B-Series B3 - TelecomDatasheets.com

DATASHEET
B-Series B3
Gigabit Ethernet Stackable L2/L3/L4 Edge Switch with Optional Policy Support
High-availability design assures
reliable network operations
Granular QoS capabilities support
converged multimedia networks
Aligns network resource utilization
with business goals and priorities
PoE and IPv4 routing support a
variety of networks and devices
Benefits
Business Alignment
• Granular QoS capabilities support
converged multimedia networks
• Aligns network resource utilization with
business goals and priorities
Investment protection via lifetime
warranty
• Reliable network operation for missioncritical applications
1.15 Tbps capacity and 571.2 Mpps
Operational Efficiency
Product Overview
The Enterasys B3 is a high-performance, Gigabit Ethernet edge switch that provides scalable,
wire-rate performance in support of the bandwidth-intensive and delay-sensitive requirements of
today’s demanding applications. With support for 16,000 MAC addresses, the B3 is an excellent
choice for environments that require complete multi-layer switching capabilities and support for
high density 10/100/1000 Ethernet ports and static routing capabilities. The B3 is well-suited
for Gigabit Ethernet networks as well as 100 Mbps networks that may migrate to a predominantly
Gigabit Ethernet network. In addition to its complete multi-layer switching capabilities, the B3 also
provides basic routing features, including RIP, static IPv4 routing, and IPv6 management support.
Along with a switch capacity of 144 Gbps, the B3 provides up to 48 10/100/1000 Ethernet ports
as well as 4 Gigabit Ethernet uplink combo ports. Leveraging the B3’s wire-rate stacking capability,
as many as 8 B3s (both 24-port and 48-port combinations) can be interconnected in a single stack
to create a virtual switch that provides 1.15 Tbps of capacity and up to 384 10/100/1000 Ethernet
ports as well as 32 Gigabit Ethernet uplink combo ports.
Robust Quality of Service (QoS) features enable strong support for integrated multimedia networks,
including Voice over IP (VoIP) and video, as well as all types of data-intensive applications. The
B3’s optional policy license enables its highly customizable Layer 2/3/4 packet classification
capabilities to work together with the 8 hardware-based priority queues associated with each
Ethernet port to support a suite of differentiated services with as many as 8 distinct priority levels.
In conjunction with its non-blocking L2 switching and L3 routing architecture, the B3’s intelligent
queuing mechanisms ensure that mission-critical applications receive prioritized access to
network resources.
The B3 provides a secure network by utilizing its authentication and security features, which can be
applied at the port level or at the user level. Making use of the NMS Policy Manager or a standard
CLI, the Enterasys role-based architecture enables a network administrator to define distinct roles
or profiles that represent operational groups within a business (e.g., employee, executive, guest,
etc). Multiple users/devices per port can be authenticated via IEEE 802.1X, MAC address, or web
authentication, and then assigned a pre-defined operational role. Network operations can be easily
tailored to meet business-oriented requirements by providing each role with individualized access
to network services and applications (e.g., a guest should have different network access privileges
than an employee).
• Scalable architecture supports
continued growth of network capacity
• Consolidated management capabilities
reduce network operational expenses
• Security capabilities without the high overhead
Security
• Network resources securely allocated
according to user roles
• Network security maintained
concurrently with user mobility
• Architecture designed with integral
network security
Support and Service
• Industry-leading customer satisfaction
and first call resolution rates
• Personalized services, including site
surveys, network design, installation,
and training
• Lifetime warranty
There is nothing more important
than our customers.
The B-Series product line provides high port density in a 1U footprint
and is environmentally friendly by design. By maximizing port density
within a given amount of rack space, the B3 minimizes its cooling
requirements. The B3’s overall electrical requirement is further reduced
by a low current draw and an extreme tolerance for high environmental
temperatures. A highly-scalable architecture and a lifetime warranty
ensures that a B3 network investment will sustain a secure, feature-rich,
and cost-effective network well into the future.
Reliability and Availability
The B3 design incorporates redundancy and failure protection
mechanisms complete with automatic failover and recovery capabilities
to provide a reliable network. An integral power supply is the primary
source of power for the B3 and complete power redundancy is provided
by an optional external power supply. In addition to the standard version
of the B3, there is also a redundant Power over Ethernet (PoE) version of
the B3 which supports network devices that require external power such
as wireless access points, VoIP phones, and network cameras. A virtual
switch can be created by interconnecting as many as 8 B3s in a single
stack, which can be managed via a single IP address with redundant
management connections. The B3’s closed-loop stacking (CLS) capability
utilizes bi-directional switch interconnects to maintain connectivity
within the virtual switch despite any physical switch-level failure. Up to 8
Ethernet ports can be grouped together to create a multi-link aggregation
group (LAG). A LAG’s Ethernet ports can be collocated on a single B3 or
they can be distributed across multiple B3s within a stack to prevent a
switch-level failure from disrupting data communications.
Advanced Quality of Service
Robust QoS features enable strong support for integrated multimedia
networks, including VoIP and video, as well as all types of data-intensive
applications. With an optional policy license, the B3 provides highly
customizable Layer 2/3/4 packet classification capabilities, which can
be based upon physical port ID, MAC address, IP subnet, IP address,
IP protocol type, IP Type of Service (ToS), differentiated services code
point (DSCP), and TCP/UDP port. The B3 provides 8 hardware-based
priority queues per Ethernet port, which work together with its packet
classification capabilities to support a suite of differentiated services
with as many as 8 distinct priority levels. The strict and weighted round
robin queuing algorithms ensure that mission-critical applications receive
prioritized access to network resources.
Security
The B3 provides a secure network by utilizing its authentication and
security features, which can be applied at the port level or at the user
level. Making use of the NMS Policy Manager or a standard CLI, the
Enterasys role-based architecture enables a network administrator to
define distinct roles or profiles that represent operational groups within
a business (e.g., employee, executive, guest, etc). Multiple users/
devices per port can be authenticated via IEEE 802.1X, MAC address,
or web authentication, and then assigned a pre-defined operational
role. Administrators can easily transition from RFC 3580 and complex
ACL deployments to the Enterasys role-based policy framework in a
seamless fashion, without the need to make changes to their RADIUS
infrastructure (e.g., adding filter-ID). In addition, the B3 also supports
DiffServ and access control lists (ACLs) for supplementary network
security. Network operations can be easily tailored to meet businessoriented requirements by providing each role with individualized access
to network services and applications (e.g., a guest should have different
network access privileges than an employee).
Investment Protection
The B3 is a cost-effective, feature-rich, stackable switch that provides
a broad set of features today and will continue to deliver benefits well
into the future. Customers can grow and/or enhance their networks while
protecting their investment by adding B3s into existing B-Series networks
and/or stacks. When multiple B3s are stacked together, each switch in
the stack assumes the feature set that is common to all switches in the
stack to ensure operational compatibility. All B-Series products include
a lifetime warranty that continues for 5 years after the date of product
discontinuation. For more information regarding warranty terms and
conditions please go to http://www.enterasys.com/support/warranty.aspx.
Performance & Scalability
The B3 provides scalable, wire-rate performance in support of the
bandwidth-intensive and delay-sensitive requirements of today’s
demanding applications. Along with a switch capacity of 144 Gbps, the
B3 provides up to 48 10/100/1000 Ethernet ports as well as 4 Gigabit
Ethernet uplink combo ports. Leveraging the B3’s wire-rate stacking
capability, as many as 8 B3s (both 24-port and 48-port combinations)
can be interconnected in a single stack to create a virtual switch that
provides 1.15 Tbps of capacity and up to 384 10/100/1000 Ethernet
ports as well as 32 Gigabit Ethernet uplink combo ports. The B3
supports hundreds of distinct policies (rules) that enable granular
definition of network access capabilities for each role, thus aligning
network resource utilization with business goals and priorities.
Page 2
Standards and Protocols
MAC Address Table Size
16,000
VLANs
4,096 VLAN IDs
1,024 VLAN Entries per Stack
Embedded Services
Ingress Rate Limiting
IP TOS Rewrite
Layer 2/3/4 Classification
Multi-layer Packet Processing
Switching Services
IEEE 802.1AB – LLDP
ANSI/TIA-1057 – LLDP-MED
IEEE 802.1D – MAC Bridges
IEEE 802.1s – Multiple Spanning Trees
IEEE 802.1t – 802.1D Maintenance
IEEE 802.1w – Rapid Spanning Tree
Reconvergence
IEEE 802.3 – Ethernet
IEEE 802.3ab – GE over Twisted Pair
IEEE 802.3ad – Link Aggregation
IEEE 802.3af – PoE
IEEE 802.3i – 10Base-T
IEEE 802.3u – 100Base-T, 100Base-FX
IEEE 802.3z – GE over Fiber
Full/half duplex auto-sense support on all ports
IGMP Snooping v1/v2/v3
Jumbo Frame support (9,216 bytes)
Loop Protection
One-to-One and Many-to-One Port Mirroring
Port Description
Protected Ports
Per-port Broadcast/Multicast/Unknown
Unicast Suppression
Spanning Tree Backup Root
STP Pass Thru
VLAN Support
Generic Attribute Registration Protocol (GARP)
Generic VLAN Registration Protocol (GVRP)
IEEE 802.1p – Traffic classification
IEEE 802.1q – VLAN Tagging
Protocol-based VLANs with Enterasys Policy
IEEE 802.3ac – VLAN Tagging Extensions
Port-based VLAN (private port/private VLAN)
Tagged-based VLAN
VLAN Marking of Mirror Traffic
Quality of Service
8 Priority Queues per Port
802.3x Flow Control
IP DSCP – Differentiated Services Code Point
IP Precedence
IP Protocol
Queuing Control – Strict and Weighted
Round Robin
Source/Destination IP Address
Source/Destination MAC Address
Security
ARP Spoof Protection
DHCP Spoof Protection
Dynamic and Static MAC Locking
EAP Pass Thru
IEEE 802.1X Port Authentication
MAC-based Port Authentication
RADIUS Accounting for MAC Authentication
RADIUS Client
RFC 3580 – IEEE 802.1X RADIUS Usage
Guidelines
Multi-user Authentication per Gigabit Port
Password Protection (encryption)
Secure Networks Policy License
Secured Shell (SSHv2)
Secured Socket Layer (SSL)
User and IP Phone Authentication
Web-based Port Authentication
IPv4 Routing & Multicast
Access Control List (ACLs)
ARP & ARP Redirect
Extended ACLs
IP Helper Address
RFC 826 – Ethernet ARP
RFC 1058 – RIP v1
RFC 1256 – ICMP Router Discovery Messages
RFC 1724 – RIPv2 MIB Extension
RFC 2236 – IGMPv2
RFC 2453 – RIP v2
RFC 3046 – DHCP/BootP Relay
Static Routes
VLAN-based ACLs
MIB Support
Enterasys Entity MIB
Enterasys Policy MIB
Enterasys VLAN Authorization MIB
ANSI/TIA-1057 – LLDP-MED MIB
IEEE 802.1AB – LLDP MIB
IEEE 802.1X MIB – Port Access
IEEE 802.3ad MIB – LAG MIB
RFC 826 – ARP and ARP Redirect
RFC 951, RFC 1542 – DHCP/BOOTP Relay
RFC 1213 – MIB/MIB II
RFC 1493 – BRIDGE-MIB
RFC 1643 – Ethernet-like MIB
RFC 2096 – IP Forwarding Table MIB
RFC 2131, RFC 3046 – DHCP Client/Relay
RFC 2233 – IF-MIB
RFC 2271 – SNMP Framework MIB
RFC 2618 – RADIUS Authentication Client
MIBRFC 2620 – RADIUS Accounting Client
MIB
RFC 2668 – Managed Object Definitions for
802.3 MAUs
RFC 2674 – P-BRIDGE-MIB
RFC 2674 – QBRIDGE-MIB VLAN Bridge MIB
RFC 2737 – Entity MIB (physical branch only)
RFC 2819 – RMON-MIB
RFC 2933 – IGMP MIB
RFC 3289 – DiffServ MIB
RFC 3413 – SNMP v3 Applications MIB
RFC 3414 – SNMP v3 User-based Security
Module (USM) MIB
RFC 3415 – View-based Access Control Model
for SNMP
RFC 3584 – SNMP Community MIB
RFC 3621 – Power over Ethernet MIB
Management
Alias Port Naming
Command Line Interface (CLI)
Configuration Upload/Download
Editable Text-based Configuration File
TFTP Client
Multi-configuration File Support
NMS Automated Security Manager
NMS Console
NMS Inventory Manager
NMS Policy Manager
Node/Alias Table
RFC 768 – UDP
RFC 783 – TFTP
RFC 791 – IP
RFC 792 – ICMP
RFC 793 – TCP
RFC 826 – ARP
RFC 854 – Telnet
RFC 951 – BootP
RFC 1157 – SNMP
RFC 1901 – Community-based SNMPv2
RFC 2271 – SNMP Framework MIB
RFC 2933 – IGMP MIB
RFC 3176 – sFlow
RFC 3413 – SNMP Applications MIB
RFC 3414 – SNMP User-based Security
Module (USM) MIB
RFC 3415 – View-based Access Control Model
for SNMP
RFC 3826 – Advanced Encryption System
(AES) for SNMP
RMON (Stats, History, Alarms, Events, Filters,
Packet Capture)
Secure Copy (SCP)
Secure FTP (SFTP)
Simple Network Management Protocol (SNMP)
v1/v2c/v3
Simple Network Time Protocol (SNTP)
SSHv2
RFC 3164 – The BSD Syslog Protocol
TACACS+ for Management Authentication,
Authorization and Auditing
Web-based Management
Webview via SSL Interface
Page 3
Switch Model Specifications
B3G124-24
B3G124-24P
B3G124-48
B3G124-48P
Throughput Capacity
wire-speed Mpps
(switch / stack)
35.7 Mpps / 285.7 Mpps
35.7 Mpps / 285.7 Mpps
71.4 Mpps / 571.2 Mpps
71.4 Mpps / 571.2 Mpps
Switching Capacity
(switch / stack)
48 Gbps / 384 Gbps
48 Gbps / 384 Gbps
96 Gbps / 768 Gbps
96 Gbps / 768 Gbps
Stacking Capacity
(switch / stack)
48 Gbps / 384 Gbps
48 Gbps / 384 Gbps
48 Gbps / 384 Gbps
48 Gbps / 384 Gbps
Aggregate Throughput
Capacity (switch / stack)
96 Gbps / 768 Gbps
96 Gbps / 768 Gbps
144 Gbps / 1.15 Tbps
144 Gbps / 1.15 Tbps
802.3af Compliance
N/A
Yes
N/A
Yes
System Power
N/A
375 watts per switch with up
to 15.4 watts per port
N/A
375 watts per switch with up
to 15.4 watts per port
Performance
PoE Specifications
Per-port switch power monitor:
• Enable/disable
• Priority safety
• Overload & short circuit
protection
Per-port switch power monitor:
• Enable/disable
• Priority safety
• Overload & short circuit
protection
Physical Specifications
Dimensions (H x W x D)
H: 4.4 cm (1.73”)
W: 44.1 cm (17.36”)
D: 36.85 cm (14.51”)
H: 4.4 cm (1.73”)
W: 44.1 cm (17.36”)
D: 36.85 cm (14.51”)
H: 4.4 cm (1.73”)
W: 44.1 cm (17.36”)
D: 36.85 cm (14.51”)
H: 4.4 cm (1.73”)
W: 44.1 cm (17.36”)
D: 36.85 cm (14.51”)
Net Weight
5.05 kg (11.11 lb)
6.25 kg (13.75 lb)
5.35 kg (11.77 lb)
6.55 kg (14.41 lb)
MTBF
162,308 hours
115,324 hours
110,509 hours
81,176 hours
Physical Ports
• (24) 10/100/1000 autosensing, auto-negotiating,
MDI/MDI-X RJ45 ports
• (4) mini-GBIC combo ports
• (2) dedicated stacking ports
• (1) DB9 console port
• (1) RPS port
• (24) 10/100/1000 PoE autosensing, auto-negotiating,
MDI/MDI-X RJ45 ports
• (4) mini-GBIC combo ports
• (2) dedicated stacking ports
• (1) DB9 console port
• (1) RPS port
• (48) 10/100/1000 autosensing, auto-negotiating,
MDI/MDI-X RJ45 ports
• (4) mini-GBIC combo ports
• (2) dedicated stacking ports
• (1) DB9 console port
• (1) RPS port
• (48) 10/100/1000 PoE autosensing, auto-negotiating,
MDI/MDI-X RJ45 ports
• (4) mini-GBIC combo ports
• (2) dedicated stacking ports
• (1) DB9 console port
• (1) RPS port
Nominal Input Voltage
100 – 240 VAC
100 – 240 VAC
100 – 240 VAC
100 – 240 VAC
Input Frequency
50 – 60 Hz
50 – 60 Hz
50 – 60 Hz
50 – 60 Hz
Input Current
0.8 A Max
7.5 A Max
1.4 A Max
7.5 A Max
Power Consumption
63 watts
481 watts
131 watts
568 watts
IEC 6-2-1
Standard Operating
Temperature
0° to 50° C
(32° to 122° F)
0° to 50° C
(32° to 122° F)
0° to 50° C
(32° to 122° F)
0° to 50° C
(32° to 122° F)
IEC 6-2-14
Non-Operating
Temperature
-40° to 70° C
(-40° to 158° F)
-40° to 70° C
(-40° to 158° F)
-40° to 70° C
(-40° to 158° F)
-40° to 70° C
(-40° to 158° F)
Heat Dissipation
216 BTUs/Hr
284 BTUs/Hr
447 BTUs/Hr
561 BTUs/Hr
5% - 95% non-condensing
5% - 95% non-condensing
5% - 95% non-condensing
5% - 95% non-condensing
IEC 68-2-6, IEC68-2-36
IEC 68-2-6, IEC68-2-36
IEC 68-2-6, IEC68-2-36
IEC 68-2-6, IEC68-2-36
IEC 68-2-29
IEC 68-2-29
IEC 68-2-29
IEC 68-2-29
IEC 68-2-32
IEC 68-2-32
IEC 68-2-32
IEC 68-2-32
Power Requirements
Temperature
Humidity
Operating Humidity
Vibration
Shock
Drop
Page 4
Switch Model Specifications (cont.)
B3G124-24
B3G124-24P
B3G124-48
B3G124-48P
Safety
UL 60950-1, CSA 22.1
60950, EN 60950-1, and
IEC 60950-1
UL 60950-1, CSA 22.1
60950, EN 60950-1, and IEC
60950-1
UL 60950-1, CSA 22.1
60950, EN 60950-1, and IEC
60950-1
UL 60950-1, CSA 22.1
60950, EN 60950-1, and IEC
60950-1
EMC
FCC Part 15 (Class A),
ICES-003 (Class A), BSMI,
VCCI V-3, AS/NZS CISPR 22
(Class A), EN 55022 (Class
A), EN 55024, EN 610003-2, and EN 61000-3-3
FCC Part 15 (Class A), ICES003 (Class A), BSMI, VCCI
V-3, AS/NZS CISPR 22 (Class
A), EN 55022 (Class A), EN
55024, EN 61000-3-2, and EN
61000-3-3
FCC Part 15 (Class A), ICES-003
(Class A), BSMI, VCCI V-3, AS/
NZS CISPR 22 (Class A), EN
55022 (Class A), EN 55024, EN
61000-3-2, and EN 61000-3-3
FCC Part 15 (Class A), ICES-003
(Class A), BSMI, VCCI V-3, AS/
NZS CISPR 22 (Class A), EN
55022 (Class A), EN 55024, EN
61000-3-2, and EN 61000-3-3
Agency and Regulatory
Standard Specifications
Redundant Power Supply Equipment Specifications
STK-RPS-150CH2 Power Shelf
Power Supply Slots
2
Dimensions (H x W x D)*
5.5 cm (2.2”) x 44.0 cm (17.3”) x 18.0 cm (7.0”)
Weight
0.95 kg (2.09 lbs)
Note: dimensions include integrated rack mount ears
STK-RPS-150CH8 Power Shelf
Power Supply Slots
8
Dimensions (H x W x D)*
22.26 cm (8.77”) x 44.0 cm (17.3”) x 26.4 cm (10.4”)
Weight
5.27 kg (11.6 lbs)
Operating Relative Humidity
10% to 90%
AC Input Frequency Range
50-60 Hz
AC Input Voltage Range
100 - 240 VAC
Maximum Output Power
156 W continuous
C2RPS-POE Power Supply
Dimensions (H x W x D)*
4.45 cm (1.75”) x 44.5 cm (17.5”) x 16.5 cm (6.5”)
Net Weight (Unit Only)
3.47 kg (7.63 lbs)
Gross Weight (Packaged Unit)
4.95 kg (10.89 lbs)
MTBF
589,644 hours at 25° C (77° F)
C2RPS-PSM Power Supply
Dimensions (H x W x D)
19.6 cm (7.7”) x 5.2 cm (2.04”) x 25.7 cm (10.1”)
Net Weight (Unit Only)
1.75 kg (3.85 lbs)
Gross Weight (Packaged Unit)
3.20 kg (7.04 lbs)
MTBF
300,000 hours
Operating Temperature
0° C to 50° C (32° F to 122° F)
Storage Temperature
-30° C to 73° C (-22° F to 164° F)
Operating Temperature
5° C to 40° C (41° F to 104° F)
Storage Temperature
-30° C to 73° C (-22° F to 164° F)
Operating Relative Humidity
10% to 90%
AC Input Frequency Range
50-60 Hz
AC Input Voltage Range
100 - 240 VAC
Maximum Output Power
500 W continuous
Page 5
Ordering Information
B3 Switches
Part Number
Description
B3G124-24
B3 with (24) 10/100/1000 RJ45 ports, (4) mini-GBIC combo ports, and (2) dedicated stacking ports.
Total active ports per switch: (24) Gigabit ports.
B3G124-24P
B3 with (24) 10/100/1000 PoE RJ45 ports, (4) mini-GBIC combo ports, and (2) dedicated stacking ports.
Total active ports per switch: (24) Gigabit ports.
B3G124-48
B3 with (48) 10/100/1000 RJ45 ports, (4) mini-GBIC combo ports, and (2) dedicated stacking ports.
Total active ports per switch: (48) Gigabit ports.
B3G124-48P
B3 with (48) 10/100/1000 PoE RJ45 ports, (4) mini-GBIC combo ports, and (2) dedicated stacking ports.
Total active ports per switch: (48) Gigabit ports.
Optional Software Licenses
B3POL-LIC
B3 policy license (per switch)
B3POL-LIC25
B3 policy licenses – Qty of 25
B3POL-LIC50
B3 policy licenses – Qty of 50
Cables
C2CAB-SHORT
Stacking cable for connecting adjacent switches (30 cm)
C2CAB-LONG
Stacking cable for connecting top switch to bottom switch (1 m)
C2CAB-2M
Stacking cable for all B3/C3 models (2 m)
C2CAB-5M
Stacking cable for 48-port B2/C2 models and all B3/C3 models (5 m)
SSCON-CAB
Console Cable (for use on all A2, B2, B3, C2, and C3 switches)
Redundant Power Supply Equipment
STK-RPS-150CH2
2-slot RPS chassis (supports up to 2 C2RPS-PSMs)
STK-RPS-150CH8
8-slot RPS chassis (supports up to 8 C2RPS-PSMs)
C2RPS-PSM
150-watt redundant Non-PoE power supply with one DC cable
C2RPS-SYS
8-slot RPS chassis plus 1 C2RPS-PSM (chassis supports up to 8 C2RPS-PSMs)
C2RPS-POE
500-watt redundant PoE power supply with one DC cable
Transceivers
Enterasys transceivers provide connectivity options for Ethernet over
twisted pair copper and fiber optic cables with transmission speeds
from 100 Megabits per second to 10 Gigabits per second. All Enterasys
transceivers meet the highest quality for extended life cycle and the best
possible return on investment. For detailed specifications, compatibility
and ordering information please go to http://www.enterasys.com/products/
transceivers-ds.pdf.
Page 6
Warranty
As a customer-centric company, Enterasys is committed to providing
quality products and solutions. In the event that one of our products
fails due to a defect, we have developed a comprehensive warranty that
protects you and provides a simple way to get your products repaired or
media replaced as soon as possible.
B-Series switches come with a lifetime warranty against manufacturing
defects. For full warranty terms and conditions please go to http://www.
enterasys.com/support/warranty.aspx.
Service and Support
Enterasys Networks provides comprehensive service offerings that range
from Professional Services to design, deploy, and optimize customer
networks, customized technical training, to service and support tailored
to individual customer needs. Please contact your Enterasys account
executive for more information about Enterasys Service and Support.
Contact Us
For more information, call Enterasys Networks toll free at 1-877-801-7082,
or +1-978-684-1000 and visit us on the Web at enterasys.com
Patented Innovation
© 2010 Enterasys Networks, Inc. All rights reserved. Enterasys Networks reserves the right to change
specifications without notice. Please contact your representative to confirm current specifications.
Please visit http://www.enterasys.com/company/trademarks.aspx for trademark information.
07/10
Delivering on our promises. On-time. On-budget.
Download PDF
Similar pages