2018
Alpine® Radio
SECTION
TABLE OF CONTENTS
PAGE
1
SAFETY GUIDELINES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
1
2
GETTING STARTED . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
2
3
RADIO . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
3
4
RBDS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
4
5
CD/MP3/WMA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
5
6
SOUND SETTING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
6
7
SETUP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67
7
8
BLUETOOTH HANDS FREE CALLING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 77
8
9
ACCESSORIES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 97
9
10
SIRIUSXM SATELLITE RADIO OPERATION — IF EQUIPPED . . . . . . . . . . . . . . . . . . . . . . . . 115
10
11
ADDITIONAL INFORMATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 133
11
SAFETY GUIDELINES
CONTENTS
䡵 WARNINGS/CAUTIONS/PRECAUTIONS . . . . . .4
䡵 CYBERSECURITY . . . . . . . . . . . . . . . . . . . . . . .13
1
4 SAFETY GUIDELINES
WARNINGS/CAUTIONS/PRECAUTIONS
WARNING!
Always drive safely with your hands on the steering
wheel and obey all applicable laws. You have full
responsibility and assume all risks related to the use
of the features and applications in this vehicle. Only
use the features and applications in this vehicle
when it is safe to do so. Failure to do so may result in
an accident involving in serious injury or death.
WARNING
accident. LISTENING AT LOUD VOLUME LEVELS IN A
CAR MAY ALSO CAUSE HEARING DAMAGE.
DO NOT DISASSEMBLE OR ALTER.
Doing so may result in an accident, fire or electric shock.
USE ONLY IN CARS WITH A 12 VOLT NEGATIVE
GROUND.
(Check with your dealer if you are not sure.) Failure to do
so may result in fire, etc.
KEEP SMALL OBJECTS SUCH AS BATTERIES OUT
OF THE REACH OF CHILDREN.
This symbol means important instructions. Failure to Swallowing them may result in serious injury. If swallowed, consult a physician immediately.
heed them can result in serious injury or death.
Glance at screen only when safe to do so. If prolonged USE THE CORRECT AMPERE RATING WHEN REviewing of the screen is required, park in a safe location PLACING FUSES.
and set the parking brake
Failure to do so may result in fire or electric shock.
KEEP THE VOLUME AT A LEVEL WHERE YOU CAN
STILL HEAR OUTSIDE NOISES WHILE DRIVING.
DO NOT BLOCK VENTS OR RADIATOR PANELS.
Doing so may cause heat to build up inside and may
Excessive volume levels that obscure sounds such as result in fire.
emergency vehicle sirens or road warning signals (train
crossings, etc.) can be dangerous and may result in an
SAFETY GUIDELINES 5
USE THIS PRODUCT FOR MOBILE 12 VOLT APPLICATIONS.
PRECAUTIONS
Product Cleaning
Use for other than its designed application may result in
Use a soft dry cloth for periodic cleaning of the product.
fire, electric shock or other injury.
For more severe stains, please dampen the cloth with
DO NOT PLACE HANDS, FINGERS OR FOREIGN water only. Anything else has the chance of dissolving
the paint or damaging the plastic.
OBJECTS IN INSERTION SLOTS OR GAPS.
Doing so may result in personal injury or damage to the Temperature
product.
Ensure the temperature inside the vehicle is between
CAUTION
+140° F (+60° C) and +14° F (–10° C) before turning your
This symbol means important instructions. Failure to unit on.
heed them can result in injury or material property Moisture Condensation
damage.
You may notice the CD playback sound wavering due to
HALT USE IMMEDIATELY IF A PROBLEM APPEARS. condensation. If this happens, remove the disc from the
Failure to do so may cause personal injury or damage to player and wait about an hour for the moisture to
the product. Return it to your authorized Alpine dealer evaporate.
or the nearest Alpine Service Center for repairing.
Damaged Disc
Do not attempt to play cracked, warped, or damaged
discs. Playing a bad disc could severely damage the
playback mechanism.
1
6 SAFETY GUIDELINES
Maintenance
Inserting Discs
If you have problems, do not attempt to repair the unit Your player accepts only one disc at a time for playback.
yourself. Return it to your Alpine dealer or the nearest Do not attempt to load more than one disc.
Alpine Service Station for servicing.
Ensure the label side is facing up when you insert the
Never Attempt the Following
disc. “Error” will be displayed on your player if you
insert a disc incorrectly. If “Error” continues to be disDo not grip or pull out the disc while it is being pulled
played even though the disc has been inserted correctly,
back into the player by the automatic reloading mechapush the RESET switch with a pointed object such as a
nism. Do not attempt to insert a disc into the unit when
ballpoint pen.
the unit power is off.
Playing a disc while driving on a very bumpy road may
result in skips, but this will not scratch the disc or
damage the player.
New Discs
To prevent the CD from jamming, “Error” is displayed if
discs with irregular surfaces are inserted or if discs are
inserted incorrectly. When a new disc is ejected immediately after initial loading, use your finger to feel around
the inside of the center hole and outside edge of the disc.
If you feel any small bumps or irregularities, this could
inhibit proper loading of the disc. To remove the bumps,
rub the inside edge of the hole and outside edge of the
disc with a ballpoint pen or other such instrument, then
insert the disc again.
SAFETY GUIDELINES 7
1
Irregular Shaped Discs
Installation Location
Be sure to use round discs only for this unit and never Ensure this unit will not be installed in a location
use any special shaped discs.
subjected to:
Use of anything but round discs may cause damage to • Direct sun and heat
the mechanism.
• High humidity and water
• Excessive dust
• Excessive vibrations
8 SAFETY GUIDELINES
Correct Handling
Disc Cleaning
Do not drop the disc while handling. Hold the disc so
you will not leave fingerprints on the surface. Do not
affix tape, paper, or gummed labels to the disc. Do not
write on the disc.
Fingerprints, dust, or soil on the surface of the disc could
cause the CD player to skip. For routine cleaning, wipe
the playing surface with a clean, soft cloth from the center
of the disc to the outer edge. If the surface is heavily
soiled, dampen a clean, soft cloth in a solution of mild
neutral detergent before cleaning the disc.
SAFETY GUIDELINES 9
Disc Accessories
On handling Compact Discs (CD/CD-R/CD-RW)
There are various accessories available on the market for
protecting the disc surface and improving sound quality.
However, most of them will influence the thickness
and/or diameter of the disc. Using such accessories can
cause the disc to be out of standard specifications and
may create operational problems. We recommend not
using these accessories on discs played in Alpine CD
players.
• Do not touch the surface.
• Do not expose the disc to direct sunlight.
• Do not affix stickers or labels.
• Clean the disc when it is dusty.
• Make sure that there are no bumps around the disc.
• Do not use commercially available disc accessories.
Do not leave the disc in the car or the unit for a long
time. Never expose the disc to direct sunlight. Heat and
humidity may damage the CD and you may not be able
to play it again.
To customers using CD-R/CD-RW
• If a CD-R/CD-RW cannot be played back, make sure
the last recording session was closed (finalized).
• Finalize the CD-R/CD-RW if necessary, and attempt
playback again.
1
10 SAFETY GUIDELINES
• Some of the following CDs may not play on this unit:
Flawed CDs, CDs with fingerprints, CDs exposed to
Use only compact discs with the label side showing the
extreme temperatures or sunlight (e.g., left in the car or
CD logo marks below.
this unit), CDs recorded under unstable conditions,
CDs on which a recording failed or a re-recording was
attempted, copy-protected CDs which do not conform
to the audio CD industry standard.
About media that can be played
• Use discs with MP3/WMA/AAC files written in a
format compatible with this unit. For details, refer to
“About MP3/WMA/AAC” on page 32.
• ROM data other than audio files contained in a disc
will not produce sound when played back.
Protecting the USB connector
• Only a Flash Memory or iPod/iPhone can be connected to the USB port on this unit. Correct performance using other USB products cannot be guaranteed.
You can play CD-Rs (CD-Recordables)/CD-RWs (CDReWritables) which have been recorded only on audio
• If the USB connector is used, be sure to use a USB
devices.
extension cable (supplied). A USB hub is not
supported.
You can also play CD-Rs/CD-RWs containing MP3/
WMA/AAC formatted audio files.
If you use unspecified compact discs, correct performance cannot be guaranteed.
SAFETY GUIDELINES 11
• Depending on the connected Flash Memory device, • Fix the Flash Memory in a location where driver
operation will not be hindered.
the unit may not function or some functions may not
be performed.
• Flash Memory may not function correctly at high or
low temperature.
• The audio file format that can be played back on the
unit is MP3/WMA/AAC.
• Use only certified Flash Memory. Pay attention that
even certified Flash Memory, may not function cor• Artist/song name, etc., can be displayed. Certain,
rectly depending on its type or state.
special characters may not be correctly displayed.
On Handling Flash Memory
CAUTION!
Alpine accepts no responsibility for lost data, etc.,
even if data, etc. is lost while using this product.
• Flash Memory function is not guaranteed. Use Flash
Memory according to the terms of agreement.
• Depending on the settings of the Flash Memory type,
memory state or encoding software, the unit may not
play back or display properly.
• A file that is copy-protected (copyright protection)
• To prevent malfunction or damage, note the following
cannot be played back.
points. Read the Flash Memory Owner’s Manual thoroughly. Do not touch the terminals by hand or metal. • Flash Memory may take time to start playback. If there
is a particular file other than audio in the Flash
Do not subject Flash Memory to excessive shock. Do
Memory, it may take considerable time before the file
not bend, drop, disassemble, modify or soak in water.
is played back or searched.
• Avoid usage or storage in the following locations:
Anywhere in the car exposed to direct sunlight or high • The unit can play back “mp3”, “wma” or “m4a” file
extensions.
temperatures. Anywhere the possibility of high humidity or corrosive substances are present.
1
12 SAFETY GUIDELINES
• Do not add the above extensions to a file other than
audio data. This non-audio data will not be recognized. The resulting playback may contain noise that
can damage speakers and/or amplifiers.
• It is recommended to back up important data on a
personal computer.
• Windows Media and the Windows logo are trademarks,
or registered trademarks of Microsoft Corporation in the
United States and/or other countries.
• iPhone, iPod, iPod classic, iPod nano, and iPod touch
are trademarks of Apple Inc., registered in the U.S. and
other countries.
• “Made for iPod,” and “Made for iPhone,” mean that
an electronic accessory has been designed to connect
specifically to iPod, or iPhone, respectively, and has
been certified by the developer to meet Apple performance standards. Apple is not responsible for the
operation of this device or its compliance with safety
and regulatory standards. Please note that the use of
this accessory with iPod, or iPhone may affect wireless
performance.
• The Bluetooth word mark and logos are registered
trademarks owned by the Bluetooth SIG, Inc. and any
use of such marks by Alpine Electronics, Inc. is under
license. Other trademarks and trade names are those of
their respective owners.
• MPEG Layer-3 audio coding technology licensed
from Fraunhofer IIS and Thomson. Supply of this
product only conveys a license for private, noncommercial use and does not convey a license nor
imply any right to use this product in any commercial
(i.e. revenue-generation) real time broadcasting (terrestrial, satellite, cable and/or any other media),
broadcasting/streaming via internet, intranets and/or
other networks or in other electronic content distribution systems, such as pay-audio or audio-on-demand
applications. An independent license for such use is
required. For details, please visit http://
www.mp3licensing.com
• HD Radio Technology manufactured under license
from iBiquity Digital Corporation. U.S. and Foreign
Patents. HD Radio and the HD, HD Radio, and “Arc”
logos are proprietary trademarks of iBiquity Digital
Corp.
SAFETY GUIDELINES 13
• Pandora, the Pandora logo, and the Pandora trade
dress are trademarks or registered trademarks of
Pandora Media, Inc., used with permission. Pandora is
currently available exclusively in the United States.
• Sirius, XM and all related marks and logos are
trademarks of Sirius XM Radio Inc. All rights reserved.
• Android is a trademark of Google Inc.
software updates to improve the usability and performance of your systems or to reduce the potential risk of
unauthorized and unlawful access to your vehicle systems.
The risk of unauthorized and unlawful access to your
vehicle systems may still exist, even if the most recent
version of vehicle software (such as Uconnect software) is
installed.
CYBERSECURITY
Your vehicle may be a connected vehicle and may be
equipped with both wired and wireless networks. These
networks allow your vehicle to send and receive information. This information allows systems and features in
your vehicle to function properly.
Your vehicle may be equipped with certain security
features to reduce the risk of unauthorized and unlawful
access to vehicle systems and wireless communications.
Vehicle software technology continues to evolve over
time and FCA US LLC, working with its suppliers,
evaluates and takes appropriate steps as needed. Similar
to a computer or other devices, your vehicle may require
WARNING!
• It is not possible to know or to predict all of the
possible outcomes if your vehicle’s systems are
breached. It may be possible that vehicle systems,
including safety related systems, could be impaired or a loss of vehicle control could occur that
may result in an accident involving serious injury
or death.
(Continued)
1
14 SAFETY GUIDELINES
WARNING! (Continued)
• ONLY insert media (e.g., USB, SD card, or CD) into
your vehicle if it came from a trusted source. Media
of unknown origin could possibly contain malicious software, and if installed in your vehicle, it
may increase the possibility for vehicle systems to
be breached.
• As always, if you experience unusual vehicle behavior, take your vehicle to your nearest authorized
dealer immediately.
• To help further improve vehicle security and minimize
the potential risk of a security breach, vehicle owners
should:
check
www.driveuconnect.com/
• Routinely
software-update to learn about available Uconnect
software updates.
• Only connect and use trusted media devices (e.g.
personal mobile phones, USBs, CDs).
Privacy of any wireless and wired communications cannot be assured. Third parties may unlawfully intercept
information and private communications without your
NOTE:
consent. For further information, refer to “Onboard Di• FCA or your dealer may contact you directly regarding agnostic System (OBD II) Cybersecurity” in “Getting To
Know Your Instrument Panel” in your Owner’s Manual.
software updates.
GETTING STARTED
2
CONTENTS
䡵 GETTING STARTED. . . . . . . . . . . . . . . . . . . . . .16
▫ Adjusting Volume . . . . . . . . . . . . . . . . . . . . . .19
▫ Turning Power On And Off . . . . . . . . . . . . . . .16
▫ Setting The Dimmer Control. . . . . . . . . . . . . . .19
▫ Source Selection . . . . . . . . . . . . . . . . . . . . . . .17
▫ Setting The Time . . . . . . . . . . . . . . . . . . . . . .19
▫ Detaching And Attaching The Front Panel . . . . .17
▫ Controllable With Remote Control . . . . . . . . . .20
▫ Initial System Start-Up. . . . . . . . . . . . . . . . . . .18
16 GETTING STARTED
GETTING STARTED
WARNING!
Always drive safely with your hands on the steering
wheel and obey all applicable laws. You have full
responsibility and assume all risks related to the use
of the features and applications in this vehicle. Only
use the features and applications in this vehicle
when it is safe to do so. Failure to do so may result in
an accident involving in serious injury or death.
1
2
3
4
— AUDIO/SETUP
— Rotary Encoder
/ENTER Button
—
— DIM
5 — BACK/POWER BUTTON
6 — SOURCE
7 — EJECT BUTTON
Turning Power On And Off
Press
to turn on the unit.
NOTE:
• The unit can be turned on by pressing any other button
.
except
GETTING STARTED 17
•
/SOURCE key blinks each time the unit is *5 Displayed only when the AUX IN is set to ON, refer to
“Setting The AUX SETUP Mode” on page 70.
powered on.
Press and hold
unit.
for at least 2 seconds to turn off the Detaching And Attaching The Front Panel
Detaching
NOTE:
1. Turn off the unit power.
• The first time power is turned on, the volume will start
(OPEN) to open the front panel.
2. Press
from level 12.
To close the front panel, press the left side until it
Source Selection
locks.
Push
/SOURCE to change the source.
HD Radio → SiriusXM*1 → Disc → USB/iPod*2 →
BLUETOOTH Audio*3 → PANDORA*4 → Auxiliary*5 →
HD Radio
*1 Displayed only when a SiriusXM Tuner is connected.
*2 Displayed only when the iPod/iPhone is connected.
*3 Displayed only when Bluetooth IN is set to ON, refer
to “Setting The BLUETOOTH Connection (Bluetooth
IN)” on page 82.
*4 Not displayed when Alpine APP is set to OFF, refer to
“Setting The Communication Mode With A Smartphone 1 — EJECT Button
(Alpine APP)” on page 75.
2 — Pull Radio Outward
2
18 GETTING STARTED
3. Grasp the front panel firmly, slide to the left (1), and
then pull to remove (2).
NOTE:
• The front panel may become hot in normal usage
(especially the connector terminals on the back of the
front panel). This is not a malfunction.
• To protect the front panel, place it in the supplied
carrying case.
• When detaching the front panel, do not apply excessive force as it may result in a malfunction.
NOTE:
• Do not leave the front panel open, or drive the car with
the panel open as it may result in an accident or • Before attaching the front panel, make sure that there
is no dirt or dust on the connector terminals and no
malfunction.
foreign objects between the front panel and the main
Attaching
unit.
1. Insert the right side of the front panel into the main
• Attach the front panel carefully, holding the sides of
unit. Align the groove on the front panel with the
the front panel to avoid pushing buttons by mistake.
projections on the main unit (1).
Initial System Start-Up
2. Push the left side of the front panel until it locks firmly
NOTE: Be sure to press the RESET button when using the
into the main unit (2).
unit for the first time, after changing the car battery, or
using the battery disconnect (anytime the vehicle loses
power).
GETTING STARTED 19
To reset the system, perform the following procedure:
Setting The Dimmer Control
1. Turn off the unit.
Press and hold DIM for at least two seconds to select the
DIMMER mode.
(OPEN) to open the front panel, and then
2. Press
DIMMER AUTO → DIMMER ON → DIMMER OFF →
remove it.
DIMMER AUTO
3. Press RESET button (1) with a ballpoint pen or similar
DIMMER AUTO Mode:
pointed object.
Decrease the illumination of the unit’s buttons while the
vehicle headlights are ON. The unit’s backlighting will
decrease with headlight usage.
DIMMER ON Mode:
Keep the illumination of the backlighting dimmed.
DIMMER OFF Mode:
Keep the illumination of the backlighting bright.
Adjusting Volume
NOTE: The setting items are the same as DISPLAY
setting in SETUP mode. For details, refer to “Dimmer
Control”.
Setting The Time
Turn the Rotary encoder until the desired sound level is
1. Press and hold AUDIO/SETUP for at least two secobtained.
onds to activate the SETUP selection mode.
2
20 GETTING STARTED
2. Turn the Rotary encoder to select the General mode, Controllable With Remote Control
/ENTER.
and then press
This unit can be controlled with an optional Alpine
3. Turn the Rotary knob to select Clock Adjust, and then remote control. For details, consult your Alpine dealer.
Point the optional remote control transmitter at the
/ENTER. The time indication will blink.
press
remote-control sensor (1).
4. Turn the Rotary knob to adjust the hours while the
time indication is blinking.
5. Press
/ENTER.
6. Turn the Rotary knob to adjust the minutes while the
time indication is blinking.
7. Press and hold AUDIO/SETUP for at least two seconds to return to normal mode.
NOTE:
• To synchronize the clock to another clock/watch or
/ENTER
radio time announcement, press and hold
Remote Control Sensor
for at least two seconds after setting the “hour.”
Minutes will reset to 00. If the display shows over Connectable to Remote Control Interface Box
“30” minutes when you do this, the time will
With an optional Alpine Steering Wheel Remote Control
advance one hour.
Interface Box, this unit is controllable from the vehicles
steering wheel controls. For details, contact your Alpine
• Pressing
returns to the previous SETUP mode.
dealer.
• If no operation is performed for 60 seconds, SETUP is
canceled.
RADIO
CONTENTS
䡵 RADIO . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .22
▫ Presetting Stations Automatically . . . . . . . . . . .24
▫ Listening To Radio . . . . . . . . . . . . . . . . . . . . .23
▫ Tuning To Preset Stations . . . . . . . . . . . . . . . . .24
▫ Presetting Stations Manually . . . . . . . . . . . . . .23
▫ Frequency Search Function. . . . . . . . . . . . . . . .24
3
22 RADIO
RADIO
WARNING!
Always drive safely with your hands on the steering
wheel and obey all applicable laws. You have full
responsibility and assume all risks related to the use
of the features and applications in this vehicle. Only
use the features and applications in this vehicle
when it is safe to do so. Failure to do so may result in
an accident involving in serious injury or death.
1
2
3
4
5
— SOURCE
—
/ENTER
— Rotary Encoder
Fast Forward
—
— Preset Buttons (1 — 6)
6
7
8
9
—
Fast Rewind
— Tune/A.ME
— Back Button
— BAND Select Button
Depending on the Listen Mode setting, this unit will tune
to either the Digital or Analog signals. For details, please
refer to “Switching The Listening Mode”.
RADIO 23
Listening To Radio
1. Press
/SOURCE to select Radio mode.
4. Press
or
Holding down
continuously.
to tune in the desired station.
or
will change the frequency
2. Press BAND repeatedly until the desired radio band is
Presetting Stations Manually
displayed.
FM1 → FM2 → AM → FM1
3. Press TUNE/A.ME to select the tuning mode.
1. Select the radio band and tune in a desired radio
station you wish to store in the preset memory.
DX (Distance mode) → LOCAL (Local mode) → 2. Press and hold, for at least two seconds, any one of the
preset buttons (1 through 6) into which you wish to
MANUAL (Manual mode) → DX
store the station.
NOTE:
The display shows the band, preset number and
station frequency memorized.
• The initial mode is Distance mode.
Distance mode:
NOTE:
Both strong and weak stations will be automatically • A total of 18 stations can be stored in the preset
tuned in (Automatic Seek Tuning).
memory (6 stations for each band; FM1, FM2 and AM).
Local mode:
• If you store a station in a preset memory which already
has a station, the current station will be cleared and
Only strong stations will be automatically tuned in
replaced with the new station.
(Automatic Seek Tuning).
Manual mode:
The frequency is manually tuned in steps (Manual tuning).
3
24 RADIO
Presetting Stations Automatically
The display shows the band, preset number and
frequency of the station selected.
1. Press BAND repeatedly until the desired radio band is
displayed.
Frequency Search Function
2. Press and hold TUNE/A.ME for at least two seconds. You can search for a radio station by its frequency.
The frequency on the display continues to change 1. Press
/ENTER in Radio mode to activate the
while the automatic memory is in progress. The tuner
search mode.
will automatically seek and store 6 strong stations in
2. Turn the Rotary encoder to select the desired frethe selected band. They will be stored into preset
quency. *
buttons 1 to 6 in order of signal strength. When the
* Operation is not required when Listen Mode is set to
automatic memory has been completed, the tuner goes
Analog (refer to “Switching The Listening Mode”).
to the station stored in preset location No.1.
NOTE:
3. Turn the Rotary knob to select the desired frequency.
/ENTER to receive the selected frequency.
• If no stations are stored, the tuner returns to the station 4. Press
you were listening to before the auto memory proce- NOTE:
dure began.
in the search mode to cancel. Or, the search
• Press
Tuning To Preset Stations
mode will be canceled if no operation is performed
for 60 seconds.
1. Press BAND repeatedly until the desired band is
displayed.
2. Press any one of the station preset buttons (1 through
6) that has your desired radio station in memory.
RBDS
CONTENTS
䡵 RBDS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .26
▫ PTY (Program Type) Tuning . . . . . . . . . . . . . . .26
▫ Displaying Radio Text . . . . . . . . . . . . . . . . . . .26
4
26 RBDS
2. Turn the Rotary encoder to select PTY SELECT, and
then press
/ENTER.
RBDS
The RBDS (Radio Broadcast Data System) is a radio
information system.
3. Turn the Rotary encoder to choose the desired program type while the PTY (program type) is being
displayed.
/ENTER after selecting the program type
4. Press
to start searching for a station in the selected
program type.
The chosen program type display blinks during
searching and lights when a station is found.
If no PTY station is found, “NO PTY” will be displayed for five seconds.
Displaying Radio Text
1—
/ENTER
2 — Rotary Encoder
3 — VIEW Button
PTY (Program Type) Tuning
1. Press and hold ENTER/OPTION for at least two
seconds while the unit is in Radio (FM receiving)
mode.
Text messages from a radio station can be displayed.
while receiving FM in the radio mode to
Press
select the Radio Text display.
The display will change every time the button is pressed.
CD/MP3/WMA
CONTENTS
䡵 CD/MP3/WMA. . . . . . . . . . . . . . . . . . . . . . . . .28
▫ Playback. . . . . . . . . . . . . . . . . . . . . . . . . . . . .28
▫ Repeat And Random (M.I.X.) Play . . . . . . . . . .30
▫ Searching For CD Text . . . . . . . . . . . . . . . . . . .30
▫ Folder/File Name Search (Concerning
MP3/WMA) . . . . . . . . . . . . . . . . . . . . . . . . . .31
▫ Search Position Memory . . . . . . . . . . . . . . . . .32
▫ About MP3/WMA . . . . . . . . . . . . . . . . . . . . .32
5
28 CD/MP3/WMA
CD/MP3/WMA
WARNING!
Always drive safely with your hands on the steering
wheel and obey all applicable laws. You have full
responsibility and assume all risks related to the use
of the features and applications in this vehicle. Only
use the features and applications in this vehicle
when it is safe to do so. Failure to do so may result in
an accident involving in serious injury or death.
1—
/SOURCE
/ENTER
2—
3 — Rotary Encoder
Fast Forward
4—
5 — EJECT Button
6—
Shuffle
7—
Repeat
8 — Preset Buttons
9—
Forward/
Backwards
10 —
Fast Rewind
11 —
Play/Pause
12 — BACK
Playback
1. Press
(OPEN).
The front panel will open.
2. Insert a disc with the label side facing up.
The disc will be pulled into the unit automatically.
CD/MP3/WMA 29
6. To pause playback, press
Pressing
.
again will resume playback.
7. After pressing
(OPEN) to open the front panel,
press
to eject the disc.
NOTE:
• Do not remove a CD during its eject cycle. Do not load
more than one disc at a time. A malfunction may result
from doing either.
• Three-inch (8 cm) CDs cannot be used.
3. Close the front panel manually.
NOTE:
• When a disc is already inserted, press
to switch to the Disc mode.
/SOURCE
4. While playing back MP3/WMA, press Rewind
Forward to select the desired folder.
Pressing and holding Rewind
change folders continuously.
5. Press
or
or
or
• Any file protected by DRM (Digital Rights Management) copy protection, cannot be played back on this
unit.
• The track display for MP3/WMA data playback is the
file numbers recorded on the disc.
• The playback time may not be correctly displayed
when a VBR (Variable Bit Rate) recorded file is played
Forward will
back.
to select the desired track (file).
Pressing and holding
or
will fast backward/
fast forward track continuously.
VIEW to switch the display. For details,
• Press
refer to “Displaying The Text” on page 59.
5
30 CD/MP3/WMA
Searching For CD Text
Repeat And Random (M.I.X.) Play
1. During playback, press
appears.
REPEAT ONE:
REPEAT FOLDER*:
or
until the setting On discs utilizing CD Text, songs can be searched and
played by using their recorded titles. For discs without
CD Text, searches are made using the track numbers
associated with each song.
Files in a folder are played back repeatedly.
MIX FOLDER*:
Files in a folder are played back randomly.
MIX ALL:
1. Press
/ENTER during play.
This will set the search mode.
2. Turn the Rotary encoder to select the desired track,
/ENTER.
and then press
This will play the selected track.
All files in the disc or Flash Memory are played back NOTE:
randomly.
in the search mode to cancel. Or, the search
• Press
* When MP3/WMA files are played back.
mode is canceled if no operation is performed for
60 seconds.
2. To cancel repeat or M.I.X play, select (OFF) with the
above procedure.
• When CD Text Search is made during M.I.X. play, the
NOTE:
•
indicator lights up during repeat play mode.
•
indicator lights up during random play mode.
M.I.X. play mode will be canceled.
• If any one of the preset buttons (1 through 6) is pressed
in the search mode, a search can be made quickly by
skipping to the specified location. For details, refer to
“Direct Search Function” on page 105.
CD/MP3/WMA 31
• When Folder Name Search is made during M.I.X. play,
the M.I.X. play mode will be canceled.
Folder and file names may be searched and displayed
during playback.
• The root folder of a disc is displayed as “\ROOT”.
Folder/File Name Search (Concerning MP3/WMA)
Folder Name Search Mode
1. During MP3/WMA playback, press
activate the search mode.
/ENTER to
• If any one of the preset buttons (1 through 6) is pressed
in the search mode, a search can be made quickly by
skipping to the specified location. For details, refer to
“Direct Search Function” on page 105.
2. Turn the Rotary encoder to select Folder Name Search
File Name Search Mode
mode, and then press
/ENTER.
1. During MP3/WMA playback, press
/ENTER to
3. Turn the Rotary encoder to select the desired folder.
activate the search mode.
/ENTER for at least two seconds
4. Press and hold
2. Turn the Rotary encoder to select File Name Search
to play back the first file in the selected folder.
/ENTER.
mode, and then press
NOTE:
3. Select the desired file by turning the Rotary encoder.
• If no operation is performed for 60 seconds, the search
/ENTER to play back the selected file.
4. Press
mode is canceled.
NOTE:
in the search mode to return to the previous
• Press
mode.
• If no operation is performed for 60 seconds, the search
mode is canceled.
• To search for files in the Folder Name Search mode,
press
/ENTER. Files in the folder may be • Press
searched.
mode.
in the search mode to return to the previous
5
32 CD/MP3/WMA
• When File Name Search is made during M.I.X. play, What is MP3?
the M.I.X. play mode will be canceled.
MP3, whose official name is “MPEG Audio Layer 3,” is
a compression standard prescribed by the ISO, the
• If any one of the preset buttons (1 through 6) is pressed
International Standardization Organization and MPEG
in the search mode, a search can be made quickly by
which is a joint activity institution of the IEC. MP3 files
skipping to the specified location. For details, refer to
contain compressed audio data. MP3 encoding is ca“Direct Search Function” on page 105.
pable of compressing audio data at extremely high
Search Position Memory
ratios, reducing the size of music files to as much as
one-tenth their original size. This is achieved while still
During playback, you can quickly return to the lastmaintaining near CD quality. The MP3 format realizes
selected hierarchy level in the search mode.
such high compression ratios by eliminating the
.
Press
sounds that are either inaudible to the human ear or
The hierarchy you selected last in the search mode is
masked by other sounds.
displayed.
What is WMA?
About MP3/WMA
WMA, or “Windows Media Audio,” is compressed
audio data. WMA is similar to MP3 audio data.
CAUTION!
Except for private use, duplicating audio data
(including MP3/ WMA/AAC data) or distributing,
transferring, or copying it, whether for free or for
a fee, without permission of the copyright holder
is strictly prohibited by the Copyright Act and by
international treaty.
Method for creating MP3/WMA files
Audio data is compressed using software with MP3/
WMA codecs. For details on creating MP3/WMA/
AAC files, refer to the user’s manual for that software.
MP3/WMA/AAC files that are playable on this device
have the file extensions “mp3”/“wma”/“m4a”. Files with
no extension cannot be played back (WMA ver. 7, 8 and 9
are supported). Protected files are not supported. Confirm
CD/MP3/WMA 33
that the software being used conforms to the acceptable
formats listed above. It’s possible that the format may be
unplayable even though the extension is valid.
Supported playback sampling rates and bit rates
MP3
Sampling rates:
Bit rates:
Sampling rates:
Bit rates:
48 kHz, 44.1 kHz,
32 kHz, 24 kHz,
22.05 kHz, 16 kHz,
12 kHz, 11.025 kHz,
8 kHz
8 - 320 kbps
WMA
48 kHz, 44.1 kHz, 32 kHz
32 - 192 kbps
and album name ID3 tag/WMA/AAC tag data. This
device can only display single-byte alphanumeric
characters (up to 32 for ID3 tags and up to 32 for WMA
tags) and the underscore. For non-supported characters, “No Support” is displayed or the character is
displayed as space.
If information contains characters other than ID3 tag
information, the audio file may not be played back.
The tag information may not be correctly displayed,
depending on the contents.
Producing MP3/WMA Discs
MP3/WMA files are prepared, then written to a CD-R,
CD-RW using CD-R writing software or stored to a
Flash Memory. A disc can hold up to 509 files/folders
(including Root Folders), and the maximum number of
folders is 255.
Playback may not be performed if a disc exceeds the
limitations described above.
This device may not play back correctly depending on
sampling rates. In the USB mode, the playback time
may not be correctly displayed when a VBR (Variable Media supported
Bit Rate) recorded file is played back.
The media that this device can play back are CDROMs, CD-Rs, and CD-RWs.
ID3 tags/WMA tags
This device also can play back Flash Memory media.
This device supports ID3 tag v1 and v2, and WMA/
AAC tag. If tag data is in an MP3/WMA file, this
device can display the title (track title), artist name,
5
34 CD/MP3/WMA
Corresponding File Systems
Formats supported
This device supports discs formatted with
This device supports CD-ROM XA, Mixed Mode CD,
Enhanced CD (CD-Extra) and Multi-Session.
ISO9660 Level 1 or Level 2. Under the ISO9660 standard, there are some restrictions to remember. The
This device cannot correctly play back discs recorded
with Track At Once or packet writing.
maximum nested folder depth is 8 (including the root
directory). The number of characters for a folder/file Order of files
name is limited.
Files are played back in the order that the writing
Valid characters for folder/file names are letters A-Z
software writes them to the disc. Therefore, the play(all caps), numbers 0-9, and ‘_’ (underscore).
back order may not be what is expected. Verify the
This device also can play back discs in Joliet, Romeo,
writing order in the software’s documentation. The
etc., and other standards that conform to ISO9660.
playback order of the folders and files is as follows.
However, sometimes the file names, folder names, etc.,
are not displayed correctly.
This device also supports FAT 12/16/32 for Flash
Memory device.
CD/MP3/WMA 35
5
* The folder No./ folder Name will not be displayed if no file is contained in the folder.
36 CD/MP3/WMA
Terminology
Encoding
Bit rate
Converting music CDs, WAVE (AIFF) files, and other
sound files into the specified audio compression format.
This is the “sound” compression rate specified for encoding. The higher the bit rate, the higher the sound quality, Tag
but also the larger the files.
Song information such as track titles, artist names, album
Sampling rate
names, etc., written into MP3/WMA files.
This value shows how many times per second the data is
sampled (recorded). For example, music CDs use a
sampling rate of 44.1 kHz, so the sound is sampled
(recorded) 44,100 times per second. The higher the sampling rate, the higher the sound quality, but also the
larger the volume of data.
Root folder
The root folder (or root directory) is found at the top of
the file system. The root folder contains all folders and
files. It is created automatically for all burned discs.
SOUND SETTING
CONTENTS
䡵 SOUND SETTING . . . . . . . . . . . . . . . . . . . . . . .38
▫ About “Text” . . . . . . . . . . . . . . . . . . . . . . . . .60
▫ Adjusting Subwoofer Level/Bass Level/Treble
Level/Balance (Between Left And Right)/Fader
(Between Front And Rear)/Defeat. . . . . . . . . . .38
▫ Using The Front AUX Input Terminal . . . . . . . .60
▫ Audio Setup . . . . . . . . . . . . . . . . . . . . . . . . . .39
▫ BASS ENGINE SQ Function . . . . . . . . . . . . . . .47
▫ About Time Correction . . . . . . . . . . . . . . . . . .48
▫ About The Crossover . . . . . . . . . . . . . . . . . . . .53
䡵 OTHER FUNCTIONS . . . . . . . . . . . . . . . . . . . . .59
▫ Displaying The Text. . . . . . . . . . . . . . . . . . . . .59
▫ Option Menu Setting . . . . . . . . . . . . . . . . . . . .61
▫ Applying TuneIt . . . . . . . . . . . . . . . . . . . . . . .64
▫ Adjusting The Sound Via Smartphone . . . . . . . .64
▫ Facebook Notification Function. . . . . . . . . . . . .65
▫ Receiving Notification (Ready On Future
Update) . . . . . . . . . . . . . . . . . . . . . . . . . . . . .65
▫ Displaying Notification List . . . . . . . . . . . . . . .66
6
38 SOUND SETTING
SUBWOOFER*1/*2 → BASS LEVEL*2/*3 → TRE
LEVEL*2/*3 → BALANCE → FADER*4 → DEFEAT →
VOLUME→ SUBWOOFER
SOUND SETTING
*1 When the subwoofer mode is set to OFF, its level
cannot be adjusted, refer to “Turning Subwoofer ON/
OFF”.
*2 Not displayed when BASS ENGINE SQ mode is
selected. Refer to “Switching BASS ENGINE SQ
mode”.
*3 Adjustable only when DEFEAT is OFF.
*4 Not displayed when 2WAY/3WAY system mode is
set to 3WAY.
1 — AUDIO/SETUP
2 — Bass
3 — Rotary Encoder
4—
/Enter
5 — Phone Button
6 — BACK Button
Adjusting Subwoofer Level/Bass Level/Treble
Level/Balance (Between Left And Right)/Fader
(Between Front And Rear)/Defeat
1. Press AUDIO/Setup repeatedly to choose the desired
mode. Each press changes the mode as follows:
Refer to “Switching the 2WAY/3WAY system mode”.
Subwoofer Level
Bass Level
Treble Level
Balance
Fader
Defeat
Volume
0 ~ 15
−7 ~ 7
−7 ~ 7
−15 (L) ~ 15 (R)
−15 (R) ~ 15 (F)
ON/OFF
0 ~ 35
SOUND SETTING 39
2. Turn the Rotary Encoder to select Audio, and then
NOTE:
press
/ENTER.
• If no operation is performed for five seconds after
selecting the SubW LEVEL, BASS, TREBLE, BAL- 3. Turn the Rotary Encoder to select the desired sound
ANCE, FADER, DEFEAT or VOLUME mode, the
/ENTER.
setting menu, and then press
unit automatically returns to normal mode.
EQ PRESETS*1/*2/*3 ↔ BASS ENGIN*4/*5 ↔
2. Turn the Rotary encoder until the desired sound is
PARAMETER*5/*6 ↔ 9BAND P-EQ*1/*3/*7 ↔
obtained in each mode.
SOURCE VOL ↔ X-OVER*1/*3 ↔ SUBWOOFER*8 ↔
SUBW PHASE*9 ↔ SUBW SYS*3/*9 ↔ LENGTH*1 s
NOTE:
TCR*1 ↔ POWER IC ↔ MX SETTING*1/*3 ↔ EQ
• By setting DEFEAT ON, previously adjusted level
PRESETS
settings of BASS and TREBLE will return to the
*1 Adjustment cannot be performed when DEFEAT is
factory defaults.
set to ON.
Audio Setup
*2 Any changes made to either EQ PRESETS or
You can flexibly customize the unit to suit your own
9BAND P-EQ are reflected in the others’ settings.
preference and usage. From the AUDIO SETUP menu,
*3 These items are not adjustable in BASS ENGINE SQ
Audio Setting can be modified.
mode. If you want to adjust these items separately,
follow the confirm message and select “YES” to exit
Use steps 1 to 5 to select the category you wish to
BASS ENGINE SQ mode, then make the setting.
modify. For details on how to change each setting, see
*4 Not displayed when the Audio Setup mode is
the following sections below.
activated by pressing BASS.
1. Press and hold AUDIO/SETUP for at least two sec*5 Not displayed when 2WAY /3WAY system mode is
onds to activate the SETUP mode.
set to 3WAY.
6
40 SOUND SETTING
• You can access the Sound menu mode directly by
pressing BASS when BASS ENGINE is set to OFF.
*7 In step 3, after selecting a Band (BAND1 to BAND9)
Refer to “Setting BASS ENGINE SQ ON/ OFF”.
from 9BAND P-EQ adjustment mode. Turn the Rotary
encoder to select the desired item, and then press • If no operation is performed for 60 seconds, sound
ENTER to continue to step 4.
menu mode is canceled.
*6 Not displayed when BASS ENGINE is set to OFF.
*8 This item is also related to BASS ENGINE SQ mode Equalizer Presets (Factory’s EQ)
when you adjust sound settings via the TuneIt App on
Ten typical equalizer settings are preset at the factory for
a Smartphone. Refer to “Adjusting the sound via the
a variety of musical source material. User settings are
Smartphone”.
created in the Parametric EQ mode.
*9 These functions are inoperable when SUBWOOFER
User ↔ Flat (Initial setting) ↔ Pops ↔ Rock ↔ News ↔
is set to OFF.
Jazz&Blues ↔ Electrical Dance ↔ Hip Hop&Rap ↔ Easy
4. Turn the Rotary Encoder to change the setting, and Listening ↔ Country ↔ Classical
/ENTER.
then press
NOTE:
5. Press and hold AUDIO/SETUP for at least two sec• The 9 - Band, Parametric EQ is used to create the
onds to return to normal mode.
Factory EQ settings.
NOTE:
Setting BASS ENGINE SQ On/Off
returns to the previous Sound menu
• Pressing
This function provides a short cut for BASS ENGINE SQ
mode.
setting. EQ PRESETS, 9BAND P-EQ, etc., will no longer
• Adjustment cannot be performed during a call.
be adjustable when ON is set.
• Pressing BACK returns to the previous Sound menu Setting item: BASS ENGINE
mode.
SOUND SETTING 41
Setting contents:
OFF (Initial setting) / ON
OFF (MANUAL SET mode):
Adjust each audio effect setting separately.
ON (BASS ENGINE SQ mode):
Adjust BASS ENGINE SQ via a short cut.
NOTE: You can also set BASS ENGINE SQ ON/OFF
directly by pressing and holding BASS. Refer to “Switching BASS ENGINE SQ mode”.
Adjusting The Parametric Equalizer Curve
(Parametric EQ)
You can modify the Equalizer settings to create a response curve more appealing to your personal taste.
1. After selecting a BAND (BAND1 ~ BAND9) from the
9BAND P-EQ adjustment mode, turn the Rotary encoder to select the desired setting item, and then press
/ENTER.
CENTER FRQ ↔ WIDTH (Q) ↔ LEVEL ↔ CENTER
FRQ
2. Turn the Rotary Encoder to select the desired freDisplaying the BASS ENGINE SQ PARAMETER
quency within the selected band, then press
/Enter.
After setting BASS ENGINE to ON, you can display the
current BASS ENGINE SQ Parameter type.
3. Press BACK to return to the previous step.
Setting item: PARAMETER
Adjusting The Band
Displaying contents:
Setting contents:
The name of the parameter currently selected is dis- Band1/Band2/Band3/Band4/Band5/Band6/Band7/
played. (INITIAL / TUNEIT A ~ TUNEIT E)
Band8/Band9
6
42 SOUND SETTING
Adjusting The Frequency (Freq.)
NOTE:
Adjustable
Band 1
Band 2
Band 3
Band 4
Band 5
Band 6
Band 7
Band 8
Band 9
• Band 2 and Band 8 are the same as the Bass and Treble
controls. Their Level adjustment can also be controlled
by pressing AUDIO and selecting Bass Level or Treble
Level. Refer to “Adjusting Subwoofer Level/Bass
Level/Treble Level/Balance (Between Left and
Right)/Fader (Between Front and Rear)/Defeat” on
page 38.
frequency bands: 20 Hz to 20 kHz
20 Hz ~ 100 Hz (63 Hz)
63 Hz ~ 315 Hz (125 Hz)
125 Hz ~ 500Hz (250 Hz)
250 Hz ~ 1 kHz (500 Hz)
500 Hz ~ 2 kHz (1 kHz)
1 kHz ~ 4 kHz (2 kHz)
7: 2 kHz ~ 7.2 kHz (4 kHz)
5.8 kHz ~ 12 kHz (8 kHz)
9 kHz ~ 20 kHz (16 kHz)
Setting The Bandwidth (Q)
Setting contents:
3.0 (Initial setting) / 4.0 / 5.0
Adjusting The Level
Setting contents:
-7 to +7 (Initial setting: 0)
• Settings exceeding the frequency of adjacent bands are
not available.
• While adjusting the Parametric EQ, you should consider the frequency response of the connected
speakers.
• The 9-Band, Parametric EQ is used to customize the
EQ PRESETS settings.
Setting The Source Volume Level
The output level of each source is individually adjustable.
For example, if the Tuner level sounds lower than Disc,
its output can be adjusted without affecting the other
sources.
• Setting item: SOURCE VOL
SOUND SETTING 43
• Further setting items: Tuner / SiriusXM / Disc / USB 3. Repeat step 2 to adjust the Slope and Level within the
/ iPod / BTAudio / Pandora / AUX
selected channel.
Setting contents:
−14 dB ~ +14 dB
Adjusting The Crossover Settings (X-Over)
Before performing the following procedures, refer to
“About the Crossover” on page 53.
Setting item: X-OVER
1. After selecting X-Over from the Audio Setup mode,
turn the Rotary Encoder to select the desired channel,
/ENTER.
then press
2WAY System
FRONT (HPF) ↔ REAR (HPF) ↔ SUBW LPF ↔
FRONT (HPF)
3WAY System
Selecting The Cut-Off Frequency (Freq.)
2WAY System
20 / 25 / 31.5 / 40 / 50 / 63 / 80 (Initial setting) / 100
/ 125 / 160 / 200 (Hz)
3WAY System
LOW/MID LOW:
20 / 25 / 31.5 / 40 / 50 / 63 / 80 / 100 / 125 / 160 /
200 / 250 / 315 / 400 / 500 (Initial setting) / 630 /
800 (Hz)
MID HIGH:
20 / 25 / 31.5 / 40 / 50 / 63 / 80 / 100 / 125 / 160 /
200 / 250 / 315 / 400 / 500 / 630 / 800 / 1 k / 1.2 k /
1.6 k / 2 k / 2.5 k / 3.2 k / 4 k / 5 k (Initial setting) /
6.3 k / 8 k / 10 k / 12.5 k / 16 k / 20 k (Hz)
HIGH:
1 k / 1.2 k / 1.6 k / 2 k /2.5 k / 3.2 k / 4 k / 5 k (Initial
setting) / 6.3 k / 8 k / 10 k / 12.5 k / 16 k / 20 k (Hz)
LOW (LPF) ↔ MID LOW (HPF) ↔ MID HIGH (LPF)
↔ HIGH (HPF) ↔ LOW
NOTE: The frequency of MID LOW should not be more
2. Turn the Rotary Encoder to select the desired fre- than the frequency of MID HIGH.
quency within the selected channel, then press
/ENTER.
6
44 SOUND SETTING
Adjusting The Slope
2WAY System
FLAT / 6 / 12 / 18 / 24 (dB/oct.)
3WAY System
FLAT / 6 / 12 (dB/oct.)
NOTE: The Initial setting for 2WAY is FLAT. 3WAY is 12.
Adjusting the Level (LEVEL)
Setting contents:
OFF/ON (Initial setting)
OFF: No subwoofer signal is output from the Subwoofer RCA Connector.
ON: The subwoofer signal is output from the Subwoofer RCA Connector.
Setting The Subwoofer Phase
2WAY System/3WAY System
−12 to 0 (dB) (Initial setting: 0)
The subwoofer output phase is toggled Subwoofer Normal (0°) or Subwoofer Reverse (180°). To adjust the level,
NOTE: The level setting results for MID LOW and MID turn the Rotary Encoder.
HIGH in 3WAY system are linkage.
• Setting item: Subwoofer Phase
Repeat steps 1 to 2 to make adjustment to the other
channels.
Turning Subwoofer ON/OFF
Setting contents:
NORMAL (Initial setting) / REVERSE
Setting The Subwoofer System
When the subwoofer is on, you can adjust the subwoofer
output level (refer to “Adjusting Subwoofer Level/Bass When the subwoofer is on, you can select either System
Level/Treble Level/Balance (Between Left and Right)/ 1 or System 2 for the desired subwoofer effect.
Fader (Between Front and Rear)/Defeat” on page 38.
• Setting item: Subwoofer System
• Setting item: Subwoofer
Setting contents:
System 1/ System 2 (Initial setting)
SOUND SETTING 45
System 1:
Subwoofer level changes according to the main volume setting.
System 2:
Subwoofer level change is different from the main
volume setting. For example, even at low volume
settings, the subwoofer is still audible.
Setting The Time Correction Unit (TCR Parameter)
F-L*1 ↔ F-R*2 ↔ R-L*3 ↔ R-R*4 ↔ SSW-L ↔ SW-R
*1 Front-L
*2 Front-R
*3 Rear-L
*4 Rear-R
2. Turn the Rotary Encoder to adjust the distance of the
/ENTER.
selected speaker, and then press
You can change the unit, (cm or inch) of time correction.
0.0 cm to 336.6 cm (3.4 cm/step)
• Setting item: TCR Parameter
0.0 inch to 132.7 inch (1.3 inch/step)
Setting contents:
cm (Initial setting) / inch
cm: Time correction value is in centimeters.
inch: Time correction value is in inches.
Adjusting The Time Correction (T.Correction)
Before performing the following procedures, refer to
“About Time Correction” on page 48.
1. After selecting T.Correction from the Audio Setup
mode, turn the Rotary Encoder to select a speaker to
/ENTER.
be adjusted, and then press
NOTE:
• The total adjustment distance for all speakers should
be less than 510 centimeters (201 inches).
3. Repeat steps 1 and 2 to set another speaker.
By setting these values to make its sound reach the
listening position at the same time as the sound of
other speakers.
6
46 SOUND SETTING
External Device
Connecting to an External Amplifier (POWER IC)
When an external amplifier is connected, sound quality
can be improved by stopping the power supply of the
built-in amplifier.
Setting item: POWER IC
Setting contents:
OFF / ON (Initial setting)
OFF :
NOTE:
Use this mode when the line output of this unit is used to
drive an external amplifier. In this setting, the head unit’s • For more details about 2WAY/3WAY system mode.
internal amplifier is turned OFF and cannot drive speakPlease refer to “Switching the 2WAY/3WAY system
ers.
mode” and “About the 2WAY/ 3WAY system mode”.
ON :
The speakers are driven by the built-in amplifier.
• No sound is produced by the system when the power
output is set to OFF.
Setting The Media Xpander Mode (MX Setup)
MX (Media Xpander) makes vocals or instruments sound
distinct regardless of the music source. The CD and iPod,
etc. will be able to reproduce the music clearly even in
cars with a lot of road noise.
SOUND SETTING 47
• Setting item: MX Setup
BASS ENGINE SQ:
1. Turn the Rotary Encoder to select the source to which Adjust the relevant Bass parameters uniformly and auyou want to apply Media Xpander, and then press tomatically.
/ENTER.
MANUAL SET:
FM ↔ SIRIUS XM ↔ CD ↔ CMPM* ↔ USB ↔ IPOD
Adjust each audio effect setting separately and manually.
↔ BT AUDIO ↔ PANDORA ↔ AUX ↔ FM
NOTE:
* Be applied for MP3/WMA files in disc.
2. Turn the Rotary Encoder to select the Media Xpander • This operation can also be performed by selecting
BASS ENGIN in Audio Setup mode. Refer to “Setting
/ENTER.
level, and then press
BASS ENGINE SQ ON/OFF”.
OFF ↔ Level 1 ↔ Level 2 ↔ Level 3
• You can access the Sound menu mode directly by
BASS ENGINE SQ Function
pressing BASS when BASS ENGIN is set to OFF.
With the BASS ENGINE SQ function on this unit, several
• You can set this item via the TuneIt App on a Smartparameters affecting Bass performance are adjusted siphone. Refer to “Adjusting the sound via the
multaneously. The Bass Level adjustment varies these
Smartphone”.
parameters uniformly for optimum Bass effect at differ• If you switch the 2WAY/3WAY system (page 23) to
ent levels.
3WAY mode, you cannot adjust this item.
Switching BASS ENGINE SQ mode
Press and hold BASS for at least two seconds to switch
the sound mode.
BASS ENGINE SQ ↔ MANUAL SET (Initial setting)
6
48 SOUND SETTING
Adjusting BASS ENGINE SQ Level
• From Level 0 to Level 6, the effect of BASS ENGINE SQ
Enhance increases level by level.
With BASS ENGINE SQ ON, adjusting the Bass Level
uniformly effects various sound parameters for optimum About Setup when the external power amplifier is
Bass effect.
connected.
1. Press BASS to display the BASS ENGINE SQ Level In order to optimize the BASS ENGINE SQ, we recomadjustment screen.
mend the following power amplifier setup.
The unit’s back lighting changes to white amber After setting up, you can adjust the BASS ENGINE SQ
during this period.
Level according to the music.
2. Turn the Rotary encoder to select the desired level (+0 1. Set gain of the power amplifier to “MIN”.
- +6).
2. Set the Crossover Mode Sector switch to “OFF”.
The initial level is +3.
3. Set the BASS ENGINE SQ of this unit to “ON”, and the
NOTE:
BASS ENGINE SQ Level to “+3”.
• Adjustable only when DEFEAT is OFF.
4. Play a song of the genre you frequently listen to, and
adjust gain of the power amplifier.
• Adjustable when 2WAY/3WAY system mode is set to
2WAY.
About Time Correction
• The Bass parameters affected contain EQ PRESETS,
9 BAND EQ, SUBWOOFER (when set this item via
TuneIt App), X-OVER, SUBW SYS and MX SETTING.
These items are set automatically in BASS ENGINE SQ
mode and cannot be adjusted separately.
The distance between the listener and the speakers in a
car vary widely due to the complex speaker placement.
This difference in the distances from the speakers to the
listener creates a shift in the sounds image and frequency
characteristics. This is caused by the time delay between
the sound reaching the listener’s right versus the left ear.
SOUND SETTING 49
To correct this, this unit is able to delay the audio signal
to the speakers closest to the listener. This effectively
creates a perception of increased distance for those speakers. The listener can be placed at an equal distance
between the left and right speakers for optimum staging.
Listening Position example as follows in this section:
Example 1: Front Left Seat
Adjust the time correction level of the front left speaker to
a high value and the rear right to zero or a low value.
6
1 — 5.1ms
The sound is not balanced because the distance between
the listening position and the various speakers is different. The difference in distance between the front left
speaker and the rear right speaker is 1.75 m (68-7/8⬙).
Here we calculate the time correction value for the front
left speaker in the diagram on the above.
Conditions:
1 — 0.5m
2 — 2.25m
Farthest Speaker - listening position : 2.25 m (88-9/16⬙)
Front left speaker - listening position : 0.5 m
(19-11/16⬙)
50 SOUND SETTING
Calculation: L = 2.25 m - 0.5 m = 1.75 m (68-7/8⬙)
Time correction = 1.75 ÷ 343* × 1000 = 5.1 (ms)
* Speed of sound: 343 m/s (765 mph) at 20°C
These values are the time correction values for the
different speakers. Setting these values to make each
sound reach the listening position at the same time as the
sound of other speakers.
In other words, giving the front left speaker a time Time Correction Value List
correction value of 5.1 ms makes it seem as if its distance
from the listener is the same as the distance to the farthest
Delay
Time Difspeaker. Time correction eliminates the differences in the
Number
ference
time required for the sound to reach the listening posi(ms)
tion. The time of the front left speaker is corrected by
0
0.0
5.1 ms so that its sound reaches the listening position at
1
0.1
the same time as the sound of other speakers.
2
0.2
Example 2: All Seats
3
0.3
Adjust the time correction level of each speaker to almost
4
0.4
the same level.
5
0.5
1. Sit in the listening position (driver’s seat, etc.) and
6
0.6
measure the distance (in meters) between your head
7
0.7
and the various speakers.
8
0.8
2. Calculate the difference between the distance correc9
0.9
tion value to the farthest speaker and the other speak10
1.0
ers.
11
1.1
L = (distance to farthest speaker) - (distance to other
12
1.2
speakers)
Distance
(cm)
Distance
(inch)
0.0
3.4
6.8
10.2
13.6
17.0
20.4
23.8
27.2
30.6
34.0
37.4
40.8
0.0
1.3
2.7
4.0
5.4
6.7
8.0
9.4
10.7
12.1
13.4
14.7
16.1
SOUND SETTING 51
Delay
Number
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
Time Difference
(ms)
1.3
1.4
1.5
1.6
1.7
1.8
1.9
2.0
2.1
2.2
2.3
2.4
2.5
2.6
2.7
2.8
2.9
3.0
Distance
(cm)
Distance
(inch)
Delay
Number
44.2
47.6
51.0
54.4
57.8
61.2
64.6
68.0
71.4
74.8
78.2
81.6
85.0
88.4
91.8
95.2
98.6
102.0
17.4
18.8
20.1
21.4
22.8
24.1
25.5
26.8
28.1
29.5
30.8
32.2
33.5
34.8
36.2
37.5
38.9
40.2
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
Time Difference
(ms)
3.1
3.2
3.3
3.4
3.5
3.6
3.7
3.8
3.9
4.0
4.1
4.2
4.3
4.4
4.5
4.6
4.7
4.8
Distance
(cm)
Distance
(inch)
105.4
108.8
112.2
115.6
119.0
122.4
125.8
129.2
132.6
136.0
139.4
142.8
146.2
149.6
153.0
156.4
159.8
163.2
41.5
42.9
44.2
45.6
46.9
48.2
49.6
50.9
52.3
53.6
54.9
56.3
57.6
59.0
60.3
61.6
63.0
64.3
6
52 SOUND SETTING
Delay
Number
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
Time Difference
(ms)
4.9
5.0
5.1
5.2
5.3
5.4
5.5
5.6
5.7
5.8
5.9
6.0
6.1
6.2
6.3
6.4
6.5
6.6
Distance
(cm)
Distance
(inch)
Delay
Number
166.6
170.0
173.4
176.8
180.2
183.6
187.0
190.4
193.8
197.2
200.6
204.0
207.4
210.8
214.2
217.6
221.0
224.4
65.7
67.0
68.3
69.7
71.0
72.4
73.7
75.0
76.4
77.7
79.1
80.4
81.7
83.1
84.4
85.8
87.1
88.4
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
Time Difference
(ms)
6.7
6.8
6.9
7.0
7.1
7.2
7.3
7.4
7.5
7.6
7.7
7.8
7.9
8.0
8.1
8.2
8.3
8.4
Distance
(cm)
Distance
(inch)
227.8
231.2
234.6
238.0
241.4
244.8
248.2
251.6
255.0
258.4
261.8
265.2
268.6
272.0
275.4
278.8
282.2
285.6
89.8
91.1
92.5
93.8
95.1
96.5
97.8
99.2
100.5
101.8
103.2
104.5
105.9
107.2
108.5
109.9
111.2
112.6
SOUND SETTING 53
Delay
Number
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
Time Difference
(ms)
8.5
8.6
8.7
8.8
8.9
9.0
9.1
9.2
9.3
9.4
9.5
9.6
9.7
9.8
9.9
Distance
(cm)
Distance
(inch)
289.0
292.4
295.8
299.2
302.6
306.0
309.4
312.8
316.2
319.6
323.0
326.4
329.8
333.2
336.6
113.9
115.2
116.6
117.9
119.3
120.6
121.9
123.3
124.6
126.0
127.3
128.6
130.0
131.3
132.7
About The Crossover
Crossover (X-Over):
This unit is equipped with an active crossover. The
crossover limits the frequencies delivered to the outputs.
Each channel is controlled independently. Thus, each
speaker pair can be driven by the frequencies for which
they have been optimally designed.
The crossover adjusts the HPF (high pass filter) or LPF
(low pass filter) of each band, and also the slope (how fast
the filter rolls off the highs or lows).
Adjustments should be made according to the reproduction characteristics of the speakers. Depending on the
speakers, a passive network may not be necessary. If you
are unsure about this point, consult your authorized
Alpine dealer.
6
54 SOUND SETTING
2WAY Mode
Low range
speaker
Rear high range
speaker
Front high
range speaker
Cut-off frequency (1/3 octave steps)
HPF
LPF
—
20 Hz - 200 Hz
20 Hz - 200 Hz
—
20 Hz - 200 Hz
—
Slope
HPF
—
Flat, 6, 12, 18,
24 dB/oct.
Flat, 6, 12, 18,
24 dB/oct.
Level
LPF
Flat, 6, 12, 18,
24 dB/oct.
—
0 to −12 dB
—
0 to −12 dB
0 to −12 dB
SOUND SETTING 55
6
1 — Low Range
2 — High Range
3WAY Mode
Low range
speaker
Rear high range
speaker
Cut-off frequency (1/3 octave
steps)
HPF
LPF
—
20 Hz - 800 Hz
20 Hz - 800 Hz
20 Hz - 20 kHz
Slope
HPF
—
Flat, 6, 12 dB/
oct.
LPF
Flat, 6, 12 dB/
oct.
Flat, 6, 12 dB/
oct.
Level
0 to −12 dB
0 to −12 dB
56 SOUND SETTING
Front high
range speaker
1 Hz - 20 Hz
—
Flat, 6, 12 dB/
oct.
—
0 to −12 dB
* Depending on the response characteristics of the
speaker, care should be taken when setting the response
slope of the high range speaker to FLAT in 3WAY mode,
as speaker damage may result.
1 — Level Adjusting (0 to
−12 dB)
2 — Output Frequency Range
3 — Slope Flat
4
5
6
7
—
—
—
—
Slope Adjusting
LPF Cut-Off Frequency
HPF Cut-Off Frequency
20 Hz
NOTE:
• HPF (high pass filter): Cuts the lower frequencies and
allows the higher frequencies to pass.
• LPF (low pass filter): Cuts the higher frequencies and
allows the lower frequencies to pass.
SOUND SETTING 57
• Slope: The level change (in dB) for a frequency change Switching The 2WAY/3WAY System Mode
of one octave.
1. Press the AUDIO/SETUP and the PHONE button at
the same time.
• The higher the slope value, the steeper the slope
becomes.
NOTE: In this case, the device will be muted.
• Adjust the slope to Flat to bypass the HP or LP filters.
2. Turn the Rotary encoder to select the desired system
mode, and then press ENTER.
• Do not use a tweeter without the HPF on or set to a
low frequency, as it may cause damage to the speaker
NOTE: When the system mode is changed, the setting
due to the low frequency content.
items for X-OVER are displayed. Please follow the in• You cannot adjust the crossover frequency higher than structions of “Adjusting the Crossover Settings
(X-OVER)”.
the HPF or lower than the LPF.
• Adjustment should be made according to the recom- 3. After setting, turn the Rotary encoder to select DONE,
and then press ENTER. “TURN ACC OFF AND ON”
mended crossover frequency of the connected speakwill be displayed.
ers. Determine the recommended crossover frequency
of the speakers. Adjusting to a frequency range outside
4. Switch the ignition key to ACC OFF.
that recommended may cause damage to the speakers.
Depending on the response characteristics of the
For the recommended crossover frequencies of Alpine
speaker, care should be taken when you switch the
speakers, refer to the respective Owner’s Manual. We
2WAY/3WAY system, as speaker damage may result.
are not responsible for damage or malfunction of
speakers caused by using the crossover outside the 5. Switching the ignition key from ACC OFF to ON. The
recommended value.
change is saved.
6
58 SOUND SETTING
NOTE:
• If you skip the 4th and the 5th steps, the setting results
will not be saved and unit will return to previous
mode.
• While playing back music after the vehicle’s ignition is
turned off (STAY ON mode), you cannot adjust the
2WAY/3WAY mode.
About The 2WAY/3WAY System Mode
The X-OVER for a 2WAY system (frequency range is
divided between highs for front/rear and lows for the
Subwoofer).
3WAY mode
2WAY mode
The X-OVER for a 3WAY system whose frequency range
is divided among the highs (Front), mids (Front), and
lows (Subwoofer).
SOUND SETTING 59
• Use the Sub-W output cord to connect the unit to the disc. It is also possible to display the folder name, the file
name and the tag, etc. while playing MP3/WMA/AAC
low range speaker.
files.
• You cannot adjust the fader when set to 3WAY.
Press
View.
OTHER FUNCTIONS
The display will change every time the button is pressed.
NOTE:
• When the Text Scroll is set to Manual (refer to “Scroll
Setting (Text Scroll)” on page 73), press and hold
View for at least two seconds, the current text
will be scrolled one time (except Radio mode).
The display in Radio mode:
If there is PS (Program Service Name)
1
2
3
4
—
SOURCE
— Rotary Encoder
/ENTER
—
—
VIEW
5—
Play/Pause
6 — BACK Button
7 — BAND Button
Displaying The Text
Text information, such as the disc name and the track
name, will be displayed if playing a CD text compatible
BAND/PS (Program Service Name) → ARTIST/SONG
→ PTY (Program Type)/PS (Program Service Name) →
RADIO TEXT→ BAND/CLOCK→ BAND/PS (Program
Service Name)
If there is no PS (Program Service Name)
BAND/FREQUENCY→ ARTIST/SONG → PTY (Program Type)/FREQUENCY → RADIO TEXT → BAND/
CLOCK→ BAND/FREQUENCY
6
60 SOUND SETTING
information is displayed (e.g., song name, artist name,
and album name). All other tag data is ignored. If there is
TRACK NO./ELAPSED TIME → DISC TEXT*1/TRACK
no tag information, “ARTIST”/“ALBUM”/“SONG” is
TEXT*1 → TRACK NO./CLOCK → TRACK NO./
displayed.
ELAPSED TIME
*4 Depending on the connected Smartphone, the elapsed
The display in MP3/WMA mode:
time may not be displayed.
FOLDER NO./FILE NO./ELAPSED TIME → FOLDER
NAME*2/FILE NAME*2 → ARTIST NAME*3/SONG About “Text”
NAME*3 → ALBUM NAME*3/SONG NAME*3 → Text compatible CDs contain text information such as the
FOLDER NO./FILE NO./CLOCK → FOLDER NO./FILE disc name and track name. Such text information is
NO./ELAPSED TIME
referred to as “text”.
The display in CD mode:
The display in BLUETOOTH Audio mode:
NOTE:
BT AUDIO/ELAPSED TIME*4 → ARTIST NAME*3/ • Some characters may not be displayed correctly with
SONG NAME*3 → ALBUM NAME*3/SONG NAME*3
this device, depending on the character type.
→ BT AUDIO/CLOCK → BT AUDIO/ELAPSED TIME
• If there is no TEXT information, the display is blank.
*1 Displayed during playback of a disc with CD text. If
there is no Text (Disc Name or Track Name), “DISC • The text or tag information may not be correctly
displayed, depending on the contents.
TEXT”/ “TRACK TEXT” is displayed.
*2 Displayed during playback of MP3/WMA with Using The Front AUX Input Terminal
folder/file information. If there is no folder/file informa- Connect a portable music player, etc. by simply connecttion, “FOLDER”/“FILE” is displayed.
ing it to the input on the front panel. An optional adapter
*3 ID3 tag/WMA tag If an MP3/WMA file contains cable is required (standard RCA to 3.5ø mini-phono plug
ID3 tag/WMA tag information, the ID3 tag/WMA tag or 3.5ø to 3.5ø mini-phono plug).
SOUND SETTING 61
Press SOURCE, and select the AUXILIARY mode to listen NOTE: This function is available only when AUX SETUP
to the portable device.
is set to ON. For details, refer to “Setting the AUX SETUP
mode”.
CDE-164BT
Portable player, etc.
Option Menu Setting
You can quickly adjust the setting items relevant to the
NOTE: This function is available only when AUX SETUP
current SOURCE by using Option Menu.
is set to ON. For details, refer to “Setting the AUX
SETUP”.
/ENTER/OPTION for at least
1. Press and hold
2 seconds to activate the Option menu of the
current source.
NOTE:
• The option menu varies depending on the source.
2. Turn the Rotary encoder to select the desired setting
/ENTER.
item, and then press
3. Turn the Rotary encoder to change the setting, and
/ENTER.
then press
After the setting, the display will return to the current
source automatically.
1 — Main Unit
2 — Optional Adapter Cable (RCA pin plugs [red, white] 3.5ø
miniplugs) or (3.5ø miniplugs)
• Setting item:
HD Radio mode:
PTY SELECT*1 ↔ TUNER SET*2 ↔ SOURCE VOL*3
↔ MX SETTING*4 ↔ PTY SELECT
6
62 SOUND SETTING
SiriusXM mode:
Phone mode (Non-calling mode):
TUNE SCAN*5 ↔ ALERT MEMO*6 ↔ SXM SET*7 ↔
SOURCE VOL*3 ↔ MX SETTING*4 ↔ TUNE SCAN
PHONE SET*13 ↔ SOURCE VOL*14 ↔ PHONE SET
DISC mode:
Phone mode (Calling mode):
CD SET*8 ↔ SOURCE VOL*3 ↔ MX SETTING*4 ↔
CD SET
MIC GAIN*15 ↔ CALL SOUND*15 ↔ SPK
SWITCH*16 ↔ VOICE MUTE*17 ↔ CALL WAIT*18
↔ END CALL*19 ↔ SOURCE VOL*14 ↔ MIC GAIN
USB mode:
*1 Refer to “PTY (Program Type) Tuning”.
SOURCE VOL*3 ↔ MX SETTING*4 ↔ SOURCE VOL
*2 The setting items are the same as TUNER setting in
SETUP mode. For details, refer to “Setup”.
iPod mode:
APP DIRECT*9 ↔ IPOD SET*10 ↔ SOURCE VOL*3 ↔
MX SETTING*4 ↔ APP DIRECT
AUX mode:
AUX SET*11 ↔ SOURCE VOL*3 ↔ MX SETTING*4 ↔
AUX SET
Pandora mode:
SOURCE VOL*3 ↔ MX SETTING*4 ↔ SOURCE VOL
BT Audio mode:
BT SET*12 ↔ SOURCE VOL*3 ↔ MX SETTING*4 ↔
BT SET
*3 You can individually emphasize or weaken the
volume level of the current source to create your own
tonal preference. The setting values in Option mode
and in SETUP mode are linked. Refer to “Setting The
Source Volume Level”.
*4 Refer to “Setting The Media Xpander Mode” on
page 20.
*5 Displayed only when SiriusXM Tuner-SXV200 or
later is connected. For details, refer to “TuneScan
Function”.
*6 Refer to “Storing The Desired Artist And Song
Alerts”.
SOUND SETTING 63
*7 ALERTSETUP, GAME ALERT, P-LOCK, SIGNAL
IND and TUNE START can be selected in this mode.
For details about these settings, refer to “SiriusXM
Setting”.
this setting. The setting values in Option mode and in
SETUP mode are linked. Refer to “Adjusting The
Volume (SOURCE VOL)”.
*8 PLAY MODE can be selected in this mode. For
details, refer to “Playing MP3/WMA Data (PLAY
MODE)”.
*16 While calling, the call sound can be switched
between the unit and Smartphone by using this setting.
This operation can also be done by pressing BAND.
Refer to “Call Switching Operation”.
*9 Refer to “Setting The iPod Control”.
*10 The setting items are the same as iPod setting in
SETUP mode. For details, refer to “iPod/iPhone Search
Mode Setting”.
*11 AUX NAME can be selected in this mode. For
details, refer to “Setting The AUX NAME Mode”.
*12 FW VERSION can be selected in this mode. You can
see the current firmware version about Bluetooth by
using this setting.
*15 Refer to “Setting The Bluetooth Sound Quality”.
*17 While calling, and the Voice Mute is activated, the
microphone input will mute instantly and “VOICE
MUTE” will blink. This operation can also be done by
pressing Play/Pause. Refer to “Muting The Microphone Input Quickly (Voice Mute)”.
*18 If there is a waiting call, select this item to display
to
the waiting person Name and number. Press
switch the information between the current call and
the person on hold.
*13 CALL SOUND, CALLER ID, PB UPDATE, PB
ORDER, SPEAKER SL and FW VERSION can be NOTE:
selected in this mode. For details about these settings, • Press
to return to the previous mode.
refer to “Bluetooth Setup”.
• If no operation is performed for 60 seconds, the unit
*14 The Hands free phone talk level, ring tone level
will return to normal mode automatically.
and microphone gain level can be adjusted by using
6
64 SOUND SETTING
• Some functions of TuneIt may not be available when
the Smartphone is not in service area or receives no
This unit’s sound tuning is programmable from a consignal.
nected Smartphone. It is also possible to download
specific parameters for certain vehicles from Alpine’s Adjusting The Sound Via Smartphone
TuneIt database stored in the Cloud. Using the TuneIt
After setting the above procedure, the VOLUME indicaApp, customized parameters can also be uploaded for
tor lights up, and then you can adjust the unit’s sound
others to share and rate.
function on the Smartphone.
Through this unit, it is also possible to receive and
1. Make sure the unit is powered on.
respond to information from Alpine’s Social Network
Service (SNS) available through the connected Smart- 2. Launch the TuneIt App on Smartphone. Adjust the
phone.
unit’s sound accordingly on the Smartphone.
Applying TuneIt
During sound setting, the VOLUME indicator may
The installed TuneIt App should be launched on the
blink.
Smartphone before connection to the head unit. TuneIt, is
downloadable from Apple’s App Store; the Android user
NOTE:
can download it from Google Play. For details, consult
• Volume and sound parameter preset function cannot
your Alpine dealer.
be adjusted via Smartphone.
Before these operations, set Alpine APP to USB or BT
depending on the connected Smartphone. For details, • The setting cannot be done on both the Smartphone
refer to “Setting the communication mode with a Smartand this unit at the same time. While the sound
phone (Alpine APP)” on page 75.
function of this unit is set via the Smartphone, sound
function settings on CDE-164BT will be displayed as
NOTE:
“APP Connect”.
• The application program and the related specifications
and data may be deleted or terminated without notice.
SOUND SETTING 65
• When the unit is powered off or during a call, sound
setting cannot be done via the Smartphone.
2. Turn the Rotary encoder to select the desired mode,
and then press
/ENTER .
• This function may not be available depending on the
paired Smartphone.
Like*1 ↔ Replay ↔ Next ↔ Previous ↔ TTS Volume*2 ↔ Like
• Please obey all local traffic laws while using this
function.
*1 Not displayed only when the received Notification
is Message type.
Facebook Notification Function
*2 It can also be set in SETUP section. For details, refer
to “Setting the TTS (Text To Speech) volume” on page
76.
NOTE:
• Depending on the paired Smartphone, the following
functions may not available even though the TuneIt
version is updated.
Like:
Receiving Notification (Ready On Future Update)
When the Smartphone connected to this unit receives
notification from Facebook, it will BEEP and the
SOURCE key blinks (depending on the TuneIt settings on
the phone). At the same time, the user’s name is shown in
the display (20 characters maximum).
1. While receiving Notification from Facebook, press
/SOURCE button.
Notification Menu screen is displayed.
Replay:
Next:
Previous:
TTS Volume:
The Smartphone feedbacks to
Facebook with “Like”, and meanwhile, the received Wall Posts or
Comments is played back by TTS
(Text To Speech).
To play back Notification by TTS
(Text To Speech) again.
To select the next Notification.
To select the previous Notification.
To adjust the playback volume of
TTS (Text To Speech).
6
66 SOUND SETTING
NOTE:
• Press
to return to the previous mode.
2. Turn the Rotary encoder to select the desired Notification, and then press
/ENTER .
3. Then go to step 2 of “Receiving Notification”.
• A new received Notification prompt will last for
30 seconds. If there is no operation within 30 seconds, NOTE:
the unit will return to normal mode.
• When there is no Notification, “No Notification” will
• When this unit is powered off or during a call,
be displayed.
Notification of Smartphone will not be prompted by
• The displayable amount of the Notification list dethis unit.
pends on the connected Smartphone.
• In 3WAY mode, the TTS sound is output from all of
• If no operation is performed for 60 seconds, the unit
speaker in car. In 2WAY mode, the TTS sound is only
will return to normal mode automatically.
output from Front Left/Right speaker.
Displaying Notification List
You can view the received Notification from Facebook in
the connected Smartphone via this unit.
1. Press and hold
/SOURCE for at least 2 seconds.
The received Notification will be displayed according
to when it was posted.
SETUP
CONTENTS
䡵 SETUP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .68
▫ Tuner Setting . . . . . . . . . . . . . . . . . . . . . . . . .74
▫ Setting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .68
▫ iPod&USB Setting . . . . . . . . . . . . . . . . . . . . . .75
▫ General Setting . . . . . . . . . . . . . . . . . . . . . . . .69
▫ Application Setting (APP) . . . . . . . . . . . . . . . .75
▫ Display Setting . . . . . . . . . . . . . . . . . . . . . . . .72
7
68 SETUP
SETUP
Use steps 1 to 5 to select one of the SETUP modes to
modify. See the applicable section below for details
about the selected SETUP item.
1. Press and hold AUDIO/SETUP for at least two seconds to activate the SETUP mode.
2. Turn the Rotary encoder to select the desired item, and
/ENTER.
then press
Audio*1 ↔ General ↔ Display ↔ Tuner ↔
SiriusXM*2 ↔ iPod&USB ↔ Application ↔
Bluetooth*3 ↔ Audio
General:
1
2
3
4
5
— AUDIO/SETUP
/Enter
—
— Rotary Encoder
— Fast-Forward Buttons
— DIM. Button
6
7
8
9
—
—
—
—
6
Fast-Rewind Buttons
BACK Button
SOURCE Button
Setting
You can flexibly customize the unit to suit your own
preferences and usage. From the SETUP menu, General
Setting, Display Setting, etc. can be modified.
CLOCK MODE↔ CLOCK ADJ*4 ↔ PWR CLOCK ↔
AUX SETUP ↔ AUX NAME*5 ↔ INT MUTE ↔ PLAY
MODE ↔ STAY ON ↔ DEMO MODE ↔ CLOCK
MODE
Display:
ILLUMINATI ↔ DIMMER ↔ TEXTSCROLL ↔
SCROLLTYPE ↔ ILLUMINATI
Tuner:
TUNER FREQ ↔ FM SET ↔ TUNER FREQ
SETUP 69
iPod:
NOTE:
IPOD LIST
• Pressing
Application:
ALPINE APP ↔ TTS VOLUME ↔ ALPINE APP
• If no operation is performed for 60 seconds, SETUP is
canceled.
*1 Refer to “Sound Settings”
General Setting
*2 Refer to “SiriusXM Setting”
General is selected on the setup main menu in step 2.
*3 Refer to “BLUETOOTH SETUP”
Setting The Clock Display (Clock Mode)
*4 Refer to “Setting Time”
You can select the clock display type, 12-hour or 24-hour,
depending on your preference.
*5 Displayed only when AUX SETUP is ON.
3. Turn the Rotary encoder to select a setting item, and
/ENTER.
then press
(e.g. Select AUX SETUP)
returns to the previous SETUP mode.
• Setting item: Clock Mode
Setting contents:
12H (Initial setting) / 24H
4. Turn the Rotary encoder to change the setting, and Turning The Clock Display ON/OFF
/ENTER.
then press
Setting item: PWR CLOCK
(e.g. Select ON or OFF)
Setting contents:
5. Press and hold AUDIO/SETUP for at least two secOFF / ON (Initial setting)
onds to return to normal mode.
OFF: The clock isn’t displayed when the power is off.
ON: The clock is displayed when the power is off.
7
70 SETUP
Setting The AUX SETUP mode
Turning Mute Mode On/Off (INT MUTE)
You can input the audio of an external device, (such as a If a device having the interrupt feature is connected,
Portable audio player) to the AUX connector of this unit. audio will be automatically muted whenever the interrupt signal is received from the device.
• Setting item: AUX SETUP
Make sure the Audio Interrupt In Lead (Pink/Black) is
Setting contents:
connected to the terminal where the voltage becomes 0 V
OFF / ON (Initial setting)
(GND) when a sound from External Unit is input into
AUX. Otherwise, this function may not operate. For
OFF:
details, refer to “Connections”.
When set to OFF, AUX source cannot be selected.
Setting item: INT MUTE
ON:
Setting contents:
Set to ON, when the portable device is connected. If
OFF AUX (Initial setting) / ON
/SOURCE is pressed and AUX is selected, the
sound of the portable device is input to the unit.
OFF AUX: When the interrupt signal is received from
device, the AUX source volume will be output from the
Setting The AUX NAME Mode
unit.
You can change the AUX NAME display in the SETUP
ON: When the interrupt signal is received from device,
mode.
no sound will be output.
• Setting item: AUX Name
Playing MP3/WMA Data (Play Mode)
Setting contents:
This unit can play back CDs containing both CD and
AUXILIARY (Initial setting) / TV / DVD / POR- MP3/WMA data (created in Enhanced CD (CD Extra)
format). However, in some situations, playback of an
TABLE / GAME
SETUP 71
enhanced CD may be difficult. In this case, you can select
playback of a single session only, containing the CD data.
When a disc contains both CD and MP3/WMA data,
playback starts from the CD data portion of the disc.
continue enjoying music for the selected period. If 6 is not
pressed, the unit will power off within 15 seconds.
During this period, you can only receive a call by
operating a paired Smartphone.
• Setting item: Play Mode
Setting item: STAY ON
Setting contents:
Setting contents:
CD-DA / CDDA/MP3 (Initial setting)
OFF (Initial setting) / 5 MIN / 15 MIN / 30 MIN
CD-DA:
NOTE:
Only the CD data in Session 1 can be played back.
• Note that there is a possibility that the battery may be
drained if already weak, during this period.
CDDA&MP3/WMA:
CD data, MP3/WMA/AAC files in mixed mode, and
multi-session discs can be played back.
• The setting result of STAY ON will be cleared if you
switch the 2WAY/ 3WAY system mode.
Demonstration
NOTE: Perform this setting before inserting a disc. If a
This unit has a demonstration feature for the display.
disc has already been inserted, remove it.
Setting The Stay On Mode
• Setting item: Demo Mode
You can set the delay in turning OFF the unit’s power
Setting contents:
after the vehicle’s ignition is turned off (ACC OFF). When
ON (Initial setting) / STANDBY / OFF
you select a mode other than OFF, the music will be
paused after you turn the ignition key off (ACC OFF). At ON: The unit starts the demonstration if there is no
the same time, the prompt “PRESS PRESET 6 TO STAY operation for 30 seconds.
ON” will scroll once. Press 6 within 15 seconds to
7
72 SETUP
STANDBY: Quit the demonstration mode. Note that if 1. After entering CUSTOMIZE, turn the Rotary encoder
to select a color (RED, GREEN, BLUE) you want to
this unit is disconnected from the vehicle’s battery, the
adjust, and then press ENTER.
next time you use this unit the DEMO mode will be ON.
OFF: Quit the demonstration mode completely.
Display Setting
Display is selected on the setup main menu in step 2.
Changing Lighting Color
You can change the lighting color of the unit’s buttons.
Setting item: ILLUMINATI
Further setting items: KEY & DISP( Key & Display ) /
KEY ( Key ) / DISP* ( Display )
Setting contents:
OPTION / CUSTOMIZE
OPTION: A total of 30 colors can be selected.
CUSTOMIZE: If there is no color you prefer in OPTION,
you can customize the color as follows.
* You can change the lighting colour of keys and display
simultaneously or respectively by selecting KEY or KEY/
DISP.
2. The adjusted color will blink, turn the Rotary encoder
to select a value (0-60).
R is red, G is green and B is blue.
3. Press ENTER or BACK to finish the color setting.
4. Repeat steps 1 to 3 to set another color.
NOTE:
• In step 2, you can switch to another color setting mode
by pressing SEEK UP or SEEK DOWN.
• The setting values in OPTION mode and CUSTOMIZE
mode are linked, when the setting value in CUSTOMIZE is different from the one in OPTION, “USER” will
be displayed in OPTION mode.
• During CUSTOMIZE setting, at least one setting value
should be greater than 20.
SETUP 73
Dimmer Control
Manual:
Set the Dimmer control to Auto to decrease the illumination brightness of the unit with the head lights of the
vehicle ON. This mode is useful if you feel the unit’s
backlighting is too bright at night.
The display is scrolled when a disc is loaded or when
a track is changed, etc.
• Setting item: Dimmer
The current text information of CD, folder, tag, etc. is
scrolled automatically.
Setting contents:
AUTO (Initial setting) / ON / OFF
NOTE: You can also adjust this item by pressing and
holding DIM.
Scroll Setting (Text Scroll)
Auto:
NOTE:
• The unit scrolls CD text names, folder names, file
names or tag display.
Scroll Type Setting
Choose the type you prefer from two scrolling methods.
This CD player can scroll the disc and track names
recorded on CD-TEXT discs, as well as text information • Setting item: SCROLLTYPE
of MP3/WMA/AAC files, folder names, tags, HD Radio
Setting contents:
broadcasts and SiriusXM.
TYPE 1 / TYPE 2 (Initial setting)
• Setting item: TEXTSCROLL
TYPE 1:
Setting contents:
The characters scroll from right to left, one character at
Manual (Initial setting) / Auto
a time, until the entire title has scrolled.
7
74 SETUP
TYPE 2:
Setting contents:
Words are built up from left to right, a single character
at a time. When the display is full, it is cleared and the
subsequent words are displayed the same way until all
words of the title have been shown.
Hi-Fi / Normal (Initial setting) / Stable
Hi-Fi:
High-quality setting
Tuner Setting
Normal:
Tuner is selected on the setup main menu in step 2.
Standard setting
Setting The TUNER (FM) Frequency Step (TUNER
FREQ)
Stable:
Control noise
During manual tuning, you can select the frequency step
1. Press and hold AUDIO/SETUP for at least two secfor FM analog radio station searching.
onds to activate the SETUP mode.
Setting item: TUNER FREQ
2. Turn the Rotary encoder to select Tuner Setting, and
Setting contents:
press
/ENTER.
200KHZ (Initial setting) / 100KHZ
Setting The TUNER (FM) Tone Quality
3. Turn the Rotary encoder to select FM Tuner Setup, and
/ENTER.
press
This unit can set your preferred tone quality for FM radio 4. Turn the Rotary encoder to select either Hi-Fi, Normal
/ENTER.
(Initial setting) or Stable, and press
source.
5. Press and hold AUDIO/SETUP for at least two sec• Setting item: FM Tuner Setup
onds to return to normal mode.
SETUP 75
NOTE:
• For search mode details, refer to “Searching for a
desired song” on page 95.
• Noise may be more noticeable when Hi-Fi is set,
depending on the reception status. In this case, the Application Setting (APP)
Normal setting is recommended.
Application is selected on the setup main menu in step 2.
iPod&USB Setting
Setting The Communication Mode With A
iPod&USB is selected on the setup main menu in step 2. Smartphone (Alpine APP)
iPod/iPhone Search Mode Setting
Set Alpine APP to USB when an iPhone is connected, or
set to BT when an Android Smartphone is paired.
The unit allows you to search for the iPod/iPhone using
nine different search modes.
• Setting item: ALPINE APP
• Setting item: IPOD LIST
Setting contents:
• Further setting items: PLAYLISTS / ARTISTS
/ALBUMS / AUDIOBOOKS / PODCASTS /
GENRES / COMPOSERS / SONGS / GENIUS MIX
USB (Initial setting) / BT / OFF
Setting contents:
OFF / ON
USB:
When an iPhone is connected to CDE-HD149BT’s USB
port, you can enjoy Pandora program the unit’s sound
tuning parameters, or communicate with SNS.
NOTE:
BT:
• When the search mode is in Playlists/Artists/
Albums/Podcasts/Genres/ Songs/Genius Mixes, the
initial setting is On, and when the search mode is in
Audiobooks/Composers, the initial setting is Off.
Set this when an Android Smartphone is paired with
this unit via BLUETOOTH technology. At this time,
you can enjoy Pandora, program the unit’s sound
tuning parameters, or communicate with SNS.
7
76 SETUP
OFF:
Setting The TTS (Text To Speech) Volume
No Smartphone is connected.
This function allows for readout of comments, etc., on a
Smartphone, and outputs sound from the speaker of the
unit.
NOTE:
• It takes a few seconds to validate this function.
• Setting item: TTS Volume
• For this function to work properly, specific applicaSetting contents:
tions must be installed on your Smartphone before
0~35
connection. Consult your Alpine dealer or the Alpine
website for details.
NOTE:
• Only the iPhone and certain Android/BlackBerry • The initial volume level is 12.
Smartphones support this function.
BLUETOOTH HANDS FREE CALLING
CONTENTS
䡵 BLUETOOTH HANDS FREE CALLING . . . . . . . .78
▫ Hands-Free Phone Control . . . . . . . . . . . . . . . .87
▫ Setup Before Using . . . . . . . . . . . . . . . . . . . . .79
▫ Bluetooth Audio Operation . . . . . . . . . . . . . . .94
▫ BLUETOOTH Setup. . . . . . . . . . . . . . . . . . . . .81
8
78 BLUETOOTH HANDS FREE CALLING
BLUETOOTH HANDS FREE CALLING
NOTE:
• Always drive safely with your hands on the steering
wheel and obey all applicable laws. You have full
responsibility and assume all risks related to the use of
the features and applications in this vehicle. Only use
the features and applications in this vehicle when it is
safe to do so. Failure to do so may result in an accident
involving in serious injury or death.
• Any voice commanded system should be used only in
safe driving conditions following all applicable laws.
Your attention should be focused on safely operating
the vehicle. Failure to do so may result in a collision
causing serious injury or death.
1—
/SOURCE
2 — AUDIO/SETUP
/ENTER
3—
4 — Rotary Encoder
Fast Forward
5—
6 — Phone/Voice CTRL.
Button
7 — Presets Buttons (1–6)
8—
Forward
Rewind
9—
View
10 —
Fast Rewind
11 —
12 —
Play/Pause
13 — BACK Button
14 — BAND/ABC SEARCH
BLUETOOTH HANDS FREE CALLING 79
Setup Before Using
About BLUETOOTH
BLUETOOTH is a wireless technology allowing communication between a mobile device or personal computer
over short distances. This enables a hands-free call or
data transmission between BLUETOOTH compatible devices. BLUETOOTH transmission is available in the
unlicensed 2.4 GHz spectrum if the distance between
devices is within 10 meters. For details, refer to the
BLUETOOTH Home page (http://www.bluetooth.com).
• Depending on the connected BLUETOOTH compatible device(s), the function may differ. Also refer to the
Owner’s Manual of the connected device(s).
• When you search for this unit using the BLUETOOTH
compatible phone, the unit name is displayed as
“Alpine CD Receiver”.
Before Using BLUETOOTH Function
Before using the BLUETOOTH function, the following
settings need to be made.
Set “Bluetooth IN” to ON when you want to use Hands-Free
phone or Bluetooth Audio function. Refer to “Setting the
Depending on the BLUETOOTH version, a BLUETOOTH Connection (Bluetooth IN)” on page 82.
BLUETOOTH compatible device may not be able to
NOTE:
communicate with this unit.
• Before using BLUETOOTH function, it must be paired
Proper function of this unit with all BLUETOOTH
with this unit. Refer to “How to connect to a
compatible devices is not guaranteed. For handling of
BLUETOOTH compatible device (Pairing)”.
the BT compatible device, consult your ALPINE dealer
How To Connect To A Bluetooth Compatible
or ALPINE website.
Device (Pairing)
Depending on the surroundings, BLUETOOTH wireFor details on the control from a BLUETOOTH compatless connection may be unstable.
ible device, refer to the Owner’s Manual of the
When you place a call, or perform setup operations, be BLUETOOTH compatible device.
sure to stop your car in a safe place.
NOTE:
•
•
•
•
8
80 BLUETOOTH HANDS FREE CALLING
Pairing a BLUETOOTH compatible device with
SSP (Secure Simple Pairing)
3. If the pairing was successful, “Connected” is displayed for a few seconds. The head unit then returns
to its previous state.
1. Using your BLUETOOTH compatible device, select
NOTE:
the “Alpine CD Receiver” for pairing.
2. Turn the Rotary encoder to change the head unit • If the connection is unsuccessful, “Failed” is displayed.
display from “Pairing NO” to “Pairing YES”, and then
• After a successful pairing, the two devices should
/ENTER.
press
reconnect automatically whenever the vehicle’s igniIf “Pairing NO” is selected, the connection will be
tion is turned ON. If the auto connection fails, try to
canceled.
reconnect manually.
3. If the pairing was successful, “Connected” is dis- • Set “Visible Mode” to ON to enable this unit to be
played for a few seconds. The head unit then returns
recognized by a BLUETOOTH compatible device, refer
to its previous state.
to “Setting the Visible Mode”.
• You can also manually pair the BLUETOOTH devices
from this unit. For details, refer to “Pairing a
BLUETOOTH Device from the unit”.
1. Using your BLUETOOTH compatible device, select
the “Alpine CD Receiver” for pairing.
Auto Pairing With A iPod/iPhone
Pairing a BLUETOOTH compatible device without
SSP (Secure Simple Pairing)
2. Input the passcode (“0000”) in a BLUETOOTH com- When an iPod/iPhone is connected to the USB port, the
patible device.
unit will automatically pair with it.
NOTE:
• The passcode is fixed as “0000”.
1. Make sure USB PAIR is set to ON. Refer to “Setting the
Auto Pairing with iPod/iPhone”.
2. Connect an iPod/iPhone to this unit’s USB port.
BLUETOOTH HANDS FREE CALLING 81
3. Turn the Rotary encoder to select “PAIR YES”, and BLUETOOTH Setup
then press ENTER. *
The following steps one to five are common to the
If “PAIR NO” is selected, the connection will be various BLUETOOTH functions. For details, refer to each
canceled.
individual function.
* Depending on the iOS version, you may need to turn NOTE:
on the Bluetooth function manually on the iPod/
• Set “Bluetooth IN” to ON, and then perform
iPhone side, then perform this step.
BLUETOOTH SETUP operation. Refer to “Setting the
4. If pairing is successful, “CONNECTED” is displayed
BLUETOOTH Connection (Bluetooth IN)” on page 82.
for a few seconds. The head unit then returns to its
1. Press and hold AUDIO/SETUP for at least two secprevious state.
onds to activate the SETUP mode.
NOTE:
2. Turn the Rotary encoder to select “Bluetooth”, and
• If the device has been paired with this unit previously,
/ENTER.
then press
it will not USB Pair automatically.
The BLUETOOTH setup mode is activated.↔
• If the connection is unsuccessful, “FAILED” is
3. Turn the Rotary encoder to select the desired items
displayed.
/ENTER.
and then press
• After a successful pairing, the device and this unit
BLUETOOTH:
should connect automatically whenever the vehicle’s
Bluetooth IN*1↔Paired Device*2↔Visible Mode*1/*2
ignition is turned ON. If the auto reconnect fails, try to
↔Search Device*1/*2↔Call Sound*2↔Caller ID*2↔
connect manually.
PB Update*1/*2 ↔ PB Order*2 ↔ Auto Answer*2 ↔
• Set “VISIBLE M” to ON, so this unit is visible to other
Service Name*2 ↔ Speaker Select*2 ↔ FW Version*2
Bluetooth compatible devices. Refer to “Setting the
↔ FW Update*1/*2 ↔ Bluetooth IN
Visible Mode”.
8
82 BLUETOOTH HANDS FREE CALLING
*1 The items are not displayed during a phone call.
*2 The items are not displayed if “Bluetooth IN” is set
to OFF. Refer to “Setting the BLUETOOTH Connection
(Bluetooth IN)”.
4. Turn the Rotary encoder to change the settings.
5. Press and hold AUDIO/SETUP for at least two seconds.
The SETUP mode is canceled.
• Setting item: Bluetooth IN
Setting contents:
OFF / ON (Initial setting)
OFF:
Hands-Free Phone function and Bluetooth Audio function are not used.
ON:
Select when you want to pair your BLUETOOTH
NOTE:
compatible phone with this unit or use Bluetooth
to return to the previous mode.
• Press
Audio function.
• If no operation is performed for 60 seconds, the unit
NOTE:
will return to normal mode automatically.
• When Bluetooth IN is set to OFF, the indicators related
battery quantity and
to Hands-free phone (
With BLUETOOTH technology, you can place a handssignal strength) will not be displayed.
free call by a BLUETOOTH-equipped Smartphone.
Setting The Auto Pairing With iPod/iPhone
Audio information of a BLUETOOTH compatible Smartphone, a portable audio player, etc., is controllable/ By setting this item to ON, the unit will auto pair when
an iPod/iPhone is connected to this unit via the USB
playable wirelessly from this unit.
port.
Setting The BLUETOOTH Connection (Bluetooth IN)
BLUETOOTH HANDS FREE CALLING 83
Setting item: USB PAIR
NOTE:
Setting contents:
• If the connection is successfully changed, “Connected”
indicator
is displayed for two seconds and the
lights up, then the display returns to the SETUP
screen.
OFF / ON (Initial setting)
OFF: Turn off the auto pair function.
ON: Auto pair when an iPod/iPhone is connected to this • If a Smartphone is connected to this unit successfully,
indicator lights up to show the battery charge
the
unit via the USB port.
indicator
of the connected Smartphone. The
NOTE: USB Auto-Pairing cannot take place if either
lights up when the battery charge is about 50%, the
device has been paired previously. Make sure the device
indicator lights up when the battery charge is not
name of both has been deleted from each device.
enough, and it blinks as a low level warning. The
Setting The BLUETOOTH Device
indicator goes out when the battery is drained.
At
this time, the BLUETOOTH function is unavailSelect one of five connected BLUETOOTH compatible
able due to the Smartphone powered off.
devices that you previously registered.
• Indicator
(Signal Strength) will display the current signal strength of your service provider. The
1. Turn the Rotary encoder to select a Bluetooth compatindicator goes out when the Smartphone is not
ible device you want to use (you want to change
in service area or receives no signal.
connection), and then press ENTER.
• Depending on the connected Smartphone, the
(bat2. Turn the Rotary encoder to select “CONNECT” to
tery charge), and
(signal strength) indicators
connect the selected device.
may not be displayed.
The connected device is marked with “l”. Select “DISCONNECT” to disconnect this device. Select “CLEAR”
when you want to clear the device from the device list.
• Setting item: PAIRED DEV
8
84 BLUETOOTH HANDS FREE CALLING
• If all the five positions have been registered, you
cannot register the 4th device. To register another
device, you need to delete one of the devices from
position 1 to 3 first.
Adjusting The Volume (SOURCE VOL)
Setting The Visible Mode
• Setting contents:
You can set whether this unit can be recognized or not
from a BLUETOOTH compatible device. Normally set
this to ON.
• Setting item: Visible M
You can emphasize or weaken the volume level of the
Phone call, the ring tone and the microphone input to fit
your own preferences.
Phone Talk:
−5 dB ~ +5 dB
Ring Tone:
OFF:
−5 dB ~ +5 dB
Disable recognition of this unit from the BLUETOOTH
compatible device.
MIC Gain:
−5 dB ~ +5 dB
ON: (Initial Setting)
NOTE: The initial setting of PHONE TALK / RING
Enable recognition of this unit from the BLUETOOTH TONE / MIC GAIN is 0.
compatible device.
Sound Auto Setting (Type Set)
Setting The Bluetooth Sound Quality
Depending on your calling environment, choose one of
You can flexibly customize the sound of a call to fit your the settings below which gives the best sound quality.
own preferences.
Setting contents: TYPE1 (Initial setting) / TYPE2 /
TYPE3 / TYPE4 / TYPE5
• Setting item: Call Sound
TYPE1:
• Further setting items: Source VOL/Type Set
Standard Mode (recommended)
BLUETOOTH HANDS FREE CALLING 85
TYPE2:
Enhances the noise reduction
TYPE3:
Enhances the echo-cancel
TYPE4:
Enhances both noise reduction and echo-cancel
TYPE5:
Weakens both noise reduction and echo-cancel
NOTE:
• Setting item: Caller ID
Setting contents:
OFF / ON (Initial setting)
If you want to keep the ID information of the caller from
others, set this item to OFF. Depending on the stored ID
information, while you are dialing a number or a call is
dialing in, only telephone number will be displayed or
telephone name will be displayed as “NO Name”; During a call, “NO Name” will be displayed.
• The functions below are designed to improve the
Setting The Phone Book Update
sound quality of the outgoing call.
Noise reduction: This function can reduce the road You can update the phone book automatically or manunoise, but excessive enhancement may affect the sound ally.
quality of the call.
• Setting item: PB Update
Echo-cancel: This function can reduce the echo, but
Setting contents:
excessive enhancement may affect the sound quality of
Auto / Manual
the call.
Setting the Caller Information Display ON/OFF
Setting The Phone Book Auto Update ON/OFF
(Auto)
You can choose whether to use these functions according
When you select ON in this step, whenever the vehicle’s
to the following setting.
ignition is turned ON or after the phone is reconnected
with this unit, the phone book will be updated automatically.
8
86 BLUETOOTH HANDS FREE CALLING
• Setting contents:
Auto OFF / Auto ON (Initial setting)
NOTE:
• Setting item: PB Order
Setting contents:
First Name (Initial setting) / Last Name
• Updating” will be displayed during the phone book NOTE:
update.
• “Waiting” will be displayed while the Phone book
order is switching. You can cancel the “Waiting” screen
Setting The Phone Book Manual Update ON/OFF
to perform other operations by pressing
when the
(Manual)
ordering is still in progress. The phone book is not
When you select YES in this step, the phone book will be
accessible during this time. In addition, the ordering
updated immediately regardless if the Auto update funcmay affect the playback of Bluetooth Audio.
tion is on or off.
Selecting The Output Speaker
• Setting contents:
Choose the speaker in your vehicle from which you want
NO (Initial setting) / YES
to hear the call.
NOTE:
• Setting item: Speaker SL
• “Updating” will be displayed during the phone book
Setting contents:
update.
ALL (Initial setting) / F-L / F-R / F-LR
Changing The Phone Book List Order
ALL:
The phone book is listed alphabetically by the first letter
of First or Last Name.
Listing by First Name is the default but Last Name can be
selected.
The sound be output from all of speakers in car.
BLUETOOTH HANDS FREE CALLING 87
F-L:
• Setting item: FW Update
The sound only be output from the front left speaker.
Setting contents:
F-R:
NO (Initial setting) / YES
The sound only be output from the front right speaker. Hands-Free Phone Control
F-LR:
About The Hands-Free Phone
The sound be output from the front left and front right Hands-free calls are possible when using a HSP (Head
Set Profile) and HFP (Hands-Free Profile) compatible
speaker.
Smartphone with this unit.
NOTE: In 3WAY mode, the call sound is output from all
NOTE:
of speaker in car.
Displaying The Firmware Version
The current firmware version will be displayed.
• Setting item: FW Version
Updating The Firmware
Future BLUETOOTH firmware updates may become
available for phone interoperability.
• Avoid performing a hands-free call in heavy traffic or
on narrow or winding streets.
• Close the windows while calling to reduce background
noise.
• If both calling parties are using hands-free devices, or
the call is made in a noisy location, difficulty hearing
the other person’s voice is normal.
For detailed information and operation to update your • Depending on telephone line conditions or certain
BLUETOOTH firmware, please visit Alpine home page
mobile devices used, voices may sound unnatural.
(http://www.alpine-usa.com).
• When using a microphone, speak as directly as you can
into the microphone to pick up the best sound quality.
8
88 BLUETOOTH HANDS FREE CALLING
• Certain Smartphone features are dependent on the
capabilities and settings of your service provider’s
network. Additionally, certain features may not be
activated by your service provider, and/or the provider’s network settings may limit the feature’s
functionality.
NOTE:
• While calling, the source sound on the unit is muted.
After calling, playback will resume.
Hanging Up The Telephone
Press
.
• Always contact your service provider about feature The call finishes.
availability and functionality.
NOTE:
• All features, functionality, and other product specifi.
cations, as well as the information contained in the • You can also hang up the call by pressing
Owner’s Manual are based upon the latest available Calling
information and are believed to be accurate at the time
Call History is recorded for the last dialed/received/
of printing.
missed calls (20 records for each). There are various ways
• Alpine reserves the right to change or modify any of making calls based on the “Calling”. The following
information or specifications without notice or steps 1 to 5 are common to the various ways of making
obligation.
these calls. For details, refer to each individual category
for making calls.
Answering A Call
.
Incoming calls are announced by the received call ring 1. Press
tone and a displayed message (Phone).
The outgoing method list is displayed.
or press
/ENTER.
Press
2. Turn the Rotary encoder to select the outgoing mode.
The call starts.
Dialed:
Dialed history
BLUETOOTH HANDS FREE CALLING 89
Received:
5. Press
/ENTER.
Received history
The selected telephone number will be called.
Missed:
If one name has several numbers registered in the
/ENTER after selecting the
telephone book, press
name*, then turn the Rotary encoder to choose the
/ENTER, the teledesired number and press
phone will be called.
Missed incoming history
Phone Book:
Smartphone phone book
3. Press
/ENTER
* If the name cannot be recognized, “NO Name” will
be displayed.
The outgoing mode is activated, and each mode list is
NOTE:
displayed.
to return to the previous mode.
• Press
NOTE:
• It may take some time for the list to be displayed, • If no operation is performed for 60 seconds, the unit
and also directly after connection, the list may not be
will return to normal mode automatically.
brought up to date.
Redialing A Number In Outgoing History
4. Turn the Rotary encoder to select a name or a telePreviously dialed telephone numbers (maximum numphone number from the list.
ber of call record is 20) are stored in dialed calls history.
You can redial a number by searching from dialed calls
NOTE:
• You can use Phone book alphabet search function to history.
search a name or number from Phone Book. For
details, refer to “Phone book Alphabet Search Function” on page 90
8
90 BLUETOOTH HANDS FREE CALLING
• Setting item: Dialed
NOTE:
• The order of the list display depends on the setting of
“PB Order” (refer to “Changing the Phone book List
Telephone numbers (maximum number of call record is
Order”.
20) from received calls are stored in the Received List.
You can redial these numbers by searching here.
• If the call history or phone book of the Smartphone is
added or deleted while it is connected to the unit, the
• Setting item: Received
list displayed on the unit may not be brought up to
Dialing A Number In Incoming Missed Call
date. If it is not updated, you cannot correctly place a
History
call.
Dialing A Number In Incoming History
Telephone numbers (maximum number of call record is • You can display the information of a number stored in
20) for received calls that are missed, are stored in the
phone book by pressing
VIEW. Each press
Missed List. You can redial these numbers by searching
changes the display as Name → Telephone NO./
here.
Telephone label* → Name If the information cannot
be obtained, “NO Name” or “NO Number” will
• Setting item: Missed
display.
Dialing a Number In The Phone Book
* The telephone label of a number depends on the
Up to 1,000 names (at most 3 telephone numbers for each number information stored in Phone book of the Smartname) are downloadable from a Smartphone. Dial a call phone, which includes 4-type icons-(Mobile), (Home),
by selecting a person from the phone book list.
(Work), and (Other).
• Setting item: Phone Book
Phone Book Alphabet Search Function
You can select the first three letters to search for a desired
name in phone book list by using the Phone book
alphabet search function.
BLUETOOTH HANDS FREE CALLING 91
For example:
NOTE:
Searching a name “Michael James”.
• The Alphabet Search Function is only applicable to
English alphabet characters.
The following example explains how the search is performed.
• If the selected name has several numbers registered in
phone book, you need to turn the Rotary encoder to
Depending on the setting in PB Order (refer to “Changselect the desired number, and then press
ing the Phone book List Order”), the phone book is listed
/ENTER.
in first name or last name order. Please search for the first
• Press
in step 3 or 4 to delete the current entry and
name or last name according to the setting.
return to the previous step.
1. Press BAND/ABC Search while in the phone book list,
• You can search for a name by its first letter, first two
the phone book alphabet search mode is activated.
/ENTER after
letters or first three letters. Press
• The letter selection screen is displayed.
entering the desired number of letters. A list dis2. Turn the Rotary encoder to select the first letter
plays the names beginning with the entered
.
(e.g. M), and then press
letter(s).
3. Turn the Rotary encoder to select the second letter Voice Control Operation
.
(e.g. I), and then press
When a Smartphone equipped with voice recognition
4. Turn the Rotary encoder to select the third letter function is paired with this unit. The Smartphone can be
(e.g. C), and then press
/ENTER.
controlled by Voice Control via this unit.
5. Turn the Rotary encoder to select the desired name Press and hold VOICE CTRL. for at least two seconds to
/ENTER to activate the Voice Recognition mode.
(e.g. Michael James), and then press
make the call.
8
92 BLUETOOTH HANDS FREE CALLING
After the Voice Recognition mode is activated and
“Speak” is displayed, you can make a phone call, play a
song, etc., via this unit by inputting voice control commands*.
Call Waiting Function
If a second call is received during a current call, you can
have the first caller wait momentarily while you take the
second call. When you are finished with one call, you can
* Please refer to your Smartphone manual for other voice switch to the other one.
control commands.
If a second call is received during the current call (call1),
the information of second caller (call2) is displayed
instead of the current caller’s name. Press 2, the call
You can perform this operation only when a Voice recogwaiting mode is activated.
nition compatible Smartphone is connected. If the Smartphone is not compatible with the Voice recognition, “No In this case, call 1 is on hold, while you take call 2.
Support” is displayed for two seconds.
NOTE:
The Voice recognition function performance depends
• In the call waiting mode, press 1 or 2 to switch
on the recognition range of the Smartphone and
between the current call and the person on hold.
mounting location of the microphone. Please pay
• In the call waiting mode, press and hold 1 or 2 for at
attention when the microphone is mounted.
least 2 seconds to hang up call1 or call2, and the other
Voice recognition operation depends on the function of
call will be answered automatically. (The action dethe Smartphone. For details, refer to the Owner’s
pends on the paired device.)
Manual of the Smartphone.
VIEW to
• In the call waiting mode, you can press
If a called person that you say is not found, “No Call”
change the display between the current call and the
is displayed for two seconds.
person on hold.
Please obey all local traffic laws while using this
function.
NOTE:
•
•
•
•
•
BLUETOOTH HANDS FREE CALLING 93
Preset A Number In The Phone Menu (Shortcut
Dial)
• If you store a phone number in a preset with a
previously stored number, the current number will be
cleared and replaced by the new one.
Assign numbers that you dial frequently to presets for
quick recall. You can assign up to six frequently called Dialing The Preset Number
phone numbers to number presets.
1. Press any one of the preset buttons (1 through 6) that
Select a number you want to preset from the Phone Menu
has had a number stored in the phone mode.
list (Phone Book, Dialed Call, etc.). Press and hold any
The information (name/number) stored in the preset
one of the preset buttons (1 through 6) as the one that you
station is displayed.
wish to store the number for at least 2 seconds.
/ENTER or press
.
2. Press
The phone number you selected is stored in presets.
The stored preset number is dialed directly.
NOTE:
Adjusting The Volume When Receiving A Call
• If the name has several numbers registered in the
/ENTER after selecting the While calling, you can adjust the volume.
phone book, press
name. Turn the Rotary encoder to choose the de- Turn the Rotary encoder to adjust the volume.
sired number. Press and hold any one of the preset
buttons (1 through 6) for at least two seconds. The
selected number is stored as a preset number.
• A total of 18 phone numbers can be stored in the preset
memory ( 6 numbers for each Smartphone in the
paired device list). If a Smartphone is deleted from the
paired device list, the stored preset numbers of this
Smartphone are deleted, even when it is paired again.
8
94 BLUETOOTH HANDS FREE CALLING
While calling, press BAND or press and hold
for at
least two seconds to switch the call sound between the
• You may need to increase volume from your regular
unit and Smartphone.
audio listening source level. However, increasing the
volume excessively may result in feedback. Feedback NOTE:
is directly related to the volume. Turning down the
• Depending on the Smartphone, this operation may not
volume as low as acceptable, will reduce it. Positioning
be performed.
the microphone in a direction away from the main car
speakers (e.g. clipped on sun visor) may also reduce Bluetooth Audio Operation
feedback at high volume.
Audio information of a BLUETOOTH compatible SmartNOTE:
Muting the Microphone Input Quickly (Voice
Mute)
phone, a portable player, etc., is controllable/playable
wirelessly* from this unit.
While calling, activating the Voice Mute function will * To play back audio, a Smartphone or a portable player
instantly mute the microphone input. Your voice will not conforming to A2DP (Advanced Audio Distribution Profile) and AVRCP (Audio/ Video Remote Control Profile)
be heard by the caller.
is required.
to mute the microphone input.
While calling, press
Not all functions work with all devices.
Press
again will bring the microphone input back to
NOTE:
its previous volume level.
Call Switching Operation
• Set “Bluetooth IN” to ON when you want to use
Bluetooth Audio function. Refer to “Setting the
BLUETOOTH Connection (Bluetooth IN)” on page 82.
While making a call, this function allows you to initiate
the transfer of the audio between the Smartphone and the
• During a call, sound on the BLUETOOTH audio
speakers in the car.
source is muted.
BLUETOOTH HANDS FREE CALLING 95
• If you operate the Hands-free phone (e.g. searching in Selecting The Desired Group (Folder)
the phonebook) while using the Bluetooth Audio func- Press Rewind
or
Forward to select the desired
tion, BLUETOOTH Audio playback may be affected. Group (Folder).
Recalling The Bluetooth Audio Mode
Pressing and holding Rewind
or
Forward will
Press
mode.
/SOURCE to select the BLUETOOTH Audio change folders continuously.
NOTE:
Selecting The Desired Song
1. Press
.
• This function may not available depending on the
paired device.
Returns the beginning of the song being played back. Searching For A Desired Song
.
2. Press
Artist name, album name, etc., may be searched and
displayed during playback or pause.
Forwards the next song.
/ENTER to activate the search mode.
Pressing and holding
or
will fast backward/ 1. Press
fast forward track continuously.
2. Turn the Rotary encoder to select the desired Group
/ENTER.
(Folder), and then press
NOTE:
• The action depends on the paired device.
Pausing
Press
.
Playback stops. Pressing
back.
again will resume play-
3. Turn the Rotary encoder to select the desired album,
folder, etc., within the selected Group (Folder), and
/ENTER.
then press
4. Repeat step 3 if necessary until the desired song is
found.
8
96 BLUETOOTH HANDS FREE CALLING
NOTE:
• Search mode may differ depending on the connected
device.
• The pause mode may be canceled after the search.
• This function may not available depending on the
paired device.
ACCESSORIES
CONTENTS
䡵 FLASH MEMORY — IF EQUIPPED . . . . . . . . . . .98
▫ Random Play Shuffle (M.I.X.) . . . . . . . . . . . . .107
▫ Connecting The Flash Memory (Optional) . . . . .98
▫ Repeat Play . . . . . . . . . . . . . . . . . . . . . . . . .108
▫ Playback . . . . . . . . . . . . . . . . . . . . . . . . . . . .98
▫ Displaying The Text . . . . . . . . . . . . . . . . . . .109
▫ About MP3/WMA File Of Flash Memory . . . . .99 䡵 PANDORA INTERNET RADIO —
IF EQUIPPED. . . . . . . . . . . . . . . . . . . .
䡵 IPOD/IPHONE — IF EQUIPPED . . . . . . . . . . . .99
▫ Listening To Pandora . . . . . . . . . . . . .
▫ Connecting An iPod/iPhone . . . . . . . . . . . . .100
▫ “Thumbs” Feedback . . . . . . . . . . . . .
▫ Setting The iPod Control . . . . . . . . . . . . . . . .101
▫ Searching For A Desired Station . . . . .
▫ Playback . . . . . . . . . . . . . . . . . . . . . . . . . . .102
▫ Shuffle . . . . . . . . . . . . . . . . . . . . . . .
▫ Searching For A Desired Song . . . . . . . . . . . .102
▫ Bookmarking A Desired Song Or Artist
▫ Direct Search Function . . . . . . . . . . . . . . . . .105
▫ Creating A New Station . . . . . . . . . . .
▫ Select Playlist/Artist/Album/Genre/
Composer/Episode . . . . . . . . . . . . . . . . . . . .106
▫ Search Position Memory . . . . . . . . . .
▫ Alphabet Search Function . . . . . . . . . . . . . . .106
▫ Search Position Memory . . . . . . . . . . . . . . . .107
. . . . . .110
. . . . . .110
. . . . . .111
. . . . . .111
. . . . . .113
. . . . . .113
. . . . . .113
. . . . . .114
▫ Changing The Display . . . . . . . . . . . . . . . . . .114
9
98 ACCESSORIES
FLASH MEMORY — IF EQUIPPED
Playback
1. Press
SOURCE to select the USB mode.
2. To pause playback, press
resume playback.
. Pressing
again will
NOTE:
• This unit plays back files in Flash Memory with the
same controls and modes used for playback of CDs
containing MP3/WMA. For details, refer to “CD/
MP3/WMA”.
• The root folder is displayed as “\ROOT”.
1—
SOURCE
2 — USB Memory (Sold Separately)
3 — Cable (sold separately)
4 — USB Memory (sold separately)
Play/Pause
5—
Connecting The Flash Memory (Optional)
If a Flash Memory device is connected to the unit,
MP3/WMA files can be played back.
• Before disconnecting Flash Memory, be sure to change
to another source or set to pause.
• The playback time may not be correctly displayed
when a VBR (Variable Bit Rate) recorded file is played
back.
ACCESSORIES
About MP3/WMA File Of Flash Memory
99
IPOD/IPHONE — IF EQUIPPED
Playing Back MP3/WMA
MP3/WMA files are prepared, then stored to a Flash
Memory Device. This unit can recognize at most 255 folders and 255 files per folder stored in Flash Memory.
Playback may not be performed if a Flash Memory
Device exceeds the limitations described above. Do not
make a file’s playback time more than 1 hour.
Media Supported
This device can play back files stored on Flash Memory
devices designed for USB connection.
Corresponding File Systems
This device supports FAT 12/16/32 for Flash Memory 1 —
2—
devices.
3
4
5
6
7
Return
Source
Enter
— Rotary Encoder
—
Fast Forward
Random
—
—
Repeat
— Preset Buttons (1 through 6)
8—
Forward
Rewind
9—
10 —
View
11 —
Play/Pause
Fast Rewind
12 —
13 — Back Button
14 — Band/ABC Source
9
100 ACCESSORIES
Connecting An iPod/iPhone
NOTE:
An iPod/iPhone can be connected to this unit by using • Internet and telephone functions of the iPod touch or
the Interface cable for iPod (included with iPod/iPhone).
iPhone, etc., can also be used when connecting to this
When this unit is connected by using the cable, the
unit. However, using these functions will stop or
controls on the iPod are not functional.
pause the currently playing songs. At this time do not
operate the unit to avoid a malfunction.
• An iPhone connected to this unit is usable as an iPod
or a hands-free phone. The iPhone must be paired with
the unit’s Bluetooth to use the hands-free function.
• Do not leave an iPod/iPhone in a car, as its mechanism
is sensitive to high temperature and humidity conditions, and damage may result.
About iPod/iPhone models usable with this unit
1
2
3
4
—
—
—
—
Main Unit
USB Connection Terminal
Cord Included With iPod/iPhone
iPod/iPhone (sold separately)
• The following devices have been certified following
Made for iPod guidelines. Correct function of earlier
versions cannot be guaranteed.
iPod nano (7th generation): Ver.1.0.2
iPod touch (5th generation): Ver.7.0.4
iPod touch (4th generation): Ver.6.1.5
iPod nano (6th generation): Ver.1.2
iPod touch (3rd generation): Ver.5.1.1
ACCESSORIES
iPod nano (5th generation): Ver.1.0.2
iPod classic (160 GB) (Late 2009): Ver.2.0.4
iPod touch (2nd generation): Ver.4.2.1
101
• For clarity in identifying your model of iPod, please
see Apple’s own document “Identifying iPod models”
at http://support.apple.com/kb/HT1353.
iPod classic (120 GB): Ver.2.0.1
• This unit does not support video playback from iPod/
iPhone, even using a video-compatible cable.
iPod touch (1st generation): Ver.3.1.3
Setting The iPod Control
iPod nano (3rd generation): Ver.1.1.3
When an iPod/iPhone is connected, operate it from its
own controls or from the head unit.
iPod classic (80 GB, 160 GB): Ver.1.1.2
• The following devices have been certified following
Made for iPhone guidelines. Correct function of earlier
versions cannot be guaranteed.
iPhone 5s: Ver.7.1.1
iPhone 5c: Ver.7.1.1
/ENTER/OPTION for at least
1. Press and hold
2 seconds in the iPod mode.
The Option menu for iPod mode is activated.
2. Turn the Rotary Encoder to select “ APP Direct”, and
/ENTER.
then press
iPhone 5: Ver.7.1.1
The iPod control mode will switch between iPod
Mode and HU Mode.
iPhone 4s: Ver.7.1.1
HU Mode (HEAD UNIT):
iPhone 4: Ver.7.1.1
Operate the iPod/iPhone via this unit.
iPhone 3GS: Ver.6.1.6
iPod Mode:
iPhone 3G: Ver.4.2.1
Operate the iPod/iPhone using its own controls.
When iPod is selected, some functions will not be
operable via the head unit.
iPhone: Ver.3.1.3
9
102 ACCESSORIES
NOTE:
NOTE:
• During HU Mode, you can switch to iPod Mode • A song playing on the iPod/iPhone while it is condirectly by pressing BAND.
nected to this unit will continue to play from where it
was paused after disconnection.
• Once the control mode is changed, this will set pause
to continue.
status, press
• If you listen to an episode from a selected podcast or
audiobook, the episode can be changed by pressing
• Depending upon the iPod used, iPod control may not
or
Rewind.
Forward
be selectable. Or, if iPod is selected, operation must
• An episode may have several chapters. The chapter
still be from the head unit.
can be changed by pressing
or
.
Playback
Searching For A Desired Song
1. Press
SOURCE to switch to the iPod mode.
An iPod/iPhone can contain hundreds of songs. This
or
to select the desired song.
2. Press
unit utilizes various methods to make searches for dePressing and holding
or
will fast backward/ sired content as simple as possible.
fast forward the current song.
Each music category has its own individual hierarchy as
3. To pause playback, press
.
shown below. Choose a music category from the list
below to narrow searches quickly.
Pressing
again will resume playback.
ACCESSORIES
Hierarchy 1
Playlist
Artist*
Album*
Song
Podcast
Genre*
Composer*
Audiobook
Genius Mix list
Hierarchy 2
Song
Album*
Song
Episode
Artist*
Album*
—
—
For example:
Searching by Artist name.
The following example explains how an Artist search is
performed.
Another search mode can be used for the same operation,
although the hierarchy differs.
1. Press
mode.
/ENTER to activate the search selection
2. Turn the Rotary encoder to select the Artist search
/ENTER.
mode, and then press
Hierarchy 3
—
Song
—
—
—
Album*
Song
—
—
Shuffle All*1
Playlist
Song
Podcast
Genre
diobook
Genius Mix*2/*3
103
Hierarchy 4
—
—
—
—
—
Song
—
—
—
Artist
Album
Composer
AuShuffle All*1
*1 Refer to “Random Play Shuffle (M.I.X.)” on
page 107.
*2 Depending on the connected iPod/iPhone, Genius
Mix function may not be supported.
*3 When an iPod/iPhone with Genius Mix list created
by iTunes is connected to this unit, Genius Mix search
mode can be used to search a Genius Mix list.
9
104 ACCESSORIES
3. Turn the Rotary encoder to select the desired Artist, • In the search mode, pressing t will return to the
previous mode.
/ENTER.
and then press
4. Turn the Rotary encoder to select the desired Album, • When search is made during M.I.X. play, the M.I.X.
play mode will be canceled.
/ENTER.
and then press
5. Turn the Rotary encoder to select the desired Song, • When search is made during song downloading on
iPhone, “UPDATING” will be displayed for a few
and then press
/ENTER.
second and the search mode will be canceled.
The selected song is played back.
NOTE:
• “NO SONG” will be displayed if there are no songs in
the selected playlist in the PLAYLIST search mode.
• This function is unavailable when iPod MODE is
selected in “Setting the iPod Control” (refer to “Setting • “NO PODCAST” will be displayed if there is no
podcast data in the iPod/iPhone in the PODCAST
the iPod Control” on page 39). And “iPod CONTROL”
search mode.
will be displayed.
/ENTER for at least • “NO AUDIOBOOK” will be displayed if there is no
• After pressing and holding
audiobook data in the iPod/iPhone in AUDIOBOOK
two seconds while in each hierarchy (except SONG,
search mode.
AUDIOBOOK and GENIUS MIX List hierarchy), all
• NO GENIUS” will be displayed if there is no genius
mix list data in the GENIUS MIX search mode.
• Playback [ALL] is only applicable for those categories
marked with“*”, press and hold ENTER for at least • If “iPod name” stored in the iPod/iPhone is selected in
two seconds to play back all songs in the iPod/iPhone
/ENTER is pressed,
the Playlist search mode, and
or selected search mode.
you can search for all songs in the iPod/iPhone.
songs of the selected hierarchy are played back.
• If no operation is performed for 60 seconds, the search
mode is canceled.
ACCESSORIES
105
Also, if you press and hold ENTER for at least two Song search example:
seconds, all songs in the iPod/iPhone are played If there are 100 songs in your iPod/iPhone, they are
back.
divided into 6 groups using percentages (shown below).
• Depending on the iPod/iPhone, podcast search is not These groups are assigned to preset buttons 1 through 6.
supported.
Example 1:
• Press any of the preset buttons (1 through 6) during a Suppose the song you are searching for is located at
search to skip over a calculated percentage of songs. around the middle (50%) of your library: press button
For details, refer to “Direct Search Function”.
4 to jump to the 50th song and turn the Rotary Encoder
• During search mode, a search can be made quickly by to find the desired song.
Alphabet search function to find the desired artist or Example 2:
song, etc. For details, refer to “Alphabet Search
Suppose the song you are searching for is located near
Function”.
the end (83%) of your library: press button 6 to jump to
Direct Search Function
the 83rd song and turn the Rotary Encoder to find the
Direct search can be used to jump a fixed percentage of desired song.
titles within the current search category (album, song,
etc.).
In the search mode, press any one of the preset buttons
(1 through 6) to quickly skip over a designated percent
of your song content.
9
106 ACCESSORIES
Preset buttons
Songs
0%
1
17%
2
1st song
17th song
All 100 songs (100%)
33%
50%
3
4
33rd song
50th song
67%
5
83%
6
67th song
83rd song
Press Rewind
or
Forward to change to the previous or next Playlist/ Artist/Album/Genre/
• The Alphabet Search Function is only applicable to
Composer/Episode.
English alphabetic characters.
NOTE:
• While in Alphabet search mode, pressing t will return
• If the song search mode was used to select a song, this
to the previous mode.
function is inactive.
• If the PLAYLIST search mode is used to search for a
song, the Alphabet search function is inactive in the • If an album is selected during an artist search, other
albums by that artist are searchable.
song search hierarchy.
NOTE:
• This function is unavailable when GENIUS MIX is • This function is inactive during shuffle (M.I.X.)
playback.
selected.
Select Playlist/Artist/Album/Genre/ Composer/
Episode
Alphabet Search Function
Use the alphabet search function to search for an album,
Playlist/Artist/Album/Genre/Composer/Episode can song, etc., by its first letter. Select the first letter of the
be easily changed. For example, if you listen to a song desired title (album, song, etc.), and the titles beginning
from a selected album, the previous or next album can be with this letter are listed.
selected.
ACCESSORIES
107
1. During search mode, press BAND/ABC SEARCH to Search Position Memory
activate Alphabet Search function.
During iPod/iPhone playback, you can quickly return to
2. Turn the Rotary Encoder to select a desired letter the last-selected hierarchy level in the search mode.
/ENTER.
(e.g. M), and then press
.
Press
A list which begins with the selected initial letter is The hierarchy you selected last in the search mode is
searched.
displayed.
3. Turn the Rotary encoder to select the desired item NOTE: This function is unavailable when iPod MODE is
(which begins with initial letter “M”), and then press selected in “Setting the iPod Control” (refer to “Setting
/ENTER.
the iPod Control”).
NOTE:
Random Play Shuffle (M.I.X.)
• The Alphabet Search Function is only applicable to The Shuffle function of the iPod/iPhone is displayed as
English alphabetic characters.
M.I.X. on this unit.
will Shuffle Albums:
• While in Alphabet search mode, pressing
return to the previous mode.
The songs on each album are played back in proper order.
• If the Playlist search mode is used to search for a song, Upon completion of all the songs on the album, the next
the Alphabet search function is inactive in the song album is selected randomly. This continues until all
search hierarchy.
albums have been played.
• This function is unavailable when Genius Mix list is
selected.
9
108 ACCESSORIES
Shuffle Songs:
Shuffle All:
Song shuffle randomly plays back songs within a selected Shuffle All plays all songs in the iPod/iPhone randomly.
category (playlist, album, etc.). The songs within the Any one song does not play back again until all songs
category are played just once until all songs have been have been played back.
played.
1. Press
/ENTER to activate the search selection
.
mode.
1. Press
The songs are played back in random sequence.
MIX ALBUM → MIX SONG*2 → (off ) → MIX OFF →
MIX ALBUM
*1 Shuffle Albums.
*2 Shuffle Songs.
2. Turn the Rotary Encoder to select Shuffle All, and then
/ENTER.
press
To cancel M.I.X. play, press
to select OFF.
NOTE:
• If Shuffle All is selected, the selected songs being
played back in the search mode are canceled.
2. To cancel M.I.X. play, select (off) with the above
procedure.
• This function is unavailable when iPod MODE is
selected in “Setting the iPod Control” (refer to “Setting
NOTE:
the iPod Control”).
• If a song is selected in the album search mode before
selecting M.I.X. play, the songs will not play back Repeat Play
randomly even when Shuffle Albums is selected.
Only Repeat One is available for the iPod/iPhone.
ACCESSORIES
109
Repeat One:
NOTE:
A single song is repeatedly played back.
• When the Text Scroll is set to Manual (refer to “Scroll
Setting (Text Scroll)” on page 73), press and hold
VIEW for at least two seconds, the current text
will be scrolled one time.
1. Press
.
The song is played back repeatedly.
REPEAT ONE* → REPEAT OFF → REPEAT ONE
* Repeat One.
TRACK NO./ELAPSED TIME → ARTIST NAME*/
SONG TITLE* → ALBUM NAME*/SONG TITLE* →
TRACK NO./CLOCK → TRACK NO./ELAPSED TIME
2. To cancel repeat play, select (Repeat Off) with the
* TAG information “ARTIST”/“ALBUM”/“SONG” is
above procedure.
displayed if there is no tag information.
NOTE:
NOTE:
• Depending on the connected iPod, track up/down
• The maximum number of characters for the head unit
may be not available during Repeat play.
is 70 (70 byte).
Displaying The Text
• Some characters may not be correctly displayed.
You can display the tag information of a song in the
iPod/iPhone.
Press
VIEW.
Each press changes the display.
9
110 ACCESSORIES
PANDORA INTERNET RADIO — IF EQUIPPED
Just start with the name of one of your favorite artists,
songs or classical composers and Pandora will create a
“station” that plays their music and more music like it.
The unit enables you to interact with your Pandora
account by connecting a Smartphone that has the latest
version of the Pandora application installed.
NOTE:
• Some Pandora application functions are not available
when using this unit.
• Pandora is also controllable from an iPod touch with
Wi-Fi connection.
1
2
3
4
5
6
—
Source
Enter
—
— Rotary Encoder
—
Fast Forward
New Station
—
—
Bookmark
7—
8—
9—
10 —
11 —
Thumbs Up
Thumbs Down
View
Play/Pause
Return
• Pandora is available on iOS and Android OS with this
unit.
• Before this operation, set ALPINE APP to USB or BT
depending on the connected Smartphone. For details,
refer to “Application Setting (APP)”.
Listening To Pandora
Pandora internet radio is your own FREE personalized 1. Connect a Smartphone with the latest version of
radio now available to stream music on your Smartphone
Pandora installed.
(which runs Android OS or iOS).
/SOURCE to switch to the Pandora mode.
2. Press
ACCESSORIES
3. To pause playback, press
resume playback.
. Pressing
4. To skip to the next song, press
again will
.
NOTE:
111
“Thumbs” Feedback
You can personalize your stations with “Thumbs Up” or
“Thumbs Down” feedback, which the system takes into
account for future music selections.
or
for thumbs up or
During playback, press
• The operation to replay a previous song is not avail- thumbs down.
able.
: The
icon appears in the display. Pandora will
• Pandora limits the number of skips allowed on their add similar music to your station.
service. If you attempt to skip songs beyond the limit,
: The
icon is displayed. Pandora will ban that
“Skip Limit” is displayed.
song from your station, and the current song is
• The unit remembers the source just before turning off skipped. If the number of skips allowed has reached
the power. If Pandora is the last SOURCE to be played, its limit, the current song continues to play back.
it will appear as the SOURCE the next time the unit is
power up even if the app is not launched on your NOTE:
Smartphone.
• In some situations, “Thumbs” feedback may not be
available.
• Pandora audio could drop out in areas with poor
phone coverage.
• The display content varies when ads are received.
• The playback time may not be correctly displayed.
Searching For A Desired Station
You can display your station list and select stations
directly from this unit.
Alphabet Search:
1. Press
/ENTER to activate the Search mode.
9
112 ACCESSORIES
2. Turn the Rotary encoder to select “A-Z”, and then Search by Genre:
/ENTER.
press
1. Press
/ENTER to activate the Search mode.
The “A-Z” search mode is activated and the station
The “GENRE” search mode is activated and all the
names are listed alphabetically.
genre types are listed.
3. Turn the Rotary encoder to select the desired station,
2. Turn the Rotary encoder to select the desired genre
/ENTER.
and then press
/ENTER.
type, and then press
Pandora will play that station.
3. Turn the Rotary encoder to select the desired station,
Search by Date Added:
/ENTER.
and then press
/ENTER to activate the Search mode.
1. Press
Pandora will play that station.
2. Turn the Rotary encoder to select “By Date”, and then NOTE:
press
/ENTER.
• The shared station is marked with “H” in search list.
The “By Date” search mode is activated and the
The current station is marked with “K” in the search
station names are listed by the date they were added
list. And then if the current station is a shared station,
to the account.
the station will be marked with “J”.
3. Turn the Rotary encoder to select the desired station, • If any one of the preset buttons (1 through 6) is pressed
/ENTER.
and then press
in the search mode, a search can be made quickly by
skipping the specified number of channels. For details,
Pandora will play that station.
refer to “Direct Search Function” on page 105.
• When the desired station can’t be found, turn to
SHUFFLE mode to select station randomly.
ACCESSORIES
Shuffle
113
Bookmarking A Desired Song Or Artist
Use Shuffle to create a playlist based on two or more of The currently playing track or artist can be bookmarked
your Pandora stations. Edit your Shuffle station selec- and saved to your Pandora account.
tions on the Pandora Compatible Application for iPhone
(Bookmarks).
1. During playback, press
when it is not connected to this unit.
The Pandora Bookmark screen is displayed.
/ENTER to activate the Search mode.
1. Press
2. Turn the Rotary encoder to select “Track (Bookmark)”
2. Turn the Rotary encoder to select “A-Z” or “By Date”,
/ENTER.
or “Artist (Bookmark)”, and then press
/ENTER.
and then press
The current track or artist is bookmarked. “Bookmark
The “A-Z” or “By Date” search mode is activated and
Track” or “Bookmark Artist” is displayed.
the station name is displayed.
NOTE:
/ENTER while selecting “SHUFFLE”.
3. Press
• Your bookmarks can be viewed on your “Profile” page
NOTE:
at www.pandora.com.
• The songs from the created stations are played back in • In some situations, bookmarks may not be available.
random sequence.
• When Bookmark operation is failed, Bookmark N/A
• Select another station during search mode to cancel
will be displayed.
Shuffle.
Creating A New Station
• During search list mode, the Shuffle icon will be
displayed when the current station belongs to Based on currently playing track or artist, you can create
a new station and save to your Pandora account.
SHUFFLE.
(New Station).
1. During playback, press
The Pandora New Station screen is displayed.
9
114 ACCESSORIES
2. Turn the Rotary encoder to select “Track” or “Artist”, Changing The Display
/ENTER.
and then press
Press
VIEW.
A “New Track” or “New Artist” pop-up screen.
A New Station based on current track or artist is created.
NOTE:
• Your New Station can be viewed on your “Profile”
page at www.pandora.com.
• In some situations, creating a new station function
may not be available.
• If this operation fails, N/A will be displayed.
• When the Smartphone is not connected to this unit,
you can create personalized Pandora stations using the * TAG information If there is no text information, nothing
Pandora Application on your Smartphone. You can will be displayed.
also create stations on the web at www.pandora.com.
NOTE:
Search Position Memory
• Some characters may not be correctly displayed.
During playback, you can quickly return to the lastselected hierarchy level in the search mode.
Press
.
The hierarchy you selected last in the search mode is
displayed.
SIRIUSXM SATELLITE RADIO OPERATION — IF
EQUIPPED
CONTENTS
䡵 SIRIUSXM SATELLITE RADIO OPERATION — IF
EQUIPPED. . . . . . . . . . . . . . . . . . . . . . . . . . . .116
▫ Receiving Channels With The SiriusXM Tuner .117
▫ SiriusXM Setting . . . . . . . . . . . . . . . . . . . . . .117
▫ Managing Artist And Song Alerts . . . . . . . . . .118
▫ Setting The Favorite Sports Team Alerts . . . . . .119
▫ Setting The Parental Control . . . . . . . . . . . . . .119
▫ Confirming The Strength Of The SiriusXM
Signal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .121
▫ Setting TuneStart . . . . . . . . . . . . . . . . . . . . . .121
▫ Checking The SiriusXM Radio ID Number . . . .122
▫ Storing Channel Presets . . . . . . . . . . . . . . . . .122
▫ Tuning Channels Using Presets . . . . . . . . . . . .122
▫ SmartFavorites Function . . . . . . . . . . . . . . . . .123
▫ TuneScan Function. . . . . . . . . . . . . . . . . . . . .123
▫ TuneStart Function. . . . . . . . . . . . . . . . . . . . .124
▫ Storing The Desired Artist And Song Alerts . . .124
▫ Receiving And Tuning To An Alert . . . . . . . . .125
▫ Search Function . . . . . . . . . . . . . . . . . . . . . . .126
▫ Using Jump Memory And Jump Recall
Function . . . . . . . . . . . . . . . . . . . . . . . . . . . .128
▫ Replay Function . . . . . . . . . . . . . . . . . . . . . .128
▫ Parental Lock Function. . . . . . . . . . . . . . . . . .129
▫ iTunes Radio Tagging. . . . . . . . . . . . . . . . . . .130
▫ Changing The Display . . . . . . . . . . . . . . . . . .131
10
116 SIRIUSXM SATELLITE RADIO OPERATION — IF EQUIPPED
SIRIUSXM SATELLITE RADIO OPERATION — IF
EQUIPPED
SiriusXM Tuner operation:
WARNING!
Always drive safely with your hands on the steering
wheel and obey all applicable laws. You have full
responsibility and assume all risks related to the use
of the features and applications in this vehicle. Only
use the features and applications in this vehicle
when it is safe to do so. Failure to do so may result in
an accident involving in serious injury or death.
1—
Source
2 — Setup Button
Enter
3—
4 — Rotary Encoder
Fast Forward
5—
6 — Preset Buttons
(1 through 6)
7—
Forward
Rewind
8—
Tag
9—
Play/Pause
10 —
11 —
Return
12 — Band Button
When a SiriusXM Tuner is connected to this unit, the
following operations may be performed.
SIRIUSXM SATELLITE RADIO OPERATION — IF EQUIPPED 117
Receiving Channels With The SiriusXM Tuner
About SiriusXM Satellite Radio
Only SiriusXM brings you more of what you love to
listen to, all in one place. Get over 140 channels, including commercial-free music plus the best sports, news,
talk, comedy and entertainment. Welcome to the world of
satellite radio. A SiriusXM Vehicle Tuner and Subscription are required. For more information, visit
www.siriusxm.com .
Alternatively, you can enter the number of the desired
channel using the numeric keypad on an optional
remote control.
SiriusXM Setting
The following steps one to five are common to the
various SiriusXM functions. For details, refer to each
individual function.
1. Press and hold AUDIO/SETUP for at least two seconds to activate the SETUP mode.
To
activate
SiriusXM
Canada
service,
go
www.xmradio.ca and click on “ACTIVATE RADIO” in 2. Turn the Rotary encoder to select “SiriusXM”, and
/Enter.
then press
the top right corner, or call 877-438-9677.
The SiriusXM setup mode is activated.
NOTE:
3. Turn the Rotary encoder to select the desired items
• The SiriusXM Satellite Radio controls on this unit are
/Enter.
and then press
available only when a SiriusXM Tuner is connected.
SiriusXM:
/Source to activate the Satellite Radio
1. Press
Alert Setup ↔ Games Alert Setup ↔ Parental Lock ↔
(SiriusXM) mode.
Signal Indicator ↔ Alert Setup
2. Press
or
to select the desired channel.
4. Turn the Rotary encoder to change the settings.
Holding down
or
will rapidly browse through
5. Press and hold AUDIO/SETUP for at least two secthe channels.
onds.
The SETUP mode is canceled.
10
118 SIRIUSXM SATELLITE RADIO OPERATION — IF EQUIPPED
NOTE:
• Press
to return to the previous mode.
• If no operation is performed for 60 seconds, the unit
will return to normal mode automatically.
Managing Artist And Song Alerts
The following operations can be performed to change the
Alert settings. The Artist and Song Alerts feature allows
you to mark Artists and Songs from the current channel
and then the unit alerts you later when the marked
Artists or Songs are playing on other channels.
• Setting item: Alert Setup
Setting contents:
Alert List / Alert / A S Alert / Delete All
2. Turn the Rotary encoder and select a stored Artist or
/ ENTER.
Song and press
3. Turn the Rotary encoder to select either Alert to enable
(ON) or disable (OFF) the alert for the selected Artist/
Song or turn the Rotary Encoder to select Delete to
delete the selected Artist/Song from memory.
Alert
This menu option allows you to temporarily disable
the Artist/Song Alerts for all Artists/Songs. When the
Alerts are re-enabled, individual Artist/Song Alert
disabled in the Alert List menu setting remain disabled.
Turn the Rotary encoder to select ON or OFF, and then
/ENTER.
press
Alert List
If ON is set, the alert for all stored Artists/Songs is
enabled.
This menu option allows you to enable the Artist/Song
alert for individual Artist/Songs (ON or OFF) or to delete
individual stored Artist/Song alerts (Delete).
If OFF is set, the alert for all stored Artists/Songs is
disabled.
1. Turn the Rotary encoder to select Alert List, and then
/ ENTER.
press
A S Alert
This menu option allows you to enable the alerts of all
sources.
SIRIUSXM SATELLITE RADIO OPERATION — IF EQUIPPED 119
Turn the Rotary encoder to select ON or OFF, and then 2. Turn the Rotary encoder to select a team you want to
/ENTER.
/ENTER.
press
store and press
If ON is set, the alert of all source is enabled.
If OFF is set, only the alert of SiriusXM source is
enabled.
Delete All
“TEAM SAVED” and “XXU(sed)/YYE(mpty)” are displayed.
XX is the total number of Artist/Song/GameAlert
items stored in memory, and YY is the total number of
memory slots still available for storage.
This operation will delete all alerts (artists, songs and
NOTE:
team) stored in memory.
After selecting this item, turn the Rotary encoder to • Select “None” on the team list if you do not want to
store in memory.
/ENTER.
select YES, and then press
Setting The Favorite Sports Team Alerts
Setting The Parental Control
This menu option allows you to select your favorite
teams, organized by leagues, so that you will be alerted
later when your favorite teams are playing on other
channels.
You can lock out channels with passcode protection.
Channels that are locked cannot be accessed without
entering the pass code. You can unlock a channel or
change the pass code using this menu option.
• Setting item: GAME ALERT
• Setting item: P Lock
After selecting Games Alert Setup, a sports league list
will be displayed.
1. Turn the Rotary encoder to select the desired league,
/ENTER.
and then press
Setting contents:
Clear All / Locked CH/ Edit Code
10
120 SIRIUSXM SATELLITE RADIO OPERATION — IF EQUIPPED
How to input pass code?
Turn the Rotary encoder to select YES, and then press
/ ENTER.
1. After select Parental Lock, a pass code input screen
Locked CH:
will be displayed.
After selecting this item, turn the Rotary encoder to select
/ ENTER to select
a channel from channel list, press
The initial default four digit pass code is set to 0000.
to lock or unlock the channel. Locked channels cannot
The pass code is entered one digit at a time with the be tuned without entering the pass code.
Rotary encoder. For example, by turning clockwise
The locked channel will be displayed with “L” before
2 steps, the number 1 is selected.
channel No.
(asterAfter entering the digit, it is displayed as
Edit Code:
isk).
Change the pass code.
3. Press
, and then input the next digit of the pass
Input the old pass code as steps 1 to 4 in “How to input
code as described in step 2.
pass code?”.
Press
to delete the current entry return to the
After the old pass code is entered, the new pass code
previous step.
input screen will be displayed.
4. Repeat steps 2 to 3 until the 4 digits of the pass code
Input the new pass code as steps 1 to 4 in “How to input
/ ENTER.
are entered, and then press
pass code?”.
After the correct pass code is entered, the Clear
All/Locked Channels/Edit Code items can be ad- A confirm screen will be displayed and the new passcode
must be entered again for confirmation. When the passjusted.
code is changed successfully, the unit will display Code
Clear All:
Saved.
Unlock all locked channels.
2. Input the pass code using the Rotary encoder.
SIRIUSXM SATELLITE RADIO OPERATION — IF EQUIPPED 121
1. Press and hold AUDIO/SETUP for at least two sec- NOTE:
onds to activate the SETUP mode.
• If the Signal Indicator reports Weak or No Signal and
2. Turn the Rotary encoder to select “SiriusXM”, and
your vehicle is parked outside with no obstructions to
/ ENTER.
then press
the southern sky, then your SiriusXM antenna may not
be properly installed or may have become damaged.
The SiriusXM setup mode is activated.
3. Turn the Rotary encoder and select Parental Lock and Setting TuneStart
/ ENTER.
press
With the TuneStart feature turned ON, you will hear the
4. Turn the Rotary encoder to select either Clear All, Locked beginning of the song when you tune to one of your
Preset music channels from the current band of presets. It
/ ENTER.
Channels or Edit Code, and press
may take a minute or two for the feature to work after
NOTE:
power up or after changing preset bands.
• Keep a note of the numbers somewhere safe in case Setting item: TUNE START
you should forget it.
Setting contents:
Confirming The Strength Of The SiriusXM Signal
OFF / ON (Initial setting)
You can check the signal strength through this setting item.
OFF: When set to OFF, TuneStart mode is unavailable.
• Setting item: Signal IND
ON: When ON, selecting a SmartFavorites or Preset
Signal content
Channel will automatically start the currently song from
the beginning, depending on the channel content type.
Setting IND
Pressing BACK will return to live satellite radio.
Setting Indicator:
NOTE: Displayed only when SiriusXM Tuner-SXV200 or
This menu item displays the SiriusXM signal strength
later is connected.
as Strong, Good, Weak or No Signal.
10
122 SIRIUSXM SATELLITE RADIO OPERATION — IF EQUIPPED
2. Tune to the desired channel, and then press and hold
(for at least two seconds) one of the preset buttons
To subscribe to the SiriusXM Satellite Radio service, it is
(1 through 6) to store the channel.
necessary to locate and identify the Radio ID of your
The display then shows the stored Band and preset
SiriusXM Tuner. The Radio ID contains 8 characters and
number (for example, SiriusXM1-3 is shown when
can be found on the bottom of your SiriusXM Tuner or
preset 3 of BAND1 is selected).
can be displayed on when selecting Channel 0 by following the steps below:
3. Repeat the procedure to store up to 5 other channels
Checking The SiriusXM Radio ID Number
1. While in the Satellite Radio Mode, press
select channel “0”.
or
to
onto the same band.
NOTE:
The unit displays “RADIO ID” and ID number at the
• A total of 18 channels can be stored in the preset
same time.
memory, 6 Channels for each band (SiriusXM1,
NOTE:
SiriusXM2 and SiriusXM3).
• The Radio ID does not include the letters I, O, S or F. • If you store a new channel into a preset which already
2. To cancel the ID number display, select a channel other
than “0”.
has a channel assigned, the current channel will be
cleared and replaced with the new one.
Storing Channel Presets
Tuning Channels Using Presets
1. Press BAND to select the desired band you want to
store the preset in.
1. Press BAND to select the desired band of Presets you
wish to access.
There are 3 Satellite Radio Preset bands.
2. Press the preset buttons (1 through 6) that has your
desired Satellite Radio channel stored in memory.
Each press of BAND changes the band: SiriusXM1 →
SiriusXM2 → SiriusXM3 → SiriusXM1
SIRIUSXM SATELLITE RADIO OPERATION — IF EQUIPPED 123
can even skip back if you think you missed the preview
or if you are not interested in the current preview, skip
SmartFavorites allow you to rewind and replay any
forward.
missed programming from your current Band of Preset
channels. Miss a music, news, talk or sports segment? No 1. Press and hold ENTER/OPTION for at least two
Problem, because you can rewind and replay when you
seconds when you want to scan the preset music.
tune to one of your SmartFavorites channel and hear
The Option mode is activated.
what you missed. Note that buffering starts five seconds
after changing the band. It takes five seconds for Smart- 2. Turn the Rotary encoder to select TUNE SCAN, and
then press ENTER.
Favorites to start buffering the preset channels in the new
band. TuneScan and TuneStart functions are enabled by
The “ T.S.” indicator lights up during TuneScan mode.
the above-mentioned SmartFavorites functionality.
Press ENTER during scan playback, TuneScan mode
will be canceled and the selected track will be played
NOTE:
back normally, at the same time the “ T.S.” indicator
• Compatible with SXV200 or later tuner models.
disappears.
SmartFavorites Function
• SmartFavorites channels are the same as Preset channels on this Owner’s Manual.
TuneScan Function
Press BACK during scan playback to cancel TuneScan
mode. The tuner returns to the channel before TuneScan was initiated and “SCAN STOP” will be displayed.
If you’ve got more than one Favorites music channel,
you’ve got a lot of choices every time you tune in. Instead NOTE:
of pushing every preset button and hearing the live song, • Compatible with SXV200 or later tuner models. Tunyou can simply use the TuneScan function to get a short
eScan channels are comprised of SmartFavorites Chanpreview of songs that you have missed on each of your
nels and may take a few minutes after power On or
SmartFavorites music channels. Find a song you like and
Preset Band change to operate.
press ENTER again to continue listening to that song. You
10
124 SIRIUSXM SATELLITE RADIO OPERATION — IF EQUIPPED
• If you use this function after changing the band within Storing The Desired Artist And Song Alerts
five seconds, “SCAN UNAVL” will be displayed.
While listening to SiriusXM Satellite Radio, you can be
• If no operation is performed during the scanning alerted when your favorite songs or artists are playing on
process, when scanning finishes, the next mode de- other channels. An interruption Alert will be displayed
when a matching artist or song is found on another
pends on the SiriusXM Tuner.
channel. For receiving interruption Alert information,
• The SiriusXM Tuner scans through the songs from the refer to “Receiving and Tuning to an Alert” on page 125.
SmartFavorites channels on the current band only,
/ENTER/OPTION for at least
1. Press and hold
scanning from oldest to newest.
two seconds when a Song or the song of an Artist
TuneStart Function
you want to store is playing.
With the TuneStart feature turned ON, you will hear the
The Option mode is activated.
beginning of the song when you tune to one of your
SmartFavorites channels. It may take a minute or two for 2. Turn the Rotary encoder to select Alert Memory, and
/ENTER.
then press
the feature to work after power up or after changing
preset bands. Information for turning TUNE START ON 3. Turn the Rotary encoder to choose Save Artist? or Save
or OFF can be found in the SiriusXM Setting section.
Song? (when available), and then press
/ENTER.
NOTE:
NOTE:
• If both the artist name and song title are not available
• Preset stations that play other than music-type content
to save, Artist/Song will be displayed.
will start playing the channel from the current live
play point when selected.
4. The new alert was stored in memory.
• Compatible with SXV200 or later tuner models.
An “Artist/Song Saved” pop-up screen is followed by
an “X U(sed)/Y E(mpty)”.
SIRIUSXM SATELLITE RADIO OPERATION — IF EQUIPPED 125
X is the total number of song titles or artist names 1. Turn the Rotary encoder to select the desired game,
artist or song from the list of active alerts.
stored in memory, and Y is the total number of
memory locations still available for storage.
2. Press
/ENTER.
NOTE:
NOTE:
• If you try to store when the memory is full, “Memory
• If no operation is performed for five seconds, the unit
Full” is displayed followed by “Replace/Cancel”. If
returns to normal mode.
you want to replace an existing alert item, select
“Replace” by turning Rotary encoder, and then press • Sports teams/Artist name and Song title which you
/ENTER, the existing alert list stored in memory
have stored and which are currently playing will be
is displayed. Select one of the stored alerts using the
displayed in a category called “My Music”/“My
Rotary encoder. To replace the selected alert, press
Games” in search mode. For details, refer to “Search
/ENTER and an “Artist/Song Saved” pop-up
Function” on page 126.
screen is followed by an “X U(sed)/Y E(mpty)”.
• When an artist or song alert occurs, you may press
• You can manage the stored Alert memory setting on
to change the information as below.
Setup mode, for details, refer to “Managing Artist and
Artist name*/Song name* → Channel number/
Song Alerts” on page 118.
Channel name → Artist name/Song name
• If no operation is performed for 60 seconds, the setting
* Depending on the alert type, the display order for
mode is canceled.
Artist name or Song name will be reversed.
Receiving And Tuning To An Alert
to
• When a GameAlert occurs, you may press
Whenever a stored sports team, artist, or song is playing
change the information as below.
on another channel, an interruption Alert appears on the
Team name/League name → Channel number/
unit display. To tune to the game, artist or song identified
Channel name → Team name/League name
by the alert, follow the steps below:
10
126 SIRIUSXM SATELLITE RADIO OPERATION — IF EQUIPPED
Searching By Category
Search Function
You can search for SiriusXM programming content by 1. Enter SEARCH mode by pressing
Category or by Channel.
in the SiriusXM mode.
/ENTER while
Searching by Channel
2. Turn the Rotary encoder to select the desired Category,
/ENTER.
and then press
1. Turn the Rotary encoder to select All Channels after
/ ENTER.
step 1, and then press
3. Turn the Rotary encoder to select the desired Channel
Name, and then press
/ENTER.
All Channels will be displayed in a list.
2. Turn the Rotary encoder to select the desired channel, NOTE: During Category search, pressing the arrow
buttons to select another Category.
/ ENTER to confirm.
and then press
Searching by My Music
NOTE:
VIEW, the information of the broadcasting 1. Turn the Rotary encoder to select My Music* after step
• Press
/ ENTER.
1, and then press
channels will be displayed. You can choose the
desired channel from the artist name list or song
The artist names and song names that you have stored
name list.
and are currently playing will be displayed in a list.
Each time you press
below.
VIEW, the display changes as
* Displayed only when the stored song or artist is
broadcasting.
Channel number/Channel name → Channel number/ 2. Turn the Rotary encoder to select the desired artist/
Artist name → Channel number/Song name → Chan/ ENTER to confirm.
song, and then press
nel number/Channel name
The channel of the selected artist/song being broadcast is received.
SIRIUSXM SATELLITE RADIO OPERATION — IF EQUIPPED 127
NOTE:
NOTE:
VIEW, the information of the broadcasting • Press
, the information of the broadcasting chan• Press
channels will be displayed. You can choose the
nels will be displayed.
desired channel from the artist name list or song
• Each time you press
, the display changes as
VIEW, the display
name list. Each time you press
below. Team name/League name → channel
changes as below. Artist name*/Song name* →
number/channel name → Content Info → Team
Channel number/Channel name → Content Info →
name/League name
Artist name/Song name.
Searching By Featured Favorites
* Depending on the alert type, the display order for
Featured Favorites are groups of channels that are creArtist name or Song name will be reversed.
ated by the SiriusXM Programming department allowing
Searching By My Games
you to discover new channels. Featured Favorites chan1. Turn the Rotary encoder to select My Games* after nels are dynamic and can change often, allowing you to
discover new channels.
/ ENTER.
step 1, and then press
The sport teams that you have stored and the game is 1. Enter Search mode and turn the Rotary encoder to
currently broadcasting will be displayed in a list.
/ENTER.
select FEATURED*. Press
* Displayed only when the game of stored team is
broadcasting.
2. Turn the Rotary encoder to select the desired team,
/ ENTER to confirm.
and then press
The Banks that SXM recommends will be displayed in
a list, and the recommended Banks will be displayed
with an “l” before the Bank name.
* Only displayed when connected with SiriusXM
Tuner-SXV200 or later.
The channel of the selected game being broadcast is
received.
2. Turn the Rotary encoder to select the desired Bank,
/ENTER.
and then press
10
128 SIRIUSXM SATELLITE RADIO OPERATION — IF EQUIPPED
3. Turn the Rotary encoder to select the desired channel, 3. Press and hold BAND for at least two seconds to
recall, and then tune to the saved Jump Source chan/ENTER to confirm.
and then press
nel.
NOTE:
NOTE:
, the information of the selected channels
• Press
will be displayed. You can choose the desired chan- • Pressing and holding BAND again for at least two
seconds will jump back to the previous mode or
nel from the artist name list or song name list.
SiriusXM channel.
Each time you press
, the display changes as
below. Channel Number → Channel Name → Artist • During saved Jump Source channel playing, search
function, channel up/down, etc. are not available.
Name → Song Name → Content Info → Channel
Number
Replay Function
• When the selected Featured Favorites station is not
In SiriusXM mode, you can pause, rewind and replay of
broadcasting, the channel will tune to channel
live SiriusXM Satellite Radio.
000 automatically.
to
1. While listening to a SiriusXM channel, press
• Press BACK to return to the previous mode.
enter the Replay mode, which mutes the audio.
• If no operation is performed for 60 seconds, the unit
The display will show “
” while in this mode.
will return to normal mode automatically.
2. Press
again to resume playback of the stored
Using Jump Memory And Jump Recall Function
audio from the point at which it was paused.
1. While in SiriusXM mode, select your favorite
During playback, the SiriusXM Tuner will continue to
SiriusXM Channel.
store the channel audio until you exit the Replay
mode.
for at least two seconds.
2. Press and hold
The channel you selected is stored as the Jump Source.
SIRIUSXM SATELLITE RADIO OPERATION — IF EQUIPPED 129
During REPLAY playback:
Parental Lock Function
• Fast rewind:
This function can help restrict the listening of channels to
children of appropriate age levels only. For information
.
Press and hold
on setting the Parental Control passcode, refer to “Setting
• Fast forward:
the Parental Control” on page 119. When a locked
.
Press and hold
channel is selected, a “Channel Locked” pop-up screen is
• Returning to the beginning of the current song:
displayed.
.
Press
• Advancing to the beginning of the next song: Input the four digit passcode you set in, and then press
/ENTER, refer to “Setting the Parental Control” on
Press
.
page 119.
3. Press
to cancel the REPLAY mode.
Turn the Rotary encoder to select the number from 0-9,
The unit returns to live SiriusXM radio mode.
or
to adjust the digit. The initial
and then use
number
is
0000.
NOTE:
, the information of the replaying channels NOTE:
• Press
will be displayed. You can choose the desired channel from the artist name list or song name list.
• If you input a wrong passcode, “Wrong Code” is
displayed.
Each time you press
, the displayed changes as • After entering the correct passcode, you can access all
below. Band/Channel Number/IR Time → Band/
locked channels without entering the passcode again
Channel Number/Channel Name → Artist Name*/
until the unit is powered off and then back on.
Song Title* → Content info */Category Name* →
Clock → Band/Channel Number/IR Time.
* If there is no text information, nothing will be displayed.
10
130 SIRIUSXM SATELLITE RADIO OPERATION — IF EQUIPPED
• When the memory of iPod/iPhone is full, “iPod Full”
and “Tag Count X” are displayed. The tag information
iTunes Tagging lets you tag songs heard on SiriusXM
will be stored to the unit.
channels. Use this unit in conjunction with an optional
SiriusXM Tuner and a Tagging compatible iPod/iPhone • If the operation is failed, “Cannot Tag” is displayed.
to tag the music that you listen to. This tag information is
• This unit can store up to 50 tagged songs. When the
automatically transferred to your iPod/iPhone. Later,
memory of the unit is full, “Tag Count50” and
when your iPod/iPhone is connected to iTunes, you can
“Memory Full” are displayed.
preview, buy and download your tagged songs. For
details, refer to the Owner’s Manual of the Tagging • When an iPod that doesn’t support the tagging funccompatible iPod/iPhone.
tion is connected, “Non-Tagging iPod” is displayed.
iTunes Radio Tagging
The Tag indicator will light when a song playing on a • When the iPod/iPhone is disconnected from the unit
SiriusXM channel has tag information available.
during tagging, its tag information will be stored in the
unit.
VIEW for at least two seconds to
Press and hold
save its tag information.
• If there is stored tag information on the unit, when an
iPod/iPhone supporting the tag function is connected,
the stored tag information will be transferred to the
If no iPod/iPhone is connected, “Tag Count X” is disiPod/iPhone automatically. When the iPod/iPhone
played (X is the total amount of the tag information
memory becomes full, “iPod Full” will be displayed,
stored in this unit).
and any remaining tag information on the unit will not
be transferred to the iPod/iPhone.
NOTE:
During tagging, the TAG indicator blinks.
• During tagging, the iPod/iPhone takes priority to save • If tag information already exists, “Already Tagged”
will be displayed when you try to tag information
the tag information. If no iPod/iPhone is connected,
again.
the tag information is saved to this unit.
SIRIUSXM SATELLITE RADIO OPERATION — IF EQUIPPED 131
Changing The Display
Text information, such as the channel name, artist name/
feature and song/program title, is available with each
SiriusXM channel. The unit can display this text information as explained below.
In SiriusXM mode, press
VIEW.
Each time you press this button, the display changes as
shown below.
Band/Channel Number/Channel Name* → Artist
Name*/Song Title* → Content info.*/Category Name* →
Clock → Band/Channel Number/Channel Name
* If there is no text information, nothing will be displayed.
10
ADDITIONAL INFORMATION
CONTENTS
䡵 IN CASE OF DIFFICULTY. . . . . . . . . . . . . . . . .134
▫ Flash Memory Messages. . . . . . . . . . . . . . . . .137
▫ Basic. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .134
▫ iPod Messages. . . . . . . . . . . . . . . . . . . . . . . .138
▫ Radio . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .134
▫ Bluetooth Mode. . . . . . . . . . . . . . . . . . . . . . .139
▫ CD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .135
▫ SiriusXM Advisory Messages . . . . . . . . . . . . .139
▫ MP3/WMA. . . . . . . . . . . . . . . . . . . . . . . . . .136
▫ Pandora Mode Messages . . . . . . . . . . . . . . . .141
▫ Audio. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .136
▫ Specifications . . . . . . . . . . . . . . . . . . . . . . . .143
▫ iPod . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .136
▫ About The Rules Of Bluetooth Electromagnetic
Radiation Regulation . . . . . . . . . . . . . . . . . . .145
▫ CD Player Messages. . . . . . . . . . . . . . . . . . . .136
11
134 ADDITIONAL INFORMATION
IN CASE OF DIFFICULTY
– Press the RESET switch with a ballpoint pen or
other pointed article. For details, refer to “Initial
System Start-Up”.
If you encounter a problem, turn the power off, then on
again. If the unit is still not functioning normally, review
the items in the following checklist. This guide will help Radio
you isolate the problem if the unit is at fault. Otherwise,
Unable to receive stations.
make sure the rest of your system is properly connected
• No antenna or open connection in cable.
or consult an authorized dealer.
– Make sure the antenna is properly connected; reBasic
place the antenna or cable if necessary.
No Function or Display.
Unable to tune stations in the seek mode.
• Vehicle’s ignition is off.
• You are in a weak signal area.
– If connected following instructions, the unit will not
– Make sure the tuner is in the DX mode.
operate with the vehicle’s ignition off.
• Improper power lead (Red) and battery lead (Yellow) • If the area you are in is a primary signal area, the
antenna may not be grounded and connected properly.
connections.
– Check your antenna connections; make sure the
– Check power lead and battery lead connections.
antenna is properly grounded at its mounting
• Blown fuse.
location.
– Check the fuse of the unit; replace with the proper
• The antenna may not be the proper length.
value if necessary.
– Make sure the antenna is fully extended; if broken,
• Internal micro-computer malfunctioned due to interreplace the antenna with a new one.
ference noise etc.
ADDITIONAL INFORMATION 135
Broadcast in noisy.
• The antenna is not the proper length.
– Extend the antenna fully; replace it if it is broken.
• The CD is being improperly inserted.
– Make sure the CD is being inserted following instructions in the CD Player Operation section.
Unable to fast forward or backward the CD.
• The antenna is poorly grounded.
– Make sure the antenna is grounded properly at its • The CD has been damaged.
– Eject the CD and discard it; using a damaged CD in
mounting location.
your unit can cause damage to the mechanism.
CD
CD playback sound skips due to vibration.
CD Player not functioning.
• Improper mounting of the unit.
• Out of operating temperature range +50°C (+120°F) for
– Securely re-mount the unit.
CD.
– Allow the vehicle’s interior (or trunk) temperature • The disc is very dirty.
to cool.
– Clean the disc.
CD playback sound is wavering.
• The disc has scratches.
– Change the disc.
• Moisture condensation in the CD Module.
– Allow enough time for the condensation to evapo- • The pick-up lens is dirty.
rate (about 1 hour).
– Do not use a commercially available lens cleaner
disc. Consult your nearest authorized dealer.
CD insertion not possible.
• A CD is already in the CD player.
– Eject the CD and remove it.
CD playback sound skips without vibration.
• The disc is dirty or scratched.
– Clean the disc; damaged disc should be replaced.
11
136 ADDITIONAL INFORMATION
Error displays (built-in CD player only).
iPod
iPod does not play and no sound is output.
• Mechanical error.
. After the error indication disappears, • The iPod has not been recognized.
– Press
insert the disc again. If the above-mentioned
– Reset this unit and the iPod. Refer to “Initial System
solution does not solve the problem, consult your
Start-Up” on page 18. To reset the iPod, refer to the
nearest authorized dealer.
Owner’s Manual of the iPod.
CD-R/CD-RW playback not possible.
CD Player Messages
• Close session (finalization) has not been performed.
No Disc
– Perform finalization and attempt playback again.
• No CD is inserted.
MP3/WMA
– Insert a CD.
MP3 or WMA is not played back.
• Although a disc is inserted, “No Disc” is displayed
• Writing error occurred. The MP3/WMA format is not
and the unit does not start to play or eject the disc.
compatible.
– Remove the disc by following these steps:
– Make sure the MP3/WMA has been written in a
button again for at least two seconds.
Press the
supported format. Refer to “About MP3/WMA” on
If the disc still does not eject, consult an authorized dealer.
page 32, then rewrite in the format supported by
Error
this device.
• Mechanism error.
Audio
The sound is not output from the speakers.
• There is no signal output from the internal amplifier.
– Power IC is switched to “ON”.
1. Press the
button and eject the CD.
If not ejecting, consult an authorized dealer.
ADDITIONAL INFORMATION 137
2. When the error indication remains after ejecting, press • Text information that is not recognizable by the unit is
being used.
button again.
the
• Change the text information to text that is supported
If the error indication still does not turn off after
by the unit.
button for a few times, consult your
pressing the
authorized dealer.
Flash Memory Messages
• When “Error” is displayed:
Error
, press the • Communication error or other error.
If the disc cannot be ejected by pressing
RESET switch (refer to “Initial System Start-Up” on
– You can solve the problem by switching the source,
again. If the disc still cannot be
page 18) and press
turning ACC off/on, or turning power off/on.
ejected, consult your authorized dealer.
Error-01
Protect
• Communication error.
• A copy-protected WMA file was played back.
– You can solve the problem by switching the source,
– You can only play back non-copy-protected files.
turning ACC off/on, or turning power off/on.
Unsupported
Error-04
• A sampling rate/bit rate not supported by the unit is
• Abnormal current is run to the USB Flash Memory
used.
device.
– Use a sampling rate/bit rate that is supported by the
– You can solve the problem by turning ACC off/on,
unit.
or turning power off/on.
No Support
• An AAC format disc is inserted.
– Change to a disc of a supported format.
11
138 ADDITIONAL INFORMATION
No USB Device
– Change the text information to text that is supported by the unit.
• A Flash Memory is not connected.
– Make sure the Flash Memory device is correctly Device Error
connected.
• An unsupported USB device is connected.
No File
– Change other Flash Memory.
• No song (file) is stored in the Flash Memory.
iPod Messages
– Connect the Flash Memory device after storing No Song
songs (files).
• There are no songs in the iPod/iPhone.
Unsupported
– Download songs to the iPod/iPhone and connect to
• A sampling rate/bit rate not supported by the unit is
this unit.
used.
Error-01
– Use a sampling rate/bit rate that is supported by the
• Communication error or boot error, etc.
unit.
– You can solve the problem by reconnecting the
Protect
iPod/iPhone or changing source.
• A copy-protected WMA file was played back.
Error-02
– You can only play back non-copy-protected files.
• The iPod/iPhone version is too low.
No Support
– Update the iPod/iPhone version.
• Text information that is not recognizable by the unit is
being used.
ADDITIONAL INFORMATION 139
Error-03
Bluetooth Mode
• The iPod/iPhone is not verified.
No Unit
– You can solve the problem by reconnecting the • The BLUETOOTH device is not connected.
iPod/iPhone.
– Connect the BLUETOOTH device.
Error-04
SiriusXM Advisory Messages
• Abnormal current is run to the iPod/iPhone.
The following messages may be displayed while operat– You can solve the problem by reconnecting the ing the unit in SiriusXM mode.
iPod/iPhone, turning ACC off/on, or turning
CHK Tuner
power off/on.
• The radio is having difficulty communicating with the
No USB Device
SiriusXM Connect Vehicle Tuner. The tuner may be
• The iPod/iPhone is not connected.
disconnected or damaged.
– Make sure the iPod/iPhone is correctly connected
– Verify that the SiriusXM Connect Vehicle Tuner
and the cable is not bent excessively.
cable is securely connected to the radio.
Updating
CHK Antenna
• The search mode is activated during song download- • The radio has detected a fault with the SiriusXM
ing.
antenna. The antenna cable may be either discon– No necessary operation.
nected or damaged.
– Verify that the antenna cable is connected to the
SiriusXM Connect Vehicle Tuner.
– Inspect the antenna cable for damage and kinks.
Replace the antenna if the cable is damaged.
11
140 ADDITIONAL INFORMATION
No Signal
• The SiriusXM Connect Vehicle Tuner is having difficulty receiving the SiriusXM satellite signal.
– Verify that your vehicle is outdoors with a clear
view of the sky.
– Verify that the SiriusXM magnetic mount antenna is
mounted on a metal surface on the outside the
vehicle.
– Move the SiriusXM antenna away from any obstructions.
– Inspect the antenna cable for damage and kinks.
866-635-2349 if you have questions about your subscription package or would like to subscribe to this
channel.
CH UNAVAIL
• The channel that you have requested is not a valid
SiriusXM channel or the channel that you were listening to is no longer available.
NOTE:
• The unit will revert to the previous channel or to
channel 1 automatically.
– U.S. residents visit: www.siriusxm.com, Canadian
CH UNSUB
residents visit: www.siriusxm/guardian/ca for
• The channel that you have requested is not included in
more information about the SiriusXM channel
your SiriusXM subscription package or the channel
lineup.
that you were listening to is no longer included in your
SUBSCRIP Updated → Any Key To Continue
SiriusXM subscription package.
• The radio has detected a change in your SiriusXM
NOTE:
subscription status.
• The unit will revert to the previous selected channel or
– Press any button to clear this message.
to channel 1 automatically.
– U.S. residents visit: www.siriusxm.com, Canadian
residents visit: www.siriusxm/guardian/ca or call
ADDITIONAL INFORMATION 141
CH Locked → Lock Code?
Pandora Mode Messages
• When a locked channel is selected, “CH LOCKED” is No Pandora
displayed, then press ENTER or turn Rotary encoder,
• You have not created any personalized Pandora Sta“LOCK CODE?” will be displayed.
tions.
The channel that you have requested is locked by the
– When you are not driving, use the Pandora Comradio Parental Control feature.
patible Application on the Smartphone to create
your Pandora station(s).
– See “Setting the Parental Control” for more information on the Parental Control feature and how to
Create A Station
access locked channels.
• You have not created any personalized Pandora StaNOTE:
tions.
• If wrong passcode is input, “CODE ERROR” will be
– When you are not driving, use the Pandora Comdisplayed and the unit will revert to the previous
patible Application on the Smartphone to create
selected channel.
your Pandora station(s).
Memory
Pandora APP Error
• Buffer for Replay will full within 11 seconds.
• The music cannot be played because the Pandora
Compatible Application on the Smartphone requires
the user’s attention.
– When you are not driving, please see the Pandora
Compatible Application on the Smartphone.
MEM Full
• Buffer for Replay is full.
11
142 ADDITIONAL INFORMATION
No Service
Update____PandoraAPP
• You switched CDE-HD149BT to Pandora mode by • You switch CDE-W265BT/CDE-164BT to Pandora
pressing
mode by pressing SOURCE with a Smartphone con/SOURCE with a Smartphone connected, with an old version Pandora Compatible Apnected, without launching or installing the Pandora
plication.
Application.
– Launch the Pandora Application on the Smart– Update the Pandora Compatible Application on the
phone.
Smartphone.
– Select a source other than Pandora by pressing
– Select a source other than Pandora by pressing
/SOURCE.
SOURCE.
Login To_______Pandora
Limited_____Connection
• The user didn’t log in Pandora account of the Smart- • A Smartphone in the airplane mode is connected the
phone side.
unit, so that the Pandora application has limited
connectivity and is unable to be active.
– Log in the Pandora account.
– Make sure the Smartphone is in a mode other than
Station____List_Full
the airplane mode.
• The number of new stations reached the limit (100 sta– Wait for the Pandora application to auto-recover
tions).
and resume playback.
– Delete an existing station.
No_Service_Available
• Attempt to launch the Pandora application on the
Smartphone from restriction region.
– Move the vehicle to a location with the Pandora
license.
ADDITIONAL INFORMATION 143
Station________N/A
CD PLAYER SECTION
• The searched station is no longer available on Pandora
servers.
– Select another station to play.
Specifications
FM TUNER SECTION
Tuning Range
Mono Usable Sensitivity
50 dB Quieting Sensitivity
Alternate Channel Selectivity
Signal-to-Noise Ratio
Stereo Separation
Capture Ratio
87.7~107.9 MHz
9.3 dBf (0.8 µV/75 ohms)
13.5 dBf (1.3 µV/75 ohms)
80 dB
65 dB
35 dB
2.0 dB
AM TUNER SECTION
Tuning Range
Sensitivity (IEC Standard)
530~1,710 kHz
22.5 µV/27 dB
Frequency Response
Wow & Flutter (% WRMS)
Total Harmonic Distortion
Dynamic Range
Signal-to-Noise Ratio
Channel Separation
5~20,000 Hz (±1 dB)
Below measurable limits
0.008% (at 1 kHz)
95 dB (at 1 kHz)
105 dB
85 dB (at 1 kHz)
PICKUP
Wave length
Laser power
795 nm
CLASS I
USB SECTION
USB requirements
Max. Power Consumption
USB Class
File System
MP3 Decoding
WMA Decoding
AAC Decoding
USB 1.1/2.0
Smartphone charge-capable
Mass Storage
FAT 12/16/32
MPEG AUDIO Layer-3
Windows Media Audio
AAC-LC format “.m4a” file
11
144 ADDITIONAL INFORMATION
BLUETOOTH SECTION
BLUETOOTH
Specification
Output Power
Profile
Bluetooth V2.1 + EDR
+4 dBm Max.
(Power class 2)
HFP (Hands-Free Profile)
HSP (Head Set Profile)
A2DP (Advanced Audio
Distribution Profile)
AVRCP (Audio/Video Remote Control Profile)
GENERAL
Power Requirement
Power Output
Maximum Pre-Output
Voltage
Bass
Treble
Loudness
Weight
4V/10k ohms
±9.1 dB at 100 Hz
±9.1 dB at 10 kHz
10 dB at 100 Hz
1.5 kg (3 lbs. 5 oz)
CHASSIS SIZE
Width
Height
Depth
178 mm (7⬙)
50 mm (2⬙)
161.5 mm (6–3/8⬙)
NOSEPIECE SIZE
14.4 V DC (11~16 V allowable)
18 W RMS × 4*
* Primary amplifier ratings per CEA-2006 Standard
Width
Height
Depth
168 mm (6–5/8⬙)
45 mm (1–3/4⬙)
24 mm (1⬙)
NOTE: Due to continuous product improvement, speci• Power output: measured at 4 Ohms and ≤ 1% THD+N fications and design are subject to change without notice.
• S/N: 80 dBA (reference: 1 W into 4 Ohms)
ADDITIONAL INFORMATION 145
About The Rules Of Bluetooth Electromagnetic Radiation Regulation
USA/Canada
FCC CAUTION
Changes or modifications not expressly approved by the
party responsible for compliance could void the user’s
authority to operate the equipment.
This device complies with Part 15 of FCC Rules and
Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this
device may not cause interference, and (2) this device
must accept any interference, including interference that
may cause undesired operation of this device.
Le présent appareil est conforme aux la partie 15 des
règles de la FCC et CNR d’Industrie Canada applicables
aux appareils radio exempts de licence. L’exploitation
est autorisée aux deux conditions suivantes : (1)
l’appareil ne doit pas produire de brouillage, et (2)
l’utilisateur de l’appareil doit accepter tout brouillage
radioélectrique subi, même si le brouillage est susceptible d’en compromettre le fonctionnement.
11
146 ADDITIONAL INFORMATION
USA/Canada
This equipment complies with FCC/IC radiation exposure limits set forth for an uncontrolled environment
and meets the FCC radio frequency (RF) Exposure
Guidelines in Supplement C to OET65 and RSS-102 of
the IC radio frequency (RF) Exposure rules. This equipment has very low levels of RF energy that it deemed to
comply without maximum permissive exposure evaluation (MPE). But it is desirable that it should be installed
and operated keeping the radiator at least 20cm or more
away from person’s body (excluding extremities: hands,
wrists, feet and ankles).
USA/Canada
Cet équipement est conforme aux limites d’exposition
aux rayonnements énoncées pour un environnement
non contrôlé et respecte les règles les radioélectriques
(RF) de la FCC lignes directrices d’exposition dans le
Supplément C à OET65 et d’exposition aux fréquences
radioélectriques (RF) CNR-102 de l’IC. Cet équipement
émet une énergie RF très faible qui est considérée
conforme sans évaluation de l’exposition maximale autorisée. Cependant, cet équipement doit être installé et
utilisé en gardant une distance de 20 cm ou plus entre le
dispositif rayonnant et le corps (à l’exception des extrémités : mains, poignets, pieds et chevilles).
ADDITIONAL INFORMATION 147
México
La operación de este equipo está sujeta a las siguientes
dos condiciones: (1) es posible que este equipo o dispositivo no cause interferencia perjudicial y (2) este
equipo o dispositivo debe aceptar cualquier interferencia, incluyendo la que pueda causar su operación no
deseada.
11
© 2017 FCA US LLC. All Rights Reserved.
ALFA ROMEO is a registered trademark of
FCA Group Marketing S.p.A., used with permission.
18ALFA-526-AA • First Edition
Printed in U.S.A.
Download PDF
Similar pages