NETWORKED ACCESS SOLUTIONS EDGE EVO® Solo ESHR40 & ESHRP40 Hi-O Controller/Reader Single-Door Access Control System Features: Embedded User Interface — no external software requirement Remotely managed using standard web browser. Interface to Hi-O door hardware and Hi-O compliant readers provides streamlined and smart installation. Web Browser Security — uses SSL 3.0 (Secure Socket Layer) and TLS 3.1(Transport Layer Security) to establish a secure web browser connection. Network Configuration – Works within DHCP or Static IP networks for plug and play installation, Multi Language Support — Supports the following languages: English, French, German, Spanish (International), Russian, Portuguese (Brazilian), Italian, Chinese (Simplified), Japanese, Korean, Dutch and Turkish. All-in-One UI Page — “Door Dashboard” accesses door commands, status, alarms, and recent events from all screens. Back-up and restore of data from user PC. User upgradable firmware. Manages Card only, PIN only, Card and PIN transactions. Manages up to 1000 cardholders/ credentials. Manages 8 schedules and 3 intervals each day View last 5000 events. Standardized report generation, including CSV export. First Person In (snow day) and PIN suppression schedules. Built-in 802.3af Power over Ethernet (PoE), with 8.4W available for readers, external field devices and locking hardware. Wet or dry door relays, including 12 or 24 VDC wet relay lock support. IP INTELLIGENCE AT THE DOOR WITH INTEGRATED MULTI-TECHNOLOGY READER FOR STAND-ALONE APPLICATIONS Cost-Effective – Uses Power over Ethernet (PoE) to power reader and door strike, eliminating the need for separate power supplies in many situations. Remote Management – Managed over the network through a standard web browser. No software installation necessary. Integrated Reader – The included reader/controller reads iCLASS® and HID Prox (ESHRP40) cards and opens the door; a secure side mounted door interface module places door contact in a secure area. High Security – Increased security with encrypted data exchange between controller and Hi-O devices, including readers, locks and request to exist devices. HID Global’s EDGE EVO® Solo ESHR40 and ESHRP40 Controller / Reader are cost-effective, stand-alone, single-door IP -enabled access control solutions that distribute intelligence right to the door. EDGE EVO Solo provides the ability to power all devices around a door using Power over Ethernet (PoE), significantly reducing total door installation costs by removing the need to install a separate power supply. It also utilizes less expensive CAT5 wiring compared to traditional structured cable. Because the user interfaces to the controller utilizes a standard web browser, there is no need to install software on a PC. After the controller is plugged into the local area network (LAN), it obtains its IPv4 address using DHCP or Static addressing. The user simply types the IP address into the web browser, which initiates a secure connection with the stand-alone panel. The All-in-One Door Dashboard provides a simple user interface where the site administrator can add user information, modify access rights, pull history reports, monitor door activity hidglobal.com and provide general administration of the controller. The easy-to-use user interface enables a number of simple access controller management features. The solution also enables electronic access control for sites with one or two doors and a card population of 10’s or 100’s of cards. The integrated ESHRP40 controller/ reader offers interoperability with iCLASS® credentials and existing 125 kHz HID Prox credentials. The controller/reader is mounted indoors on a US single-gang or EU/ APAC 60mm round electrical box next to the door. The controller/reader connects to Hi-O enabled devices, including Hi-O iCLASS readers, locks and push buttons, using a four-wire bus. All intelligent Hi-O compliant devices communicate bi-directionally, providing supervision and up-to-date system status information. Devices are installed in an easy–to-use plug-and-play mode, then locked down and encrypted as a last step in commissioning the door. Mounting Options: Access control readers: Controller/Reader is indoor rated only. Mount indoors on: US Single-gang style electrical box. EU/APAC 60mm round style electrical box. Includes integrated iCLASS (ESHR40) or multiCLASS (ESHRP40) Reader. Add up to 1 additional Hi-O iCLASS reader for in/out reading. Easily interfaced: Supported Hi-O Devices: Lock (can provide power over 4-wire CANbus). RJ-45 connector for Ethernet TCP/IP (10/100 Mbps). Request-to-Exit switch. Quick-disconnect screw terminal connectors. Door operator. Software updates easily provided through browser interface. Easily upgrades to a hosted software solution through the network interface. SPECIFICATIONS Model (and Part #) Mounting Holes ESHR40 (83120CKH000) US Single-gang and EU / APAC 60mm 3.3” W x 4.8” H x 1.2” D (83.9 mm x 122.2 mm x 30.5 mm) Dimensions Weight 6.3oz (180g) Housing Material Audio / Visual Indicators UL94 polycarbonate Two LEDs on RJ-45 port for network; beeper and reader LED for boot and tamper Operating Temperature 32° to 122° F (0° to 50° C) Operating Humidity Communication Ports 13.56 MHz Card Compatibility 125 kHz Card Compatibility ESHRP40 (83125CKH000) 5% to 95% relative, non-condensing Ethernet (10/100), Hi-O CANbus, Wiegand or Clock-and-Data 13.56 MHz iCLASS HID Application, ISO14443A CSN, ISO14443B CSN N/A HID Prox, Indala, AWID, EM4102 Certifications UL294 (US) Listed Component, CSA 205 (Canada), FCC Class B (US), CE: EN 300 330, EN 301 489-3, EN 50130-4 (EU), C-Tick: AS/NZS 4268 (Australia, New Zealand), IC: ICES-003 Class B (Canada), CE (EU), SRRC (China), KCC (Korea), NCC (Taiwan), iDA Singapore), RoHS Warranty Warrantied against defects in materials and workmanship for 18 months (See complete warranty policy for details). Input Power DC Input (MAX) @ PoE 14.4W (300mA @ 48VDC) DC Input (MAX) @ AUX +12VDC 18W (1500mA @ 12VDC) DC Input (MAX) @ AUX +24VDC 36W (1500mA @ 24VDC) Output Power (MAX) for total system and individual field devices An ASSA ABLOY Group brand © 2012-2014 HID Global Corporation. All rights reserved. HID, the HID logo, EDGE, EDGE EVO, and iCLASS are trademarks or registered trademarks of HID Global in the U.S. and/or other countries. All other trademarks, service marks, and product or service names are trademarks or registered trademarks of their respective owners. 2014-07-14-edge-evo-eshr40-eshrp40-rdrs-ds-en PLT-02071 DC Input @ PoE 8.4W (350mA @ 24VDC) DC Input @ AUX +12VDC 13.5W (1125mA @ 12VDC) DC Input @ AUX +24VDC 27W (1125mA @ 24VDC) Hi-O CANbus Output Voltage, DC Input = PoE 24VDC Hi-O CANbus Output Voltage, DC Input = AUX AUX +VDC Hi-O Device Compatibility Reader and Module Hi-O iCLASS R40 EDGE EVO EVM Voltage Module** Standard multiCLASS RP40 EDGE EVO EWM-M Wiegand Module North America: +1 512 776 9000 Toll Free: 1 800 237 7769 Europe, Middle East, Africa: +44 1440 714 850 Asia Pacific: +852 3160 9800 Latin America: +52 (55) 5081-1650 hid g l o b al.com NOTES: Combined power of all field devices cannot exceed “Output Power (MAX) for total system”. ** Required for Hi-O CANbus > +16VDC.