Innolux G104V1-T03 TFT-Display distributed by DATA MODUL AG

SPECIFIC ATION
G104V1-T03
10.4” TFT - VGA - TTL
Version: 2.4
Date: 20.07.2016
Note: This specification is subject to change without prior notice
www.data-modul.com
PRODUCT SPECIFICATION
Doc. Number: DN0625097
□ Tentative Specification
□ Preliminary Specification
■ Approval Specification
MODEL NO.: G104V1
SUFFIX: T03
Customer:
APPROVED BY
SIGNATURE
Name / Title
Note
Please return 1 copy for your confirmation with your
signature and comments.
Approved By
yuhsiang.chang
(張喻翔/514-10922)
2016-07-28
10:55:00 CST
Version 2.4
Checked By
aston.yy.chen
(陳彥宇/514-10914)
2016-07-22
14:55:04 CST
Prepared By
stefanie.fan
(范家禧)
2016-07-22
13:57:11 CST
20 July 2016
The copyright belongs to InnoLux. Any unauthorized use is prohibited.
1 / 27
PRODUCT SPECIFICATION
CONTENTS
1. GENERAL DESCRIPTION
1.1 OVERVIEW
1.2 FEATURES
1.3 APPLICATION
1.4 GENERAL SPECIFICATIONS
1.5 MECHANICAL SPECIFICATIONS
-------------------------------------------------------
5
2. ABSOLUTE MAXIMUM RATINGS
2.1 ABSOLUTE RATINGS OF ENVIRONMENT
2.2 ELECTRICAL ABSOLUTE RATINGS
2.2.1 TFT LCD MODULE
2.2.2 LED CONVERTER
-------------------------------------------------------
7
3. ELECTRICAL CHARACTERISTICS
3.1 TFT LCD MODULE
3.2 LED CONVERTER
-------------------------------------------------------
8
4. BLOCK DIAGRAM
4.1 TFT LCD MODULE
-------------------------------------------------------
12
5. INPUT TERMINAL PIN ASSIGNMENT
5.1 TFT LCD MODULE
5.2 BACKLIGHT UNIT
5.3 COLOR DATA INPUT ASSIGNMENT
-------------------------------------------------------
13
6. INTERFACE TIMING
6.1 INPUT SIGNAL TIMING SPECIFICATIONS
6.2 POWER ON/OFF SEQUENCE
6.3 SCANNING DIRECTION
-------------------------------------------------------
15
7. OPTICAL CHARACTERISTICS
7.1 TEST CONDITIONS
7.2 OPTICAL SPECIFICATIONS
-------------------------------------------------------
18
8. RELIABILITY TEST CRITERIA
-------------------------------------------------------
21
9. PACKAGING
9.1 PACKING SPECIFICATIONS
9.2 PACKING METHOD
9.3 UN-PACKING METHOD
-------------------------------------------------------
22
10. DEFINITION OF LABELS
-------------------------------------------------------
24
11. PRECAUTIONS
------------------------------------------------------11.1 ASSEMBLY AND HANDLING PRECAUTIONS
11.2 SAFETY PRECAUTIONS
25
12. MECHANICAL CHARACTERISTICS
26
Version 2.4
-------------------------------------------------------
20 July 2016
The copyright belongs to InnoLux. Any unauthorized use is prohibited.
2 / 27
PRODUCT SPECIFICATION
REVISION HISTORY
Version
0.0
Date
Section
July 29,2009
All
1.4
1.5
2.1
3.1
3.2
1.0
Mar 12,2010
4.1
5.1
6.1
6.2
7.2
9.1
9.2
10.1
12
2.0
Mar 17,2010
1.4
1.5
3.1
3.2
2.1
2.2
G104V1-T03 Tentative Spec was first issued.
G104V1-T03 Preliminary Spec was first issued.
Add the Module Power Consumption value.
Add note(1) with module depth typical value 7.8mm without TTL
connector and 9.34 mm with TTL connector.
Add plot of temperature v.s relative humidity.
Add Max Power Supply Current under white/black pattern.
Add Power Consumption valueof TFT-LCD
Modify Converter Power Supply Current to 0.6A.
Modify Converter Power Consumption to 7.2W.
Remove HS/VS symbol and add converter ADJ/EN symbol.
Pin3/4 change to NC.
Add Horizontal/Vertical Active Display Term parameter.
Note(1):remove Hsync/Vsync description.
Modify power on/off sequence and delay time request(T6/T7/T10).
Modify optical specification value.
Modify note(4) : gray level L255 to L63.
Modify Q’ty per carton and weight.
Modify Q’ty per carton and weight.
Modify Manufactured Date : Year:1~9, for 2010~2019
Update module drawing to Ver1.0
G104V1-T03 Approval Spec was first issued.
Modify the module power consumption
Modify module thickness and weight
Modify Power supply current of white/black pattern and power
consumption
Modify LED converter power supply current and power consumption
3.1
Modify power supply current(min)
450mA -> 390mA, at VCC=3.3V 60Hz white pattern.
360mA -> 290mA, at VCC=5.0V 60Hz white pattern.
420mA -> 370mA, at VCC=3.3V 60Hz black pattern.
330mA -> 280mA, at VCC=5.0V 60Hz black pattern.
3.2
Add cautionary statement to Note(2) about life time vs. operating
conditions.
Modify LED power input connector description. From ACES to Entery
Jul 13,2010
Aug 23,2010
4.1
2.3
Apr 10,2013
3.2
6.1
9.2
9.3
2.4
July 20, 2016
1.1
Version 2.4
Description
Modify LED PWM frequency max value from 200Hz to 20KHz.
Correct the Tv/Tvd/Tvb and Th/Thd/Thb symbol
Modify Figure. 9-1 packing method
Add un-packing method
Updated 1.1 General Overview
20 July 2016
The copyright belongs to InnoLux. Any unauthorized use is prohibited.
3 / 27
PRODUCT SPECIFICATION
1.4
3.2
6.1
7.1
7.2
8
Version 2.4
Modified Module Power Consumption
Modified Converter Power Supply Current & Converter Power
Consumption
Modified Note (2)
Added Note (3)
Modified Test Conditions
Modified Note (2) & (4)
Added Note (5), (6)
20 July 2016
The copyright belongs to InnoLux. Any unauthorized use is prohibited.
4 / 27
PRODUCT SPECIFICATION
1. GENERAL DESCRIPTION
1.1 OVERVIEW
The G104V1-T03 model is a IAV 10.4” TFT-LCD module with white LED Backlight Unit and a 31-pin and
1ch TTL interface. This module supports 640 x 480 VGA mode and display 262,144 colors. The converter
for the LED Backlight Unit is built in.
1.2 FEATURES
- Wide viewing angle
- High contrast ratio
- VGA (640 x 480 pixels) resolution
- Wide operating temperature
- DE (Data Enable) mode
- CMOS/TTL (Transistor-Transistor Logic) interface
- Reversible-scan direction
- RoHS Compliance
- LED Light Bar Replaceable
1.3 APPLICATION
- TFT LCD Monitor
- Industrial Application
- Amusement
1.4 GENERAL SPECIFICATIONS
Item
Diagonal Size
Active Area
Bezel Opening Area
Driver Element
Pixel Number
Pixel Pitch
Pixel Arrangement
Display Colors
Transmissive Mode
Surface Treatment
Module Power Consumption
Version 2.4
Specification
10.4
211.2(H) x 158.4(V)
215.4(H) x 161.8(V)
a-si TFT active matrix
640 x R.G.B. x 480
0.33(H) x 0.33(V)
RGB vertical stripe
262,144
Normally black
Hard coating (3H), Anti-glare (Haze 25%)
7.38
20 July 2016
The copyright belongs to InnoLux. Any unauthorized use is prohibited.
Unit
inch
mm
mm
pixel
mm
color
W
5 / 27
Note
(1)
Typ.
PRODUCT SPECIFICATION
1.5 MECHANICAL SPECIFICATIONS
Item
Min.
Typ.
Max.
Horizontal (H)
225
225.5
226
Module Size
Vertical (V)
175.8
176.3
176.8
Depth (D)
8.84(7.31)
9.34(7.81)
9.84(8.31)
Weight
345
395
445
I/F connector mounting
The mounting inclination of the connector makes
the screen center within ±0.5mm as the horizontal.
position
Unit
mm
mm
mm
g
Note
-
(2)
(1)
-
Note (1) Please refer to the attached drawings for more information of front and back outline dimensions. Module
depth 7.8mm does not include TTL connector, with TTL connector is 9.34mm (typical).
(2) Connector mounting position
+/- 0.5mm
Version 2.4
20 July 2016
The copyright belongs to InnoLux. Any unauthorized use is prohibited.
6 / 27
PRODUCT SPECIFICATION
2. ABSOLUTE MAXIMUM RATINGS
2.1 ABSOLUTE RATINGS OF ENVIRONMENT
Item
Symbol
Operating Ambient Temperature
Storage Temperature
Value
Max.
+80
+80
Min.
-30
-30
TOP
TST
Unit
Note
ºC
ºC
Note (1) Temperature and relative humidity range is shown in the figure below.
(a) 90 %RH Max. (Ta ≦ 40 ºC).
(b) Wet-bulb temperature should be 39 ºC Max. (Ta > 40 ºC).
(c) No condensation.
2.2 ELECTRICAL ABSOLUTE RATINGS
2.2.1 TFT LCD MODULE
Item
Symbol
Power Supply Voltage
VCC
Value
Min.
-0.3
Max.
7
Unit
Note
V
(1)
2.2.2 LED CONVERTER
Item
Symbol
Converter Voltage
Enable Voltage
Backlight Adjust
Vi
EN
ADJ
Value
Min.
-0.3
-----
Max.
18
5.5
5.5
Unit
Note
V
V
V
(1) , (2)
Note (1) Permanent damage to the device may occur if maximum values are exceeded. Function operation
should be restricted to the conditions described under Normal Operating Conditions.
Note (2) Specified values are for LED (Refer to 3.2 for further information).
Version 2.4
20 July 2016
The copyright belongs to InnoLux. Any unauthorized use is prohibited.
7 / 27
PRODUCT SPECIFICATION
3. ELECTRICAL SPECIFICATIONS
Ta = 25 ± 2 ºC
3.1 TFT LCD MODULE
Parameter
Symbol
Power Supply Voltage
VCC
White
Power Supply Current
--Black
Power Consumption
Logic input voltage
PL
VIH
VIL
Value
Unit
Min.
Typ.
Max.
3.0
3.3
3.6
V
4.75
5.0
5.25
V
390
490
540
mA
290
390
440
mA
370
470
520
mA
280
380
430
mA
--- 1.617
--W
0.7VCC
VCC
V
0
- 0.3VCC
V
Note
at VCC=3.3V
at VCC=5.0V
(3)a, at VCC=3.3V, 60Hz
(3)a, at VCC=5.0V, 60Hz
(3)b, at VCC=3.3V, 60Hz
(3)b, at VCC=5.0V, 60Hz
VCC=3.3V, 60Hz
Note (1) The module is recommended to operate within specification ranges listed above for normal function.
Note (2) Measurement Conditions:
+3.3V
Q1 2SK1475
FUSE
Vcc
(LCD Module Input)
1uF
R1
47K
(High to Low)
(Control Signal)
C3
Q2
R2
2SK1470
1K
12V
VR1
47K
C1
C2
0.01uF
1uF
Vcc rising time is 470µs
+3.3V/+5V
0.9Vcc
0.1Vcc
GND
470µs
Version 2.4
20 July 2016
The copyright belongs to InnoLux. Any unauthorized use is prohibited.
8 / 27
PRODUCT SPECIFICATION
Note (3) The specified power supply current is under the conditions at Ta = 25 ± 2 ºC, fv = 60 Hz, where as a
power dissipation check pattern below is displayed.
b. Black Pattern
a. White Pattern
Active Area
Active Area
Version 2.4
20 July 2016
The copyright belongs to InnoLux. Any unauthorized use is prohibited.
9 / 27
PRODUCT SPECIFICATION
Ta = 25 ± 2 ºC
3.2 LED CONVERTER
Parameter
Symbol
Value
Typ.
12.0
Max.
12.6
Unit
Converter Power Supply Voltage
Vi
Min.
10.8
Converter Power Supply Current
Ii
---
0.48
---
A
Converter Power Consumption
Pi
---
5.76
---
W
3.3
--3.3
---
PWM Control Frequency
fPWM
2.0
0
2.0
0
20
190
5.0
0.8
5.0
0.8
100
20K
V
V
V
V
%
Hz
LED Life Time
LL
Backlight on
Backlight off
PWM High Level
PWM Low Level
EN Control Level
PWM Control Level
PWM Control Duty Ratio
200
50,000
V
Note
(Duty 100%)
(1) Vi = 12V
(Duty 100%)
(1) Vi = 12V
(Duty 100%)
Hrs
(2)
Note (1) LED current is measured by utilizing a high frequency current meter as shown below:
Note (2) The lifetime of LED is defined as the time when it continues to operate under the conditions at
Ta = 25 ±2 ℃ and ILED = 70mADC (LED forward current) until the brightness becomes ≦ 50% of its
original value. And minimum LED lifetime is estimated and provided by Nichia in Japan.
Operating LED under high temperature environment will reduce life time and lead to color shift.
Input
Power
Vi, Ii
Power
Supply
Version 2.4
G
LED
Conver
ter
20 July 2016
The copyright belongs to InnoLux. Any unauthorized use is prohibited.
Backlig
ht
10 / 27
PRODUCT SPECIFICATION
+12V
Q1
2SK1475
FUSE
R1
C3
Vi
(LED Converter Input)
1uF
47K
(High to Low)
(Control Signal)
Q2
R2
2SK1470
SW
1K
+12V
VR1
47K
C2
C1
0.01uF
1uF
Vi
rising time is 470us
+12V
90%Vi
10%Vi
GND
470µs
Version 2.4
20 July 2016
The copyright belongs to InnoLux. Any unauthorized use is prohibited.
11 / 27
PRODUCT SPECIFICATION
4. BLOCK DIAGRAM
4.1 TFT LCD MODULE
G0~G5
B0~B5
DE
DPSR
VCC
INPUT CONNECTOR
(DF 9C-31P-1V)
R0~R5
TIMING CONTROLLER
DC/DC CONVERTER &
REFERENCE
EN
TFT LCD PANEL
(640x R.G.B.x480)
DATA DRIVER IC
GND
Vi
ADJ
SCAN DRIVER IC
DCLK
VOLTAGE
CONVERTER CONNECTOR
(3823K-F05N-00L (Entery))
Version 2.4
LED
Converter
LED BACKLIGHT
UNIT
20 July 2016
The copyright belongs to InnoLux. Any unauthorized use is prohibited.
12 / 27
PRODUCT SPECIFICATION
5. INPUT TERMINAL PIN ASSIGNMENT
5.1 TFT LCD MODULE
Pin
Name
Description
1
GND
Ground
2
DCLK
Dot clock
3
N.C.
N.C.
4
N.C.
N.C.
5
GND
Ground
6
R0
Red data (LSB)
7
R1
Red data
8
R2
Red data
9
R3
Red data
10
R4
Red data
11
R5
Red data (MSB)
12
GND
Ground
13
G0
Green data (LSB)
14
G1
Green data
15
G2
Green data
16
G3
Green data
17
G4
Green data
18
G5
Green data (MSB)
19
GND
Ground
20
B0
Blue data (LSB)
21
B1
Blue data
22
B2
Blue data
23
B3
Blue data
24
B4
Blue data
25
B5
Blue data (MSB)
26
GND
Ground
27
DE
Data enable signal
28
VCC
Power supply
29
VCC
Power supply
30
N.C.
Reserved, please keep it floating.
31
DPSR
Selection of scan direction
Note (1) Connector Part No.: DF 9C-31P-1V or equivalent.
Version 2.4
20 July 2016
The copyright belongs to InnoLux. Any unauthorized use is prohibited.
13 / 27
PRODUCT SPECIFICATION
5.2 BACKLIGHT UNIT (Converter connector pin)
Pin
1
2
3
4
5
Symbol
Vi
VGND
EN
ADJ
NC
Description
Converter input voltage
Converter ground
Enable pin
Backlight Adjust
Not Connect
Remark
12V
Ground
PWM Dimming
Note (1) Connector Part No.: 3823K-F05N-00L (Entery) or equivalent
Note (2) User’s connector Part No.: H208K-P05N-02B (Entery) or equivalent
5.3 COLOR DATA INPUT ASSIGNMENT
The brightness of each primary color (red, green and blue) is based on the 6-bit gray scale data input for
the color. The higher the binary input, the brighter the color. The table below provides the assignment of
color versus data input.
Color
Red
R5 R4 R3 R2 R1
Black
0
0
0
0
0
Red
1
1
1
1
1
Green
0
0
0
0
0
Basic Blue
0
0
0
0
0
Colors Cyan
0
0
0
0
0
Magenta
1
1
1
1
1
Yellow
1
1
1
1
1
White
1
1
1
1
1
Red(0)/Dark 0
0
0
0
0
Red(1)
0
0
0
0
0
Gray
Red(2)
0
0
0
0
1
Scale
:
:
:
:
:
:
Of
:
:
:
:
:
:
Red
Red(61)
1
1
1
1
0
Red(62)
1
1
1
1
1
Red(63)
1
1
1
1
1
Green(0)/Dark 0
0
0
0
0
Green(1)
0
0
0
0
0
Gray
Green(2)
0
0
0
0
0
Scale
:
:
:
:
:
:
Of
:
:
:
:
:
:
Green Green(61)
0
0
0
0
0
Green(62)
0
0
0
0
0
Green(63)
0
0
0
0
0
Blue(0)/Dark 0
0
0
0
0
Blue(1)
0
0
0
0
0
Gray
Blue(2)
0
0
0
0
0
Scale
:
:
:
:
:
:
Of
:
:
:
:
:
:
Blue
Blue(61)
0
0
0
0
0
Blue(62)
0
0
0
0
0
Blue(63)
0
0
0
0
0
Data Signal
Green
R0 G5 G4 G3 G2 G1
0
0
0
0
0
0
1
0
0
0
0
0
0
1
1
1
1
1
0
0
0
0
0
0
0
1
1
1
1
1
1
0
0
0
0
0
1
1
1
1
1
1
1
1
1
1
1
1
0
0
0
0
0
0
1
0
0
0
0
0
0
0
0
0
0
0
:
:
:
:
:
:
:
:
:
:
:
:
1
0
0
0
0
0
0
0
0
0
0
0
1
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
1
:
:
:
:
:
:
:
:
:
:
:
:
0
1
1
1
1
0
0
1
1
1
1
1
0
1
1
1
1
1
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
:
:
:
:
:
:
:
:
:
:
:
:
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
G0
0
0
1
0
1
0
1
1
0
0
0
:
:
0
0
0
0
1
0
:
:
1
0
1
0
0
0
:
:
0
0
0
B5
0
0
0
1
1
1
0
1
0
0
0
:
:
0
0
0
0
0
0
:
:
0
0
0
0
0
0
:
:
1
1
1
B4
0
0
0
1
1
1
0
1
0
0
0
:
:
0
0
0
0
0
0
:
:
0
0
0
0
0
0
:
:
1
1
1
B3
0
0
0
1
1
1
0
1
0
0
0
:
:
0
0
0
0
0
0
:
:
0
0
0
0
0
0
:
:
1
1
1
Blue
B2 B1
0
0
0
0
0
0
1
1
1
1
1
1
0
0
1
1
0
0
0
0
0
0
:
:
:
:
0
0
0
0
0
0
0
0
0
0
0
0
:
:
:
:
0
0
0
0
0
0
0
0
0
0
0
1
:
:
:
:
1
0
1
1
1
1
Note (1) 0: Low Level Voltage, 1: High Level Voltage
Version 2.4
20 July 2016
The copyright belongs to InnoLux. Any unauthorized use is prohibited.
14 / 27
B0
0
0
0
1
1
1
0
1
0
0
0
:
:
0
0
0
0
0
0
:
:
0
0
0
0
1
0
:
:
1
0
1
PRODUCT SPECIFICATION
6. INTERFACE TIMING
6.1 INPUT SIGNAL TIMING SPECIFICATIONS
The input signal timing specifications are shown as the following table and timing diagram.
Signal
Item
Frequency
Dot Clock
Symbol
Fc
Duty
Setup Time
Tlvs
Dot Data
Hold Time
Tlvh
Frame Rate
Fr
Total
Th
Horizontal Active Display Term
Display
Thd
Blank
Thb
Total
Tv
Vertical Active Display Term
Display
Tvd
Blank
Tvb
Note:(1)This module is operated by DE only mode
Min.
Typ.
21
25.175
0.4
8
12
730
0.5
60
800
640
160
525
480
45
90
485
5
Max.
29
0.6
900
260
800
320
Unit
Note
MHz
-
ns
ns
Hz
Th
Th
Th
Tc
Tc
Tc
Th=Thd+Thb
Tv=Tvd+Tvb
-
(2) Frame rate is 60Hz
(3) The Tv(Tvd+Tvb) must be integer, otherwise, this module would operate abnormally.
INPUT SIGNAL TIMING DIAGRAM
Version 2.4
20 July 2016
The copyright belongs to InnoLux. Any unauthorized use is prohibited.
15 / 27
PRODUCT SPECIFICATION
6.2 POWER ON/OFF SEQUENCE
To prevent a latch-up or DC operation of LCD module, the power on/off sequence should follow the conditions
shown in the following diagram.
0.9VCC
VCC
0.9VCC
90%
0.1VCC
0.1VCC
10%
T7
T1
T2
T3
VALID
LVDS
Vi
T4
0.9Vi
0.9Vi
0.1Vi
0.1Vi
T6
T5
90%
BL
ON/OFF
10%
T8
T9
90%
PWM DIMMING
10%
Power ON/OFF sequence
Note (1) Please avoid floating state of interface signal at invalid period.
Note (2) When the interface signal is invalid, be sure to pull down the power supply of LCD VCC to 0 V.
Note (3) The Backlight converter power must be turned on after the power supply for the logic and the
interface signal is valid. The Backlight converter power must be turned off before the power supply
for the logic and the interface signal is invalid.
Parameter
Value
Typ
T1
0.5
-
10
ms
T2
0
-
50
ms
T3
0
-
50
ms
T4
500
-
-
ms
T5
200
-
-
ms
T6
20
-
-
ms
T7
5
-
300
ms
T8
10
-
-
ms
T9
10
-
-
ms
Version 2.4
Max
Units
Min
20 July 2016
The copyright belongs to InnoLux. Any unauthorized use is prohibited.
16 / 27
PRODUCT SPECIFICATION
6.3 SCANNING DIRECTION
The following figures show the image see from the front view. The arrow indicates the direction of scan.
Figure1.Normal scan (DPSR : Low or Open )
Version 2.4
Figure 2. Reverse scan (DPSR : High )
20 July 2016
The copyright belongs to InnoLux. Any unauthorized use is prohibited.
17 / 27
PRODUCT SPECIFICATION
7. OPTICAL CHARACTERISTICS
7.1 TEST CONDITION
Item
Value
o
Ambient Temperature (Ta)
25±2
Ambient Humidity (Ha)
50±10
Supply Voltage
Input Signal
Unit
C
%RH
According to typical value in "ELECTRICAL
CHARACTERISTICS"
LED Light Bar Input Current Per Input Pin
7.2 OPTICAL SPECIFICATION
The relative measurement methods of optical characteristics are shown in 7.2. The following items should
be measured under the test conditions described in 7.1 and stable environment shown in Note (5).
Item
Symbol
Rx
Red
Ry
Gx
Green
Color
Gy
Chromaticity
Bx
Blue
By
Wx
White
Wy
Center Luminance of White
LC
Contrast Ratio
CR
TR
Response Time
TF
White Variation
δW
θx+
Horizontal
θxViewing
Angle
θY+
Vertical
θY-
Version 2.4
Condition
θx=0°, θY =0°
CS-1000
θx=0°, θY =0°
θx=0°, θY =0°
CR≥10
Min.
Typ 0.05
450
1000
80
80
80
80
Typ. Max.
0.619
0.357
0.333
0.562 Typ +
0.145 0.05
0.092
0.313
0.329
500
1500
14
19
9
14
1.4
88
88
88
88
-
20 July 2016
The copyright belongs to InnoLux. Any unauthorized use is prohibited.
Unit
ms
ms
Deg.
18 / 27
Note
(1), (5)
(4), (5)
(2), (5)
(3)
(5), (6)
(1), (5)
PRODUCT SPECIFICATION
Note (1) Definition of Viewing Angle (θx, θy):
Normal
θx = θy = 0º
θ
θX- =
θ
x
θ
6
12
y
o’clock
direction
θ
y
θX+ =
x
o’clock
Note (2) Definition of Contrast Ratio, (CR):
The contrast ratio can be calculated by the following expression.
Contrast Ratio, CR = L63 / L0
L63: Luminance of gray level 63
L 0: Luminance of gray level 0
CR = CR (5)
CR (X) is corresponding to the Contrast Ratio of the point X at Figure in Note (6).
Note (3) Definition of Response Time (TR, TF) and measurement method:
Gray Level 63
1
Gray Level 63
0
0
Optical
%
Response
9
Gray Level
0
%
Ti
T
T
66.6
66.6
Version 2.4
20 July 2016
The copyright belongs to InnoLux. Any unauthorized use is prohibited.
19 / 27
PRODUCT SPECIFICATION
Note (4) Definition of Luminance of White (LC):
Measure the luminance of gray level 63 at center point and 5 points
LC = L (5), where L (X) is corresponding to the luminance of the point X at the figure in Note (6).
Note (5) Measurement Setup:
The LCD assembly should be stabilized at given temperature for 30 minutes to avoid abrupt
temperature change during measuring. In order to stabilize the luminance, the measurement
should be executed after lighting Backlight for 30 minutes in a windless room.
LCD
LCD Panel
USB200
CS-1000T
Field of View = 2º
Center of the Screen
Light Shield Room
500 mm
(Ambient Luminance < 2 lux)
Note (6) Definition of White Variation (δW):
Measure the luminance of gray level 63 at 5 points
δW = Maximum [L (1), L (2), L (3), L (4), L (5)] / Minimum [L (1), L (2), L (3), L (4), L (5)]
Horizontal Line
D
Vertical Line
D/4
W/4
1
W/2
W
D/2
3D/4
2
X
5
: Test Point
X=1 to 5
3W/4
3
4
Active Area
Version 2.4
20 July 2016
The copyright belongs to InnoLux. Any unauthorized use is prohibited.
20 / 27
PRODUCT SPECIFICATION
8. RELIABILITY TEST CRITERION
Test Item
High Temperature Storage Test
Low Temperature Storage Test
Thermal Shock Storage Test
High Temperature Operation Test
Low Temperature Operation Test
Test Condition
80ºC, 240 hours
-30ºC, 240 hours
-30ºC, 0.5hour←→80℃, 0.5hour; 100cycles, 1hour/cycle
80ºC, 240 hours
-30ºC, 240 hours
High Temperature & High Humidity
60ºC, 90%RH, 240hours
Operation Test
Shock (Non-Operating)
Vibration (Non-Operating)
200G, 2ms, half sine wave, 1 time for ± X, ± Y, ± Z.
1.5G, 10 ~ 300 Hz, 10min/cycle, 3 cycles each X, Y, Z
Note
(1)
(2)
(4)
(5)
(1)
(2)
(4)
(6)
(3) (4)
(3) (4)
Note (1) There should be no condensation on the surface of panel during test.
Note (2) Temperature of panel display surface area should be 85 ºC Max.
Note (3) At testing Vibration and Shock, the fixture in holding the module has to be hard and rigid enough so that
the module would not be twisted or bent by the fixture.
Note (4) In the standard conditions, there is no function failure issue occurred. All the cosmetic specification
is judged before reliability test.
Note (5) Before cosmetic and function test, the product must have enough recovery time, at least 2 hours at room
temperature.
Note (6) Before cosmetic and function test, the product must have enough recovery time, at least 24 hours at room
temperature.
Version 2.4
20 July 2016
The copyright belongs to InnoLux. Any unauthorized use is prohibited.
21 / 27
PRODUCT SPECIFICATION
9. PACKING
9.1 PCAKING SPECIFICATIONS
(1) 18pcs LCD modules / 1 Box
(2) Box dimensions: 465 (L) X 362 (W) X 314 (H) mm
(3) Weight: approximately 11.23Kg (18 modules per box)
9.2 PACKING METHOD
Figure. 9-1 Packing method
Version 2.4
20 July 2016
The copyright belongs to InnoLux. Any unauthorized use is prohibited.
22 / 27
PRODUCT SPECIFICATION
Air Transportation
Sea / Land Transportation (40ft Container)
Figure. 9-2 Packing method
9.3 UN-PACKING METHOD
Figure. 9-3 UN-Packing method
Version 2.4
20 July 2016
The copyright belongs to InnoLux. Any unauthorized use is prohibited.
23 / 27
PRODUCT SPECIFICATION
10. DEFINITION OF LABEL
10.1 INX MODULE LABEL
The barcode nameplate is pasted on each module as illustration, and its definitions are as following explanation.
E207943
G104V1 -T03
Rev.XX
MADE IN TAIWAN
RoHS
XXXXXXXYMDLNNNN
(a) Model Name: G104V1 –T03
(b) Revision: Rev. XX, for example: A1, …C1, C2 …etc.
(c) Serial ID: X X X X X X X Y M D X N N N N
Serial No.
INX Internal Use
Year, Month, Date
INX Internal Use
Revision
INX Internal Use
Serial ID includes the information as below:
(a) Manufactured Date: Year: 0~9, for 2010~2019
Month: 1~9, A~C, for Jan. ~ Dec.
Day: 1~9, A~Y, for 1st to 31st, exclude I , O and U
(b) Revision Code: cover all the change
(c) Serial No.: Manufacturing sequence of product
Version 2.4
20 July 2016
The copyright belongs to InnoLux. Any unauthorized use is prohibited.
24 / 27
PRODUCT SPECIFICATION
11. PRECAUTIONS
11.1 ASSEMBLY AND HANDLING PRECAUTIONS
(1) Do not apply rough force such as bending or twisting to the module during assembly.
(2) To assemble or install module into user’s system can be only in clean working areas. The dust and oil
may cause electrical short or worsen the polarizer.
(3) It’s not permitted to have pressure or impulse on the module because the LCD panel and Backlight will
be damaged.
(4) Always follow the correct power sequence when LCD module is connecting and operating. This can
prevent damage to the CMOS LSI chips during latch-up.
(5) Do not pull the I/F connector in or out while the module is operating.
(6) Do not disassemble the module.
(7) Use a soft dry cloth without chemicals for cleaning, because the surface of polarizer is very soft and
easily scratched.
(8) It is dangerous that moisture come into or contacted the LCD module, because moisture may damage
LCD module when it is operating.
(9) High temperature or humidity may reduce the performance of module. Please store LCD module within
the specified storage conditions.
(10) When ambient temperature is lower than 10ºC may reduce the display quality, the response time will
become slowly.
(11) Do not keep same pattern in a long period of time. It may cause image sticking on LCD.
11.2 SAFETY PRECAUTIONS
(1) Do not disassemble the module or insert anything into the Backlight unit.
(2) If the liquid crystal material leaks from the panel, it should be kept away from the eyes or mouth. In case
of contact with hands, skin or clothes, it has to be washed away thoroughly with soap.
(3) After the module’s end of life, it is not harmful in case of normal operation and storage.
Version 2.4
20 July 2016
The copyright belongs to InnoLux. Any unauthorized use is prohibited.
25 / 27
PRODUCT SPECIFICATION
12. MECHANICAL CHARACTERISTICS
Version 2.4
20 July 2016
The copyright belongs to InnoLux. Any unauthorized use is prohibited.
26 / 27
PRODUCT SPECIFICATION
Version 2.4
20 July 2016
The copyright belongs to InnoLux. Any unauthorized use is prohibited.
27 / 27
A L L T EC H N O LO G I ES . A L L CO M P E T E N C I ES . O N E S P EC I A L I ST.
DATA MODUL AG
Landsberger Straße 322
DE-80687 Munich
Phone: +49-89-56017-0
DATA MODUL WEIKERSHEIM GMBH
Lindenstraße 8
DE-97990 Weikersheim
Phone: +49-7934-101-0
More information and worldwide locations can be found at
www.data-modul.com
Download PDF
Similar pages