HP ProLiant DL160 Generation 8 (Gen8)

QuickSpecs
HP ProLiant DL160 Generation 8 (Gen8)
Overview
The HP ProLiant DL160 Gen8 is a dual-socket, high-performance, dense rack server with enhanced manageability and scalability suited
for High Performance Computing (HPC) environments, web serving and other hyperscale environments.
Front View:
1.
Access panel
2.
Power supply (500 Watts multi-output - standard, common
slot power supply factory installable options available)
3.
Up to two Intel® Xeon® E5-2600 Series processors
4.
FlexibleLOM slot
5.
Up to 24 DIMM slots: DDR3 Registered (RDIMM), Load
Reduced (LRDIMM) or Unbuffered (UDIMM) memory
6.
Optical Disk Drive Bay
7.
Serial label pull tab
8.
(2) Front USB connectors
9.
UID LED button
10. Power On/Standby button
11. Health LED
12. Aggregate network LED
13. Up to 4 LFF SAS/ SATA Hard drives
14. Up to seven Non hot plug redundant Fans
Rear View:
1.
PCIe 3.0 I/O slot
2.
Integrated Lights-Out Management Engine port
3.
4.
5.
1 GbE LAN port for NIC 1 (RJ-45)
1 GbE LAN port for NIC 1 (RJ-45)
Torx tool
6.
7.
8.
9.
10.
11.
Power supply cable socket
Serial connector
Video connector
USB connectors
UID LED button
FlexibleLOM slot
What's New
Support for 12G SAS High Endurance Hot Plug SFF (2.5-inch) Enterprise Performance and Enterprise Mainstream Solid State
Drives
DA - 14282 North America — Version 24 — April 18, 2014
Page 1
QuickSpecs
HP ProLiant DL160 Generation 8 (Gen8)
Standard Features
NOTE: For the Standard Features shipped in the "Factory Integrated Models", please see the "Configuration Information - Factory
Integrated Models" section.
Processor
Eight -Core Processors
One of the following
Intel® Xeon® E5-2680 (2.7GHz/8-core/20MB/8GT-s QPI/130W, DDR3-1600, HT, Turbo2- 4/4/5/5/5/7/8/8)
depending on Model
Intel® Xeon® E5-2670 (2.6GHz/8-core/20MB/8GT-s QPI/115W, DDR3-1600, HT, Turbo2- 4/4/5/5/6/6/7/7)
Intel® Xeon® E5-2665 (2.4GHz/8-core/20MB/8GT-s QPI/115W, DDR3-1600, HT, Turbo2- 4/4/5/5/6/6/7/7)
Intel® Xeon® E5-2660 (2.2GHz/8-core/20MB/8GT-s QPI/95W, DDR3-1600, HT, Turbo2- 5/5/6/6/7/7/8/8)
Intel® Xeon® E5-2650 (2.0GHz/8-core/20MB/8GT-s QPI/95W, DDR3-1600, HT, Turbo2- 4/4/5/5/5/7/8/8)
Intel® Xeon® E5-2650L (1.8GHz/8-core/20MB/8.0 GT-s QPI/70W, DDR3-1600, HT, Turbo22/2/3/3/4/4/5/5)
Six-Core Processors
Intel® Xeon® E5-2667 (2.9GHz/6-core/15MB/8GT-s QPI/130W, DDR3-1600, HT, Turbo2- 3/3/3/4/5/6)
Intel® Xeon® E5-2640 (2.5GHz/6-core/15MB/7.2GT-s QPI/95W, DDR3-1333, HT, Turbo2- 3/3/4/4/5/5)
Intel® Xeon® E5-2630 (2.3GHz/6-core/15MB/7.2GT-s QPI/95W, DDR3-1333, HT, Turbo2- 3/3/4/4/5/5)
Intel® Xeon® E5-2630L (2.0GHz/6-core/15MB/8.0GT-s QPI/60W, DDR3-1333, HT, Turbo2- 3/3/4/4/5/5)
Intel® Xeon® E5-2620 (2.0GHz/6-core/15MB/7.2GT-s QPI/95W, DDR3-1333, HT, Turbo2- 3/3/4/4/5/5)
Quad- Core Processors
Intel® Xeon® E5-2609 (2.4GHz/4-core/10MB/6.4GT-s QPI/80W)
Intel® Xeon® E5-2603 (1.8GHz/4-core/10MB/6.4GT-s QPI/80W)
NOTE: Up to 2 processors supported.
NOTE: HT indicates that the processor model supports Intel® Hyper-Threading Technology.
NOTE: Turbo 2 indicates the maximum potential bin increments when using Intel® Turbo Boost
Technology, with 8, 7,6,5,4,3,2 and 1 cores active DDR3 speed is the maximum memory speed of the
processor. Actual memory speed may depend on the quantity and type of DIMMs installed (options for
1600, 1333, 1066MHz).
NOTE: For the Intel® C600 Chipset E5-2600 Series, the letter preceding the model number indicates the
Product Line (E3, E5, E7); 2600x v#, 2 = number of CPUs in a Node, 6 is socket/segment designation, 00 =
Processor SKU, x = L for low power SKUs and v# (not yet designated) = version number.
Cache Memory
One of the following
depending on Model
20MB (1x20MB) Level 3
NOTE: For Eight-core processors.
15MB (1x15MB) Level 3
NOTE: For Six-core processors.
10MB (1x10MB) Level 3
NOTE: For Quad-core processors.
5MB (1x5MB) Level 3
NOTE: For Dual-core processors.
NOTE: All processor models above list the L3 Cache associated with that particular processor.
DA - 14282 North America — Version 24 — April 18, 2014
Page 2
QuickSpecs
HP ProLiant DL160 Generation 8 (Gen8)
Standard Features
Chipset
Intel® C600 Chipset
Intel® E5-2600 processor Family
NOTE: For more information regarding Intel® chipsets, please see the following URL:
http://www.intel.com/products/server/chipsets/
Upgradeability
Upgradeable to two processors (16 Cores)
Up to 24 DIMM slots available for higher Memory capacity
Up to 8 SFF Hard Drive Bays; Or 4 LFF Drive Bay
2 PCIe Generation 3 IO slots for additional communications and storage expansion
Optical Drive Bay
On System Management
Chipset
HP iLO (Firmware: HP iLO 4)
NOTE: For more information, visit: http://www.hp.com/go/ilo.
Memory Protection
Advanced memory protection
Lockstep Mode
Memory
One of the following
depending on Model
Type
HP SmartMemory
PC3-10600R Registered DDR3 (1333MHz)
24 DIMM slots
4 GB (1 x 4 GB) RDIMM
8 GB (2 x 4 GB) RDIMM
16 GB (4 x 4 GB) RDIMM
DIMM Slots Available
Standard (Entry Models)
Standard (Base Models)
Standard (Performance /
Energy Star Models)
Maximum (RDIMM)
384 GB (24 x 16 GB)
Maximum (LRDIMM)
768 GB (24 x 32 GB)
Maximum (UDIMM)
128 GB (16 x 8 GB)
NOTE: HP memory from previous generation servers are not qualified or warranted with this HP ProLiant
Server. HP SmartMemory is required to realize the memory performance improvements and enhanced
functionality listed in this document for Gen8. For additional information, please see the HP SmartMemory
QuickSpecs at: http://h18000.www1.hp.com/products/quickspecs/14225_na/14225_na.html
NOTE: LRDIMM, RDIMM and UDIMMs are all distinct memory technologies and cannot be mixed within a
server. The majority of ProLiant Gen8 servers support RDIMM, UDIMM and LRDIMM.
NOTE: If only one processor is installed, only 12 DIMM slots are available. When populating with two
processors 24 DIMM slots are available. For maximum speed on some memory options on 16 DIMM slots
may be populated.
NOTE: Depending on the memory configuration and processor model, the memory speed may run at
1600MHz, 1333MHz, or 1066MHz. Please see Memory Population Table or the Online Memory
Configuration Tool at: www.hp.com/go/ddr3memory-configurator.
DA - 14282 North America — Version 24 — April 18, 2014
Page 3
QuickSpecs
HP ProLiant DL160 Generation 8 (Gen8)
Standard Features
Network Controller
Expansion Slots #
1
2
HP 361i Integrated Dual Port Gigabit Server Adapter
Technology
Bus Width
Connector Width*
PCIe 3.0
X16
x16
Form Factor
Half length, full
height or Full length,
full height
PCIe 3.0
X8
x8
Low Profile
NOTE: *Indicates the number of physical electrical lanes running to the connector.
Notes
Internal only
NOTE: In order to access expansion slot #2 (the low profile internal only slot), expansion slot #1 may only be
populated with a half length, full height form factor card. If full length card is installed on the slot #1, low profile
internal only slot will be inaccessible.
HP Server ROM
HP ROM (Read Only Memory) is now digitally signed using HP's Corporate Signing Service. This signature is
verified before the flash process starts, reducing accidental programming and preventing malicious efforts
to corrupt system ROM.
HP ROM provides for essential initialization and validation of hardware components before control is
passed to the customer-installed operating system. The ROM also provides the capability of booting from
various fixed media (HDD, CD-ROM) and removable media (USB), to continue operation to the operating
system.
HP ROM performs very early configuration of the video controller, to allow monitoring of initialization
progress via an attached monitor. If configuration or hardware errors are discovered during this early
phase of hardware initialization, suitable messages are now displayed on the connected monitor.
Additionally, these configuration or hardware errors are logged to the Integrated Management Log (IML) to
assist in diagnosis.
HP's ProLiant ROM is used to configure the following:
Processor and chipset status registers
System memory, memory map, and memory initialization
System hardware configuration (Integrated PCI devices and optional PCIe cards).
Customer-specific BIOS configuration (using the HP ROM-Based Setup Utility (RBSU).
NOTE: For further information, please refer to HP's RBSU (ROM based setup utility) user guide:
http://www.hp.com/support/rbsu.
Storage Controller
One of the following
depending on Model
Entry Models
HP Dynamic Smart Array B120i controller
Base Models
HP Dynamic Smart Array B120i controller
Performance Models
HP Smart Array P420/1GB FBWC controller
NOTE: Available upgrades: 512MB FBWC for B120i, 2GB FBWC for P420 Controller/ 1GB FBWC controller
NOTE: HP Dynamic Smart Array B120i controller supports up to 3Gb/s speed in HP ProLiant DL160 Gen8.
HP Smart Array controller is required in PCIe slot to achieve 6Gb/s.
DA - 14282 North America — Version 24 — April 18, 2014
Page 4
QuickSpecs
HP ProLiant DL160 Generation 8 (Gen8)
Standard Features
Internal Storage Devices Diskette Drives
Optical Drives
Drive Bays
One of the following
depending on Model
Via USB only
Optional SATA 9.5mm DVD-ROM Optical Drive
Optional SATA 9.5mm DVD RW Optical Drive
Up to 4 Hot plug SAS/SATA 3.5" drives
Up to 8 Hot plug SAS/SATA 2.5" drives
Maximum Internal
Storage
One of the following
depending on Model
Hot Plug LFF SATA
Hot Plug LFF SATA SSD
Hot Plug LFF SAS
16.0TB
3.2TB
16.0TB
4 x 4TB
4 x 800GB
4 x 4TB
Hot Plug SFF SATA
Hot Plug SFF SATA SSD
Hot Plug SFF SAS
Hot Plug SAS SSD
Non-Hot Plug LFF SATA
Non-Hot Plug LFF SAS
8.0TB
6.4TB
9.6TB
6.4TB
12.0TB
2.4TB
8 x 1TB
8 x 800GB
8 x 1.2TB
8 x 800GB
4 x 3TB
4 x 600GB
Interfaces
Network RJ-45(Ethernet) 2 NIC ports, 1 dedicated iLO port
Serial
1 (Rear)
Pointing Device (Mouse)
0 (via USB only)
Graphics
2 VGA ports(1 rear, 1 front)
Keyboard
0 (via USB only)
USB 2.0 Ports
7 (two front, one internal, four rear)
NOTE: In order to use internal USB port, the internal USB Cable Gen8 Kit (P/N: 662961-B21) is required.
Please note that this is a Factory installable Only (FIO) option and cannot be bought standalone.
NOTE: Front Video Graphic Adapter Kit (PN 655915-B21) is required for enabling front VGA port.
Industry Standard
Compliance
ACPI 2.0 Compliant
PCIe 3.0 Compliant
PXE Support
WOL Support
Microsoft® Logo certifications
IPMI 2.0, SMASH CLP, DCMI 1.0 compliant
USB 2.0 Support
DA - 14282 North America — Version 24 — April 18, 2014
Page 5
QuickSpecs
HP ProLiant DL160 Generation 8 (Gen8)
Standard Features
Server Power Cords
One 6' Highline (IEC-IEC) power cord ships standard
NOTE: HP ProLiant DL servers no longer ship standard with a 12-foot NEMA 5-15P to C13 power cords that
allow connection to 110V US wall outlets in a home or office. HP ProLiant DL servers are primarily
connected to PDU's in data center racks and now ship standard with only a PDU 6-foot C-14 to C13 power
cord (142258-001). If a user wishes to power a ProLiant DL server using a110V receptacle (NEMA-15), the
12-foot NEMA 5-15 to C13 power cord.
If customers require a power cord, they can check the power cord matrix for the appropriate cord. Please
see the following power cord matrix: http://www.hp.com/go/powercordmatrix.
Power Specifications
To review typical system power ratings, use the HP Power Advisor tool available at URL:
www.hp.com/go/proliant-energy-efficient or www.hp.com/go/hppoweradvisor.
NOTE: Power Specification and Technical Content for supported power supplies can be found at:
http://h18000.www1.hp.com/products/quickspecs/14209_na/14209_na.html
Common Slot Power
Supplies
HP's Common Slot (CS) power supplies allow for commonality of power supplies across a wide range of
ProLiant and Integrity servers, as well as HP Storage solutions, and are designed to provide the highest
power supply efficiency without degrading system performance. HP CS power supplies are tested by the
Electric Power Research Institute (EPRI) and certified through the ECOS 80 Plus power supply program. HP
CS power supply options provide efficiency ratings of up to 94% and are available in three power output
options - 460W, 750W and 1200W - allowing the customer to "right-size" a power supply for their specific
server configuration. All HP Common Slot power sources are UL, CE Mark Compliant, hot-plug and support
redundant configurations.
HP CS Platinum Plus power supplies are required when enabling HP's Intelligent Power Discovery (IPD)
solution. IPD is the first technology to create an automated, energy-aware network between IT systems
and facilities. This allows your company to reclaim millions of dollars in wasted power capacity and
downtime costs across data centers. For more information on HP's IPD solution, go to
www.hp.com/go/ipd.
NOTE: It is highly recommended that you use the HP Power Advisor in defining the "Right-Size" power
supply for your needs. HP Power Advisor can be accessed at: www.hp.com/go/hppoweradvisor.
NOTE: The 80 PLUS program is a unique forum that unites electric utilities, the computer industry, and
consumers in an effort to bring energy efficient technology solutions to the marketplace. 80 Plus
independently tests power supply efficiency and publicly posts the results on 80Plus.org.
NOTE: Common Slot power supplies require a new power backplane kit (p/n: 662959-B21) for installation.
The Common Slot power supply and power backplane kits must be factory installed - neither should be
bought as a standalone option for HP ProLiant DL160 Gen8.
NOTE: 10GbE FlexibleLOM mandatorily need common slot power supply and are not supported with 500W
multi-output power supply. These FlexibleLOM options require Aux power connector that comes with the
common slot power supply. Please see the options section for specific details.
NOTE: Since DL160 Gen8 only has only one power supply slot, above mentioned power supplies will not be
Hot Plug in case of DL160 Gen8.
NOTE: Power Specification and Technical Content for supported power supplies can be found at:
http://h18000.www1.hp.com/products/quickspecs/14209_na/14209_na.html
DA - 14282 North America — Version 24 — April 18, 2014
Page 6
QuickSpecs
HP ProLiant DL160 Generation 8 (Gen8)
Standard Features
System Fans
One of the following
depending on Model
5 non-hot plug redundant fans ship standard in 1P models
7 non-hot plug redundant fans ship standard in 2P models
NOTE: The processor option kit contains two additional fan modules when upgrading from one processor
to two processor models.
Required Cabling
For required cabling information, refer to the Web site at: www.hp.com/servers/dl160 Gen8
Operating Systems and
Virtualization Software
Support for ProLiant
Servers
Microsoft Windows Server
Oracle Solaris
Red Hat Enterprise Linux (RHEL)
SUSE Linux Enterprise Server (SLES)
VMware
NOTE: For more information on HP's Certified and Supported ProLiant Servers for OS and Virtualization
Software and latest listing of software drivers available for your server, please visit our Support Matrix at:
http://www.hp.com/go/ossupport and our driver download page
http://www.hp.com/support/DL160cGen8.
Graphics
Integrated Matrox G200 video standard
1280 x 1024 (32 bpp)
1920 x 1200 (16 bpp)
HP iLO 4 On System Management Memory
16 MB Flash
256 MB DDR 3 with ECC (112 MB after ECC and video)
Form Factor
One of the following
depending on Model
Rack (1U), (1.75 in/4.45 cm)
8 SFF Models
1.7" (43.2mm) Height x 17.1" (434.6mm) Width x 27.5" (699mm) Length
4 LFF Models
1.7" (43.18mm) Height x 17.11" (434.6mm) Width x 29.5" (750mm) Length
On System Management
HP iLO Management
Engine
HP iLO Management Engine is a complete set of embedded management
features supporting the complete lifecycle of the server, from initial
deployment, through ongoing management, to service alerting and remote
support. HP iLO Management Engine comes standard on all HP ProLiant Gen8
Servers. HP iLO Management Engine portfolio includes:
HP iLO: The HP iLO management processor is the core foundation for
HP iLO Management Engine. HP iLO for HP ProLiant servers simplify
server setup, engage health monitoring and power and thermal control,
and promote remote administration for HP ProLiant ML, DL, BL and SL
servers. Furthermore with the new HP iLO is the ability to access,
DA - 14282 North America — Version 24 — April 18, 2014
Page 7
QuickSpecs
HP ProLiant DL160 Generation 8 (Gen8)
Standard Features
deploy, and manage your server anytime from anywhere with your
Smartphone device.
HP Agentless Management: With HP iLO Management Engine in every
HP ProLiant Gen8 server, the base hardware monitoring and alerting
capability is built into the system (running on the HP iLO chipset) and
starts working the moment that a power cord and an Ethernet cable is
connected to the server.
HP Active Health System: HP Active Health System is an essential
component of the HP iLO Management Engine. It provides: Diagnostics
tools/scanners wrapped into one; Always on, continuous monitoring for
increased stability and shorter downtimes; Rich configuration history;
Health and service alerts; Easy export and upload to Service and
Support.
HP Active Health System: HP Active Health System is an essential
component of the HP iLO Management Engine. It provides customers
with: Diagnostics tools/scanners wrapped into one; Always on,
continuous monitoring for increased stability and shorter downtimes;
Rich configuration history; Health and service alerts; Easy export and
upload to Service and Support.
HP Intelligent Provisioning: HP Intelligent Provisioning includes
everything you need for painless system setup and deployment. All
your HP Gen8 ProLiant servers and Gen8 ProLiant server blades are
ready to set-up right out-of-the box. The firmware, drivers, and tools
that you need to quickly get your systems online are embedded on a
NAND flash chip on the server motherboard- no more SmartStart CDs or
firmware DVDs needed. Intelligent Provisioning is agentless for
improved performance, but you still have the ability to run agents if
needed.
To start Intelligent Provisioning:
Press the F10 key during the ProLiant Gen8 server boot
process (also known as power on self test or POST).
Please go to the Intelligent Provisioning website at
www.hp.com/go/intelligentprovisioning for additional
information and to view usage videos.
Use the Service Pack for ProLiant (SPP) at
www.hp.com/go/spp to get firmware and software
updates.
NOTE: For more information, visit: http://www.hp.com/go/ilo
DA - 14282 North America — Version 24 — April 18, 2014
Page 8
QuickSpecs
HP ProLiant DL160 Generation 8 (Gen8)
Standard Features
HP Insight management
software
HP Service Pack for
ProLiant (SPP)
HP Service Pack for ProLiant (SPP) and HP Smart Update Manager (HP SUM)
version 5 provide a new, comprehensive approach to firmware and system
software maintenance. Together they provide better operating stability and
ensure maximum uptime. The SPP will be updated at a predictable cadence,
typically coinciding with new HP server hardware launches. By enabling all
firmware to be updated online and integrating firmware and system software
updates in one operation HP SUM and the SPP offer faster updates of
individual servers and dramatically faster updates of entire BladeSystem
enclosures. Further improving system uptime and stability is the fact that HP
provides 12 months of support on each Service Pack for ProLiant.
The user experience around HP SUM and the SPP has been improved in several
ways, starting with the web download. A single web page provides access to a
single download containing both the latest version of HP SUM version 5 and
the latest SPP. Optional smaller subsets with only specific types of servers or
specific operating systems are offered to save on download time. The HP SUM
application has been re-written to provide a more straightforward, intuitive
user interface that guides the user through the steps of discovery, analyses
and update, providing comprehensive information on available updates,
criticality and interdependencies. This information is also available in reports.
By providing the option of multiple local or shared repositories which can be
easily updated from hp.com, HP SUM provides the tools to optimize stability
and consistency throughout the company. While HP SUM and the SPP will
recommend the combinations of firmware and system software that HP has
found to be the best practice, the application gives customers the flexibility to
set their own specific baseline.
The Service Pack for ProLiant has been rigorously tested with specific
attention for interaction between firmware, drivers and agents both within the
server as well as in interaction with the BladeSystem enclosure components
(Onboard Administrator and Virtual Connect). This testing ensures the highest
quality as well as providing the input for HP SUM to deploy updates taking into
account all interdepencies, when determining the correct updates and order of
update deployment.
NOTE: The Service Pack for ProLiant (which includes HP SUM 5) can be
downloaded from www.hp.com/go/spp/download. More information can be
found: www.hp.com/go/spp and http://www.hp.com/go/hpsum
Security
Power-on password
Setup password
Diskette boot control
Secure Sockets Layer (SSL)
Secure Shell (SSH)
DA - 14282 North America — Version 24 — April 18, 2014
Page 9
QuickSpecs
HP ProLiant DL160 Generation 8 (Gen8)
Standard Features
Warranty
This product is covered by a global limited warranty and supported by HP Services and a worldwide
network of HP Authorized Channel Partners. Hardware diagnostic support and parts replacement is
available for three years from date of purchase. Support for software and initial setup is available for 90
days from date of purchase. Enhancements to warranty services are available through HP Care Pack
services or customized service agreements. Hard drives have either a one year or three year warranty;
refer to the specific hard drive QuickSpecs for details.
NOTE: Server Warranty includes 3 year Next Day Parts replacement, 0-Years Labor, 0-Years Onsite
support. Additional information regarding worldwide limited warranty and technical support is available
at: http://h18004.www1.hp.com/products/servers/platforms/warranty/index.html.
DA - 14282 North America — Version 24 — April 18, 2014
Page 10
QuickSpecs
HP ProLiant DL160 Generation 8 (Gen8)
Optional Features
HP Insight management
software
HP Insight Control
HP Insight Control, a product option, delivers essential infrastructure
management that can help save time and money by making it easy to deploy,
migrate, monitor, remote control, and optimize your IT infrastructure through
a single, simple management console. For more information, visit :
www.hp.com/go/insightcontrol.
HP Insight Control includes one year of 24 x 7 HP Software Technical Support
and Update Service ensuring rapid access to HP support staff and proactive
delivery of software updates. For more information about this service, please
visit: http://www.hp.com/services/insight.
HP Matrix Operating
Environment
NOTE: HP Insight Control 7.2 introduces Insight Control server provisioning, a
new capability ideal for multi-server OS and firmware provisioning to ProLiant
and BladeSystem servers. Insight Control server provisioning is included and
licensed as part of HP Insight Control. A media kit, "HP Insight Control server
provisioning USB media kit" (# BD883A), including a USB, is available for
customers who require a physical copy of the media loaded with Insight
Control server provisioning software. Please note that this media kit is
separate and in addition to the "HP Insight Management DVD media kit"
(#C6N31A).
The HP Matrix Operating Environment (Matrix OE) for ProLiant and Integrity
servers is an integrated command center that helps you instantly adjust to
dynamic business demands. This advanced infrastructure management
software lets you reduce the cost of common data center tasks by up to 40
percent while keeping pace with your changing business.
The HP Matrix OE includes the automated provisioning, optimization, and
recovery management capabilities for HP CloudSystem Matrix, the ideal
platform for private cloud and Infrastructure as a Service (IaaS).
NOTE: For more information, visit: http://www.hp.com/go/matrixoe
HP iLO Scale-Out
HP iLO Advanced
The HP iLO Scale-Out license ideal for web/hosting/cloud service providers
and High Performance Computing environments. This license is a specific
subset of iLO Advanced functionality, provides fast remote access through
Text Console via SSH, lower operational cost with Dynamic power capping, and
faster time to resolution through Email-based Alerting and proactive
notifications. With this newly designed HP iLO Scale-Out HPC customers now
have a server management package solely design and priced for their massive
data environments. HP iLO Scale-Out is available on all HP ProLiant Gen8 SL
and BL and DL 160 servers. For more information, see:
http://www.hp.com/go/iLO/scale-out
HP Integrated Lights-Out Advanced License a product option, providing smart
remote server management without compromise. iLO Advanced unlocks the
full set of remote administration functionality for all HP ProLiant servers by
activating the full Virtual Keyboard Video and Mouse remote console, multiuser collaboration, console record and replay, GUI-based and scripted virtual
media and virtual folders, and enhanced security and power management
functionality. For more information, see: http://www.hp.com/go/iloadvanced
DA - 14282 North America — Version 24 — April 18, 2014
Page 11
QuickSpecs
HP ProLiant DL160 Generation 8 (Gen8)
Optional Features
HP OneView
The HP OneView architecture combines server, storage, and networking with control of datacenter
environmentals into a single, integrated management platform. Architected to deliver lifecycle
management for the complete Converged Infrastructure, it facilitates collaboration, removes friction,
collapses cycle times, eliminates error-prone work, and accelerates time to value. HP OneView v1.0
combines management of servers and virtual connect with open integration to automate and customize
existing tools and processes. With OneView, you'll work smarter-with greater visibility and control-and
fully capitalize on the benefits of a Converged Infrastructure.
For more information on HP OneView management, see: http://www.hp.com/go/oneview.
High Performance
Clusters
HP Cluster Platforms
HP HPC Interconnects
HP Insight Cluster
Management Utility
Storage Software
HP Cluster Platforms are specifically engineered, factory-integrated largescale ProLiant clusters optimized for High Performance Computing, with a
choice of servers, networks and software. Operating system options include
specially priced offerings for Red Hat Enterprise Linux and SUSE Linux
Enterprise Server, as well as Microsoft Windows HPC Server. A Cluster
Platform Configurator simplifies ordering. http://www.hp.com/go/clusters
High Performance Computing (HPC) interconnect technologies are available
for this server as part of the HP Cluster Platform portfolio. These high-speed
InfiniBand and Gigabit interconnects are fully supported by HP when
integrated within an HP cluster. Flexible, validated solutions can be defined
with the help of configuration tools.
http://www.hp.com/techservers/clusters/ucp/index.html
HP Insight Cluster Management Utility (CMU) is an HP-licensed and HPsupported suite of tools that are used for lifecycle management of hyperscale
clusters of Linux ProLiant systems. CMU includes software for the centralized
provisioning, management and monitoring of nodes. CMU makes the
administration of clusters user friendly, efficient, and effective.
http://www.hp.com/go/cmu
Whether you need to solve a specific data protection, archiving, or storage command and control
challenge, or deliver on strategic consolidation, compliance, or continuity initiatives, look no further than
HP storage software. Our storage software helps you reduce costs, simplify storage infrastructure,
protect vital assets and respond faster to business opportunities.
Storage software that gets the job done:
Data Protection and Recovery Software
Whether you're a large enterprise or a smaller business, HP data protection and recovery software
will cost-effectively protect you against disaster and ensure business continuity.
Data Archive and Migration Software
HP's storage software enables you to comply with data retention and retrieval requirements,
improve application performance, and reduce costs by efficiently migrating infrequently accessed
or less valuable data to lower cost storage.
Storage Resource Management Software (SRM)
HP's storage resource management software reduces operational costs and provides the command
and control foundation you need to efficiently manage and visualize your physical and virtual
environments.
Data Replication Software
HP offers array-based and host-based replication software for use in disaster recovery, testing,
DA - 14282 North America — Version 24 — April 18, 2014
Page 12
QuickSpecs
HP ProLiant DL160 Generation 8 (Gen8)
Optional Features
application development and reporting.
Storage Device Management Software
Maximize your investment in HP storage and networking with software that enables hardwarespecific configuration, performance tuning and connectivity management.
HP StoreVirtual VSA
With HP StoreVirtual VSA you can use the power of virtualization to turn a set of heterogeneous and
disconnected physical disk drives in your servers and storage devices into a single pool of logical
storage capacity.
NOTE: For more information available Storage Software including QuickSpecs, please see:
www.hp.com/go/storage/software.
HP Insight Online
HP Insight Online is a new addition to the HP Support Center for one stop, secure access to product and HP
support information personalized to your IT environment. Insight Online can automatically display devices
remotely monitored by HP Insight Remote Support. With Insight Online's easy navigation you can
efficiently track your IT support contracts and device status from anywhere and at anytime.
www.hp.com/go/insightonline
Factory Express Portfolio HP Factory Express offers configuration, customization, integration and deployment services for HP
for Servers and Storage servers and storage products. Customers can choose how their factory solutions are built, tested,
integrated, shipped and deployed.
Factory Express offers service packages for simple configuration, racking, installation, complex
configuration and design services as well as individual factory services, such as image loading, asset
tagging, and custom packaging. HP products supported through Factory Express include a wide array of
servers and storage: HP Integrity, HP ProLiant, HP ProLiant Server Blades, HP BladeSystem, HP 9000
servers as well as the MSAxxxx, VA7xxx, EVA, XP, rackable tape libraries and configurable network
switches.
For more information on Factory Express services for your specific server model please contact your sales
representative or go to: http://www.hp.com/go/factory-express.
HP Simple Configurator
SCE is a guided self service tool to help sales and non technical people provide customers with initial
configurations in 3 to 5 minutes. You may then send the configuration on for configuration help, or use in
your existing ordering processes. If you require "custom" rack configuration or configuration for products
not available in SCE, please contact HP's Customer Business Center or an Authorized Partner for
assistance. http://www.hp.com/products/configurator
DA - 14282 North America — Version 24 — April 18, 2014
Page 13
QuickSpecs
HP ProLiant DL160 Generation 8 (Gen8)
Service and Support
Service and Support
HP Technology Services for Industry Standard Servers and BladeSystem
Capitalizing on HP ProLiant server and HP BladeSystem capabilities requires a service partner who
understands your increasingly complex business technology environment. That's why it makes sense to
team up with the people who know HP infrastructure hardware and software best - the experienced
professionals at HP Services.
What HP ProLiant and BladeSystem Services can do for you
HP ProLiant and BladeSystem Services can help you design, deploy, test, integrate, support, and manage
IT and infrastructure solutions. This way, HP proposes services solutions that include more than just uplift
of base warranty. Foundation Care services portfolio consists of scalable, reactive support services for HP
industry-standard servers and software. If you are running business critical environments, HP offers
Proactive Care. These services help deliver high levels of application availability through proactive service
management and advanced technical response.
You can get the support you need by choosing from one of a number of service packaged solutions we
have designed to address wider set of customer support needs.
HP Technology Services meets business challenges with services offered in three support
recommendations - Optimized Care, Standard Care, and Basic Care - available for each product group.
Such support solutions enable customers to optimize technology operations, minimize risk and drive
better business outcomes with easy-to-buy, easy-to-use scalable support recommendations for servers,
storage, networking and software.
All three service recommendations include support services from the broader portfolio of Foundation Care
and Proactive Care services.
Optimized Care Package
Supports maintaining servers at optimum performance availability
HP ProLiant Server Hardware Installation
Provides for the basic hardware installation of HP branded servers, storage devices and networking
options to assist you in bringing your new hardware into operation in a timely and professional manner
http://h20195.www2.hp.com/V2/GetPDF.aspx/5981-9356EN.pdf
3-Year HP 24x7 4 hour Response, Proactive Care
Helps optimize your systems and delivers high levels of application availability through proactive service
management and advanced technical response. A skilled Technical Manager will own your query or issue
end to end until resolved, delivering a single point of contact for you.
Additional Services: Software OS (Microsoft, Linux (SUSE/Red Hat)) Installation and Start Up and Software
Support plus Microsoft or Linux education courses +30 Proactive Select Credits, Factory Express.
DA - 14282 North America — Version 24 — April 18, 2014
Page 14
QuickSpecs
HP ProLiant DL160 Generation 8 (Gen8)
Service and Support
Standard Care Package
Support recommendation that maintains high level of server availability
HP ProLiant Server Hardware Installation
Provides for the basic hardware installation of HP branded servers, storage devices and networking
options to assist you in bringing your new hardware into operation in a timely and professional manner.
http://h20195.www2.hp.com/V2/GetPDF.aspx/5981-9356EN.pdf
HP Foundation Care 24x7 Service
Provides problem resolution support across the stack of HW, firmware, and HP and 3rd party SW. In case
the issue is with 3rd party SW, HP does known issue resolution. If HP cannot solve the issue, it will contact
the third-party vendor and create a problem incident on your behalf.
http://h20195.www2.hp.com/V2/GetPDF.aspx/4AA3-8232ENW.pdf
Additional Services: Software support service with 24X7 availability with a 2 hour response, Training
courses on Microsoft, Linux (Red Hat and SUSE), VMware, and HP Insight Software, +60 Proactive Select
Credits, Factory Express.
http://www8.hp.com/us/en/business-services/it-ervices.html?compURI=1078865
Basic Care Package
Delivers minimum recommended support service level
HP ProLiant Server Hardware Installation
Provides for the basic hardware installation of HP branded servers, storage devices and networking
options to assist you in bringing your new hardware into operation in a timely and professional manner.
http://h20195.www2.hp.com/V2/GetPDF.aspx/5981-9356EN.pdf
3-Year HP 24x7 4 hour Response, Hardware Support Onsite Service
Provides you with rapid remote support and if required an HP authorized representative who will arrive on
site any time and day of the year to begin hardware maintenance service within 4 hours of the service
request being logged
http://h20195.www2.hp.com/V2/GetPDF.aspx/5982-6547EEE.pdf
Additional Services: Software OS (Microsoft, Linux (SUSE/Red Hat)) Installation and Start Up and Software
Support, Factory Express.
Insight Remote Support
Provides 24 X 7 remote monitoring, proactive notifications, and problem resolution. Learn more
http://www.hp.com/go/insightremotesupport
HP Support Center
Personalized online support portal with access to information, tools and experts to support HP business
products. Submit support cases online, chat with HP experts, access support resources or collaborate with
peers. Learn more http://www.hp.com/go/hpsc
HP's Support Center Mobile App* allows you to resolve issues yourself or quickly connect to an agent for
live support. Now, you can get access to personalized IT support anywhere, anytime.
HP Insight Remote Support and HP Support Center are available at no additional cost with a HP warranty,
HP Care Pack or HP contractual support agreement.
*HP' Support Center Mobile App is subject to local availability.
DA - 14282 North America — Version 24 — April 18, 2014
Page 15
QuickSpecs
HP ProLiant DL160 Generation 8 (Gen8)
Service and Support
Warranty / Service
Coverage
For ProLiant servers and storage systems, the services cover HP-branded hardware options qualified for
the server, purchased at the same time or afterward, internal to the enclosure, as well as external
monitors up to 22" and tower UPS products; these items will be covered at the same service level and for
the same coverage period as the server unless the maximum supported lifetime and/or the maximum
usage limitation has been exceeded. Coverage of the UPS battery is not included; standard warranty terms
and conditions apply.
The defective media retention service feature option applies only to Disk or eligible SSD/Flash Drives
replaced by HP due to malfunction. It does not apply to any exchange of Disk or SSD/Flash Drives that
have not failed. SSD/Flash Drives that are specified by HP as consumable parts and/or that have exceeded
maximum supported lifetime and/or the maximum usage limit as set forth in the manufacturer's operating
manual or the technical data sheet are not eligible for the defective media retention service feature option.
For more information
To learn more on HP ProLiant servers and HP BladeSystem servers, please contact your HP sales
representative or HP Authorized Channel Partner. Or visit: http://www.hp.com/services/proliant
DA - 14282 North America — Version 24 — April 18, 2014
Page 16
QuickSpecs
HP ProLiant DL160 Generation 8 (Gen8)
Pre-configured Models
NOTE: For the Standard Features shipped in the "Factory Integrated Models", please see the "Configuration Information - Factory
Integrated Models" section.
NOTE: Pre-configured models ship with the configurations below. Options can be selected from the Core or Additional options section
of this QuickSpecs.
NOTE: HP does not allow factory integration of options into pre-configured models. Any additional options purchased will be shipped
separately.
NOTE: If you desire a custom configuration please see "Configuration Information - Factory Integrated Models" section of this
QuickSpecs.
NOTE: All Pre-configured Models come populated with some hard drive blanks installed. Should the customer need additional hard
drive blanks, they can order more using either P/N 666987-B21: HP SFF Gen8 Hard Drive Blank Kit or P/N 666986-B21: HP LFF Gen8
Hard Drive Blank Kit.
NOTE: Not all models are available in all regions. Check with your local country HP offices for availability.
Entry Model
HP ProLiant DL160 Gen8 Processor(s)
E5-2603 1P 4GB-R SATA 4 Cache Memory
LFF 500W PS Entry Server
Memory
662082-001
(1) Intel® Xeon® E5-2603 (1.8GHz/4-core/10MB/6.4GT-s QPI/80W)
10MB (1 x 10MB) L3 cache
4GB (1 x 4GB DDR3-1333MHz RDIMMs)
NOTE: Total of 24 DIMM slots
Network Controller
HP 361i Integrated Dual Port Gigabit Server Adapter
Storage Controller
HP Dynamic Smart Array B120i controller
NOTE: Provides data transmission speeds up to 3Gb/s.
Hard Drive
None ship standard; includes 3 LFF hard drive blanks
Internal Storage
Up to 4 large form factor drives
Optical Drive
(1) (Optional: DVD-ROM, DVD-RW)
Power Supply
500W Platinum FIO Power Supply with Backplane (ships standard)
Fans
(5) Non hot plug redundant fans
Management
HP iLO Management Engine (standard)
Optional: HP iLO Scale-Out or HP Insight Control
1U
NOTE: Includes Rack Mounting Gen8 non-telescoping Friction Rail Kit which
does not allow for in rack serviceability. The HP 1U Gen8 Cable Management
Arm is not available when using Friction Rails. Caution: HP recommends that a
minimum of two people are required for all Rack Server installations. Please
refer to your installation instructions for proper tools and number of people to
use for any installation
Server Warranty includes 3 year Next Day Parts replacement, 0-Years Labor,
0-Years Onsite support (3-1-1 warranty in APJ)
Form Factor
Warranty
Base Model
HP ProLiant DL160 Gen8 Processor(s)
E5-2620 1P 8GB-R SATA 4
LFF 500W PS Base Server Cache Memory
662083-001
Memory
(1) Intel® Xeon® E5-2620 (2.0GHz/6-core/15MB/7.2GT-s QPI/95W, DDR31333, HT, Turbo2- 3/3/4/4/5/5) processor
15MB (1 x 15MB) L3 cache
8GB (2x4GB DDR3-1333MHz RDIMMs
NOTE: Total of 24 DIMM slots
DA - 14282 North America — Version 24 — April 18, 2014
Page 17
QuickSpecs
HP ProLiant DL160 Generation 8 (Gen8)
Pre-configured Models
Network Controller
HP 361i Integrated Dual Port Gigabit Server Adapter
Storage Controller
HP Dynamic Smart Array B120i controller
NOTE: Provides data transmission speeds up to 3Gb/s.
Hard Drive
None ship standard; includes 3 LFF hard drive blanks
Internal Storage
Up to 4 large form factor drives
Optical Drive
(1) (Optional: DVD-ROM, DVD-RW)
Power Supply
500W Platinum FIO Power Supply with Backplane (ships standard)
Fans
(5) Non hot plug redundant fans
Management
HP iLO Management Engine (standard)
Optional:HP iLO Scale-Out or HP Insight Control
1U
NOTE: Includes Rack Mounting Gen8 non-telescoping Friction Rail Kit which
does not allow for in rack serviceability. The HP 1U Gen8 Cable Management
Arm is not available when using Friction Rails. Caution: HP recommends that a
minimum of two people is required for all Rack Server installations. Please
refer to your installation instructions for proper tools and number of people to
use for any installation
Server Warranty includes 3 year Next Day Parts replacement, 0-Years Labor,
0-Years Onsite support (3-1-1 warranty in APJ)
Form Factor
Warranty
Energy Star- Performance Model
HP ProLiant DL160 Gen8 Processor(s)
E5-2640 2P 16GB-R P420
Hot Plug 8 SFF 500W PS
Cache Memory
Perf Server
Memory
662084-001
(2) Intel® Xeon® E5-2640 (2.5GHz/6-core/15MB/7.2GT-s QPI/95W, DDR31333, HT, Turbo2- 3/3/4/4/5/5) processor
15MB (1 x 15MB) L3 cache
16GB (4x 4GB DDR3-1333MHz RDIMMs)
NOTE: Total of 24 DIMM slots
Network Controller
HP 361i Integrated Dual Port Gigabit Server Adapter
Storage Controller
HP Smart Array P420/ 1G FBWC controller
Hard Drive
None ship standard; includes 7 SFF hard drive blanks
Internal Storage
Up to 8 small form factor drives
Optical Drive
(1) (Optional: DVD-ROM, DVD-RW)
Power Supply
500W Platinum FIO Power Supply with Backplane (ships standard)
Fans
(7) Non hot plug redundant fans
Management
HP iLO Management Engine (standard)
Optional: HP iLO Scale-Out or HP Insight Control
1U
NOTE: Includes Rack Mounting Gen8 non-telescoping Friction Rail Kit which
does not allow for in rack serviceability. The HP 1U Gen8 Cable Management
Arm is not available when using Friction Rails. Caution: HP recommends that a
minimum of two people are required for all Rack Server installations. Please
refer to your installation instructions for proper tools and number of people to
use for any installation
Form Factor
DA - 14282 North America — Version 24 — April 18, 2014
Page 18
QuickSpecs
HP ProLiant DL160 Generation 8 (Gen8)
Pre-configured Models
Warranty
Server Warranty includes 3 year Next Day Parts replacement, 0-Years Labor,
0-Years Onsite support (3-1-1 warranty in APJ)
DA - 14282 North America — Version 24 — April 18, 2014
Page 19
QuickSpecs
HP ProLiant DL160 Generation 8 (Gen8)
Configuration Information - Factory Integrated Models
NOTE: This section lists some of the steps required to configure a Factory Integrated Model. To ensure only valid configurations are
ordered, HP recommends the use of an HP approved configurator. Contact your local sales representative for information on
configurable product offerings and requirements.
NOTE: Configure-to-order (CTO) servers must start with a CTO Chassis.
NOTE: FIO indicates that this option is only available as a factory installable option.
NOTE: Rail kits and cable management solutions are optional in CTO. See "Step 3: Choose Additional Factory Integratable Options" for
details on ordering.
NOTE: The DL160 ships standard with the HP Dynamic Smart Array B120i Controller which provides support for up to 4 SATA drives
(data transmission speeds up to 3Gb/s). Customers requiring more than 4 drives or SAS support are required to choose a HP Smart
Array controller
NOTE: Power Supply not included - choose from Power Options section.
NOTE: All Factory Integrated Models will be populated with sufficient hard drive blanks based on the number of initial hard drives
ordered with the server
Step 1: Base Configuration (choose one of the following configurable models)
HP Models
HP ProLiant DL160 Gen8 SFF Configure-to-order Server
Factory Integrated Model ships with:
2 x HP Smart Socket Guides for fast processor installation
HP 361i Integrated Dual Port Gigabit Server Adapter
Drive cage: Eight small form factor
I/O Slots- Two std
(1) FH/FL x16 PCIe 3.0 or (1) FH/HL x16 PCIe3.0 and (1)low profile x8 PCIe 3.0
(1)FlexibleLOM slot for networking upgrade
(24) DIMM slots for DIMMs installation
HP Dynamic Smart Array B120i controller
(5) Non-hot plug redundant fans
(7) USB ports-4 rear, 2 front, 1 internal
HP iLO Management Engine (standard)
Rack (1U), (1.75 in / 4.45 cm)
Power supply not included- Please choose from the power supply option section in Step
2 below.
HP ProLiant DL160 Gen8 LFF Configure-to-order Server
Factory Integrated Model ships with:
2 x HP Smart Socket Guides for fast processor installation
HP 361i Integrated Dual Port Gigabit Server Adapter
Drive cage: Four large form factor
I/O Slots- Two std
(1) FH/FL x16 PCIe 3.0 or (1) FH/HL x16 PCIe3.0 and (1)low profile x8 PCIe 3.0
(1)FlexibleLOM slot for networking upgrade
(24) DIMM slots for DIMMs installation
HP Dynamic Smart Array B120i controller
(5) Non-hot plug redundant fans
(7) USB ports-4 rear, 2 front, 1 internal
HP iLO Management Engine (standard)
Rack (1U), (1.75 in / 4.45 cm)
Power supply not included- Please choose from the power supply option section in Step
2 below.
HP ProLiant DL160 Gen8 Non-hot Plug LFF Configure-to-order Server
DA - 14282 North America — Version 24 — April 18, 2014
666281-B21
666282-B21
685622-B21
Page 20
QuickSpecs
HP ProLiant DL160 Generation 8 (Gen8)
Configuration Information - Factory Integrated Models
Factory Integrated Model ships with:
2 x HP Smart Socket Guides for fast processor installation
HP 361i Integrated Dual Port Gigabit Server Adapter
Drive cage: Four large form factor
I/O Slots- Two std
(1) FH/FL x16 PCIe 3.0 or (1) FH/HL x16 PCIe3.0 and (1)low profile x8 PCIe 3.0
(1)FlexibleLOM slot for networking upgrade
(24) DIMM slots for DIMMs installation
HP Dynamic Smart Array B120i controller
(5) Non-hot plug redundant fans
(7) USB ports-4 rear, 2 front, 1 internal
HP iLO Management Engine (standard)
Rack (1U), (1.75 in / 4.45 cm)
Power supply not included- Please choose from the power supply option section in Step
2 below.
Step 2: Choose Required Options (only one of the following from each list unless otherwise
noted)
HP Processors
NOTE: If 2 processors are desired, select one xxxxxx-L21 and one xxxxxx-B21.
Eight-Core Processors
HP DL160 Gen8 Intel® Xeon® E5-2680 (2.7GHz/8-core/20MB/130W) FIO Processor Kit
HP DL160 Gen8 Intel® Xeon® E5-2670 (2.6GHz/8-core/20MB/115W) FIO Processor Kit
HP DL160 Gen8 Intel® Xeon® E5-2665 (2.4GHz/8-core/20MB/115W) FIO Processor Kit
HP DL160 Gen8 Intel® Xeon® E5-2660 (2.2GHz/8-core/20MB/95W) FIO Processor Kit
HP DL160 Gen8 Intel® Xeon® E5-2650 (2.0GHz/8-core/20MB/95W) FIO Processor Kit
HP DL160 Gen8 Intel® Xeon® E5-2650L (1.8GHz/8-core/20MB/70W) FIO Processor Kit
Six-Core Processors
662933-L21
662932-L21
662925-L21
662924-L21
662931-L21
668863-L21
HP DL160 Gen8 Intel® Xeon® E5-2667 (2.9GHz/6-core/15MB/130W) FIO Processor Kit
HP DL160 Gen8 Intel® Xeon® E5-2640 (2.5GHz/6-core/15MB/95W) FIO Processor Kit
HP DL160 Gen8 Intel® Xeon® E5-2630 (2.3GHz/6-core/15MB/95W) FIO Processor Kit
HP DL160 Gen8 Intel® Xeon® E5-2620 (2.0GHz/6-core/15MB/95W) FIO Processor Kit
HP DL160 Gen8 Intel® Xeon® E5-2630L (2.0GHz/6-core/15MB/60W) FIO Processor Kit
Quad-Core Processors
662927-L21
662930-L21
662929-L21
662928-L21
662921-L21
HP DL160 Gen8 Intel® Xeon® E5-2609 (2.4GHz/4-core/10MB/80W) FIO Processor Kit
HP DL160 Gen8 Intel® Xeon® E5-2603 (1.8GHz/4-core/10MB/80W) FIO Processor Kit
NOTE: Up to 2 processors supported. Energy Star - Performance Model and Energy Star
Certified configurations include two processors with 7 Non-hot Plug Redundant fans.
Not all options are energy star qualified.
NOTE: For the Intel® C600 Chipset E5-2600 Series, the letter preceding the model
number indicates the Product Line (E3, E5, E7); 2600x v#, 2 = number of CPUs in a Node,
6 is socket/segment designation, 00 = Processor SKU, x = L for low power SKUs and v#
(not yet designated) = version number.
662923-L21
662922-L21
DA - 14282 North America — Version 24 — April 18, 2014
Page 21
QuickSpecs
HP ProLiant DL160 Generation 8 (Gen8)
Configuration Information - Factory Integrated Models
HP Memory
NOTE: HP memory from previous generation servers are not qualified or warranted with
this HP ProLiant Server. HP SmartMemory is required to realize the memory
performance improvements and enhanced functionality listed in this document for
Gen8. For additional information, please see the HP SmartMemory QuickSpecs at:
http://h18000.www1.hp.com/products/quickspecs/14225_na/14225_na.html
NOTE: LRDIMM, RDIMM and UDIMMs are all distinct memory technologies and cannot be
mixed within a server. The majority of ProLiant Gen8 servers support RDIMM, UDIMM
and LRDIMM.
Registered DIMMs (RDIMMs)
HP 4GB (1x4GB) Single Rank x4 PC3L-10600R (DDR3-1333) Registered CAS-9 Low
Voltage Memory Kit
HP 4GB (1x4GB) Single Rank x4 PC3-12800R (DDR3-1600) Registered CAS-11 Memory
Kit
HP 8GB (1x8GB) Dual Rank x4 PC3L-10600R (DDR3-1333) Registered CAS-9 Low
Voltage Memory Kit
HP 8GB (1x8GB) Single Rank x4 PC3-12800R (DDR3-1600) Registered CAS-11 Memory
Kit
HP 8GB (1x8GB) Dual Rank x4 PC3-12800R (DDR3-1600) Registered CAS-11 Memory Kit
HP 16GB (1x16GB) Dual Rank x4 PC3L-10600R (DDR3-1333) Registered CAS-9 Low
Voltage Memory Kit
HP 16GB (1x16GB) Dual Rank x4 PC3-12800R (DDR3-1600) Registered CAS-11 Memory
Kit
Unbuffered with ECC DIMMs (UDIMMs)
647893-B21
HP 2GB (1x2GB) Single Rank x8 PC3-12800E (DDR3-1600) Unbuffered CAS-11 Memory
Kit
HP 2GB (1x2GB) Single Rank x8 PC3L-10600E (DDR3-1333) Unbuffered CAS-9 Low
Voltage Memory Kit
HP 4GB (1x4GB) Dual Rank x8 PC3-12800E (DDR3-1600) Unbuffered CAS-11 Memory
Kit
HP 4GB (1x4GB) Dual Rank x8 PC3L-10600E (DDR3-1333) Unbuffered CAS-9 Low
Voltage Memory Kit
HP 8GB (1x8GB) Dual Rank x8 PC3-12800E (DDR3-1600) Unbuffered CAS-11 Memory
Kit
HP 8GB (1x8GB) Dual Rank x8 PC3L-10600E (DDR3-1333) Unbuffered CAS-9 Low
Voltage Memory Kit
Load Reduction DIMMs (LRDIMMs)
669320-B21
HP 32GB (1x32GB) Quad Rank x4 PC3L-10600L (DDR3-1333) Load Reduced CAS-9 Low
Voltage Memory Kit
NOTE: All DDR3 memory option kits consist of one DIMM per kit. For detailed memory
configuration rules and guidelines, please use the Online DDR3 Memory Configuration
Tool: www.hp.com/go/ddr3memory-configurator.
NOTE: Depending on the memory configuration and processor model, 1600MHz and
1333MHz memory may operate at a lower speed. Please see the see the "Memory"
section later in this document and the Online Memory Configuration Tool for details at
www.hp.com/go/ddr3memory-configurator.
NOTE: For additional memory rules and guidelines, see the "Memory" section later in
647903-B21
DA - 14282 North America — Version 24 — April 18, 2014
647895-B21
647897-B21
647899-B21
690802-B21
647901-B21
672631-B21
647905-B21
669322-B21
647907-B21
669324-B21
647909-B21
Page 22
QuickSpecs
HP ProLiant DL160 Generation 8 (Gen8)
Configuration Information - Factory Integrated Models
this document.
NOTE: For more information on ProLiant Energy Efficient Features, see:
www.hp.com/go/proliant-energy-efficient.
NOTE: PC3L is a low voltage memory.
NOTE: Not all Intel E5 processor series support 1600MHz or 1333MHz speeds. Memory
speed is a function of the processor QPI speed.
HP Power Supplies
NOTE: Prior to making a power supply selection it is highly recommended that the HP
Power Advisor is run to determine the right size power supply for your server
configuration. The HP Power Advisor is located at: www.hp.com/go/hppoweradvisor.
NOTE: HP ProLiant DL160 Gen8 has only one power supply slot, above mentioned
power supplies will not be Hot Plug for DL160 Gen8.
HP 500W Platinum Factory Integrated Power Supply Kit with Backplane
NOTE: Since this power supply is not common slot it does not allow iPDU to obtain HP
Location Discovery Services information. iLO Advanced Pack is required for Discovery
Services in DL160 Gen8.
HP Common Slot Platinum Plus Power Supply Kits
NOTE: The following Power Supplies offer 94% Efficiency with support for Intelligent
Power Discovery.
NOTE: Common slot power supplies need an enablement kit(P/N: 662959-B21) in
DL160 Gen8.
HP 460W Common Slot Platinum Plus Hot Plug Power Supply Kit
NOTE: Requires Power Backplane kit (p/n: 662959-B21).
656365-B21
HP 750W Common Slot Platinum Plus Hot Plug Power Supply Kit
NOTE: Requires Power Backplane kit (p/n: 662959-B21).
656363-B21
656362-B21
HP Common Slot -48VDC Power Supplies
HP 750W Common Slot -48VDC Hot Plug Power Supply Kit
NOTE: Requires Power Backplane kit (p/n: 662959-B21).
636673-B21
NOTE: The HP 750W Common Slot -48VDC power supply does not ship with a power
cable. It has been designed with a terminal block connection allowing for custom design
of power cords by the user.
NOTE: Option Kits for AC power supplies include the power supply and one PDU IEC
cable.
NOTE: HP ProLiant servers ship with an IEC-IEC power cord used for rack mounting with
Power Distribution Units (PDUs). For a full list of optional HP power cords please go to
www.hp.com/products/powercords
NOTE: Power Specification and Technical Content for supported power supplies can be
found at:
http://h18000.www1.hp.com/products/quickspecs/14209_na/14209_na.html
Enablement Kit
HP DL160 Gen8 FIO Power Backplane Kit
NOTE: When configuring the HP ProLiant DL160 Gen8 with a Common Slot power
supply, the HP Power Backplane DL160 Gen8 FIO Kit (PN 662959-B21) must be used for
proper installation. The Common Slot power supply and power backplane kit for the
DL160 Gen8 must be factory installed and cannot be purchased as separate options.
DA - 14282 North America — Version 24 — April 18, 2014
662959-B21
Page 23
QuickSpecs
HP ProLiant DL160 Generation 8 (Gen8)
Configuration Information - Factory Integrated Models
NOTE: Common Slot power supply is mandatory with 10Gigabit FlexibleLOM.
NOTE: Power Specification and Technical Content for supported power supplies can be
found at:
http://h18000.www1.hp.com/products/quickspecs/14209_na/14209_na.html
Step 3: Choose Additional Factory Integratable Options
HP Insight Software
HP Insight Control including 1yr 24x7 Support ProLiant ML/DL/BL-bundle Single Server
FIO License
Converged Infrastructure HP OneView with iLO Advanced - Server hardware required on same purchase order
Management Software
HP OneView for ProLiant DL Server incl 3yr 24x7 Supp FIO Bundle Physical 1 Svr Lic
HP OneView incl 3yr 24x7 Supp Bundle 1 Svr E-LTU
C6N36A
E5Y43A
E5Y43AAE
HP Optical Drives
HP 9.5mm SATA DVD-ROM JackBlack Optical Drive
HP 9.5mm SATA DVD-RW JackBlack Optical Drive
652238-B21
652241-B21
HP USB and SD Options
HP Gen8 FIO Internal USB Kit
NOTE: Required to enable the internal USB port.
662961-B21
HP Rack Options
HP 1U FIO Friction Rail Kit
NOTE: Includes Rack Mounting Gen8 non-telescoping Friction Rail Kit which does not
allow for in rack serviceability. The HP 1U Gen8 Cable Management Arm is not available
when using Friction Rails. Caution: HP recommends that a minimum of two people is
required for all Rack Server installations. Please refer to your installation instructions
for proper tools and number of people to use for any installation.
NOTE: Additional Rack Options can be found in the "Additional Options" section of this
QuickSpecs.
663200-B21
Step 4: Choose Additional Options for Factory Integration
NOTE: For additional "Core Options" and "Additional Options", please refer to the "Options" section below.
DA - 14282 North America — Version 24 — April 18, 2014
Page 24
QuickSpecs
HP ProLiant DL160 Generation 8 (Gen8)
Core Options
NOTE: Some options may not be integrated at the factory. To ensure only valid configurations are ordered, HP recommends the use of
an HP approved configurator. Contact your local sales representative for additional information.
HP Unique Options
HP DL160 Gen8 VGA Power Cable Kit
662965-B21
NOTE: Required with NVIDIA Quadro 4000 graphic card.
HP DL360 Gen8 Front Video Adapter Kit
NOTE: Required to enable the front video port.
HP Processors
HP Memory
655915-B21
Eight-Core Processors
HP DL160 Gen8 Intel® Xeon® E5-2680 (2.7GHz/8-core/20MB/130W) Processor Kit
HP DL160 Gen8 Intel® Xeon® E5-2670 (2.6GHz/8-core/20MB/115W) Processor Kit
662933-B21
662932-B21
HP DL160 Gen8 Intel® Xeon® E5-2665 (2.4GHz/8-core/20MB/115W) Processor Kit
HP DL160 Gen8 Intel® Xeon® E5-2660 (2.2GHz/8-core/20MB/95W) Processor Kit
HP DL160 Gen8 Intel® Xeon® E5-2650 (2.0GHz/8-core/20MB/95W) Processor Kit
HP DL160 Gen8 Intel® Xeon® E5-2650L (1.8GHz/8-core/20MB/70W) Processor Kit
Six-Core Processors
662925-B21
662924-B21
662931-B21
668863-B21
HP DL160 Gen8 Intel® Xeon® E5-2667 (2.9GHz/6-core/15MB/130W) Processor Kit
HP DL160 Gen8 Intel® Xeon® E5-2640 (2.5GHz/6-core/15MB/95W) Processor Kit
HP DL160 Gen8 Intel® Xeon® E5-2630 (2.3GHz/6-core/15MB/95W) Processor Kit
HP DL160 Gen8 Intel® Xeon® E5-2620 (2.0GHz/6-core/15MB/95W) Processor Kit
HP DL160 Gen8 Intel® Xeon® E5-2630L (2.0GHz/6-core/15MB/60W) Processor Kit
Quad-Core Processors
662927-B21
662930-B21
662929-B21
662928-B21
662921-B21
HP DL160 Gen8 Intel® Xeon® E5-2609 (2.4GHz/4-core/10MB/80W) Processor Kit
HP DL160 Gen8 Intel® Xeon® E5-2603 (1.8GHz/4-core/10MB/80W) Processor Kit
NOTE: Up to 2 processors supported. Energy Star - High Performance Model and Energy
Star Certified configurations include two processors with 7 non- Hot Plug Redundant
fans.
NOTE: For the Intel® C600 Chipset E5-2600 Series, the letter preceding the model
number indicates the Product Line (E3, E5, E7); 2600x v#, 2 = number of CPUs in a Node,
6 is socket/segment designation, 00 = Processor SKU, x = L for low power SKUs and v#
(not yet designated) = version number.
662923-B21
662922-B21
NOTE: HP memory from previous generation servers are not qualified or warranted with
this HP ProLiant Server. HP SmartMemory is required to realize the memory
performance improvements and enhanced functionality listed in this document for
Gen8. For additional information, please see the HP SmartMemory QuickSpecs at:
http://h18000.www1.hp.com/products/quickspecs/14225_na/14225_na.html.
NOTE: LRDIMM, RDIMM and UDIMMs are all distinct memory technologies and cannot be
mixed within a server. The majority of ProLiant Gen8 servers support RDIMM, UDIMM
and LRDIMM.
Registered DIMMs (RDIMMs)
HP 4GB (1x4GB) Single Rank x4 PC3L-10600R (DDR3-1333) Registered CAS-9 Low
Voltage Memory Kit
DA - 14282 North America — Version 24 — April 18, 2014
647893-B21
Page 25
QuickSpecs
HP ProLiant DL160 Generation 8 (Gen8)
Core Options
HP 4GB (1x4GB) Single Rank x4 PC3-12800R (DDR3-1600) Registered CAS-11 Memory
Kit
HP 8GB (1x8GB) Dual Rank x4 PC3L-10600R (DDR3-1333) Registered CAS-9 Low
Voltage Memory Kit
HP 8GB (1x8GB) Single Rank x4 PC3-12800R (DDR3-1600) Registered CAS-11 Memory
Kit
HP 8GB (1x8GB) Dual Rank x4 PC3-12800R (DDR3-1600) Registered CAS-11 Memory Kit
HP 16GB (1x16GB) Dual Rank x4 PC3L-10600R (DDR3-1333) Registered CAS-9 Low
Voltage Memory Kit
HP 16GB (1x16GB) Dual Rank x4 PC3-12800R (DDR3-1600) Registered CAS-11 Memory
Kit
647895-B21
647897-B21
647899-B21
690802-B21
647901-B21
672631-B21
Unbuffered with ECC DIMMs (UDIMMs)
HP Optical Drives
HP 2GB (1x2GB) Single Rank x8 PC3-12800E (DDR3-1600) Unbuffered CAS-11 Memory
Kit
HP 2GB (1x2GB) Single Rank x8 PC3L-10600E (DDR3-1333) Unbuffered CAS-9 Low
Voltage Memory Kit
HP 4GB (1x4GB) Dual Rank x8 PC3-12800E (DDR3-1600) Unbuffered CAS-11 Memory
Kit
HP 4GB (1x4GB) Dual Rank x8 PC3L-10600E (DDR3-1333) Unbuffered CAS-9 Low
Voltage Memory Kit
HP 8GB (1x8GB) Dual Rank x8 PC3-12800E (DDR3-1600) Unbuffered CAS-11 Memory
Kit
HP 8GB (1x8GB) Dual Rank x8 PC3L-10600E (DDR3-1333) Unbuffered CAS-9 Low
Voltage Memory Kit
Load Reduction DIMMs (LRDIMMs)
669320-B21
HP 32GB (1x32GB) Quad Rank x4 PC3L-10600L (DDR3-1333) Load Reduced CAS-9 Low
Voltage Memory Kit
NOTE: All DDR3 memory option kits consist of one DIMM per kit. For detailed memory
configuration rules and guidelines, please use the Online DDR3 Memory Configuration
Tool: www.hp.com/go/ddr3memory-configurator.
NOTE: Depending on the memory configuration and processor model, 1600MHz and
1333MHz memory may operate at a lower speed. Please see the see the "Memory"
section later in this document and the Online Memory Configuration Tool for details at:
www.hp.com/go/ddr3memory-configurator.
NOTE: For additional memory rules and guidelines, see the "Memory" section later in
this document.
NOTE: For more information on ProLiant Energy Efficient Features, see:
www.hp.com/go/proliant-energy-efficient.
NOTE: PC3L is a low voltage memory.
NOTE: Not all Intel E5 processor series support 1600MHz or 1333MHz speeds. Memory
speed is a function of the processor QPI speed.
647903-B21
HP 9.5mm SATA DVD-ROM JackBlack Optical Drive
HP 9.5mm SATA DVD-RW JackBlack Optical Drive
652238-B21
652241-B21
DA - 14282 North America — Version 24 — April 18, 2014
647905-B21
669322-B21
647907-B21
669324-B21
647909-B21
Page 26
QuickSpecs
HP ProLiant DL160 Generation 8 (Gen8)
Core Options
HP Hard Drives
NOTE: HP ProLiant Gen8 Smart Storage solutions are equipped with entirely redesigned Small Form Factor (SFF 2.5 in) and Large Form Factor (LFF 3.5 in) hot plug
carriers for HP Qualified Hard Drives and Solid State Drives. These new carriers provide
status and activity indicators as well as caution indicators for "Do Not Remove".
NOTE: The components of a storage subsystem (e.g. the drive, the HBA/controller, and
the server backplane) should operate at the same data transfer rate or the system
bandwidth will be negotiated down to an acceptable level for all components.
NOTE: Hard drives have either a one year or three year warranty; refer to the specific
hard drive QuickSpecs for details.
SAS Hot Plug SmartDrive SFF (2.5-inch) Enterprise Drives
HP 1.2TB 6G SAS 10K rpm SFF (2.5-inch) SC Enterprise 3yr Warranty Hard Drive
HP 1.2TB 6G SAS 10K rpm SFF (2.5-inch) SC Dual Port Enterprise 3yr Warranty Hard
Drive
HP 900GB 6G SAS 10K rpm SFF (2.5-inch) SC Enterprise 3yr Warranty Hard Drive
HP 600GB 6G SAS 10K rpm SFF (2.5-inch) SC Enterprise 3yr Warranty Hard Drive
HP 450GB 6G SAS 10K rpm SFF (2.5-inch) SC Enterprise 3yr Warranty Hard Drive
HP 300GB 6G SAS 10K rpm SFF (2.5-inch) SC Enterprise 3yr Warranty Hard Drive
HP 300GB 6G SAS 15K rpm SFF (2.5-inch) SC Enterprise 3yr Warranty Hard Drive
HP 146GB 6G SAS 15K rpm SFF (2.5-inch) SC Enterprise 3yr Warranty Hard Drive
SAS Hot Plug SmartDrive SFF (2.5-inch) Midline Drives
697574-B21
718162-B21
HP 1TB 6G SAS 7.2K rpm SFF (2.5-inch) SC Midline 1yr Warranty Hard Drive
HP 500GB 6G SAS 7.2K rpm SFF (2.5-inch) SC Midline 1yr Warranty Hard Drive
SAS Hot Plug SmartDrive LFF (3.5-inch) Enterprise Drives
652749-B21
652745-B21
HP 600GB 6G SAS 15K rpm LFF (3.5-inch) SC Enterprise 3yr Warranty Hard Drive
HP 450GB 6G SAS 15K rpm LFF (3.5-inch) SC Enterprise 3yr Warranty Hard Drive
SAS Hot Plug SmartDrive LFF (3.5-inch) Midline Drives
652620-B21
652615-B21
HP 4TB 6G SAS 7.2K rpm LFF (3.5-inch) SC Midline 1yr Warranty Hard Drive
HP 3TB 6G SAS 7.2K rpm LFF (3.5-inch) SC Midline 1yr Warranty Hard Drive
HP 2TB 6G SAS 7.2K rpm LFF (3.5-inch) SC Midline 1yr Warranty Hard Drive
HP 1TB 6G SAS 7.2K rpm LFF (3.5-inch) SC Midline 1yr Warranty Hard Drive
NOTE: Please see the QuickSpecs for Technical Specifications and additional
information:
http://h18000.www1.hp.com/products/quickspecs/12244_na/12244_na.html
6G SATA Hot Plug with SmartDrive SFF (2.5-inch) Midline (MDL) Drives
695510-B21
652766-B21
652757-B21
652753-B21
HP 500GB 6G SATA 7.2K rpm SFF (2.5-inch) SC Midline 1yr Warranty Hard Drive
HP 1TB 6G SATA 7.2K rpm SFF (2.5-inch) SC Midline 1yr Warranty Hard Drive
6G SATA Hot Plug with SmartDrive LFF (3.5-inch) Midline (MDL) Drives
655708-B21
655710-B21
HP 4TB 6G SATA 7.2k rpm LFF (3.5-inch) SC Midline 1yr Warranty Hard Drive
HP 3TB 6G SATA 7.2K rpm LFF (3.5-inch) SC Midline 1yr Warranty Hard Drive
HP 2TB 6G SATA 7.2K rpm LFF (3.5-inch) SC Midline 1yr Warranty Hard Drive
HP 1TB 6G SATA 7.2K rpm LFF (3.5-inch) SC Midline 1yr Warranty Hard Drive
HP 500GB 6G SATA 7.2K rpm LFF (3.5-inch) SC Midline 1yr Warranty Hard Drive
693687-B21
628061-B21
658079-B21
657750-B21
658071-B21
DA - 14282 North America — Version 24 — April 18, 2014
Page 27
652589-B21
652583-B21
652572-B21
652564-B21
652611-B21
652605-B21
QuickSpecs
HP ProLiant DL160 Generation 8 (Gen8)
Core Options
NOTE: Please see QuickSpecs for Technical Specifications and additional information:
http://h18000.www1.hp.com/products/quickspecs/13021_na/13021_na.html
(Worldwide)
12G SAS High Endurance Hot Plug SFF (2.5-inch) Enterprise Performance Solid State
Drives
HP 800GB 12G SAS High Endurance SFF 2.5-in SC Enterprise Performance 3yr Wty Solid
State Drive
NOTE: This drive supports Gen8 servers only.
741159-B21
HP 400GB 12G SAS High Endurance SFF 2.5-in SC Enterprise Performance 3yr Wty Solid
State Drive
NOTE: This drive supports Gen8 servers only.
741155-B21
HP 200GB 12G SAS High Endurance SFF 2.5-in SC Enterprise Performance 3yr Wty Solid
State Drive
NOTE: This drive supports Gen8 servers only.
741151-B21
12G SAS Mainstream Endurance Hot Plug SFF (2.5-inch) Enterprise Mainstream Solid
State Drives
HP 800GB 12G SAS Mainstream Endurance SFF 2.5-in SC Enterprise Mainstream 3yr Wty
Solid State Drive
NOTE: This drive supports Gen8 servers only.
741146-B21
HP 400GB 12G SAS Mainstream Endurance SFF 2.5-in SC Enterprise Mainstream 3yr Wty
Solid State Drive
NOTE: This drive supports Gen8 servers only.
741142-B21
HP 200GB 12G SAS Mainstream Endurance SFF 2.5-in SC Enterprise Mainstream 3yr Wty
Solid State Drive
NOTE: This drive supports Gen8 servers only.
741138-B21
6G SAS ME Hot Plug SFF (2.5-inch) Enterprise Mainstream Solid State Drives
HP 800GB 6G SAS Mainstream Endurance SFF 2.5-in SC Enterprise Mainstream 3yr Wty
Solid State Drive
HP 400GB 6G SAS Mainstream Endurance SFF 2.5-in SC Enterprise Mainstream 3yr Wty
Solid State Drive
HP 200GB 6G SAS Mainstream Endurance SFF 2.5-in SC Enterprise Mainstream 3yr Wty
Solid State Drive
6G SAS SLC Hot Plug SFF (2.5-inch) Enterprise Performance Solid State Drives
690829-B21
HP 200GB 6G SAS SLC SFF (2.5-inch) SC Enterprise Performance 3yr Warranty Solid
State Drive
HP 400GB 6G SAS SLC SFF (2.5-inch) SC Enterprise Performance 3yr Warranty Solid
State Drive
6G SATA Value Endurance Hot Plug SFF (2.5-inch) Enterprise Boot Solid State Drives
653078-B21
690827-B21
690825-B21
653082-B21
NOTE: These drives support Gen8 servers only.
HP 80GB 6G SATA Value Endurance SFF 2.5-in SC Enterprise Boot 3yr Wty Solid State
Drive
6G SATA Value Endurance Hot Plug LFF (3.5-inch) Enterprise Value Solid State Drives
734360-B21
NOTE: These drives support Gen8 servers only.
HP 800GB 6G SATA Value Endurance LFF 3.5-in SC Enterprise Value 3yr Wty Solid State
Drive
DA - 14282 North America — Version 24 — April 18, 2014
718189-B21
Page 28
QuickSpecs
HP ProLiant DL160 Generation 8 (Gen8)
Core Options
HP 480GB 6G SATA Value Endurance LFF 3.5-in SC Enterprise Value 3yr Wty Solid State
Drive
HP 300GB 6G SATA Value Endurance LFF 3.5-in SC Enterprise Value 3yr Wty Solid State
Drive
HP 600GB 6G SATA Value Endurance LFF 3.5-in SC Enterprise Value 3yr Wty Solid State
Drive
HP 240GB 6G SATA Value Endurance LFF 3.5-in SC Enterprise Value 3yr Wty Solid State
Drive
6G SATA ME Hot Plug SFF (2.5-inch) Enterprise Mainstream Solid State Drives
718183-B21
HP 800GB 6G SATA Mainstream Endurance SFF 2.5-in SC Enterprise Mainstream 3yr Wty
Solid State Drive
HP 400GB 6G SATA Mainstream Endurance SFF 2.5-in SC Enterprise Mainstream 3yr Wty
Solid State Drive
HP 200GB 6G SATA Mainstream Endurance SFF 2.5-in SC Enterprise Mainstream 3yr Wty
Solid State Drive
HP 100GB 6G SATA Mainstream Endurance SFF 2.5-in SC Enterprise Mainstream 3yr Wty
Solid State Drive
6G SATA Value Endurance Hot Plug LFF (3.5-inch) Enterprise Boot Solid State Drives
691868-B21
739890-B21
739900-B21
718177-B21
691866-B21
691864-B21
691862-B21
NOTE: These drives support Gen8 servers only.
HP 80GB 6G SATA Value Endurance LFF 3.5-in SC Enterprise Boot 3yr Wty Solid State
Drive
HP 120GB 6G SATA Value Endurance LFF 3.5-in SC Enterprise Boot 3yr Wty Solid State
Drive
HP 300GB 6G SATA Value Endurance SFF 2.5-in SC Enterprise Value 3yr Wty Solid State
Drive
HP 600GB 6G SATA Value Endurance SFF 2.5-in SC Enterprise Value 3yr Wty Solid State
Drive
6G SATA Value Endurance Hot Plug SFF (2.5-inch) Enterprise Value Solid State
Drives
734362-B21
718171-B21
739888-B21
739898-B21
NOTE: These drives support Gen8 servers only.
HP 800GB 6G SATA Value Endurance SFF 2.5-in SC Enterprise Value 3yr Wty Solid State
Drive
HP 480GB 6G SATA Value Endurance SFF 2.5-in SC Enterprise Value 3yr Wty Solid State
Drive
HP 240GB 6G SATA Value Endurance SFF 2.5-in SC Enterprise Value 3yr Wty Solid State
Drive
6G SATA ME Hot Plug LFF (3.5-inch) Enterprise Mainstream Solid State Drives
717973-B21
HP 800GB 6G SATA Mainstream Endurance LFF 3.5-in SC Enterprise Mainstream 3yr Wty
Solid State Drive
HP 400GB 6G SATA Mainstream Endurance LFF 3.5-in SC Enterprise Mainstream 3yr Wty
Solid State Drive
HP 200GB 6G SATA Mainstream Endurance LFF 3.5-in SC Enterprise Mainstream 3yr Wty
Solid State Drive
691860-B21
DA - 14282 North America — Version 24 — April 18, 2014
717971-B21
717969-B21
691856-B21
691854-B21
Page 29
QuickSpecs
HP ProLiant DL160 Generation 8 (Gen8)
Core Options
HP Networking
HP 100GB 6G SATA Mainstream Endurance LFF 3.5-in SC Enterprise Mainstream 3yr Wty
Solid State Drive
6G SATA Non-hot Plug LFF (3.5-inch) Midline (MDL) Drives
691852-B21
HP 3TB 6G SATA 7.2K rpm LFF (3.5-inch) Non-hot plug Midline 1yr Warranty Hard Drive
HP 2TB 6G SATA 7.2K rpm LFF (3.5-inch) Non-hot plug Midline 1yr Warranty Hard Drive
HP 1TB 6G SATA 7.2K rpm LFF (3.5-inch) Non-hot plug Midline 1yr Warranty Hard Drive
HP 500GB 6G SATA 7.2K rpm LFF (3.5-inch) Non-hot plug Midline 1yr Warranty Hard
Drive
SAS Non-Hot Plug LFF (3.5-inch) Enterprise (ENT) Drives
628065-B21
659339-B21
659337-B21
659341-B21
HP 600GB 6G SAS 15K rpm LFF (3.5-inch) Non-hot Plug Dual Port Enterprise 3yr
Warranty Hard Drive
516830-B21
HP 450GB 6G SAS 15K rpm LFF (3.5-inch) Non-hot Plug Dual Port Enterprise 3yr
Warranty Hard Drive
NOTE: Please see the QuickSpecs for Technical Specifications and additional
information:
http://h18000.www1.hp.com/products/quickspecs/14038_na/14038_na.html
(Worldwide)
Hard Drive Kits
516826-B21
HP SFF Gen8 Hard Drive Blank Kit
HP LFF Gen8 Hard Drive Blank Kit
666987-B21
666986-B21
Gigabit Ethernet Adapters
HP NC112T PCI Express Gigabit Server Adapter
HP Ethernet 1Gb 4-port 331T Adapter
HP Ethernet 1Gb 2-port 332T Adapter
HP Ethernet 1Gb 2-port 361T Adapter
HP NC365T 4-port Ethernet Server Adapter
10 Gigabit Ethernet Adapters
NOTE: No more than two10GbE I/O devices are supported in a single ProLiant server.
NOTE: A minimum of two Gigabytes (2 GB) of server memory is required per each
adapter.
NOTE: Direct Attach Cable (DAC) for copper environments or fiber transceivers and
cables for fiber-optic environments must be purchased separately.
HP NC523SFP 10Gb 2-port Server Adapter
HP NC552SFP 10Gb 2-port Ethernet Server Adapter
HP Ethernet 10Gb 2-port 530SFP Adapter
HP Ethernet 10Gb 2-port 530SFP Adapter
HP Ethernet 10Gb 2-port 530T Adapter
HP Ethernet 10Gb 2-port 560SFP+ Adapter
HP Ethernet 10Gb 2-port 561T Adapter
FlexibleLOM Adapters
503746-B21
647594-B21
615732-B21
652497-B21
593722-B21
HP Ethernet 1Gb 4-port 331FLR Adapter
629135-B21
DA - 14282 North America — Version 24 — April 18, 2014
593717-B21
614203-B21
652503-B21
652503-B21
656596-B21
665249-B21
716591-B21
Page 30
QuickSpecs
HP ProLiant DL160 Generation 8 (Gen8)
Core Options
HP Ethernet 1Gb 4-port 366FLR Adapter
HP Ethernet 10Gb 2-port 530FLR-SFP+ Adapter
HP FlexFabric 10Gb 2-port 534FLR-SFP+ Adapter
HP FlexFabric 10Gb 2-port 526FLR-SFP+ Adapter
HP Ethernet 10Gb 2-port 561FLR-T Adapter
HP FlexFabric 10Gb 2-port 533FLR-T Adapter
HP FlexFabric 10Gb 2-port 554FLR-SFP+ Adapter
HP Ethernet 10Gb 2-port 560FLR-SFP+ Adapter
NOTE: HP ProLiant DL160 Gen8 has a dedicated slot for FlexibleLOM. PCIe slots need
not be consumed for installing FlexibleLOM.
NOTE: Please note that common slot power supply is mandatorily required with 10Gb
FlexibleLOM and 10Gb Ethernet adapters. Common slot power supplies are factory
installable only and cannot be bought as standalone option kit in HP ProLiant DL160
Gen8.
NOTE: Please see the QuickSpecs for Technical Specifications and additional
information: www.hp.com/go/ProLiantNICs.
665240-B21
647581-B21
700751-B21
629138-B21
700699-B21
700759-B21
629142-B21
665243-B21
HP Secure Encryption
HP Secure Encryption No Media E-LTU per Drive
HP Secure Encryption No Media Flexible License per Drive
NOTE: HP Secure Encryption is supported on the HP Smart Array P731m and the P230i
as an option. HP Secure Encryption licensing is based on the number of physical drives
requiring encryption.
NOTE: For more information about HP Secure Encryption, go to
www.hp.com/go/hpsecureencryption.
D8S85AAE
D8S84A
HP InfiniBand
HP InfiniBand 4X QDR ConnectX-2 PCIe G2 Dual Port HCA
HP InfiniBand FDR 2-port 545QSFP Adapter
HP Infiniband FDR/Ethernet 10Gb/40Gb 2-port 544QSFP Adapter
HP Infiniband FDR/Ethernet 10Gb/40Gb 2-port 544FLR-QSFP Adapter
HP Infiniband QDR/Ethernet 10Gb 2-port 544FLR-QSFP Adapter
QLogic InfiniBand 4X QDR PCI-E G2 Dual Port HCA
NOTE: Please see the QuickSpecs for additional information:
http://h18000.www1.hp.com/products/quickspecs/13078_na/13078_na.html
DA - 14282 North America — Version 24 — April 18, 2014
592520-B21
702211-B21
649281-B21
649282-B21
649283-B21
583211-B21
Page 31
QuickSpecs
HP ProLiant DL160 Generation 8 (Gen8)
Core Options
HP Power Supplies
HP Graphics Options
NOTE: Prior to making a power supply selection it is highly recommended that the HP
Power Advisor is run to determine the right size power supply for your server
configuration. The HP Power Advisor is located at: www.hp.com/go/hppoweradvisor.
NOTE: Field upgrade is possible only from 460W Common Slot Power Supply to either
of the below mentioned Common Slot Power Supplies. The 500W multi output power
supplies are not field upgradable.
HP Common Slot Platinum Plus Power Supply Kits
NOTE: The following AC Power Supplies offer 94% Efficiency with support for
Intelligent Power Discovery.
HP 750W Common Slot Platinum Plus Hot Plug Power Supply Kit
HP Common Slot -48VDC Power Supplies
NOTE: The following Power Supplies offer 92% Efficiency
656363-B21
HP 750W Common Slot -48VDC Hot Plug Power Supply Kit
NOTE: The HP 750W Common Slot -48VDC power supply does not ship with a power
cable. It has been designed with a terminal block connection allowing for custom design
of power cords by the user.
NOTE: Option Kits for AC power supplies include the power supply and one PDU IEC
cable.
NOTE: HP ProLiant servers ship with an IEC-IEC power cord used for rack mounting with
Power Distribution Units (PDUs). For a full list of optional HP power cords please go to
www.hp.com/products/powercords
NOTE: Power Specification and Technical Content for supported power supplies can be
found at:
http://h18000.www1.hp.com/products/quickspecs/14209_na/14209_na.html
636673-B21
HP DL160 Gen8 VGA Power Cable Kit
NOTE: Required with NVIDIA Quadro 4000 graphic card.
662965-B21
HP DL360 Gen8 Front Video Adapter Kit
NOTE: Required to enable the front video port.
655915-B21
DA - 14282 North America — Version 24 — April 18, 2014
Page 32
QuickSpecs
HP ProLiant DL160 Generation 8 (Gen8)
Additional Options
NOTE: Some options may not be integrated at the factory. To ensure only valid configurations are ordered, HP recommends the use of
an HP approved configurator. Contact your local sales representative for additional information.
HP Insight software
HP Insight Control
HP Insight Control including 1yr 24x7 Technical Support and Updates Single Server
License
HP Insight Control Server Provisioning Media Kit
HP Insight Management Media Kit
NOTE: HP Insight Management Media Kit contains DVDs without licenses. Contains HP
Systems Insight Manager, HP Insight Control, HP Matrix Operating Environment, and
Virtual Connect Enterprise Manager software. Uses an integrated installer to perform
quick and accurate software installation and updates.
NOTE: HP Insight Control 7.2 introduces Insight Control server provisioning, a new
capability ideal for multi-server OS and firmware provisioning to ProLiant and
BladeSystem servers. Insight Control server provisioning is included and licensed as
part of HP Insight Control. A media kit, "HP Insight Control server provisioning USB
media kit" (# BD883A), including a USB, is available for customers who require a
physical copy of the media loaded with Insight Control server provisioning software.
Please note that this media kit is separate and in addition to the "HP Insight
Management DVD media kit" (#C6N31A).
HP Insight Control server deployment
HP Insight Control Server Deployment including 1yr 24x7 Support Electronic License
HP Insight Control Server Deployment including 1yr 24x7 Support Single Server License
NOTE: This license allows 1 server to be deployed. Customer will receive a printed
license entitlement certificate via physical shipment. The license entitlement certificate
must be redeemed online or via fax in order to obtain the license activation key(s).
Includes one year of 24 x 7 HP Software Technical Support Service.
NOTE: For additional license kits including electronic delivery options, please see the
Insight Rapid Deployment software QuickSpecs at:
http://h18000.www1.hp.com/products/quickspecs/12631_na/12631_na.html
DA - 14282 North America — Version 24 — April 18, 2014
C6N27A
BD883A
C6N31A
T9082AAE
452151-B21
Page 33
QuickSpecs
HP ProLiant DL160 Generation 8 (Gen8)
Additional Options
HP iLO Advanced License HP iLO Advanced including 3yr 24x7 Technical Support and Updates E-LTU
HP iLO Advanced 1 Server License with 3yr 24x7 Tech Support and Updates
HP iLO Advanced including 1yr 24x7 Technical Support and Updates Single Server
License
HP Integrated Lights-Out (iLO)
E6U64ABE
BD505A
512485-B21
HP iLO Scale Out
HP Integrated Lights-Out Scale-Out 3yr 24x7 Tech Support and Updates Flex Quantity
License
HP Integrated Lights-Out Scale-Out 1yr 24x7 Tech Support and Updates Flex Quantity
License
HP Integrated Lights-Out Scale-Out including 3yr 24x7 Tech Support and Updates Flex
Qty E-LTU
HP Integrated Lights-Out Scale-Out including 1yr 24x7 Tech Support and Updates Flex
Qty E-LTU
HP Integrated Lights-Out Scale-Out including 3yr 24x7 Tech Support and Updates
Tracking License
HP Integrated Lights-Out Scale-Out including 1yr 24x7 Tech Support and Updates
Tracking License
NOTE: Customer will receive a license entitlement certificate, which must be redeemed
online or via fax in order to obtain the license activation key(s). Includes one year of 24
x 7 HP Software Technical Support Service.
NOTE: For additional license kits, including electronic delivery options, please see the
iLO QuickSpecs at http://www.hp.com/go/iLO
BD776A
BD778A
BD776AAE
BD778AAE
BD777A
BD779A
Converged Infrastructure HP OneView
Management Software
HP OneView with iLO Advanced
HP OneView incl 3yr 24x7 Supp Phys 1 Svr Lic
HP OneView incl 3yr 24x7 Supp Flex Qty E-LTU
HP OneView Media Kit Phys No Lic
HP OneView without iLO Advanced
E5Y34A
E5Y35AAE
E5Y37A
HP OneView w/o iLO Adv incl 3yr 24x7 Supp Phys 1 Svr Lic
HP OneView w/o iLO Adv inc 3yr 24x7 Supp Flex Qty E-LTU
NOTE: For additional license kits please see the QuickSpecs at
http://h18004.www1.hp.com/products/quickspecs/14621_na/14621_na.html.
E5Y38A
E5Y39AAE
DA - 14282 North America — Version 24 — April 18, 2014
Page 34
QuickSpecs
HP ProLiant DL160 Generation 8 (Gen8)
Additional Options
HP High Performance
Clusters
HP I/O Accelerator
Options
HP Cluster Management Utility
HP Insight Cluster Management Utility 1yr 24x7 Flexible License
NOTE: This part number can be used to purchase one certificate for multiple licenses
with a single activation key. Each license is for one node (server). Customer will receive
a printed end user license agreement and license entitlement certificate via physical
shipment. The license entitlement certificate must be redeemed online in order to
obtain a license key.
HP Insight Cluster Management Utility 3yr 24x7 Flexible License
NOTE: These part numbers can be used to purchase one certificate for multiple licenses
and support with a single activation key. Each license is for one node (server). Customer
will receive a printed end user license agreement and license entitlement certificate via
physical shipment. The license entitlement certificate must be redeemed online in order
to obtain a license key. Customer also will receive a support agreement.
HP Insight Cluster Management Utility Media
NOTE: Order a minimum of one license per cluster to purchase media including
software and documentation, which will be delivered to the customer, and also licenses
CMU management. No license key is delivered or required
NOTE: For additional license kits please see the QuickSpecs at:
http://h18004.www1.hp.com/products/quickspecs/12612_na/12612_na.html
QL803B
BD476A
BD477A
Second Generation Accelerators
HP 365GB Multi Level Cell G2 PCIe ioDrive2 for ProLiant Servers
HP 785GB Multi Level Cell G2 PCIe ioDrive2 for ProLiant Servers
HP 1205GB Multi Level Cell G2 PCIe ioDrive2 for ProLiant Servers
HP 2410GB Multi Level Cell G2 PCIe ioDrive2 Duo for ProLiant Servers
NOTE: When the Full length Graphic card is installed in the system, no additional PCIe
slots is available and only embedded storage controller B120i is available for up to 4
SATA HDDs configuration
NOTE: Please see the QuickSpecs for Technical Specifications and additional
information:
http://h18004.www1.hp.com/products/quickspecs/13587_na/13587_na.html
DA - 14282 North America — Version 24 — April 18, 2014
673642-B21
673644-B21
673646-B21
673648-B21
Page 35
QuickSpecs
HP ProLiant DL160 Generation 8 (Gen8)
Additional Options
HP Security
HP Trusted Platform Module Option
NOTE: The TPM (Trusted Platform Module) is a microcontroller chip that can securely
store artifacts used to authenticate the server platform. These artifacts can include
passwords, certificates and encryption keys. Windows® BitLocker™ Drive Encryption
(BitLocker) is a data protection feature available in Windows Server® 2008. BitLocker
leverages the enhanced security capabilities of a Trusted Platform Module (TPM)
version 1.2. The TPM works with BitLocker to help protect user data and to ensure that
a server running Windows Server 2008 has not been tampered with while the system
was offline. For more information about TPM, including a white paper, go to:
www.hp.com/go/TPM.
NOTE: ProLiant OS pre-installed units will come with the partition required for TPM
deployment.
NOTE: The TPM key is unique to every TPM deployed server and must be retained.
Misplacing or losing the key could result in data loss.
HP 1U Security Gen8 Bezel Kit
HP Storage Controllers
488069-B21
664918-B21
NOTE: Embedded HP B120i Dynamic Smart Array controller supports only up to 4 SATA
drives. For SAS support and more than 4 drives support (in 8SFF models), a HP Smart
Array controller is required.
SAS Controllers
Smart Array P222 Controller
HP Smart Array P222/512 FBWC 6Gb 1-port Int/1-port Ext SAS Controller
NOTE: Mini SAS 700mm cable (PN 662963-B21) required with this controller.
631667-B21
NOTE: HP Smart Array P222 controller can only be installed in the external PCI-e slot.
NOTE: HP Smart Array P222 controller is supported on LFF models only.
HP Smart Array P420 Controller
HP Smart Array P420/2GB FBWC 6Gb 2-ports Int SAS Controller
HP Smart Array P420/1GB FBWC 6Gb 2-ports Int SAS Controller
NOTE: HP Smart Array P420 controller can only be installed in the internal PCI-e slot. It
is not supported on external PCI-e slot.
HP Smart Array P421 Controller
631671-B21
631670-B21
HP Smart Array P421/2GB FBWC 6Gb 2-ports Ext SAS Controller
HP Smart Array P421/1GB FBWC 6Gb 2-ports Ext SAS Controller
HP Smart Array P822 Controller
631674-B21
631673-B21
HP Smart Array P822/2GB FBWC 6Gb 2-ports-Int/4-ports Ext SAS Controller
NOTE: Requires two cable kits (P/N: 676895-B21 and P/N: 662963-B21) with 8SFF
models.
Optional upgrades
615418-B21
HP 2GB P-series Smart Array Flash Backed Write Cache
HP 1GB P-series Smart Array Flash Backed Write Cache
HP 512MB B-series 36 inch Dynamic Smart Array Flash Backed Write Cache for ML/DL
NOTE: This upgrade is for HP Dynamic Smart Array B120i controller. It is required for
implementing RAID 5.
631681-B21
631679-B21
631922-B21
DA - 14282 North America — Version 24 — April 18, 2014
Page 36
QuickSpecs
HP ProLiant DL160 Generation 8 (Gen8)
Additional Options
HP Mini SAS 800mm Gen8 Cable Kit
NOTE: This cable option kit is required with HP Smart Array P822/ 2GB FBWC controller.
676895-B21
HP Mini SAS 700mm Gen8 Cable Kit
NOTE: This cable option kit is required with HP Smart Array P822/ 2GB FBWC controller,
HP Smart Array P222/512 FBWC controller and H222 Host bus adapter.
NOTE: Please see the QuickSpecs for Technical Specifications and additional
information:
http://h18000.www1.hp.com/products/quickspecs/14227_na/14227_na.html
(Smart Array P222 Controller)
http://h18000.www1.hp.com/products/quickspecs/14228_na/14228_na.html
(Smart Array P420 Controller)
http://h18000.www1.hp.com/products/quickspecs/14229_na/14229_na.html
(Smart Array P421 Controller)
http://h18000.www1.hp.com/products/quickspecs/14337_na/14337_na.html
(Smart Array P822 Controller)
HP Smart Array Advanced Pack
662963-B21
http://h18000.www1.hp.com/products/quickspecs/13200_na/13200_na.html
(SAAP)
Host Bus Adapter
HP SC11Xe Ultra320 Single Channel/ PCIe x4 SCSI Host Bus Adapter
NOTE: Supports SCSI Tapes only, no RAID support.
NOTE: HBA is recommended for SCSI tape drive support.
412911-B21
HP H220 Host Bus Adapter
HP H221 PCIe 3.0 SAS Host Bus Adapter
HP H221 Host Bus Adapter
NOTE: This is a 2 x4 External Port HBA.
NOTE: This is only approved for the HP P2000 G3 SAS Modular Smart and tape drives.
650933-B21
729552-B21
650931-B21
HP H222 Host Bus Adapter
NOTE: Mini SAS 700mm cable (PN 662963-B21) required with this controller
NOTE: HP H222 Host Bus Adapter is supported on LFF models only.
650926-B21
NOTE: Please see the QuickSpecs for Technical Specifications and additional
information:
http://h18004.www1.hp.com/products/quickspecs/12566_na/12566_na.html
(SC11Xe HBA)
http://h18004.www1.hp.com/products/quickspecs/14336_na/14336_na.html
(HBA 220)
http://h18004.www1.hp.com/products/quickspecs/14222_na/14222_na.html
(HBA 221)
http://h18004.www1.hp.com/products/quickspecs/14337_na/14337_na.html
(HBA 222)
DA - 14282 North America — Version 24 — April 18, 2014
Page 37
QuickSpecs
HP ProLiant DL160 Generation 8 (Gen8)
Additional Options
HP Tape Backup
HP Disk Backup
NOTE: For the complete range of tape drives, autoloaders, libraries and media see:
http://www.hp.com/go/tape. For hardware and software compatibility of HP tape
backup products see: http://www.hp.com/storage/SPOCK and
http://www.hp.com/go/ebs.
NOTE: For Internal drives to be connected to DL servers please make sure that you
order rack mount kit as well.
HP StoreEver LTO-6 Ultrium 6250 Tape Drive in 1U Rack-mount Kit
HP StoreEver LTO-6 Ultrium 6650 SAS Internal Tape Drive
HP StoreEver LTO-6 Ultrium 6650 SAS External Tape Drive
HP StoreEver LTO-6 Ultrium 6250 Internal Tape Drive
HP StoreEver LTO-6 Ultrium 6250 External Tape Drive
C0L99A
EH963A
EH964A
EH969A
EH970A
NOTE: For the complete range of RDX drives and media see:
http://www.hp.com/go/rdx. For hardware and software compatibility of HP disk backup
products see: http://www.hp.com/storage/SPOCK.
HP RDX Removable Disk Backup System
HP RDX320 USB3.0 External Disk Backup System
HP RDX500 USB3.0 Internal Disk Backup System
HP RDX500 USB3.0 External Disk Backup System
HP RDX1000 USB3.0 Internal Disk Backup System
HP RDX1000 USB3.0 External Disk Backup System
NOTE: Please see the QuickSpecs for additional part numbers, Technical Specifications,
and additional information:
http://h18000.www1.hp.com/products/quickspecs/13036_na/13036_na.html
(Worldwide)
HP StoreOnce Backup systems
B7B63A
B7B64A
B7B66A
B7B67A
B7B69A
HP StoreOnce 2620 iSCSI Backup
NOTE: Please see the QuickSpecs for additional part numbers, Technical Specifications,
and additional information:
http://h18000.www1.hp.com/products/quickspecs/14450_na/14450_na.html
(Worldwide)
BB852A
DA - 14282 North America — Version 24 — April 18, 2014
Page 38
QuickSpecs
HP ProLiant DL160 Generation 8 (Gen8)
Additional Options
HP Storage Options
Fibre Channel HBA
NOTE: The following is a list of all Fibre Channel Host Bus Adapters for Windows and
Linux. For detailed compatibility information please see:
http://h18006.www1.hp.com/storage/saninfrastructure/hba.html
Brocade Fibre Channel HBAs
HP 81B 8Gb 1-port PCIe Fibre Channel Host Bus Adapter
HP 82B 8Gb 2-port PCIe Fibre Channel Host Bus Adapter
Emulex Fibre Channel HBAs
AP769B
AP770B
HP 81E 8Gb 1-port PCIe Fibre Channel Host Bus Adapter
HP 82E 8Gb 2-port PCIe Fibre Channel Host Bus Adapter
HP SN1000E 16Gb 1-port PCIe Fibre Channel Host Bus Adapter
AJ762B
AJ763B
QR558A
HP StoreFabric SN1100E 16Gb Single Port Fibre Channel Host Bus Adapter
HP SN1000E 16Gb 2-port PCIe Fibre Channel Host Bus Adapter
HP StoreFabric SN1100E 16Gb Dual Port Fibre Channel Host Bus Adapter
QLogic Fibre Channel HBAs
C8R38A
QR559A
C8R39A
HP 81Q 8Gb 1-port PCIe Fibre Channel Host Bus Adapter
HP 82Q 8Gb 2-port PCIe Fibre Channel Host Bus Adapter
HP StoreFabric SN1000Q 16GB 1-port PCIe Fibre Channel Host Bus Adapter
HP StoreFabric SN1000Q 16GB 2-port PCIe Fibre Channel Host Bus Adapter
Converged Network Adapter
AK344A
AJ764A
QW971A
QW972A
HP CN1100E Dual Port Converged Network Adapter
HP StoreFabric CN1100R Dual Port Converged Network Adapter
BK835A
QW990A
HP Uninterruptible Power HP Rack-mountable UPS
Systems
HP R1500 G3 Uninterruptible Power Supply (UPS)
HP R1.5kVA G3 1U Uninterruptible Power System
NOTE: Please see the QuickSpecs for Technical Specifications and additional
information:
http://h18000.www1.hp.com/products/quickspecs/14059_na/14059_na.html
HP R/T3000 G2 Uninterruptible Power System (UPS)
AF469A
HP R/T3000 G2 2U L530 Low Voltage Uninterruptible Power System
HP R/T3000 G2 2U L620 High Voltage Uninterruptible Power System
NOTE: Please see the QuickSpecs for Technical Specifications and additional
information:
http://h18000.www1.hp.com/products/quickspecs/14058_na/14058_na.html
R5000 Uninterruptible Power System (UPS)
AF466A
AF467A
HP R5KVA 3U L630 High Voltage Uninterruptible Power System
NOTE: Please see the QuickSpecs for Technical Specifications and additional
information:
http://h18000.www1.hp.com/products/quickspecs/14109_na/14109_na.html
R7000 Uninterruptible Power System (UPS)
AF460A
DA - 14282 North America — Version 24 — April 18, 2014
Page 39
QuickSpecs
HP ProLiant DL160 Generation 8 (Gen8)
Additional Options
HP R7KVA 4U 50A High Voltage Uninterruptible Power System
NOTE: Please see the QuickSpecs for Technical Specifications and additional
information:
http://h18000.www1.hp.com/products/quickspecs/14110_na/14110_na.html
NOTE: For additional information on HP Uninterruptable Power Systems please go to:
www.hp.com/servers/rackups.
NOTE: For additional information on sizing your server, please reference:
http://www.upssizer.com
NOTE: Please see the UPS and PDU cable matrix's on the HP Power Protection and
Management page. Under Power Cords, click on the "HP Power Cord Matrix" link. That
link will list cable descriptions, requirements, and specifications for UPS and PDU units.
Please see the following link: www.hp.com/products/powercords.
HP Power Distribution
Units
NOTE: Please see the QuickSpecs for Technical Specifications and additional
information:
http://h18000.www1.hp.com/products/quickspecs/12118_na/12118_na.html
NOTE: For additional information on HP Power Distribution Units including accessories
please go to: www.hp.com/go/pdu.
NOTE: Please see the UPS and PDU cable matrix's on the HP Power Protection and
Management page. Under Power Cords, click on the "HP Power Cord Matrix" link. That
link will list cable descriptions, requirements, and specifications for UPS and PDU units.
Please see the following link: www.hp.com/products/powercords.
NOTE: Please see the following QuickSpecs for additional options including shorter
jumper cables and country specific power cords:
http://h18000.www1.hp.com/products/quickspecs/11041_na/11041_na.html
HP Intelligent Power
Distribution Units (iPDU)
iPDU Core Units
AF462A
HP 4.9kVA 24A Single Phase Core Intelligent Modular Power Distribution Unit
HP 8.6kVA 24A Three Phase Core Intelligent Modular Power Distribution Unit
iPDU Extension Bars
AF520A
AF522A
HP 5xC13 Intelligent PDU Extension Bar G2 Kit
HP 5xC13 Outlets Power and UID LEDs Pair Standard Extension Bar
AF547A
AF528A
DA - 14282 North America — Version 24 — April 18, 2014
Page 40
QuickSpecs
HP ProLiant DL160 Generation 8 (Gen8)
Additional Options
HP Basic Power
Distribution Units
HP Rack Series
HP 1.9kVA 120 Volt L5-20 Input (12xNEMA 5-20R) NA/JP Basic PDU
HP 2.8kVA 120 Volt L5-30 Input (18xNEMA 5-20R) NA/JP Basic PDU
HP 3.6kVA 200-240 Volt Detachable C20 Input ( 12xC13) WW Basic PDU
HP 3.6kVA 200-240 Volt Detachable C20 Input (18xC13) WW Basic PDU
HP 4.9kVA 208 Volt L6-30 Input (20xC13) NA/JP Basic PDU
HP 4.9kVA 208 Volt L6-30 Input (24xC13/6xC19) NA/JP Basic PDU
HP 8.3kVA 208 Volt CS8265C Input (30xC13/6xC19) NA/JP Basic PDU
HP 8.6kVA 208 Volt L15-30 3-Phase Input (18xC13) NA/JP Basic PDU
HP 8.6kVA 208 Volt L15-30 3-Phase Input (24xC13/6xC19) NA/JP Basic PDU
HP 5.7kVA 208 Volt L21-20 3-Phase Input (24xC13/3xNEMA 5-20R) NA/JP Basic PDU
H5M54A
H5M55A
H5M56A
H5M57A
H5M58A
H5M59A
H5M60A
H5M61A
H5M62A
H5M63A
HP 8.6kVA 208 Volt L21-30 3-Phase Input (24xC13/3xC19/3xNEMA 5-20R) NA/JP Basic
PDU
HP 11kVA 400 Volt IEC309 30A 3-Phase Input (36xC13/6xC19) NA Basic PDU
HP Hardwired 200-240 Volt Input (30xC13/6xC19) WW Basic PDU
HP 13.2kVA 480 Volt IEC309 30A 3-Phase Input (15 Outlet) NA Basic PDU
HP 19.9kVA 480 Volt IEC309 30A 3-Phase Input (30 Outlet) NA Basic PDU
HP 277 Volt options for H3X07A and H3X08A
H5M64A
HP 800VA - 277V Input / 230V Output NA Rack Mount Transformer
NOTE: Please see the QuickSpecs for Technical Specifications and additional
information:
http://h18000.www1.hp.com/products/quickspecs/14557_na/14557_na.html
NOTE: Additional HP Power Distribution Units are available. For a complete list of all HP
PDUs and additional information please visit: www.hp.com/go/rackandpower.
H3X09A
H5M67A
H5M75A
H3X07A
H3X08A
Rack Intelligent Series rack
HP 636 1075mm Pallet Intelligent Series Rack
HP 636 1075mm Shock Intelligent Series Rack
HP 642 1075mm Pallet Intelligent Series Rack
HP 642 1075mm Shock Intelligent Series Rack
HP 647 1075mm Pallet Intelligent Series Rack
HP 647 1075mm Shock Intelligent Series Rack
NOTE: Please see the QuickSpecs for additional information:
http://h18000.www1.hp.com/products/quickspecs/14223_na/14223_na.html
NOTE: The increasing power of new high-performance processor technology requires
increased cooling efficiency for rack-mounted servers. The 10000 G2 Series Racks
provide enhanced airflow for maximum cooling, allowing these racks to be fully loaded
with servers using the latest processors.
CAUTION: If a third-party rack is used, observe the following additional requirements to
ensure adequate airflow and to prevent damage to the equipment: Front and rear
doors: If your 42U server rack includes closing front and rear doors, you must allow
5,350 sq cm (830 square inches) of hole evenly distributed from top to bottom to
permit adequate airflow (equivalent to the required 64 percent open area for
ventilation). Side: The clearance between the installed rack component and the side
DA - 14282 North America — Version 24 — April 18, 2014
BW895A
BW896A
BW903A
BW904A
BW911A
BW912A
Page 41
QuickSpecs
HP ProLiant DL160 Generation 8 (Gen8)
Additional Options
panels of the rack must be a minimum of 7 cm (2.75 inches).
CAUTION: Always use blanking panels to fill all remaining empty front panel U-spaces in
the rack. This arrangement ensures proper airflow. Using a rack without blanking
panels results in improper cooling that can lead to thermal damage.
NOTE: Quick deploy rail system provides tool-free support for racks with square or
round mounting holes (including Compaq/HP 7000, 9000, 10000 G2 and HP series), with
an adjustment range of 24" - 36". The ambidextrous cable management arm can be
mounted on either the left or right side for improved cable management.
NOTE: High Airflow Inserts (High Air Flow Rack Door Insert for the 7142 Rack (single) PN: 327281-B21; or High Air Flow Rack Door Insert for the 7142 Rack (6-pack) - PN:
327281-B22) are required to support the HP ProLiant DL160 in 7000 series racks. Cable
Management Arm is not supported on 7000 series racks.
NOTE: Cable management arm must be removed to access power supplies when the
cable management arm is mounted on the right.
HP Rack Options
HP Location Discovery Services
HP 36U Location Discovery Kit
HP 42U Location Discovery Kit
HP 47U Location Discovery Kit
NOTE: Please see the QuickSpecs for Technical Specifications and additional
information:
http://h18000.www1.hp.com/products/quickspecs/14429_na/14429_na.html
HP USB Keyboard and Mouse
HP USB BFR with PVC Free Keyboard/Mouse Kit
NOTE: Please see the QuickSpecs for Technical Specifications and additional
information:
http://h18000.www1.hp.com/products/quickspecs/13972_na/13972_na.html
HP TFT7600 G2 KVM Console Rackmount Keyboard Monitor
631341-B21
HP TFT7600 G2 KVM Console Rackmount Keyboard US Monitor
HP TFT7600 G2 KVM Console Rackmount Keyboard US TAA Monitor
NOTE: Please see the QuickSpecs for Technical Specifications and additional
information:
http://h18000.www1.hp.com/products/quickspecs/13731_na/13731_na.html
HP Server Console Switches
AZ870A
AZ885A
HP Server Console 0x2x8 Port Analog Switch
HP Server Console 0x2x16 Port Analog Switch
HP TAA 0x2x16xKVM Server Console G2 Switch
NOTE: Please see the QuickSpecs for Technical Specifications and additional
information:
http://h18000.www1.hp.com/products/quickspecs/11834_na/11834_na.html
HP Server Console Switch G2 with Virtual Media & CAC
AF616A
AF617A
AF626A
HP 0x2x16 KVM Server Console Switch G2 with Virtual Media CAC Software
HP 0x2x32 KVM Server Console Switch G2 with Virtual Media CAC Software
HP KVM CAT5 1-pack USB Interface Adapter
DA - 14282 North America — Version 24 — April 18, 2014
AF618A
AF619A
336047-B21
Page 42
QuickSpecs
HP ProLiant DL160 Generation 8 (Gen8)
Additional Options
NOTE: Please see the QuickSpecs for Technical Specifications and additional
information:
http://h18000.www1.hp.com/products/quickspecs/13475_na/13475_na.html
HP 1x4 USB/PS2 KVM Console Switch
HP 1x4 USB/PS2 KVM Console Switch
HP 1x1Ex8 KVM IP Console Switch G2 with Virtual Media CAC Software
HP 2x1Ex16 KVM IP Console Switch G2 with Virtual Media CAC Software
HP 4x1Ex32 KVM IP Console Switch G2 with Virtual Media CAC Software
NOTE: Please see the QuickSpecs for Technical Specifications and additional
information:
http://h18000.www1.hp.com/products/quickspecs/13474_na/13474_na.html
Rack Kits
AF611A
AF620A
AF621A
AF622A
HP Rack Cable Management Velcro Clips
HP 1U Small Form Factor Ball Bearing Gen8 Rail Kit
NOTE: For SFF models.
379820-B21
663201-B21
HP 1U Cable Management Arm for Ball Bearing Gen8 Rail Kit
HP 1U Large Form Factor Ball Bearing Gen8 Rail Kit
NOTE: For LFF models.
663203-B21
663202-B21
NOTE: For additional information regarding Rack Cabinets and Telco Rack support,
please see the following URL: www.hp.com/go/rackandpower.
HP Flash Media Kits for
USB Drives
HP Flash Media Kits for USB Drives
HP 2GB USB Flash Media Drive Key Kit
NOTE: HP qualified blank USB key for use with HP ProLiant servers that support the
VMware virtualization environment and other HP value-add software like SmartStart.
HP recommends this industry standard USB flash device for use with VMware ESXi. USB
device must be installed in the internal slot of the ProLiant server for use with VMware
ESXi. Refer to HP VMware Getting Started Guide for installation instructions.
NOTE: Blank SD media device is supported for use with VMware and Citrix. SD media
must be installed in the internal slot of the ProLiant server. Learn more at
http://www.hp.com/go/proliantvirtualization.
HP Enterprise Mainstream Flash Media Kits for Memory Cards
608447-B21
HP 8GB SD Enterprise Mainstream Flash Media Kit
HP 8GB USB Enterprise Mainstream Flash Media Drive Key Kit
HP 32GB SD Enterprise Mainstream Flash Media Kit
726113-B21
737953-B21
700136-B21
DA - 14282 North America — Version 24 — April 18, 2014
Page 43
QuickSpecs
HP ProLiant DL160 Generation 8 (Gen8)
Additional Options
HP Care Pack Services
Proactive Care - Collaborative Support plus Proactive services delivered by the on
shore/near shore Advanced Solution Center (ASC) and backed by the global delivery
organization, end-to-end case ownership from a Technical Solution Specialists and
Technical Account Manager who remotely delivers firmware/software revision
management, proactive scans and incident trend reports. Recommended for customers
running a virtualized infrastructure and/or customers who desire an enhanced call
support experience.
HP 3 year Next business day ProLiant DL16x Proactive Care Service
Proactive Care Personalized Support Environmental Option - to add an onsite
Account Support Manager (ASM) to Proactive Care. ASM is an assigned resource who
delivers support planning and brings technical expertise and best practices advice for
the customer's environment.
HP 3 year ISS ProactiveCare Personalized Support
HP 3 year 6 hour Call To Repair 24x7 withDefective Media Retention ProLiant DL16x
Proactive Care SVC
HP 3 year 4 hour 24x7 ProLiant DL16x Proactive Care Service
HP 3 year Next business day with Defective Media Retention ProLiant DL16x Proactive
Care Service
HP 3 year 4 hour 24x7 with Defective Media Retention ProLiant DL16x Proactive Care
Service
HP 3 year 6 hour Call To Repair 24x7 ProLiant DL16x Proactive Care Service
HP 3 year Next business day ProLiant DL16x Collaborative Support
HP 3 year 4 hour 24x7 ProLiant DL16x Collaborative Support
HP 3 year Next business day with Defective Media Retention ProLiant DL16x
Collaborative Support
HP 3 year 4 hour 24x7 with Defective Media Retention ProLiant DL16x Collaborative
Support
HP 3 year 6 hour Call To Repair 24x7 ProLiant DL16x Collaborative Support
HP 3 year 6hr Call To Repair 24x7 withDefective Media Retention ProLiant DL16x
Collaborative Support
HP 3 year 6 hour 24x7 Call to Repair with Defective Media Retention BL6xxc Server
Blade HW Support
UH745E - reduce the time required to get your system up and running and help
minimize disruptions to your business.
HP Install ProLiant DL14x and DL16x Service
HP Installation of ProLiant Add On/In Options Service
Additional HP Care Pack services can be found at: http://www.hp.com/go/cpc
DA - 14282 North America — Version 24 — April 18, 2014
U3A12E
U6W98E
U3A25E
U3A18E
U3A15E
U3A21E
U3A24E
U1J92E
U1J98E
U1J95E
U1K01E
U1K04E
U1K05E
UK121E
U9520E
UH745E
Page 44
QuickSpecs
HP ProLiant DL160 Generation 8 (Gen8)
Memory
HP SmartMemory
New HP SmartMemory now provides additional protection for your servers. With HP Authentication it can verify that you have true HP
Qualified Memory in your HP ProLiant Gen8 server. With HP SmartMemory your new HP ProLiant server can take advantage of
additional Gen8 enhancements in performance, durability and future manageability support through HP Active Health System.
For detailed memory configuration rules and guidelines, please use the Online DDR3 Memory Configuration Tool:
www.hp.com/go/ddr3memory-configurator
HP ProLiant DL160 Gen8
NOTE: Memory configurations listed do not apply to "Factory Integrated Models".
Standard Memory
4GB (1x4GB) , 8GB (2 x 4GB) or 16GB(4 x 4GB) depending on model, DDR3-1333MHz Registered RDIMM memory
Maximum Memory
Up to 768GB
NOTE: Charts do not represent all possible memory configurations.
DDR3 memory population guidelines
NOTE: For detailed memory configuration rules and guidelines, please use the Online DDR3 Memory Configuration Tool:
www.hp.com/go/ddr3memory-configurator
Some DIMM installation guidelines are summarized below:
For servers with twenty-four (24) memory slots:
There are four (4) channels per processor; eight (8) channels per server
There are three (3) DIMM slots for each memory channel; twenty-four (24) total slots
White DIMM slots denote the first slot of a channel. For 1 DPC (DIMM per channel) populate white slots only.
Install DIMMs only if the corresponding processor is installed.
If only one processor is installed in a two processor system, only half of the DIMM slots are available.
When two processors are installed, balance the DIMMs across the two processors.
To maximize performance, balance the total memory capacity between all installed processors
Populate DIMMs from heaviest load (quad-rank) to lightest load (single-rank) within a channel
Heaviest load (DIMM with most ranks) within a channel goes furthest from the processor
Do not mix UDIMMs, RDIMMs or LRDIMMs
LR DIMMs are supported up to 3 DIMMs per channel.
DIMMs of different voltages (1.35V & 1.5V) may be mixed in any order
The system will power them at the higher voltage
DIMMs of different speed grades may be mixed in any order
The system will select a common optimal speed
To realize the performance memory capabilities listed in this document, HP SmartMemory is required. For
additional information, please see the HP SmartMemory QuickSpecs at:
http://h18000.www1.hp.com/products/quickspecs/14225_na/14225_na.html (Worldwide)
DA - 14282 North America — Version 24 — April 18, 2014
Page 45
QuickSpecs
HP ProLiant DL160 Generation 8 (Gen8)
Memory
DIMM
Type
DIMM slot/capacity/populated speed table
Load
Reduced
Registered DIMMS (RDIMMs)
(LRDIMMs)
Unbuffered with ECC DIMMs (UDIMMs)
Single
Quad Rank Rank
Single Rank (1R)
Dual Rank (2R)
(4R)
(1R)
Dual Rank (2R)
DIMM
Rank
DIMM
4GB
4GB
8GB
Capacity
DIMM
Native
1333 1600 1600
Speed
(MHz)
LV
Std
Std
SLOTS THAT CAN BE POPULATED
24 slot
24
24
24
servers
MAXIMUM CAPACITY (GB)*
96
96
192
8GB
8GB
16GB
16GB
32GB
2GB
2GB
4GB
4GB
8GB
8GB
1333
1600
1333
1600
1333
1600
1333
1600
1333
1333
1600
LV
Std
LV
Std
LV
Std
LV
Std
LV
LV
Std
24
24
24
24
24
16
16
16
16
16
16
192
192
384
384
768
32
32
64
64
128
128
1600
1333
1600
1333
1333
1600
POPULATED DIMM SPEED (MHz)
1 DIMM
1600
Per
1333 1600 1600 1333 1600 1333
1333***
Channel
2 DIMM
Per
1333 1600 1600 1333 1600 1333 1600 1333***
Channel
3 DIMM
Per
1066** 1333## 1333## 1066** 1333## 1066** 1333## 1066
Channel
NOTES:
1600 1333**** 1600 1333**** 1333**** 1600
n/a
n/a
n/a
n/a
n/a
n/a
Memory speed is a function of the processor QPI bus speed.
* Maximum capacity will vary based on individual server platform qualification schedule
** For HP SmartMemory, RDIMM support 3DPC@1066 at 1.35V. Third party memory may only support up to 3DPC@1066 at 1.5V.
*** LRDIMM enables 3 DIMMs per channel. HP SmartMemory will support up to 3DPC@1066 at 1.35V. Third party memory may only
support 3DPC @1066 at 1.5V.
**** For HP SmartMemory, UDIMM is supported at 2DPC@1333. Third party memory may only support up to 2DPC@1066
## RBSU setting required
Memory Speed by Processor Model
Processor Models
E5-2680, E5-2670, E5-2667, E5-2665, E5-2660, E5-2650, E5-2650L
E5-2640, E5-2630, E5-2630L, E5-2620
E5-2609, E5-2603
DA - 14282 North America — Version 24 — April 18, 2014
Supported Memory Speeds
1600/1333/1066MHz
1333/1066MHz
1066MHz
Page 46
QuickSpecs
HP ProLiant DL160 Generation 8 (Gen8)
Memory
Standard and Maximum Memory Capacity (Pre-configured Models)
Pre Configured Models
Standard Memory
Intel Xeon E5-2640
Intel Xeon E5-2620
Intel Xeon E5-2603
16GB (4x 4GB)
8GB (2x 4GB)
4GB (1x 4GB)
Maximum Memory Plus
Optional Memory
336GB (20x16GB, 4x4GB)
360GB (22x16GB, 2x4GB)
372GB (23x16GB, 1x4GB)
Standard Memory Replaced
with Optional Memory
768GB (24 x 32GB)
768GB (24 x 32GB)
768GB (24 x 32GB)
DIMM slot and configuration diagrams
Basic memory slot & population diagram
Population order; start with "A" first, "B" second, "C" third, etc.
24 DIMM SLOTS (12 per CPU node)
CPU1
CPU2
slot #
1
2
3
population order
A
E
I
slot #
1
2
3
population order
C
G
K
Chnl 2
4
5
6
B
F
J
4
5
6
D
H
L
Chnl 2
Chnl 3
7
8
9
L
H
D
7
8
9
J
F
B
Chnl 3
Chnl 4
10
11
12
K
G
C
10
11
12
I
E
A
Chnl 4
Chnl 1
Chnl 1
Standard memory configuration (1 CPU model)
8GB, consisting of four (4) 2GB dual-rank PC3-10600 UDIMMs
DA - 14282 North America — Version 24 — April 18, 2014
Page 47
QuickSpecs
HP ProLiant DL160 Generation 8 (Gen8)
Memory
CPU1
CPU2
slot #
1
2
3
population order
A; 2GB DIMM
E; empty
I; empty
slot #
1
2
3
population order
C; empty
G; empty
K; empty
Chnl 2
4
5
6
B; 2GB DIMM
F; empty
J; empty
4
5
6
D; empty
H; empty
L; empty
Chnl 2
Chnl 3
7
8
9
L; empty
H; empty
D; 2GB DIMM
7
8
9
J; empty
F; empty
B; empty
Chnl 3
Chnl 4
10
11
12
K; empty
G; empty
C; 2GB DIMM
10
11
12
I; empty
E; empty
A; empty
Chnl 4
Chnl 1
Chnl 1
Standard memory plus optional memory (1 CPU model)
60GB, consisting of three (3) 4GB RDIMMs plus six (6) 8GB RDIMMs
3x 4GB dual-rank PC3-10600 RDIMMs
6x 8GB dual-rank PC3-10600 RDIMMs
CPU1
CPU2
slot #
1
2
3
population order
A; 4GB DIMM
E; 8GB DIMM
I; 8GB DIMM
slot #
1
2
3
population order
C; empty
G; empty
K; empty
Chnl 2
4
5
6
B; 4GB DIMM
F; 8GB DIMM
J; empty
4
5
6
D; empty
H; empty
L; empty
Chnl 2
Chnl 3
7
8
9
L; empty
H; 8GB DIMM
D; 8GB DIMM
7
8
9
J; empty
F; empty
B; empty
Chnl 3
Chnl 4
10
11
12
K; empty
G; 8GB DIMM
C; 4GB DIMM
10
11
12
I; empty
E; empty
A; empty
Chnl 4
Chnl 1
Chnl 1
Standard memory replaced with optional memory (1 CPU model)
RDIMM maximum configuration
192GB, consisting of twelve (12) 16GB quad-rank PC3L-10600 RDIMMs
DA - 14282 North America — Version 24 — April 18, 2014
Page 48
QuickSpecs
HP ProLiant DL160 Generation 8 (Gen8)
Memory
CPU1
CPU2
slot #
1
2
3
population order
A; 16GB DIMM
E; 16GB DIMM
I; 16GB DIMM
slot #
1
2
3
population order
C; empty
G; empty
K; empty
Chnl 2
4
5
6
B: 16GB DIMM
F; 16GB DIMM
J; 16GB DIMM
4
5
6
D; empty
H; empty
L; empty
Chnl 2
Chnl 3
7
8
9
L; 16GB DIMM
H; 16GB DIMM
D; 16GB DIMM
7
8
9
J; empty
F; empty
B; empty
Chnl 3
Chnl 4
10
11
12
K; 16GB DIMM
G; 16GB DIMM
C; 16GB DIMM
10
11
12
I; empty
E; empty
A; empty
Chnl 4
Chnl 1
Chnl 1
UDIMM maximum configuration (1 CPU model)
64GB, consisting of eight (8) 4GB dual-rank PC3-10600 UDIMMs
CPU1
CPU2
slot #
1
2
3
population order
A; 8GB DIMM
E; 8GB DIMM
I; empty
slot #
1
2
3
population order
C; empty
G; empty
K; empty
Chnl 2
4
5
6
B; 8GB DIMM
F; 8GB DIMM
J; empty
4
5
6
D; empty
H; empty
L; empty
Chnl 2
Chnl 3
7
8
9
L; empty
H; 8GB DIMM
D; 8GB DIMM
7
8
9
J; empty
F; empty
B; empty
Chnl 3
Chnl 4
10
11
12
K;
G; 8GB DIMM
C; 8GB DIMM
10
11
12
I; empty
E; empty
A; empty
Chnl 4
Chnl 1
Chnl 1
Standard memory replaced with optional memory (2 CPU model)
RDIMM maximum configuration
768GB, consisting of twenty-four (24) 32GB quad-rank PC3-10600 LRDIMMs DDR3 Registered (LRDIMM) memory, operating at
1333MHz or 1066MHz when populated at 3 DIMMs per Channel in 24 slots.
DA - 14282 North America — Version 24 — April 18, 2014
Page 49
QuickSpecs
HP ProLiant DL160 Generation 8 (Gen8)
Memory
CPU1
CPU2
slot #
1
2
3
population order
A; 32GB DIMM
E; 32GB DIMM
I; 32GB DIMM
slot #
1
2
3
population order
A; 32GB DIMM
E; 32GB DIMM
I; 32GB DIMM
Chnl 2
4
5
6
B; 32GB DIMM
F; 32GB DIMM
J; 32GB DIMM
4
5
6
B; 32GB DIMM
F; 32GB DIMM
J; 32GB DIMM
Chnl 2
Chnl 3
7
8
9
L; 32GB DIMM
H; 32GB DIMM
D; 32GB DIMM
7
8
9
L; 32GB DIMM
H; 32GB DIMM
D; 32GB DIMM
Chnl 3
Chnl 4
10
11
12
K; 32GB DIMM
G; 32GB DIMM
C; 32GB DIMM
10
11
12
K; 32GB DIMM
G; 32GB DIMM
C; 32GB DIMM
Chnl 4
Chnl 1
Chnl 1
UDIMM maximum configuration (2 CPU model)
128GB, consisting of sixteen (16) 8GB dual-rank PC3-10600E DDR3 Unbuffered (UDIMM) memory operating at 1333MHz when
populated at 2 DIMMs per Channel in 16 slots
CPU1
CPU2
slot #
1
2
3
population order
A; 8GB DIMM
E; 8GB DIMM
I; empty
slot #
1
2
3
population order
C; 8GB DIMM
G; 8GB DIMM
K; empty
Chnl 2
4
5
6
B; 8GB DIMM
F; 8GB DIMM
J; empty
4
5
6
D; 8GB DIMM
H; 8GB DIMM
L; empty
Chnl 2
Chnl 3
7
8
9
L; empty
H; 8GB DIMM
D; 8GB DIMM
7
8
9
J; empty
F; 8GB DIMM
B; 8GB DIMM
Chnl 3
Chnl 4
10
11
12
K; empty
G; 8GB DIMM
C; 8GB DIMM
10
11
12
I; empty
E; 8GB DIMM
A; 8GB DIMM
Chnl 4
Chnl 1
Chnl 1
NOTE: Capacity references are rounded to the common Gigabyte values.
1GB = 1024MB
2GB = 2048MB
4GB = 4096MB
DA - 14282 North America — Version 24 — April 18, 2014
Page 50
QuickSpecs
HP ProLiant DL160 Generation 8 (Gen8)
Memory
8GB = 8192MB
16 GB=16384MB
32GB = 32768MB
DDR3 memory options part number decoder
Following are memory options available from HP:
HP Memory
NOTE: HP memory from previous generation servers are not qualified or warranted
with this HP ProLiant Server. HP SmartMemory is required to realize the memory
performance improvements and enhanced functionality listed in this document for
Gen8. For additional information, please see the HP SmartMemory QuickSpecs at:
http://h18000.www1.hp.com/products/quickspecs/14225_na/14225_na.html
NOTE: LRDIMM, RDIMM and UDIMMs are all distinct memory technologies and cannot be
mixed within a server. The majority of ProLiant Gen8 servers support RDIMM, UDIMM
and LRDIMM.
Registered DIMMs (RDIMMs)
HP 4GB (1x4GB) Single Rank x4 PC3L-10600R (DDR3-1333) Registered CAS-9 Low
Voltage Memory Kit
HP 4GB (1x4GB) Single Rank x4 PC3-12800R (DDR3-1600) Registered CAS-11 Memory
Kit
HP 8GB (1x8GB) Dual Rank x4 PC3L-10600R (DDR3-1333) Registered CAS-9 Low
Voltage Memory Kit
HP 8GB (1x8GB) Single Rank x4 PC3-12800R (DDR3-1600) Registered CAS-11 Memory
Kit
HP 8GB (1x8GB) Dual Rank x4 PC3-12800R (DDR3-1600) Registered CAS-11 Memory Kit
HP 16GB (1x16GB) Dual Rank x4 PC3L-10600R (DDR3-1333) Registered CAS-9 Low
Voltage Memory Kit
HP 16GB (1x16GB) Dual Rank x4 PC3-12800R (DDR3-1600) Registered CAS-11 Memory
Kit
Unbuffered with ECC DIMMs (UDIMMs)
DA - 14282 North America — Version 24 — April 18, 2014
647893-B21
647895-B21
647897-B21
647899-B21
690802-B21
647901-B21
672631-B21
Page 51
QuickSpecs
HP ProLiant DL160 Generation 8 (Gen8)
Memory
HP 2GB (1x2GB) Single Rank x8 PC3-12800E (DDR3-1600) Unbuffered CAS-11 Memory
Kit
HP 2GB (1x2GB) Single Rank x8 PC3L-10600E (DDR3-1333) Unbuffered CAS-9 Low
Voltage Memory Kit
HP 4GB (1x4GB) Dual Rank x8 PC3-12800E (DDR3-1600) Unbuffered CAS-11 Memory
Kit
HP 4GB (1x4GB) Dual Rank x8 PC3L-10600E (DDR3-1333) Unbuffered CAS-9 Low
Voltage Memory Kit
HP 8GB (1x8GB) Dual Rank x8 PC3-12800E (DDR3-1600) Unbuffered CAS-11 Memory
Kit
HP 8GB (1x8GB) Dual Rank x8 PC3L-10600E (DDR3-1333) Unbuffered CAS-9 Low
Voltage Memory Kit
669320-B21
647905-B21
669322-B21
647907-B21
669324-B21
647909-B21
Load Reduction DIMMs (LRDIMMs)
HP 32GB (1x32GB) Quad Rank x4 PC3L-10600L (DDR3-1333) Load Reduced CAS-9 Low
Voltage Memory Kit
NOTE: All DDR3 memory option kits consist of one DIMM per kit. For detailed memory
configuration rules and guidelines, please use the Online DDR3 Memory Configuration
Tool: www.hp.com/go/ddr3memory-configurator.
NOTE: Depending on the memory configuration and processor model, 1600MHz and
1333MHz memory may operate at a lower speed. Please see the see the "Memory"
section later in this document and the Online Memory Configuration Tool for details at:
www.hp.com/go/ddr3memory-configurator.
NOTE: For additional memory rules and guidelines, see the "Memory" section later in
this document.
NOTE: For more information on ProLiant Energy Efficient Features, see:
www.hp.com/go/proliant-energy-efficient.
NOTE: PC3L is a low voltage memory.
NOTE: Not all Intel E5 processor series support 1600MHz or 1333MHz speeds. Memory
speed is a function of the processor QPI speed.
DA - 14282 North America — Version 24 — April 18, 2014
647903-B21
Page 52
QuickSpecs
HP ProLiant DL160 Generation 8 (Gen8)
Storage
1-4
A
1-8
A
Four LFF Hot-plug SAS/SATA hard drive bays
Optional DVD-ROM, or DVD RW
Eight SFF Hot-plug SATA/SAS hard drive bays
Optional DVD-ROM, or DVD RW
Drive Support
External Storage
Quantity
Supported
Position
Supported
D2600 Disk Enclosure
Up to 4
Up to 8
External
External
D2700 Disk Enclosure
Up to 2
Up to 4
External
External
Host Controller or Adapter
HP Smart Array P222/512MB FBWC Controller
HP Smart Array P421/1GB FBWC Controller
HP Smart Array P421/2GB FBWC Controller
HP Smart Array P222/512MB FBWC Controller
HP Smart Array P421/1GB FBWC Controller
HP Smart Array P421/2GB FBWC Controller
DA - 14282 North America — Version 24 — April 18, 2014
Page 53
QuickSpecs
HP ProLiant DL160 Generation 8 (Gen8)
Technical Specifications
System Unit
Dimensions (H x W x D)
(with bezel)
4 LFF
8 SFF
Weight
(approximate)
Input Requirements
(per power supply)
BTU Rating
Power Specifications
Power Supply Output
(per power supply)
System Inlet
Temperature
Maximum
(all hard drives, power
supplies, and processors
installed)
Minimum
(one hard drive, power
supply, and processor
installed)
Rated Line Voltage
Rated Input Current
1.7" (43.2mm) Height x 17.1" (434.6mm) Width x
29.5" (750mm) Length
1.7" (43.2mm) Height x 17.1" (434.6mm) Width x
27.5" (699mm) Length
33..00 lb (15.2kg)
31 lb (14.1kg)
100 to 120 VAC, 200 to 240 VAC
10 A at 100 VAC
5 A at 200 VAC
Rated Input Frequency
50 Hz to 60 Hz
Rated Input Power
562 W at 100V AC input
562 W at 200V AC input
Maximum
500W
1917 at 100 V AC
1898 at 115 V AC
1856 at 200 V AC
1850 at 230 V AC
460W
1764 at 100V AC
1736 at 115V AC
1694 at 200V AC
1687 at 230V AC
750W
2878 at 100 V AC
2834 at 115 V AC
2769 at 200 V AC
2758 at 230 V AC
To review typical system power ratings use the Power Advisor which is
available via the online tool located at URL:
www.hp.com/go/proliant-energy-efficient
Or
www.hp.com/go/hppoweradvisor
- Click on the system of interest. Example: DL160 G8
- Follow the instructions of the next screens.
Rated Steady-State Power 500 Watts (at 100 VAC),
500 Watts (at 200 VAC)
Maximum Peak Power
500Watts (at 100 VAC),
(See Power Specifications 500 Watts (at 200 VAC)
Tables)
Operating
10° to 35°C (50° to 95°F) at sea level with an
altitude derating of 1.0°C per every 305 m (1.8°F
per every 1000 ft) above sea level to a maximum
of 3050 m (10,000 ft), no direct sustained
DA - 14282 North America — Version 24 — April 18, 2014
Page 54
QuickSpecs
HP ProLiant DL160 Generation 8 (Gen8)
Technical Specifications
Relative Humidity
(non-condensing)
Altitude
Acoustic Noise
sunlight. Maximum rate of change is 10°C/hr
(18°F/hr). The upper limit may be limited by the
type and number of options installed.
System performance may be reduced if operating
with a fan fault or above 30°C (86°F).
Non-operating
-30° to 60°C (-22° to 140°F). Maximum rate of
change is 20°C/hr (36°F/hr).
Operating
10 to 90% relative humidity (Rh), 28°C (82.4°F)
maximum wet bulb temperature, noncondensing.
Non-operating
5% to 95% relative humidity (Rh), 38.7° C (101.7°
F) maximum wet bulb temperature, noncondensing
Operating
30480 m (10,000 ft). This value may be limited by
the type and number of options installed.
Maximum allowable altitude change rate is 457
m/min (1500 ft/min).
Non-operating
9144 m (30,000 ft). Maximum allowable altitude
change rate is 457 m/min (1500 ft/min).
Listed are the declared A-Weighted sound power levels (LWAd) and declared
average bystander position A-Weighted sound pressure levels (LpAm) when
the product is operating in a 23°C ambient environment. Noise emissions were
measured in accordance with ISO 7779 (ECMA 74) and declared in accordance
with ISO 9296 (ECMA 109).
NOTE: The listed sound levels apply to standard shipping configurations.
Additional options may result in increased sound levels.
Idle
LWAd
LpAm
5.3 B (1P SKU)
5.3 B (2P SKU)
36 dBA (1P SKU)
36 dBA (2P SKU)
Operating
LWAd
Emissions Classification
(EMC)
5.3 B (1P SKU)
5.9 B (2P SKU)
LpAm
37 dBA (1P SKU)
42 dBA (2P SKU)
FCC Rating
Class A
Normative Standards
CISPR 22; EN55022; EN55024; FCC CFR 47, Pt 15;
ICES-003; CNS13438; GB9254; K22;K24; EN
61000-3-2; EN 61000-3-3; EN 60950-1; IEC
60950-1
NOTE: Product conformance to cited product specifications is based on
sample (type) testing, evaluation, or assessment. This product or family of
products is eligible to bear the appropriate compliance logos and statements.
DA - 14282 North America — Version 24 — April 18, 2014
Page 55
QuickSpecs
HP ProLiant DL160 Generation 8 (Gen8)
Technical Specifications
HP Ethernet 1Gb 2-port
361i Adapter
Network Interface
10Base-T/100Base-TX/1000Base-TX
Capability
IEEE 802.3 10Base-T
IEEE 802.3ab 1000Base-T
IEEE 802.3u 100Base-TX
IEEE 1588, IEEE 802.1AS
PCI Express v 2.1, 5.0 GT/s and 2.5 GT/s bus speeds and supports for x1, x2,
x4 links widths (Lanes)
I350 Powerville
Data Transfer Method
Controller
Network Transfer Rate
Connector
HP Dynamic Smart Array
B120i Controller
10Base-T (Half-Duplex)
10Base-T (Full-Duplex)
10 Mb/s per port, 20 Mb/s Combined
20 Mb/s per port, 40 Mb/S Combined
100Base-TX (Half-Duplex) 100 Mb/s per port, 200 Mb/s Combined
100Base-TX (Full-Duplex) 200 Mb/s per port, 400 Mb/s Combined
1000Base-TX (Half and
1000Mb/s per port, 2000 Mb/s Combined
Full-Duplex)
RJ-45
Cable Support
10Base-T Categories 3, 4 or 5 UTP; up to 328 ft (100 m)
10/100/1000Base-TX Category 5 UTP; up to 328 ft (100 m)
Dimensions
Embedded
Disk Drive and Enclosure Up to 6Gb/s SATA (Serial ATA)
Interface - Transfer rate
Connectors
6 internal SATA connectors
Server Interface
x4 PCIe 2.0
SATA Speed
6Gb/s SATA links
Cache Memory
Zero Memory RAID has no cache memory
Logical Drives Supported Up to 8 logical volumes (6 physical drives)
Host Memory Addressing 64-bit, supporting greater than 4GB server memory space
Hot Plug Support
Yes
RAID Support
RAID 0 (Striping), RAID 1 (Mirroring)
RAID 1+0 (Striping & Mirroring)
DA - 14282 North America — Version 24 — April 18, 2014
Page 56
QuickSpecs
HP ProLiant DL160 Generation 8 (Gen8)
Technical Specifications
Environment-friendly
Products and Approach
End-of-life Management Hewlett-Packard offers end-of-life HP product return, trade-in, and recycling
programs in many geographic areas. For trade-in information, please go to:
and Recycling
http://www.hp.com/go/green. To recycle your product, please go to:
http://www.hp.com/go/green or contact your nearest HP sales office.
Products returned to HP will be recycled, recovered or disposed of in a
responsible manner.
The EU WEEE directive (2002/95/EC) requires manufacturers to provide
treatment information for each product type for use by treatment facilities.
This information (product disassembly instructions) is posted on the Hewlett
Packard web site at: http://www.hp.com/go/green. These instructions may be
used by recyclers and other WEEE treatment facilities as well as HP OEM
customers who integrate and re-sell HP equipment.
© Copyright 2014 Hewlett-Packard Development Company, L.P.
The information contained herein is subject to change without notice.
Microsoft and Windows NT are US registered trademarks of Microsoft Corporation. Intel, the Intel logo, Xeon and Xeon Inside are
trademarks of Intel Corporation in the U.S. and other countries.
The only warranties for HP products and services are set forth in the express warranty statements accompanying such products and
services. Nothing herein should be construed as constituting an additional warranty. HP shall not be liable for technical or editorial
errors or omissions contained herein.
For hard drives, 1GB = 1 billion bytes. Actual formatted capacity is less.
DA - 14282 North America — Version 24 — April 18, 2014
Page 57
Download PDF
Similar pages