Modline 7
®
Infrared Thermometers
Noncontact temperature sensors to serve
a wide range of applications
72 Series
7G Series
76 Series
75 Series
77 Series
78 Series
74 Series
400 to 3000ºC
(752 to 5432ºF)
1.0µ
300 to 2250ºC
(572 to 4082ºF)
1.6µ
100 to 600ºC
(212 to 1112ºF)
2.4µ
250 to 1100ºC
(482 to 2012ºF)
3.9µ
250 to 2250ºC
(482 to 4082ºF)
5.0µ
300 to 900ºC
(572 to 1652ºF)
7.9µ
-40 to 800ºC
(-40 to 1472ºF)
8-14µ
Semiconductor,
metals forging,
hardening and
molten glass
Ferrous, non ferrous
and unoxidized metals,
galvanizing lines and
steel annealing
Small, low temperature
targets, wire coating
and annealing,
as well as plastic
tubing extensions
Furnace refractory,
flame hardening
and brazing
Glass surface
temperatures, glass
tempering and float
glass as well as
ceramics
Ultra-thin
drawn glass
Low temperature
applications, such
as thick plastics,
food, carpeting,
coated paper and
thermoforming
Modline® 7 Highlights
Designed for rugged industrial
environments, the Modline 7
sensors have 7 different series to
choose from (72, 7G, 76, 75, 77,
78 & 74). All sensor components
are sealed within an IP65 (NEMA 4)
enclosure featuring standard
motorized focus control, as well as
through-the-lens and laser sighting.
Also included is an integral stainless
steel water cooled enclosure. The sensing head can operate as
a stand-alone sensor, providing
simultaneous analog and digital outputs of process temperatures.
Sensor setup and monitoring
can be accomplished either from
the rear panel of the Modline 7
sensor or from the ModView™ Pro
software, which allows the user to
perform PC-based sensor setup,
temperature monitoring, trending
and archiving, with an intuitive
graphical user interface.
Alarms:
A programmable relay output can be triggered by:
■ Product
Temperature
(process alarm)
■ Sensor
Internal Temperature
(sensor alarm)
■ Manually
Communications:
■ Bi-directional
RS-485
communications
■ Windows
ModView Pro
Software Field Calibration
software
Features:
■ Broad
temperature range
-40ºC to 3000ºC (-40ºF to 5432ºF)
■ Spot size down to 1mm
Performance
Accuracy
72-1716 ± (2% of reading or +2ºC)* for Tmeas < 450ºC (842ºF)
72-3030 ± (2% of reading or +2ºC)* for Tmeas < 650ºC (1202ºF)
7G-1116 ± (0.3% of reading or +2ºC)*
7G-2230 ± (0.3% of reading or +1ºC)*
76
± 1% of reading for Tmeas < 150ºC (302ºF)
75
± 2ºC or ± 2%* for Tmeas < 350ºC (662ºF) 77 / 78
± 1% of reading
74
± 2ºC for Tmeas < 0ºC (32ºF)
*whichever is greater
Repeatability
72-1716 ± (1% of reading + 1°C) for Tmeas < 450°C (842°F) 72-3030
7G
76/75
± (1% of reading + 1°C) for Tmeas < 650°C (1202°F) ± (0.1% of reading +1ºC)
± 0.5% of reading or ±0.5ºC*
± (0.3% of reading or +1ºC) for Tmeas > 450ºC (842ºF)
± (0.3% of reading or +1ºC) for Tmeas > 650ºC (1202ºF)
± 5ºC for Tmeas > 150ºC (302ºF)
± 1% of reading for Tmeas > 350ºC (662ºF)
± 1% of reading or ±1ºC)* for Tmeas > 0ºC (32ºF)
± (0.1% of reading + 1°C) for Tmeas > 450°C (842°F)
± (0.1% of reading + 1°C) for Tmeas > 650°C (1202°F)
77/78/74
*whichever is greater
Temperature Resolution
72-3030 / 7G-2230 0.2ºC
All other models
0.1ºC
Electrical
Power Supply
Outputs Analog
Digital RS-485
Relay
Display
External Input
Input Voltage
24 VDC ± 20%, 500 mA
0 - 20 mA, 4 - 20 mA, 14 bit resolution, max. current loop impedance: 500 ohms.
Networkable to 32 sensors, Baud rate: 300, 1200, 2400, 9600, 19200, 38400, 57600 (default), 115200. Data format: 8 bit, no parity, 1 stop bit, 4-wire mode (full-duplex) or 2-wire mode (half duplex), selectable via control panel or software, 2-wire: max. 38400 Baud
Contacts max. 48 V, 300 mA, response time < 2 ms, (software programmable)
5 digit backlit LCD display
0 to 5 VDC functions: trigger, ambient background temperature
compensation, emissivity setting, or laser ON/OFF switching
Environmental
Environmental rating NEMA-4 (IEC 529, IP 65)
EMI
CE compliant to IEC 61326, performance criteria B
Relative Humidity
10% to 95% non-condensing
Storage Temperature -20°C to 70°C (-4°F to 158°F)
Ambient Temperature
with integral cooling with high temperature waterjacket cooling
without cooling 5ºC to 65ºC (41ºF to 150ºF)
with air cooling 10ºC to 120ºC (50ºF to 250ºF)
with water cooling 10ºC to 175ºC (50ºF to 350ºF)
water cooled 10ºC to 315ºC (50ºF to 600ºF)
Vibration
MIL-STD-810D (IEC 68-2-6) 2G’s, 10 - 150 Hz, 3 axis
Mechanical Shock
MIL-STD-810D (IEC 68-2-27) 5G’s, 11 ms duration, 3 axis
Weight
1.95 kg (4.3 pounds)
ModView™ Pro Software
ModView Pro software with built-in user interface displays target
temperature and allows for sensor parameter adjustment to configure
or fine tune your sensor remotely. You can easily change temperature
display from ºF to ºC, set or change emissivity levels, scale the range,
focus the sensor, and turn on or off filters, such as peak hold,
valley hold, and averaging, as well as save data for future reference
or graphing. Preset alarms for early warning detection, system on/off
control or for quality record keeping.
All Modline 7 sensors include one of two cooling options
Modline 7 sensor with
integral water cooling
Modline 7 sensor with high
temperature water jacket
The Modline 7 sensor with
integral water cooling
enclosure enables use
in ambient temperatures
up to 175ºC (350ºF).
For high ambient temperature
applications, the Modline 7 with
high temperature water jacket and
integrated air purge enables use
in ambient temperatures up to
315ºC (599ºF).
Sighting eyepiece
Easy-to-Use Interface
Increase value
160 (6.3)
Laser LED
indicator
43.5 (1.71)
5.1 (0.2)
56
(2.2)
3.2 (0.13)
Next mode
M56 x 1.5
Display
mounting threads
19 (0.75)
Enter
Previous
mode
mm (inch)
Decrease value
Physical Dimensions
210.5 (8.3)
46.7 (1.84)
67.8 (2.67)
26.5 (1.04)
18.3 (0.72)
17.5
(0.69)
76
(3.0)
56
(2.2)
33 (1.3)
1/8 27 NPT
M56 x 1.5
mounting threads
mm (inch)
Modline 7 sensor with integral water cooling
and optional air purge collar
Modline 7 high temperature waterjacket
Range
Optics
Sighting Options
C
D
System Options
Cooling Options
Block A Temperature Range Spectral Range Optical Resolution Response
Time
Primary Applications
(measured at focal point)
72-1716 72-3030 400-1740ºC (752-3164ºF)
540-3000ºC (1004-5432ºF)
1.0µm
1.0µm
D/160
D/300 2ms
Semiconductor, metals forging, hardening
and molten glass
7G-1116 7G-2230 300-1100ºC (572-2012ºF)
450-2250ºC (842-4082ºF)
1.6µm
1.6µm
D/160
D/300 2ms
Ferrous, non ferrous and unoxidized metals, galvanizing lines
and steel annealing 76-0607 100-600ºC (212-1112ºF)
2.4µm
D/70
20ms
Small, low temperature targets, wire coating and annealing, as well as plastic tubing extensions
75-1107 250-1100ºC (482-2012ºF)
3.9µm
D/70
120ms
Furnace refractory, flame hardening and brazing
77-1607 77-2207 250-1650ºC (482-3002ºF)
450-2250ºC (842-4082ºF)
5.0µm
5.0µm
D/70
D/70 60ms
Glass surface temperatures, glass tempering and float glass as well as ceramics
78-0910 300-900ºC (572-1652ºF)
7.9µm
D/100
120ms
Ultra-thin drawn glass
74-0807 -40-800ºC (-40-1472ºF)
8-14µm
D/70
120ms
Low temperature applications, such as thick plastics, food, carpeting, coated paper and thermoforming
Block B Sighting Options
0
Visible/Laser Sighting
Block C System Options
0
Stand Alone Sensor
Block D Cooling Options
0
1
Sensor with integral water cooling for ambient temperatures up to 175ºC (350ºF)
Sensor supplied with WJ-7 waterjacket accessory for ambient temperatures up to 315ºC (600ºF)
Accessories
APA-7 APS-7 RAM-7 WJMB-7
WJMFST-7
WJST12
POI-7 PS-7 TSP-7 Aluminum air purge collar
Stainless steel air purge collar
Stainless steel adjustable bracket
Adjustable mounting base for water jacket
Mounting flange for use with sighting tubes
30cm (12") Stainless steel sight tube (up to 800ºC/1472ºF)
Power supply (24VDC, 110/220VAC input) & terminal block mounted in a NEMA 4 (IP65) enclosure
24VDC 1.2A Industrial power supply, DIN rail mount (110/220VAC input)
Spare terminal block accessory
The accessories shown are only a few of the many products available for Modline 7 sensors to support a variety of application needs. A complete list of power and
communication accessories, protective windows and environmental protection products, as well as mounting brackets, can be found in the Modline 7 sensor manual.
Please contact your local IRCON sales representative for detailed information.
The Worldwide Leader in Noncontact Temperature Measurement
IRCON, Inc.
Worldwide Headquarters
Santa Cruz, CA USA
Tel: 1 800 227 8074 (USA and Canada, only)
1 831 458 3900
info@ircon.com
www.ircon.com
European Headquarters
Berlin, Germany
Tel: 49 30 4 78 00 80
China Headquarters
Beijing, China
Tel: 8610 6438 4691
To find an IRCON office near you, please visit www.ircon.com
Worldwide Service
IRCON offers services, including repair and calibration. For more information, contact your local office or e-mail info@ircon.com
© 2012 Ircon, Inc. (4162449 Rev A) 3/2012
Ircon, the Ircon logo and Modline are registered trademarks of Ircon, Inc.
Specifications subject to change without notice.
Download PDF
Similar pages