ruggednetworks.net and midsouthcable.com Info Sheet

WWW.RUGGEDNETWORKS.NET is a MidSouth Wire & Cable Co. Web Production
Email Us:
midsouthcable@aol.com or
midsouthcable@yahoo.com
Toll Free: 1-800-843-6036
International Tel# +1 336-766-1386
Winston-Salem, North Carolina 27103 USA
-------------------------------------------------VISIT OUR WEBS:
www.midsouthcable.com
www.midsouthelectronics.com
www.webnetcable.com
www.webelectrical.net
www.midsouthglobal.net
www.ruggednetworks.net
www.inetparts.com
Magnum
Magnum 6K25e
Configurable Managed Switch
Features
• Provides 4 modular slots
for user-selection of 100
Mb, 10 Mb, Gigabit ports
and 10/100 copper ports
with optional PoE
• Up to 8 Gigabit ports,
choice of SFP or GBIC or
auto-negotiating copper
connectors
• Compact 1U rack-mount
package, metal case,
regular or “reverse” case
• Power input choices: 24VDC, -48VDC, 110250VDC, dual source DC,
dual supply, and AC
• Feature-rich MNS-6K
managed switch software
with choice of GUI or CLI
Magnum ™ 6K25e enhanced Managed Switches provide greater
configurability in a rack-mount package, with up to 8 gigabit ports and/
or choices of both 100 Mb fiber and copper ports or 10 Mb fiber and
copper ports. High-capacity and high-performance Ethernet switching services are delivered in a robust 1U rack-mount package designed for the
most demanding Industrial Networking and Carrier Class applications.
The port modules allow user-selection of mixed-media fiber (all
connector types, multi- and single-mode) and 10/100 Mb RJ-45 ports,
even Power-over-Ethernet (PoE). Standard SFP or GBIC ports can be configured for a variety of Gigabit fiber cabling types and distances, as well
as 10/100/1000 copper.
A group of Magnum 6K25e Switches are ideal for the core Ethernet
services in Industrial Networks. The advanced software with security and
redundancy and ease-of-use serves applications that include other networking products such as WAN routers, small edge switches, and Serial
Device Routers. Designed for use in Industrial Plantwide LAN centers with
numerous fiber segments requiring Gigabit backbone interconnections
among network centers, the Magnum 6K25e is easy to install and operate.
High performance hardware features include non-blocking speed
on all ports and 802.1p QoS Traffic Prioritization. Software includes comprehensive security for network access and for data traffic, GarrettCom’s
IGMP-L2 multicast traffic management, and a choice of redundancy options. Magnum 6K25e’s are “plug-and-play” ready for use as backbone
switches where a mix of bursty data traffic and priority streaming traffic
for video surveillance, VoIP and even attached PoE devices are present.
The Magnum 6K25e Switches are provided with LAN software
support including SNMP management control via command line interface, RMON, SNMPc™ and Openview™ for Windows, Secure Web Management GUI, and many security features. See the Managed Networks
Software (MNS) datasheet for additional details on the comprehensive
set of software packages and options.
Magnum 6K25e Managed Switches have rugged metal cases and
Internal AC or DC power supplies, with DC dual source and dual power
supply optional. The 6K25e’s and all other Magnum products are designed
and manufactured in the USA and backed by a three year warranty.
www.ruggednetworks.net
1-800-843-6036
email:
midsouthcable@aol.com
Specifications
PERFORMANCE:
Gigabit Ports, 1000 Mb: Configurable, selection of standard SFP or GBIC
or fixed copper or fiber transceiver modules, up to 8 ports total
Fiber Ports, 100 Mb (multi-mode and single-mode): Configurable in modules,
up to 24 ports total, each FDX or HDX. Default is FDX mode.
Fiber Ports, 10 Mb: Configurable, 4 ST ports per slot. Each port may be FDX
or HDX, default is HDX mode up to 12 ports total.
RJ-45 Ports: 100 or 10 Mb speed, full- or half-duplex mode, per port,
individually determined. 10/100 auto-negotiating and auto-cross, 24 max.
PoE RJ-45 Ports: 100 or 10 Mb speed, full- or half-duplex mode, per port,
individually determined. PoE is per IEEE 802.1af. Up to 8 ports max.
All Ports non-blocking
Processing type: Store and Forward with IEEE 802.3x fdx flow control
System aggregate forward and filter rate 11.9Mpps
(24ports @ 100Mb speed, 8 ports @ Gb)
Address table: 4K nodes, self-learning, with address aging
Packet buffers: 240 KB for 10/100 and 120KB for 1000 Mb
Latency: 6μs + packet time max (TX - TX, TX - FX, FX - FX, TX-G, G-G)
NETWORK STANDARDS:
IEEE 802.3z, 802.3ab, 802.1p: 100BASE-TX, -FX, 1000BASE-SX, -LX
IEEE 802.3u Auto-negotiation on TP, IEEE802.3af on PoE
See MNS-6K datasheet for software network standards and features
OPERATING ENVIRONMENT:
IEC 60068 Operating temp. per “Type Test” -40° to 185°F (-40° to 85°C)
UL 60950 “Component Parts” temperature rating: 130°F (55°C)
Storage: -40° to 185°F (-40°to 85°C),
Ambient relative humidity: 5% to 95% (non-condensing)
Altitude: -200 to 13000ft (-60 to 4000m)
Conformal coating (humidity protection) option: Request quote
RELAY CONTACT FOR ALARMS (OPTIONAL):
Form C, one NC indicating internal power, one NC software controllable.
NETWORK CABLE CONNECTORS:
1000 Mb ports: all standard SFP, GBIC and fixed types supported
100 Mb Copper: Category 5 UTP/STP; 10 Mb: Cat. 3,4, 5 UTP/STP
100 Mb Fiber ports connector options: multi-mode FX-MTRJ, LC, ST, SC;
single-mode LC, 20Km SC, and 40Km “long reach” single-mode SC.
10 Mb Fiber port connector: multi-mode ST
AC POWER SUPPLY (INTERNAL):
AC Power Connector: IEC-type, male recessed, ON/OFF switch (optional)
Power Input, AC: 100 to 240 VAC, 47 to 63 Hz (auto ranging)
Power Consumption: 60 watts typical for a fully-loaded fiber model
30 watts typical for copper-only models
Ordering Information
Configurable Managed Switch
DC POWER SUPPLY OPTIONS:
-48VDC: Input -36 to -70VDC
24VDC: Input 20 to 40VDC
125VDC and 110VDC nominal: Input 88 to 300VDC
Std. Terminal Block: “-, GND, +”, Power Consumption: Same as AC
DC DUAL POWER SOURCE (OPTIONAL)
Magnum 6K25e & 6K25Re models may be ordered with optional Dual DC
power input, for continuity of operation when either one of the DC input
sources is interrupted. Available for -48VDC, 24VDC, or 125VDC.
POWER SUPPLIES FOR PoE (OPTIONAL)
AC, Same as AC internal but with 60 watts output @48VDC for PoE.
125DC, Same as 125DC internal but w/ 60 watts output @48VDC for PoE.
DUAL POWER SUPPLIES (OPTIONAL)
Magnum 6K25e models with 48VDC, 125VDC and 110VDC nominal, and
AC power input may be ordered with Dual Power Supplies, load-sharing
with software monitoring, for continuity of operation when either one of
the two power supplies or their associated power input is inoperative.
MECHANICAL:
Enclosure: Rugged high-strength sheet metal. Suitable for 1U rackmounting or stand-alone.
Rack-mounting brackets: 19" included; ETSI and 23" Telco optional.
Cooling Method: Fan cooled, internal @ 25cfm
Dimensions: 1.70inHx17.0inWx9.0inD (4.32cmHx 43.2cmW x 22.9cmD)
Weight: rack-mount 5.0 lbs. (2.2 kg)
LED INDICATORS PER RJ-45 PORT:
LK: On when twisted-pair link is operational.
ACT: Blinking with port activity.
FDX/HDX: ON = full-duplex mode, OFF = half-duplex mode.
100/10 ON = 100Mb speed, OFF = 10Mb
LED INDICATORS, 100 Mb and 10 Mb FIBER PORTS:
LK: Steady on when fiber link is operational.
ACT: On with port activity, FDX/HDX
AGENCY APPROVALS AND STANDARDS COMPLIANCE:
UL Listed (UL60950), cUL, CE, Emissions meet FCC Part 15, Class A
IEC 61850 EMC & Operating Conditions Class C for Power Substations
IEEE 1613 Class 2 Environmental Std for Electric Power Substations
NEBS Level 3 and ETSI Compliant; NEMA TS-2 for traffic control.
WARRANTY:
Three years
©2009 GarrettCom, Inc. Printed in United States of America Doc No. 6K25e 06/09
GarrettCom, Inc. reserves the right to change specifications, performance characteristics and/or
model offerings without notice. GarrettCom is a registered trademark of GarrettCom Inc. Magnum, Dymec, DynaStar, S-Ring, and Link-Loss-Learn are trademarks of GarrettCom, Inc. NEBS is a
registered trademark of Telcordia Technologies. UL is a registered trademark of Underwriters Labs.
Magnum 6K25e
Magnum 6K25e Managed Switch, base unit. May be configured with a selection of 10/100/1000 Mb fiber and copper connector types,
26 ports max or 8 gig ports max. A family of 38 port modules is available for essentially unlimited configuration flexibility. Wire-speed
filtering and forwarding across all ports. For licensed management software, see applicable datasheets.
Magnum 6K25Re
“Reverse” model, same as Model 6K25e except user ports and the power input connectors are in the rear. Two sets of LEDs (both rear
and front) provide duplicate status data for viewing from either side.
Configuration Options: Each Magnum 6K25e and 6K25Re base unit has four port module slots. Three (A, B, C) may be one of
the modules below, one (slot D) may only be Gb modules. Select up to 4 modules per base unit. See Configuration Guide for
additional details.
6KP8-45MT
“4+4” module for 6Ks, w/four 10/100 RJ-45 and four 100 Mb 2km multi-mode FX MTRJ connectors
6KP8-SLC
SFF Fiber module for 6K Switches, w/eight 100 Mb 15km single-mode FX LC connectors
6KP8-RJ45
TP Module for 6K Switches, w/eight 10/100 Mb auto-negotiating RJ-45 ports
6KP8-MTRJ
SFF Fiber module for 6K Switches, w/eight 100 Mb 2km multi-mode FX MTRJ connectors
6KP8-45SLC
“4+4” module for 6Ks, w/four 10/100 RJ-45 and four 100 Mb 20km single-mode FX LC connectors
6KP6-RJMST
“4+2” module for 6Ks, w/four 10/100 RJ-45 and two 100 Mb 2km multi-mode FX ST connectors
6KP4-F10ST
“2+2” 10 Mb fiber module for 6K Switches, with four 10 Mb 2km FL ST connectors
6KP6-RJSSC
“4+2” module for 6Ks, w/four 10/100 RJ-45 and two 100 Mb 20km single-mode FX SC connectors
6KP6-RJSSCL
“4+2” module for 6Ks, w/four 10/100 RJ-45 and two 100 Mb 40km single-mode FX SC connectors
6KP6-RJ10ST
“4+2” module for 6Ks, w/four 10/100 RJ-45 and two 10 Mb 2km FL ST connectors
6KP4-FXSC
“2+2” 100 Mb Fiber module for 6K Switches, w/four 100 Mb FX SC connectors.
6KP4-F10ST
“2+2”10 Mb fiber module for 6K Switches, w/four 10Mb 2km FL ST connectors
Note: Several other Port Module types are available. See Configuration Guide.
6KP7-1GSFP6RJ
“G+6” module for 6Ks, w/one SFP Gigabit Port and six 10/100 Mb RJ45 ports
6KP7-1G2RJ4MLC
“G+4+2” module for 6Ks, w/one SFP Gigabit Port, four multi-mode LC fiber ports, and two 10/100 RJ-45
6KP7-1G2RJ4SLC
“G+4+2” module for 6Ks, w/one SFP Gigabit Port, four single-mode LC fiber ports, and two 10/100 RJ-45
6KP7-1G2RJ4SLCL
6KP2-2GSX
6KE-2GCU
Made in USA
“G+4+2” module for 6Ks, w/one SFP Gb Port, four sgl-mode long-haul LC fiber ports, and two 10/100 RJ-45
Two-port one-slot Gigabit 6K module for 6K Switches, uses one 6K slot and provides two Gigabit Fiber
SXSC (1000BASE-SX multi-mode) ports. Includes front-panel sheet metal cover.
Two-port one-slot Gigabit 6K module for 6K Switches, uses one 6K slot and provides two Gigabit Copper (1000BASET) auto-negotiating ports. Includes front-panel sheet metal cover.
GarrettCom, Inc.
47823 Westinghouse Drive
Fremont, CA 94539
PH: (510) 438-9071
FAX: (510) 438-9072
Email: mktg@garrettcom.com
Web: www.GarrettCom.com
Magnum 6K25e and 6K25Re Configuration Guide
Magnum 6K25e and 6K25Re (Reverse Rack-Mount) Managed Switches. May be configured with a
selection of 10/100/1000 6K fiber and copper port connector types, 26 total ports max.
Note: MNS-6K and MNS-6K-SECURE software are licensed for use on 6K Switches.
Step 1. Choose 6K25e or 6K25Re chassis and power input type:
Model #
Model #
Base Unit, Description
6K25Re
Reverse mount with AC Power
6K25Re-24VDC
Reverse mount with 24V (18-36) DC power
6K25Re-48VDC
Reverse mount with -48V (36-70) DC power
6K25Re-125VDC
Reverse mount with 125V (88-300) DC power
6K25Re-2AC
Reverse mount w/ 2 internal AC power supplies
6K25Re-2DC125
Reverse mount with 2 internal 125 DC power
Base Units continued…
6K25e
Front mount with AC Power
6K25e-24VDC
Front mount with 24V (18-36) DC power
6K25e-48VDC
Front mount with -48V (36-70) DC power
6K25e-125VDC
Front mount with 125V (88-300) DC power
Step 2. Choose 1 module for slots A, B & C (some may be blank)
Note: If PoE module is desired, see PoE Configuration Guide:
Module Model #
10/
100
6KP8-RJ45
8
6KP8-45-2MT
6
6KP8-45-2SLC
6
6KP6-RJ10ST
4
10BASE- 100BASEFL
FX(MM)
100BASEFX(SM)
Gigabit
Step 3. Slot D: For Gb, choose module from list below:
Module Model #
2 (MTRJ)
6KE-2GSFP
2 (20km LC)
6KE-2GCU
2 (ST)
6KP6-RJMST
4
2 (ST)
6KE-2GCUSFP
6KP6-RJMSC
4
2 (SC)
6KE-1GSFP
6KP6-RJSSC
4
6KP6-RJSSCL
4
6KP8-45MT
4
4 (MTRJ)
6KP8-45MLC
4
4 (LC)
6KP8-45SLC
4
2 (40kmSC)
GBPM-DOTX
4 (ST)
6KP4-FLSTFX
2 (ST)
2 (ST)
6KP4-FXST
4 (ST)
6KP4-FXSC
4 (SC)
2 (ST)
4 (MTRJ)
6KP8-MTRJ
8 (MTRJ)
6KP8-MLC
8 (LC)
2 SFP
2 CU
1CU, 1SFP
1 SFP
1 CU
1 GBIC
Step 4 (Opt) Choose GBICs or SFPs for Gig Ports
4 (20km LC)
6KP4-F10ST
6KP6-MT10ST
2 (20kmSC)
6KE-1GCU
Gigabit
Model #
Description (Ports for
GBPM-COTX / 6KP5-G4RJ/ 6KP3-G2SC)
GBIC-SXSC
One 1000BASE-SX port with m.m. SC fiber
GBIC-LXSC10
One 1000BASE-LX/LH port 1310nm s.m. SC 10Km
GBIC-LXSC25
One 1000BASE-LX/LH port 1310nm s.m. SC 25Km
GBIC-TP
One IEEE 802.3ab TP port, RJ-45 connector
GBIC-ZXSC40
One 1000BASE-ZX port 1550nm s.m. SC 40Km
GBIC-ZXSC70
One 1000BASE-ZX port 1550nm s.m. SC 70Km
Gb SFP fiber optic transceivers
SFP-GTP
Gb Copper
SFP-SX
Gb SX, 850nm wavelength, 550 meters distance
1 GBIC
SFP-ESX
Gb SX, 1310nm wavelength, 2km distance
GBPM-COTX
1 GBIC
SFP-LX10
Gb LX, 1310nm wavelength, 10km distance
GBPM-2OTX
2 GBIC
SFP-LX25
Gb LX, 1310nm wavelength, 25km distance
SFP-ZX40
Gb ZX, 1550nm wavelength, 40km distance
SFP-ZX70
Gb ZX, 1550nm wavelength, 70km distance
6KP8-SLC
8 (20km LC)
Gigabit Modules using GBICs (see Step 3)
6KP3-G2SC
2 (SC)
Gigabit Modules, fixed ports
6KP2-2GSX
2 SX
2 CU
Step 5. Choose options & extras:
1 CU
Model #
Description
6KM-BLNK
Blank cover for 1 unused (A) module slot
DUAL-SRC
Two separate power inputs (24/ 48/ or 125V)
ALARM-TERMBLK
Alarm contacts, 1 power and 1 software
S-RING-KEY
Software, self-healing ring management
1CU, 1SFP
RMB-23W
23” ‘Telco’ rack-mount kit (1U)
6KP1-1GSFP
1 SFP
RMB-ETSI
ETSI rack-mount kit (1U)
6KP1-1GCU
1 CU
CONSOLE-CBL
Console attachment cable serial null Modem
(aka X-modem) cable with DB9 connectors
CONSOLE-USB
As above, but with a USB connector
CONFORMAL-CR
Conformal coating – request quote
6KP2-2GCU
6KP3-1CU2FXT
2 (ST)
Gigabit Modules, fixed ports—Using Small form factor (SFP) transceivers
6KP7-1G2RJ4MLC, 6KP7-1G2RJ4SLC, 6KP7-1G2RJ4SLCL w/ 1 SFP Gb port,
2 10/100 RJ45 & 4 m-mode, sgl-mode or "long haul" sgl-mode fiber
6KP7-1GSFP6RJ
6
1 SFP
6KP2-2GSFP
2 SFP
6KP2-1GSFP1CU
1-800-843-6036
email:
midsouthcable@aol.com
or
midsouthcable@yahoo.com
Download PDF
Similar pages