OS-310M - Test and Measurement Instruments CC

OS-310M
PORTABLE DIGITAL OSCILLOSCOPE
http://www.instrumentsgroup.co.za
http://www.instrumentsgroup.co.za
http://www.instrumentsgroup.co.za
http://www.instrumentsgroup.co.za
http://www.instrumentsgroup.co.za
http://www.instrumentsgroup.co.za
http://www.instrumentsgroup.co.za
http://www.instrumentsgroup.co.za
http://www.instrumentsgroup.co.za
http://www.instrumentsgroup.co.za
http://www.instrumentsgroup.co.za
http://www.instrumentsgroup.co.za
http://www.instrumentsgroup.co.za
http://www.instrumentsgroup.co.za
http://www.instrumentsgroup.co.za
100 MHz, 2channel
Digital Storage Oscilloscope
4000 count Digital Multimeter
FEATURES
14
100MHz bandwidth
Fast rise time and low overshoot
Repetitive random interleaved 5GS/s
Two channels and dual digitizers
Low drift and internal noise
Excellent internal noise reduction
External trigger
Built-in 3- 3/4(4,000 counts) digital multimeter
with auto or manual range
Roll mode
Pre - trigger up to 10 div
Extra bright backlit LCD display
Independently floating isolated scope and DMM
for safety
Automatic optimized panel setting and tracking
according to input signal
Automatic measurements
Arithmatic function
RS-232C Programmability / Communication
Rechargeable Ni-Cd battery and external AC adapter
Direct hardcopy through RS-232C
Hand free design and deluxe soft carrying case
Third Party CE(Safety and EMC) approval
Hands free automatic test
Software & Accessories(Optional)
FEATURES
Measurement & calculation : Vp-p, BMS, Mean Frequency, Rise T, fall T, Period, Width, Duty
On/Off display of waveforms
Vertical position control
Time/div control
Trigger mode, source, couple, slope and position control
Grid control
Vertical magnification
Waveforms save, recall, edit and print
Different color display of each channel
Cascade or Tile to arrange multiple opened windows
OPERATING ENVIRONMENT
Composition
RS-232C Interface Cable Software(3.5 disk) Operation Manual
Hardware
CPU : 4860 2 or better Memory : 8M for full Functionality
Disk space : 5.0M byte or over Operation Manual
Software : Operating System : Window 95
Other options : Thermal Printer, Rechargeable battery, Carrying case, RS-232C cable(9 to 25)
Supplied by :
Test and Measurement Instruments C.C.
www.instrumentsgroup.co.za
t.m.i@iafrica.com Tel: 0027 (011) 683 4365
http://www.instrumentsgroup.co.za
http://www.instrumentsgroup.co.za
http://www.instrumentsgroup.co.za
http://www.instrumentsgroup.co.za
http://www.instrumentsgroup.co.za
http://www.instrumentsgroup.co.za
http://www.instrumentsgroup.co.za
http://www.instrumentsgroup.co.za
http://www.instrumentsgroup.co.za
http://www.instrumentsgroup.co.za
http://www.instrumentsgroup.co.za
http://www.instrumentsgroup.co.za
http://www.instrumentsgroup.co.za
http://www.instrumentsgroup.co.za
http://www.instrumentsgroup.co.za
Specifications
8bits
Sensitivity
1mV / div ~ 5V / div(1-2-5 sequence, 12 Steps)
Accuracy
3% (5% for 1mV, 2mV)
Bandwidth
DC ~ 100MHz (-3dB)
Low frequency limit in AC couple
10Hz
Input channel
CH1, CH2
Input impedance
1M
Mode
CH1, CH2 turned on or off independently
Max safe input volts
42Vpk (DC +AC peak at 1KHz)
Max. sample rate
Real time 25MS/s(simultaneous on 2 channels)
Repetitive 5GS/s(simultaneous on 2 channels)
/ approx. 25pF
2k words / CH
Acquisition memory
Sweep time
PORTABLE DIGITAL OSCILLOSCOPE
Resolution
Equivalent sample
5ns / div ~ 2 s / div
Real time sample
5ns / div ~ 0.5s / div
Roll mode
1s / div ~ 5s / div
Timebase error
1%
Pre - trigger
MAX. 10div
Source
CH1, CH2, EXT
Mode
Auto, Norm, TV - V, TV - H
Couple
DC, AC, HF rej, LF rej
Slope
+ OR -
Level
Manual setting or automatic 50% setting
Sensitivity
TRIGGER
FREQUENCY
CH1
CH2
EXT
DC ~ 10MHz
10 ~ 100MHz
DC ~ 100MHz
SENSITIVITY
5mV ~ 5V / div
1mV, 2mV / div
0.5div
2.5mVp-p
1.5div
7.5mVp-p
0.1Vp-p
TV trigger
Sync. section : 1.0div or more, negative
AC cut off frequency
Approx. 10Hz (-3dB)
HF / LF cut off frequency
Approx. 50kHz (-3dB)
Auto lower frequency
Approx. 30Hz
Display
5 STN LCD(CCFI back light), 320 X 240 pixel 10div(H) X 8div(V),
25 X 25 dots / div(V), grid(full, quad, board)
interpolation(sine, linear) dot join on/off, persistence,
X-Y Horizontal mag/alt mag
Save / Recall
Average(exponential 2~256)
save / recall max. 10 waveforms & Set - up
clear waveform. set- up
Parameter
Math
Arithmetic
15
Amplitude(p-p, rms, average), frequency, period,
pulse width (positive, negative), duty cycle
addition, subtration, inversion
Probe(X1, X10) LCD contrast dec / inc, RS-232C
Utility
reference, track
The front panel settings are automatically performed
so that the optimum waveform is displayed for an input signal
freq:20Hz~20MHz, duty:20~80%, amplitude:10mV~50V
(20mV or more for 20 to 100Hz)
Hold mode is used to stop the updating of the waveform, run mode to update repeatedly
Hardcopy through RS-232C interface
The setup data before power off and all the displayed information are retained.
At power on these data are displayed and used as setup data.
3-3/4 (4,000 counts)
RANGE
RESOLUTION
400mV
0.1mV
RANGE
RESOLUTION
400
0.1
4V
1mV
4k
1
40V
10mV
40k
10
400V
100mV
400k
100
4M
1K
Diode test, continuity test, min., max., relative, hold
Frequency
1kHz
20%
Output voltage
0.5V
30%
Power supply
Exclusive AC adaptor, built - in battery
Rated external input voltage : 12V
Power consumption for external power input : 1A(Typ)
Power consumption
12W (Typ)
Built - in battery
Ni-Cd Battery, Automatically rechargeable (Voltage drop is automatically detected)
Operation
80 Min. (Typ)
Recharge time
15Hours(Typ) (at power off), 30Hours(Typ) (at power on)
Specification
+10 ~ +35 (when automatic calibration performed
with in the range of 25 5
Operation
0
Storage
-10
~ +40 , 45 ~ 80%
Dimension
180(W)
Weight
2.0kg
~ +60 , 35 ~ 85%
67(H)
255(D)mm
Supplied by :
Test and Measurement Instruments C.C.
www.instrumentsgroup.co.za
t.m.i@iafrica.com Tel: 0027 (011) 683 4365
Download PDF
Similar pages