Vision Systems GmbH - VScom 200I-SI UPCI
Features
Universal PCI 3.3 / 5.0V
2x RS232, RS422/485
RS485 ART (Automatic Receive Transmit Control)
RS485 in 3 operation modes
optical isolation, surge protection (also in RS232)
Compact board size (half-size)
Hardware flow control
Built-in t
Zoom in Picture
VScom 200I-SI UPCI
Quick Link: | Features | Overview | Applications | Specification | Hardware | Interface | Performance | Configuration
| Available modes | Power and Environment | Operating Systems supported |
|
Overview
The VScom 200I-SI uPCI is designed for RS232, RS422/485 industrial communication. It supports 2
independent RS232, RS422 or RS485 ports. Each port can be configured separate.
Available modes : RS232, RS422 fullduplex
RS485 full duplex (4 wire)
RS485 half duplex (2 wire) with and without echo.
In RS485 modes applications enable transmission by simply sending data.
This is done by ART (Automatic Receive Transmit control) intelligence.
The Transmitter is disabled exactly with the end of the last character sent. No modification is
necessary in programs.
In addition, hardware flow control and built-in termination resistors guarantee data integrity.
Optical isolation and surge protection ara also available for RS232 Signals to deliver high reliability.
All of these features make VScom 200I - SI uPCI suitable for harsh industrial applications.
Optical isolated RS232 presents 200I-SI as a choice for medical environment.
Applications
Industrial control
Embedded industrial machine
SCADA
Multiport data acquisition
Factory automation
Remote serial device control
Specification
Hardware
I/O controller
2x 16C550C or compatible, each with 16 bytes Tx/Rx FIFO
Connector type
Male DB9
>Back to top
Interface
Bus interface
PCI version 2.1 (32bit) Universal PCI 3.3V / 5.0V
Serial interface
RS232, RS422 / 485
file:///L|/Web-Daten/VisionSystems_NEW/produkte/datasheet_html/4439_data.html (1 von 3)24.07.2006 12:46:26
Vision Systems GmbH - VScom 200I-SI UPCI
No. of ports
2
Signals
RS232 Tx, Rx, CTS, RTS also with optical isolation and surge
protection
RS422 TxD+/-, RxD+/-, RTS+/-, CTS+/-, GND
RS485 Data+/-, GND
RS485 data control
ART (Automatic Receive Transmit control)
Built-in termination
resistor
RS422 120 Ohm
RS485 120 Ohm, jumper enable / disable
>Back to top
Performance
Speed
up to 921.6Kbps
Max. no. of ports
Unlimited
>Back to top
Configuration
Parity
None, even, odd, space, mark
Data bits
5, 6, 7, 8
Stop bits
1, 1.5, 2
IRQ
Assigned by System
I/O address
Assigned by System
>Back to top
Available modes
RS232
full duplex
RS422
full duplex
RS485
4 wire , full duplex
RS485
2 wire, half duplex, with echo
RS485
2 wire, half duplex, without echo
>Back to top
Power and Environment
Power requirement
430mA max.(+5V)
Operation temp.
0°C - 55°C
Dimension
120mm x 100mm
>Back to top
Operating Systems supported
WIN95, WIN98, ME
VScom high performance serial driver
WIN NT 4.0
VScom high performance serial driver
control panel applet
WIN 2000, XP
VScom high performance serial driver
Win 2003 Server
VScom high performance serial driver
DOS
virtuell address driver and compatibility tools
real DOS Com port emulation
OS/2
Supported by COM16 driver in recent system releases
Third party serial driver SIO.SYS available
Linux
Kernel 2.6 and up: built-in support
Previous kernel: VScom high performance real tty driver
file:///L|/Web-Daten/VisionSystems_NEW/produkte/datasheet_html/4439_data.html (2 von 3)24.07.2006 12:46:26
Vision Systems GmbH - VScom 200I-SI UPCI
div.UNIX
configuration instructions
Ordering Information
VScom 200I-SI UPCI, CD, English documentation
Art.No
4439
Product Name
VScom 200I-SI UPCI
Packing list
VScom 200I-SI UPCI card
CD, English documentation
>Back to top
Full size product image
>Back to top
file:///L|/Web-Daten/VisionSystems_NEW/produkte/datasheet_html/4439_data.html (3 von 3)24.07.2006 12:46:26
Download PDF
Similar pages