22" Touchscreen
LED Monitor
USER'S GUIDE
Content
Operation Instructions ...........................................................................................................1
Unpacking Instructions ..........................................................................................................2
Safety Precautions .................................................................................................................2
Front View of the Product.......................................................................................................3
Rear View of the Product ........................................................................................................4
Quick Installation...................................................................................................................5
Basic Operation and Calibration/Reset Instructions ..................................................................6
Advanced Operation—OSD Menu ..........................................................................................8
Supporting Timing Modes....................................................................................................11
Technical Information ..........................................................................................................12
Wall-Mount Installation Instructions......................................................................................13
Troubleshooting..................................................................................................................14
Planar Support ....................................................................................................................15
Operation Instructions
Thank you for purchasing the multi-touch LED LCD monitor. Please read this guide thoroughly
before installation.
FCC RADIO FREQUENCY INTERFERENCE STATEMENT
WARNING: (FOR FCC CERTIFIED MODELS)
This TFT LED LCD monitor has been tested and found compliant with the limits for a Class B
digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide proper
protection against harmful interference to a residential installation. This TFT Touchscreen LED
LCD monitor generates, uses, and can radiate radio frequency energy. Harmful interference to
radio communication may be the result if it‘s not properly installed and used. However, there is
no guarantee that interference will not occur in a particular installation. If this TFT Touchscreen
LED LCD monitor does cause serious interference to radio or television reception, resetting may
correct it. Moreover, users are encouraged to reduce interference by doing one or more of the
following:
 Reorient or relocate the receiving antenna.
 Move the TFT Touchscreen LED LCD monitor and the receiver further away from each other.
 Connect the TFT Touchscreen LED LCD monitor into an outlet on a circuit different from
that to which the receiver is connected.
 Consult your local dealer or a qualified technician.
FCC Warning:
To assure a continued FCC compliance, a user must use a grounded power supply cord and the
provided shielded video interface cable with bonded ferrite cores. Also, any unauthorized
changes or modifications to this TFT Touchscreen LED LCD monitor would void the user‘s
authority to operate this device.
Note: If necessary, shielded interface cables and AC power cord must be used to meet the
emission level limits.
According to WEEE regulation, this Touchscreen LED Monitor can't be handled as normal trash in Europe
when it is out of usage. Please refer to the recycle information on Planar’s website to handle it.For more
information on how to recycle your product, please visit WWW.PLANARSYSTEMS.COM/GREEN
1
Unpacking Instructions
 Move the LED LCD monitor out of the package and take off the plastic bag and Polystyrene Foam.
 Pull the base from Parallel versus Panel to Vertical.
 Adjust the Panel between 0° leaning forward and 20° leaning backward.
Safety Precautions
Follow all warnings, precautions and maintenance as recommended in this user’s manual to
maximize the life of your unit.
Do:
 Turn off the product before cleaning.
 Touch screen surface may be cleaned using a soft clean cloth moistened with mild window
glass commercial cleaners or 50/50 mixture of water and isopropyl alcohol.
 Use a soft cloth moistened with mild detergent to clean the display housing.
 Disconnect the power plug from AC outlet if the product is not going to be used for an
extended period of time.
Don’t:
 Do not touch the LED Display screen surface with sharp or hard objects.
 Do not use abrasive cleaners, waxes or solvents for your cleaning.
 Do not operate the product under the following conditions:
o Extremely hot, cold or humid environment.
o Areas susceptible to excessive dust and dirt.
o Near any appliance generating a strong magnetic fi eld.
o In direct sunlight.
 If smoke, abnormal noise or odor emits from your TFT Touchscreen LED LCD monitor, remove
the power cord immediately and call your service center.
 Never remove the rear cover of your TFT Touchscreen LED LCD monitor. The display unit inside
contains high-voltage parts and may cause electric shock.
 Never try to repair your TFT Touchscreen LED LCD monitor yourself. Always call your service
center or a qualified technician to fix it.
1
2
Front View of the Product
① ② ③ ④ ⑤ ⑥
①
OSD Turn On/ Off
②
Volume Adjust/ Scroll Down/ Adjust Decrease
③
Preset Mode/ Scroll UP/ Adjust Increase
④
Input select/ Confirm Selection
⑤
Power On/ Off
⑥
LED Indicator
3
Rear View of the Product
⑦
⑦
Power Input
⑧
USB – Type A to B
⑨
Headphone Jack
⑩
Audio Input
⑪
HDMI Input(HDMI 19 pin)
⑫
DVI Input (DVI 24 pin)
⑬
VGA Input (D-Sub 15 pin)
⑧
⑨ ⑩ ⑪
4
⑫
⑬
Quick Installation
1. Connect either VGA, DVI or HDMI Video Source from the monitor to the computer. Make sure
both monitor and computer are powered OFF.
2. Connect the audio cable from audio output of computer to the audio input of the monitor.
3. Connect the USB cable from the computer to the monitor.
4. Connect power cord to a properly grounded AC outlet, and then to the monitor.
5. Power-ON computer and then POWER-ON the monitor
6. Set the timing mode on your computer. Recommended resolution and refresh rate is 1920 x
1080 @ 60Hz.
Figure 1:
PC
5
Basic Operation and Calibration/Reset Instructions
Before using the TFT Touchscreen LED LCD monitor:
 Connect external equipment properly.
 Insert the power plug, and the power LED indicator will light orange.
Power On/Off
To turn the TFT Touchscreen LED LCD monitor on/off:
Press POWER button on the front. The power LED indicator light will be blue when the TFT
Touchscreen LED LCD monitor is on.
Using the OSD Menu
Use OSD menus to adjust settings by using the menu button on the front of the TFT Touchscreen
LED LCD monitor.
1
2
▼
▲
▼+▲
Displays main menu
Exits from OSD menu
Selects between VGA, DVI, HDMI or Auto mode
Select the desired item when in OSD menu
When not in OSD menu, directly enters Volume adjust
Select the desired item when in OSD menu
When not in OSD menu, directly enters Preset Mode
Recalls both Contrast and Brightness (when not in OSD menu)
OSD Lock Out Function
When TFT Touchscreen LED LCD monitor is in normal mode, the “OSD Lock Out” function can be
enabled.
Option 1: OSD lock – all 4 buttons are locked except the “POWER” button.
Press and hold the 1 button and the ▲ button for 10 seconds to lock the OSD buttons.
The TFT Touchscreen LED LCD monitor will show an “OSD Lock Out” message for 3 seconds and
the message will disappear automatically.
Repeat this step to unlock.
6
Option 2: OSD & Power button lock – all 5 buttons including the “POWER” button are locked.
Press and hold the 1 button and the ▼ button for 10 seconds to lock all 5 buttons.
The TFT Touchscreen LED LCD monitor will show a “Lock Out” message for 3 seconds and the
message will disappear automatically.
Repeat this step to unlock.
PXL2230MW Calibration/Reset Instructions:
The PXL2230MW is available with USB connection. It is Microsoft® Windows® 7 HID (Human
Interface Device) compatible if you use the USB touch screen interface. No additional software
driver is required. Calibration is a simple process and can be invoked by running Tablet PC
Settings from Control Panel and clicking the Calibrate button.
Click the Reset button to reset the touchscreen to the factory calibration settings. To reset the
existing calibration data, click "Reset" in the Tablet PC Settings window.
7
Advanced Operation—OSD Menu
You can use the OSD menu to adjust various settings for your TFT Touchscreen LED LCD monitor.
Press the 1 button to display the OSD Menu, and use ▲▼ to select the desired OSD menu.
Short Cuts Function from the button(s)
Auto Image Adjust: To auto adjust Horizontal Position, Vertical Position, Phase (Fine
Tune) and Clock (H. Size) of the screen.
Contrast: To adjust the foreground white level of screen image.
▲: increase contrast, ▼: decrease contrast.
Brightness: To adjust the luminance of the video.
▲: increase brightness, ▼: decrease brightness.
ECO Mode : Allows the user to turn the ECO On or Off. Contrast and Brightness
adjustment disabled when ECO is active.
Input Select: When Input Select is pressed, change Input signal to VGA, DVI, HDMI or
Auto.
Audio Adjust: To adjust the audio functions.
Volume: To adjust the volume of speaker output.
Mute: To turn the Mute ON/OFF.
HDMI Audio: To select HDMI or Line in.(Only HDMI)
8
Color Adjust: To select the color for improving brightness and color saturation
between 9300K, 6500K, 5400K, and User Color.
9300K: Adds blue to screen image for cooler white.
6500K: Adds red to screen image for warmer white and richer red.
5400K: Adds green to screen image for a darker color.
User Color: Individual adjustments for red (R), green (G), blue (B).
1. Press button 2 to select the desired color.
2. Press ▼ or ▲ button to adjust selected color.
Information: To display the information, regarding the current input signal coming
from the graphic card in your computer.
Note: See your graphic card user guide for more information about changing the
resolution and refresh rate.
Manual Image Adjust: To manually adjust the Horizontal Size, H. /V. position, Fine Tune,
Sharpness, Video Mode adjust and Preset Mode.
Horizontal Size: To adjust the width of the screen image.
▼: decrease the width of screen image, ▲: increase the width of screen image.
H./V. Position: To adjust the horizontal and vertical position of the video.
H. Position: ▲: move screen to the right, ▼: move screen to the left.
V. Position: ▲: move screen up, ▼: move screen down.
Fine Tune: To adjust the delay time of data and clock.
Press ▼ or ▲ to adjust to your preference.
Sharpness: To adjust the clarity of a non-Full HD Resolution (1920x1080) signal with ▼
or ▲ button.
Video Mode Adjust: To select the video mode from Full Screen, Over Screen.
Full Screen: To select full-screen size image.
Over Screen: To select over-screen size image.
Aspect Ratio: To select input timing image size.
Preset Mode: Provides an optimum display environment depending on the contents
displayed. It contains 5 user-selectable presets.
Standard is for general windows environment and monitor default setting.
Game optimized for PC game environment.
Cinema optimized for movie and video environment.
Scenery optimized for displaying outdoor scenery images.
Text optimized for text editing and viewing in a word processing environment.
9
Setup Menu: To set up Language, OSD Position, OSD Time Out and OSD Background.
Language Select: To allow users to choose from available languages.
OSD Position: Press ▼ or ▲ button to select between horizontal and vertical OSD
Position adjustment.
H. Position: To horizontally adjust the OSD position.
▲: move OSD to the right, ▼: move OSD to the left.
V. Position: To vertically adjust the OSD position.
▲: move OSD up, ▼: move OSD down.
OSD Time Out: To automatically turn off On Screen Display (OSD) after a preset period
of time.
OSD Background: Allows the user to turn the OSD background On or Off.
Memory Recall: To recall factory settings for Video & Audio controls.
Press button 2 to select the Memory Recall menu option.
10
Supporting Timing Modes
STANDARD
VGA
VGA
MAC
VESA
VESA
VESA
VESA
VESA
VESA
MAC
VESA
VESA
VESA
VESA
VESA
MAC
VESA
VESA
VESA
VESA
CVT
VESA
VESA
VESA
RESOLUTION
720 x 400 @ 70Hz
640 x 480 @ 60Hz
640 x 480 @ 67Hz
640 x 480 @ 72Hz
640 x 480 @ 75Hz
800 x 600 @ 56Hz
800 x 600 @ 60Hz
800 x 600 @ 72Hz
800 x 600 @ 75Hz
832 x 624 @ 75Hz
1024 x 768 @ 60Hz
1024 x 768 @ 70Hz
1024 x 768 @ 75Hz
1280 x 960 @ 60Hz
1152 x 864 @ 75Hz
1152 x 870 @ 75Hz
1280 x 1024 @ 60Hz
1280 x 1024 @ 75Hz
1440 x 900 @ 60Hz
1440 x 900 @ 75Hz
1400 x 1050 @ 60Hz
1600 x 1200 @ 60Hz
1680 x 1050 @ 60Hz
1920 x 1080 @ 60Hz
Note:
1. DVI supports 480i, 480p, 576i, 576p, 720p, 1080i, and 1080p.
2. Simultaneously press 1 and 2 keys on monitor panel to switch between similar PC timings.
Similar PC Timing on list below:
 720 x 400 @ 70Hz / 640 x 400 @70Hz
 1400 x 1050 @ 60Hz / 1680 x 1050 @ 60Hz
 720 x 480 @ 60Hz / 640 x 480 @ 60Hz
Warning: Do not set the graphic card in your computer to exceed these maximum refresh rates.
Doing so may result in permanent damage to your monitor.
11
Technical Information
LCD Panel
21.5” TFT (with LED backlight)
Power Management
On: 25 Watts (typical),30 Watts (maximum)
Standby Mode : < 0.5 Watt
Off: < 0.5 Watt
Displayable Resolution
Full HD 1920 x 1080 max. Vertical Frequency 60Hz max.
Pixel Dimension
0.24825 x 0.24825 mm
LCD Display Color
16.7M
Tilt
5° (+0/-2) ~ 38° (+/-2)
Active Display Area
476.64 mm x 268.11 mm
Temperature
Operating: 0°C ~ +40°C
Storage: -20°C ~ + 60°C
Compliance
FCC, CE, WEEE, UL, cUL
Power
Input Voltage AC100-240 V
Speaker
1W x 2
Touchscreen Technology
Optical Touch
Touchscreen Interface
USB
Touch Method
Finger(s) and stylus input
Supported O/S
Microsoft Windows® 7
12
Wall-Mount Installation Instructions
Wall Mount Arm not included
Turn the power OFF then disconnect the cables from the TFT
Touchscreen LED LCD monitor before performing the
procedure below.
1. Lay the TFT Touchscreen LED LCD monitor face down on a
soft surface.
2. Remove the 4 screws holding the stand to the hinge.
3. Remove the stand.
4. Follow instructions included with the Wall Mount Kit.
NOTE
100mmx100mm VESA hole pattern (n=4), M4, pitch =0.7 mm
100mm x 100mm Screw
Mounting Options
13
Troubleshooting
No power
 Make sure A/C power cord is securely connected to the power adapter and the power supply
is firmly connected to the TFT Touchscreen LED LCD monitor.
 Plug another electrical device into the power outlet to verify that the outlet is supplying
proper voltage.
 Make sure all signal cables are installed.
Power on but no screen image
 Make sure the video cable supplied with the TFT Touchscreen LED LCD monitor is tightly
secured to the video output port on back of the computer. If not, tightly secure it.
 Adjust brightness.
Wrong or abnormal colors
 If any colors (red, green, blue) are missing, check the video cable to make sure it is securely
connected. Loose or broken pins in the cable connector could cause an improper connection.
 Connect the TFT Touchscreen LED LCD monitor to another computer.
14
Planar Support
Cables, Replacement Lamps, Accessories
To find cables, replacement lamps and accessories for your LED LCD monitor, touch screen or
other Planar products visit our online store at www.PlanarOnline.com or find other stores who
carry Planar products at http://www.planar.com/howtobuy
Technical Support
Visit Planar at http://www.planar.com/support for product registration, operations manuals,
touch screen drivers, warranty information and access to Planar's Technical Library for online
troubleshooting. To speak with Planar Customer Support please have you model and serial
number available and dial:
Planar Support
Tel: 1-866-PLANAR1 (866-752-6271) or +1 503-748-5799 outside the US.
Hours: 24 hours a day, 7 days a week.
Toll or long distance charges may apply.
15
2013
020-1024-01A
P/N:2001171303T
Download PDF
Similar pages