate the Tuning Control Rotary until 'Scan setting' is highlighted and then press the Tuning
Control Rotary to enter the scan adjustment mode. The current scan setting is indicated with
an asterisk.
FM
104.90MHz
1
GB
FM
radio
FM
2
4. To set your radio so that only the stations with the strongest signals are found during scanning
rotate Tuning Control Rotary until 'YES' is highlighted. Press the Tuning Control Rotary to
confirm the setting. (Normally this will restrict scanning to local transmissions.)
Alternatively, to set your radio so that all available stations are found during scanning (local and
distant transmissions) rotate the Tuning Control Rotary until 'NO' is highlighted. Press the Tuning
Control Rotary to confirm the setting.
FM Radio
10:38
Scan setting
Audio setting
System setting
Main menu
>
>
FM station scan
3,4
Strong stations only?
FM station scan
Strong stations only?
58
Stereo / Mono switching
If the FM radio station being listened to has a weak signal, some hiss may be audible. It is
possible to reduce this hiss by forcing the radio to play the station in mono rather than stereo.
1. Press the Mode button. Rotate and press the Tuning Control Rotary as needed to select the
FM radio mode display and tune to the required FM station as previously described.
2. Press the Menu button to enter the FM menu.
3. Rotate the Tuning Control Rotary until 'Audio setting' is highlighted on the display. Press the
Tuning Control Rotary to enter the audio setting mode. The current setting is indicated with
an asterisk.
FM
104.90MHz
1
FM
radio
FM
2
4. To switch to mono in order to reduce the hiss from a weak FM signal rotate the Tuning Control
Rotary until 'YES' is highlighted. Press the Tuning Control Rotary to confirm the setting.
Alternatively, to return to the normal automatic 'stereo or mono' mode press the Tuning Control
Rotary until 'NO' is highlighted. Press the Tuning Control rotary to confirm the setting.
FM Radio
10:38
Scan setting
Audio setting
System setting
Main menu
FM weak reception
3,4
Listen in Mono only?
FM weak reception
Listen in Mono only?
59
>
>
Presetting stations in DAB and FM modes
There are 5 memory presets each for DAB and FM radio. They are used in the same way for
each operating mode.
1. Press the Standby button to switch on your radio.
2. Tune to the required radio station as previously described.
GB
Preset stored
1
3. To store the station as a preset, press and hold the required Preset button (1-5) until the display
shows 'Preset stored'. The station will be stored under the chosen preset button. Repeat this
procedure as needed for the remaining presets.
3
4. Stations which are already stored in the presets may be over written by following the above
procedure.
Note:
The radio station presets are retained in memory when the radio is switched off and disconnected
from the mains supply.
Recalling a preset in DAB and FM modes
1. Press the Standby button to switch on your radio.
1
FM
104.90MHz
2. Select the required operating mode.
10:38
FM Radio
4
3. Momentarily press the required Preset button. Your radio will then tune to the station stored in
the selected preset memory. The chosen preset number is also shown in the lower area of the
radio display, e.g. '★4'.
3
60
Listening to Spotify
Playing music using Spotify Connect
Introduce your radio to a whole new world of music. With Spotify, you can enjoy instant access to
millions of songs
A Spotify Premium subscription is required.
For details, see the Spotify homepage.
http://www.spotify.com
The Spotify software is subject to third party licenses found here:
www.spotify.com/connect/third-party-licenses
1. Prepare for playback
● Download Spotify app (
) to your smartphone or tablet and log in to the app.
● Check the network environment and then turn on this radio’s power (please refer to ‘Configuration’
in the previous section.)
Note:
It is necessary that your radio and your smartphone connect to the same wifi network, so that
you can find the radio on your smartphone or tablet later.
● Ensure your radio has the "Keep Network Connected" option turned on to enable Spotify
Connect to access the radio in Standby mode or non-network mode (DAB/ FM/ Aux-In).
2. Open Spotify on your smartphone, then enter the Playback screen as shown in the right side.
3. Press the Mode button and rotate the Tuning Control Rotary to highlight the Spotify mode
display. Press the Tuning Control Rotary to select the option. The message 'Waiting for Users'
is displayed.
61
Spotify
Waiting for Users
Spotify
14:16
4. Play tracks via your radio.
Press
the Connect icon at the bottom right corner of the screen and you should find your radio
on the list. Press the item and your smartphone/ tablet is linked with your radio (e.g. WFR-28C).
You can see the green Connect icon indicating the connect is on radio. Now you can listen to
audio streamed wirelessly from your linked smartphone/ tablet.
Spotify
Fables of Faubus
09:08
GB
Sangean WFR-29C
Spotify
4:36
8:12
Note:
If you cannot see the icon, it indicates no connect device available. Check your device’s user
manual or the manufacture’s support site as a firmware upgrade may be required.
5. Control playback.
Use the controls on your Connect-enabled device (i.e Smartphone/tablet) or controls on your
radio to play or pause audio, navigate tracks and control volume.
6. Disconnect Spotify from your radio
Press
the icon and you will see your smartphone on the list, press the item and Spotify will
play via your smartphone. In addition, you can switch off your radio or use the mode button to
select a different operating mode.
62
Display mode- Spotify Connect
Your radio has a range of display options when playing Spotify Connect. Press the Info button to
cycle through the different options
Spotify
Fables of Faubus
a. Progress bar Displays the playback progress for the track currently playing
09:08
Spotify
4:36
b. Artist Displays the name of the artist for the track currently playing
Spotify
Sweet Talker
8:12
14:51
Artist:
Jessie J
Spotify
1
c. Album Displays the name of the album from which the current track is taken.
2
87
Spotify
Sweet Talker
Album:
Sweet Talker
(Deluxe Version)
Spotify
1
d. Bit rate Displays the bit rate and sampling rate of the track currently playing
2
87
Spotify
Sweet Talker
1
2
14:51
Bit rate: 320 kbps
Sampling Rate:
44100 Hz
Spotify
e. Playback buffer Displays the radios internal buffer level
14:50
87
Spotify
Sweet Talker
14:51
Playback buffer
Note:
If the Audio streaming from Spotify Connect is interrupted or stopped (e.g. control passed to
another device), the message “Waiting for Users” is displayed.
63
Spotify
1
2
87
Streaming data rate - Spotify Connect
Your radio can change different music streaming quality when you stream content from Spotify. If your
internet connection has a low data usage allowance, or has a relatively low maximum data rate, it is
strongly suggested that your radio uses a lower streaming quality (data rate) for Spotify connections.
In some cases this may allow more reliable streaming, although some loss of audio quality will occur.
Network settings
Internet radio
Last listened
Station list
System settings
Main menu
Network wizard
WPS WiFi setup
View settings
Manual settings
The data rate used for Spotify Connect is confi gured on a web browser.
View settings
System settings
1. You need to access the radio's confi guration web page following the steps below:
Access the menu for the current mode by pressing the Menu button> Select “System settings”>
Select “Network”> Select “View settings”> Use the Select button to enter the “View settings”
and IP address is shown on the display> Note down the IP address shown on the display for
the next stage> Ensure that your computer/ Smartphone is on the same network as the radio.
Enter the IP address noted above into the address bar of your web browser.
GB
Wlan region
Equaliser
DHCP enable
Network
SSID:
Time/Date
Julia S
Brightness
IP address:
Contrast
192.168.1.27
2. When you enter the radio’s configuration web page, the top page allows you to choose the
streaming quality (96k/ 160k/ 320k). The selected streaming quality will be applied when your
radio streams music from a new playlist of Spotify.
Friendly name - Spotify Connect
2
You can personalize the name of your radio so that it can be easily identified within connected
network, UPnP server or Spotify app.
1. Follow the steps described in point 1 above and you can view some of the radios settings as
well as changing the “Friendly name.”
2. Type the name in the box and click Apply to save the change. The new Friendly name will be
viewable on the connect network devices.
64
Clock and Alarms
Automatically updating the clock
Your radio will normally update the clock automatically when connected to the internet. If you
enter a time setting manually, the radio will calculate a local time offset which is then stored in
memory. Whenever it synchronizes the clock using the internet, including after a power failure,
your radio will then set the clock automatically using this information.
Main menu
FM
Aux in
Sleep
Alarms
System settings
You may wish to use the radio away from the internet, in which case you may specify that the
unit sets its clock from DAB or FM radio broadcasts.
>
System settings
After a power failure the radio will then set its clock the next time that you turn on the radio in
DAB or FM mode. Alternatively you may specify that the time is not automatically updated. In this
case the clock must always be set manually after a power interruption.
Equaliser
Network
Time/Date
Language
>
>
>
>
1. With your radio switched on, press the Menu button to access the menu for the current mode.
Time/Date
2. Rotate the Tuning Control Rotary until 'System settings' is highlighted on the display. Press
the Tuning Control Rotary to enter the system settings menu.
1
3. Rotate the Tuning Control Rotary until 'Time/Date' is highlighted on the display. Press the
Tuning Control Rotary to enter the time setup.
4. Rotate Tuning Control Rotary until 'Auto update' is highlighted on the display. Press Tuning
Control Rotary to enter the auto-update menu.
5. Rotate the Tuning Control Rotary to choose an update option from 'Update from DAB', 'Update
from FM', 'Update from Network' or 'No update' as required. Press the Tuning Control Rotary
to confirm your choice. The radio will then exit to the previous menu display.
65
Set Time/Date
Auto update
Set format
Set timezone
Daylight savings
>
>
Auto update
2-5
Update from DAB
Update from FM
Update from Network
No update
*
Setting the clock format
The clock display used in standby mode and on the playing mode screens can be set to 12 or 24
hour format. The selected format is then also used when setting the alarms.
Main menu
FM
Aux in
Sleep
Alarms
System settings
1. With your radio switched on, press the Menu button to access the menu for the current mode.
2. Rotate the Tuning Control Rotary until 'System settings' is highlighted on the display. Press the
Tuning Control Rotary to enter the system settings menu.
1
3. Rotate the Tuning Control Rotary until 'Time/Date' is highlighted on the display. Press the
Tuning Control Rotary to enter the time setup.
4. Rotate the Tuning Control Rotary until 'Set format' is highlighted on the display. Press the
Tuning Control Rotary to enter the clock format menu. The current clock display format is
marked with an asterisk.
5. Rotate the Tuning Control Rotary to select either 12 or 24 hour format. Press the Tuning
Control Rotary to confirm your choice of clock format. The display will then revert to the
previous menu.
2-5
GB
>
System settings
Equaliser
Network
Time/Date
Language
>
>
>
>
Time/Date
Set Time/Date
Auto update
Set format
Set timezone
Daylight savings
>
>
Date/Time
12/24 hour format
If the 12 hour clock format is chosen, the radio will then use the 12 hour clock for the setting of
alarms, and will display a 12 hour clock with an AM or PM indicator when in standby mode.
66
Manually setting the clock
The WFR-29C radio will normally set its clock automatically to local time after a connection to the
Internet has been established. Should you need to set the time manually, change the time zone,
or manually switch from winter to summer time (GMT to BST - also known as daylight savings
time), then please follow this procedure.
1. Press the Standby button to switch on your radio.
Main menu
FM
Aux in
Sleep
Alarms
System settings
1
2. To set all time settings press the Menu button to access the menu for the current mode.
3. Rotate the Tuning Control Rotary until 'System settings' is highlighted on the display. Press the
Tuning Control Rotary to enter the system settings menu.
4. To change the time zone setting go to step 11. To change from winter to summer time go to
step 13. To change the current time or date setting rotate the Tuning Control Rotary until
'Time/Date' is highlighted on the display, then press the Tuning Control Rotary to enter the
time and date setting screen.
5. Rotate the Tuning Control Rotary until 'Set Time/Date' is highlighted on the display. Press
the Tuning Control Rotary to enter the clock setup. The day digits will flash.
2
System settings
Equaliser
Network
Time/Date
Language
24-08-2010
13:53
6. Rotate the Tuning Control Rotary until the correct day is shown on the display. Press the
Tuning Control Rotary to enter the selection. The month digits will then flash.
7. Rotate the Tuning Control Rotary to select the correct month. Press the Tuning Control Rotary.
The year digits will then flash.
67
>
>
>
>
Time/Date
Set Time/Date
Auto update
Set format
Set timezone
Daylight savings
Set Time/Date
3-7
>
Set Time/Date
24-08-2010
13:53
>
>
8. Rotate the Tuning Control Rotary to select the correct year. Press the Tuning Control
Rotary to enter the selection. The hour digits will then flash.
9. Rotate the Tuning Control Rotary to select the correct hour. Press the Tuning Control
Rotary to enter the selection. The minute digits will then flash.
Set Time/Date
24-08-2010
13:53
GB
8-14
Set Time/Date
10. Rotate the Tuning Control Rotary to select the correct minutes. Press the Tuning Control
Rotary to enter the selection. The display will then return to the previous menu.
24-08-2010
13:53
11. Rotate the Tuning Control Rotary until 'Set time zone' is highlighted on the display then
press the Tuning Control Rotary.
Set Time/Date
12. Rotate the Tuning Control Rotary to highlight the time zone which is applicable to your
location, then press the Tuning Control Rotary to confirm the setting.
13. Rotate the Tuning Control Rotary until 'Daylight savings' is highlighted on the display then
press the Tuning Control Rotary. The asterisk shows the current setting. (In the UK, ON is
equivalent to British Summer Time, OFF is equivalent to Greenwich Mean Time.)
14. Rotate the Tuning Control Rotary to highlight 'ON' or 'OFF' as required then press the
Tuning Control Rotary to confirm the setting.
24-08-2010
13:53
Set timezone
Time/Date
Set Time/Date
Auto update
Set format
Set timezone
Daylight savings
>
>
Daylight savings
Time/Date
Set Time/Date
Auto update
Set format
Set timezone
Daylight savings
UTC+00:00:Dublin,Lon
UTC+00:30:
UTC+01:00:Madrid,Arr...
UTC+01:30:
UTC+02:00:Athens,Ca...
>
Daylight savings
>
68
Setting the alarm clock
Your radio has two separate alarms which can be set to wake you to either the radio, USB or a
buzzer alarm. In the event of a power interruption your radio has built in memory that will retain
your alarm settings. Ensure that the time is set correctly before setting the alarms.
1. Press the Menu button and rotate the Tuning Control Rotary until ‘Main menu’ is highlighted.
Press the Tuning Control Rotary to enter the menu.
2. Rotate the Tuning Control Rotary until ‘Alarms’ is highlighted and the press the Tuning Control
Rotary to enter the selection.
Alarms
Alarm 1: Off [00:00]
Alarm 2: Off [00:00]
1
Alarm 1
3. Rotate the Tuning Control Rotary until the desired alarm (1 or 2) is highlighted on the display.
Press the Tuning Control Rotary to enter alarm setup.
4. Rotate the Tuning Control Rotary until 'Time' is highlighted on the display. Press the Tuning
Control Rotary to adjust the alarm time.
1-6
Enable:Off
Time: 00:00
Mode: Buzzer
Volume: 20
Save
Alarm 1- Set time
5. Rotate the Tuning Control Rotary to choose the alarm hour. Press the Tuning Control Rotary
to confirm the setting.
6. Rotate the Tuning Control Rotary to choose the alarm minute. Press the Tuning Control Rotary
to confirm the setting. The display will then return to the alarm setting menu. If the radio has
been set to use a 12 hour clock format, there will also be an option here for setting AM or PM
for the alarm time.
69
07:00
Alarm 1- Set time
07:30
Setting the alarm clock - cont.
7. Rotate the Tuning Control Rotary to highlight 'Enable' and press the Tuning Control Rotary.
The display will show the Frequency options for the alarm. The alarm frequency options are as
follows:
'Off' - the alarm will be disabled
'Daily' - the alarm will sound everyday
'Once' - the alarm will sound once
'Weekends' - the alarm will sound only at weekends
'Weekdays' - the alarm will sound on weekdays only
Rotate the Tuning Control Rotary to choose the required alarm frequency option. Choosing
Off will disable the alarm. Press the Tuning Control Rotary to confirm the selection. If you
choose to set the alarm to Once you will also need to set the date using the Tuning Control
Rotary.
8. The alarm can be set to buzzer, Internet radio, DAB radio, FM radio. For whichever radio
mode is selected, the radio alarm may be set to any of the stations which have been stored
as presets or to the station most recently listened to. Rotate the Tuning Control Rotary to
highlight the current 'Mode' option for the alarm, then press the Tuning Control Rotary if you
wish to change it. Rotate the Tuning Control Rotary to highlight either 'Buzzer' or the required
mode. Press the Tuning Control Rotary to confirm the selection.
9. If setting the alarm to a radio option, rotate the Tuning Control Rotary to highlight the 'Preset:'
option then press the Tuning Control Rotary if you wish to change it. Choose from either the
radio station 'Last listened' to, or from the presets 1 - 5. Scroll to the chosen option and press
the Tuning Control Rotary to confirm the selection. Note that you can only set the alarm to
use a preset which has already been stored.
Alarm 1
7-9
Enable:Off
Time: 07:30
Mode: Buzzer
Volume: 20
Save
GB
Alarm 1 frequency
Off
Daily
Once
Weekends
Weekdays
Alarm1 date/time
24-08-2010
07:30
Alarm 1
Enable:Once
Time: 07:30
Mode: Buzzer
Volume: 20
Save
Alarm 1
Enable:Once
Time: 07:30
Mode: DAB
Preset: Last listened
Volume: 20
Alarm 1 mode
Buzzer
Internet radio
DAB
FM
Alarm 1 preset
Last listened
1. Radio Luxembourg
2. Rlck Antenne
3. Absolute Radio
4. [Not set]
70
Setting the alarm clock - cont.
10. Rotate the Tuning Control Rotary until the 'Volume:' option is highlighted on the display and
press the Tuning Control Rotary if you wish to change it. The radio uses the saved volume
setting for each alarm when it sounds. Set the required volume using the Tuning Control
Rotary to confirm the setting.
11. In order to store the alarm settings rotate the Tuning Control Rotary until 'Save' is
highlighted. Press the Tuning Control Rotary to store the alarm settings. Your radio will
show 'Alarm saved' and will then go back to the list of alarms with the new alarm setting
shown in the display. If you decide not to save the settings, press the Back button. The
display will show 'Save changes' with a 'YES' or 'NO' option. Rotate the Tuning Control
Rotary to choose 'NO' and then press the Tuning Control Rotary. 'Alarm not saved' will
show on the display. Active alarms are shown using small alarm indicators at the bottom of
the playing displays and on the clock display when in standby.
Note:
If you make a mistake at any point while setting the alarms, use the Back button to go back
to the previous screen.
71
Alarm 1
10,11
Enable:Once
Time: 07:30
Mode: DAB
Preset: Last listened
Volume:20
Alarm 1 volume
11
Alarm
Saved
When the alarm sounds
The buzzer or radio alarm will sound at the selected times for up to 60 minutes unless cancelled.
The volume used for the alarm will be as specified during the alarm setting procedure. If the
radio cannot connect to the specified radio station, the buzzer alarm will be used instead. To
cancel an alarm, press the Standby button to return to standby mode. The alarm icon will flash at
the bottom of the playing mode displays, and the radio will automatically switch back to standby
mode when the 60 minutes have elapsed.
Alarms
Alarm 1: On [07:30]
Alarm 2: Off [00:00]
GB
1
Buzzer
Note:
If you have your earphone insert while the alarm is sounding, the sound of the alarm will come
out from your earphone.
11:07
Alarm
1
Disabling alarms
1. To disable a single alarm enter the alarm setup menu and rotate the Tuning Control Rotary until
the desired alarm is highlighted on the display. Press the Tuning Control Rotary to confirm.
2. Rotate the Tuning Control Rotary until the 'Enable:' option is highlighted on the display. Press
the Tuning Control Rotary.
Alarm 1
1-4
Enable:Off
Time: 07:30
Mode: Buzzer
Volume: 20
Save
3. Rotate the Tuning Control Rotary to highlight 'Off' and press the Tuning Control Rotary.
4. Rotate the Tuning Control Rotary until the 'Save' option is highlighted on the display then press
the Tuning Control Rotary to save the new setting. The chosen alarm will now be disabled.
72
Snooze timer
1. The buzzer or radio alarm can be silenced for 5 minutes by pressing the Alarm button. Should
you wish for a longer snooze duration this can be extended. Pressing the Alarm button again
while the radio is snoozed will set the available snooze time to 5, 10, 15 or 30 minutes.
2. While the snooze timer is active the remaining snooze time is shown next to the flashing alarm
icon on the clock display.
3. In order to cancel the Snooze timer while the alarm is suspended, press the Standby button.
The display will briefly show an 'Alarm Off' message.
73
1 5 / 0 4 / 2 0 1 4
10:56
1 11:47
Sleep timer
Alarm 1
Your radio can be set to turn off after a preset time has elapsed. The sleep timer setting can be
adjusted between 15 and 120 minutes in 15 minute increments.
15 minutes
1. Press the Menu button and rotate the Tuning Control Rotary until ‘Main menu’ is highlighted.
Press the Tuning Control Rotary to enter the menu.
2. Rotate the Tuning Control Rotary until ‘Sleep’ is highlighted. Press the Tuning Control Rotary to
enter the setup. 'Sleep off' will appear on the display.
GB
1
FM
105.10MHz
11:00
FM Radio
3. Rotate the Tuning Control Rotary to select the desired sleep time. The options are 15 to 120
minutes in 5 minutes increment. Use the OFF option to cancel the sleep function.
12
Set sleep time
4. Your radio will switch off after the preset sleep time has elapsed.
1,2
5. Your radio will switch into standby mode after the preset time has elapsed. An active sleep
timer is shown using a small timer indicator at the bottom of the playing displays. This indicator
also shows the sleep time remaining before the radio switches itself into standby mode.
6. To cancel the sleep time before the preset time has elapsed and to turn off the radio, press the
Standby button to turn the unit off manually. To cancel the sleep timer and leave the radio
playing, go back into the sleep timer settings (steps 1 to 3 above) and select the Off option in
step 3. Alternatively, simply press the Standby button twice in succession to cancel the timer
and switch the radio back on again.
Sleep OFF
Main menu
6
FM
Aux in
Sleep
Alarms
System settings
>
74
Inactive standby
Your radio can be set to standby mode automatically if it idles for a preset period of time. The idle
time setting can be adjusted between 2, 4, 5 and 6 hours.
System settings
1. Press the Menu button and rotate the Tuning control Rotary until 'System Settings' is highlighted.
Press the Tuning Control Rotary to enter the menu.
1
2. Rotate the Tuning Control Rotary until 'Inactive Standby' is highlighted. Press the Tuning Control
Rotary to enter the setup. Options for idle time will appear on the display.
1,2,3
Mute function
Pressing the Volume control knob will mute the output from the loudspeakers.
1. Press the Volume Control Knob to mute the sound output.
2. Press the Volume Control knob again or rotate the Volume Control Knob to un-mute the sound
output.
75
>
>
>
>
>
Timeout
3. Rotate the Tuning Control Rotary to select the desired idle time. Use the OFF option to cancel
the inactive standby function.
4. You radio will switch to standby mode when your radio idle for a preset period of time.
Equaliser
Network
Time/Date
Inactive Standby
Language
1,2
Off
2 hours
4 hours
5 hours
6 hours
X
Display and Audio
Equalizer function
The sound on your radio can be adjusted to suit your personal taste for the material that you are
listening to. The WFR-29C has a range of equalizer modes. Alternatively you may set the treble
and bass levels to your own preferences which can be accessed from the My EQ menu item.
GB
1. Press the Menu button and rotate the Tuning Control Rotary until ‘System settings’ is highlighted.
Press the Tuning Control Rotary to enter the setup.
2. Rotate the Tuning Control Rotary until 'Equalizer' is highlighted on the display. Press the Tuning
Control Rotary to confirm.
3. Rotate the Tuning Control Rotary to cycle through and highlight the various modes. Press the
Tuning Control Rotary to confirm your selection.
a - Flat
b - Rock
c - Pop
d - Jazz
e - Classic
f - News
g - Movie
h - My EQ
The currently selected mode is marked with an asterisk.
Main menu
1
FM
Aux in
Sleep
Alarms
System settings
>
System settings
1-3
Equaliser
Network
Time/Date
Language
Touch pad set
>
>
>
>
>
Equaliser
Flat
Rock
Pop
Jazz
Classic
*
76
Setting up your My EQ profile
If you find the preset equalizer functions not to your liking, you may set up a custom treble and
bass setting as follows:
1. Follow steps 1-2 in the previous section in order to enter the Equalizer menu.
Equaliser
2. Rotate the Tuning Control Rotary until 'My EQ profile setup' is highlighted on the display.
Press the Tuning Control Rotary to enter the adjustment mode.
3. To adjust the bass level rotate the Tuning Control Rotary until 'Bass' is highlighted on the display.
Press the Tuning Control Rotary to enter the adjustment mode and rotate the Tuning Control
Rotary until the desired level (between -14 and +14) is displayed. The sound will change as
you adjust the level. Press the Tuning Control Rotary when you are happy with the bass setting.
2-6
Classic
Pop
News
My EQ
My EQ profile setup
My EQ profile setup
Bass: 0
Treble: 0
Loudness: off
4. To adjust the treble level rotate the Tuning Control Rotary until 'Treble' is highlighted on the
display. Press the Tuning Control Rotary to enter the adjustment mode and rotate the Tuning
Control Rotary until the desired level (between -14 and +14) is displayed. The sound will change
as you adjust the level. Press the Tuning Control Rotary when you are happy with the treble
setting.
Bass
5. To adjust the loudness rotate the Tuning Control Rotary until 'Loudness' is highlighted on the
display. Press the Tuning Control Rotary to enter the setting and repeatedly press the Tuning
Control Rotary to choose to activate or deactivate the loudness function.
6. Press the Back button and the display will prompt you to save the changes. If you wish to save
the changes highlight 'YES'. If you do not wish to save the changes highlight 'NO'. Press the
Tuning Control Rotary to enter the selection.
7. To use the 'My EQ' profile rotate the Tuning Control Rotary until 'My EQ' is highlighted, and then
press the Tuning Control Rotary to make the selection.
The treble and bass settings will be remembered for the next time that you wish to use the 'My
EQ' setting.
77
5
Treble
>
Brightness control
The brightness of the display can be adjusted for when the radio is in standby and for when it is
in use. If you use the unit in the bedroom, you may prefer a lower standby brightness level than a
higher brightness setting.
1. Press the Standby button to switch on your radio. Access the menu for the current mode by
pressing the Menu button.
Main menu
1
2. Rotate the Tuning Control Rotary until 'System settings' is highlighted on the display. Press the
Tuning Control Rotary to enter the system settings menu. Rotate the Tuning Control Rotary
until 'Brightness' is highlighted on the display. Press the Tuning Control Rotary to confirm the
setting.
3. In brightness menu, there are 3 settings:
Time out:to adjust the length of time before the backlight turns off.
On level: to adjust the the brightness when the radio is in use.
Dime level: to adjust the brightness when the radio is in stanby. Rotate the Tuning Control
Rotary to select your option and press the Tuning Control Rotary to confirm your setting.
FM
Aux in
Sleep
Alarms
System settings
GB
>
System settings
Brightness
Contrast
Equaliser
Network
Time/Date
>
>
>
1
Backlight
Timeout
On level
Dim level
>
>
>
2-3
78
Language selection
By default your radio will display all menus and messages in English. You can choose your
preferred language.
1. Access the menu for the current mode by pressing the Menu button. Rotate the Tuning Control
Rotary until 'System settings' is highlighted on the display. Press the Tuning Control Rotary
to enter the settings menu.
2. Rotate the Tuning Control Rotary until 'Language' is highlighted on the display. Press the
Tuning Control Rotary to enter the menu.
System settings
1
Inactive Standby
Language
Factory Reset
Software update
Setup wizard
SELECT
/SEEK
Language
3. Rotate the Tuning Control Rotary until your preferred language is highlighted and press the
Tuning Control Rotary to confirm the setting.
79
1-3
English
French
German
Italian
Danish
>
>
Headphone socket
A 3.5mm Headphone Socket located on the left hand side of your radio is provided for use with
headphones. Inserting a plug automatically mutes the internal loudspeaker.
Please be aware that the sensitivity of headphones can vary widely. We therefore recommend
setting volume to a low level before connecting headphones to the radio. It is also recommended
to reduce the volume before unplugging your headphones.
GB
IMPORTANT:
Excessive sound pressure from earphones and headphones can cause hearing loss.
Line out socket (3.5mm Jack)
A 3.5mm Line Out socket located on the left hand side of your radio is provided for connecting
the audio signal to an external amplifier. Inserting an audio cable into this socket will not mute the
internal loudspeaker. Set the volume control on the radio to minimum if desired.
80
Auxiliary input socket
A 3.5mm Auxiliary Input socket located on the left hand side of your radio is provided for
connecting the audio signal from an external audio source such as an MP3 or CD player.
1. Connect a stereo lead from the headphone output of your MP3 or CD player to the Aux In socket
located on the left hand side of your radio. Typically this lead will have a 3.5mm stereo plug at
both ends.
2. Switch on your radio.
3. Press the Mode button rotate the Tuning Control Rotary until 'AUX in' mode is shown on the
display. Press the Tuning Control Rotary to select the option.
4. Press the 'play' on the connected audio device. If you are using its headphone output for the
connection, set its volume control to a level of somewhere between two-thirds and maximum
(the objective is to get a strong audio signal but without too much distortion). Then adjust the
volume on the radio as required.
Note:
if using an iPod as the sound source, you may need to set its output to maximum to get an
adequate audio signal level.
5. After use, disconnect your player in order to listen to your radio conventionally.
81
Aux in
3
AUX
Information
Factory reset
If you wish to completely reset your radio to its initial state this may be performed by following
this procedure. By performing a factory reset, all user entered settings will be erased.
Main menu
FM
Aux in
Sleep
Alarms
System settings
1. Access the menu for the current mode by pressing the Menu button. Rotate the Tuning Control
Rotary to highlight the 'Main menu' option, then press the Tuning Control Rotary to confirm.
2. Rotate the Tuning Control Rotary until 'System settings' is highlighted and then press the
Tuning Control Rotary to confirm the setting.
3. Rotate the Tuning Control Rotary until 'Factory Reset' is highlighted and then press the Tuning
Control Rotary to confirm the setting. Rotate the Tuning Control Rotary to highlight 'YES' to
proceed. If you do not wish to carry out a system reset, highlight 'NO' and then press the Tuning
Control Rotary to confirm the setting. The display will revert to the previous menu.
1
>
System settings
Time/Date
Language
Touch pad set
Rec. Default dest.
Factory reset
1-3
GB
>
>
>
>
Factory reset
Proceed?
4. With 'YES' highlighted, a full reset will be performed and the radio will restart as if first plugged
in. The DAB stations list together with any preset stations will be erased and your wireless
network connection details will be lost. All configuration settings will be restored to their defaults,
the clock and alarms will be reset.
In case of malfunction for any reason, reset the product as described above to resume normal
operation. It may be necessary in some cases to disconnect the mains power, then reconnect
power after 10 seconds. In case of malfunction due to electrical fast transient (burst), reset
the product as above (reconnection of the power source may be required) to resume normal
operation.
WELCOME TO
DIGITAL RADIO
Setup wizard
Start now?
82
Software update
From time to time, new software features for your radio may be developed. Your radio has therefore
been designed to allow its internal software to be updated using your Internet connection. You
should not attempt to update your radio unless it is recommended to you by Sangean Customer
Services. Updating the software may remove all network settings, radio station presets and alarm
settings from your radio. It is important that you do not attempt this procedure unless you have a
good Internet connection and a reliable mains power supply. If the radio connects to your router
using a WiFi connection, make sure that this is also reliable before proceeding.
1. The 'Software update' option is accessed via the 'System settings' menu. When you select
'Software update' the menu will display 'Auto check setting' and 'Check now'. If you want your
radio to check periodically for new software versions rotate the Tuning Control Rotary to highlight
'Auto check settings'. Then press the Tuning Control Rotary and select 'YES'. If you do not
want your radio to check for updates select the 'NO' option.
Main menu
FM
Aux in
Sleep
Alarms
System settings
System settings
Factory reset
Software update
Info
Software update
2. To check if there are any software updates available currently, press the Tuning Control Rotary
to highlight 'Check now' and then press the Tuning Control Rotary to confirm the setting.
The radio will check to see if an update is available. The display will show 'Checking for new
versions'. If there are no updates then the display will show 'Software up to date'. If a software
update is available your radio will then offer the choice of updating the software or not, displaying
'New version available. Update software?'. Select the 'YES' option if you wish to go through
the update process.
3. If you choose to update your radio it will first download the new software and will then reprogram
its internal memory. This may take a few minutes depending on the speed of your internet
connection.
4. Once the software update is completed, the radio will prompt you to press select to restart.
Press the Tuning Control Rotary and your radio will then restart. You may find that you will
need to reconfigure your network connection following an update. You may also need to re-enter
all radio station presets, alarm settings, and configuration options.
83
VERY IMPORTANT: Do not switch off the power to the radio until the update operation is
complete and the radio has restarted, otherwise the unit may become permanently damaged.
>
Auto-check setting
Check now
Software update
Check periodically for
new versions?
Software update
Auto-check setting
Check now
>
Network profiles
Each time that you connect your radio to a WiFi network, the radio will store the details of that
connection (SSID, security key, DHCP/IP address settings) as a profile. Up to four such profiles
are stored in the radio so that if the unit is used in multiple locations there is no need to enter the
network settings when returning to a location previously visited.
The radios stores the four most recent profiles in memory identified by their SSID. Normally the
radio will attempt to connect to one of the stored profiles and only if it is unable to do so will you
need to use the Network Wizard.
In the event that you visit a location only once you may wish to delete the profile for the network
in that location to avoid losing other profiles.
1. Access the menu for the current mode by pressing the Menu button. Rotate the Tuning Control
Rotary until 'System settings' is highlighted on the display. Press the Tuning Control Rotary to
enter the settings menu.
2. Rotate the Tuning Control Rotary until 'Network' is highlighted on the display. Press the Tuning
Control Rotary to enter the Network settings menu.
3. Rotate the Tuning Control Rotary until 'Network profile' is highlighted on the display. Press the
Tuning Control Rotary to see the stored profiles. The profile which is currently in use (if any) is
marked with an asterisk.
Internet radio
Last listened
Station list
System settings
Main menu
>
>
>
GB
System settings
Equaliser
Network
Time/Date
Lantuage
>
>
>
>
Network settings
Network wizard
View settings
Wlan region
Manual settings
Network profile
>
>
Network profile
Jones family
Paul’s network
Test router
*
4. To remove a profile from memory, rotate the Tuning Control Rotary to highlight the profile to be
deleted and then press the Tuning Control Rotary to confirm the setting.
5. The radio will offer a 'YES' or 'NO' selection. Rotate the Tuning Control Rotary to select 'YES'
and then press the Tuning Control Rotary to confirm the setting. The selected profile will be deleted.
Confirm delete
Confirm delete
Note:
that it is not possible to delete a profile which is currently in use.
84
Software version display
The software version display is provided for reference and customer support purposes and
cannot be changed.
1. Access the menu for the current mode by pressing the Menu button. Rotate the Tuning Control
Rotary until 'System settings' is highlighted on the display. Press the Tuning Control Rotary
to enter the System settings menu.
2. Rotate the Tuning Control Rotary until 'Info' is highlighted on the display. Press the Tuning
Control Rotary to display the software version and radio ID.
Audio FAQ
Your radio can access some audio help for Internet Radio use.
1. With your radio switched on and in the Internet Radio mode, rotate the Tuning Control Rotary
until 'Station list' is highlighted on the display and the Tuning Control Rotary.
2. Rotate the Tuning Control Rotary until 'Help' is highlighted on the display. Press the Tuning
Control Rotary to enter the Help menu.
3. Rotate the Tuning Control Rotary until 'FAQ' is highlighted. Press the Tuning Control Rotary to
display some frequently asked questions.
4. Rotate the Tuning Control Rotary to choose a question that suits your requirements and press
the Tuning Control Rotary to listen to the answer. Adjust the volume as needed.
85
Main menu
FM
Aux in
Sleep
Alarms
System settings
>
System settings
Factory reset
Software update
Setup wizard
info
>
Info
SW version:
ir-mmi-FS2026-0200-0008
_V2.0.20.31732-1B8
Radio ID:
002261123ABC
Accessing your audio files via a UPnP server using Windows Vista and XP
If your computer is running Windows Vista or XP, then Windows Media Player version 11
includes a UPnP server which will make your files available to your radio. There are other UPnP
server solutions available for non-Windows users and for Windows users who may wish to use
an alternative (see the section of Use with Windows, Apple Mac and Linux).
GB
It is beyond the scope of this instruction book to cover all possible options for UPnP. We explain
the use of Microsoft's Windows Media Player here since that will be the first choice for the
majority of users.
Set up UPnP access on a Windows PC
1. If your PC is running Microsoft Windows Vista or Windows XP then you can use Microsoft's
Windows Media Player version 11 to act as your UPnP (Universal Plug and Play) media server.
If not already installed on your PC, Windows Media Player 11 may be downloaded from
Microsoft’s web site and installed by following the instructions detailed in its installation wizard,
or by using Microsoft's Windows Update facility.
2. Once installed, Windows Media Player 11 can create a library from all the media files available
to it on your PC. To add new media files to the library, select the 'Library' tab, then 'Add to
Library… > Advanced Options', click 'Add', choose the files you wish to add and click ‘OK’.
The next step is to connect your radio to Windows Media Player 11 and to configure the program
to allow the radio to access your media library.
3. Press the Standby button to switch the unit on. Then press the Mode button and rotate the
Tuning Control Rotary as needed until the Music Player mode display is shown. Press the
Tuning Control Rotary to select the option. The main 'Music Player' menu will then be displayed.
86
Set up UPnP access on a Windows PC - cont.
4. Rotate the Tuning Control Rotary until 'Shared media' is highlighted and press the Tuning
Control Rotary. The radio will scan for all available UPnP servers. It may take a few seconds
for the radio to complete its scan. The radio will display '<Empty>' if no UPnP servers are
found.
5. After scanning, select your UPnP server using the Tuning Control Rotary. If you are using
WMP 11 as the server, your radio will then normally display 'Unauthorized - Select to retry' at
this stage.
6. Your PC may prompt you that there has been a connection to your UPnP server. Whether
prompted or not, in order that the radio may access the music files, you will need to click the
'Library' tab in WMP 11 and select the 'Media Sharing…' item to open the 'Media Sharing'
window. Make sure the box 'Share my media to:' is ticked.
7. In the 'Media Sharing' window, the radio will be listed as an unknown device. Click on the
unknown device shown to select it, then click the 'Allow' button and then click 'OK'.
Note:
If you are using Microsoft Windows' firewall software, this should be correctly configured by
WMP 11. If you are using third party firewall software you may need to manually configure it to
allow your unit and WMP 11 to communicate.
8. On the radio, select the named server again using the Tuning Control Rotary. If WMP 11 is
now able to communicate with your radio you will be presented with some media selection
options on the display.
87
Audio codecs
Bit-Rates
Your radio supports a range of audio codecs which provide compatibility
with a wide range of Internet Radio stations. These also allow users to
stream music from their computers or to play directly from USB and SD/
SDHC fl ash memory devices.
The following table summarizes the maximum supported bit-rates for
the various audio formats that are playable on your radio. Higher rates
may be playable in some cases but performance of the product may be
affected.
Note that for any given audio codec, there are many streaming
protocols available, and thus even if an Internet Radio station uses a
supported format, this does not guarantee that every such station will
work with your radio. The radio stations database to which your radio
connects is checked for compatibility so that most stations should be
playable without problems. Similarly when streaming media from a
computer, while a codec may be supported, there can be many subtle
variations in formats, tagging schemes and protocols (even within
UPnP). In general your radio will play the supported formats with most
common UPnP servers.
Codec
AAC (LC)
MP3
Real Audio
WAV
WMA (3)
Maximum supported rate
320 kbits/sec
320 kbits/sec
64 kbits/sec
1.536 Mbits/sec
320 kbits/sec
All codecs support 2-channel (stereo) coded files only.
All codecs support sample rates up to 48 kbits/sec (includes 32 and
44.1 kbits/sec).
USB and SD/SDHC playback supports MP3 and WMA formats only.
Files which have Digital Rights Management (DRM) protection applied
will not be playable on your radio.
(1) The maximum supported bit-rate is for a 48 kHz sampling, 2 channels
and 16-bits per sample.
(2) WMA Lossless, WMA Voice, WMA 10 Professional, and files which
have DRM protection are not supported.
88
GB
Cautions
Do not allow your radio to be exposed to water, steam or sand.
● The radio shall not be exposed to dripping or splashing and no
objects filled with liquids, such as vases, shall be placed on the radio.
Do not leave your radio where excessive heat could cause damage.
The name plate is located on the rear of the radio.
● It is recommended to operate the product such that there is a
minimum distance (10cm recommended) to adjacent objects in order
to ensure good ventilation.
● The ventilation of the product should not be restricted by covering it
with items such as newspapers, tablecloths, curtains etc.
● No naked flame sources such as lighted candles should be placed
on the product.
● It is recommended to avoid using or storing the product at extremes
of temperature. Avoid leaving the unit in cars, on windows sills, in
direct sunlight etc.
● The radio must be used in a moderate climate.
89
Specifications
Circuit features
Power Requirements
Mains Power Supply
AC 100- 240 V/50/60 Hz/12W
Output power
1W+1W
Headphone socket
3.5 mm diameter, stereo
Frequency Coverage
FM
87.5 - 108 MHz
Aux In socket
3.5mm diameter, stereo
DAB
174.928 - 239.200 MHz
Line Out socket
3.5mm diameter, stereo
WiFi
802.11b and 802.11g supported with WEP and
WPA/WPA2 encryption
Compatible with 802.11n routers which
offer mixed mode support for 802.11b/g
Support dual frequency 5G/2.4G router
WIFi 5G: 5.15GHz~5.25GHz(Band 1) for
indoor-only use.
Aerial System
DAB
FM
GB
Telescopic aerial
Telescopic aeria
The company reserves the right to amend the specification without notice.
If at any time in the future you should need to dispose of this product please note that: Waste electrical products should not be disposed
of with household waste. Please recycle where facilities exist. Check with your Local Authority or retailer for recycling advice. (Waste
Electrical and Electronic Equipment Directive)
90
Download PDF
Similar pages