LX1000
USER MANUAL
020-000141-01
= Lens not included.
User Manual
LX1000 User Manual
020-000141-01 Rev. 1 (05-2009)
1
Features and Design
This Multimedia Projector is designed with most advanced technology for portability, durability, and ease of use. This
projector utilizes built-in multimedia features, a palette of 1.07 billion colors, and matrix liquid crystal display (LCD)
technology.
U
Functionally Rich
U
Operation menu is available in 12 languages;
English, German, French, It alian, Spanish,
Portuguese, Dutch, Swedish, Russian, Chinese,
Korean, and Japanese (p.48).
This projector has many useful functions such
as lens shifting, ceiling and rear projection,
perpendicular omnidirectional projection, variety of
lens options, etc.
U
Simple Computer System Setting
U
Useful Functions for Presentation
Digital zoom function allows you to focus on the
crucial information during a presentation (pp.29,
40).
U
Lamp Control
Brightness of the projection lamp can be selected
(p.51).
U
U
Power Management
This projector applies various input/output
terminals and 2 terminal slots for expansion to tune
to diversity of signals from computers and video
equipment (p.19). For optional interface boards,
contact sales dealer where you purchased the
projector.
U
Filter Replacement Function
U
Helpful Maintenance Functions
Lamp and filter maintenance functions provide for
better and proper maintenance of the projector.
Shutter Function
The projector is equipped with the shutter that
provides complete blackness for a while the
projected image is not needed with keeping the
projector on. The Shutter management function
allows you to set the timer. It prevents leaving
the projector on with the shutter closed for a long
time. (p.55)
The projector monitors the condition of the filter
and replaces a filter automatically when it detects
the clogging.
U
Multi Versatile Platform
U
The Power management function reduces power
consumption and maintains lamp life (p.52).
U Automatic
Motor-driven Lens Shift
Projection lens can be moved up, down, right and
left with the motor-driven lens shift function. This
function makes it easy to provide projected image
where you want. Zoom and focus can also be
adjusted with a motor-driven operation. (p.27)
*Zoom and focus functions may not operate
depending on the optional lens.
Security Function
The Security function helps you to ensure security
of the projector. With the Key lock function, you can
lock the operation on the side control or remote
control (p.53). PIN code lock functions prevents
unauthorized use of the projector (pp.53–54).
U
Logo Function
The Logo function allows you to customize the
screen logo (pp.49–50). You can capture an image
for the screen logo and use it for the starting-up
display or between presentations.
The projector has the Multi-scan system to
conform to almost all computer output signals
quickly (p.34). Supported resolution up to WUXGA.
U
Multilanguage Menu Display
Network board (Optional)
Network board is an optional product to control
and set up the projector via the network cables
with the web browser on your computer. It can
be controlled and set up the projector remotely.
Contact the sales dealer where you purchased this
projector for optional parts.
Note:
s4HE/N3CREEN-ENUANDFIGURESINTHISMANUALMAYDIFFERSLIGHTLYFROMTHEPRODUCT
s4HECONTENTSOFTHISMANUALARESUBJECTTOCHANGEWITHOUTNOTICE
2
LX1000 User Manual
020-000141-01 Rev. 1 (05-2009)
Table of Contents
Features and Design. . . . . . . . . . . . . . . .
Table of Contents . . . . . . . . . . . . . . . . . .
To The Owner . . . . . . . . . . . . . . . . . . . . .
Safety Instructions . . . . . . . . . . . . . . . . .
2
3
4
5
Air Circulation
6
Installing the Projector in Proper Directions
7
Moving the Projector
8
Compliance . . . . . . . . . . . . . . . . . . . . . . . 9
Part Names and Functions. . . . . . . . . . 10
Computer Input . . . . . . . . . . . . . . . . . . 34
Computer System Selection
34
Auto PC Adjustment
35
Manual PC Adjustment
36
Image Level Selection
38
Screen Size Adjustment
39
Video Input . . . . . . . . . . . . . . . . . . . . . . 41
Video System Selection
41
Image Level Selection
42
Screen Size Adjustment
43
Front
10
Back
10
Terminals and Connectors
11
Side Control and Indicators
12
Side Control
12
Indicators
13
Remote Control
14
Filter Instructions
57
Remote Control Battery Installation
15
Replacing the Filter Cartridge
58
Remote Control Receivers and Operating Range
15
Resetting the Filter Counter
59
Wired Remote Control
15
Resetting the Scroll Counter
59
Remote Control Code
16
Lamp Management
60
Installation . . . . . . . . . . . . . . . . . . . . . . 17
Lamp Replacement
61
Resetting the Lamp Counter
62
Cleaning the Projection Lens
64
Cleaning the Projector Cabinet
64
Warning Indicators
65
Lens Installation
17
Picture Image . . . . . . . . . . . . . . . . . . . . 45
Image Adjustment
45
Setting . . . . . . . . . . . . . . . . . . . . . . . . . . 48
Setting
48
Maintenance and Care . . . . . . . . . . . . . 57
Positioning Projector
17
Lens Shift Adjustment
18
Picture Level and Pitch Adjustment
18
Terminals of Projector
19
Connecting to Computer
20
Troubleshooting
66
Connecting to Video Equipment
21
Menu Tree
69
Connecting the AC Power Cord
22
Indicators and Projector Condition
72
Compatible Computer Specifications
75
Technical Specifications
77
Optional Parts
78
Configurations of Terminals
79
Basic Operation . . . . . . . . . . . . . . . . . . 23
Turning On the Projector
23
Turning Off the Projector
24
How to Operate the On-Screen Menu
25
Menu Bar
26
Operating with Projector Control
27
Operating with Remote Control
29
Appendix . . . . . . . . . . . . . . . . . . . . . . . . 66
PIN Code Number Memo
80
Dimensions
81
Input Selection . . . . . . . . . . . . . . . . . . . 31
Input
31
Computer Input Source Selection
32
Video Input Source Selection
33
Trademarks
Each name of corporations or products in this book is either a registered trademark or a trademark of its respective
corporation.
LX1000 User Manual
020-000141-01 Rev. 1 (05-2009)
3
To The Owner
Before installing and operating the projector, read this
manual thoroughly.
The projector provides many convenient features and
functions. Operating the projector properly enables you to
manage those features and maintains it in good condition for
many years to come.
Improper operation may result in not only shortening the
product life, but also malfunctions, fire hazard, or other
accidents.
If your projector seems to operate improperly, read this
manual again, check operations and cable connections and
try the solutions in the “Troubleshooting” section in the
back of this manual. If the problem still persists, contact the
dealer where you purchased the projector or the service
center.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRIC
SHOCK, DO NOT REMOVE COVER (OR
BACK). NO USER-SERVICEABLE PARTS
INSIDE EXCEPT LAMP REPLACEMENT.
REFER SERVICING TO QUALIFIED SERVICE
PERSONNEL.
Safety Precaution
WARNING:
LTHIS APPARATUS MUST BE EARTHED.
LTO REDUCE THE RISK OF FIRE OR ELECTRIC
SHOCK, DO NOT EXPOSE THIS APPLIANCE TO
RAIN OR MOISTURE.
– This projector produces intense light from the projection lens.
Do not stare directly into the lens, otherwise eye damage could
result. Be especially careful that children do not stare directly
into the beam.
– Install the projector in a proper position. Otherwise it may
result in a fire hazard.
– Allowing the proper amount of space on the top, sides, and
rear of the projector cabinet is critical for proper air circulation
and cooling of the unit. The diagrams shown here indicates the
minimum space required. If the projector is to be built into a
compartment or similarly enclosed, these minimum distances
must be maintained.
– Do not cover the ventilation slots on the projector. Heat buildup can reduce the service life of your projector, and can also be
dangerous.
SIDE and TOP
REAR
3.3' (1m)
3.3' (1m)
THIS SYMBOL INDICATES THAT DANGEROUS
VOLTAGE CONSTITUTING A RISK OF ELECTRIC
SHOCK IS PRESENT WITHIN THIS UNIT.
THIS SYMBOL INDICATES THAT THERE ARE
IMPORTANT OPERATING AND MAINTENANCE
INSTRUCTIONS IN THE OWNER’S MANUAL WITH
THIS UNIT.
The symbol mark and recycling systems described below
apply to EU countries and do not apply to countries in other
areas of the world.
Your product is designed and manufactured with high quality materials and components which can be recycled and/or
reused.
The symbol mark means that electrical and electronic
equipment, batteries and accumulators, at their end-of-life,
should be disposed of separately from your household
waste.
Note:
If a chemical symbol is printed beneath the symbol mark,
this chemical symbol means that the battery or accumulator contains a heavy metal at a certain concentration. This
will be indicated as follows: Hg: mercury, Cd: cadmium, Pb:
lead.
In the European Union there are separate
collection systems for used electrical and
electronic equipment, batteries and accumulators.
Please, dispose of them correctly at your
local community waste collection/recycling
centre.
Please, help us to conserve the environment we live in!
READ AND KEEP THIS OWNER'S MANUAL FOR LATER
USE.
4
3.3' (1m)
3.3' (1m)
– If the projector is unused for an extended time, unplug the
projector from the power outlet.
– Do not project the same image for a long time, since the
afterimage may remain on the LCD panels by the characteristic
of panel.
CAUTION ON HANGING FROM THE CEILING
When hanging the projector from the
ceiling, clean the air intake vents and
top of the projector periodically with a
vacuum cleaner. If you leave the projector
unclean for a long time, the cooling fans
can be clogged with dust, and it may
cause a breakdown or a disaster.
DO NOT SET THE PROJECTOR IN GREASY, WET, OR
SMOKY CONDITIONS SUCH AS IN A KITCHEN TO
PREVENT A BREAKDOWN OR A DISASTER. IF THE
PROJECTOR COMES IN CONTACT WITH OIL OR
CHEMICALS, IT MAY BECOME DETERIORATED.
CAUTION
Not for use in a computer room as defined in the
Standard for the Protection of Electronic Computer/Data
Processing Equipment, ANSI/NFPA 75.
Ne peut être utilisé dans une salle d’ordinateurs telle
que définie dans la norme ANSI/NFPA 75 Standard for
Protection of Electronic Computer/Data Processing
Equipment.
LX1000 User Manual
020-000141-01 Rev. 1 (05-2009)
Safety Instructions
All the safety and operating instructions should be read
before the product is operated.
Read all of the instructions given here and retain them for
later use. Unplug this projector from AC power supply
before cleaning. Do not use liquid or aerosol cleaners. Use a
damp cloth for cleaning.
This projector should be operated only from the type of
power source indicated on the marking label. If you are not
sure of the type of power supplied, consult your authorized
dealer or local power company.
Follow all warnings and instructions marked on the projector.
Do not overload wall outlets and extension cords as this
can result in fire or electric shock. Do not allow anything to
rest on the power cord. Do not locate this projector where
the cord may be damaged by persons walking on it.
For added protection to the projector during a lightning
storm, or when it is left unattended and unused for long
periods of time, unplug it from the wall outlet. This will
prevent damage due to lightning and power line surges.
Do not attempt to service this projector yourself as opening
or removing covers may expose you to dangerous voltage
or other hazards. Refer all servicing to qualified service
personnel.
Do not expose this unit to rain or use near water... for
example, in a wet basement, near a swimming pool, etc...
D o n o t u s e a tt a ch m e n t s n o t r e c o m m e n d e d by t h e
manufacturer as they may cause hazards.
Do not place this projector on an unstable cart, stand, or
table. The projector may fall, causing serious injury to a child
or adult, and serious damage to the projector. Use only with
a cart or stand recommended by the manufacturer, or sold
with the projector. Wall or shelf mounting should follow the
manufacturer's instructions, and should use a mounting kit
approved by the manufacturers.
An appliance and cart combination
should be moved with care. Quick
stops, excessive force, and uneven
surfaces may cause the appliance and
cart combination to overturn.
Slots and openings in the back and bottom of the cabinet are
provided for ventilation, to ensure reliable operation of the
equipment and to protect it from overheating.
Unplug this projector from wall outlet and refer servicing to
qualified service personnel under the following conditions:
a. When the power cord or plug is damaged or frayed.
b. If liquid has been spilled into the projector.
c. If the projector has been exposed to rain or water.
d. If the projector does not operate normally by following
the operating instructions. Adjust only those controls
that are covered by the operating instructions as
improper adjustment of other controls may result in
damage and will often require extensive work by a
qualified technician to restore the projector to normal
operation.
e. If the projector has been dropped or the cabinet has
been damaged.
f. When the projector exhibits a distinct change in
performance-this indicates a need for service.
When replacement parts are required, be sure the service
technician has used replacement parts specified by the
manufacturer that have the same characteristics as the
original part. Unauthorized substitutions may result in fire,
electric shock, or injury to persons.
Upon completion of any service or repairs to this projector,
ask the ser vice technician to perform routine safety
checks to determine that the projector is in safe operating
condition.
The openings should never be covered with cloth or other
materials, and the bottom opening should not be blocked
by placing the projector on a bed, sofa, rug, or other similar
surface. This projector should never be placed near or over a
radiator or heat register.
This projector should not be placed in a built-in installation
such as a book case unless proper ventilation is provided.
NOTE FOR CUSTOMERS IN THE US
Never push objects of any kind into this projector through
cabinet slots as they may touch dangerous voltage points
or short out parts that could result in a fire or electric shock.
Never spill liquid of any kind on the projector.
Hg LAMP(S) INSIDE THIS PRODUCT CONTAIN MERCURY
AND MUST BE RECYCLED OR DISPOSED OF ACCORDING
TO LOCAL, STATE OR FEDERAL LAWS.
Do not install the projector near the ventilation duct of airconditioning equipment.
LX1000 User Manual
020-000141-01 Rev. 1 (05-2009)
5
Safety Instructions
Air Circulation
IMPORTANT!
Openings in the cabinet are provided for ventilation. To
ensure reliable operation of the product and to protect
it from overheating, these openings must not be
blocked or covered.
CAUTION
Hot air is exhausted from the exhaust vent. When
using or installing the projector, the following
precautions should be taken.
– Do not put any flammable object or spray can near
the projector, hot air is exhausted from the air vents.
– Keep the exhaust vent at least 3’ (1 m) away from
any objects.
– Do not touch peripheral parts of the exhaust vent,
especially screws and metallic parts. These areas will
become hot while the projector is being used.
– Do not put anything on the cabinet. Objects put on
the cabinet will not only get damaged but also may
cause fire hazard by heat.
– Do not cover vents with papers or other materials.
– Make sure that there are no objects under the
projector. An object under the projector may prevent
the projector from taking cooling air through bottom
vent.
Cooling fans are provided to cool down the projector.
The fans’ running speed is changed according to the
temperature inside the projector.
Filter Maintenance!!
The projector uses a lamp which generates
significant heat. The cooling fans and air vents are
provided to dissipate the heat by drawing air into the
housing and the filter is located in the intake vents to
prevent dust from getting inside of the projector.
In order to care for the projector appropriately,
regular cleaning is required. Remove any dirt or dust
that has accumulated on the projector.
If the projector reaches a time set in the timer
setting, a Filter replacement icon (Fig. 1) appears on
the screen and WARNING FILTER indicator on the
top panel lights up (see below), indicating that the
filter replacement is necessary.
If the projector detects that the filter is clogged and
no scroll is left in the filter cartridge, a Filter cartridge
replacement icon (Fig. 2) appears on the screen and
WARNING FILTER indicator on the top panel lights
up (see below). Stop using the projector immediately
and replace the filter cartridge.
Blocking the air vents and leaving the projector
uncleaned for a long time may not only damage the
projector and may require costly repairs but may also
cause accidents or fire.
For maintenance of the filter, refer to “Filter counter”
on page 56 and “Maintenance and Care” on pages
57–59.
Damages to the projector caused by using an
uncleaned filter or improper maintenance will
void the warranty on the projector.
Top Panel
Fig.1 Filter replacement icon
AIR INTAKE VENT
EXHAUST VENT
Fig.2 Filter cartridge replacement
icon
WARNING FILTER
indicator
6
LX1000 User Manual
020-000141-01 Rev. 1 (05-2009)
Safety Instructions
Installing the Projector in Proper Directions
Use the projector properly in specified positions. Improper positioning may reduce the lamp life and result in
severe accident or fire hazard.
This projector can project the picture in upward, downward, or inclined position in perpendicular direction to the
horizontal plane.
Note:
s4OINVERSEORREVERSETHEIMAGESETTHECEILINGFUNCTIONTOh/NvPP
s4HEPROJECTORCANNOTBEOPERATEDATANALTITUDEABOVEMETERS
Positioning Precautions
Avoid positioning the projector as described below when installing.
10˚
Do not roll the projector more
than 10 degrees from side to
side.
10˚
10˚
In upward projection, do
not tilt the projector over 10
degrees right and left.
10˚
Do not put the projector
on either side to project an
image.
In downward projection, do
not tilt the projector over 10
degrees right and left.
10˚
10˚
CAUTION ON CEILING MOUNTING
For ceiling mounting, you need the ceiling mount kit designed for this projector. When not mounted
properly, the projector may fall, causing hazards or injury. For details, consult your dealer. The warranty
on this projector does not cover any damage caused by use of any non-recommended ceiling mount kit
or installation of the ceiling mount kit in an improper location.
LX1000 User Manual
020-000141-01 Rev. 1 (05-2009)
7
Safety Instructions
Moving the Projector
Retract the adjustable feet to prevent damage
to lens and cabinet. For safety, holding the
projector on both sides by 2 or more people is
recommended to move the projector because
the projector is heavy. When moving the
projector by one person from necessity, hold
the handle carefully. Do not hold the lens
mount cover. Moving it improperly may result
in damage of cabinet or person's injury.
CAUTION IN CARRYING OR
TRANSPORTING THE PROJECTOR
–Do not drop or bump the projector, otherwise
damages or malfunctions may result.
–When carrying the projector, use a suitable carrying
case.
–Do not transport the projector by courier or any
other transport service in an unsuitable transport
case. This may cause damage to the projector. For
information about transporting the projector by
courier or any other transport service, consult your
dealer.
–Do not put the projector in a case before it is
cooled enough.
–Do not transport the projector with a replacement
lens installed.
8
LX1000 User Manual
020-000141-01 Rev. 1 (05-2009)
Compliance
Federal Communications Commission Notice
This equipment has been tested and found to comply with the limits for a Class A digital device,
pursuant to Part 15 of FCC Rules. These limits are designed to provide reasonable protection against
harmful interference when the equipment is operated in a commercial environment. This equipment
generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance
with the instruction manual, may cause harmful interference to radio communications. Operation of
this equipment in a residential area is likely to cause harmful interference in which case the user will be
required to correct the interference at his own expense.
Do not make any changes or modifications to the equipment unless otherwise specified in the
instructions. If such changes or modifications should be made, you could be required to stop operation
of the equipment.
Canadian Radio Interference Regulations
This Class A digital apparatus meets all requirements of the Canadian ICES-003.
WARNING
This is a Class A product. In a domestic environment this product may cause radio interference in
which case the user may be required to take adequate measures.
AC Power Cord Requirement
The AC Power Cord supplied with this projector meets the requirement for use in the country you purchased it.
AC Power Cord for the United States and Canada:
AC Power Cord used in the United States and Canada is listed by the Underwriters
Laboratories (UL) and certified by the Canadian Standard Association (CSA).
AC Power Cord has a grounding-type AC line plug. This is a safety feature to be sure
that the plug will fit into the power outlet. Do not try to defeat this safety feature.
Should you be unable to insert the plug into the outlet, contact your electrician.
GROUND
THE SOCKET-OUTLET SHOULD BE INSTALLED NEAR THE EQUIPMENT AND EASILY ACCESSIBLE.
LX1000 User Manual
020-000141-01 Rev. 1 (05-2009)
9
Part Names and Functions
Front
B
DLens Mount Cover
JProjection Lens (Option)
8 Indicators
EInfrared Remote Receiver (Front)
D
G Adjustable Feet
LTerminals and Connectors
H Handle
< Side Control
B Lamp Cover
J
8 E G
L
H
<
G
Infrared Remote Receiver (Rear)
Exhaust Vent
CAUTION
Back
Hot air is exhausted from the exhaust
vent. Do not put heat-sensitive objects
near this side.
Main On/Off Switch
Power Cord Connector
Air Intake Vent
Air Filter Cover
=
G
G
=Kensington Security Slot
This slot is for a Kensington lock used
to deter theft of the projector.
*Kensington is a registered trademark of ACCO Brands
Corporation.
10
LX1000 User Manual
020-000141-01 Rev. 1 (05-2009)
Part Names and Functions
Terminals and Connectors
D
J
8
E
G
L
H
<
=
DSERIAL PORT IN TERMINAL
If you control the projector by computer, you must
connect a cable (not supplied) from your computer
to this terminal.
GDVI INPUT TERMINAL
JSERIAL PORT OUT TERMINAL
This terminal outputs signal from SERIAL PORT IN.
More than two projectors can be controlled with
one computer by connecting SERIAL PORT IN of
another projector to this terminal.
L D-sub 15-PIN INPUT TERMINAL
Connect computer output (Analog D-sub 15-pin
type) to this terminal. (pp.20-21)
8USB CONNECTOR (Series B)
USB connector is to used to service the projector.
ER/C JACK
When using the wired remote control, connect the
wired remote control to this jack with a remote
control cable (not supplied).
Connect computer output (Digital/DVI-D type) to
this terminal. (p.20)
HD (HDCP Compatible) signal can be also
connected. (p.21)
H5 BNC INPUT JACKS
Connect the component or composite video
output signal from video equipment to VIDEO/Y,
Pb/Cb, and Pr/Cr jacks or connect the computer
output signal (5 BNC Type [Green, Blue, Red,
Horiz. Sync, and Vert. Sync.]) to G, B, R, H/V, and V
jacks. (pp.20–21)
<S-VIDEO INPUT JACK
Connect the S-VIDEO output signal from video
equipment to this jack (p.21).
;RESET button
!BUILTINMICROPROCESSORWHICHCONTROLSTHISUNITMAY
OCCASIONALLYMALFUNCTIONANDNEEDTOBERESET4HISCANBEDONE
BYPRESSINGTHE2%3%4BUTTONWITHAPENWHICHWILLSHUTDOWN
ANDRESTARTTHEUNIT$ONOTUSETHE2%3%4FUNCTIONEXCESSIVELY
LX1000 User Manual
020-000141-01 Rev. 1 (05-2009)
11
Part Names and Functions
Side Control and Indicators
INDICATORS
SIDE CONTROLS
Side Control
D
H
J
<
8
B
E
G
L
DON/STAND-BY button
Turn the projector on or off. (pp.23,24)
JZOOM button
Zoom in and out the images. (p.27)
8 MENU button
Open or close the On-Screen MENU. (pp.25, 26)
E POINT buttons
- Select an item or adjust the value in the OnScreen MENU. (p.25)
- Pan the image in DIGITAL ZOOM + mode. (p.40)
GSHUTTER button
Close and open up the built-in shutter. (p.27)
LAUTO PC ADJ. button
HLENS SHIFT button
Select the LENS SHIFT function. (p.27)
<FOCUS button
Adjust the focus. (p.27)
B INPUT button
Select an input source INPUT 1, INPUT 2, Input 3
or Input 4. (pp.31-33)
SELECT button
Used to execute the selected item. (p.25) It is also
used to expand image in DIGITAL ZOOM mode.
(p.40)
INFORMATION button
Display the input source information (p.28).
Automatically adjust the computer image to its
optimum setting. (pp.27, 35)
12
LX1000 User Manual
020-000141-01 Rev. 1 (05-2009)
Part Names and Functions
Indicators
D
J
8
DLAMP Indicator
This indicator is dim when the projector is turned
on. And bright when the projector is in stand-by
mode. (pp.72-74)
JREADY indicator
This indicator lights green when the projector is
ready to be turned on. And it flashes green in
Power Management mode. (pp.52, 72-74)
E
G
L
H
8WARNING TEMP. indicator
This indicator flashes red when internal projector
temperature is too high. (pp.65, 72-74)
EWARNING FILTER indicator
–Blink slow when the filter is being scrolled (pp.
57, 72).
–Blink fast when the filter scroll is not working
properly or the filter cartridge is not installed
(pp.57, 74).
–Light orange when the clogging of the filter is
detected or the filter counter reaches a time set
in the timer setting, urging immediate filter/ filter
cartridge replacement (pp.56, 57, 74).
GSHUTTER indicator
Light blue when the shutter is closed. (p72)
LLAMP 2 REPLACE indicator
Turn orange when the life of the projection lamp2
draws to an end. (pp.61, 73)
H LAMP 1 REPLACE indicator
Turn orange when the life of the projection lamp1
draws to an end. (pp.61, 73)
LX1000 User Manual
020-000141-01 Rev. 1 (05-2009)
13
Appendix
Configurations of Terminals
ANALOG (Mini D-sub 15 pin)
4
5
10
15
9
14
2
3
8
13
1
7
12
6
11
1
2
3
4
5
6
7
8
Red Input
Green Input
Blue Input
1
2
3
4
5
6
7
8
T.M.D.S. Data2–
T.M.D.S. Data2+
T.M.D.S. Data2 Shield
No Connect
No Connect
DDC Clock
DDC Data
No Connect
No Connect
Ground (Horiz.sync.)
Ground (Red)
Ground (Green)
Ground (Blue)
9
10
11
12
13
14
15
+5V Power
Ground (Vert. sync.)
Ground
DDC Data
Horiz. sync.
Vert. sync.
DDC Clock
DIGITAL DVI-D (DVI 24 PIN)
1 2 3 4 5 6 7 8
9 10 11 12 13 14 15 16
17 18 19 20 21 22 23 24
9
10
11
12
13
14
15
16
T.M.D.S. Data1–
T.M.D.S. Data1+
T.M.D.S. Data1 Shield
No Connect
No Connect
+5V Power
Ground (for +5V)
Hot Plug Detect
17
18
19
20
21
22
23
24
T.M.D.S. Data0–
T.M.D.S. Data0+
T.M.D.S. Data0 Shield
No Connect
No Connect
T.M.D.S. Clock Shield
T.M.D.S. Clock+
T.M.D.S. Clock–
USB CONNECTOR (Series B)
2
1
3
4
1
2
3
4
Vcc
- Data
+ Data
Ground
CONTROL PORT CONNECTOR (D-sub 9 pin)
Serial
1
2
3
4
5
6
7
8
9
----RXD
TXD
----SG
----RTS
CTS
-----
79
LX1000 User Manual
020-000141-01 Rev. 1 (05-2009)
Part Names and Functions
Remote Control Battery Installation
1
Open the battery
compartment lid.
2
Install new batteries into
the compartment.
Pull up the lid
and remove it.
3
Replace the
compartment lid.
Two AA size batteries
For correct polarity (+ and –),
be sure battery terminals are
in contact with pins in the
compartment.
To ensure safe operation, please observe the following precautions :
L Use two (2) AA or LR6 type alkaline batteries.
L Always replace batteries in sets.
L Do not use a new battery with a used battery.
L Avoid contact with water or liquid.
L Do not expose the remote control to moisture or heat.
L Do not drop the remote control.
L If the battery has leaked on the remote control, carefully wipe the case clean and install new batteries.
L Risk of an explosion if battery is replaced by an incorrect type.
L Dispose of used batteries according to the instructions.
Remote Control Receivers and Operating Range
Point the remote control toward the projector (to
Infrared Remote Receivers) when pressing the buttons.
Maximum operating range for the remote control is
about 16.4’ (5 m) and 60 degrees in front and rear of the
projector.
16.4’
(5 m)
Infrared Remote Receivers are provided both in front and
back of the projector. You can conveniently use both of
the receivers.(pp. 10, 52)
Note:
s7HEN HANGING THE PROJECTOR FROM THE CEILING SELECT THE
)NFRARED 2EMOTE 2ECEIVER WHICH IS LOCATED FARTHER AWAY
FROMTHEFLUORESCENTLIGHTP
16.4’
(5 m)
Wired Remote Control
The remote control can be used as a wired remote control. Wired remote control helps you use the remote control outside
of the operating range (16.4’/ 5 m). Connect the remote control and the projector with the remote control cable (sold
separately). Connected with the remote control cable, the remote control does not emit wireless signal.
LX1000 User Manual
020-000141-01 Rev. 1 (05-2009)
15
Part Names and Functions
Remote Control Code
The eight different remote control codes (Code 1–Code 8) are assigned to this projector. Switching the remote
control codes prevents interference from other remote controls when several projectors or video equipment
next to each other are operated at the same time. Change the remote control code for the projector first before
changing that for the remote control. See “Remote control” in the Setting Menu on page 52.
1
Check the Reset Switch to "Use position" in the
compartment lid on the back of the remote control.
2
While holding down the MENU button, press
and release the IMAGE ADJ. button the number
of corresponding times you would like to set the
number of the remote control code for the projector.
Remote Control Code
Code 1
Code 2
Code 3
Code 4
Code 5
Code 6
Code 7
Code 8
Use position
Reset position
Reset switch
Number of Times
Pressing IMAGE ADJ.
button
1
2
3
4
5
6
7
8
MENU button
IMAGE ADJ.
button
16
LX1000 User Manual
020-000141-01 Rev. 1 (05-2009)
Installation
Lens Installation
Before setting up the projector, install Projection Lens on the projector.
Before installation, check where the projector is used and prepare a suitable lens. For the specifications of
Projection Lens, contact sales dealer where you purchased the projector.
- Do not use the optional lens below for this projector. Otherwise damages may result.
LENS MODEL NO. : 38-809041-02
- Lens installation and replacement should be made by the qualified service personnel.
- When setting the projector after lens installation, be sure to replace a Lens Cap to protect a
surface.
- When carrying or holding up the projector, be careful not to put your hands on lens part. It may
damage lens, cabinet, or mechanical parts.
Positioning Projector
This projector is designed to project on a flat projection
surface.
SCREEN
Note:
s"RIGHTNESSINROOMHASAGREATINFLUENCEONPICTUREQUALITY
)T IS RECOMMENDED TO LIMIT AMBIENT LIGHTING IN ORDER TO
PROVIDETHEBESTIMAGE
LX1000 User Manual
020-000141-01 Rev. 1 (05-2009)
17
Installation
Lens Shift Adjustment
Projection lens can be moved from side to side and up and down with the motor-driven lens shift function. This
function makes the positioning of images easy on the screen.(See page 27)
The display position can be
shifted upward up to 50%
elevation of the display.
The display position can be
shifted downward up to 50%
low level of the display.
When the lens is shifted to top.
The display position can be
shifted to the left in up to
10% width of the display.
When the lens is shifted to leftmost.
When the lens is shifted to bottom.
The display position can be
shifted to the right in up to
10% width of the display.
When the lens is shifted to rightmost.
Picture Level and Pitch Adjustment
The projection angle is adjustable up to 2.8 degrees
upward and downward respectively by rotating front and
back feet .
REAR ADJUSTABLE
FEET (Refer to p.10)
To raise the projector, rotate the feet clockwise.
To lower the projector or to retract the adjustable feet,
rotate the feet counterclockwise.
To correct keystone distortion, press the KEYSTONE
button on the remote control or select Keystone from the
menu (see pages 14, 30, 40, 44).
Do not rotate the adjustable feet when you
see the red line on the adjustable feet. The
adjustable feet may fall off.
18
ADJUSTABLE
FEET
LX1000 User Manual
020-000141-01 Rev. 1 (05-2009)
Installation
Terminals of Projector
The projector has two replaceable Interface board slots. The projector's functions can be extended by installing
the optional interface boards into the terminal slots. 2 vacant slots (Input 3 and 4) are provided in your
purchasing the projector. For the Optional Interface Boards, contact sales dealer where you purchased the
projector.
2 TERMINAL SLOTS (Factory set)
INPUT/OUTPUT
TERMINALS
DVI / D-sub 15 Terminal
5-BNC / VideoTerminal
Replacement of Terminal
Note:
s)NTHEREPLACEMENTOFINTERFACEBOARDTURNOFFTHE
PROJECTORPRESSTHE-AIN/N/FF3WITCHTO/FFAND
UNPLUGTHE!#POWERCORDFROMTHE!#OUTLET
1
Remove 2 Screws from an interface board.
2
Pull out the interface board.
3
Replace the interface board. Insert a new interface
board along Guide to fit Plug into Socket.
4
Screws
Tighten screws to secure the interface board.
Guide
NOTES ON ORDERING OR USING
OPTIONAL INTERFACE BOARD
Socket
When ordering or using Optional Interface Board, contact
your sales dealer. When contacting the sales dealer, tell
the Option Control Number (Op.cont.No.) in the menu that
is located on the bottom of the information menu.
(See page 28)
Plug
LX1000 User Manual
020-000141-01 Rev. 1 (05-2009)
Figure shows Dual-SDI terminal.
19
Installation
Connecting to Computer
Cables used for connection
s6'!#ABLE$SUBPIN)*
sDVI Cable
sBNC Cable (BNC x 5)
( *One cable is supplied;Other cables are not supplied with this projector.)
Laptop type
Desktop type
Monitor Output
Monitor Output Monitor Output
DVI Cable
VGA Cable
BNC Cable
G
DIGITAL
B
R
H/HV
V
ANALOG
Terminals of
the projector
5NPLUG THE POWER CORDS OF BOTH THE
PROJECTOR AND EXTERNAL EQUIPMENT FROM
THE!#OUTLETBEFORECONNECTINGCABLES
20
LX1000 User Manual
020-000141-01 Rev. 1 (05-2009)
Installation
Connecting to Video Equipment
Cables used for connection
sVideo Cable (BNC x 3, BNC x 1)
sSCART-VGA Cable sDVI Cable
sS-Video Cable
( Cables are not supplied with the projector.)
Component video output equipment.
Video Source (example)
Video Cassette Recorder
Digital Output
(HDCP compatible)
RGB SCART Composite
21-pin Output Video Output
SCART-VGA
DVI Cable
DIGITAL
Cable
ANALOG
(such as DVD player or
high-definition TV source.)
Video Disc Player
BNC
Cable
VIDEO
Component Video Output
Y
S-Video Output
Pb/Cb Pr/Cr
BNC
Cable
Y-Pb/Cb-Pr/Cr
S-Video Cable
S-VIDEO
Terminals of
the projector
5NPLUG THE POWER CORDS OF BOTH THE
PROJECTOR AND EXTERNAL EQUIPMENT FROM
THE!#OUTLETBEFORECONNECTINGCABLES
LX1000 User Manual
020-000141-01 Rev. 1 (05-2009)
21
Installation
Connecting the AC Power Cord
This projector uses nominal input voltages of 100-120 or 200–240
V AC. It is designed to work with single-phase power systems
having a grounded neutral conductor. To reduce the risk of
electrical shock, do not plug into any other type of power system.
If you are not sure of the type of power being supplied, consult
your authorized dealer or service station.
Connect the projector with all peripheral equipment before turning
on the projector.
CAUTION
The AC outlet must be near this equipment and must be easily
accessible.
Note:
s5NPLUG THE !# POWER CORD OR TURN OFF THE -!). /./&&
3WITCHWHENTHEPROJECTORISNOTINUSE7HENTHEPROJECTOR
ISINSTANDBYMODEITCONSUMESALITTLEELECTRICPOWER
Connect the AC power cord (supplied) to the
projector.
NOTE ON THE POWER CORD
AC power cord must meet the requirements of the country where you use the projector.
Confirm the AC plug type with the chart below and proper AC power cord must be used.
If the supplied AC power cord does not match your AC outlet, contact your sales dealer.
Projector side
AC Outlet side
For the U.S.A. and Canada
For Continental Europe
Ground
To POWER CORD
CONNECTOR on your
projector.
22
To the AC Outlet.
(120 V AC)
To the AC Outlet.
(200–240 V AC)
LX1000 User Manual
020-000141-01 Rev. 1 (05-2009)
Basic Operation
Turning On the Projector
1
Complete peripheral connections (with a computer,
VCR, etc.) before turning on the projector.
2
Connect the projector’s AC power cord into an AC
outlet and turn on the MAIN ON/OFF Switch. The
LAMP indicator lights red and the READY indicator
lights green.
3
Press the ON/STAND-BY button on the side control
or on the remote control. The LAMP indicator
dims red and the cooling fans start to operate. The
preparation display appears on the screen and the
countdown starts.
4
16
The preparation display will disappear after 20
seconds.
Selected Input Source and Lamp control
After the countdown, the input source that was
selected the last time and the Lamp mode icon (see
page 60) appear on the screen.
If the projector is locked with a PIN code, PIN code
Input Dialog Box will appear. Enter the PIN code as
instructed below.
Lamp mode
See page 60 for the Lamp mode status
Note:
s4HE,AMPREPLACEMENTICONANDTHE&ILTERWARNING
ICONMAYAPPEARONTHESCREENDEPENDINGONTHE
USAGESTATEOFTHEPROJECTOR
Enter a PIN code
Use the Point ! buttons on the side control or on the
remote control to enter a number. Press the Point button to fix the number and move the red frame pointer
to the next box. The number changes to “3.” Repeat
this step to complete entering a four-digit number. After
entering the four-digit number, move the pointer to “Set.”
Press the SELECT button so that you can start to operate
the projector.
If you fixed an incorrect number, use the Point button
to move the pointer to the number you want to correct,
and then enter the correct number.
If you entered an incorrect PIN code, “PIN code” and the
number (3333) will turn red for a moment. Enter the
correct PIN code all over again.
What is PIN code?
PIN (Personal Identification Number) code is a security
code that allows the person who knows it to operate the
projector. Setting a PIN code prevents unauthorized use
of the projector.
A PIN code consists of a four-digit number. Refer to the
PIN code lock function in the Setting Menu on page 5354 for locking operation of the projector with your PIN
code.
LX1000 User Manual
020-000141-01 Rev. 1 (05-2009)
PIN code Input Dialog Box
After the OK icon
disappears, you can
operate the projector.
Note:
s7HENTHE,OGOSELECTFUNCTIONISSETTOh/FFvTHE
LOGOWILLNOTBESHOWNONTHESCREENP
s7HENTHEh#OUNTDOWNOFFvORh/FFvISSELECTED
INTHE$ISPLAYFUNCTIONTHECOUNTDOWNWILLNOTBE
SHOWNONTHESCREENP
s$URINGTHECOUNTDOWNPERIODALLOPERATIONSARE
INVALID
s)FTHE0).CODENUMBERISNOTENTEREDWITHINTHREE
MINUTESAFTERTHE0).CODEDIALOGBOXAPPEARED
THEPROJECTORWILLBETURNEDOFFAUTOMATICALLY
s4HEhvISSETASTHEINITIAL0).CODEATTHE
FACTORY
CAUTION ON HANDLING PIN CODE
If you forget your PIN code, the projector
can no longer be started. Take special care
in setting a new PIN code; write down the
number in a column on page 80 of this
manual and keep it on hand. Should the
PIN code be missing or forgotten, consult
your dealer or service center.
23
Basic Operation
Turning Off the Projector
1
Press the ON/STAND-BY button on the side control
or on the remote control, and “Power off?” appears
on the screen.
2
Press the ON/STAND-BY button on the side control
or on the remote control again to turn off the
projector. The LAMP indicator lights bright and the
READY indicator turns off. After the projector is
turned off, the cooling fans operate. You cannot turn
on the projector during this cooling down period.
3
When the projector has cooled down enough, the
READY indicator lights green and then you can turn
on the projector. To turn off the MAIN ON/OFF
Switch, wait until the projector is completely cooled
down.
4
Unplug the AC power cord from the AC outlet.
“Power off?” disappears after 4 seconds.
TO MAINTAIN THE LIFE OF THE LAMP, ONCE YOU
TURN THE PROJECTOR ON, WAIT AT LEAST FIVE
MINUTES BEFORE TURNING IT OFF.
DO NOT UNPLUG THE AC POWER CORD WHILE
COOLING FANS ARE RUNNING OR BEFORE THE
READY INDICATOR LIGHTS GREEN AGAIN.
OTHERWISE IT WILL RESULT IN SHORTENING OF
THE LAMP LIFE.
DO NOT OPERATE THE PROJECTOR CONTINUOUSLY
WITHOUT REST. CONTINUOUS USE MAY RESULT IN
SHORTENING THE LAMP LIFE.
Note:
s7HENTHE/NSTARTFUNCTIONISSETTOh/NvTHEPROJECTOR
WILLBETURNEDONAUTOMATICALLYBYCONNECTINGTHE!#POWER
CORDTOAN!#OUTLETP
s4HERUNNINGSPEEDOFCOOLINGFANSISCHANGEDACCORDINGTO
THETEMPERATUREINSIDETHEPROJECTOR
s$ONOTPUTTHEPROJECTORINACASEBEFORETHEPROJECTORIS
COOLEDENOUGH
s)FTHE7!2.).'4%-0INDICATORBLINKSREDSEEh7ARNING
)NDICATORSvONPAGE
s4HEPROJECTORCANNOTBETURNEDONDURINGTHECOOLING
PERIODWITHTHE2%!$9INDICATORTURNEDOFF9OUCANTURNIT
ONAGAINAFTERTHE2%!$9INDICATORBECOMESGREENAGAIN
24
LX1000 User Manual
020-000141-01 Rev. 1 (05-2009)
Basic Operation
How to Operate the On-Screen Menu
The projector can be adjusted or set via the On-Screen
Menu. For each adjustment and setting procedure, refer
to the respective sections in this manual.
Side Control
MENU button
1
Press the MENU button on the side control or the
remote control to display the On-Screen Menu.
2
Use the Point buttons to select a Menu icon.
Use the Point ! buttons to select an item in the
selected menu.
3
Press the SELECT button to show the item data.
Use the Point buttons to adjust the values.
POINT buttons
SELECT button
Remote Control
MENU button
To close the On-Screen Menu, press the MENU
button again.
Note:
s4HESELECTEDITEMISNOTACTIVEUNTILTHE3%,%#4BUTTONIS
PRESSED
POINT buttons
SELECT button
On-Screen Menu
Menu icon
Menu bar
Pointer (red frame )
Press the Point ! buttons
to move the pointer.
Pointer
(red frame )
Item
SELECT
button
Press the SELECT button here
to display previous items.
Item data
Press the Point buttons to adjust the
value.
Press the SELECT button here
to display next items.
LX1000 User Manual
020-000141-01 Rev. 1 (05-2009)
25
Basic Operation
Menu Bar
For detailed functions of each menu, see “Menu Tree” on pages 69-71.
For Computer Source
D
J
8
E
G
L
H
<
B
DGuide Window
LImage Adjust Menu
Show the selected Menu of the On-Screen Menu.
Used to adjust the computer image. [Contrast/ Brightness/
Color management/Auto picture control/Color temp./White
balance (R/G/B)/Offset (R/G/B)/Sharpness/ Gamma/Reset/
Store] (pp. 45-47).
JInput Menu
Used to select an input source Computer or Video (pp. 3133).
HScreen Menu
8PC System Menu
Used to select computer system (p. 34).
Used to adjust the size of the image. [Normal/True/Wide/
Full screen/Custom/Keystone/Ceiling/Rear/Reset/Digital
zoom +/–] (pp.39-40).
EPC Adjust Menu
<Setting Menu
Used to adjust the parameters to match with the input signal
format (pp. 35-37).
Used to set the projector’s operating configurations
(pp. 48-56).
GImage Select Menu
BInformation Menu
Used to select an image level among Standard, Real, and
Image 1–10(p. 38).
Display the input source information(p. 28).
For Video Source
D
J
8
E
G
L
H
<
DGuide Window
GImage Adjust Menu
Show the selected Menu of the On-Screen Menu.
Used to adjust the picture image. [Contrast/Brightness/
Color/Tint/Color management/ Auto picture control/Color
temp./White balance (R/G/B)/ Offset (R/G/B)/Sharpness/
Gamma/Noise reduction/Progressive/Reset/Store]
(pp. 45-47)
JInput Menu
Used to select an input source Computer or Video (pp. 3133).
8AV System Menu
Used to select the system of selected video source (p. 41).
EImage Select Menu
Used to select an image level among Standard, Cinema, and
Image 1–10 (p. 42).
LScreen Menu
Used to adjust the size of the image. [Normal/Wide/
Custom/Keystone/Ceiling/Rear/Reset] (pp. 43-44).
HSetting Menu
Used to set the projector’s operating configurations
(pp. 48-56).
<Information Menu
Display the input source information(p. 28).
26
LX1000 User Manual
020-000141-01 Rev. 1 (05-2009)
Basic Operation
Operating with Projector Control
Zoom Adjustment
Display “Zoom” on the screen. Press the ZOOM button
and then press the point ! buttons to zoom in and out
the image.
Side Control
ZOOM button
FOCUS button
Focus Adjustment
Display “Focus” on the screen. Press the FOCUS button
and then press the point ! buttons to adjust the focus
of the image.
LENS SHIFT
button
Lens Shift Adjustment
Display “Lens shift” on the screen. Use the Point ! buttons to position the screen to the desired point without
having picture distortion.
The screen can be moved up or down to 50 percent, or
sideways up to 10 percent from the central axis of the lens
shift.
POINT buttons
SHUTTER
button
AUTO PC ADJ.
button
Auto PC Adjustment
Zoom
Operate the Auto PC Adj. function. The computer screen
adjustment can be done easily by pressing this button.
See page 35 for details.
Focus
INFORMATION.
button
Note:
Shutter Function
s4HE ARROW DISAPPEARS AT THE MAXIMUM LENS SHIFT IN EACH
DIRECTION
s4HE ARROW TURNS RED WHEN THE LENS SHIFT COMES TO THE
CENTERPOSITIONOFTHESCREEN
Shutter function allows you to completely block out light
to the screen. Press the SHUTTER button to close the
shutter inside the projector. To open up the shutter, press
the SHUTTER button again. Refer to p.55 for detail of
setting for the Shutter function.
Note:
s4HE 3(544%2 BUTTON ON THE SIDE CONTROL AND THE REMOTE
CONTROLCANNOTBEEFFECTIVEWHEN3HUTTER0ROTECTIONIS/N
INTHE3ETTINGMENUP
s4HE 3(544%2 INDICATOR ON THE PROJECTORgS TOP LIGHTS BLUE
WHENTHESHUTTERISCLOSEDPP
s4HE PROJECTOR WILL SHUT DOWN AUTOMATICALLY WHEN THE SET
TIMEON3HUTTERMANAGEMENTHASPASSEDP
s4HE0OWERMANAGEMENTFUNCTIONDOESNOTWORKWHENTHE
SHUTTERISCLOSEDP
LX1000 User Manual
020-000141-01 Rev. 1 (05-2009)
27
Basic Operation
Information
Information Menu
Information display can be used to confirm the current
operating condition of the projector and the signal being
projected through the projector.
Information Menu
Press the INFORMATION button to display the
information window on the screen. To hide the
information window, press the INFORMATION button
again or Point buttons.
The information window can also be selected from the
menu.
* The H- and V-sync freq. values described in this figure
may be different from the actual values.
28
LX1000 User Manual
020-000141-01 Rev. 1 (05-2009)
Basic Operation
Operating with Remote Control
Using the remote control for some frequently used operations is advisable. Just pressing one of the buttons
enables you to make the desired operation quickly without calling up the On-Screen Menu.
AUTO PC button
Press the AUTO PC button on the remote control to
operate the Auto PC Adj. function. The computer screen
adjustment can be done easily by pressing this button.
See page 35 for details.
LENS SHIFT button
See page 27 for details.
Remote Control
AUTO PC
button
ZOOM buttons
Press the ZOOM buttons on the remote control to zoom
in and out the image. See page 27 for details.
POINT ! buttons
FOCUS buttons
Press the FOCUS buttons on the remote control to adjust
focus of the image. See page 27 for details.
LENS SHIFT
button
SCREEN
button
FREEZE button
Press the FREEZE button on the remote control to freeze
the picture on the screen. To cancel the FREEZE function,
press the FREEZE button again or press any other button.
SCREEN button
Press the SCREEN button on the remote control to select
the desired screen size. The selected screen size mode
appears on the screen for 4 seconds. See pages 39 to 40
and 43 to 44 for details.
Press and hold the SCREEN button for more than 5
seconds to return all the screen size adjustment setting
to the factory default setting.
ZOOM
buttons
FOCUS
buttons
FREEZE
button
D.ZOOM
button
INFO.
button
Note:
s3EETHENEXTPAGEFORTHEDESCRIPTIONOFOTHER
BUTTONS
D.ZOOM button
Press the D.ZOOM button on the remote control to enter
to the Digital zoom +/– mode. See page 40 for details.
INFO. button
Press the INFO. button on the remote control to display
the information window on the screen.
See the previous page for details.
LX1000 User Manual
020-000141-01 Rev. 1 (05-2009)
29
Basic Operation
Remote Control
SHUTTER button
See page 27 for details.
SHUTTER
button
FILTER button
Press and hold the FILTER button for more than five
seconds to replace the filter mechanically. See page 51
for details.
Note:
IMAGE ADJ.
button
s4HEFILTERCANNOTBEREWOUND
s7HEN THE FILTER IS REPLACED THE TOTAL ACCUMULATED TIME OF
THEFILTERUSEISAUTOMATICALLYSETTO
IMAGE ADJ. button
KEYSTONE
button
Press the IMAGE ADJ. button on the remote control to
adjust a image level of the screen.
For more detail, see pp.45-47.
P-TIMER
button
FILTER
button
IMAGE SEL.
button
IMAGE SEL. button
Note:
Press the IMAGE SEL. button on the remote control to
select a desired image level of the screen.
For more detail, see pp.38, 42.
s3EE THE PREVIOUS PAGE FOR THE DESCRIPTION OF
OTHERBUTTONS
P-TIMER button
Press the P-TIMER button on the remote control. The
Timer display “00 : 00” appears on the screen and starts
to count time (00 : 00–59 : 59).
To stop the P-TIMER, press the P-TIMER button.
To cancel the P-TIMER, press the P-TIMER button again.
P-Timer display
KEYSTONE button
Press the KEYSTONE button on the remote control. The
“Keystone” appears on the screen.
Use the Point ! buttons to correct keystone
distortion. The keystone adjustment can be stored
(pp.40, 44).
Reduce the upper width with
Point ! button.
30
Reduce the lower width
with Point button.
s4HEWHITEARROWSINDICATETHATTHEREISNOCORRECTION
s!REDARROWINDICATESTHEDIRECTIONOFCORRECTION
s!NARROWDISAPPEARSATTHEMAXIMUMCORRECTION
s)FYOUPRESSTHE+%934/.%BUTTONONTHEREMOTE
control again while the Keystone dialog box is being
displayed, the keystone adjustment will be canceled.
s4HEADJUSTABLERANGECANBELIMITEDDEPENDINGONTHE
input signal.
sh+EYSTONEvDISAPPEARSAFTERSECONDS
Reduce the left part with
Point button.
Reduce the right part with
Point button.
LX1000 User Manual
020-000141-01 Rev. 1 (05-2009)
Input Selection
Input
Side Control
Side Control button operation
INPUT button
INPUT 1
INPUT button
INPUT 2
INPUT 3
INPUT 4
Side Control Operation
Press the INPUT button on the side control. It switches to
INPUT 1, INPUT 2, INPUT 3 and INPUT 4 as you press the
INPUT button.
Before using the INPUT button on the side control, you
must select a correct input source by On-Screen Menu
and the latest input source will be displayed.
Remote Control
Remote Control button operation
INPUT buttons
Remote Control Operation
Press the INPUT 1, INPUT 2, INPUT 3 or INPUT 4 button
on the remote control. It switches to INPUT 1, INPUT 2,
INPUT 3 or INPUT 4 as you press the INPUT button.
Before using the INPUT button on the remote control, you
must select a correct input source by On-Screen Menu
and the latest input source will be displayed.
Note:
s%MPTYSLOTSCANNOTBESELECTED
s7HENASLOTISEMPTYTHEINPUTISDISPLAYEDINGRAYOUT
LX1000 User Manual
020-000141-01 Rev. 1 (05-2009)
31
Input Selection
Computer Input Source Selection
Menu Operation
When Selecting the INPUT 1 with DVI/D-sub 15 terminals
1
Press the MENU button to display the On-Screen Menu.
Use the Point buttons to move the red frame pointer
to the INPUT Menu icon.
2
Use the Point ! buttons to move the red arrow pointer
to the desired input and then press the SELECT button.
Then you can switch to the desired input.
3
Press the select button again. The Source Select Menu
appears.
4
Use the Point ! buttons to select the desired source
and then press the SELECT button.
INPUT MENU
Input Menu icon
Move the pointer (red arrow) to Input
1 and press the SELECT button.
Input 1
Source Select Menu
Move the pointer (red
arrow) to the desired source
and press the SELECT
button.
RGB (PC analog)
When your computer is connected to the INPUT 1 (ANALOG)
terminal, select RGB (PC analog).
RGB (PC digital)
When your computer is connected to INPUT 1 (DIGITAL)
terminal, select RGB (PC digital).
When Selecting the INPUT 2 with 5-BNC/Video/S-Video terminals
INPUT MENU
INPUT Menu icon
Move the pointer (red arrow) to Input
2 and press the SELECT button.
RGB
When your computer is connected to the INPUT 2 (5 BNC
INPUT JACKS) terminal, select RGB.
Input 2
Source Select Menu
Move the pointer (red
arrow) to RGB and press the
SELECT button.
Note:
s7HENASLOTISEMPTYTHEINPUTISDISPLAYEDINGRAYOUT
32
LX1000 User Manual
020-000141-01 Rev. 1 (05-2009)
Input Selection
Video Input Source Selection
Menu Operation
When Selecting the INPUT 1 with DVI/D-sub 15 terminals
INPUT MENU
When connecting to video equipment, select the type of
Video source in the Source Select Menu.
Input Menu icon
RGB (Scart)
When scart video equipment is connected to the INPUT 1
(ANALOG) terminal, select RGB (Scart).
Move the pointer (red arrow) to Input
1 and press the SELECT button.
RGB (AV HDCP)
If the HDCP-compatible signal source is connected to the
INPUT 1 (DIGITAL) terminal, select RGB (AV HDCP).
Input 1
Source Select Menu
Move the pointer (red
arrow) to RGB (Scart) or
RGB (AV HDCP) and press
the SELECT button.
When Selecting the INPUT 2 with 5-BNC/Video/S-Video terminals
When connecting to video equipment, select the type of
Video source in the Source Select Menu.
INPUT MENU
Y, Pb/Cb, Pr/Cr
Input Menu icon
When the video input signal is connected to the Y-Pb/CbPr/Cr jacks, select Y, Pb/Cb, Pr/Cr.
Move the pointer (red arrow) to Input
2 and press the SELECT button.
Video
When the video input signal is connected to the VIDEO
jack, select Video.
Input 2
S-Video
Source Select Menu
When the video input signal is connected to the S-VIDEO
jack, select S-Video.
Move the pointer (red
arrow) to Y, Pb/Cb, Pr/Cr ,
Video, or S-video and press
the SELECT button.
Note:
s( $#0 (IGHBANDWIDTH $IGITAL #ONTENT 0ROTECTION IS A
SYSTEMFORPROTECTINGDIGITALENTERTAINMENTCONTENTWHICHIS
DELIVEREDBY$6)$IGITAL6ISUAL)NTERFACEFROMBEINGCOPIED
4HE SPECIFICATION OF ($#0 IS DECIDED AND CONTROLLED BY
$IGITAL#ONTENT0ROTECTION,,#3HOULDTHESPECIFICATIONBE
CHANGED THIS PROJECTOR MAY NOT DISPLAY THE DIGITAL CONTENT
PROTECTEDBY($#0
s7HENASLOTISEMPTYTHEINPUTISDISPLAYEDINGRAYOUT
LX1000 User Manual
020-000141-01 Rev. 1 (05-2009)
33
Computer Input
Computer System Selection
Automatic Multi-Scan System
This projector automatically tunes to various types of computers based on VGA, SVGA, XGA, SXGA, SXGA+,
WXGA, UXGA, or WUXGA (refer to “Compatible Computer Specifications” on pages 75-76). If a computer is
selected as a signal source, this projector automatically detects the signal format and tunes to project a proper
image without any additional settings. (Some computers need to be set manually.)
One of the following messages may appear when:
Auto
The projector cannot recognize the connected
signal conforming to the provided PC Systems.
The “Auto” is displayed on the PC System Menu
icon and the Auto PC Adjustment function works to
display proper images. If the image is not projected
properly, a manual adjustment is required. (pp.
36–37.)
-----
There is no signal input from the computer. Check
the connection between your computer and the
projector. (See “Troubleshooting” on page 66.)
Mode 1
The preset system is manually adjusted in the PC
Adjust Menu. The adjusted data can be stored in
the Mode 1–10. (pp. 36-37)
SVGA 1
PC systems provided in this projector is chosen.
The projector chooses a proper system provided in
the projector and displays it.
PC SYSTEM MENU
PC System Menu icon
Selected system is displayed.
= Mode 1 and SVGA 1 are examples.
PC SYSTEM MENU
Selecting Computer System Manually
PC system can also be selected manually.
1
Press the MENU button to display the On-Screen Menu.
Use the Point buttons to move the red frame pointer
to the PC System Menu icon.
2
Use the Point ! buttons to move the red arrow pointer
to the desired system, and then press SELECT button.
34
PC System Menu icon
Selected system is displayed
Systems in this dialog box can be
selected.
Custom Mode (1–10) set in PC Adjust
Menu. (pp.36-37)
LX1000 User Manual
020-000141-01 Rev. 1 (05-2009)
Computer Input
Auto PC Adjustment
Auto PC Adjustment function is provided to automatically adjust Fine sync, Total dots, Horizontal and Vertical
positions to conform to your computer.
Direct Operation
Remote Control
The Auto PC adjustment function can be operated
directly by pressing the AUTO PC button on the remote
control or the AUTO PC ADJ. button on the side control.
AUTO PC button
Side Control
AUTO PC ADJ.
button
Menu Operation
Auto PC adj.
1
Press the MENU button to display the On-Screen Menu.
Use the Point buttons to move the red frame pointer
to the PC Adjust Menu icon.
2
Use the Point ! buttons to move the red frame pointer
to the AUTO PC adj. icon and then press the SELECT
button twice.
PC ADJUST MENU
PC Adjust Menu icon
Move the red frame pointer to the Auto PC
adj. and press the SELECT button twice.
To store the adjusted parameters.
The adjusted parameters from the Auto PC Adjustment can be stored in
the projector. Once the parameters are stored, the setting can be done
just by selecting Mode in PC SYSTEM Menu (p.34). See MANUAL PC
ADJUSTMENT on pages 36-37.
“Please wait...” appears while the Auto PC
adjustment is in process.
Note:
s&INE SYNC4OTAL DOTS (ORIZONTAL AND6ERTICAL POSITION OF
CERTAIN COMPUTERS CANNOT BE FULLY ADJUSTED WITH THE !UTO
0# !DJUSTMENT FUNCTION7HEN THE IMAGE IS NOT PROVIDED
PROPERLY WITH THIS OPERATION MANUAL ADJUSTMENTS ARE
REQUIREDPP
s!UTO 0# !DJUSTMENT CANNOT BE OPERATED IN $IGITAL 3IGNAL
)NPUTONTHE$6)TERMINALANDhPvhPvhIvhIv
hPvhIv ORhIv IS SELECTED ON THE 0# 3934%-
-ENU
s$EPENDING ON THE CONDITION OF SIGNALS AND THE TYPE AND
LENGTHOFCABLESTHESIGNALSMAYNOTBEPROPERLYVIEWED
LX1000 User Manual
020-000141-01 Rev. 1 (05-2009)
35
Computer Input
Manual PC Adjustment
Some computers employ special signal formats which may not be tuned by Multi-Scan system of this projector.
Manual PC Adjustment enables you to precisely adjust several parameters to match those special signal
formats. The projector has 10 independent memory areas to store those parameters manually adjusted. It
allows you to recall the setting for a specific computer.
Note: The PC Adjust Menu cannot be operated when the digital signal input on the DVI terminal is selected on
PC System Menu.
1
Press the MENU button to display the On-Screen Menu.
Use the Point buttons to move the red frame pointer
to the PC Adjust Menu icon.
2
Use the Point ! buttons to move the red frame pointer
to the desired item and then press the SELECT button
to display the adjustment dialog box. Use the Point buttons to adjust the setting value.
PC ADJUST MENU
PC Adjust Menu icon
Move the red frame pointer to the
desired item and press the SELECT
button.
Fine sync
Use the Point buttons to adjust the value, eliminating a
flicker from the image displayed (from 0 to 31).
Total dots
Status (Stored/Free) of the
Selected Mode.
Use the Point buttons to adjust the number of total dots in
one horizontal period to match your PC image.
Position H
Use the Point buttons to adjust the horizontal picture
position.
Position V
Selected Mode
Press the Point buttons to adjust
the value.
Press the SELECT button at this icon
to adjust “Clamp,” “Display area H,” or
“Display area V.”
Use the Point buttons to adjust the vertical picture position.
Current mode
Press the SELECT button to show H-sync freq. and V-sync freq.
of the connected computer.
Clamp
Current mode
Use the Point buttons to adjust the clamp level. When the
image has dark bars, try this adjustment.
Display area H
Use the Point buttons to adjust the horizontal area displayed
by this projector.
Display area V
Press the SELECT
button at Current
mode icon to show
the information of the
connected computer.
Press the SELECT button at this icon
to display the previous items.
Use the Point buttons to adjust the vertical area displayed
by this projector.
36
LX1000 User Manual
020-000141-01 Rev. 1 (05-2009)
Computer Input
Reset
To reset the adjusted data, select Reset and press the SELECT
button. A confirmation box appears and then select [Yes]. All
adjustments will return to their previous figures.
To clear the adjusted data.
Mode free
To clear the adjusted data, select Mode free and then press the
SELECT button. Move the red arrow pointer to the Mode that
you want to clear and then press the SELECT button.
Store
To store the adjusted data, select Store and then press the
SELECT button. Move the red arrow pointer to one of the Mode
1 to 10 in which you want to store, and then press the SELECT
button.
Close this dialog box.
Confirmation box appears
and then select [Yes].
Quit
Exit the PC Adjust Menu.
To store the adjusted data.
This Mode has stored parameters.
Vacant
Close this dialog box.
Values of “Total dots,” “Position
H,” “Position V,” “Display area
H,” and “Display area V.”
Confirmation box appears
and then select [Yes].
LX1000 User Manual
020-000141-01 Rev. 1 (05-2009)
37
Computer Input
Image Level Selection
Direct Operation
Press the IMAGE SEL. button on the remote control to
select the desired image level.
Remote Control
Standard
IMAGE SEL.
button
Real
Image1
s
s
s
Image 10
Menu Operation
1
Press the MENU button to display the On-Screen Menu.
Use the Point buttons to move the red frame pointer
to the Image Select Menu icon.
2
Use the Point ! buttons to move the red frame pointer
to the desired image level and then press the SELECT
button.
Standard
IMAGE SELECT MENU
Image Select Menu icon
Move the red frame pointer to the desired
level and press the SELECT button.
Normal picture level preset on the projector.
Real
Picture level with improved halftone for graphics.
IMAGE 1–10
User preset picture adjustment in the Image Adjust Menu.
(p. 47)
38
LX1000 User Manual
020-000141-01 Rev. 1 (05-2009)
Computer Input
Screen Size Adjustment
Select the desired screen size that conforms to the input signal source.
1
Press the MENU button to display the On-Screen Menu.
Use the Point buttons to move the red frame pointer
to the Screen Menu icon.
2
Use the Point ! buttons to move the red frame pointer
to the desired function and then press the SELECT
button.
SCREEN MENU
Screen Menu icon
Move the red frame pointer to the desired
function and press the SELECT button.
Normal
Provide the image at the normal computer aspect ratio of 4:3.
True
Provide the image in its original size. When the original image
size is larger than the screen size (1024 x 768), the projector
enters to the panning mode automatically. Use the Point ! buttons to pan the image. When adjusted, the arrows will
turn red. When reached to the correction limits, the arrows will
disappear.
Wide
Provide the image to fit the wide video aspect ratio (16:9) by
expanding the image width uniformly. This function can be used
to provide the squeezed video signal at 16:9.
Full screen
Note:
s4RUE&ULLSCREENAND$IGITALZOOMnCANNOT
BESELECTEDWHENNOSIGNALISDETECTEDINTHE
0#3YSTEM-ENUP
s4HE PROJECTOR CANNOT DISPLAY AND RESOLUTION
HIGHER THAN X )F YOUR COMPUTERS
SCREEN RESOLUTION IS HIGHER THAN X LOWER THE RESOLUTION BEFORE CONNECTING THE
PROJECTOR
s4HEIMAGEDATAOTHERTHAN8'!XIS
MODIFIEDTOFITTHESCREENSIZEININITIALMODE
s4HEPANNINGFUNCTIONMAYNOTOPERATEPROPERLY
IFTHESTORED-ODEINTHE0#!DJUST-ENUIS
USEDP
Provide the full screen image.
Custom
Adjust the screen scale and position manually with this
function.
Press the SELECT button at Custom and the “Custom” is
displayed on the screen for a few seconds. To display the
Aspect dialog box, press the SELECT button at Custom again
and then the Aspect dialog box appears.
Scale H/V .............. Adjust the Horizontal/Vertical screen scale.
H&V ...................... When set to “On,” the aspect ratio is
fixed. The “Scale V” appears dimmed and
becomes unavailable. Adjust “Scale H,”
then the screen scale is automatically
modified based on the aspect ratio.
Position H/V .......... Adjust the Horizontal/Vertical screen
position.
Common .............. Save the adjusted scale to all the inputs.
Press the SELECT button at Common to
display a confirmation box. To save the
scale, press the SELECT button at “Yes.”
When Custom is selected, the saved scale
is used.
Reset .................... Reset the all adjusted values. Press
the SELECT button at Reset to display
a confirmation box. To reset, press the
SELECT button at “Yes.”
LX1000 User Manual
020-000141-01 Rev. 1 (05-2009)
Press the SELECT button at Common or
Reset, to display a confirmation box.
Note:
s7HENNOSIGNALISDETECTEDh.ORMALvISSET
AUTOMATICALLYANDTHE!SPECTDIALOGBOXDISAPPEARS
s4HEADJUSTABLERANGEFOR3CALE(6AND0OSITION(6
ISLIMITEDDEPENDINGONTHEINPUTSIGNAL
39
Computer Input
Keystone
SCREEN MENU
This function is used to store or reset the keystone correction
when the Main On/Off Switch is pressed to Off or the AC
power cord is unplugged. Use the Point buttons to switch
between each option.
Store. . . Keep the keystone correction even when the Main
On/Off Switch is pressed to Off or the AC power
cord is unplugged.
Reset . . Release the keystone correction when the Main On/
Off Switch is pressed to Off or the AC power cord is
unplugged.
To correct keystone distortion, press the Select button. The
Keystone dialog box appears. Use the Point ! buttons to
correct keystone distortion. (p.30)
Move the red frame pointer to the desired
function and press the SELECT button.
Ceiling
Ceiling
When this function is set to “On,” the picture is top/bottom and
left/right reversed. This function is used to project the image
from a ceiling-mounted projector.
Rear
Rear
When this function is set to “On,” the picture is left/right
reversed. This function is used to project the image from the
rear of the screen.
Reset
This function returns all adjusted values to the factory default
settings. Press the SELECT button at Reset to display a
confirmation box. To reset, press the SELECT button at “Yes.”
Quit
Exit the Screen Size Adjustment Menu.
For zooming in and out the images
Note:
s4HEPANNINGFUNCTIONMAYNOTOPERATEPROPERLY
IFTHESTORED-ODEINTHE0#!DJUST-ENUIS
USEDP
s4HEMINIMUMCOMPRESSIONRATIOCANBELIMITED
DEPENDINGONTHEINPUTSIGNALORWHENTHE
+EYSTONEFUNCTIONISWORKINGORWHENTHE
CUSTOMISSELECTEDFORTHESCREENSIZE
s$IGITALZOOMnCANNOTBESELECTEDWHEN&ULL
SCREENOR4RUEISSELECTED
Digital zoom +
Select Digital zoom +. The On-Screen Menu disappears and
“D. zoom +” appears. Press the SELECT button to expand the
image size. Use the Point ! buttons to pan the image.
The Panning function can work only when the image is larger
than the screen size.
You can also enter the Digital zoom + mode by pressing the
D.ZOOM button on the remote control.
Digital zoom –
Select Digital zoom –. The On-Screen Menu disappears and
“D.zoom –” appears. Press the SELECT button to compress the
image size.
You can also enter the Digital zoom – mode by pressing the
D.ZOOM button on the remote control.
To exit the Digital Zoom +/– mode, press any button except the
D.ZOOM , SELECT, and Point buttons.
40
LX1000 User Manual
020-000141-01 Rev. 1 (05-2009)
Video Input
Video System Selection
1
Press the MENU button to display the On-Screen Menu.
Use the Point buttons to move the red frame pointer
to the AV System Menu icon.
2
Use the Point ! buttons to move the red arrow pointer
to the desired system and then press the SELECT button.
Video Jack or S-Video Jack
Auto
The projector automatically detects an incoming video system,
and adjusts itself to optimize its performance.
AV SYSTEM MENU (VIDEO OR S-VIDEO)
AV System Menu icon
The selected system is displayed
PAL/SECAM/NTSC/NTSC4.43/PAL-M/PAL-N
If the projector cannot reproduce proper video image, select
a specific broadcast signal format from among PAL, SECAM,
NTSC, NTSC 4.43, PAL-M, and PAL-N.
Move the pointer to the desired
system and press the SELECT button.
Y, Pb/Cb, Pr/Cr Jacks
Auto
The projector automatically detects an incoming video signal,
and adjusts itself to optimize its performance.
When the Video System is 1035i or 1080i, select the system
manually.
COMPONENT VIDEO SIGNAL FORMAT
If the projector cannot reproduce proper video image, select a
specific component video signal format from among 480i, 575i,
480p, 575p, 720p, 1035i, and 1080i.
AV SYSTEM MENU (COMPONENT VIDEO)
AV System Menu icon
The selected system is displayed.
Move the pointer to the desired
system and press the SELECT button.
Note:
s4HE!63YSTEMMENUCANNOTBESELECTEDWHENSELECTING
2'"3CART
LX1000 User Manual
020-000141-01 Rev. 1 (05-2009)
41
Video Input
Image Level Selection
Direct Operation
Press the IMAGE SEL. button on the remote control to
select the desired image level.
Remote Control
Standard
IMAGE SEL.
button
Cinema
Image1
s
s
s
Image 10
Menu Operation
1
Press the MENU button to display the On-Screen Menu.
Use the Point buttons to move the red frame pointer
to the Image Select Menu icon.
2
Use the Point ! buttons to move the red frame pointer
to the desired image level and then press the SELECT
button.
Standard
IMAGE SELECT MENU
Image Select Menu icon
Move the red frame pointer to the desired
level and press the SELECT button.
Normal picture level preset on the projector.
Cinema
Picture level adjusted with fine tone.
IMAGE 1–10
User preset picture adjustment in the Image Adjust Menu.
(p. 47)
42
LX1000 User Manual
020-000141-01 Rev. 1 (05-2009)
Video Input
Screen Size Adjustment
1
Press the MENU button to display the On-Screen Menu.
Use the Point buttons to move the red frame pointer
to the Screen Menu icon.
2
Use the Point ! buttons to move the red frame pointer
to the desired function and then press the SELECT
button.
SCREEN MENU
Screen Menu icon
Move the red frame pointer to the desired
function and press the SELECT button.
Normal
Provide the image at the normal video aspect ratio of 4:3.
Wide
Provide the image at the wide screen ratio of 16:9.
Note:
s7IDECANNOTBEOPERATEDWHENhPv
hIvORhIvISSELECTEDON!63YSTEM
-ENUP
Custom
Adjust the screen scale and position manually with this
function.
Press the SELECT button at Custom and the “Custom” is
displayed on the screen for a few seconds. To display the
Aspect dialog box, press the SELECT button at Custom again
and then the Aspect dialog box appears.
Scale H/V .............. Adjust the Horizontal/Vertical screen scale.
H&V ...................... When set to “On,” the aspect ratio is
fixed. The “Scale V” appears dimmed and
becomes unavailable. Adjust “Scale H,”
then the screen scale is automatically
modified based on the aspect ratio.
Position H/V .......... Adjust the Horizontal/Vertical screen
position.
Common .............. Save the adjusted scale to all the inputs.
Press the SELECT button at Common to
display a confirmation box. To save the
scale, press the SELECT button at “Yes.”
When Custom is selected, the saved scale
is used.
Reset .................... Reset the all adjusted values. Press
the SELECT button at Reset to display
a confirmation box. To reset, press the
SELECT button at “Yes.”
LX1000 User Manual
020-000141-01 Rev. 1 (05-2009)
Press the SELECT button at Common or
Reset, to display a confirmation box.
Note:
s7HENNOSIGNALISDETECTEDh.ORMALvISSET
AUTOMATICALLYANDTHE!SPECTDIALOGBOXDISAPPEARS
s4HEADJUSTABLERANGEFOR3CALE(6AND0OSITION(6
ISLIMITEDDEPENDINGONTHEINPUTSIGNAL
43
Video Input
Keystone
SCREEN MENU
This function is used to store or reset the keystone correction
when the Main On/Off Switch is pressed to Off or the AC
power cord is unplugged. Use the Point buttons to switch
between each option.
Store. . . Keep the keystone correction even when the Main
On/Off Switch is pressed to Off or the AC power
cord is unplugged.
Reset . . Release the keystone correction when the Main On/
Off Switch is pressed to Off or the AC power cord is
unplugged.
To correct keystone distortion, press the Select button. The
Keystone dialog box appears. Use the Point ! buttons to
correct keystone distortion. (p.30)
Move the red frame pointer to a function and
press the SELECT button.
Ceiling
Ceiling
When this function is set to “On,” the picture is top/bottom and
left/right reversed. This function is used to project the image
from a ceiling-mounted projector.
Rear
Rear
When this function is set to “On,” the picture is left/right
reversed. This function is used to project the image from the
rear of the screen.
Reset
This function returns all adjusted values to the factory default
settings. Press the SELECT button at Reset to display a
confirmation box. To reset, press the SELECT button at “Yes.”
Quit
Exit the Screen Size Adjustment Menu.
44
LX1000 User Manual
020-000141-01 Rev. 1 (05-2009)
Picture Image
Image Adjustment
1
Press the MENU button to display the On-Screen Menu.
Use the Point buttons to move the red frame pointer
to the Image Adjust Menu icon.
2
Use the Point ! buttons to move the red frame pointer
to the desired item and then press the SELECT button
to display the adjustment dialog box. Use the Point buttons to adjust the setting value.
IMAGE ADJUST MENU
Image Adjust Menu icon
Move the red frame pointer to the desired
item and then press SELECT button.
Contrast
Press the Point button to decrease contrast; press the Point
button to increase the contrast (from 0 to 63).
Brightness
Press the Point button to decrease the brightness; press the
Point button to increase the brightness (from 0 to 63).
Color =
Press the Point button to decrease the intensity of the color;
press the Point button to increase the intensity of the color
(from 0 to 63).
Tint =
Press the Point buttons to adjust the tint value to obtain
proper color balance (from 0 to 63).
Color Management
The Color Management function can be used to adjust the
LEVEL, PHASE, and GAMMA of the selected display colors
(except for black, white, and gray) on the screen and replace
these colors with other colors if required.
You can store up to eight (8) color management data.
1
2
3
Use the Point ! buttons to move the red frame pointer
to Color Management, and then press the SELECT
button. The projected image freezes, and the COLOR
MANAGEMENT POINTER appears.
Use the Point buttons to adjust the
setting value.
POINTER MODE
Use the Point ! buttons to move the pointer to the
spot where you want to adjust the color and then press
the SELECT button. The COLOR SELECTION window
appears, and the color in the center of the pointer is
selected and you can adjust the color.
Use the Point ! buttons to adjust the LEVEL and
PHASE of the color, and then press the SELECT button
to confirm the setting. Then use the Point ! buttons to
adjust the GAMMA for the color and press the SELECT
button to accept the setting. After adjusting, press the
SELECT button to go to the COLOR MANAGEMENT LIST.
COLOR SELECTION MODE
COLOR MANAGEMENT
POINTER
Note:
=$ISPLAYEDINGRAYOUTINTHECOMPUTER)NPUT
s4INTCANNOTBESELECTEDWHENTHEVIDEOSYSTEMIS
0!,3%#!-0!,-OR0!,.P
s#OLORMANAGEMENTISDISPLAYEDINGRAYOUTWHEN
THEREISNOSIGNAL
LIST
Go to the COLOR MANAGEMENT LIST.
LX1000 User Manual
020-000141-01 Rev. 1 (05-2009)
45
Picture Image
COLOR SELECTION MODE (continued)
COLOR M.
Return to the COLOR MANAGEMENT POINTER. (If you
press the MENU button on the side control or the remote
control, it returns to the COLOR MANAGEMENT POINTER
and you will need to reselect and readjust the color.)
COLOR SELECTION MODE
Level and phase
adjustment palette.
Gamma
adjustment palette.
MENU
Return to the IMAGE ADJUST Menu. Any settings that
have been changed will not be stored. To store the
changed settings, be sure to select “LIST” and go to the
COLOR MANAGEMENT LIST.
4
In the COLOR MANAGEMENT LIST, the adjusted color
data are checkmarked. You can decide whether or not to
apply the adjusted color data in the list to the projected
image (see below).
LIST
COLOR M.
MENU
LIST MODE
LIST MODE
Clear the check mark if you do not want to apply the
adjusted color data; select the check mark and then press
the SELECT button. The check mark disappears.
COLOR PALETTE
DEL
COLOR PALETTE
Return to the COLOR SELECTION mode so that you can
readjust the setting for the color in that line. (This option is
not available if the check mark is cleared.)
DEL
Select the DEL box if you want to delete the adjusted
data. Press the SELECT button and a confirmation box
appears and then select [Yes].
ALL DEL
Delete all the data in the list. Press the SELECT button and
a confirmation box appears and then select [Yes].
MENU
The same function as stated above.
ALL DEL
MENU
COLOR M.
COLOR M.
The same function as stated above.
Auto picture control
Use the Point buttons to select the desired Auto picture
control position (Off, L1 or L2).
Off . . . . Auto picture control OFF position.
L1 . . . . . Auto picture control LEVEL 1 position.
L2 . . . . . Auto picture control LEVEL 2 position.
Color temp.
Use the Point buttons to select the desired Color temp.
level (XLow, Low, Mid, or High).
46
LX1000 User Manual
020-000141-01 Rev. 1 (05-2009)
Picture Image
White balance (Red/Green/Blue)
Press the Point button to lighten red/green/blue tone; press the
Point button to deepen red/green/blue tone (from 0 to 63).
Offset (Red/Green/Blue)
Press the Point button to lighten red/green/blue tone of the
black level of an image; press the Point button to deepen red/
green/blue tone of the black level of an image (from 0 to 63).
Sharpness
Press the Point button to decrease the sharpness of the image;
press the Point button to increase the sharpness of the image
(from 0 to 31).
Press the SELECT button at this icon to
display other items.
Gamma
Use the Point buttons to adjust the gamma value to obtain a
better balance of contrast (from 0 to 15).
Press the SELECT button at this
icon to display the previous items.
Noise reduction =
Noise interference on the screen can be reduced. Press the Point
buttons to change the noise reduction mode.
Off . . . . Noise reduction mode is “Off”
On . . . . Noise reduction mode is “On”
Press the Point buttons to
adjust the setting value.
Progressive =
An interlaced video signal can be displayed in progressive mode.
Press the Point buttons to change the progressive scan mode.
Off . . . . Progressive scan mode is “Off.”
On . . . . Progressive scan mode is “On.”
Film . . . For watching a film. With this function, the projector
reproduces pictures faithful to the original film quality.
Note:
s0ICTUREISDISTORTEDATTHEMOMENTOF/N/FF&ILMSWITCHING
Reset
To reset the adjusted data, select Reset and press the SELECT
button. A confirmation box appears and then select [Yes]. All
adjustments will return to their previous figures.
Store
To store the adjusted data, move the red frame pointer to the
Store icon and press the SELECT button. The Image Level Menu
appears. Move the red arrow pointer to any of the Image 1 to
10 in which you want to set and press the SELECT button. A
confirmation box appears and then select [Yes].
Quit
Image Level Menu
Move the red frame pointer to an
image item to be set and then press
the SELECT button.
Exit the Image Adjust Menu.
Note:
=$ISPLAYEDINGRAYOUTINTHECOMPUTER)NPUT
s7HENTHE7HITEBALANCE2ED'REENOR"LUEISADJUSTEDTHE
#OLORTEMPLEVELWILLCHANGETOh!DJv
s4HE&ILMMODEINTHE0ROGRESSIVEFUNCTIONCANNOTBESELECTED
WHENTHEVIDEOSIGNALFORMATISIORI
s0ROGRESSIVE CANNOT BE SELECTED WHEN hPv hPv OR
hPvISSELECTEDP
LX1000 User Manual
020-000141-01 Rev. 1 (05-2009)
Store icon
Press the SELECT button at this
icon to store the adjustment.
47
Setting
Setting
This projector has a Setting menu that allows you to set up other various functions.
1
Press the MENU button to display the On-Screen Menu.
Use the Point buttons to move the red frame pointer
to the Setting Menu icon.
2
Use the Point ! buttons to move the red frame pointer
to the desired item and then press the SELECT button.
The Setting dialog box appears.
SETTING MENU (Language)
Setting Menu icon
Set the red frame pointer
to the item and press the
SELECT button.
Language
The language used in the On-Screen Menu is available in
English, German, French, Italian, Spanish, Portuguese, Dutch,
Swedish, Russian, Chinese, Korean, or Japanese.
Menu
This function allows you to adjust the position of the On-Screen
Display and the value adjustment bar in the Picture Image
Adjustment Menu.
Position
Press the SELECT button at
Language, then the Language
Menu appears.
This function is used to adjust the On-Screen Menu display
position. Press the SELECT button and the adjustment
screen appears (arrows appear). Use the Point ! buttons to adjust the position. After making the adjustment,
press the SELECT button to return to the Menu screen.
Simple menu
When this function is set to “On,” the value adjustment bar in
the Picture Image Adjustment Menu appears on the screen.
Display
This function decides whether to display On-Screen Displays.
On . . . . . . . . . . . . Show all the On-Screen Displays. Use this
function when you want to project images
after the lamp becomes bright enough. The
factory default setting is in this option.
Countdown Off. . . Show the input image instead of the
countdown when turning on the projector.
Use this function when you want to project
the image as early as possible even when
the lamp is not bright enough.
Off . . . . . . . . . . . . Hide the On-Screen Displays except:
L On-Screen Menu
L “Power off?” (p.24)
L Color management operation screen
(pp.45-46)
L “No signal” for Power management (p.52)
L P-TIMER (p.30)
L ”Please wait....” for Auto PC adjustment
(p.35)
L Arrows for panning mode
Menu
Set the red frame pointer
to the item and press the
SELECT button.
Background
The selected background screen will be displayed when no
input signal is detected.
Blue . . . Blue colored background.
User . . . The image you captured.
Black. . . Black colored background.
48
Note:
sh5SERvCANNOTBESELECTEDWHENTHEIMAGEISNOT
CAPTURED
LX1000 User Manual
020-000141-01 Rev. 1 (05-2009)
Setting
Logo
Logo
This function allows you to customize the screen logo with Logo
select, Capture, and Logo PIN code lock functions.
Note:
s7HENh/NvISSELECTEDINTHE,OGO0).CODELOCKFUNCTION,OGO
SELECTAND#APTUREFUNCTIONSCANNOTBESELECTED
Logo select
This function decides on the starting-up display from
among the following options.
User . . . Show the image you captured.
Default . Show the factory-set logo.
Off . . . . Show the countdown display only.
Set the red frame pointer
to the item and press the
SELECT button.
Capture
This function enables you to capture an image being
projected to use it for a starting-up display or interval of
presentations.
Select Capture and press the SELECT button.
A confirmation box appears and select [Yes] to capture the
projected image.
Capture
After capturing the projected image, go to the Logo select
function and set it to “User”. Then the captured image will
be displayed the next time you turn on the projector.
To cancel the Capture function, select [No].
Note:
s"EFORECAPTURINGANIMAGESELECTh3TANDARDvINTHE)MAGE
3ELECT-ENUTOCAPTUREAPROPERIMAGEPP
s!SIGNALFROMACOMPUTERCANBECAPTUREDUPTO8'!
X
s#ERTAINSIGNALSMAYNOTBECAPTUREDPROPERLY
s7HENCAPTURINGTHEIMAGETHATHASBEENADJUSTEDBYTHE
+EYSTONEFUNCTIONTHEADJUSTEDDATAISAUTOMATICALLYRESET
ANDTHEPROJECTORCAPTURESANIMAGEWITHOUTKEYSTONE
CORRECTION
s7 HEN STARTING TO CAPTURE A NEW IMAGE THE PREVIOUSLY
STOREDIMAGEISCLEAREDEVENIFYOUCANCELTHECAPTURING
s/NCE YOU EXIT THE ,OGO -ENU AFTER SETTING THE ,OGO LOCK
TO /N YOU ARE REQUIRED TO ENTER THE 0). CODE EVERY
ATTEMPTINGTOCHANGETHE,OGOSETTING
sh5SERvCANNOTBESELECTEDWHENTHEIMAGEISNOTCAPTURED
LX1000 User Manual
020-000141-01 Rev. 1 (05-2009)
Set the pointer (red
arrow) to the item and
press the SELECT button.
Select [Yes]
to capture
the projected
image.
Select [Yes] to stop
capturing.
49
Setting
Logo PIN code lock
Logo PIN Code Lock
This function prevents an unauthorized person from changing
the screen logo.
Off . . . . The screen logo can be changed freely from the
Logo Menu.
On . . . . The screen logo cannot be changed without a
Logo PIN code.
If you want to change the Logo PIN code lock setting, press
the SELECT button and the Logo PIN code dialog box appears.
Enter a Logo PIN code by following the steps below. The initial
Logo PIN code is set to “4321” at the factory.
Enter a Logo PIN code
Enter a Logo PIN code
Use the Point ! buttons on the side control or on
the remote control to enter a number. Press the Point
button to fix the number and move the red frame
pointer to the next box. The number changes to “3.”
Repeat this step to complete entering a four-digit
number. After entering the four-digit number, move the
pointer to “Set.” Press the SELECT button so that you
can change the Logo PIN code lock setting.
After a correct Logo PIN code is
entered, the following dialog box
appears.
Change the Logo PIN code lock setting
If you fixed an incorrect number, use the Point button
to move the pointer to the number you want to correct,
and then enter the correct number.
Use the Point buttons to switch On/Off,
If you entered an incorrect Logo PIN code, “Logo
PIN code” and the number (3333) will turn red for a
moment. Enter the correct PIN code all over again.
Change the Logo PIN code
Change the Logo PIN code lock setting
Use the Point buttons to switch On/Off, and then press
the Point
button to move the pointer to “Quit.” Press the
SELECT button to close the dialog box.
Change the Logo PIN code
Logo PIN code can be changed to your desired four-digit
number. Press the Point
button to select “Logo PIN code
change” and then press the SELECT button. The New Logo
PIN code input dialog box appears. Set a new Logo PIN code.
Be sure to note the new Logo PIN code and keep it on hand.
If you lost the number, you could no longer change the Logo
PIN code setting. For details on PIN code setting, refer to “PIN
code lock” on pages 53–54.
50
CAUTION:
WHEN YOU HAVE CHANGED THE LOGO PIN
CODE, WRITE DOWN THE NEW PIN CODE
IN COLUMN OF THE LOGO PIN CODE NO.
MEMO ON PAGE 80, AND KEEP IT SECURELY.
SHOULD THE LOGO PIN CODE BE LOST OR
FORGOTTEN, THE LOGO PIN CODE SETTING
CAN NO LONGER BE CHANGED.
LX1000 User Manual
020-000141-01 Rev. 1 (05-2009)
Setting
Lamp mode
This Projector is equipped with 2 Projection Lamps and the
number of using lamps can be switched to 2 lamps or 1 lamp.
Using 1 lamp maintains the life of Projection Lamps.
Note:
To change over Lamp Mode
Set "2 lamps mode" or "1 lamp mode" by pressing the Point buttons. When the Lamp Mode is switched from "2 lamps mode"
to "1 lamp mode", the image becomes a little darker. When the
Lamp Mode is switched from "1 lamp mode" to "2 lamps mode",
the image becomes brighter gradually.
s7HEN NEITHER OF THE TWO LAMPS IS LIGHTED THE
PROJECTORWILLSHUTDOWNAUTOMATICALLY
s7HEN EITHER OF THE TWO LAMPS DOES NOT LIGHT UP
THE ,!-0 2%0,!#% INDICATOR BLINKS ORANGE
ANDTHEPROJECTORWILLLIGHTTHEOTHERAUTOMATICALLY
s! FTER CHANGING THE ,AMP -ODE IT CANNOT BE
SWITCHEDAGAINFORSECONDS
Lamp control
This function allows you to change the brightness of the screen.
Auto . . . . . Brightness according to the input signal.
Normal . . . Normal brightness.
Eco . . . . . . Lower brightness. Lower brightness reduces
the lamp power consumption and extends the
lamp life.
Filter control
You can replace the filter with this function. Press the SELECT
button at Filter control to display a confirmation box. To replace,
press the SELECT button at “YES” and the electrically operated
filter starts to scroll.
You can also replace the filter by using the remote control
(p. 30).
Note:
s&ILTERREPLACEMENTICONANDh0LEASEWAITv
MESSAGEAPPEARONTHESCREENWHENTHEFILTERIS
BEINGSCROLLED
s4HEFILTERCANNOTBEREWOUND
s7HEN THE FILTER IS REPLACED THE TOTAL ACCUMULATED
TIMEOFTHEFILTERUSEISAUTOMATICALLYSETTO
Fan control
Choose the running speed of cooling fans from the following
options.
Normal ....... Normal speed.
Max ........... Faster than the normal speed.
LX1000 User Manual
020-000141-01 Rev. 1 (05-2009)
51
Setting
Remote control
The eight different remote control codes (Code 1–Code 8) are
assigned to the projector; the factory-set, initial code (Code 1)
and the other seven codes (Code 2 to Code 8).
Remote control
The same code should be set on both the projector and the
remote control. For example, operating the projector in “Code
7”, the remote control code also must be switched to “Code 7”.
To change the code for the projector;
Select a remote control code in this Setting Menu.
To change the code for the remote control;
Check the Reset Switch to "Use position" in the compartment
lid on the back of the remote control.
And then while holding down the MENU button, press and
release the IMAGE ADJ. button the number of corresponding
times you would like to set the number of the remote control
code for the projector. (See page 16)
When pressing the SELECT button at
Remote control, the Remote control
code menu appears.
To reset the code for the remote control;
Slide the Reset Switch to "Reset position" in the compartment
lid on back of the remote control.
RC sensor
Select a location of the infrared remote receiver of the remote
control. See “Remote Control Receivers and Operating Range”
on page 15 for details.
Both ......... Activate both the front and back receiver.
Front ........ Activate only the front receiver.
Back ......... Activate only the back receiver.
Power management
For reducing power consumption as well as maintaining
the lamp life, the Power management function turns off the
projection lamp when the projector is not used for a certain
period.
If the input signal is interrupted and no button is pressed for
more than 30 seconds, the timer display with “No signal”
appears. It starts the countdown until the lamp is turned off. The
countdown time can be set between 1 and 30 minutes.
Use the Point buttons to set the countdown timer.
Select one of the following options:
Ready . . . . When the lamp has been fully cooled down, the
READY indicator starts blinking. In this condition,
the projection lamp is turned on if the input
signal is reconnected or any button on the side
control or remote control is pressed .
Shutdown . . When the lamp has been fully cooled down, the
power is turned off.
Off . . . . . . . Power Management function is off.
Note:
Power management
Time left before the lamp is off
Press the SELECT button at Power
management and the dialog box
appears. Use the Point buttons to choose one of the three
options.
Press the Point
button to select
the timer, and then use the Point buttons to set the timer
s&ACTORYDEFAULTISh2EADYMINv
s7HENTHESHUTTERISCLOSEDWHILETHE0OWERMANAGEMENTFUNCTION
ISWORKINGTHE0OWERMANAGEMENTFUNCTIONISRELEASED
52
LX1000 User Manual
020-000141-01 Rev. 1 (05-2009)
Setting
On start
When this function is set to “On,” the projector will be
automatically turned on just by connecting the AC power cord to
the wall outlet.
Note:
s -AKESURETHATTHE-!)././&&SWITCHIS/.OTHERWISETHE
/NSTARTFUNCTIONDOESNOTWORK
s "ESURETOTURNOFFTHEPROJECTORPROPERLYSEEh4URNING/FFTHE
0ROJECTORvONPAGE)FTHEPROJECTORISTURNEDOFFINTHEINCORRECT
SEQUENCETHE/NSTARTFUNCTIONDOESNOTWORKPROPERLY
Security
Security
Key lock
This function locks the side control and remote control buttons
to prevent operation by unauthorized persons.
. . . . . Unlocked.
. . . . . Lock the side control buttons.
To unlock, use the remote control.
. . . . . Lock the remote control buttons.
To unlock, use the side control.
If the side control accidentally becomes locked and you
do not have the remote control nearby and unable to
operate the projector, contact the service station.
Set the red frame
pointer to the item
and press the
SELECT button.
Key lock
Select Key lock and
this box appears.
Choose one of the
alternatives with the
Point ! buttons
and select [Yes] to
activate it.
PIN code lock
This function prevents the projector from being operated
by unauthorized persons and provides the following setting
options for security.
Off . . . . Unlocked.
On1 . . . Enter the PIN code every time turning on the
projector.
On2 . . . Enter the PIN code to operate the projector once
the Main On/Off Switch is pressed to Off or the
power cord is unplugged ; as long as the AC power
cord is connected and the Main On/Off Switch
is pressed to ON, the projector can be operated
without a PIN code.
Whenever you change the PIN code lock setting or the PIN
code (the four-digit number), you are required to enter the PIN
code. “1234” is set as the initial PIN code at the factory.
If you want to change the PIN code lock setting, press the
SELECT button and the PIN code dialog box appears. Enter a
PIN code by following the steps on the next page.
LX1000 User Manual
020-000141-01 Rev. 1 (05-2009)
PIN code lock
When the projector
is locked with a PIN
code, the PIN code
lock symbol appears
on the menu bar.
53
Setting
Enter a PIN code
Enter a PIN code
Use the Point ! buttons on the side control or on
the remote control to enter a number. Press the
Point button to fix the number and move the red
frame pointer to the next box. The number changes
to “3.” Repeat this step to complete entering a fourdigit number. After entering the four-digit number,
move the pointer to “Set.” Press the SELECT button
so that you can change the PIN code lock setting .
After a correct Logo PIN code is
entered, the following dialog box
appears.
If you fixed an incorrect number, use the Point button to move the pointer to the number you want
to correct, and then enter the correct number.
Change the PIN code lock setting
Use the Point buttons to switch
between the options.
If you entered an incorrect PIN code, “PIN code” and
the number (3333) will turn red for a moment. Enter
the correct PIN code all over again.
Change the PIN Code Lock setting
Use the Point button to select Off, On1, or On2 and then
move the pointer to “Quit” with the Point
button. Press the
SELECT button to close the dialog box.
Change the PIN Code
The PIN code can be changed to your desired four-digit
number. Press the Point
buttons to select “PIN code
change” and press the SELECT button. The New PIN code
input dialog box appears. Set a new PIN code.
Change the PIN code
CAUTION:
WHEN YOU HAVE CHANGED THE PIN CODE, WRITE
DOWN A NEW PIN CODE IN COLUMN OF THE PIN CODE
NO. MEMO ON PAGE 80, AND KEEP IT SECURELY. IF
YOU FORGET YOUR PIN CODE, THE PROJECTOR CAN NO
LONGER BE STARTED.
Projector ID
This feature allows users to set serial communication
configuration (Projector ID) when several projectors are
connected via the RS-232C terminal (serial port) of the
projector.
Use the Point buttons to adjust the Projector ID.
LProjector ID ... 1 - 999. (Factory default setting : Projector ID
54
1)
LX1000 User Manual
020-000141-01 Rev. 1 (05-2009)
Setting
Shutter
Shutter function is available to block out light to the
screen, so that the screen can be used for the other
presenters.
Protection
Prohibits the shutter operation from the remote control
and the projector's side control.
Remote control
Projector . . .
Selecting "On" prohibits the shutter
operation from the remote control.
Selecting "On" prohibits the shutter
operation from the side control.
It is possible to prohibit the shutter operation from both of
the remote control and the side control.
Management
The Shutter Management function turns off the projection
lamp when the projector is left with the shutter closed and
the set time has passed away. The count-down time can be
set between 5 and 180 minutes. When the count-down time
has elapsed, the shutter will be opened up automatically and
the lamp will be turned off to cool itself down. The SHUTTER
indicator is blinking blue during this cooling-off period. When
the lamp has been fully cooled down, the READY indicator
turns green lighting and the SHUTTER indicator keeps
blinking. Should the ON / STAND-BY button be pressed in
this condition, the projection lamp will be turned on and the
SHUTTER indicator turns off.
Note:
s4HE&ACTORYDEFAULTVALUEISSETTOMINUTESFOR
THECOUNTDOWNTIME
s4 HE 3HUTTER -ANAGEMENT FUNCTION CANNOT BE
HALTED
Lamp counter
This function is used to reset the lamp counter.
When the lamp life reaches a recommended lamp replacement
time, the time shown in the dialog box turns red and the Lamp
replacement icon appears on the screen, indicating that the end
of lamp life is approaching.
This icon appears on the screen when the end of lamp life is
approaching.
Note:
s4HISICONALSOAPPEARSATTURNINGONANDSELECTING
INPUTSOURCE
When replacing the projection lamp, reset the lamp counter.
See “Resetting the Lamp Counter” on page 62.
Note:
s4HE,AMPREPLACEMENTICONWILLNOTAPPEARWHENTHE
$ISPLAYFUNCTIONISSETTOh/FFvPORDURINGh&REEZEv
P
LX1000 User Manual
020-000141-01 Rev. 1 (05-2009)
55
Setting
Filter counter
Filter counter
This function is used to set a time for the filter replacement.
Use the Point ! buttons to move the red frame pointer to Filter
counter and then press the SELECT button. A dialog box appears
showing the Used time option and the Scrolls remaining option.
Used Time . . . . . . Show the total accumulated time of the
filter use, timer setting option and the Reset
options. When the projector reaches a time
set in the timer setting, the Filter replacement
icon (Fig. 1) appears on the screen and the
total accumulated time turns red, indicating
that the filter replacement is necessary. If
the filter is out of scroll and the projector
reaches a time set in the timer setting, Fig.
2 appears on the screen, indicating that the
filter cartridge replacement is necessary.
Scrolls remaining . . Show the scroll counter and the Reset
options. When the filter scroll is counted
down to 1 (Scroll counter on the screen is
showing “0 scroll(s)” , the last scroll icon
(Fig. 3) appears on the screen. When the
filter scroll is counted down to 0, the Filter
cartridge replacement icon (Fig. 4) appears
on the screen and the WARNING FILTER
indicator lights orange, indicating that the
filter cartridge replacement is necessary.
To set a timer, press the SELECT button on Used time option.
Move the red arrow pointer to the timer setting option and use
the Point buttons to select from (Off/ 400H/700H/1000H)
depending on the use environment.
When replacing the Filter cartridge, reset the Filter counter and the
Scroll counter (p.59).
Note:
s$ONOTRESETTHE&ILTERCOUNTERANDTHE3CROLLCOUNTER
WITHOUTREPLACINGTHE&ILTERCARTRIDGE"ESURETORESETTHE
&ILTERCOUNTERANDTHE3CROLLCOUNTERONLYAFTERREPLACING
THE&ILTERCARTRIDGE
s4IMERSETTINGNOTIFIESTHATTHEFILTERNEEDSREPLACEMENT4O
REPLACETHEFILTERUSETHEFILTERCONTROLFUNCTIONP
Test pattern
Various test pattern are available for use when setting up the
projector.
Set the red frame pointer
to the item and press the
SELECT button.
Use the Point buttons
to set the timer. Select from
(Off/ 400H/700H/1000H)
depending on the use
environment
Fig.1 Filter replacement icon
Filter replacement icon appears on the screen
at a set time.
Fig.2
Fig.3 Last scroll icon
Last scroll icon appears on the screen when
the filter is down to the last scroll.
Fig.4 Filter cartridge replacement icon
Filter cartridge replacement icon appears on
the screen when the filter scroll is counted
down to 0 scroll.
Note:
s&IG&IG&IGOR&IGWILLAPPEARATTURNINGON
ANDSELECTINGINPUTSOURCE
s&IG &IG &IG OR &IG WILL NOT APPEAR
WHENTHE$ISPLAYFUNCTIONISSETTOh/FFvP
ORDURINGh&REEZEvP
Factory default
Set the red frame pointer
to the item and press the
SELECT button.
Select Factory default and this box
appears. Select [Yes], and the next
box appears.
Factory default
This function returns all setting values except for the user logo,
PIN code lock, Logo PIN code lock, lamp counter, filter counter
and filter timer to the factory default settings.
Quit
Exit the Setting Menu.
56
Select [Yes] to
activate it.
LX1000 User Manual
020-000141-01 Rev. 1 (05-2009)
Maintenance and Care
Filter Instructions
Filter prevents dust from accumulating on the optical elements inside the projector. Should the filter becomes
clogged with dust particles, it will reduce cooling fans’ effectiveness and may result in internal heat buildup
and adversely affect the life of the projector. This projector has an electrically operated filter which helps you to
replace the filter easily. The projector monitors the condition of the filter at all time and replaces a filter with a
new one automatically when it detects the clogging.
If the projector reaches a time set in the timer setting (p.
56), a Filter replacement icon (Fig.1) appears on the screen
and the WARNING FILTER indicator on the top panel lights
up (p.74). When you see this icon, replace the filter as soon
as possible (pp.30, 51). If the filter is out of scroll and the
projector reaches a time set in the timer setting, Fig. 2
appears on the screen, indicating that the filter cartridge
replacement is necessary.
Fig.1 Filter replacement icon
When the filter scroll is counted down to 1, the Last scroll
icon (Fig.3) appears on the screen, indicating that there is
one scroll left in the filter cartridge (p.56).
Fig.2
If the projector detects that the filter is clogged and no scroll
is left in the filter cartridge, a Filter cartridge replacement
icon (Fig. 4) appears on the screen and the WARNING
FILTER indicator on the top panel lights up (p.74). When you
see this icon, replace the filter cartridge (p.58) and reset the
Filter counter (p.59) and the Scroll counter (p.59).
Fig.3 Last scroll icon
When the filter is being scrolled by the remote control (p.30)
or the Filter control function in the setting menu (p.51), a
Filter replacement icon and “Please wait...” message (Fig.5)
appear on the screen and the WARNING FILTER indicator
blinks slow (approx. 2 seconds ON, 2 seconds OFF) (p.72).
The WARNING FILTER indicator blinks fast when the
projector detects an abnormal condition, the filter cartridge
is not installed properly, or the filter scroll is not working
properly (p.74).
Fig.4 Filter cartridge replacement icon
Fig.5 Filter replacement icon and
“Please wait...” message.
Note:
s&IG&IG&IGOR&IGWILLNOTAPPEARWHENTHE$ISPLAY
FUNCTIONISSETTOh/FFvPORDURINGh&REEZEvP
s4HEFILTERCANNOTBEREWOUND
s4HEFILTERCANBESCROLLEDTIMESSINCETHEFILTERCARTRIDGEHAS
SCROLLS
s4HEFILTERCARTRIDGEISDISPOSABLE$ONOTCLEANANDREUSETHE
FILTERCARTRIDGE
s$ONOTEXPOSETHEFILTERCARTRIDGETOWATERORLIQUIDORITMAY
CAUSEABREAKDOWN
s2EPLACETHEFILTERCARTRIDGEAFTERALLTHESCROLLISUSEDUP)FYOU
REPLACETHEFILTERCARTRIDGEWHENTHEREARESOMESCROLLSLEFTIN
THEFILTERCARTRIDGETHEFILTERCOUNTERANDTHESCROLLCOUNTERDO
NOTRECOGNIZETHECORRECTNUMBEROFREMAININGSCROLLSANDTHE
RESETFUNCTIONCANNOTWORKPROPERLY)TMAYCAUSEABREAKDOWN
s4HEUSEDPARTOFTHEFILTERCANBESEENONTHEEDGEOFTHE&ILTER
CARTRIDGEAFTERSCROLLINGTHEFILTERBUTTHEREISNOPROBLEMFORTHE
USEOFTHEPROJECTOR
LX1000 User Manual
020-000141-01 Rev. 1 (05-2009)
s$ONOTUSETHEFILTERCARTRIDGEWITHOTHERPROJECTOR4HEFILTER
COUNTERANDTHESCROLLCOUNTERDONOTRECOGNIZETHECORRECT
NUMBEROFREMAININGSCROLLSOFTHEUSEDFILTERCARTRIDGEANDTHE
RESETFUNCTIONCANNOTWORKPROPERLY)TMAYCAUSEABREAKDOWN
s-AKESURETHATTHEPROJECTIONLAMPSARETURNEDOFFWHENYOU
AREREPLACINGTHEFILTERCARTRIDGE)FYOUREPLACETHEFILTERCARTRIDGE
WHENTHEPROJECTIONLAMPSARETURNEDONTHEPROJECTORWILLBE
SHUTDOWNAUTOMATICALLYFORSAFETYPURPOSES
s$ONOTFORGETTORESETTHEFILTERCOUNTERANDTHESCROLLCOUNTERIN
THESETTINGMENUAFTERREPLACINGTHEFILTERCARTRIDGE)FYOUFORGET
TORESETTHEFILTERCOUNTERANDTHESCROLLCOUNTERTHEPROJECTOR
CANNOTRECOGNIZETHECORRECTNUMBEROFREMAININGSCROLLSANDIT
MAYCAUSEABREAKDOWN
s7HENTHEPROJECTORISKEPTUSEDFORMINUTESWITHOUTGETTING
THEFILTERCARTRIDGEREPLACEDAFTERTHE&IGAPPEARSONTHESCREEN
THEPROJECTORISTURNEDOFFAUTOMATICALLYTOPREVENTTHEDAMAGEOF
OPTICALCOMPONENTS
57
Maintenance and Care
Replacing the Filter Cartridge
1
Turn off the projector, press the Main On/Off Switch to
Off and unplug the AC power cord from the AC outlet.
2
First, clean up the dust on the projector and around the
air vents.
3
Slide and open the Filter cover. (See the right figure.)
4
Pull out the filter cartridge by holding the finger grip.
5
Put the new one back into the position and close
the filter cover. Make sure that the filter cartridge is
properly and fully inserted.
6
Connect the AC power cord to the projector and turn
on the projector.
7
Reset the filter counter and the scroll counter (p.59).
Filter cover
Filter cartridge
CAUTION
Make sure the filter cartridge is inserted in the
projector. If the filter cartridge is not inserted, the
projector cannot be turned on.
Do not put anything into the air vents. Doing so
may result in malfunction of the projector.
RECOMMENDATION
We recommend avoiding dusty/smoky environments when
operating the projector. Usage in these environments may
cause a poor image quality.
When using the projector under dusty or smoky conditions,
dust may accumulate on a lens, liquid crystal panels, or optical
elements inside the projector. Such condition may degrade the
quality of the projected image.
When the symptoms above are noticed, contact your authorized
dealer or service station for proper cleaning.
ORDER REPLACEMENT FILTER CARTRIDGE
Replacement filter cartridge can be ordered through your
dealer. When ordering, give the following information to the
dealer.
L
Model No. of your projector
LX1000
L Replacement Filter Cartridge
Service Parts Code: 003-002003-01
58
LX1000 User Manual
020-000141-01 Rev. 1 (05-2009)
Maintenance and Care
Resetting the Filter Counter
Filter counter
Be sure to reset the Filter counter after replacing the filter
cartridge.
1
Press the MENU button to display the On-Screen Menu. Use
the Point buttons to move the red frame pointer to the
Setting Menu icon.
2
Use the Point ! buttons to move the red frame pointer to
Filter counter and then press the SELECT button.
A dialog box appears showing the Used time option and the
Scrolls remaining option. Use the Point ! buttons to select
Used time.
3
Used time shows the total accumulated time of the filter
use, a timer setting option, and the Reset option. Select
Reset and the “Filter counter Reset?” appears. Select [Yes]
to continue.
4
Select “Used time” and the
dialogue box below appears.
Select Reset and the “Filter
counter Reset?” appears.
Another confirmation dialog box appears, select [Yes] to
reset the Filter counter.
Select [Yes],
then another
confirmation
box appears.
Select [Yes] again to reset
the Filter counter.
Resetting the Scroll Counter
Be sure to reset the Scroll counter after replacing the filter
cartridge.
1
Press the MENU button to display the On-Screen Menu. Use
the Point buttons to move the red frame pointer to the
Setting Menu icon.
2
Use the Point ! buttons to move the red frame pointer to
Filter counter and then press the SELECT button. A dialog
box appears showing the Used time option and the Scrolls
remaining option. Use the Point ! buttons to select
Scroll(s) remaining.
3
Scroll(s) remaining shows the number of the remaining
scrolls and the Reset option. Select Reset and the “Scroll
counter Reset?” appears. Select [Yes] to continue.
4
Another confirmation dialog box appears, select [Yes] to
reset the Scroll counter.
Note:
s7HILETHESCROLLCOUNTERRESETISINPROGRESS@@0LEASE
WAITMESSAGEAPPEARSONTHESCREENTHECOOLINGFANS
OPERATEANDTHEFILTERCARTRIDGEISADJUSTED
LX1000 User Manual
020-000141-01 Rev. 1 (05-2009)
Scroll counter
Select “Scrolls remaining” and
the dialogue box below appears.
Select Reset and the “Scroll
counter Reset?” appears.
Select [Yes],
then another
confirmation
box appears.
Select [Yes] again to reset
the Scroll counter.
59
Maintenance and Care
Lamp Management
This Projector is equipped with 2 Projection Lamps to ensure brighter image and those lamps are controlled by
the Lamp Management Function. The Lamp Management Function detects the status of lamps and shows the
status on screen or on the LAMP 1/2 REPLACE indicators. This function also automatically controls the Lamp
Mode when any of lamps is out for the end of life or malfunctions.
LAMP 1/2 REPLACE
INDICATORS
Lamp mode
Lamp 1/2 Replace Indicators
The LAMP 1/2 REPLACE indicators light orange when any of Projection Lamps is nearing its end, and flash
when any of them becomes out. Check the number of lamp on the Lamp Status Display or the LAMP 1/2
REPLACE indicators and replace the lamp.
Lamp Status Display
The Lamp Status Display appears on screen when the projector is turned on or the input position (input 1, input
2, Input 3 or input 4) is switched. This shows the status of each lamp as; ON, OFF, NEAR END, or OUT. Refer
to the following for each status.
Yellow Lamp
Projection Lamp lights normally.
Dim Lamp
Projection Lamp is turned off.
Red Lamp
Projection Lamp is nearing its end. When the image
becomes darker or the color becomes unnatural,
replace lamp. (LAMP 1/2 REPLACE indicator lights
orange.)
(LAMP 1/2 REPLACE indicator flashes orange.)
Projection lamp is defective or fails to be turned on.
Restart the projector on, and make sure lamp is on.
If this mark still appears, replace lamp corresponding
with number marked X.
LAMP STATUS
DISPLAY
X Mark on Lamp
Lamp Mode Changeover
The Lamp Management Function automatically changes the lighting lamp (Lamp Mode) by detecting the status of lamp.
When either of the 2 lamps is out, the projector operates with 1 lamp. The Lamp Mode can be switched to 2 lamps or 1
lamp manually. Refer to the SETTING section on page 51.
2 LAMP MODE
1 LAMP MODE
When Lamp 1 is burnt out.
When Lamp 2 is burnt out.
60
LX1000 User Manual
020-000141-01 Rev. 1 (05-2009)
Maintenance and Care
Lamp Replacement
When the projection lamp of the projector reaches its end of life, the Lamp replacement icon appears on the
screen and LAMP 1/2 REPLACE indicator lights orange. Replace the lamp with a new one promptly. The timing
when the LAMP 1/2 REPLACE indicators should light is depending on the lamp mode.
Indicators
WARNING:
TURN OFF THE UV LAMP BEFORE
OPENING THE LAMP COVER.
Lamp replacement icon
Allow the projector to cool, for at least 45 minutes
before you open Lamp Cover. The inside of the
projector can become very hot.
LAMP 1 / 2 REPLACE indicators
Note:
s4HE,AMPREPLACEMENTICONWILLNOTAPPEAR
WHENTHE$ISPLAYFUNCTIONISSETTOh/FFvP
ORDURINGh&REEZEvP
CAUTION
For continued safety, replace with a lamp assembly
of the same type.
Do not drop the lamp assembly or touch a glass
bulb! The glass can shatter and may cause injury.
Follow these steps to replace the lamp.
1
Check the number of lamp to be replaced on the Lamp
Status Display.
2
Turn off the projector, press the Main On/Off Switch to Off
and unplug the AC power cord from the AC outlet. Let
the projector cool for at least 45 minutes.
3
Loosen a screw on the Lamp Cover. Slide and open the
Lamp Cover until it makes a clicking sound. (See the right
figure.)
Loosen two screws and pull out the Lamp to be replaced
by grasping handle.
4
5
Replace the Lamp with a new one and tighten two
screws. Make sure the Lamp is set properly.
6
Put the Lamp Cover back and tighten a screw.
7
Connect the AC Power Cord to the projector and turn on
the projector.
8
Reset the Lamp Replacement Counter. (Refer to section
"Resetting the Lamp Counter" on page 62.)
LAMP
COVER
LAMP 2
SCREWS
NOTE : Do not reset LAMP REPLACEMENT COUNTER when
lamp is not replaced.
SCREW
LAMP 1
Make sure which number of lamp needs to be
replaced on Lamp Status Display.
Figure shows case of replacing LAMP 1.
CAUTION : DO NOT OPERATE THE PROJECTOR WHILE ANY OF LAMPS IS REMOVED. IT MAY RESULT IN
MALFUNCTIONS, FIRE HAZARD, OR OTHER ACCIDENTS.
NOTES ON LAMP REPLACEMENT
To maintain quality of picture (better balance of color and brightness in entire screen), we
recommend replacing both 2 lamps at a time.
LX1000 User Manual
020-000141-01 Rev. 1 (05-2009)
61
Maintenance and Care
Resetting the Lamp Counter
Be sure to reset the Lamp counter after the lamp is replaced. When the Lamp counter is reset, the LAMP 1/2
REPLACE indicator stops lighting and the Lamp replacement icon disappears.
1
Press the MENU button to display the On-Screen Menu.
Use the Point buttons to move the red frame pointer
to the Setting Menu icon
2
Use the Point ! buttons to move the red frame pointer
to Lamp counter and then press the SELECT button.
A dialog box appears. Select a lamp and the “Lamp
replacement counter Reset?” appears. Select [Yes] to
continue.
Lamp counter
Select a lamp and the “Lamp
replacement counter Reset?”
appears.
Another confirmation dialog box appears and select [Yes]
to reset the Lamp counter.
3
Note:
s$ONOTRESETTHE,AMPCOUNTERWITHOUTREPLACINGTHELAMP
"ESURETORESETTHE,AMPCOUNTERONLYAFTERREPLACINGTHE
LAMP
Select [Yes], then another
confirmation box appears.
Select [Yes] again
to reset the lamp
counter.
ORDER REPLACEMENT LAMP
Replacement Lamp can be ordered through your dealer. When ordering a Projection Lamp, give the
following information to the dealer.
L
Model No. of your projector
L Replacement Lamp Type No.
:
:
LX1000
003-120479-01
(Service Parts No. 610 341 9497)
62
LX1000 User Manual
020-000141-01 Rev. 1 (05-2009)
Maintenance and Care
LAMP HANDLING PRECAUTIONS
This projector uses a high-pressure lamp which must be handled carefully and properly.
Improper handling may result in accidents, injury, or create a fire hazard.
L Lamp lifetime may differ from lamp to lamp and according to the environment of use. There is no
guarantee of the same lifetime for each lamp. Some lamps may fail or terminate their lifetime in a
shorter period of time than other similar lamps.
L If the projector indicates that the lamp should be replaced, i.e., if the LAMP 1/2 REPLACE indicators
light up, replace the lamp with a new one IMMEDIATELY after the projector has cooled down. (Follow
carefully the instructions in the Lamp Replacement section of this manual.) Continuous use of the lamp
with the LAMP 1/2 REPLACE indicators lighted may increase the risk of lamp explosion.
L Lamp may explode as a result of vibration, shock or degradation as a result of hours of use as its
lifetime draws to an end. Risk of explosion may differ according to the environment or conditions in
which the projector and lamp are being used.
IF A LAMP EXPLODES, THE FOLLOWING SAFETY PRECAUTIONS SHOULD BE TAKEN.
If a lamp explodes, disconnect the projector’s AC plug from the AC outlet immediately. Contact an
authorized service station for a checkup of the unit and replacement of the lamp. Additionally, check
carefully to ensure that there are no broken shards or pieces of glass around the projector or coming out
from the cooling air circulation holes. Any broken shards found should be cleaned up carefully. No one
should check the inside of the projector except those who are authorized trained technicians and who
are familiar with projector service. Inappropriate attempts to service the unit by anyone, especially those
who are not appropriately trained to do so, may result in an accident or injury caused by pieces of broken
glass.
LX1000 User Manual
020-000141-01 Rev. 1 (05-2009)
63
Maintenance and Care
Cleaning the Projection Lens
Turn off the projector, press the Main On/Off Switch to Off
and unplug the AC power cord from the AC outlet before
cleaning.
Gently wipe the projection lens with a cleaning cloth that
contains a small amount of non-abrasive camera lens
cleaner, or use a lens cleaning paper or commercially
available air blower to clean the lens.
Avoid using an excessive amount of cleaner. Abrasive
cleaners, solvents, or other harsh chemicals might scratch
the surface of the lens.
Cleaning the Projector Cabinet
Turn off the projector, press the Main On/Off Switch to Off
and unplug the AC power cord from the AC outlet before
cleaning.
Gently wipe the projector body with a soft dry cleaning
cloth. When the cabinet is heavily soiled, use a small amount
of mild detergent and finish with a soft dry cleaning cloth.
Avoid using an excessive amount of cleaner. Abrasive
cleaners, solvents, or other harsh chemicals might scratch
the surface of the cabinet.
When the projector is not in use, put the projector in
an appropriate carrying case to protect it from dust and
scratches.
64
LX1000 User Manual
020-000141-01 Rev. 1 (05-2009)
Maintenance and Care
Warning Indicators
The WARNING indicators show the state of the function which protects the projector. Check the state of the
WARNING TEMP. indicator and the LAMP indicator to take proper maintenance.
The projector is shut down and the WARNING TEMP.
indicator is blinking red.
Indicators
When the temperature inside the projector reaches a
certain level, the projector will be automatically shut down
to protect the inside of the projector. The LAMP indicator
turns red brighter and the WARNING TEMP indicator
blinks while the projector is being cooled down. When the
projector has cooled down enough (to its normal operating
temperature), it can be turned on again by pressing the ON/
STAND-BY button.
Note:
s4HE7!2.).'4%-0INDICATORCONTINUESTOBLINKEVENAFTERTHE
TEMPERATUREINSIDETHEPROJECTORRETURNSTONORMAL7HENTHEPROJECTOR
ISTURNEDONAGAINTHE7!2.).'4%-0INDICATORSTOPSBLINKING
WARNING TEMP.
blinking red
Then check the matters below:
– Did you provide appropriate space for the projector to be
ventilated? Check the installing condition to see if the air
vents of the projector are not blocked.
– Has the projector been installed near an Air-Conditioning/
Heating Duct or Vent? Move the installation of the
projector away from the duct or vent.
– Is the filter clean? Replace the filter with a new one.
The projector is shut down; and the LAMP indicator is
lighting and other indicators are blinking.
Indicators
When the projector detects an abnormal condition, it
will be automatically shut down to protect the inside of
the projector and the LAMP indicator lights on and other
indicators blink. In this case, unplug the AC power cord and
plug it, and then turn on the projector once again to verify
operation. If the projector cannot be turned on and these
indicators are still lighting and blinking, unplug the AC power
cord and contact the service station.
CAUTION
DO NOT LEAVE THE PROJECTOR WITH THE
AC POWER CORD CONNECTED UNDER AN
ABNORMAL CONDITION. IT MAY RESULT IN FIRE
OR ELECTRIC SHOCK.
LX1000 User Manual
020-000141-01 Rev. 1 (05-2009)
LAMP indicator lights on
and other indicators blink.
65
Appendix
Troubleshooting
Before calling your dealer or service center for assistance, check the items below once again.
1. Make sure you have properly connected the projector to peripheral equipment as described on pages 20–21.
2. Check the cable connection. Make sure that all computers, video equipment, and power cords are properly
connected.
3. Make sure that all power is switched on.
4. If the projector still does not produce an image, restart your computer.
5. If an image still does not appear, disconnect the projector from your computer and check your computer
monitor’s display. A problem may be noticed with your graphics controller rather than with the projector.
(When you reconnect the projector, be sure to turn the computer and monitor off before you turn on the
projector. Turn on equipment in the order of the projector and computer.)
6. If a problem still persists, check the following solutions.
Problem:
Solutions
No power.
– Plug the power cord of the projector into the AC outlet.
– Turn the MAIN ON/OFF switch to ON.
– Press the ON/STAND-BY Button to ON.
– Make sure the READY Indicator lights.
– Check the indicators. If the LAMP indicator lights and the other indicators blink, the
projector cannot be turned on.
(Refer to page 65.)
– Check the projection lamp. (Refer to page 61.)
PIN code dialog box
appears at start-up.
–PIN code lock is being set. Enter a PIN code; the “1234” or numbers you have set (see
pages 23, 53-54)
The initial display is not
shown.
– Make sure “Off ” or “Countdown Off” are not chosen at Display function.
(See “SETTING” section on page 48)
The initial display is not
same with the default
one.
– Make sure “User” or “Off” are not chosen at Logo select function.
(See “SETTING” section on page 49)
When the projector is on
and you press the input
button, an icon other
than the Lamp mode icon
appears.
– That is the Filter warning icon. Refer to page 56.
An icon other than Input
mode or Lamp mode icon
appears.
– That is the Lamp replacement icon or the Filter warning icon. See page 55-56.
No image.
– Check the connection between your computer or video equipment and the projector.
– See if the input signal is correctly output from your computer. Some laptop computers
may need to be changed the setting for monitor output when connected to the
projector. See your computer’s instruction manual for the setting.
– It takes about 20 seconds to display an image after turning on the projector.
– See if the selected system is corresponding with your computer or video equipment.
– Select correct input source once again through menu operation (see pages 31, 41-42).
– Make sure the temperature is not out of Operating Temperature (41˚F–104˚F [5˚C–
40˚C]).
66
LX1000 User Manual
020-000141-01 Rev. 1 (05-2009)
Appendix
– The end of lamp life is approaching. Replace the lamp with a new one promptly.
(See page 55)
appears on the screen
–The filter is out of scroll. Replace the filter cartridge with a new one promptly. (See
pages 57-58)
appears on the screen
The image is out of focus.
– Adjust the focus of the projector.
– Check Projection Lens to see if it needs cleaning.
Note:Moving the projector from a cool temperature location to a warm temperature
location may result in moisture condensation on Projection Lens. In such cases,
leave the projector OFF and wait until condensation evaporates.
– Projecting from excessive slant angle to the screen may cause keystone distortion and
partial imperfect focus.
The image is not bright
enough.
–Check if “Contrast” or “Brightness” are adjusted properly. (See page 45)
–Check if “Image level” is selected properly. (See pages 38, 42)
–Check the Lamp control function. ( See “SETTING” section on page 51)
– Check the Lamp 1/2 replace indicators. If it lights, the end of lamp life is approaching.
Replace the lamp with a new one promptly. (See page 61)
–The image is darker when 1 lamp mode is selected, compared with 2 lamp mode.
Check the lamp mode at SETTING section on page 51.
The color is strange.
The image is Left/Right
reversed.
The image is Top/Bottom
reversed.
The image is distorted or
runs off.
Auto PC adjustment
function does not work.
–Check the Input signal, color system, video system, or computer system mode.
– Check the Ceiling / Rear function. (See pages 40, 44.)
– Check the Ceiling function. (See pages 40, 44.)
–Check “PC Adjust” menu or “ Screen” menu and adjust them.
–Check the Input signal. Auto PC Adjustment function cannot work when 480p, 575p,
720p, 480i, 575i, 1035i, or 1080i is selected or when the digital signal is input into DVI
terminal. (See page 35)
Some displays are not
– Check the Display function (see page 48).
seen during the operation.
The setting does not
remain after turning off
power.
Power management
function does not work.
Image disappears
automatically.
Capture function does not
work.
Some menus cannot be
selected.
LX1000 User Manual
020-000141-01 Rev. 1 (05-2009)
–Make sure you selected “Store” after adjusting settings. Some settings cannot be
stored if not registered with “Store”.
–Power management function cannot work while “Freeze” function is running or the
shutter is closed.
– Check the power management function in the Setting. The power management is set
to "On" at the factory.
–Check the connection to see if there is signal.
–Each of the Video Input and Computer Input has a limit on selectable menus.
67
Appendix
The power is turned off
automatically.
–Power management function runs by initial setting. Check “SETTING” section on page
52.
You cannot operate with
the side control.
–The side control is not available If the side control is locked at “Key lock” under
“Security” of SETTING section. Please check “SETTING” section on page 53.
The Remote Control does
not work.
–Check the batteries.
–Check if the RC sensor is set properly.(See page 52)
–Make sure no obstruction is between the projector and remote control.
–Make sure you are not too far from the projector when using the remote control.
Maximum operating range is 16.4’ (5m).
–Make sure that the remote control code conforms to the projector’s code.
(See “SETTING” section on page 52.)
–Make sure the reset switch in the compartment lid on back of the remote control is set
to use position.
–Unlock the Key lock function for the remote control. (See page 53)
–Wireless remote control does not work when the remote control cable is connected to
the projector. (See page 15)
Indicators blinks or lights.
–Check the status of the projector with referring to “ INDICATORS AND PROJECTOR
CONDITION” on pages 72-74.
–Your operation is invalid. Operate correctly.
appears on the screen
Unable to unlock the Logo
PIN code lock, Security
–Contact the dealer where you purchased the projector or the service center.
key lock or Security PIN
code lock.
Forget the Logo PIN code
or Security PIN code.
–Contact the dealer where you purchased the projector or the service center.
WARNING:
High voltages are used to operate this projector. Do not attempt to open the cabinet.
If problems still persist after following all operating instructions, contact the dealer where you purchased the projector
or the service center. Specify the model number and explain about the problem. We will advise you how to obtain
service.
This symbol on the nameplate means the product is Listed by Underwriters
Laboratories Inc. It is designed and manufactured to meet rigid U.L. safety
standards against risk of fire, casualty, and electrical hazards.
The CE Mark is a Directive conformity mark of the European Community (EC).
68
LX1000 User Manual
020-000141-01 Rev. 1 (05-2009)
Appendix
Menu Tree
Computer Input/Video Input
Input
Input 1
Go to System (1)
RGB (PC analog)
RGB (Scart)
Input 2
Go to System (1)
RGB (AV HDCP)
Go to System (1)
RGB
Go to System (1)
Y, Pb/Cb,Pr/Cr
Go to System (3)
Video
Go to System (2)
S-video
Go to System (2)
Input 3
(For Optional Interface Boards)
Input 4
(For Optional Interface Boards)
Information
Information
RGB (PC digital)
Image Adjust
Image Adjust
Input
H-sync freq.
V-sync freq.
Screen
Language
Lamp mode
Lamp control
Power management
Shutter management
Contrast
Brightness
Color =
Tint =
Color
management
Remote Control
0–63
0–63
0–63
0–63
Color
Gamma
List
Color M.
Menu
Projector
Security
5 - 180 Min
Key lock
Auto picture
control
Off/L1/L2
PIN code lock
Color temp.
XLow
High
Mid
Low
Low
Mid
High
Red
Green
Blue
0–63
0–63
0–63
Remote control
All Del
Mid
Low
Menu
Color M.
Adj.
Offset
Red/Green/Blue/Quit
Sharpness
Gamma
0–31
0–15
Noise reduction =
Off/On
Progressive =
Off/On/Film
Reset
Store
Yes / No
Image 1
Image 10
Quit
Quit
=
$ISPLAYEDINGRAYOUTINTHECOMPUTER)NPUT
Note:
s4HE-ENUDISPLAYVARIESDEPENDINGONTHEINPUTSIGNAL
LX1000 User Manual
020-000141-01 Rev. 1 (05-2009)
69
Appendix
Computer Input
System (1)
Image Select
Mode 1
Standard
Mode 2
Real
SVGA 1
Image 1
SVGA 2
SVGA 3
Image 10
= System displayed in the System Menu varies depending on the input signal.
PC Adjust
Screen
Auto PC adj.
Fine sync.
Normal
True
0–31
Total dots
Wide
Position H
Full screen
Position V
Scale
H /V
H &V
On/Off
Position
H /V
Common
Reset
Custom
H-sync freq.
Current mode
V-sync freq.
Quit
Clamp
Quit
Display area - H
Digital zoom +
Display area - V
Digital zoom -
Reset
Yes/No
Keystone
Mode 1
Ceiling
Rear
Store
Reset
On/Off
On/Off
Reset
Yes/No
Mode free
Store
Mode 10
Quit
Quit
Quit
Video Input
System (2)
System (3)
Auto
Auto
PAL
1080i
SECAM
1035i
NTSC
720p
NTSC 4.43
575p
PAL-M
480p
PAL-N
575i
480i
Image Select
Standard
Screen
Normal
Cinema
Wide
Image 1
Custom
Image 10
Scale
H /V
On/Off
H &V
Position
H /V
Common
Reset
Quit
Keystone
Ceiling
Rear
Reset
Quit
Store
Reset
On/Off
On/Off
Yes/No
Note:
s4HE-ENUDISPLAYVARIESDEPENDINGONTHEINPUTSIGNAL
70
LX1000 User Manual
020-000141-01 Rev. 1 (05-2009)
Appendix
Computer Input/Video Input
Setting
12 languages provided.
Language
Quit
Menu
Position/Simple Menu/Quit
Display
Off/Countdown Off/On
Background
Blue/User/Black
Logo
Off/Default/User
Logo select
Capture
Yes/No
Logo PIN code lock
On/Off
Logo PIN code change
Quit
Quit
Lamp mode
2-Lamp mode/ 1-Lamp mode
Lamp control
Auto/Normal/Eco
Filter control
Yes/No
Fan control
Normal/Max
Remote Control
Code 1
Code 8
Quit
Both/Front/Back
RC sensor
Off/Ready/Shut down
Power management
1–30 Min.
Quit
On/Off
On start
Security
Key lock
Off
Projector
Remote Control
PIN code lock
Off/On1/On2
PIN code change
Quit
Quit
Projector ID
Shutter
1–999
Protection
Remote control
On / Off
Projector
On / Off
Management
5 - 180 Min.
Quit
Lamp counter
Lamp 1/2 [ ] Hour(s)
Yes/No
Reset
Quit
Filter counter
Used time
[ ] Hour(s)
Off/400H/700H/1000H
Reset
Yes/No
Quit
Scrolls remaining
Scroll(s)
Reset
Yes/No
Quit
Quit
Test pattern
8 test patterns provided
Quit
Factory default
Yes/No
Quit
LX1000 User Manual
020-000141-01 Rev. 1 (05-2009)
71
Appendix
Indicators and Projector Condition
Check the indicators for the projector condition.
The projector is operating normally.
Indicators
LAMP
red
READY
green
Projector Condition
LAMP 1/2
WARNING WARNING
SHUTTER
REP.
TEMP.
FILTER
blue
orange
red
orange
The projector is off. (The main On/Off switch is OFF
position or the AC power cord is unplugged.)
=
The projector is in stand-by mode. Press the ON/
STAND-BY button to turn on the projector.
=
=
The projector is operating normally.
(The Shutter is open)
=
=
The projector is operating normally.
(The Shutter is closed)
=
=
=
=
=
The projector is preparing for stand-by or the
projection lamp is being cooled down. The projector
cannot be turned on until cooling is completed and
the READY indicator lights green.
=
=
The projection lamp is being cooled down in the
Power management mode.
=
=
The projector is in the Power management mode.
=
=
The projection lamp is being cooled down in the
Shutter management mode.
=
The projector is in the Shutter management mode.
Press the ON/STAND-BY button to turn on the
projector.
=
=
=
The filter is scrolled using the FILTER button on
the remote control or the Filter control function in
the setting menu. When the filter is being scrolled,
the Filter replacement icon and “Please wait...”
message (Fig. 1) appear on the screen.
Fig.1 Filter replacement icon and “Please wait...”
sssON
sssDIM
sssBLINKINGFAST
sssOFF
72
sssBLINKINGSLOW
(approx. 2 seconds ON,
2 seconds OFF)
sssBLINKINGATTHENORMALRATE
(approx. 1 second ON,
1 second OFF)
(approx. 0.5 seconds ON,
0.5 seconds OFF)
=
sssDiffers according to conditions.
LX1000 User Manual
020-000141-01 Rev. 1 (05-2009)
Appendix
The projector is detecting abnormal condition.
Indicators
LAMP
red
READY
green
LAMP 1/2
WARNING WARNING
SHUTTER
REP.
TEMP.
FILTER
blue
orange
red
orange
=
=
=
=
=
=
=
=
=
The temperature inside the projector is elevated
close to the abnormally high level.
=
The temperature inside the projector is abnormally
high. The projector cannot be turned on. When
the projector is cooled down enough and the
temperature returns to normal, the READY indicator
lights green and the projector can be turned on. (The
WARNING TEMP. indicator keeps blinking.)
=
The projector has been cooled down enough and
the temperature returns to normal. When turning on
the projector, the WARNING TEMP. indicator stops
blinking. Check and replace the filter.
=
The lamp cannot light up. (The projector is preparing
for stand-by or the projection lamp is being cooled
down. The projector cannot be turned on until
cooling is completed.)
=
=
The lamp cannot light up. (The lamp has been
cooled down enough and the projector is in standby mode and ready to be turned on with the ON/
STAND-BY button.)
=
=
When either of the 2 lamps is out, the projector
operates with 1 lamp.
=
The lamp has been used overtime. Replace the
lamp immediately and then reset the lamp counter.
The indicator will be turned off after resetting the
counter.
=
=
=
Projector Condition
=
WARNING FILTER
When the filter detects clogging, reaches a time set in the timer setting or runs out of the filter scroll, the WARNING
FILTER indicator lights orange. When this indicator lights orange, replace the filter or the filter cartridge with a new
one promptly. Reset the Filter counter and Scroll counter after replacing the filter cartridge (p.59).
LAMP REPLACE 1 and 2
When the LAMP 1 REPLACE indicator and the LAMP 2 REPLACE indicator light orange, replace the projection lamps
with new ones promptly. And then reset the Lamp time after replacement of the lamps. See pages 55, 61, and 62.
LX1000 User Manual
020-000141-01 Rev. 1 (05-2009)
73
Appendix
The projector is detecting abnormal condition.
Indicators
LAMP
red
READY
green
WARNING WARNING
SHUTTER
TEMP.
FILTER
blue
red
orange
=
LAMP 1/2
REP.
orange
=
Fig.2 Filter replacement icon
Fig.3
Projector Condition
If the Filter counter reached a time set in the timer
setting, a Filter replacement icon (Fig.2) appears
on the screen and the WARNING FILTER indicator
on the top panel lights up. Replace the filter as
soon as possible. If the filter is out of scroll and the
projector reaches a time set in the timer setting, Fig.
3 appears on the screen and the WARNING FILTER
indicator lights up. Replace the filter cartridge as
soon as possible.
If the filter is clogged and no scroll is left in the filter
cartridge, a Filter cartridge replacement icon (Fig.4)
appears on the screen and the WARNING FILTER
indicator lights up. Replace the filter cartridge as
soon as possible.
Note:
Fig.4 Filter cartridge replacement icon
s&IG&IGAND&IGICONWILLNOTAPPEARWHEN
THE$ISPLAYFUNCTIONISSETTOh/FFvPORDURING
h&REEZEvP
=
=
The projector detects an abnormal condition during
filter scroll.
=
=
The projector is being cooled down after detecting
an abnormal condition during filter scroll.
=
=
The projector has been cooled down enough and is
in the stand-by mode after detecting an abnormal
condition during filter scroll.
The filter cartridge is not installed in the projector.
Check the filter compartment to see if the filter
cartridge is installed in the projector. When the filter
cartridge is installed and the indicators continue to
light and blink, read the column below.
The projector detects an abnormal condition and
cannot be turned on. Unplug the AC power cord and
plug it again to turn on the projector. If the projector
is turned off again, unplug the AC power cord and
contact the dealer or the service center. Do not
leave the projector on. It may cause an electric
shock or a fire hazard.
=
74
=
=
=
=
The shutter is out of control.
=
=
The shutter is out of control. (The projector is in the
cooling mode.)
=
=
The shutter is out of control. (The projector is in the
stand-by mode.) In that case, contact the service
station immediately.
LX1000 User Manual
020-000141-01 Rev. 1 (05-2009)
Appendix
Compatible Computer Specifications
Basically this projector can accept the signal from all computers with the V- and H-Frequency mentioned below
and less than 230 MHz of Dot Clock.
PC Adjustment can be limited when these modes are selected.
ON-SCREEN
DISPLAY
VGA 1
VGA 2
VGA 3
VGA 4
VGA 5
VGA 6
VGA 7
MAC LC13
MAC 13
480p
575p
RESOLUTION H-Freq.(kHz) V-Freq.(Hz)
575i
480i
SVGA 1
SVGA 2
SVGA 3
SVGA 4
SVGA 5
SVGA 6
SVGA 7
SVGA 8
SVGA 9
SVGA 10
SVGA 11
MAC 16
XGA 1
XGA 2
XGA 3
XGA 4
XGA 5
XGA 6
XGA 7
XGA 8
XGA 9
XGA 10
XGA 11
XGA 12
XGA 13
XGA 14
XGA 15
MAC 19
SXGA 1
SXGA 2
SXGA 3
SXGA 4
SXGA 5
640x480
720x400
640x400
640x480
640x480
640x480
640x480
640x480
640x480
640x480
768x575
768x576
(Interlace)
640x480
(Interlace)
800x600
800x600
800x600
800x600
800x600
800x600
800x600
800x600
800x600
800x600
800x600
832x624
1024x768
1024x768
1024x768
1024x768
1024x768
1024x768
1024x768
1024x768
1024x768
(Interlace)
1024x768
1024x768
1024x768
(Interlace)
1024x768
1024x768
1024x768
1024x768
1152x864
1280x1024
1280x1024
1280x1024
1280x1024
31.470
31.470
31.470
37.860
37.860
37.500
43.269
34.970
35.000
31.470
31.250
59.880
70.090
70.090
74.380
72.810
75.000
85.000
66.600
66.670
59.880
50.000
15.625
50.000
15.734
60.000
35.156
37.880
46.875
53.674
48.080
37.900
34.500
38.000
38.600
32.700
38.000
49.720
48.360
68.677
60.023
56.476
60.310
48.500
44.000
63.480
56.250
60.320
75.000
85.060
72.190
61.030
55.380
60.510
60.310
51.090
60.510
74.550
60.000
84.997
75.030
70.070
74.920
60.020
54.580
79.350
36.000
87.170
62.040
61.000
77.070
75.700
35.522
86.960
46.900
47.000
58.030
60.240
64.200
62.500
63.900
63.340
63.740
58.200
58.300
72.000
75.080
70.400
58.600
60.000
59.980
60.010
ON-SCREEN
DISPLAY
SXGA 6
SXGA 7
SXGA 8
SXGA 9
SXGA 10
SXGA 11
SXGA 12
SXGA 13
SXGA 14
SXGA 15
SXGA 16
SXGA 17
SXGA 18
SXGA 19
SXGA 20
SXGA+ 1
SXGA+ 2
SXGA+ 3
SXGA+ 4
SXGA+ 5
MAC 21
MAC
MAC
WXGA 1
WXGA 2
WXGA 3
WXGA 4
WXGA 6
WXGA 7
WXGA 8
WXGA 9
WXGA 10
WXGA 11
WUXGA 1
WSXGA+ 1
WXGA+ 1
UXGA 1
UXGA 2
UXGA 3
UXGA 4
UXGA 5
720p
720p
1035i
1080i
RESOLUTION H-Freq.(kHz) V-Freq.(Hz)
1280x1024
1280x1024
1280x1024
1280x1024
1280x960
1152x900
1152x900
1280x1024
(Interlace)
1280x1024
(Interlace)
1280x1024
1280x1024
1152x900
1280x1024
(Interlace)
1280x1024
1280x1024
1400x1050
1400x1050
1400x1050
1400x1050
1400x1050
1152x870
1280x960
1280x1024
1366x768
1360x768
1376x768
1360x768
1280x768
1280x768
1280x768
1280x800
1280x800
1280x800
1920x1200
1680x1050
1440x900
1600x1200
1600x1200
1600x1200
1600x1200
1600x1200
1280x720
1280x720
1920x1035
(Interlace)
1920x1080
(Interlace)
1920x1080
(Interlace)
71.690
81.130
63.980
79.976
60.000
61.200
71.400
67.190
76.107
60.020
75.025
60.000
65.200
75.600
50.000
86.000
50.000
94.000
63.370
76.970
61.850
60.010
72.000
66.000
46.430
86.700
63.790
91.146
63.970
65.350
65.120
64.030
62.500
68.680
75.000
80.000
48.360
47.700
48.360
56.160
47.776
60.289
68.633
49.600
41.200
49.702
74.556
65.290
55.935
75.000
81.250
87.500
93.750
106.250
45.000
37.500
60.180
85.024
60.190
60.120
59.900
60.010
58.600
75.060
75.080
75.080
60.000
60.000
60.000
72.000
59.870
74.893
84.837
60.050
50.000
59.810
59.885
59.954
59.887
60.000
65.000
70.000
75.000
85.000
60.000
50.000
33.750
60.000
33.750
60.000
28.125
50.000
=
=
=
=
=
= “True” cannot be selected when WUXGA1, UXGA2, UXGA3, UXGA4 and UXGA5 are selected (p.39)
LX1000 User Manual
020-000141-01 Rev. 1 (05-2009)
75
Appendix
When an input signal is digital from the DVI terminal, refer to the chart below.
ON-SCREEN
DISPLAY
D-VGA
D-480p
D-575p
D-SVGA
D-XGA
D-WXGA 1
D-WXGA 2
D-WXGA 3
D-WXGA 4
D-WXGA 5
D-WXGA 6
D-WXGA 7
D-WXGA 8
D-WXGA 9
D-WXGA 10
D-WXGA 11
D-SXGA 1
D-SXGA 2
RESOLUTION H-Freq.(kHz) V-Freq.(Hz)
640x480
720x480
720x575
800x600
1024x768
1366x768
1360x768
1376x768
1360x768
1366x768
1280x768
1280x768
1280x768
1280x800
1280x800
1280x800
1280x1024
1280x1024
31.470
31.470
31.250
37.879
43.363
48.360
47.700
48.360
56.160
46.500
47.776
60.289
68.633
49.600
41.200
49.702
63.980
60.276
59.940
59.880
50.000
60.320
60.000
60.000
60.000
60.000
72.000
50.000
59.870
74.893
84.837
60.050
50.000
59.810
60.020
58.069
ON-SCREEN
DISPLAY
D-SXGA+ 1
D-SXGA+ 2
D-SXGA+ 3
D-WSXGA+ 1
D-WXGA+ 1
D-720p
D-720p
D-1035i
D-1080i
D-1080psf/30
D-1080psf/25
D-1080psf/24
RESOLUTION H-Freq.(kHz) V-Freq.(Hz)
1400x1050
1400x1050
1400x1050
1680x1050
1440x900
1280x720
1280x720
1920x1035
(Interlace)
1920x1080
(Interlace)
1920x1080
(Interlace)
1920x1080
1920x1080
1920x1080
63.970
65.350
65.120
65.290
55.935
45.000
37.500
60.190
60.120
59.900
59.954
59.887
60.000
50.000
33.750
60.000
33.750
60.000
28.125
50.000
33.750
28.125
27.000
60.000
50.000
48.000
Note:
s$EPENDINGONTHECONDITIONOFSIGNALSANDTHETYPEANDLENGTHOFCABLESTHESESIGNALSMAYNOTBEPROPERLYVIEWED
s3PECIFICATIONSARESUBJECTTOCHANGEWITHOUTNOTICE
76
LX1000 User Manual
020-000141-01 Rev. 1 (05-2009)
Appendix
Technical Specifications
Mechanical Information
Projector Type
Dimensions (W x H x D)
Net Weight
Feet Adjustment
Multi-media Projector
20.87” x 10.53” x 29.8” (530 mm x 267.5 mm x 757 mm)
60.85lbs (27.6 kg)
0˚ to 2.8˚
Panel Resolution
LCD Panel System
Panel Resolution
Number of Pixels
1.8” TFT Active Matrix type, 3 panels
1,024 x 768 dots
2,359,296 (1,024 x 768 x 3 panels)
Signal Compatibility
Color System
High Definition TV Signal
Scanning Frequency
PAL, SECAM, NTSC, NTSC4.43, PAL-M, and PAL-N
480i, 480p, 575i, 575p, 720p, 1035i, and 1080i
H-sync. 15 kHz–120 kHz, V-sync. 48 Hz–120 Hz
Optical Information
Projection Lamp
330 W NSHA lamp x 2
Interface
Input 1
Input 2
Other Jacks
DVI-D Terminal (Digital), Mini D-Sub 15-pin Terminal (Analog)
BNC Type x 5 (VIDEO/Y/G, B/Pb/Cb, R/Pr/Cr, H/HV and V), S-Video
Serial port in (D-sub 9), Serial port out (D-sub 9), USB port, and Wired Remote Jack
Power
Voltage and Power Consumption
AC 100–120 V (11.2A Max. Ampere), 50/60 Hz (The U.S.A and Canada)
AC 200-240 V (5.1A Max. Ampere), 50/60 Hz (Continental Europe)
Operating Environment
Operating Temperature
Storage Temperature
41˚F–104˚F (5˚C–40˚C)
14˚F–140˚F (-10˚C–60˚C)
Remote Control
Battery
Operating Range
Dimensions
Net Weight
AA or LR6 Type x 2
16.4’ (5 m/±30˚)
1.79” (W) x 1.03” (H) x 6.24” (D) (45.5 mm x 26.2 mm x 158.5 mm)
4.1 oz (117 g) (including batteries)
Accessories
Owner’s Manual (CD-ROM)
Quick Reference Guide
AC Power Cord
Remote Control and Batteries
VGA Cable
PIN Code Label
Lens Attachments (1 type) (For option lens)
Light Block Plates (3 types) (For option lens)
Spacer (For option lens)
Real Color Manager Pro (CD-ROM)
Mounting Clamp
LX1000 User Manual
020-000141-01 Rev. 1 (05-2009)
77
Appendix
L The specifications are subject to change without notice.
L LCD panels are manufactured to the highest possible standards. Even though 99.99% of the pixels are effective, a tiny
fraction of the pixels (0.01% or less) may be ineffective by the characteristics of the LCD panels.
L Each projector has its own characteristics.
When projecting with several projectors on the same screen or side by side, you may recognize different white balance
and color uniformity on each projector.
Optional Parts
The parts listed below are optionally available. When ordering those parts, specify the item name and Model No.
to the sales dealer.
-ODEL.O
Optional Interface Board (DVI)
: Optional Interface Board (5-BNC)
: Optional Interface Board (D-sub 15)
: Optional Interface Board (Dual-SDI)
: For a full list of Optional Interface Boards, please visit: www.ChristieDigital.com
78
LX1000 User Manual
020-000141-01 Rev. 1 (05-2009)
Appendix
Configurations of Terminals
ANALOG (Mini D-sub 15 pin)
4
5
10
15
9
14
2
3
8
13
1
7
12
6
11
1
2
3
4
5
6
7
8
Red Input
Green Input
Blue Input
1
2
3
4
5
6
7
8
T.M.D.S. Data2–
T.M.D.S. Data2+
T.M.D.S. Data2 Shield
No Connect
No Connect
DDC Clock
DDC Data
No Connect
No Connect
Ground (Horiz.sync.)
Ground (Red)
Ground (Green)
Ground (Blue)
9
10
11
12
13
14
15
+5V Power
Ground (Vert. sync.)
Ground
DDC Data
Horiz. sync.
Vert. sync.
DDC Clock
DIGITAL DVI-D (DVI 24 PIN)
1 2 3 4 5 6 7 8
9 10 11 12 13 14 15 16
17 18 19 20 21 22 23 24
9
10
11
12
13
14
15
16
T.M.D.S. Data1–
T.M.D.S. Data1+
T.M.D.S. Data1 Shield
No Connect
No Connect
+5V Power
Ground (for +5V)
Hot Plug Detect
17
18
19
20
21
22
23
24
T.M.D.S. Data0–
T.M.D.S. Data0+
T.M.D.S. Data0 Shield
No Connect
No Connect
T.M.D.S. Clock Shield
T.M.D.S. Clock+
T.M.D.S. Clock–
USB CONNECTOR (Series B)
2
1
3
4
1
2
3
4
Vcc
- Data
+ Data
Ground
CONTROL PORT CONNECTOR (D-sub 9 pin)
Serial
1
2
3
4
5
6
7
8
9
LX1000 User Manual
020-000141-01 Rev. 1 (05-2009)
----RXD
TXD
----SG
----RTS
CTS
-----
79
Appendix
PIN Code Number Memo
Write down the PIN code number in the column below and keep it with this manual securely. If you forgot or
lost the number and unable to operate the projector, contact the service station.
PIN Code Lock No.
Factory default set No: 1 2 3 4*
Logo PIN Code Lock No.
Factory default set No: 4 3 2 1*
* Should the four-digit number be
changed, the factory set number will
be invalid.
While the projector is locked with the PIN code...
Put the label below (supplied) on in a prominent place of
the projector’s body while it is locked with a PIN code.
80
LX1000 User Manual
020-000141-01 Rev. 1 (05-2009)
Appendix
Dimensions
10.53(267.5)
9.63(244.5)
4.72(120) 5.81(147.5)
Unit: inch (mm)
Screw Holes for Ceiling Mount
Screw: M8
Depth: 0.393 (10.0)
200.0
234.0
1.18(30)
10.43(265)
7.28(185)
10.89(276.5)
5.00(127)
8.46(215)
8.27(210)
23.62(600)
8Ň
10
20.65(524.5)
8.66(220)
6.89(175)
26.77(680)
29.80(757.0)
3.03(77)
20.87(530)
9.82(249.5)
1.14(29)
9.25(235)
LX1000 User Manual
020-000141-01 Rev. 1 (05-2009)
9.25(235)
81
Americas
USA
Christie Digital Systems USA, Inc.
10550 Camden Drive
Cypress CA 90630
PH: 714-236-8610
FX: 714-503-3375
Customer Service: 1-866-880-4462
sales-us@christiedigital.com
Canada
Christie Digital Systems Canada, Inc.
809 Wellington St. N.
Kitchener, Ontario N2G 4Y7
PH: 519-744-8005
FX: 519-749-3321
Customer Service: 1-800-265-2171
sales-canada@christiedigital.com
Chile
Representative Office
Christie Digital Systems USA, Inc.
Av. Pedro Fontova 7619 of 60
Santiago
PH: 56-2-721 11 75
Mobile: 5699 436 6555
United Kingdom
Branch Office
Christie Digital Systems Canada, Inc.
ViewPoint
200 Ashville Way
Wokingham
Berkshire, U.K.
RG41 2PL
PH: +44 (0) 118 977 8000
FX: +44 (0) 118 977 8100
sales-europe@christiedigital.com
France
Representative Office
Christie Digital Systems Canada, Inc.
Bâtiment D-Hall 4
Parc Louis Roche
96/114 Avenue Louis Roche
F-92230 Gennevilliers
France
PH: +33 (0)1 41 21 44 04
FX: +33 (0)1 41 21 00 36
sales-france@christiedigital.com
Germany
Representative Office
Christie Digital Systems Canada, Inc.
Willicher Damm 129
D-41066
Mönchengladbach
PH: +49 2161 664540
FX: +49 2161 664546
sales-germany@christiedigital.com
Eastern Europe
Representative Office
Christie Digital Systems Canada, Inc.
Regus Bank Centre
Szabadsag ter 7.
H-1054 Budapest
Hungary
PH: +36 (0)1 47 48 100
FX: +36 (0)1 47 48 452
sales-europe@christiedigital.com
Middle East
Representative Office
Christie Digital Systems Canada, Inc.
C/O Emirates Group Security
Building,
C Block, Room 207, 208, 209
Airport Free Zone
PO Box 293762
Dubai, UAE
PH: +971 (0) 4 299 7575
FX: +971 (0) 4 299 8077
Spain
Christie Authorized Reseller
Antonio Abad
Polígono Industrial Ventorro Del
Cano
Esquina C/ Aldea del Fresno, 3
3ª Puerta. Izqda
28925 Alcorcón, Madrid
PH: + 34 91 633 9990
FX: + 34 91 633 9991
Italy
Christie Authorized Reseller
Angelo Tacca
Via Garibaldi, 88
20024 Garbagnate Milanese (MI)
PH: +39 02 9902 1161
FX: +39 02 9902 2641
Africa
Representative Office
Christie Digital Systems Canada, Inc.
4 Patricia Road
Gillitts
KwaZulu Natal
3610
Republic of South Africa
PH: +27 (0) 317 671 347
FX: +27 (0) 317 671 347
MB: +27 (0) 823 045 442
Singapore
Branch Office
Christie Digital Systems USA, Inc.
627A Aljunied Road
# 05-02 Biz Tech Centre
Singapore, 389842
PH: +65 6877-8737
FX: +65 6877-8747
sales-singapore@christiedigital.com
China - Beijing
Representative Office
Christie Digital Systems USA, Inc.
7B15, Hanwei Plaza
Guanghua Road
Chaoyang District,
Beijing, 100004
PH: +86 10 6561 0240
FX: +86 10 6561 0546
sales-china@christiedigital.com
China - Shanghai
Representative Office
Christie Digital Systems USA, Inc.
Room 1109--1116 Shartex Plaza
No. 88 Zun Yi South Road
Shanghai 200336
PH: +86 21 6278 7708
FX: +86 21 6278 5816
sales-china@christiedigital.com
Japan
Representative Office
Christie Digital Systems USA, Inc.
A-bldg., 2nd Floor
Ariake Frontier Building
3-1-25, Ariake, Koto-ku
Tokyo, 135-0063
PH: 81-3-3599-7481
FX: 81-3-3599-7482
sales-japan@christiedigital.com
South Korea
Representative Office
Christie Digital Systems USA, Inc.
6F, ILSIN Building, 15-15
Yeouido-dong,
Yeongdeungpo-gu, Seoul,
150-872 South Korea
PH:+82 2 702 1601
FX: +82 2 702 1602
India
Representative Office
Christie Digital Systems USA, Inc.
Unit No. 03, Navigator Building
International Technology Park
Whitefield Road
Bangalore 560 066
India
PH: (080) 41468941 – 48
FX: (080) 41468949
Europe, Middle East & Africa
Asia Pacific
KW7K
82
LX1000 User Manual
020-000141-01 Rev. 1 (05-2009)
Download PDF
Similar pages