CS DVD 360
OWNER's MANUAL
Mobile Video System
IR
REL
COMPACT
DIGITAL AUDIO
RESET
TA/AF
E O N
VOL-
DOLBY
DIGITAL
SEL
COMPACT
VOL+
BND
DIGITAL VIDEO
AUX IN
PTY
MOD
CAR DVD/VCD/CD/MP3/MPEG4 PLAYER
MU
PWR
DVD/RECEIVER CONTROL
POWER
MUTE
REPEAT
MENU
MODE
PLAY/PAUSE
STOP
ANGLE
MO/ST
EQ
CLK
LO/DX
OSD
ENTER
BAND
TITLE/PBC
A/PS
VOL
TOP
VOL
RDM
1
4
INT
2
3
5
6
SEL
7
8
9
SETUP
GOTO
+10
0
MOTORIZED SLIDE DOWN AND DETACHABLE PANEL
3.6 INCH W IDE TFT COLOR MONITOR
CAR DVD/VCD/CD/MP3 PLAYER
FM- RDS DIGITAL PLL TUNING RADIO
MPEG4 PLAYER
USB CONNECT
CONTENTS
Safety Information...................................................................................... 2
Disc Notes ................................................................................................. 3
Installation ................................................................................................. 4
Change Angle .............................................................................................7
Electric Connection ....................................................................................8
Remote Control .......................................................................................... 9
Basic Operation ........................................................................................11
AUX Operation ....................................................................................... 15
MP3/WMA/JPEG Disc Play .....................................................................16
MPEG4 Player .........................................................................................16
TFT Monitor Operation ............................................................................17
Rear View Camera .................................................................................17
USB Operation .......................................................................................18
On-Screen Display Function ...................................................................18
Multi-Audio Language Function .............................................................. 19
Multi-Subtitle Language Function ........................................................... 19
Multi-Angle Function ............................................................................. 19
Title Menu Function ............................................................................... 19
Setup .........................................................................................................20
General Setup ........................................................................................20
Speaker Setup ....................................................................................... 22
Dolby Digital Setup ................................................................................ 22
Preferences Setup ................................................................................. 23
Defaults Table ........................................................................................24
Specifications ........................................................................................... 25
Trouble Shooting ...................................................................................... 26
1
SAFETY INFORMATION
CAUTION:
THIS DVD PLAYER IS A CLASS I LASER PRODUCT. HOWEVER THIS DVD
PLAYER USES A VISIBLE/INVISIBLE LASER BEAM WHICH COULD CAUSE .
HAZARDOUS RADIATION EXPOSURE IF DIRECTED. BE SURE TO OPERATE
THE DVD PLAYER CORRECTLY AS INSTRUCTED.
USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF
PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN
HAZARDOUS RADIATION EXPOSURE.DO NOT OPEN COVERS AND DO NOT
REPAIR YOURSELF. REFER SERVICING TO QUALIFIED PERSONNEL.
WARNING:
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS
EQUIPMENT TO RAIN OR MOISTURE.
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, AND ANNOYING
INTERFERENCE, USE ONLY THE RECOMMENDED ACCESSORIES.
THIS DEVICE IS INTENDED FOR CONTINUOUS OPERATION.
This product incorporates copyright protection technology that is protected
by method claims of certain U.S. Patents and other intellectual property rights
owned by Macrovision Corporation and other rights owners.Use of this
copyright protection technology must be authorized by Macro vision Corporation,
and is intended for home and other limited viewing uses only unless
otherwise authorized by Macrovision Corporation. Reverse engineering or
disassembly is prohibited.
REGION MANAGEMENT INFORMATION:
This DVD Player is designed and manufactured to respond to the Region
Management Information that is recorded on a DVD disc. If the Region number
described on the DVD disc does not correspond to the Region number of this
DVD Player, this DVD Player cannot play this disc.
2
DISC NOTES
Disc formats supported by this
player
VIDEO
MP
CD-RW
3
unusable) depending on your handle it
and conditions in the usage environment.
Note these scratches are not an
indication of any problem with the player.
DVD
12 cm disc
(Single-sided disc only)
Video CD
12 cm disc
CD
12 cm disc
MP3
12 cm disc
Label side
up
Do not touch
the
underside
of the disc
Do not
bend
Discs which cannot be played
with this player
DVD-ROM
DVD-R/DVD-RAM
CDV
CD-G
Wipe the disc from
center
toward the outside
edge
Handling and Cleaning
Preparing New Discs with Rough
Spots
Dirt, dust, scratches and warping disc
will cause misoperation.
Do not place stickers or make
scratches on discs.
Do not warp discs.
A disc should always be kept in its
case when not in use to prevent from
damaging.
Do not place discs in the following
places:
1.Direct sunlight
2.Dirty, dusty and damp areas
3.Near car heaters
4.On the seats or dashboard
A new disc may have rough edges on
its inside and outside edges.If a disc
with rough edges is used, the proper
setting will not be performed and the
player will not play the disc.Therefore,
remove the rough edges in advance
by using a ball point pen or pencil as
shown on the right.To remove the
rough edges, press the s i d e o f t h e pen
or pencil against the inside and outside
edges of the disc.
Rough spots
on
outside edge
Disc Cleaning
Use a dry soft cloth to wipe the surface.
If the disc is quite dirty, use a soft cloth
slightly moistured with isopropyl (rubbing)
alcohol. Never use solvents such as
benzine, thinner or conventional record
cleaners as they may mar the surface of
the disc.
Note:
A disc may become somewhat scratched
(although not enough to make it
3
Ball point pen
or pencil
Rough spots
on inside
edge
INSTALLATION
NOTES:
Choose the mounting location where the unit will not interfere with the normal
driving function of the driver.
Before finally installing the unit, connect the wiring temporarily and make sure
it is all connected up properly and the unit and the system work properly.
Use only the parts included with the unit to ensure proper installation. The use
of unauthorized parts can cause malfunctions.
Consult with your nearest dealer if installation requires the drilling of holes or
other modifications of the vehicle.
Install the unit where it does not get in the driver ' s way and cannot injure the
passenger if there is a sudden stop, like an emergency stop.
If installation angle exceeds 30 from horizontal, the unit might not give its
optimum performance.
30
Avoid installing the unit where it would be subject to high temperature, such
as from direct sunlight, or from hot air, from the heater, or where it would be
subject to dust, dirt or excessive vibration.
DIN FRONT/REAR-MOUNT
This unit can be properly installed either from "Front"(conventional DIN
Front-mount) or "Rear"(DIN Rear-mount installation, utilizing threaded
screw holes at the sides of the unit chassis). For details, refer to the following
illustrated installation methods.
4
INSTALLATION
DASH BOARD
HEX NUT
METAL MOUNTING
STRAP
SPRING WASHER
CONSOLE
PLAIN WASHER
SLIDE BRACKET
HOUSING
TAPPING SCREW
HEX BOLT
KEY PLATE
PLASTIC COVER
KEY PLATE
If you want to take CHASSIS out of the SLIDE BRACKET HOUSING,
first remove the PLASTIC COVER of the both sides away, then insert
the two KEY PLATE into left and right side of chassis as above illustration.
5
INSTALLATION
How To Remove And Install The Front Panel
When detaching or attaching the control panel, be careful not to damage the
connectors on the back of the control panel and on the panel holder.
Detaching The Control Panel
Before detaching the control panel, be sure to turn off the power.
1.Press the release button and the left hand side of the front panel will release.
(FIG. 1)
2.Pull-off the front panel (FIG. 2) and keep the front panel into the case (FIG. 3)
Install The Front Panel
First insert the right hand side of the front panel into the housing of the unit , then
push the left hand side of the front panel and make sure the panel is properly
installed(FIG.4),and then press the PWR button (2) briefly to switch the device ON.
FRONT PANEL
FRONT PANEL
RELEASE BUTTON
FIG.1
FIG.2
PROTECTIVE CASE
Installing The Front Panel
FRONT PANEL
FIG.3
FIG.4
6
CHAGNE ANGLE
CHANGING THE CONTROL PANEL ANGLE
When you want to change the viewing angle of the operating unit to play,
you can press the (angle)button repeatedly to select the desired angle
as follows:
Angle 1
Angle 2
Angle 4
Angle 3
Caution:
Do not insert your finger behind the control panel.
7
ELECTRIC CONNECTION
WIRING CONNECTION
MAIN UNIT
WHITE
GREEN
ISO CONNECTOR
YELLOW
AUX(optional)
ANTENNA CONNECTOR
RCA CABLE
IGNITION
SWITCH(B+)
RED
MEMORY YELLOW
BACK-UP(B+)
GROUND(B-)
REAR RCA OUTPUT
CABLE (optional)
CHOKE
BOX
FRONT RCA OUTPUT
CABLE
BLACK
(B+)12V
REAR CAMERA SWITCH
(B-)PARKING BRAKE
REAR CAMERA INPUT
VIDEO IN YELLOW
RCH IN RED
LCH IN WHITE
GREY SUBWOOFER
VIDEO OUT 2 YELLOW
COAXIAL OUT BROWN
RCH RED
LCH WHITE
FRONT RCA RED R
VIDEO OUT 1 YELLOW
FRONT RCA WHITE L
(FOR RCA LINE OUT VERSION ONLY)
AUTO
ANTENNA
FUSE
BLUE
FRONT
Lch SPK.
REAR
Lch SPK.
WHITE
GREY
WHITE/BLACK
GREY/BLACK
GREEN
VIOLET
GREEN/BLACK
VIOLET/BLACK
FRONT
Rch SPK.
REAR
Rch SPK.
Note:
the earth connection cable (parking brake B-) must be connected in order for DVD
pictures to be played back to the monitor. If the cable has not been correctly
connected, the message “PARKING BRAKE” appears on the monitor.
8
REMOTE CONTROL
DVD/RECEIVER CONTROL
15
POWER
17
7
2
PLAY/PAUSE
STOP
ANGLE
MO/ST
13
MENU
MODE
EQ
14
18
10
4
21
10. SEL
11. VOL+/VOL12.
/ / /
13.MENU
SUB WOOFER
14.BAND(OSD)
15.POWER
16.PLAY/PAUSE
17.MUTE
18.TITLE/PBC
(A/P)
19.
20.ANGLE
21.EQ
22.
/
23.ENTER
24. Radio Preset
25. 0-9
26.+10
1
23
ENTER
BAND
9
TITLE/PBC
A/PS
VOL
TOP
VOL
RDM
12
INT
2
3
4
5
6
SEL
7
8
9
SETUP
GOTO
+10
0
8
7. REPEAT
8. GOTO
9.
/
CLK
LO/DX
1
6. SUBTITLE
LO/DX
5
20
OSD
11
1 . CLK
2. MODE
3. STOP
4. SETUP
5. MO/ST(AUDIO)
16
3
19
6
22
MUTE
REPEAT
24
25
26
Press it briefly to show/hide the clock, press longer to set the time.
Press it to change between RADIO ,DISC and AUX IN mode.
Press it to stop playback.
Display the SETUP menu.
In radio mode, press it to select STEREO or MONO mode (In disc
mode,press it to changing of the AUDIO soundtrack on multiaudio soundtrack DVD disc. Changing of the sound mode of the
VCD/CD disc)
Changing of the SUBTITLE language on multi-subtitle language
DVD disc. In radio mode,.Press this button for distance reception
when you are located at weak signal location, depress it for
stronger signal.
Switch the Repeat mode of DVD/VCD/CD/MP3 disc.
Disc search button, cooperatively used with numeric buttons
Press
to skip to the next track & press
to skip back one track.
(Note: In DVD mode, press continually the twice to skip back one)
Press it repeatedly to change mode through volume ,bass, treble,
balance, fader ,color, bright, contrast and tint modes.
Press it to adjust volume level
In case of the SETUP MENU mode, / / / buttons served as
cursor buttons to select item left/right,ahead/back.
Press it briefly to display the main menu of the DVD/VCD. Press it
long to switch the SUBWOOFER ON and OFF.
Display statistical disc information during playback (To change
the band in radio stations)
Press it to turn on the unit ,press it again to turn off.
In DISC mode, starting playback, stopping picture/track. In Radio
mode, PTY selection of the program type.
Press it to mute down sound.
Display the TITLE menu that is stored in DVD disc changing
between PBC ON and PBC OFF on the VCD disc.(Auto store
and preset scan function in radio stations .)
Press it to change the view angle of the front panel .
Changing of the view angle on multi-angle DVD disc.
Press it to turn to equalization function.
Press
to start forward rapidly &
to reverse rapidly.
Confirm the Track/Chapter selected with the number key or
selected with the cursor buttons on TV screen.
Six preset memory buttons.
Numeric buttons. In radio mode, 0 and 9 act as TA/AF.
Tens digit select button, cooperatively used with numeric buttons.
9
REMOTE CONTROL
Preparing the Remote Control
Inserting the Batteries
1.First push to inside as the direction indicated by the arrow (See 1 )And then
Remove the battery holder as the direction indicated by the arrow (See 2 ).
2.Replace the battery Set a new battery property with (+)side up as illustrated
(See 3 ).
3.Insert the battery holder. Push in the holder to the original position(See 4 ).
Using the Remote Control
Face the remote control towards the player front face IR mark (remote control signal
receiver).
Operation angle: About
30 degree in each the direction of the front of the IR mark.
10
BASIC OPERATION
1
3 14 15
11
18
IR
REL
6 13
COMPACT
DIGITAL AUDIO
RESET
TA/AF
E O N
VOL-
4
DOLBY
DIGITAL
SEL
COMPACT
VOL+
BND
DIGITAL VIDEO
7
AUX IN
PTY
MOD
MU
CAR DVD/VCD/CD/MP3/MPEG4 PLAYER
PWR
5
9 12 16
17
8
2 10
1.REL BUTTON
Press the REL button to detach the removable front panel.
2.PWR On/Off BUTTON
Press this button to switch the device on. WELCOME appears in the display.
Press it again to switch the device off. SEE YOU appears in the display.
3-4 .VOL+/VOL- & SEL BUTTON
Press SEL button briefly to across the sound/picture mode selection menu
by repeatedly pressing the SEL button you can select the individual menu items
such as volume, bass, treble, balance, fader, color, bright, contrast and tint .
Then rotate the VOL + / - to adjust the selected mode.
(The corresponding value will show on the display.)
When mode has not been adjusted for several seconds, display returns to normal
radio or CD display.
Volume
Bass
Treble
Balance
Fader
Tint
Contrast
Bright
Color
A.Volume: Adjust volume level by using VOL + / - button.
Note: The unit is initially set to volume mode.
B.Bass: Press SEL button one time. Adjust bass level by using VOL + / - button.
C.Treble: Press SEL button two times. Adjust treble level by using VOL + / -button.
D.Balance: Press SEL button three times. Adjust sound balance between left
and right speakers by using VOL + / VOL - button.
E.Fader: Press SEL button four times. Adjust sound balance between front and
rear speakers by using VOL + / VOL - button.
( NOTE : the function of the Color, Bright, Contrast and Tint. Please see 17 page.)
5 . BAND BUTTON
In RADIO mode, press the BAND button on the front panel or on the remote
controller to select your desired radio band and word which band is selected
will be displayed in the TFT . Press it to change the bands as below :
FM
MW
LW
For 3 Bands (Europe)
FM
MW
For 2 Bands (Europe)
11
FM
AM
For 2 Bands (USA)
BASIC OPERATION
6. TA/AF BUTTON
.
TA Function [traffic Announcement] Button(for Rds Only)
In RADIO mode
When swing the SEL knob briefly in the TA/AF direction, it is activated as
TA mode ON or OFF.
During radio operation in one FM frequency band the search for a traffic announcement station is started automatically (TA SEEK) .
If an FM station is being received which transmits the latest traffic announcements
from time to time, the TP display lights up.
If an FM station is being received which transmits the latest traffic announcements
automatically interrupt CD operation(the word TRAFFIC appears in the display).
The volume level is increased to the minimum value for the transmission of traffic
announcements. After the traffic announcements has finished, the programe that
was previously running is resumed.
AF [Alternative Frequencies]
When swing the SEL knob in the TA/AF direction and keep more than 2 seconds,
it is activated as AF mode ON or OFF .
Segment off: AF switching mode off.
Segment on: AF switching mode on, the radio continuously tests the signal strength of the AF frequency. Whenever the new AF frequency is stronger than the station that is currently tuned in, the radio switches to this frequency for a short time
and the message “NEW FREQUENCY” is displayed for one to two seconds.
Segment flashing: AF switching mode is selected, but RDS information is not
received yet.
When press the SEL button for a longer time to access the selection menu:
REG ON/ REG OFF, PI MUTE/PI SOUND, AF OFF/ AF ON.
Regional mode ON
PI CODE is checked when AF CHECK in progress
Regional mode OFF
PI CODE and COVERAGE AREA is not checked when AF check in progress.
7. APS/DISP BUTTON
In Radio Mode:
a) Memory function:
swing the SEL knob in the direction of APS/DISP for approximately 2 seconds
to active automatic station storage. The radio searches within the current
frequency band, e.g. FM1, for the strongest station are then allocated to the
corresponding storage locations. Then the station of the first storage location
is set. If you would like to search for more stations in the FM band, press the BND
button(5) in order to change to the Fm2 or Fm3 band. Swing the SEL button (4)
again in the APS/DISP direction for about 2 seconds to continue search.
b) Scan Function:
if the SEL knob is moved briefly in the direction of APS/DISP, the radio briefly
plays all the preset stations of the frequency band. (The scan function ends
automatically at the first storage location of frequency band Fm1.)
In Disc Mode:
swing the SEL knob briefly in the direction of the APS/DISP on the front panel ,
the playback picture (the monitor on the unit only) will not to be shown, only the
audio will be heard. (Swing it again to resume the playback picture mode.) You
can press SEL knob briefly to select the “BG COLOR” by repeatedly pressing the
SEL knob, then rotate the VOL+/- to select the background color among of the
“AUTO, BG COLOR: 01........BG COLOR: 11”, in “ AUTO” mode, the monitor of
unit will change the background color automatically.
12
BASIC OPERATION
8. MU BUTTON
Press it button to switch of the loudspeakers for a short period. The word MUTE
flashes in the display. Press it again to cancel the mute function. This function
can also be cancelled by rotating the VOL multifunction button.
9.
(ANGLE)BUTTON
you can change the viewing angle of the operating unit . Press this button up to
four times in order to select the desired position.
10.
/PTY BUTTON
Pressing
during playback will stop play temporary. Return to normal playback,
press
once again.
PTY(PROGRAM TYPE) FUNCTION
In RADIO mode :
Continuous press this button, you can select the PTY type as bellow:
NEWS ,AFFAIRS,INFO,SPORT,EDUCATE,DRAMR,CUL TURE,SCIENCE
VARIED,POP M,ROCK M. EASY M, LIGHT M, CLASSICS, OTHER M, WEATHER
FINRNCE,CHILDREN,SOCIAL, RELIGION,PHONE IN , TRAVEL , LEISURE
JAZZ, COUNTRY, NATION M, OLDIES,FOLK M,DOCUMENT,TEST,ALRRM.
When PTY is selected, the radio starts to search corresponding PTY information
(PTY SEEK), and stops if the corresponding PTY information is detected.
If corresponding PTY information is not existed any more, PTY type is
automatically exit to normal mode.
11.
/
BUTTONS (TUNE, SEEK, TRACK, SKIP UP/DOWN)
a) In DISC, USB mode:
if you wish to jump forwards or backwards press the SEL button (4) briefly in
the or direction. (Note: in DVD mode, press the SEL button continually
twice in direction to skip back one track during playback.)
Note:For some VCD 2.0 dics(PBC-playback control),
and
buttons may
be unavailable.
To wind through the tracks keep the SEL button pressed in the or direction
for about 2 seconds. FF X2 appears in the display. Operating the SEL button
again, the speed of rapid forward/reverse changes according to the disc
as follow:
DVD/VCD/CD/MP3:
Normal Playback 2x
4x
8x
16x
b) In Radio Mode:
Move the SEL button in the direction of
or
in order to set a radio station
manually. Keep the SEL taste pressed down in the
or
direction in order to
start the search for a radio station automatically.
12. MOD BUTTON
Press it repeatedly to select AUX IN , RADIO and DISC mode.
During the USB playback, you can press STOP button and then press GOTO
button to select the DISC mode.
13
BASIC OPERATION
13.
(EJECT) BUTTON
Press this button to insert and eject the Disc . The operating unit swings downwards. Insert the Disc with the labelled side facing upwards gently into the CD
slot until the device draws in the CD/DVD automatically. The operating unit will
automatically swings back to the normal position.
14. RESET BUTTON
RESET button is placed on the housing and must be activated with either a
ballpoint pen or thin metal object. The RESET button is to be activated for the
following reasons:
A. Initial installation of the unit when all wiring is completed.
B. All the function buttons do not operate.
C. Error symbol on the display.
15. IR (infrared)
Sensor for the remote control.
16. AUX IN SOCKET
T he operation of the AUX , please see page 15.
17. USB CONNECT LINE SOCKET
The operation of the USB, please see page 18.
18. TFT Display (liquid crystal display)
The operation of the TFT, please see page 17.
TOP/RPT/INT/RDM FUNCTION (Only for the RC.)
A.To memorize the current frequency, press any one of the six preset buttons[1-6]
on the remote controller hold for more than 2 seconds.
B.To recall the preset memory, press one of the preset buttons [1-6].
C.Press 1/(TOP) button to select the first track/chapter to play.
a. In the state of VCD/CD/MP3 disc playing, press the button to select the
first track/chapter to play.(depend on the disc used for VCD)
b. In the state of DVD disc playing, the 1TOP button is not available.
D.Press REPEAT button briefly to select repeat mode as follow.
VCD/CD/MP3:
DVD:
CHAPTER REPEAT ON
TITLE REPEAT ON
REP-ONE
REP-ALL
REPEAT ALL
a. Continuously repeat at the current chapter/track, when selected
REP-ONE mode.
b. Select REP-ALL mode to continuously repeat all chapter/track on the
current disc.
c. REPEAT feature does not support VCD2.0 (with PBC ON).
14
BASIC OPERATION
E.Long Press 3/(INT) button to scan disc.
a. In the state of CD disc playing,press the 3/INT button to play the previous 6
seconds part of each track/chapter on disc.(depend on the disc used for VCD)
b. In the state of Mp3 disc playing, the 3/INT button is not available.
c. In the state of VCD disc playing , long press the 3/INT button, the screen will
display as follow (long press it again will release this mode.):
SELECT DIGEST TYPE:
TRACK DIGEST
DISC INTERVAL
TRACK INTERVAL
1). you can use the / / / buttons on the remote control to select the item,
and then press the ENTER button to confirm .
2). In Track Digest OR Disc/Track Interval MODE.
You can use the
/ / / buttons to select the items ,and then press the
ENTER to confirm .
You can also select the items using the corresponding number buttons, and
then press the ENTER to confirm .
d. In the state of DVD disc playing , long press the 3/INT button, the screen will
display as follow (long press it again will release this mode.):
SELECT DIGEST TYPE:
TITLE DIGEST
CHAPTER DIGEST
TITLE INTERVAL
CHAPTER INTERVAL
1). you can use the / / / buttons on the remote control to select the item,
and then press the ENTER button to confirm .
2). In Title/Chapter Digest OR Title/Chapter Interval MODE.
You can use the / / / buttons to select the items ,and then press the
ENTER to confirm .
You can also select the items using the corresponding number buttons, and
then press the ENTER to confirm .
F. Long Press 4/(RDM) to play disc in random.
In the DVD/VCD/CD/MP3 disc playing, press the 4/RDM button on the front
panel to play in random (depend on the disc used for VCD).
AUX IN Socket (16)
To connect analogue replay devices. Use this jack to replay sound of other replay
equipment such as DVD players, computers, etc. Via the loudspeakers.
1). Please connect the external device with stereo jack plug the AUX IN socket.
2). Press the MOD button to select the AUX IN connection.
3). Rotate the VOL+/- to adjust the volume level.
15
BASIC OPERATION
MP3/WMA/JPEG DISC PLAY
1.When inserting an MP3/WMA/JPEG disc.
Ex: When Mp3 file is detected.
4
3
00:56
2
003/112
5
6
04:07
1 .Current track(file)(highlighted bar)
2 .Current track (file) number/total
Repeat one
3
1
Mp3
K
Mp3
woman 1
Mp3
new ton
P
4
5
6
....... .......
number of tracks(files) in the current
folder.
.Elapsed playing time of the current
track( not available for JPEG disc)
.total playing time. ( not available for
JPEG disc)
.Selected playback mode
.Operation mode icon.
(Play),
(stop), (pause), (forward)
(reverse).
In stop mode , use / / / on the remote control to select the item or folder,
then press ENTER button to confirm.
Pressing REPEAT button repeatedly can select two kinds of repeat play mode.
2.REP-ONE:
Play the same song over and over again.
3.REP ALL:
Play all songs in the discover and over again.
In the playback, use
or
to skip an item ahead or back.
In the playback, face right or left swing the SEL knob
/
button on the front
panel and keep more than 2 seconds or short press
on the remote control
/
to rapid forward/reverse.
MPEG4 DISC PLAY
MPEG4 disc is playing as the format
of FILE . For example:
00:56
04:07
Repeat one
001/001
In stop mode , use / / / on the
remote control to select the item ,
then press ENTER button to confirm.
MAY-AUG
Pressing REPEAT button repeatedly can
C14-Long-fright
select three kinds of repeat play mode.
REP-ONE:
....... .......
Play the same song over and over again.
REPEAT ALL:
Play all songs in the current directory in sequence, over and over again.
DISC REPEAT:
Play all songs in the discover and over again.
In the playback, use
or
to skip an item ahead or back.
In the playback, face right or left swing the SEL knob
/
button on the front
panel and keep more than 2 seconds or short press
/ on the remote control to
rapid forward/reverse.
16
BASIC OPERATION
TFT MONITOR OPERATION
Press SEL button briefly to across the sound/picture mode selection menu
by repeatedly pressing the SEL button you can select the individual menu items
such as volume, bass, treble, balance, fader, color, bright, contrast and tint .
Then rotate the VOL + / - to adjust the selected mode.
(The corresponding value will show on the display.)
When mode has not been adjusted for several seconds, display returns to normal
radio or CD display.
Volume
Bass
Tint
Treble
Contrast
Balance
Bright
Fader
Color
ADJUSTABLE ITEMS:
COLOR: 0 to 32
Adjust the color fo the picture-lighter or darker.
BRIGHT: 0 to 32
Adjust if the picture is too bright or too dark.
CONTRAST: 0 to 32
Adjust the contrast of the bright ans dark portion.
TINT: 0 to 32
Adjust the tint if the human skin color is unnatural.
-Adjustable when “NTSC “ is selected for “ NTSC/PAL “ .
(The function of the VOLUME, BASS, TREBLE, BALANCE and FADER, Please
see page 11.)
REAR VIEW CAMERA
When connecting the rear view camera.the mirror image of the rear view through
the rear view camera is automatically displayed on the monitor when you change
the gear to the back position.(The monitor on the unit only.)
NOTE(for the brake function)
if the parking brake is not engaged,“parking brake” flashes on the monitor,
and no playback picture will be shown. Only the audio will be heard.
-This warning appears only when the parking brake wire is connected to the parking
brake system built in the car. (See page .8)
17
BASIC OPERATION
USB Operation
On-Screen Display Function
A.Plug the USB connect line to the USB
socket (see number 17) of the unit
properly,(See fig.1) when the USB
appliance connect to the USB port of
the connect line, the system star
playing track of the USB appliance
automatically.
B. IN USB playing , you can press the
cursor button to select the item.Then
press ENTER button to playing.
also press numeric to play the
corresponding track directly. Press
the
/
button to skip to the next
track or skip to the back one track
Press the / button to fast forward
or fast reverse.
Press the REPEAT button to select
repeat play mode.
You can press the EJECT button to
eject the disc or insert the disc into
the compartment.
When insert the disc, the unit will
play the disc automatically .
C.In USB mode(when the disc in the unit)
Press the STOP button once , and
then press the GOTO button, the unit
will change the DISC mode to play,
In DVD/VCD/CD mode,
Press the STOP button twice, and
then press the GOTO button, the unit
will change the USB mode to play
In MP3 mode,
press the STOP button once, and
then press the GOTO button, the unit
will change the USB mode to play.
Note:
a:To prevent damage to the USB ,
during the playback don`t pull out.
b:In the state of the DISC playing ,
Best to pull out the USB.
Press the OSD button during playback
to display the contents of the current
disc on the screen.
A.Example for DVD:
a.Press OSD for the first time:
TITLE ELAPSED
TT 01/01 CH 01/38
0:02:06
Title Number, Total Title Number,
Chapter Number, Total Chapter
Number of this Title of the disc
currently being played will be shown
on the screen,along with the elapsed
time.
b.Press OSD for the second time:
TITLE REMAIN
TT 01/01 CH 01/38
3:24:36
c.Press OSD for the third time:
CHAPTER ELAPSED
TT 01/01 CH 01/38 0:02:56
d.Press OSD for the fourth time:
CHAPTER REMAIN
TT 01/01 CH 01/38
0:04:32
e.Press OSD for the fifth time:
The message on the screen will be
cleared.
B.Example for VCD/SVCD/CD:
a.Press OSD for the first time:
SINGLE ELAPSED
TRACK 01/16
00:49
b.Press OSD for the second time:
SINGLE REMAIN
TRACK 01/16
02:45
c.Press OSD for the third time:
TOTAL ELAPSED
TRACK 01/16
00:60
d.Press OSD for the fourth time:
USB port
TOTAL REMAIN
(USB connect line)
TRACK 01/16
(Fig.1)
18
78:46
BASIC OPERATION
Notes:
- The language number is different
according to the disc.
- Some discs only contain one subtitle
language.
- When no different subtitle language
are recorded,
will be displayed
at screen left top corner.
e.Press OSD for the fifth time:
The message on the screen will be
cleared for SVCD and VCD.
C.Example for MP3:
Each time OSD is pressed, the
message displayed on screen changes
as follows:
SINGLE ELAPSED
SINGLE REMAIN
Multi-angle Function
(for DVD Only)
Multi-audio Language Function
Press ANGLE during playback. Each
time the button is pressed, number of
the angle changes in sequential order.
Notes:
- The angle number is different
according to the disc.
- The function only work for disc having
scenes recorded at different angles.
- When no different angle are recorded,
will be displayed at screen left top
corner.
For DVD:
Press AUDIO during playback.
Each time the button is pressed,
number of the audio soundtrack
language changes on sequential order.
NOTES:
- The language number is different
according to the disc.
- Some disc only contain one language
soundtrack
- When no different language
soundtrack are recorded
will be
display at screen left top corner.
For VCD/CD:
Press AUDIO during playback. It is
possible to switch the sound between
monaural and stereo sound.
MONO LEFT
MONO RIGHT
MIX-MONO
STEREO
Title Menu Function
For DVD:
If the DVD has multiple titles recorded
on the disc. It can select preferred title
from the title menu to start playback.
- Press TITLE during playback.The title
menu is display.
- Press the cursor button shown in TV
screen, select preferred title by the
cursor button and confirmed by
ENTER key.
For VCD:
Press TITLE/PBC button on the remote
control while the disc is playing, you can
switch between "PBC on"and "PBC off"
mode.
Multi-subtitle Language Function
(for DVD Only)
Press SUBTITLE during playback.
Each time the button is pressed, number of
the subtitle language changes in
sequential order.
19
SETUP
GENERAL SETUP
--- GENERAL PAGE --DOLBY
DOLBY
-----General setup page----
-----General setup page---TV Display
LB
TV Display
Normal/PS
Angle Mark
ON
Angle Mark
Normal/LB
OSD Lang
ENG
OSD Lang
Wide
Spdif Output
SPDIF/RAW
Spdif Output
Captions
ON
Captions
Screen Saver
ON
Screen Saver
Last Memory
ON
Last Memory
Set TV Display Mode
Go To General Setup Page
TV Screen
1. Press SETUP button on the remote
control .
2.The SETUP menu is displayed.
3.Select the preferred item by using the
/ / /
buttons
4.Press ENTER button.
a.GENERAL SETUP
This setup page includes the item
of TV display & audio output feature.
The detail please refer to
GENERAL SETUP MENU.
b.SPEAKER SETUP
This is to activate the audio output
from DOLBY AC3 5.1 DOWNMIX
to 2 channel mode. Please refer to
SPEAKER SETUP MENU.
c.DOLBY DIGITAL SETUP
Please refer to DOLBY DIGITAL
SETUP.
d.PREFERENCE SETUP
This setup page includes all the
configuration of support feature.
The detail please refer to
PREFERENCES SETUP MENU.
Video
Material
Wide(16:9)
Normal
Pan Scan
Letter-box
4:3
1.TV DISPLAY SETUP
This is to select the appropriate TV
aspect (4:3 or 16:9) according to the
connected TV set.
Normal/PS (For 4:3 TV)
Played back in the PAN & SCAN style.
(If connected to wide-screen TV, the
left and right edges are cut off.)
Normal/LB (For 4:3 TV)
Played back in letterbox style.
(If connected to wide-screen TV, black
bands appear at top and bottom of the
screen.)
Wide (For 16:9 TV)
Select when a wide-screen TV set is
connected.
20
SETUP
DOLBY
DOLBY
-----General setup page----
-----General setup page----
TV Display
TV Display
Angle Mark
ON
Angle Mark
OSD Lang
OFF
Osd Lang
Spdif Output
Spdif Output
Captions
Captions
Screen Saver
Screen Saver
Last Memory
Last Memory
SPDIF OFF
SPDIF/RAW
SPDIF/PCM
Set Angle Mark
Setup SPDIF
2. ANGLE MARK DISPLAY SETUP
If it is set to ON, when the multi-angle
DVD disc is playing,
(the angle
mark) will appears on the screen; if is
set to OFF, the mark will not appear.
4.SPDIF OUTPUT
This is to activate the audio output
from SPDIF OFF mode to SPDIF/RAW
mode to SPDIF/PCM mode.
DOLBY
DOLBY
-----General setup page----
-----General setup page---TV Display
TV Display
Angle Mark
English
Angle Mark
OSD Lang
French
OSD Lang
Spdif Output
German
Spdif Output
ON
Captions
Spanish
Captions
OFF
Screen Saver
Italian
Screen Saver
Last Memory
Portuguese
Last Memory
Closed Caption
Set OSD Language
5.CAPTIONS SETUP
3.OSD LANG TYPE SETUP
Activate the CAPTIONS feature by
selecting ON. And release this feature by selecting OFF.
Select the preferred OSD language
by using the / buttons.
21
SETUP
SPEAKER SETUP
DOLBY
--- SPEAKER SETUP PAGE --DOLBY
-----General setup page---TV Display
-----Speaker Setup Page----
Angle Mark
OSDLang
DOWNMIX
Spdif Output
LT/RT
STEREO
Captions
Screen Saver
ON
Last Memory
OFF
Set Downmix Mode
Screen Saver
This is to activate the audio output from
DOLBY AC3 5.1 DOWNMIX to 2 channel
mode. Select the preferred SPEAKER
connection by using the cursor buttons.
Select the LT/RT to activate the Dolby
surround compatible output.
Select the STEREO to activate simple
stereo mode.
6.SCR SAVER SETUP
Select the SCR SAVER output
ON/OFF.
DOLBY DIGITAL SETUP
DOLBY
-----General setup page----
DOLBY
TV Display
-----Dolby Digital Setup----
Angle Mark
FULL
OSD Lang
6/8
Spdif Output
DYNAMIC
Captions
4/8
Screen Saver
ON
2/8
Last Memory
OFF
OFF
Set Last Memory State
Set DRC OFF
DYNAMIC RANGE CONTROL
7.LAST MEMORY SETUP
Select DRC and adjust the dynamic
range of a Doby Digital encoded
program. There are 8 steps between
full compression and off compression.
Select the LAST MEMORY output
ON/OFF.
22
SETUP
PREFERENCES SETUP
--- PREFERENCES PAGE --DOLBY
DOLBY
-----Preference Page----
-----Preference Page----
TV Type
PAL
TV Type
Audio
AUTO
Audio
French
Subtitle
NTSC
Subtitle
Spanish
Disc Menu
Disc Menu
German
Parental
Parental
Password
Password
Default
Default
This player can play discs recorded
in either PAL or NTSC format.Select
NTSC format, when you connected to
NTSC TV.Select PAL format, when
you connected to PAL TV.Select AUTO
format, the player TV output format
will according to the DVD disc format..
DOLBY
English
French
Spanish
German
Parental
Password
OFF
3.SUBTITLE LANGUAGE SETUP
Select the preferred SUBTITLE
language by using the cursor buttons.
DOLBY
TV Type
TV Type
Disc Menu
Portuguese
-----Preference Page----
-----Preference Page----
Subtitle
Italian
Preferred Subtitle Language
Set TV standard
1.TV TYPE SETUP
Audio
English
Italian
Audio
English
Subtitle
French
Disc Menu
Spanish
Parental
German
Password
Italian
Default
Portuguese
Portuguese
Preferred Menu Language
Default
4.DISC MENU LANGUAGE SETUP
Preferred Audio Language
Select the preferred DISC MENU
language by using the cursor
buttons.
2.AUDIO LANGUAGE SETUP
Select the preferred AUDIO soundtrack by using the cursor buttons.
23
SETUP
DOLBY
DOLBY
-----Preference Page----
-----Preference Page----
TV Type
1KID SAF
TV Type
Audio
2G
Audio
3PG
Subtitle
4PG13
Disc Menu
5PGR
Parental
Subtitle
Disc Menu
Parental
Password
Default
6R
Password
7NC 17
Default
RESET
8 ADULT
OFF
Load Fcatory Setting
7.DEFAULTS
Set Parental Control
Select reset to become factory initial
setting.
5.PARENTAL
Select suitable parental guidance by
the cursor buttons and conformed by
pressing ENTER button.
DEFAULTS TABLE
DOLBY
-----Preference Page----
TV DISPLAY
NORMAL/LB
ANGLE MARK
ON
OSD LANGUAGE
ENGLISH
Audio
SPDIF OUPUT
SPDIF/RAM
Subtitle
CAPTIONS
ON
SCR SAVER
ON
LAST MEMORY
ON
TV Type
GENERAL SETUP
Disc Menu
Parental
SPEAKER SETUP DOWNMIX
Password
CHANGE
DOLBY DIGITAL
Default
Change Password
6.PASSWORD
Select the change and press ENTER
button. Type the old password (The
initial factory code is 1379 ) and key
in 4 characters password now you
want to use, and retype again to
confirm key in correctly.
PREFERENCES
24
STEREO
DYNAMIC
OFF
TV TYPE
AUTO
AUDIO
ENGLISH
SUBTITLE
OFF
DISC MENU
ENGLISH
PARENTAL
8 ADULT
PASSWORD
1379
SPECIFICATION
Supply Voltage:
Current Consumption:
Signal System:
Discs Played:
Audio Signal Output:
Characteristics:
12V DC (11V-15V)
Less than10 A
Compositive video 1.0Vp-p 75
(1)DVD-VIDEO Disc
5"(12 cm) single-sided, single-layer
5"(12 cm) single-sided, double-layer
(2)Compact Disc (CD-DA, VIDEO CD)
5"(12cm) disc
2ch&4ch line out
(1)Frequency Response
20 Hz - 20 KHz
(2)S/N Ratio
90 dB (JIS)
(3)Wow and Flutter
Below measurable limits
FM SECTION
Frequency Coverage: ..............................................................87.5 to108 MHz
IF:
...............................................................10.7 MHz
Sensitivity (S/N = 30 dB): .........................................................15 dBu
Monitor Screen Size:
Number of Pixels:
Color System:
3.6 Inch Wide
960X234 pixels
NTSC /PAL
NOTE:Specifications and design are subject to modification, without notice,
due to improvements in technology.
22
TROUBLE SHOOTING
Before going through the check list, check wiring connection. If any of the problems
persist after check list has been made, consult your nearest service dealer.
SYMPTOM
No power
CAUSE
SOLUTION
The car ignition switch is
not on
The fuse is blown
If the power supply is properly
connected to the car accessory
terminal,switch the ignition key
to "ACC"
Replace the fuse
Presence of disc inside the Remove the disc in the player,
then put a new one
player.
Disc can not be
loaded or ejected
Inserting the disc in reverse Insert the compact disc with
the label facing upward
direction
The disc is extremely dirty Clean the disc or try to play a
new one
or defective
Temperature inside the car Cool off or until the ambient
is too high
temperature return to normal
Television/video
imageappears
black-white
The color system is
set incorrectly
The unit is not connected
No television/video to the parking brake
image appears
detection switch
The parking brake is not
engaged
No color in picture The disc format is not
accordingto the TV-set
used (PAL/NTSC)
JPEG disc can
not be played
back
No JPEG files are recorded
on the disc.
Please switch to correct color
system from menu
Make proper connection
according to “ wire connection ”
For safety reasons no television
/video images are displayed while
the vehicle is moving.
Engaging the parking brake will
cause images to be displayed.
Please the television mode of
the choice accommodation
Change the disc
JPEG files are not recorded Change the disc
Record JPEG files using a
in a compliant formant
compliant application
The built-in microcomputer Press the RESET button.
The operation keys is not operating properly
Front panel is not properly fixed
do not work
due to noise
into its place
The
antenna
cable
is
not
The radio does not
Insert the antenna cable firmly
connected
work
The signals are too weak
Select a station manually
888-J3009-00
26
Download PDF
Similar pages