HP ProLiant BL490c Generation 6 (G6) Server Blade

QuickSpecs
HP ProLiant BL490c Generation 6 (G6) Server Blade
Overview
HP ProLiant BL490c G6 Server Blade
6. Two (2) SATA Solid State Drive (SSD) bays
7. Up to two (2) Intel® Xeon® 5600 or 5500 series processors
8. Local I/O connector
1. Access Panel
2. Internal USB connector
3. Internal SD card slot
DA - 13236
Worldwide — Version 13 — November 15, 2010
Page 1
QuickSpecs
HP ProLiant BL490c Generation 6 (G6) Server Blade
Overview
4. Two (2) mezzanine I/O expansion slots
5. Embedded Dual Port Flex-10 10GbE Multifunction Server
Adapter
9. Eighteen (18) DDR3 Registered or Unbuffered DIMM Memory
Slots
What's New
Support for Brocade 804 8Gb FC HBA for HP BladeSystem c-Class
At A Glance
The HP ProLiant BL490c Virtualization Blade raises the bar for memory capacity and I/O bandwidth in a half-height blade. Coupling
up to 2 Intel® Xeon® processors with 18 DIMM slots and support for up to 24 NICs, the BL490c gives enterprise data center
managers the ideal server platform for hosting virtual machines.
This document covers the HP ProLiant BL490c G6 server blade only. For more information on HP BladeSystems c-Class Enclosure
and HP BladeSystem c-Class Interconnect and Mezzanine Components, please see the following:
HP BladeSystem c3000 Enclosure QuickSpecs:
http://h18000.www1.hp.com/products/quickspecs/12790_div/12790_div.html
HP BladeSystem c7000 Enclosure QuickSpecs:
http://h18000.www1.hp.com/products/quickspecs/12810_div/12810_div.html
HP BladeSystem c-Class Interconnect and Mezzanine Components:
http://h18004.www1.hp.com/products/blades/components/c-class-interconnects.html
http://h18004.www1.hp.com/products/blades/components/c-class-adapters.html
The HP ProLiant BL490c G6 is a 2-processor server blade optimized for virtualization with high memory capacity and high
bandwidth and flexible networking.
HP ProLiant BL490c G6 server blade includes:
Processor:
Processor
Up to two (2) Intel® Xeon® 5500 or 5600 Series processors, up to 2.93GHz
Intel® 5500 Chipset
Memory:
Memory
Eighteen (18) DIMM slots
Up to 192GB, using PC3-8500R DDR3 Registered (RDIMM) memory, operating at 800MHz when fully populated at 2
DIMMs per Channel in 12 slots
Up to 48GB, using PC3-10600E DDR3 Unbuffered (UDIMM) memory, operating at 1066MHz when fully populated at
2 DIMMs per Channel in 12 slots
Storage Controller:
Controller
HP Integrated SATA Controller
NOTE: RAID functionality requires the use of an optional Smart Array mezzanine card. See the Storage Controller
options section below.
Internal Drive Support:
Support
Up to two (2) non-hot plug SATA Solid State Drives (SSD)
With an attached SB40c Storage Blade, up to six (6) hot plug SFF Serial Attached SCSI (SAS) or SATA Hard Drives
(optional)
Network Controller:
Controller
Embedded NC532i Dual Port Flex-10 10GbE Multifunction Server Adapter
NOTE: Flex-10 capability requires the use of an HP Virtual Connect Flex-10 10Gb Ethernet module. Learn more at:
www.hp.com/go/virtualconnect.
DA - 13236
Worldwide — Version 13 — November 15, 2010
Page 2
QuickSpecs
HP ProLiant BL490c Generation 6 (G6) Server Blade
Overview
NOTE: Each port is autosensing 1 Gb/ 10Gb, and can interoperate with 1Gb HP BladeSystem c-Class interconnect
components.
One (1) additional 10/100 server adapter dedicated to iLO 2 Management
Mezzanine Support:
Support
Two (2) I/O expansion mezzanine slots
Supports up to two (2) mezzanine cards
Dual-Port Fibre Channel Mezzanine options for SAN connectivity (Choice of Emulex ,QLogic or Brocade)
iSCSI Ethernet mezzanine option for optimized iSCSI connectivity
Ethernet server adapter mezzanine options for additional network ports
4X QDR (40Gbps) and DDR (20Gbps) InfiniBand (IB) Mezzanine options for low latency and high bandwidth
server interconnectivity
Storage Controller mezzanine options for additional internal and external storage connectivity
I/O Accelerator mezzanine options for high transaction rate local storage
Internal USB Support:
Support
One (1) internal USB 2.0 connector for security key devices and USB drive keys
One (1) internal SD-HC Card slot
Trusted Platform Module:
Module
One (1) internal TPM 1.2 module connector
Form Factor:
Factor
HP ProLiant BL490c G6 is a half-height server blade that plugs into the HP BladeSystem c3000 and c7000 enclosures
Infrastructure Management:
Management
This server blade requires the latest version of the Onboard Administrator firmware. This firmware release may also
require other subsystem firmware upgrades. For information on the latest firmware versions, please see the Blades
Firmware Maintenance website at: http://h18004.www1.hp.com/products/blades/components/c-classcompmatrix.html
HP Integrated Lights-Out 2 (iLO 2) management processor for simplified server setup, health monitoring and recovery,
power and thermal control, and lights-out remote administration.
HP Insight Control, a product option, delivers essential infrastructure management that can help save time and money
by making it easy to deploy, migrate, monitor, control and optimize your IT infrastructure through a single, simple
management console. Insight Control supports both Windows and Linux-based central management servers.
HP Insight Dynamics for ProLiant, a product option, is an integrated command center that enables IT Staff personnel to
continuously analyze and optimize a converged infrastructure, while automating and reducing the cost of common data
center tasks by as much as 40 percent. This ultimately enables them to dynamically keep pace with the organization's
changing business requirements
Operating Systems:
Systems
Supports Windows, RHEL, SLES, OEL, Solaris, VMware, and Citrix XenServer
Enclosures:
Enclosures
HP offers three different c-Class server blade enclosures to meet your individual needs:
The HP BladeSystem c7000 rack enclosure is 10U high and holds up to 16 ProLiant BL490c G6 servers plugged
vertically.
The HP BladeSystem c3000 rack enclosure is 6U high and holds up to 8 HP ProLiant BL490c G6 servers
plugged horizontally.
The HP BladeSystem c3000 tower enclosure is designed with casters for sites without racks and holds up to 8 HP
ProLiant BL490c G6 servers plugged vertically.
Server blades, storage blades, interconnect modules, power supplies, fans, and redundant Onboard Administrator
modules are all designed to fit into the c3000 and c7000 enclosures.
For additional enclosure information, please see: http://h18004.www1.hp.com/products/blades/components/enclosures/cclass/index.html.
Warranty:
Warranty
This product is covered by a global limited warranty and supported by HP Services and a worldwide network of HP
Authorized Channel Partners. Hardware diagnostic support and repair is available for three years from date of
purchase. Support for software and initial setup is available for 90 days from date of purchase. Enhancements to
DA - 13236
Worldwide — Version 13 — November 15, 2010
Page 3
QuickSpecs
HP ProLiant BL490c Generation 6 (G6) Server Blade
Overview
warranty services are available through HP Care Pack services or customized service agreements. Certain restrictions
and exclusions apply. Hard drives have either a one year or three year warranty; refer to specific hard drive QuickSpecs
for details.
NOTE: Server warranty includes 3 year Parts, 3 year Labor, 3-year on-site support. Warranty repairs may be
accomplished through the use of Customer Self Repair (CSR) parts. These parts fall into two categories: 1) Mandatory
CSR parts are designed for easy replacement. A travel and labor charge will result when customers decline to replace a
Mandatory CSR part; 2) Optional CSR parts are also designed for easy replacement but may involve added complexity.
Customers may choose to have HP replace Optional CSR parts at no charge. Additional information regarding
worldwide limited warranty and technical support is available at:
http://h18004.www1.hp.com/products/servers/platforms/warranty/index.html
DA - 13236
Worldwide — Version 13 — November 15, 2010
Page 4
QuickSpecs
HP ProLiant BL490c Generation 6 (G6) Server Blade
Standard Features
NOTE: For the Standard Features shipped in the "Factory Integrated Models", please see the "Configuration Information - Factory
Integrated Models" section.
Intel® Xeon® Processor X5670 (2.93 GHz, 12MB L3 Cache, 95W, DDR3-1333, HT, Turbo
Processor
2/2/2/2/3/3)
Intel® Xeon® Processor X5650 (2.66 GHz, 12MB L3 Cache, 95W, DDR3-1333, HT, Turbo
2/2/2/2/3/3)
Intel® Xeon® Processor X5570 (2.93 GHz, 8M L3 Cache, 95W, DDR3-1333, HT, Turbo 2/2/3/3)
Intel® Xeon® Processor E5540 (2.53 GHz, 8M L3 Cache, 80W, DDR3-1066, HT, Turbo 1/1/2/2)
Intel® Xeon® Processor L5530 (2.40 GHz, 8MB L3 cache, 60W, DDR3-1066, HT, Turbo 1/1/2/2)
Intel® Xeon® Processor E5504 (2.00 GHz, 4M L3 Cache, 80W, DDR3-800)
NOTE: HT indicates that the processor model supports Intel® Hyper-Threading Technology.
NOTE: Turbo indicates the maximum potential frequency increment when using Intel® Turbo Boost
Technology, with 4, 3, 2, and 1 cores active (on 5500 series processors), or with 6,5,4,3,2,1 cores
active (on 5600 series processors).
NOTE: DDR3 speed is the maximum memory speed of the processor. Actual memory speed may
depend on the quantity and type of DIMMs installed.
NOTE: For the Intel 5500 and 5600 Series, the letter preceding the model number indicates the
performance/wattage of the processor. "X" denotes High Performance/Wattage; "E" denotes Enterprise
Performance/Wattage (Mainstream); and "L" denotes Lower Wattage.
Upgradeability
Upgradeable to two (2) processors
Cache Memory
4MB shared L3 cache
8MB shared L3 cache
12MB shared L3 cache
Chipset
Intel® 5500 Chipset
DA - 13236
Worldwide — Version 13 — November 15, 2010
Page 5
QuickSpecs
HP ProLiant BL490c Generation 6 (G6) Server Blade
Standard Features
Memory
Type
DDR3 Registered (RDIMM) or Unbuffered (UDIMM)
Standard
6 GB (3 x 2GB) RDIMM
Maximum (RDIMM)
192 GB (12 x 16 GB) for Registered Memory configurations
Maximum (UDIMM)
48 GB (12 x 4 GB) for Unbuffered Memory configurations
NOTE: Depending on the memory configuration and processor model the memory speed may run at
1333MHz, 1066MHz or 800MHz. Please see the Online Memory Configuration Tool for details;
www.hp.com/go/ddr3memory-configurator
DDR3 memory options part number decoder
Network Controller
Embedded NC532i Dual Port Flex-10 10GbE Multifunction Server Adapter
NOTE: Flex-10 capability requires the use of an HP Virtual Connect Flex-10 10Gb Ethernet module.
Learn more at: www.hp.com/go/virtualconnect.
NOTE: The iSCSI offload feature of the embedded multifunction adapter requires the HP Accelerated
iSCSI Pack. For more information, please see the QuickSpecs at:
http://h18000.www1.hp.com/products/quickspecs/12466_div/12466_div.html
One (1) additional 10/100 NIC dedicated to iLO 2 Management
I/O Expansion Slots
Two (2) I/O expansion mezzanine slots (x8 PCI Express)
Integrated Manageability HP Integrated Lights-Out 2 (iLO 2) management processor
Storage Controller
HP Integrated SATA Controller
NOTE: RAID functionality requires the use of an optional Smart Array mezzanine card. See the Storage
Controller options section below.
DA - 13236
Worldwide — Version 13 — November 15, 2010
Page 6
QuickSpecs
HP ProLiant BL490c Generation 6 (G6) Server Blade
Standard Features
Maximum Internal
Storage
Non-Hot Plug SATA SSD 128GB
2 x 64GB
Hot Plug SFF SAS
1.8TB
6 x 300GB
NOTE: Hot Plug SFF SAS maximum internal storage supported with optional SB40c Storage Blade
attached.
Graphics
Integrated ATI-RN50 with 32MB video memory
Graphics Resolution
Supported
Resolution Color Depths
Fibre Channel Support
Two (2) optional Fibre Channel HBAs are supported by the HP ProLiant BL490c G6. Both mezzanine
circuit boards connect directly to the server blade system board. These Fibre Channel HBAs are available
via option kits and must be ordered separately.
HBA mezzanine card option kits:
1600 x 1200, 64K, 256, 16
1280 x 1024, 16.7M, 64k, 256, 16
1024 x 768, 16.7M, 64k, 256, 16
800 x 600, 16.7M, 64k, 256, 16
640 x 480, 16.7M, 64k, 256, 16
NOTE: Maximum resolution available via HP Integrated Lights-Out 2 (iLO 2)
remote console is 1280 x 1024.
Emulex LPe1105 4Gb Fibre Channel Host Bus Adapter for c-Class BladeSystem (PN 403621-B21)
Based on the same field-proven ASIC, firmware, and driver technology as Emulex's renowned
LPe1150 HBA, the Emulex LPe1105-HP is fully driver compatible with all Emulex HBAs
Emulex LPe1205 8Gb Fibre Channel Host Bus Adapter for c-Class BladeSystem (PN 456972-B21)
Exceptional performance, enhanced security, and scalable management for virtual server and
enterprise-class applications
QLogic QMH2462 4Gb Fibre Channel Host Bus Adapter for c-Class BladeSystem (PN 403619-B21)
Uses common drivers which means that customers can standardize on one QLogic driver whether
they are using the QMH2462 or other HBAs powered by QLogic
QLogic QMH2562 8Gb Fibre Channel Host Bus Adapter for c-Class BladeSystem (PN 451871-B21)
Provides a first step into the 8Gb future, advanced, embedded support for virtualized
environments and reduced power consumption
HP BLc Brocade 804 8Gb Fibre Channel Host Bus Adapter (PN 590647-B21)
Application oriented Quality of Service (AQoS) providing the ability to configure, prioritize, and
optimize traffic flows from virtual machines and/or applications to the target port
Brocade, Emulex and QLogic Fibre Channel HBAs for HP BladeSystem c-Class feature:
Optimal performance utilizing PCI Express
4/2/1Gb/s auto negotiating speeds (4Gb HBAs)
DA - 13236
Worldwide — Version 13 — November 15, 2010
Page 7
QuickSpecs
HP ProLiant BL490c Generation 6 (G6) Server Blade
Standard Features
8/4/2Gb/s auto negotiation speeds (8Gb HBAs)
Dual-ports for redundant path connections
Up to two FC HBAs per server blade providing redundant FC HBA support
Optimized for HP StorageWorks and supported by third party SAN vendors
Support for Microsoft® Windows® and Linux operating system environments
Compatible SAN
HP ProLiant BL490c G6 server blades are optimized for HP StorageWorks MSA, EVA and XP
HP ProLiant BL490c G6 server blades are compatible with select 3rd party SANs (please see blade
storage page for more details: http://h18004.www1.hp.com/products/blades/components/c-classsans.html
HP Virtual Connect
HP Virtual Connect simplifies server connectivity to data and storage networks, and reduces costs.
Unique HP Flex-10 and FlexFabric technologies make maximum use of network bandwidths, provide
dynamic tuning and enable extreme flexibility to meet individual server and infrastructure requirements.
HP Virtual Connect Enterprise Manager (VCEM) provides a central console to administer network
connections and workloads for thousands of servers. For more information on Virtual Connect Ethernet,
Fibre Channel, Converged Network and management options see: www.hp.com/go/virtualconnect
HP Insight management
software
HP Insight Foundation
Managing the growing number of servers can be complex and expensive for
your organization. IT managers need to address changing business needs
with tools that meet the challenges of managing today's complex
Datacenters.
HP provides management solutions that are designed to simplify a server's
installation, configuration and maintenance throughout the entire server
lifecycle. This provides the customer with higher levels of operational
efficiency and highly reliable systems: http://www.hp.com/go/foundation.
The foundation pack includes:
HP SmartStart
HP Management DVD
HP ProLiant Smart Update Firmware DVD
SmartStart version supported (minimum): SmartStart 8.20
http://www.hp.com/servers/smartstart
NOTE: In an effort to support reducing our environmental impact, the HP
Insight Foundation Suite for ProLiant media will be available as a selectable
option for this server at time of order of a CTO SKU. This will allow
customers to order the number of media kits that best meet their needs and
eliminate receiving unnecessary duplicate media.
HP Integrated Lights-Out 2 HP Integrated Lights-Out (iLO) simplifies server setup, health monitoring,
power and thermal control, and lights-out remote administration of ProLiant
ML, DL, and BL servers. HP iLO functions without additional software and
can be accessed from any location via a web browser. HP iLO works handin-hand with HP Systems Insight Manager, Insight Control suites, and Insight
Dynamics for ProLiant, helping customers unleash the value of the ProLiant
platform and deliver the highest possible quality of IT service. For more
DA - 13236
Worldwide — Version 13 — November 15, 2010
Page 8
QuickSpecs
HP ProLiant BL490c Generation 6 (G6) Server Blade
Standard Features
information, visit: www.hp.com/go/iLO
HP Insight Control, a product option, delivers essential infrastructure
management that can help save time and money by making it easy to
deploy, migrate, monitor, remote control, and optimize your IT infrastructure
through a single, simple management console.
HP Insight Control
Two versions of Insight Control are available, to serve environments requiring
either a Linux-based or a Windows-based central management server: HP
Insight Control for Linux, and HP Insight Control. See
www.hp.com/go/insightcontrol
HP Insight Dynamics for
ProLiant
HP Insight Control includes one year of 24 x 7 HP Software Technical
Support and Update Service ensuring rapid access to HP support staff and
proactive delivery of software updates. For more information about this
service, please visit: http://www.hp.com/services/insight.
HP Insight Dynamics for ProLiant, a product option, is advanced
infrastructure management software that enables IT staff to instantly adjust
their environments to meet dynamic business demands by provisioning,
optimizing and protecting complex infrastructure in minutes. It's a powerful
toolkit, integrated-by-design, that accelerates complex technology projects
and simplifies daily operations, transforming data center economics. With
Insight Dynamics IT professionals can plan capacity and power continuously,
balance workloads across physical and virtual resources, and ensure costeffective high availability. It also enables IT organizations to provision
infrastructure consistently and automatically from pools of shared resources
using a self-service portal. Resources provisioned can range from a single
virtual machine to complex multi-tier environments and their associated
physical and virtual resource requirements. In addition to the previous
functional benefits, it also provides a cost-effective disaster recovery for
physical and virtual environments that works with HP StorageWorks
Continuous Access software for both the Enterprise Virtual Array and the XP
storage array allowing application environments to be reactivated in minutes
with the touch of a button to a remote location.
NOTE: For more information, visit:
http://www.hp.com/go/insightdynamics
DA - 13236
Worldwide — Version 13 — November 15, 2010
Page 9
QuickSpecs
HP ProLiant BL490c Generation 6 (G6) Server Blade
Standard Features
High Performance
Clusters
HP Cluster Platforms
HP Cluster Platforms are specifically engineered, factory-integrated largescale ProLiant clusters optimized for High Performance Computing, with a
choice of servers, networks and software. Operating system options include
specially priced offerings for Red Hat Enterprise Linux and Novell SLES, as
well as Microsoft Windows HPC Server. A Cluster Platform Configurator
simplifies ordering. http://www.hp.com/go/clusters
High Performance Computing (HPC) interconnect technologies are available
for this server as part of the HP Cluster Platform portfolio. These high-speed
InfiniBand and Gigabit interconnects are fully supported by HP when
integrated within an HP cluster. Flexible, validated solutions can be defined
with the help of configuration tools.
http://www.hp.com/techservers/clusters/ucp/index.html
HP HPC Interconnects
HP Cluster Management
Utility
HP Cluster Management Utility (CMU) is an HP-licensed and HP-supported
suite of tools that are used to manage large-scale Linux ProLiant systems.
CMU includes software for the centralized provisioning, management and
monitoring of nodes. CMU makes the administration of clusters user friendly,
efficient, and effective. http://www.hp.com/go/cmu
HP HPC Linux Value Pack HP HPC Linux Value Pack (Value Pack) is an HP-licensed and HP-supported
specially priced software bundle for the development and deployment of
applications on HPC Cluster Platforms. Value Pack includes the Platform LSF
workload scheduler, the HP-MPI parallelization library, the HP Unified
Parallel C compiler and the HP Shmem library, as well as the execution
environments for the libraries and compiler. HP HPC Linux Value Pack
Operating Systems and
Virtualization Software
Support for ProLiant
Servers
Availability
Microsoft Windows Server
Red Hat Enterprise Linux (RHEL)
SUSE Linux Enterprise Server (SLES)
Oracle Enterprise Linux (OEL)
Solaris
VMware
Citrix XenServer
NOTE: For more information on HP's Certified and Supported ProLiant Servers for OS and Virtualization
Software and latest listing of software drivers available for your server, please visit our Support Matrix at:
http://www.hp.com/go/ossupport and our driver download page
http://www.hp.com/support/BL490cG6
Dual-Port Fibre Channel Mezzanine Card for redundant SAN connection
Dual-port embedded 10 Gigabit Ethernet adapters for redundant LAN connections
Redundant ROM
Advanced ECC Memory
Support for Memory Mirroring and Memory Lock-Step Mode
Network adapter teaming (network fault tolerance, transmit load balancing, switch-assisted load
balancing)
DA - 13236
Worldwide — Version 13 — November 15, 2010
Page 10
QuickSpecs
HP ProLiant BL490c Generation 6 (G6) Server Blade
Standard Features
Industry Standard
Compliance
Security
ACPI V2.0 Compliant
PCI 2.2 Compliant
WOL Support
Microsoft® Logo certifications
USB 2.0 Support
Power-on password
Administrator's password
Integrated Lights-Out 2 has 12 customizable user accounts and SSL encryption
Integrated Lights-Out 2 can be disabled via a Global Setting
Security - Trusted Platform The TPM (Trusted Platform Module) is a microcontroller chip that can securely store artifacts used to
Module
authenticate the server platform. These artifacts can include passwords, certificates and encryption keys.
Windows® BitLocker™ Drive Encryption (BitLocker) is a data protection feature available in Windows
Server® 2008. BitLocker leverages the enhanced security capabilities of a Trusted Platform Module
(TPM) version 1.2. The TPM works with BitLocker to help protect user data and to ensure that a server
running Windows Server 2008 has not been tampered with while the system was offline.
NOTE: For more information about TPM, including a white paper, go to: http://www.hp.com/go/TPM
NOTE: ProLiant OS pre-installed units will come with the partition required for TPM deployment.
NOTE: The TPM key is unique to every TPM deployed server and must be retained. Misplacing or losing
the key could result in data loss.
Factory Express Portfolio
for Servers and Storage
HP Factory Express offers configuration, customization, integration and deployment services for HP
servers and storage products. Customers can choose how their factory solutions are built, tested,
integrated, shipped and deployed.
Factory Express offers service packages for simple configuration, racking, installation, complex
configuration and design services as well as individual factory services, such as image loading, asset
tagging, and custom packaging. HP products supported through Factory Express include a wide array of
servers and storage: HP Integrity, HP ProLiant, HP ProLiant Server Blades, HP BladeSystem, HP 9000
servers as well as the MSAxxxx, VA7xxx, EVA, XP, rackable tape libraries and configurable network
switches.
For more information on Factory Express services on your specific server model please contact your sales
representative or go to: http://www.hp.com/go/factory-express.
HP Enterprise
Configurator
The HP eConfigure Enterprise Configurator now provides factory default racking for our HP hardware
portfolio. This approach is aligned with our strategic direction to meet the needs and expectations of our
valued customers. If you require "custom" rack configuration, please contact HP's Customer Business
Center or an Authorized Partner for assistance. For additional information please visit:
http://www.hp.com/products/configurator
DA - 13236
Worldwide — Version 13 — November 15, 2010
Page 11
QuickSpecs
HP ProLiant BL490c Generation 6 (G6) Server Blade
Standard Features
Service and Support
HP Care Pack services provide total care and support expertise with committed response designed to
meet your IT and business needs.
The HP Care Pack service for HP ProLiant BL c-Class server blades, cover the server blade and all HP
branded hardware options qualified for the server, purchased at the same time or afterwards, internal to
the server.
To fully capitalize on your HP BladeSystem servers' capabilities requires a service partner who thoroughly
understands your server technology and systems environment. HP Services, an industry leader in
provision of multi vender support solutions provides a range of support services designed to meet the
varying needs of business. Whether an SMB or large global corporation HP has a HP BladeSystem server
support offer to help you speedily deploy and maximize system uptime.
Recommended Service - Simplify ProLiant solution implementation, maintenance and management.
Support Service - 4-Hour Response Coverage, 3-Year, 24 x 7, Same Business Day
Deployment Service - Installation and Start Up for HP BladeSystem Infrastructure
Enhanced Service - Optimize service level to increase IT performance and availability
Support Service - HP Proactive BladeSystem Service, 1-Year
Deployment Service - Enhanced Network Installation and Start-up for HP BladeSystem Switches
Installation & Start-Up service for HP BladeSystem Infrastructure plus HP BladeSystem Enhanced Network
Installation and Start-UP as per the Customer Description and/or Data Sheet. To be delivered on a
scheduled basis 8am-5pm, M-F, excluding HP holidays.
For a complete listing of service offerings and information visit:
http://www.hp.com/services/bladesystemservices
http://h20219.www2.hp.com/services/us/en/warranty/carepack-servers-proliant.html
DA - 13236
Worldwide — Version 13 — November 15, 2010
Page 12
QuickSpecs
HP ProLiant BL490c Generation 6 (G6) Server Blade
Models
Models
HP ProLiant BL490c G6
X5650 2.66GHz (1P)
595825-B21
Processor(s)
One of the following
depending on model
HP ProLiant BL490c G6
X5570 2.93GHz (1P)
509314-B21
HP ProLiant BL490c G6
E5540 2.53GHz (1P)
509315-B21
HP ProLiant BL490c G6
E5504 2.0GHz (1P)
509316-B21
Cache Memory
Memory
Network Adapter
Storage Controller
Hard Drives
Internal Storage
Optical Drive
Power Supply
Form Factor
DA - 13236
One (1) Intel ® Xeon® Processor X5650 (2.66 GHz, 12MB L3 Cache, 95W,
DDR3-1333, HT, Turbo 2/2/2/2/3/3)
One (1) Intel® Xeon® Processor X5570 (2.93 GHz, 8MB L3 Cache, 95W,
DDR3-1333, HT, Turbo, 2/2/3/3)
One (1) Intel® Xeon® Processor E5540 (2.53 GHz, 8MB L3 Cache, 80W,
DDR4-1066, HT Turbo, 1/1/2/2/)
One (1) Intel® Xeon® Processor E5504 (2.00 GHz, 4MB L3 Cache, 80W,
DDR3-800)
4MB Shared L3 Cache
8MB Shared L3 Cache
12MB Shared L3 Cache
6 GB (3 x 2 GB) PC3-10600 (DDR3-1333) Registered DIMMs
Embedded NC532i Dual Port Flex-10 10GbE Multifunction Server Adapter
and one (1) additional 10/100 server adapter dedicated to iLO 2
management
HP Integrated SATA Controller
No drives included
SSD: Up to 128GB (2 x 64GB) SATA
None
None
Up to eight (8) half-height blades supported in the HP BladeSystem c3000
Enclosure
Up to sixteen (16) half-height blades supported in HP BladeSystem c7000
Enclosure
Worldwide — Version 13 — November 15, 2010
Page 13
QuickSpecs
HP ProLiant BL490c Generation 6 (G6) Server Blade
Configuration Information - Factory Integrated Models
NOTE: This section lists some of the steps required to configure a Factory Integrated Model. To ensure only valid configurations are
ordered, HP recommends the use of an HP approved configurator. Contact your local sales representative for information on CTO
product offerings and requirements.
NOTE: HP does not allow factory integration of options into standard models listed above.
Configure-to-order server blades must start with a CTO Blade.
NOTE: FIO indicates that this option is a Factory Installable Option.
Step 1: Base Server Blade Configuration (Select a configurable Blade)
Models
HP ProLiant BL490c G6 Configure-to-order Server
Configurable Model ships with:
Embedded NC532i Dual Port Flex-10 10GbE Multifunction Server Adapter and one
(1) additional 10/100 server adapter dedicated to iLO 2 management
Integrated Lights-Out 2 Standard Blade Edition
498357-B21
Step 2: Choose Required Options (one of the following from each list unless otherwise noted)
HP Processors
HP Memory
For single processor configuration choose:
Six-Core Processor Option Kits
HP BL490c G6 Intel® Xeon® X5670 (2.93GHz/6-core/95W/12MB) FIO Processor
Kit
NOTE: If two processors are desired, select one 595826-L21 and one 595826-B21.
HP BL490c G6 Intel® Xeon® X5650 (2.66GHz/6-core/95W/12MB) FIO Processor
Kit
NOTE: If two processors are desired, select one 595827-L21 and one 595827-B21.
Quad-Core Processor Option Kits
Intel® Xeon® X5570 2.93GHz Quad Core 95 Watts BL490c G6 Factory Integrated
Processor Option Kit
NOTE: If two processors are desired, select one 509319-L21 and one 509319-B21.
Intel® Xeon® E5540 2.53GHz Quad Core 80 Watts BL490c G6 Factory Integrated
Processor Option Kit
NOTE: If two processors are desired, select one 509322-L21 and one 509322-B21.
Intel® Xeon® L5530 2.40GHz Quad Core 60 Watts BL490c G6 Factory Integrated
Processor Option Kit
NOTE: If two processors are desired, select one 576216-L21 and one 576216-B21.
Intel® Xeon® E5504 2.0GHz Quad Core 80 Watts BL490c G6 Factory Integrated
Processor Option Kit
NOTE: If two processors are desired, select one 509327-L21 and one 509327-B21.
Registered DIMMS (RDIMMs)
HP 2GB (1x2GB) Dual Rank x8 PC3-10600 (DDR3-1333) Registered CAS-9 Memory
Kit
HP 4GB (1x4GB) Dual Rank x4 PC3-10600 (DDR3-1333) Registered CAS-9 Memory
Kit
HP 4GB (1x4GB) Quad Rank x8 PC3-8500 (DDR3-1066) Registered CAS-7 Low
Power Memory Kit
HP 4GB (1x4GB) Single Rank x4 PC3-10600 (DDR3-1333) Registered CAS-9
Memory Kit
DA - 13236
Worldwide — Version 13 — November 15, 2010
595826-L21
595827-L21
509319-L21
509322-L21
576216-L21
509327-L21
500656-B21
500658-B21
500660-B21
593339-B21
Page 14
QuickSpecs
HP ProLiant BL490c Generation 6 (G6) Server Blade
Configuration Information - Factory Integrated Models
HP 4GB (1x4GB) Single Rank x4 PC3L-10600 (DDR3-1333) Registered CAS-9 Low
Power Memory Kit
NOTE: Low Voltage DIMMs can only be used with Intel Xeon 5600 series processors.
HP 8GB (1x8GB) Dual Rank x4 PC3-10600 (DDR3-1333) Registered CAS-9 Memory
Kit
HP 8GB (1x8GB) Dual Rank x4 PC3-8500 (DDR3-1066) Registered CAS-7 Memory
Kit
HP 8GB (1x8GB) Dual Rank x4 PC3L-10600 (DDR3-1333) Registered CAS-9 Low
Power Memory Kit
NOTE: Low Voltage DIMMs can only be used with Intel Xeon 5600 series processors.
HP 16GB (1x16GB) Quad Rank x4 PC3-8500 (DDR3-1066) Registered CAS-7
Memory Kit
Unbuffered with ECC DIMMs (UDIMMs)
HP 1GB (1x1GB) Single Rank x8 PC3-10600 (DDR3-1333) Unbuffered CAS-9
Memory Kit
HP 2GB (1x2GB) Dual Rank x8 PC3-10600 (DDR3-1333) Unbuffered CAS-9
Memory Kit
HP 4GB (1x4GB) Dual Rank x8 PC3-10600 (DDR3-1333) Unbuffered CAS-9
Memory Kit
NOTE: All DDR3 memory option kits consist of one DIMM per kit. For detailed
memory configuration rules and guidelines, please use the Online DDR3 Memory
Configuration Tool: www.hp.com/go/ddr3memory-configurator.
NOTE: Kits described as LP include Low Power DIMMs. For more information on
ProLiant Energy Efficient Features, see: www.hp.com/go/proliant-energy-efficient.
NOTE: PC3L is a low voltage memory.
604504-B21
500662-B21
516423-B21
604506-B21
500666-B21
500668-B21
500670-B21
500672-B21
Step 3: Choose Additional Options for Factory Integration
NOTE: For additional options, please refer to the "Core Options" and "Additional Options" section below. For additional options,
including server blade enclosures interconnect and mezzanine options and power subsystem options; please see the Core Options
and Additional Options sections below; or the following:
HP BladeSystem c3000 Enclosure QuickSpecs:
http://h18000.www1.hp.com/products/quickspecs/12790_div/12790_div.html
HP BladeSystem c7000 Enclosure QuickSpecs:
http://h18000.www1.hp.com/products/quickspecs/12810_div/12810_div.html
and HP BladeSystem c-Class Interconnect and Mezzanine Components:
http://h18004.www1.hp.com/products/blades/components/c-class-interconnects.html
http://h18004.www1.hp.com/products/blades/components/c-class-adapters.html
DA - 13236
Worldwide — Version 13 — November 15, 2010
Page 15
QuickSpecs
HP ProLiant BL490c Generation 6 (G6) Server Blade
Core Options
NOTE: Some options may not be available for factory integration. Please contact an HP sales representative for additional
information.
HP Ethernet Mezzanine
Gigabit Ethernet Mezzanines
Options
HP NC325m PCI Express Quad Port Gigabit Server Adapter
416585-B21
NOTE: If the NC325m is installed in mezzanine slot 1 of a half-height server,
connectivity will be provided on 2 of the 4 ports.
HP NC326m PCI Express Dual Port 1Gb Server Adapter
406771-B21
HP NC360m Dual Port 1GbE BL-c Adapter
445978-B21
HP NC364m Quad Port 1GbE BL-c Adapter
447883-B21
NOTE: If the NC364m is installed in mezzanine slot 1 of a half-height server,
connectivity will be provided on only 2 of the 4 ports.
HP NC382m PCI Express Dual Port Multifunction Gigabit Server Adapter
QLogic iSCSI Dual Port Adapter with Virtual Connect for c-Class BladeSystem
NOTE: The Gigabit Ethernet adapters above transmit from the server at 2000 Mbps,
full duplex per port only. For more information, see the "Network Controller" segment
in the Standards Features section.
10 Gigabit Ethernet Mezzanines
HP NC522m Dual Port 10GbE Multifunction BL-c Adapter
NOTE: The NC522m network adapter card is required for each server blade
connecting to a 10Gb interconnect in bays 3-8 (HP BladeSystem c7000 Enclosure) or
bays 3-4 (HP BladeSystem c3000 Enclosure).
NOTE: The NC522m requires a minimum of 2 GB of server memory.
NOTE: The NC522m supports linking at 1000Mbps or 10000Mbps when not
connected to a Flex-10 enabled module and will link with all current 1Gb switches at
1Gb.
HP NC532m Dual Port 10GbE BL-c Adapter
NOTE: The NC532m network adapter card is required for each server blade
connecting to a 10Gb interconnect in bays 3-8 (HP BladeSystem c7000 Enclosure) or
bays 3-4 (HP BladeSystem c3000 Enclosure).
NOTE: The NC532m requires a minimum of 2 GB of server memory.
NOTE: The NC532m supports linking at 1000Mbps or 10000Mbps when not
connected to a Flex-10 enabled module and will link with all current 1Gb switches at
1Gb.
HP NC542m Dual Port Flex-10 10GbE Multifunction BL-c Adapter
NOTE: The NC542m network adapter card is required for each server blade
connecting to a 10Gb interconnect in bays 3-8 (HP BladeSystem c7000 Enclosure) or
bays 3-4 (HP BladeSystem c3000 Enclosure).
NOTE: The NC542m requires a minimum of 2 GB of server memory.
NOTE: The NC542m supports linking at 1000Mbps or 10000Mbps when not
connected to a Flex-10 device. The NC542m will only support 1000Mbps when
connected to a 1Gb Ethernet interconnect.
HP NC550m 10GbE 2-port PCIe x8 Flex-10 Ethernet Adapter
NOTE: The NC550m network adapter card is required for each server blade
connecting to a 10Gb interconnect in bays 3-8 (HP BladeSystem c7000 Enclosure) or
bays 3-4 (HP BladeSystem c3000 Enclosure)
NOTE: The NC550m requires a minimum of 2 GB of server memory.
NOTE: The NC550m supports linking at 1000Mbps or 10000Mbps when not
DA - 13236
Worldwide — Version 13 — November 15, 2010
453246-B21
488074-B22
467801-B21
467799-B21
539857-B21
581204-B21
Page 16
QuickSpecs
HP ProLiant BL490c Generation 6 (G6) Server Blade
Core Options
connected to a Flex-10 device. The NC550m will only support 1000Mbps when
connected to a 1Gb Ethernet interconnect.
HP NC551m Dual Port FlexFabric 10Gb Converged Network Adapter
NOTE: The NC551m network adapter card is required for each server blade
connecting to a 10Gb interconnect in bays 3-8 (HP BladeSystem c7000 Enclosure) or
bays 3-4 (HP BladeSystem c3000 Enclosure)
NOTE: The NC551m requires a minimum of 2 GB of server memory.
NOTE: The NC551m supports linking at 1000Mbps or 10000Mbps when not
connected to a Flex-10 device. The NC551m supports 1000Mbps when connected to
a 1Gb Ethernet interconnect.
HP BLc NC552m Flex-10GbE Dual Port Adapter
NOTE: A 10 Gigabit Ethernet adapter is required for each server blade connecting to
a 10Gb interconnect in bays 3-8 (HP BladeSystem c7000 Enclosure) or bays 2-4 (HP
BladeSystem c3000 Enclosure).
NOTE: Each 10 Gigabit Ethernet adapter requires a minimum of 2GB of server
memory.
NOTE: A 10 Gigabit Ethernet adapter will down speed to 1Gb if paired with a 1GbE
interconnect.
NOTE: HP recommends 10Gb adapters be installed in a x8 PCIe slot for optimal
performance.
NOTE: The ROM Based Setup Utility (RBSU) feature allows for the configuring of a
FlexFabric Adapter to any of the supported protocols. For example iSCSI to FCoE
(Fibre Channel over Ethernet). Note that a HP Virtual Connect profile takes
precedence over the setting in this menu. Also, some FlexFabric Adapters may require
that network boot be enabled in order to configure the protocol. If the protocol is
configured without enabling network boot with certain FlexFabric Adapters, the
protocol may not take effect. Once the protocol has taken effect on the first boot after
configuring this option, network boot may be disabled if desired.
HP Fiber Channel
Mezzanine Options
Emulex LPe1205 8Gb Fibre Channel Host Bus Adapter for c-Class BladeSystem
Emulex LPe1105 4Gb Fibre Channel Host Bus Adapter for c-Class BladeSystem
QLogic QMH2562 8Gb Fibre Channel Host Bus Adapter for c-Class BladeSystem
QLogic QMH2462 4Gb Fibre Channel Host Bus Adapter for c-Class BladeSystem
HP BLc Brocade 804 8Gb Fibre Channel Host Bus Adapter
HP Processors
Six-Core Processors
HP BL490c G6 Intel® Xeon® X5670 (2.93GHz/6-core/95W/12MB) Processor Kit
HP BL490c G6 Intel® Xeon® X5650 (2.66GHz/6-core/95W/12MB) Processor Kit
Quad-Core Processors
HP BL490c G6 Intel® Xeon® X5570 (2.93GHz/4-core/8MB/95W) Processor Kit
HP BL490c G6 Intel® Xeon® E5540 (2.53GHz/4-core/8MB/80W) Processor Kit
HP BL490c G6 Intel® Xeon® L5530 (2.40GHz/4-core/8MB/60W) Processor Kit
HP BL490c G6 Intel® Xeon® E5504 (2.00GHz/4-core/4MB/80W) Processor Kit
DA - 13236
Worldwide — Version 13 — November 15, 2010
580151-B21
610609-B21
456972-B21
403621-B21
451871-B21
403619-B21
590647-B21
595826-B21
595827-B21
509319-B21
509322-B21
576216-B21
509327-B21
Page 17
QuickSpecs
HP ProLiant BL490c Generation 6 (G6) Server Blade
Core Options
HP Memory
Registered DIMMs (RDIMMs)
HP 2GB (1x2GB) Dual Rank x8 PC3-10600 (DDR3-1333) Registered CAS-9 Memory
Kit
HP 4GB (1x4GB) Dual Rank x4 PC3-10600 (DDR3-1333) Registered CAS-9 Memory
Kit
HP 4GB (1x4GB) Quad Rank x8 PC3-8500 (DDR3-1066) Registered CAS-7 Low
Power Memory Kit
HP 4GB (1x4GB) Single Rank x4 PC3-10600 (DDR3-1333) Registered CAS-9
Memory Kit
HP 4GB (1x4GB) Single Rank x4 PC3L-10600 (DDR3-1333) Registered CAS-9 Low
Power Memory Kit
NOTE: Low Voltage DIMMs can only be used with Intel Xeon 5600 series processors.
HP 8GB (1x8GB) Dual Rank x4 PC3-10600 (DDR3-1333) Registered CAS-9 Memory
Kit
HP 8GB (1x8GB) Dual Rank x4 PC3-8500 (DDR3-1066) Registered CAS-7 Memory
Kit
HP 8GB (1x8GB) Dual Rank x4 PC3L-10600 (DDR3-1333) Registered CAS-9 Low
Power Memory Kit
NOTE: Low Voltage DIMMs can only be used with Intel Xeon 5600 series processors.
HP 16GB (1x16GB) Quad Rank x4 PC3-8500 (DDR3-1066) Registered CAS-7
Memory Kit
Unbuffered with ECC (UDIMMs)
HP 1GB (1x1GB) Single Rank x8 PC3-10600 (DDR3-1333) Unbuffered CAS-9
Memory Kit
HP 2GB (1x2GB) Dual Rank x8 PC3-10600 (DDR3-1333) Unbuffered CAS-9
Memory Kit
HP 4GB (1x4GB) Dual Rank x8 PC3-10600 (DDR3-1333) Unbuffered CAS-9
Memory Kit
NOTE: All DDR3 memory option kits consist of one DIMM per kit. For detailed
memory configuration rules and guidelines, please use the Online DDR3 Memory
Configuration Tool: www.hp.com/go/ddr3memory-configurator.
NOTE: Kits described as LP include Low Power DIMMs. For more information on
ProLiant Energy Efficient Features, see:
http://h18004.www1.hp.com/products/servers/platforms/energyefficient/
NOTE: PC3L is a low voltage memory.
DA - 13236
Worldwide — Version 13 — November 15, 2010
500656-B21
500658-B21
500660-B21
593339-B21
604504-B21
500662-B21
516423-B21
604506-B21
500666-B21
500668-B21
500670-B21
500672-B21
Page 18
QuickSpecs
HP ProLiant BL490c Generation 6 (G6) Server Blade
Core Options
HP Hard Drives
NOTE: Hard drives have either a one year or three year warranty; refer to the specific
hard drive QuickSpecs for details.
Solid State Drives (SSD)
HP 32GB 1.5G SATA SFF (2.5-inch) Non-hot Plug Entry 3yr Warranty Solid State
Drive
HP 64GB 1.5G SATA SFF (2.5-inch) Non-hot Plug Entry 3yr Warranty Solid State
Drive
NOTE: Please see the QuickSpecs for Technical Specifications and additional
information:
http://h18000.www1.hp.com/products/quickspecs/13121_div/13121_div.html
DA - 13236
Worldwide — Version 13 — November 15, 2010
461201-B21
461203-B21
Page 19
QuickSpecs
HP ProLiant BL490c Generation 6 (G6) Server Blade
Additional Options
HP Insight software
HP Insight Control
HP Insight Control suite, No Media, Electronic License including 1 year of 24x7
Technical Support and Updates
HP Insight Control suite, No Media 1-Server License including 1 year of 24x7
Technical Support and Updates
HP Insight Software Media Kit
NOTE: Insight Software DVD media without licenses. Contains Insight Control, Insight
Dynamics and Virtual Connect Enterprise Manager. Uses an integrated installer to
perform quick and accurate software installation and updates.
NOTE: Licenses ship without media. The HP Insight Control Media Kit can be ordered
separately, or can be downloaded at: http://www.hp.com/go/insightupdates.
NOTE: Electronic licenses can be used to purchase multiple licenses with a single
activation key, and is available in all countries except China and Japan. Customers in
China and Japan should order the physical equivalent.
NOTE: Customer will receive a license entitlement certificate, which must be
redeemed online or via fax in order to obtain the license activation key(s). Includes
one year of 24 x 7 HP Software Technical Support & Update Service.
NOTE: For additional license kits, including bundles with HP BladeSystem enclosures,
please see the Insight Control QuickSpecs at:
http://h18004.www1.hp.com/products/quickspecs/12631_div/12631_div.html
HP Insight Control for Linux
HP Insight Control for Linux, 1-server license, including one year of 24x7 Technical
Support and Updates, Electronic
HP Insight Control for Linux, No Media, 1-Server license, including one year of 24x7
Technical Support and Updates
HP Insight Control for Linux, Media pack (DVD) - No licenses included
NOTE: Licenses ship without media. The Media Kit for Insight Control for Linux can be
ordered separately, or can be downloaded at: http://www.hp.com/go/ic-linux (click
on Download button).
NOTE: Electronic licenses can be used to purchase multiple licenses with a single
activation key, and are available in all countries except China and Japan. Customers
in China and Japan should order the physical equivalent.
NOTE: Customer will receive a license entitlement certificate, which must be
redeemed online or via fax in order to obtain the license activation key(s). Includes
one year of 24 x 7 HP Software Technical Support Service.
NOTE: For additional License Kits, including electronic licensing options, please see
the QuickSpecs at:
http://h18000.www1.hp.com/products/quickspecs/13019_div/13019_div.html
HP Integrated Lights-Out (iLO) Advanced for BladeSystem
HP Integrated Lights-Out (iLO) Advanced for BladeSystem, No Media, Electronic
License, including 1 year of 24x7 Technical Support and Updates
HP Integrated Lights-Out (iLO) Advanced for BladeSystem, No Media, 1-Server
License, including 1 year of 24x7 Technical Support and Updates
NOTE: Electronic licenses can be used to purchase multiple licenses with a single
activation key, and is available in all countries except China and Japan. Customers in
China and Japan should order the physical equivalent.
NOTE: Customer will receive a license entitlement certificate, which must be
DA - 13236
Worldwide — Version 13 — November 15, 2010
T9074BAE
452148-B22
436222-B21
TC213AAE
TC209A
TC208A
TA851AAE
512488-B21
Page 20
QuickSpecs
HP ProLiant BL490c Generation 6 (G6) Server Blade
Additional Options
redeemed online or via fax in order to obtain the license activation key(s). Includes
one year of 24 x 7 HP Software Technical Support Service.
NOTE: For additional license kits please see the HP Integrated Lights-Out 2
QuickSpecs at:
http://h18000.www1.hp.com/products/quickspecs/12362_div/12362_div.html
HP Insight Control server deployment
HP Insight Control server deployment Electronic License including 1 year 24x7
Technical Support and Updates
HP Insight Control server deployment 1-Server License including 1 year 24x7
Technical Support and Updates
NOTE: Licenses ship without media. The Insight Control Media Kit can be ordered
separately, or can be downloaded at: http://www.hp.com/go/insightupdates.
NOTE: Electronic licenses can be used to purchase multiple licenses with a single
activation key, and is available in all countries except China and Japan. Customers in
China and Japan should order the physical equivalent.
NOTE: Customer will receive a license entitlement certificate, which must be
redeemed online or via fax in order to obtain the license activation key(s). Includes
one year of 24 x 7 HP Software Technical Support Service.
NOTE: For additional license kits please see the Insight Control QuickSpecs at:
http://h18004.www1.hp.com/products/quickspecs/12631_div/12631_div.html
High Performance
Clusters
HP Cluster Management Utility Compute Node License
NOTE: This part number can be used to purchase one certificate for multiple licenses
with a single activation key. Each license is for one node (server). Customer will
receive a printed end user license agreement and license entitlement certificate via
physical shipment. The license entitlement certificate must be redeemed online in
order to obtain a license key.
NOTE: For additional license kits please see the QuickSpecs at:
http://h18004.www1.hp.com/products/quickspecs/12612_div/12612_div.html
HP Cluster Management Utility Media and Management License
NOTE: Order a minimum of one license per cluster to purchase media including
software and documentation, which will be delivered to the customer, and also
licenses CMU management. No license key is delivered or required.
NOTE: For additional license kits please see the QuickSpecs at:
http://h18004.www1.hp.com/products/quickspecs/12612_div/12612_div.html
HP HPC Linux Value Pack One Processor License
NOTE: This part number can be used to purchase one certificate for multiple licenses
with a single activation key. Each license is for one socket (a.k.a. processor).
Customer will receive a printed end user license agreement and license entitlement
certificate via physical shipment. The license entitlement certificate must be redeemed
online in order to obtain a license key.
NOTE: For additional license kits please see the QuickSpecs at:
http://h18004.www1.hp.com/products/quickspecs/13485_div/13485_div.html
HP HPC Linux Value Pack Media
NOTE: This part number can be used to purchase media including software and
documentation, which will be delivered to the customer.
NOTE: For additional license kits please see the QuickSpecs at:
http://h18004.www1.hp.com/products/quickspecs/13485_div/13485_div.html
DA - 13236
Worldwide — Version 13 — November 15, 2010
T9082AAE
452151-B21
436284-B21
433257-B21
TC293A
TC294A
Page 21
QuickSpecs
HP ProLiant BL490c Generation 6 (G6) Server Blade
Additional Options
HP Security - TPM
HP Trusted Platform Module Option
HP Storage Controller
HP Smart Array P700m Controller
HP Smart Array P700m/512 4-ports Ext PCIe x8 SAS Controller
HP Smart Array P700m/256 4-ports Ext PCIe x8 SAS Controller
NOTE: Please see the QuickSpecs for Technical Specifications and additional
configuration information at:
http://h18000.www1.hp.com/products/quickspecs/13175_div/13175_div.html
(Worldwide)
HP Smart Array P712m Controller
HP Smart Array P712m/ZM 2-ports Int PCIe x8 SAS Controller
NOTE: Provides RAID support on internal non-hot plug SSDs.
NOTE: Please see the QuickSpecs for Technical Specifications and additional
configuration information at:
http://h18000.www1.hp.com/products/quickspecs/13296div/13296_div.html
(Worldwide)
Optional Upgrades
HP Smart Array P-Series Low Profile Battery
NOTE: Supports HP Smart Array P700m Controller.
HP 650 mAh P-series Low Profile Battery
NOTE: Supports HP Smart Array P712m Controller.
HP 256MB P-series Cache Upgrade
NOTE: Supports HP Smart Array P712m Controller.
HP Smart Array Advanced Pack including 1yr 24x7 Technical Support and Updates
Single Server License
NOTE: A license key, a minimum of 256MB cache, and battery kit is required to
enable Smart Array Advanced Pack features. For more information go to:
http://www.hp.com/go/saap
NOTE: Please see the QuickSpecs for Technical Specifications and additional
information:
http://h18000.www1.hp.com/products/quickspecs/13201_div/13201_div.html
(Worldwide)
HP I/O Expansion
Options
HP StorageWorks 80GB IO Accelerator for BladeSystem c-Class
HP StorageWorks 160GB IO Accelerator for BladeSystem c-Class
HP StorageWorks 320GB IO Accelerator for BladeSystem c-Class
NOTE: Please see the QuickSpecs for Technical Specifications and additional
information:
http://h18000.www1.hp.com/products/quickspecs/13220_div/13220_div.html
DA - 13236
Worldwide — Version 13 — November 15, 2010
488069-B21
508226-B21
507925-B21
484299-B21
452348-B21
575031-B21
462968-B21
516471-B21
AJ876A
AJ877A
AJ878A
Page 22
QuickSpecs
HP ProLiant BL490c Generation 6 (G6) Server Blade
Additional Options
HP c-Class Mezzanine
Options
QLogic 4X QDR IB Mezzanine HCA for HP BladeSystem c-Class
HP 4X QDR IB CX2 Dual Port Mezz HCA
HP 4X DDR InfiniBand Dual Port Mezzanine HCA for c-Class BladeSystem
NOTE: Please see the QuickSpecs for Technical Specifications and additional
information:
http://h18000.www1.hp.com/products/quickspecs/12586_div/12586_div.html
HP Ultrium Tape Blades
HP StorageWorks SB1760c Tape Blade
NOTE: LTO-4 Ultrium tape technology.
HP StorageWorks SB920c Tape Blade
NOTE: LTO-3 Ultrium technology.
HP StorageWorks Ultrium 448c Tape Blade
NOTE: LTO-2 Ultrium technology.
NOTE: The HP PCI Express Mezzanine Pass-Thru Card for HP BladeSystem (431643B21) is required when installing a tape blade adjacent to a full-height server blade.
NOTE: Please see the QuickSpecs for Technical Specifications and additional
information:
http://h18000.www1.hp.com/products/quickspecs/12729_div/12729_div.html
HP StorageWorks Storage HP StorageWorks LTO-5 SB3000c Tape Blade
Blades
NOTE: Please see the QuickSpecs for Technical Specifications and additional
information:
http://h18000.www1.hp.com/products/quickspecs/12729_div/12729_div.html
(Worldwide)
HP StorageWorks SB40c Storage Blade
NOTE: Please see the QuickSpecs for Technical Specifications and additional
configuration information at:
http://h18000.www1.hp.com/products/quickspecs/12587_div/12587_div.html
(Worldwide)
HP Expansion Blade
HP BLc PCI Expansion Blade
NOTE: Ships with one pre-installed PCI-X connect board. Also includes one PCIe
connect board which requires installation.
NOTE: Please see the QuickSpecs for Technical Specifications and additional
configuration information:
http://h18000.www1.hp.com/products/quickspecs/12753_div/12753_div.html
DA - 13236
Worldwide — Version 13 — November 15, 2010
583210-B21
592519-B21
448262-B21
AQ697A
AJ401A
440947-B21
BS580A
411243-B21
448018-B21
Page 23
QuickSpecs
HP ProLiant BL490c Generation 6 (G6) Server Blade
Additional Options
HP USB and SD Options HP USB 2-Button Optical Scroll Mouse
HP USB Standard Keyboard
HP 2GB USB Flash Media Drive Key
NOTE: HP qualified blank USB key for use with HP ProLiant servers that support the
VMware virtualization environment and other HP value-add software like SmartStart.
HP recommends this industry standard USB flash device for use with VMware ESXi.
USB device must be installed in the internal slot of the ProLiant server for use with
VMware ESXi. Refer to HP VMware Getting Started Guide for installation instructions.
HP 4GB SD Flash Media
NOTE: Blank SD media devices are supported for use with VMware and Citrix. SD
media must be installed in the internal slot of the ProLiant server. Learn more at:
http://www.hp.com/go/proliantvirtualization
HP Care Pack Services
NOTE: The HP Care Pack service part numbers below for ProLiant BL c-Class server
blades, cover the server blade and all HP branded hardware options qualified for the
server, purchased at the same time or afterwards, internal to the server.
Hardware Services On-site Service
4-Hour On-site Service, 5-Day x 13-Hour Coverage, 3 Years, Electronic
4-Hour On-site Service, 7-Day x 24-Hour Coverage, 3 Years, Electronic
6-Hour Call to Repair, On-site Service, 7-Day x 24-Hour Coverage, 3 Years,
Electronic
DA - 13236
Worldwide — Version 13 — November 15, 2010
DC172B
DT528A#ABA
608447-B21
580387-B21
UK065E
UK066E
UK067E
Page 24
QuickSpecs
HP ProLiant BL490c Generation 6 (G6) Server Blade
Memory
NOTE: Memory configurations listed do not apply to "Factory Integrated Models".
Memory Population Guidelines
For detailed memory configuration rules and guidelines, please use the Online DDR3 Memory Configuration Tool:
www.hp.com/go/ddr3memory-configurator
Some DIMM installation guidelines are summarized below;
For the BL490c G6 server with eighteen (18) memory slots:
There are three (3) channels per processor; six (6) channels per server
There are three (3) DIMM slots for each memory channel; eighteen (18) total slots
Memory channel 1 consists of the three (3) DIMMs that are closest to the processor
Memory channel 3 consists of the three (3) DIMMs that are furthest from the processor
DIMM slots that are white should be populated first
Do not mix Unbuffered memory (UDIMMs) with Registered memory (RDIMMs)
Do not install DIMMs if the corresponding processor is not installed
If only one processor is installed in a 2CPU system, only half of the DIMM slots are available
To maximize performance, balance the total memory capacity between all installed processors
It is not required, but it is recommended to load the channels similarly if possible
If any Quad rank DIMMs are installed, all channels are limited to only 2 DIMMs per channel
You can only install two quad-rank DIMMs per channel
You can only install two UDIMMs per channel; the third slot in the channel must remain empty
Populate DIMMs from heaviest load (quad-rank) to lightest load (single-rank) within a channel
Heaviest load (DIMM with most ranks) within a channel goes furthest from the processor
For memory mirroring mode, channel 3 must be unpopulated. Channels 1 and 2 are populated identically
For lock-step mode, channel 3 must be unpopulated. DIMMs in channels 1 and 2 will be installed in pairs. The paired slots
will be 1,4; 2,5; 3;6 on a 3DPC system or 1,4; 2,5; on a 2DPC system
Low Voltage DIMMs can only be used with Intel Xeon 5600 series processors.
If mixing DIMM voltage is a requirement, please note that the DIMMs will run at 1.5V since all 1.35V are capable of
supporting 1.5V operations
DIMM slot/capacity/populated speed table
DIMM Type
Single
DIMM Rank
Rank (1R)
DIMM Capacity
4GB
DIMM Native Speed
1333
(MHz)
DIMM Voltage
LV/Reg
Registered DIMMS (RDIMMs)
Unbuffered with ECC DIMMs
(UDIMMs)
Single
Rank (1R)
Dual Rank (2R)
1GB
2GB
4GB
2GB
Dual Rank (2R)
4GB
8GB
8GB
Quad Rank (4R)
4GB
16GB
1333
1333
1066
1333
1066
1066
1333
1333
1333
Reg
Reg
Reg
LV/Reg
Reg
Reg
Reg
Reg
Reg
SLOTS THAT CAN BE POPULATED
18 slot servers
18
18
18
18
18
12
12
12
12
12
MAXIMUM CAPACITY (GB)
72
72
144
144
48
192
12
24
48
1333
1333*
1066
1066
1333
1333*
1066
800
1066
800
1333
1066
1333
1066
1333
1066
36
POPULATED DIMM SPEED (MHz)
1 DIMM Per Channel 1333
1333
2 DIMM Per Channel 1333*
1333*
DA - 13236
Worldwide — Version 13 — November 15, 2010
Page 25
QuickSpecs
HP ProLiant BL490c Generation 6 (G6) Server Blade
Memory
3 DIMM Per Channel 800
800
800
800
*Supported at 1333 via setting in ROM Based Setup Utility (RBSU)
NOTES:
800
n/a
n/a
n/a
n/a
n/a
PC3-10600 DIMMs have a maximum speed of 1333MHz. PC3-8500 DIMMs have a maximum speed of 1066MHz
Mixing DIMM speeds is allowed, but the system processor speed rules always override the DIMM capabilities
If you do mix DIMM speeds, the memory bus will default to the minimum clock rate of all DIMMs in the system - even if the
slower DIMM is on the other processor
If you install 1x 1066MHz DIMM in channel 1 and 1x 1333MHz DIMM in channel 2, the maximum speed will be 1066MHz
If you install 1x 1066MHz DIMM in channel 1 and 5x 1333MHz DIMMs with 1 DIMM Per Channel (DPC) in each of the other
channels, the maximum speed will be 1066MHz
If you install 3DPC in one channel (if applicable) and 1DPC in all other channels, you run at 800MHz
Maximum memory speed will also depend on the processor installed
References to the above MHz speeds are for the various speeds of DDR3 DIMMs; 1333 refers to DDR3-1333, etc
HP ProLiant BL490c G6 Server Blade DIMM slot and configuration diagrams
Basic memory slot & population diagram
Population order; start with "A" first, "B" second, "C" third, etc.
Chnl 1
slot #
1
2
3
18 DIMM SLOTS (9 per CPU node)
CPU1
CPU2
population order
slot #
population order
G
1
G
D
2
D
A
3
A
Chnl 1
Chnl 2
4
5
6
H
E
B
4
5
6
H
E
B
Chnl 2
Chnl 3
7
8
9
I
F
C
7
8
9
I
F
C
Chnl 3
HP ProLiant BL490c G6 Server Blade (1P Model)
Standard memory configuration (1 CPU model)
6GB (3 x 2GB) of PC3-10600 (DDR3-1333) RDIMMs
DA - 13236
Worldwide — Version 13 — November 15, 2010
Page 26
QuickSpecs
HP ProLiant BL490c Generation 6 (G6) Server Blade
Memory
Chnl 1
slot #
1
2
3
CPU1
population order
G: empty
D: empty
A: 2GB DIMM
slot #
1
2
3
CPU2
population order
G: empty
D: empty
A: empty
Chnl 1
Chnl 2
4
5
6
H: empty
E: empty
B: 2GB DIMM
4
5
6
H: empty
E: empty
B: empty
Chnl 2
Chnl 3
7
8
9
I: empty
F: empty
C: 2GB DIMM
7
8
9
I: empty
F: empty
C: empty
Chnl 3
Standard memory plus optional memory (1 CPU model)
54GB, consisting of three (3) 2GB RDIMMs plus six (6) 8GB RDIMMs
3x 2GB dual-rank PC3-10600 RDIMMs
6x 8GB dual-rank PC3-8500 RDIMMs
Chnl 1
slot #
1
2
3
CPU1
population order
G: 8GB DIMM
D: 8GB DIMM
A: 2GB DIMM
slot #
1
2
3
CPU2
population order
G: empty
D: empty
A: empty
Chnl 1
Chnl 2
4
5
6
H: 8GB DIMM
E: 8GB DIMM
B: 2GB DIMM
4
5
6
H: empty
E: empty
B: empty
Chnl 2
Chnl 3
7
8
9
I: 8GB DIMM
F: 8GB DIMM
C: 2GB DIMM
7
8
9
I: empty
F: empty
C: empty
Chnl 3
Standard Memory Replaced with Optional Memory (1 CPU model)
RDIMM maximum configuration
96GB, consisting of nine (6) 16GB quad-rank PC3-8500 RDIMMs
DA - 13236
Worldwide — Version 13 — November 15, 2010
Page 27
QuickSpecs
HP ProLiant BL490c Generation 6 (G6) Server Blade
Memory
Chnl 1
slot #
1
2
3
CPU1
population order
G: empty
D: 16GB DIMM
A: 16GB DIMM
slot #
1
2
3
CPU2
population order
G: empty
D: empty
A: empty
Chnl 1
Chnl 2
4
5
6
H: empty
E: 16GB DIMM
B: 16GB DIMM
4
5
6
H: empty
E: empty
B: empty
Chnl 2
Chnl 3
7
8
9
I: empty
F: 16GB DIMM
C: 16GB DIMM
7
8
9
I: empty
F: empty
C: empty
Chnl 3
UDIMM maximum configuration (1 CPU model)
24GB, consisting of six (6) 4GB dual-rank PC3-10600 UDIMMs
Chnl 1
slot #
1
2
3
CPU1
population order
G: empty
D: 4GB DIMM
A: 4GB DIMM
slot #
1
2
3
CPU2
population order
G: empty
D: empty
A: empty
Chnl 1
Chnl 2
4
5
6
H: empty
E: 4GB DIMM
B: 4GB DIMM
4
5
6
H: empty
E: empty
B: empty
Chnl 2
Chnl 3
7
8
9
I: empty
F: 4GB DIMM
C: 4GB DIMM
7
8
9
I: empty
F: empty
C: empty
Chnl 3
Standard Memory Replaced with Optional Memory (2 CPU Model)
RDIMM maximum configuration
192GB, consisting of twelve (12) 16GB quad-rank PC3-8500 RDIMMs
DA - 13236
Worldwide — Version 13 — November 15, 2010
Page 28
QuickSpecs
HP ProLiant BL490c Generation 6 (G6) Server Blade
Memory
Chnl 1
slot #
1
2
3
CPU1
population order
G: empty
D: 16GB DIMM
A: 16GB DIMM
slot #
1
2
3
CPU2
population order
G: empty
D: 16GB DIMM
A: 16GB DIMM
Chnl 1
Chnl 2
4
5
6
H: empty
E: 16GB DIMM
B: 16GB DIMM
4
5
6
H: empty
E: 16GB DIMM
B: 16GB DIMM
Chnl 2
Chnl 3
7
8
9
I: empty
F: 16GB DIMM
C: 16GB DIMM
7
8
9
I: empty
F: 16GB DIMM
C: 16GB DIMM
Chnl 3
UDIMM maximum configuration (2 CPU model)
48GB, consisting of twelve (12) 4GB dual-rank PC3-10600 UDIMMs
Chnl 1
slot #
1
2
3
CPU1
population order
G: empty
D: 4GB DIMM
A: 4GB DIMM
slot #
1
2
3
CPU2
population order
G: empty
D: 4GB DIMM
A: 4GB DIMM
Chnl 1
Chnl 2
4
5
6
H: empty
E: 4GB DIMM
B: 4GB DIMM
4
5
6
H: empty
E: 4GB DIMM
B: 4GB DIMM
Chnl 2
Chnl 3
7
8
9
I: empty
F: 4GB DIMM
C: 4GB DIMM
7
8
9
I: empty
F: 4GB DIMM
C: 4GB DIMM
Chnl 3
NOTE: Capacity references are rounded to the common Gigabyte values.
1GB = 1024MB
2GB = 2048MB
4GB = 4096MB
8GB = 8192MB
16GB = 16384MB
DA - 13236
Worldwide — Version 13 — November 15, 2010
Page 29
QuickSpecs
HP ProLiant BL490c Generation 6 (G6) Server Blade
Memory
Following are memory options available from HP:
Registered DIMMs (RDIMMs)
HP Memory
HP 2GB (1x2GB) Dual Rank x8 PC3-10600 (DDR3-1333) Registered CAS-9 Memory
Kit
HP 4GB (1x4GB) Dual Rank x4 PC3-10600 (DDR3-1333) Registered CAS-9 Memory
Kit
HP 4GB (1x4GB) Quad Rank x8 PC3-8500 (DDR3-1066) Registered CAS-7 Low
Power Memory Kit
HP 4GB (1x4GB) Single Rank x4 PC3-10600 (DDR3-1333) Registered CAS-9
Memory Kit
HP 4GB (1x4GB) Single Rank x4 PC3L-10600 (DDR3-1333) Registered CAS-9 Low
Power Memory Kit
NOTE: Low Voltage DIMMs can only be used with Intel Xeon 5600 series processors.
HP 8GB (1x8GB) Dual Rank x4 PC3-10600 (DDR3-1333) Registered CAS-9 Memory
Kit
HP 8GB (1x8GB) Dual Rank x4 PC3-8500 (DDR3-1066) Registered CAS-7 Memory
Kit
HP 8GB (1x8GB) Dual Rank x4 PC3L-10600 (DDR3-1333) Registered CAS-9 Low
Power Memory Kit
NOTE: Low Voltage DIMMs can only be used with Intel Xeon 5600 series processors.
HP 16GB (1x16GB) Quad Rank x4 PC3-8500 (DDR3-1066) Registered CAS-7
Memory Kit
Unbuffered with ECC (UDIMMs)
HP 1GB (1x1GB) Single Rank x8 PC3-10600 (DDR3-1333) Unbuffered CAS-9
Memory Kit
HP 2GB (1x2GB) Dual Rank x8 PC3-10600 (DDR3-1333) Unbuffered CAS-9
Memory Kit
HP 4GB (1x4GB) Dual Rank x8 PC3-10600 (DDR3-1333) Unbuffered CAS-9
Memory Kit
NOTE: All DDR3 memory option kits consist of one DIMM per kit. For detailed
memory configuration rules and guidelines, please use the Online DDR3 Memory
Configuration Tool: www.hp.com/go/ddr3memory-configurator.
NOTE: PC3L is a low voltage memory.
DA - 13236
Worldwide — Version 13 — November 15, 2010
500656-B21
500658-B21
500660-B21
593339-B21
604504-B21
500662-B21
516423-B21
604506-B21
500666-B21
500668-B21
500670-B21
500672-B21
Page 30
QuickSpecs
HP ProLiant BL490c Generation 6 (G6) Server Blade
Storage
1
Non Hot Plug Solid State Drive (SSD) Bay 1
2
Non Hot Plug Solid State Drive (SSD) Bay 2
Hard Drives
NOTE: Hard drives have either a one year or three year warranty; refer to the specific hard drive QuickSpecs for details.
SATA Non-Hot Plug Solid State Drives
Quantity
Position
Supported
Supported
Controller
32GB 1.5G SATA SSD
2
1-2
HP Integrated SATA Controller
HP Smart Array P712m Controller
64GB 1.5G SATA SSD
2
1-2
HP Integrated SATA Controller
HP Smart Array P712m Controller
External Storage
Quantity
Position
Supported
Host Controller or Adapter
Supported
XP Disk Array Systems
Please see the XP
External
Please see the XP Disk Array Systems Quick Specs for the latest list
Disk Array
of supported HBAs
Systems
QuickSpecs
below to
determine
configuration
requirements
HP StorageWorks XP10000 Disk Array:
http://h18006.www1.hp.com/products/storageworks/xp10000/index.html (Worldwide)
Enterprise Virtual Array
Please see the XP
External
Please see the XP Disk Array Systems Quick Specs for the latest list
Systems
Disk Array
of supported HBAs
Systems
QuickSpecs
below to
determine
configuration
requirements
DA - 13236
Worldwide — Version 13 — November 15, 2010
Page 31
QuickSpecs
HP ProLiant BL490c Generation 6 (G6) Server Blade
Storage
HP StorageWorks Enterprise Virtual Array Family:
http://h18006.www1.hp.com/products/quickspecs/12408_div/12408_div.html (Worldwide)
DA - 13236
Worldwide — Version 13 — November 15, 2010
Page 32
QuickSpecs
HP ProLiant BL490c Generation 6 (G6) Server Blade
Technical Specifications
System Unit
Dimensions (H x W x D)
(with bezel)
Weight
(approximate)
Power Specifications
7.154 x 2.19 x 20.058 in (18.17 x 5.56 x 50.95 cm)
Maximum
14.20 lb (6.44 kg)
(all hard drives and
processors installed)
Minimum
10.75 lb (4.87 kg)
(one hard drive and
processor installed)
For power specifications including Input Requirements, BTU Rating, and
Power Supply Output, please see the HP BladeSystem c-Class Enclosures
QuickSpecs located at URL:
HP BladeSystem c3000 Enclosure QuickSpecs:
http://h18000.www1.hp.com/products/quickspecs/12790_div/
12790_div.html
HP BladeSystem c7000 Enclosure QuickSpecs:
http://h18000.www1.hp.com/products/quickspecs/12810_div/
12810_div.html
To review typical system power ratings use the HP BladeSystem Power Sizer
which is available via the online tool located at URL:
http://www.hp.com/go/bladesystem/powercalculator
System Inlet Temperature Operating
10° to 35°C (50° to 95°F) at sea level with an
altitude derating of 1.0°C per every 305 m
(1.8°F per every 1000 ft) above sea level to a
maximum of 3050 m (10,000 ft), no direct
sustained sunlight. Maximum rate of change is
10°C/hr (18°F/hr). The upper limit may be
limited by the type and number of options
installed.
Relative Humidity
(non-condensing)
Altitude
Acoustic Noise
DA - 13236
System performance may be reduced if operating
with a fan fault or above 30°C (86°F).
Non-operating
-30° to 60°C (-22° to 140°F). Maximum rate of
change is 20°C/hr (36°F/hr).
Operating
10 to 90% relative humidity (Rh), 28°C (82.4°F)
maximum wet bulb temperature, noncondensing.
Non-operating
5 to 95% relative humidity (Rh), 38.7°C
(101.7°F) maximum wet bulb temperature, noncondensing.
Operating
3050 m (10,000 ft). This value may be limited by
the type and number of options installed.
Maximum allowable altitude change rate is 457
m/min (1500 ft/min).
Non-operating
9144 m (30,000 ft). Maximum allowable
altitude change rate is 457 m/min (1500 ft/min).
For acoustic noise specifications, please see the HP BladeSystem c-Class
Enclosures QuickSpecs located at URL:
Worldwide — Version 13 — November 15, 2010
Page 33
QuickSpecs
HP ProLiant BL490c Generation 6 (G6) Server Blade
Technical Specifications
HP BladeSystem c3000 Enclosure QuickSpecs:
http://h18000.www1.hp.com/products/quickspecs/12790_div/
12790_div.html
HP BladeSystem c7000 Enclosure QuickSpecs:
http://h18000.www1.hp.com/products/quickspecs/12810_div/
12810_div.html
Embedded NC532i Dual Type
Port Flex-10 10GbE
Network Processor
Multifunction Server
Data Transfer Method
Adapter
Network Transfer Rate
IEEE Compliance
Standard Features
Environment-friendly
Products and Approach
End-of-life Management
and Recycling
Integrated dual-port KR 10GbE
Broadcom 57711
x4 PCI Express Generation 2
Two ports, each at 20 Gbps full duplex; 40 Gbps aggregate full duplex
theoretical bandwidth
NOTE: Each port is autosensing 1 Gb / 10 Gb, and can interoperate with 1
Gb HP BladeSystem c-Class interconnect components.
NOTE: Each port on the NC532i adapter transmits from the server at only
20 Gbps (theoretical) full duplex.
802.1p QoS, 802.1Q VLAN tagging, 802.3ad link aggregation, 802.3ap
10GBase-KR, and 802.3x flow control
ProLiant Teaming including Network Fault Tolerance, Transmit Load
Balancing, and Switch-Assisted Load Balancing
4K Jumbo frames
Microsoft Windows Receive Side Scaling (RSS)
Optional Accelerated iSCSI
Hewlett-Packard offers end-of-life HP product return, trade-in, and recycling
programs in many geographic areas. For trade-in information, please go to:
http://www.hp.com/go/green. To recycle your product, please go to:
http://www.hp.com/go/green or contact your nearest HP sales office.
Products returned to HP will be recycled, recovered or disposed of in a
responsible manner.
The EU WEEE directive (2002/95/EC) requires manufacturers to provide
treatment information for each product type for use by treatment facilities.
This information (product disassembly instructions) is posted on the Hewlett
Packard web site at: http://www.hp.com/go/green. These instructions may
be used by recyclers and other WEEE treatment facilities as well as HP OEM
customers who integrate and re-sell HP equipment.
DA - 13236
Worldwide — Version 13 — November 15, 2010
Page 34
QuickSpecs
HP ProLiant BL490c Generation 6 (G6) Server Blade
Technical Specifications
© Copyright 2010 Hewlett-Packard Development Company, L.P.
The information contained herein is subject to change without notice.
Microsoft and Windows NT are US registered trademarks of Microsoft Corporation. Intel, the Intel logo, Xeon and Xeon Inside are
trademarks of Intel Corporation in the U.S. and other countries.
The only warranties for HP products and services are set forth in the express warranty statements accompanying such products and
services. Nothing herein should be construed as constituting an additional warranty. HP shall not be liable for technical or editorial
errors or omissions contained herein.
For hard drives, 1GB = 1 billion bytes. Actual formatted capacity is less.
DA - 13236
Worldwide — Version 13 — November 15, 2010
Page 35
Download PDF
Similar pages