S-4605 SDI to Optical Fiber converter S-4606 Optical Fiber to SDI converter USER MANUAL SWIT Electronics Co., Ltd. Tel:+86-25-85805753 Fax:+86-25-85805296 http://www.swit.cc E-mail: firstname.lastname@example.org 1. Characteristics ◆ Portable 3G/HD/SD-SDI transmission via Optical Fiber ◆ Single-mode optical fiber, max 20km reliable transmission ◆ Support hot swap of optical module ◆ S-4605: SDI to Optical Fiber, with SDI loop output ◆ S-4605: Optical Fiber to SDI, with 2 SDI output ◆ Heavy duty housing, with bottom screw threads for installing 2. Product View S-4605 Left side view Front view ⑴ SDI IN: 3G/HD/SD-SDI input (BNC) ⑵ SDI LOOP: 3G/HD/SD-SDI loop through output (BNC) ⑶ LED status indicator ⑷ OPTICAL OUT: Optical fiber output (LC) ⑸ DC 12V: 5.5mm pole DC input Right side view S-4606 Left side view Front view Right side view ⑴ SDI OUT: 3G/HD/SD-SDI output x2 (BNC) ⑵ LED status indicator ⑶ OPTICAL IN: Optical fiber input (LC) ⑷ DC 12V: 5.5mm pole DC input 3. Working Flow 4. LED status Indicators ⑴ Power (Red): Power indicator ⑵ SDI LOCK (Green): SDI indicator, lights on when there’s SDI input or output recognized 5. Installation Plate Installation Plate Screw hole 3 Installed Screw hole 4 Screw hole 1 Screw hole 5 Rear View of S-4605/4606 Match thread 1 Screw Match thread 2 hole 2 Screw hole 6 Match the screw holes 1&2 with the threads 1&2 of S-4605/4606, and fix the installation plate to the S-4605/4606 by the supplied screws. The screw holes 3, 4, 5, 6 are used to install the converter to wall or racks. 6. Specifications Model Input Output S-4605 3G/HD/SD SDI×1 3G/HD/SD SDI×1 OPTICAL×1 ； S-4606 OPTICAL×1 3G/HD/SD SDI×2 SMPTE-425M SDI Format Optical connector Transmission distance Wavelength Power consumption Working voltage Working environment Dimension Net weight 1080p (60/59.94/50) 1080p (30/29.97/25/24/23.98) SMPTE-274M 1080i (60/59.94/50) SMPTE-296M 720p (60/59.94/50) ITU-R BT.656 576i (50) SMPTE-125M 480i (59.94) LC 20km 1310nm 1260nm~1580nm ≤3W DC 6-18V Temperature: 0°C -+70°C, Humidity:10%-90% 98×84×29 mm 200g 7. Maintenance 1. Please do not disassemble the product by yourself. 2. Keep the product away from rain or moisture. 3. Please use the provided power adapter and if you use third party power adapter, please make sure the voltage range, supplied power, and polarity of power lead are fit.