GEM 2 Optima 186-1.0 SFSM specification Sheet

Gem•2®
Model
Sensor-Activated
Single Flush Side Mount
Single Flush Side Mount
Description
Exposed, battery-powered, sensor-activated, urinal flushometer with a single flush
side mount unit for 3/4” top spud urinals.
Flush Cycle
£
GEM2 186-1.0 SFSM
Low Consumption (1.0 gpf/3.8 Lpf)
Specifications
Quiet, Exposed, Piston Type, Chrome Plated Urinal Flushometer with the following
features:
• Fixed Volume Piston with Filtered O-ring Bypass
• ADA Compliant Optima Plus® Battery Powered Infrared Sensor for automatic “No
Hands” operation
• Chrome Plated Infrared Sensor Housing
• Can be Mounted on either the Left or Right Side of Valve
• True Mechanical Override Flush Button
• Four (4) Size C Alkaline Batteries included: Duracell® with DURALOCK Power
Preserve Technology™-guaranteed for up to 10 years in storage
• “Low Battery” Flashing LED
• “User in View” Flashing LED
• 72-Hour Sentinel Flush
• ¾” I.P.S. Screwdriver Bak-Chek® Angle Stop with free spinning, vandal resistant
Stop Cap
• Adjustable Tailpiece
• High Back Pressure Vacuum Breaker Flush Connection with One-piece Bottom
Hex Coupling Nut
• Spud Coupling and Flange for 3/4” Top Spud
• Sweat Solder Adapter w/Cover Tube and Cast Wall Flange w/Set Screw
• High Copper, Low Zinc Brass Castings for Dezincification Resistance
• Flush Accuracy Controlled by CID Technology
• No External Volume Adjustment to Ensure Water Conservation
• Packing, Stop Seat and Vacuum Breaker Molded from PERMEX® Rubber
Compound for Chloramine resistance
Smart Sense Technology™
Sloan’s SFSM flushometers are equipped with Smart Sense Technology™, which
applies extended range and logic techniques to significantly reduce water usage
in high use urinal applications; such as when a continuous line of people (queue)
forms. In fact, during a continuous queue, regardardless of the number of users, the
maximum amount of water used is only 2.5 gallons, assuming a 0.5 gpf piston kit.
Please contact Sloan for specific details.
Automatic Operation
Sloan’s SFSM flushometers are activated via multi-lobular infrared sensor. The
sensor sets the flushing mechanism when the user is detected and completes the
flush when the user steps away.
Manual Operation
Sloan’s SFSM flushometers can also be activated manually by pushing the black
TMO button.
Valve Body, Tailpiece and Control Stop shall be in conformance with ASTM Alloy
Classification for Semi-Red Brass. Valve shall be in compliance with the applicable
sections of ASSE 1037, ASME 112.18, ASME 112.19, ANSI 117.1. Installation
conforms to ADA requirements.
Service Mode
Accessories
Touchless, sensor activation eliminates the need for user contact except to initiate
the True Mechanical Override button when required, to help control the spread of
infectious diseases. The 72-Hour Sentinel Flush keeps fixture fresh during periods of
non-use.
See Accessories Section and Optima Plus Accessories Section of the Sloan catalog
for details on these and other Optima Plus Flushometer variations.
Fixtures
Consult Sloan for Sloan brand matching fixture options.
Features service mode which ignores targets for 10 minutes to enable fixture to be
cleaned or serviced.
Hygienic
Warranty
3 year (limited)
This space for Architect/Engineer approval
Job Name
Date
Model Specified
Quantity
Variations Specified
Customer/Wholesaler
Contractor
Architect
GEM2 186-1.0 SFSM 02-14
The information contained in this document is subject to change without notice.
Description
Exposed, battery-powered, sensor-activated, urinal flushometer with a single flush
side mount unit for 3/4” top spud urinals.
SFSM DIMENSIONS
6”
(150 mm)
Flush Cycle
£
GEM2 186-1.0 SFSM
5”
Low Consumption (1.0 gpf/3.8 Lpf)
ELECTRICAL SPECIFICATIONS
(131 mm)
SENSOR WINDOW
SFSM Battery Type
(4) Size C Alkaline: Duracell®
with DURALOCK Power Preserve
Technology™
Control Circuit
Solid State
6 VDC Input
2-3 Second Arming Delay
72 Hour Sentinel Flush
SFSM Sensor Type
Infrared Convergence Type Object Lock
Detection
SFSM Sensor Range
Factory Set at
22” - 42” (559 mm-1067 mm),
If Converted to Urinal Range Setting
15”- 30” (381 mm-762 mm)
Battery Life
3 Years @ 3,000 Flushes/Month
Indicator Lights
User in View/Low Battery
Valve Operating Pressure (Flowing)
25-80 psi (172-552 kPa)
OPERATION
1. A continuous, invisible
light beam is emitted
from the object lock
infrared sensor.
2. As the user enters
the beam’s effective
range, 22” - 42” (559
mm-1067 mm), the
object lock infrared
sensor senses the
user.
3. When the user steps
away from the object
lock Infrared sensor,
the circuit initiates the
flushing cycle to flush
the fixture. The circuit
then automatically
resets and is ready for
the next user.
ROUGH-IN
7”
(178 mm)
6”
(131 mm)
2 3/4”
(70 mm)
Includes EBV-500-A
Single-Flush
Side Mount Unit
SLOAN • 10500 SEYMOUR AVENUE • FRANKLIN PARK, IL 60131
Phone: 1-800-9-VALVE-9 or 1-847-671-4300 • Fax: 1-800-447-8329 or 1-847-671-4380 • www.sloanvalve.com
© 2014 Sloan Valve Company
GEM2 186-1 SFSM 02-14
Download PDF
Similar pages