HP ProLiant DL380e Generation 8 (Gen8)

QuickSpecs
HP ProLiant DL380e Generation 8 (Gen8)
Overview
The HP ProLiant DL380e Gen8 sets the next generation standards of 2U 2-socket rack servers for the industry. With enhanced
configuration flexibility, unmatched performance, and leading energy efficient design the DL380e Gen8 offers the perfect
solution for the dynamic compute and storage requirements of today's demanding datacenters.
Front View:
1. Quick removal access panel
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
Redundant Hot Plug Power Supplies(upgradeable
option)
Removable Riser Cage assembly
Up to 2 Intel E5-2400 Series Processors
Removable Hot Plug Fans modules, (optional, full N+1
redundancy)
Optical Disk Drive Bay
Health LED
Network activity LED
Power On /Standby button and system power LED
button
Unit ID LED
USB connectors
Hard Drive bays
12 DIMM slots: DDR3 Registered(RDIMM), Load
Reduced (LRDIMM) or Unbuffered(UDIMM) memory
Rear View:
1.
Riser board without SAS support: Slot1 PCIe3 x8 (4, 1);
Riser board with SAS support: Slot1 PCIe3 x16 (8, 4, 1)
2.
Slot2 PCIe3 x16 (8, 4, 1)
3.
4.
5.
Only for riser board without SAS support: Slot3 PCIe3 x8 (8
4, 1)
Slot4 PCIe2 x8 (4, 1)
Slot5 PCIe3 x16 (16, 8, 4, 1) (optional)
6.
7.
8.
9.
Slot6 PCIe3 x16 (8, 4, 1) (optional)
Power Supply bay1 (Primary Power Supply)
Power Supply bay 2 (Shown populated: optional)
Unit ID LED/Button
10.
11.
12.
13.
HP Ethernet 1Gb 4-port 366i Adapter (4 x 1GbE)
Service tool
Serial connector
Video connector
14.
15.
16.
USB connectors (2)
iLO connector
USB connectors (2)
DA - 14328 Worldwide QuickSpecs — Version 2 — 6/8/2012
Page 1
QuickSpecs
HP ProLiant DL380e Generation 8 (Gen8)
Standard Features
NOTE: For the Standard Features shipped in the "Factory Integrated Models", please see the "Configuration
Information - Factory Integrated Models" section.
Processor
Entry Processors
One of the following
NOTE: All support up to 1066MHz DDR3 memory speeds.
depending on Model
Intel® Xeon® E5-2407 (2.2GHz/4-core/10MB/6.4GT-s QPI/80W, DDR3-1066, HT)
Intel® Xeon® E5-2403 (1.8GHz/4-core/10MB/6.4GT-s QPI/80W, DDR3-1066, HT)
Base Processors
NOTE: All support up to1333MHz DDR3 memory speeds.
Intel® Xeon® E5-2440 (2.4GHz/6-core/15MB/7.2GT-s QPI/95W, DDR3-1333, HT, Turbo23/3/4/4/5/5)Turbo
Intel® Xeon® E5-2430 (2.2GHz/6-core/15MB/7.2GT-s QPI/95W, DDR3-1333, HT, Turbo23/3/4/4/5/5)Turbo
Intel® Xeon® E5-2430L (2.0GHz/6-core/15MB/7.2GT-s QPI/60W, DDR3-1333, HT, Turbo23/3/4/4/5/5)Turbo
Intel® Xeon® E5-2420 (1.9GHz/6-core/15MB/7.2GT-s QPI/95W, DDR3-1333, HT, Turbo23/3/4/4/5/5)Turbo
Performance Processors
NOTE: All support up to 1600MHz DDR3 memory speeds.
Intel® Xeon® E5-2470 (2.3GHz/8-core/20MB/8GT-s QPI/95W,DDR3-1600, HT, Turbo25/5/6/6/7/7/8/8)Turbo+
Intel® Xeon® E5-2450 (2.1GHz/8-core/20MB/8GT-s QPI/95W, DDR3-1600, HT, Turbo25/5/6/6/7/7/8/8)Turbo+
Intel® Xeon® E5-2450L (1.8GHz/8-core/20MB/8GT-s QPI/70W, DDR3-1600, HT, Turbo22/2/3/3/4/4/5/5)Turbo+
NOTE: HT indicates that the processor model supports Intel® Hyper-Threading Technology.
NOTE: Turbo2 indicates the maximum potential frequency increment when using Intel®
Turbo Boost Technology, with 8, 7, 6, 5, 4, 3, 2 and 1 cores active.
NOTE: DDR3 speed is the maximum memory speed of the processor. Actual memory speed
may depend on the quantity and type of DIMMs installed.
NOTE: Up to 2 processors supported. Mixing different processor models is not supported.
NOTE: For the Intel® C600 Chipset E5-2400 Series, the letter preceding the model number
indicates the Product Line (E3, E5, E7); 2400x v#, 2 = number of CPUs in a Node, 4 is
socket/segment designation, 00 = Processor SKU, x = L for low power SKUs and v# (not yet
designated) = version number.
Cache Memory
One of the following
depending on Model
20MB (1x20MB) Level 3
NOTE: For Eight-core processors.
15MB (1x15MB) Level 3
NOTE: For Six-core processors.
10MB (1x10MB) Level 3
NOTE: For Quad-core processors.
NOTE: All processor models above list the L3 Cache associated with that particular
processor.
Chipset
Intel® C600 Series Chipset
Intel® E5-2400 Processor Family
NOTE: For more information regarding Intel chipsets, please see the following URL:
http://www.intel.com/products/server/chipsets/.
DA - 14328 Worldwide QuickSpecs — Version 2 — 6/8/2012
Page 2
QuickSpecs
HP ProLiant DL380e Generation 8 (Gen8)
Standard Features
Upgradeability
Upgradeable to 2 processors (16 Cores)
Up to 12 DIMM slots available
NOTE: To take advantage of DIMMs 7-12, a second processor must be installed
10 Gigabit networking options via standup card
Optional 2 slot riser (x16, x8)
NOTE: To take advantage of the additional 2 PCI slot upgrade, a second processor must be
installed.
Redundant Power Supply
Redundant Fan
Optical Drive (8SFF/8LFF only)
On System
Management
Processor
HP iLO (Firmware: HP iLO 4)
Memory Protection
Advanced ECC
NOTE: For more information, visit: http://www.hp.com/go/ilo
Online Spare
Lock-step mode
Memory
One of the following
depending on Model
Type
HP SmartMemory
DDR3 Load Reduced (LRDIMM), Registered (RDIMM) or
Unbuffered (UDIMM)
DIMM Slots Available
12 (6 DIMM slots per processor, 3 channels per processor, 2
DIMMs per channel)
Standard (Entry Models - 4GB (1 x 4GB) Registered DIMMs PC3-10600R (1333MHz)
SATA)
Standard (Entry Models - 4GB (1 x 4GB) Registered DIMMs PC3-10600R (1333MHz)
SAS)
Standard (Base Models - 8GB (2 x 4GB) Registered DIMMs PC3-10600R (1333MHz)
LFF)
Standard (Base Models - 8GB (2 x 4GB) Registered DIMMs PC3-10600R (1333MHz)
SFF)
Standard (High
24GB (6 x 4GB) Registered DIMMs PC3-12800R (1333MHz)
Performance Models)
Standard (Storage
12GB (3 x 4GB) Registered DIMMs PC3-12800R (1333MHz)
Models - LFF)
Standard (Storage
12GB (3 x 4GB) Registered DIMMs PC3-12800R (1333MHz)
Models - SFF)
Maximum Capacity
384GB (12 x 32GB LRDIMM @1333MHz)
(LRDIMM)
Maximum Capacity
192GB (12 x 16GB RDIMM @1600MHz or 1333MHz)
(RDIMM)
Maximum Capacity
96GB (12 x 8GB UDIMM @1333MHz)
(UDIMM)
NOTE: HP memory from previous generation servers are not fully compatible with the HP
ProLiant DL380e Gen8 Server.
NOTE: To realize the performance memory capabilities listed in this document, HP
SmartMemory is required. For additional information, please see the HP SmartMemory
QuickSpecs at: http://h18000.www1.hp.com/products/quickspecs/14225_div/14225_div.html
NOTE: If only one processor is installed, only half the DIMM slots are available
DA - 14328 Worldwide QuickSpecs — Version 2 — 6/8/2012
Page 3
QuickSpecs
HP ProLiant DL380e Generation 8 (Gen8)
Standard Features
NOTE: UDIMM max DIMM population is 12
NOTE: Depending on the memory configuration and processor model, the memory speed
may run at 1600MHz, 1333MHz, or 1066MHz. Please see Memory Population Table or the
Online Memory Configuration Tool at: www.hp.com/go/ddr3memory-configurator.
Network Controller
Expansion Slots
Primary Riser
(Standard)
Primary Riser
(Riser with SAS)
Secondary Riser
(Optional)
The HP ProLiant DL380e Gen8 server offers the customer a quad-port NIC standard with the
option to upgrade with a variety of networking options.
HP Ethernet 1Gb 4-port 366i Adapter
Expansion
Slots #
1
Technology
PCIe Gen3.0
Bus
Width**
X4
Connector
Width
X8
Form Factor
Notes
Full Length,
Full Height
Slot
2
PCIe Gen3.0
X8
X16
Half Length,
Full Height
Slot
3
PCIe Gen3.0
X8
X8
Half Length,
Full Height
Slot
4
PCIe Gen2.0
X4
X8
Low Profile
** Indicates the number of physical electrical lanes running to the connector.
Expansion
Technology
Bus
Connector Form Factor
Notes
Slots #
Width**
Width
1
PCIe Gen3.0
X4
X8
Full Length,
Full Height
Slot
2
PCIe Gen3.0
X8
X16
Half Length,
Full Height
Slot
3
PCIe Gen3.0
NA
NA
NA
Not available
for Riser with
SAS
4
PCIe Gen2.0
X4
X8
Low Profile
** Indicates the number of physical electrical lanes running to the connector.
Expansion
Technology
Bus
Connector Form Factor
Notes
Slots #
Width**
Width
5
PCIe 3.0
X16
X16
Full length, full
height slot
6
PCIe 3.0
X8
X16
Half length, full
height slot
** Indicates the number of physical electrical lanes running to the connector.
NOTE: When populating slots on secondary riser (p/n 661628-B21), a second processor
must be installed.
NOTE: Slot 5 supports up to 225w PCIe cards. An additional Graphic Card Power Adapter
Kit is required (663282-B21). See Option Section below for offering.
DA - 14328 Worldwide QuickSpecs — Version 2 — 6/8/2012
Page 4
QuickSpecs
HP ProLiant DL380e Generation 8 (Gen8)
Standard Features
HP Server ROM
HP ROM (Read Only Memory) is now digitally signed using HP's Corporate Signing Service.
This signature is verified before the flash process starts, reducing accidental programming
and preventing malicious efforts to corrupt system ROM.
HP ROM provides for essential initialization and validation of hardware components before
control is passed to the customer-installed operating system. The ROM also provides the
capability of booting from various fixed media (HDD, CD-ROM) and removable media (USB),
to continue operation to the operating system.
HP ROM performs very early configuration of the video controller, to allow monitoring of
initialization progress via an attached monitor. If configuration or hardware errors are
discovered during this early phase of hardware initialization, suitable messages are now
displayed on the connected monitor. Additionally, these configuration or hardware errors are
logged to the Integrated Management Log (IML) to assist in diagnosis.
HP's ProLiant ROM is used to configure the following:
Processor and chipset status registers
System memory, memory map, and memory initialization
System hardware configuration (Integrated PCI devices and optional PCIe cards).
Customer-specific BIOS configuration (using the HP ROM-Based Setup Utility (RBSU).
NOTE: For further information, please refer to HP's RBSU (ROM based setup utility) user
guide: www.hp.com/support/rbsu.
Storage Controller
One of the following
depending on Model
Entry Model - SATA
Entry Model - SAS
Base Models - LFF
Base Model - SFF
High Performance
Models
Storage Models - LFF
Storage Models - SFF
HP Dynamic Smart Array B120i Controller
NOTE: Provides support for up to 6 SATA drives and data
transmission speeds up to 3Gb/s
HP Dynamic Smart Array B320i/512MB FBWC Controller
NOTE: Provides support for up to 8 SAS/SATA drives, data
transmission speeds up to 6Gb/s and includes SAS license key.
HP Dynamic Smart Array B320i/512MB FBWC Controller
NOTE: Provides support for up to 8 SAS/SATA drives, data
transmission speeds up to 6Gb/s and includes SAS license key.
HP Dynamic Smart Array B320i/512MB FBWC Controller
NOTE: Provides support for up to 8 SAS/SATA drives, data
transmission speeds up to 6Gb/s and includes SAS license key.
HP Smart Array P420i/1GB FBWC Controller (RAID 0/1/1+0/5/5+0)
HP Smart Array P420i/1GB FBWC Controller (RAID 0/1/1+0/5/5+0)
HP Smart Array P420i/2GB FBWC Controller (RAID 0/1/1+0/5/5+0)
DA - 14328 Worldwide QuickSpecs — Version 2 — 6/8/2012
Page 5
QuickSpecs
HP ProLiant DL380e Generation 8 (Gen8)
Standard Features
Internal Storage
Devices
One of the following
depending on Model
Diskette Drive
Optical Drive
Hard Drives
Drive Bays
Maximum Internal
Storage
None
Optional
DVD-ROM, DVD-RW
NOTE: This option available with all 8SFF or 8LFF drive bay models.
None ship standard
8 SFF drive bays total with Optical Bay
Optional: +8SFF drive bay (total of 16SFF drive bays)
NOTE: The Optical Drive bay is not available with +8SFF drive bay
optional upgrade.
8 LFF drive bays total with Optical Bay
12 LFF drive bays total without Optical Bay
Optional: +2 Rear Drive Bays (LFF or SFF)
25 SFF drive bays total without Optical Bay
Optional: +2 Rear Drive Bays (LFF or SFF)
NOTE: Drive cage changes are not supported except for adding
+8SFF to an existing 8SFF drive cage.
NOTE: All Pre-configured Models come populated with some hard
drive blanks installed. Should the customer need additional hard
drive blanks, they can order more using either P/N 666987-B21: HP
SFF Gen8 Hard Drive Blank Kit or P/N 666986-B21: HP LFF Gen8
Hard Drive Blank Kit. These part numbers for single HDD blanks
below are also provided should the customer require replacement
HDD blanks for their server.
Hot Plug SFF SAS
27.0 TB
Hot Plug SFF SATA
27.0 TB
Hot Plug LFF SAS
42.0 TB
Hot Plug LFF SATA
42.0 TB
Hot Plug SFF SAS SSD 21.6 TB
Interfaces
27 x 1TB (with 25SFF drive cage + Rear
2SFF drive cage)
27 x 1TB (with 25SFF drive cage + Rear
2SFF drive cage)
14 x 3TB (with 12LFF drive cage + Rear
2LFF drive cage)
14 x 3TB (with 12LFF drive cage + Rear
2LFF drive cage)
27 x 800GB (with 25SFF drive cage + Rear
2SFF drive cage)
27 x 400GB (with 25SFF drive cage + Rear
2SFF drive cage)
14 x 400GB (with 12LFF drive cage + Rear
2LFF drive cage)
Hot Plug SFF SATA
SSD
Hot Plug LFF SATA
SSD
10.8 TB
Serial
Video
LOM Network Ports
HP iLO Remote
Management Network
Port
SD slot
USB 2.0 Ports
1
2 (1 front, 1 back) not active simultaneously
4x1GbE ports
1 Gb Dedicated
5.6 TB
1 Internal Secure
Up to 7 total: up to 2 front, 4 back, 1 internal (secure)
NOTE: 12LFF and 25SFF drive cage models have 1front, 4 back
and 1 internal USB ports.
DA - 14328 Worldwide QuickSpecs — Version 2 — 6/8/2012
Page 6
QuickSpecs
HP ProLiant DL380e Generation 8 (Gen8)
Standard Features
Industry Standard
Compliance
ACPI 2.0b Compliant
PCIe 3.0 Compliant
PXE Support
WOL Support
Microsoft® Logo certifications
USB 2.0 Compliant
Server Power Cords
High voltage power cord ships standard with all part numbers.
NOTE: HP ProLiant DL servers no longer ship standard with a 12-foot NEMA 5-15P to C13
power cords (227099-001) that allow connection to 110V US wall outlets in a home or office.
ProLiant DL servers are primarily connected to PDU's in data center racks so they now ship
standard with only a PDU 6-foot C-14 to C13 power cord (142258-001). If a user wishes to
power a ProLiant DL server using a110V receptacle (NEMA-15), the 12-foot NEMA 5-15 to
C13 power cord must be ordered separately. Also available: 110 volt 6-Foot NEMA 5-15p to
C13 (AF556A).
Power Specifications To review typical system power ratings use the HP Power Advisor which is available via the
online tool located at URL: www.hp.com/go/proliant-energy-efficient or
www.hp.com/go/hppoweradvisor.
NOTE: Power Specification and Technical Content for supported power supplies can be
found at: http://h18000.www1.hp.com/products/quickspecs/14209_div/14209_div.html
Common Slot Power HP's Common Slot (CS) power supplies allow for commonality of power supplies across a
Supply
wide range of ProLiant and Integrity servers, as well as HP Storage solutions, and are
designed to provide the highest power supply efficiency without degrading system
performance. HP CS power supplies are tested by the Electric Power Research Institute
(EPRI) and certified through the ECOS 80 Plus power supply program. HP CS power supply
options provide efficiency ratings of up to 94% (80 Plus Platinum) and are available in three
power output options - 460W, 750W, and 1200W - allowing the customer to "right-size" a
power supply for their specific server configuration. All HP Common Slot power sources are
UL, CE Mark Compliant, hot-plug and support redundant configurations.
NOTE: Mixing of power supplies in the same server is not supported. All power supplies must
be of the same output and efficiency rating. If non-matched power supplies are inserted you
will get errors and operation will fail.
HP CS Platinum Plus power supplies are required when enabling HP's Power Discovery
Services. a solution that creates an automated, energy-aware network between IT systems
and facilities. This allows your company to reclaim millions of dollars in wasted power
capacity and downtime costs across data centers. For more information on HP's Power
Discovery Services, go to: www.hp.com/go/ipd.
It is highly recommended that you use the HP Power Advisor in defining the "Right-Size"
power supply for your needs. HP Power Advisor can be accessed at:
www.hp.com/go/hppoweradvisor.
NOTE: The 80 PLUS program is a unique forum that unites electric utilities, the computer
industry, and consumers in an effort to bring energy efficient technology solutions to the
marketplace. 80 Plus independently tests power supply efficiency and publicly posts the
results on www.80Plus.org.
Redundant Power: Optional (1+ 1) power supplies can be purchased through power supply
option kits (see Power Supplies for part numbers).
NOTE: Power Specification and Technical Content for supported power supplies can be
DA - 14328 Worldwide QuickSpecs — Version 2 — 6/8/2012
Page 7
QuickSpecs
HP ProLiant DL380e Generation 8 (Gen8)
Standard Features
found at: http://h18000.www1.hp.com/products/quickspecs/14209_div/14209_div.html
System Fans
One of the following
depending on Model
4 Hot-Plug Non-redundant Fans ship standard in 1P Models
1P: 4 fans - non-redundancy
1P: 5 fans - redundancy
6 Hot-plug Redundant Fans ship standard in 2P Models
2P: 5 fans - non-redundancy
2P: 6 fans - redundancy
NOTE: Customers may separately purchase redundant fans with the 667855-B21 option kit.
Additional fans to support redundancy are also included in -B21 processor option kits when
upgrading from one processor to two processor.
Required Cabling
For required cabling information, refer to the HP Web site at: www.hp.com/servers/dl380egen8.
Operating Systems
and Virtualization
Software Support for
ProLiant Servers
Microsoft Windows Server
Red Hat Enterprise Linux (RHEL)
SUSE Linux Enterprise Server (SLES)
Oracle Solaris
VMware
NOTE: For more information on HP's Certified and Supported ProLiant Servers for OS and
Virtualization Software and latest listing of software drivers available for your server, please
visit our Support Matrix at: http://www.hp.com/go/ossupport and our driver download page
http://www.hp.com/support/DL380eGen8
Graphics
Integrated Matrox G200 video standard
1280 x 1024 (32 bpp)
1920 x 1200 (16 bpp)
Form Factor
One of the following
depending on Model
2U Rack form factor
Entry models ship with fixed rails.
All other models ship with sliding rails and cable management system.
8 SFF Drive Bay Version:
3.44 (8.75 cm) Height x 17.54" (44.55 cm) Width x 27.5" (69.85 cm) Length
8 LFF Drive Bay Version:
3.44 (8.75cm) Height x 17.54" (44.55 cm) Width x 29.5" (74.94cm) Length
12 LFF Drive Bay Version:
3.44 (8.75cm) Height x 17.54" (44.55 cm) Width x 29.5" (74.94cm) Length
25 SFF Drive Bay Version:
3.44 (8.75 cm) Height x 17.54" (44.55 cm) Width x 27.5" (69.85 cm) Length
DA - 14328 Worldwide QuickSpecs — Version 2 — 6/8/2012
Page 8
QuickSpecs
HP ProLiant DL380e Generation 8 (Gen8)
Standard Features
On System
Management
HP iLO Management
Engine
HP iLO Management Engine is a complete set of embedded
management features supporting the complete lifecycle of the
server, from initial deployment, through ongoing management, to
service alerting and remote support. HP iLO Management Engine
comes standard on all HP ProLiant Gen8 Servers. HP iLO
Management Engine portfolio includes:
HP iLO: The HP iLO management processor is the core
foundation for HP iLO Management Engine. HP iLO for HP
ProLiant servers simplify server setup, engage health
monitoring, power and thermal control, and promote remote
administration for HP ProLiant ML, DL, BL and SL servers.
Furthermore with the new HP iLO is the ability to access,
deploy, and manage your server anytime from anywhere with
your Smartphone device.
HP Agentless Management: With HP iLO Management
Engine in every HP ProLiant Gen8 server, the base hardware
monitoring and alerting capability is built into the system
(running on the HP iLO chipset) and starts working the
moment that a power cord and an Ethernet cable is connected
to the server.
HP Active Health System: HP Active Health System is an
essential component of the HP iLO Management Engine. It
provides: Diagnostics tools/scanners wrapped into one;
Always on, continuous monitoring for increased stability and
shorter downtimes; Rich configuration history; Health and
service alerts; Easy export and upload to Service and Support.
HP Intelligent Provisioning (previously known as
SmartStart): HP Intelligent Provisioning offers the ability for
out-of-the box single-server deployment and configuration
without the need for media.
NOTE: For more information, visit: http://www.hp.com/go/ilo
HP Insight
HP Service Pack for
management softwareProLiant (SPP)
HP Service Pack for ProLiant (SPP) and HP Smart Update Manager
(HP SUM) version 5 provide a new, comprehensive approach to
firmware and system software maintenance. Together they provide
better operating stability and ensure maximum uptime. The SPP will
be updated at a predictable cadence, typically coinciding with new
HP server hardware launches. By enabling all firmware to be
updated online and integrating firmware and system software
updates in one operation HP SUM and the SPP offer faster updates
of individual servers and dramatically faster updates of entire
BladeSystem enclosures. Further improving system uptime and
stability is the fact that HP provides 12 months of support on each
Service Pack for ProLiant.
The user experience around HP SUM and the SPP has been
improved in several ways, starting with the web download. A single
web page provides access to a single download containing both the
latest version of HP SUM version 5 and the latest SPP. Optional
smaller subsets with only specific types of servers or specific
operating systems are offered to save on download time. The HP
SUM application has been re-written to provide a more
straightforward, intuitive user interface that guides the user through
the steps of discovery, analyses and update, providing
comprehensive information on available updates, criticality and
DA - 14328 Worldwide QuickSpecs — Version 2 — 6/8/2012
Page 9
QuickSpecs
HP ProLiant DL380e Generation 8 (Gen8)
Standard Features
interdependencies. This information is also available in reports. By
providing the option of multiple local or shared repositories which
can be easily updated from hp.com, HP SUM provides the tools to
optimize stability and consistency throughout the company. While
HP SUM and the SPP will recommend the combinations of firmware
and system software that HP has found to be the best practice, the
application gives customers the flexibility to set their own specific
baseline.
The Service Pack for ProLiant has been rigorously tested with
specific attention for interaction between firmware, drivers and
agents both within the server as well as in interaction with the
BladeSystem enclosure components (Onboard Administrator and
Virtual Connect). This testing ensures the highest quality as well as
providing the input for HP SUM to deploy updates taking into
account all interdepencies, when determining the correct updates
and order of update deployment.
NOTE: The Service Pack for ProLiant (which includes HP SUM 5)
can be downloaded from www.hp.com/go/spp/download. More
information can be found: www.hp.com/go/spp and
http://www.hp.com/go/hpsum
HP Insight
HP Service Pack for
management softwareProLiant (SPP)
HP Service Pack for ProLiant (SPP) and HP Smart Update Manager
(HP SUM) version 5 provide a new, comprehensive approach to
firmware and system software maintenance. Together they provide
better operating stability and ensure maximum uptime. The SPP will
be updated at a predictable cadence, typically coinciding with new
HP server hardware launches. By enabling all firmware to be
updated online and integrating firmware and system software
updates in one operation HP SUM and the SPP offer faster updates
of individual servers and dramatically faster updates of entire
BladeSystem enclosures. Further improving system uptime and
stability is the fact that HP provides 12 months of support on each
Service Pack for ProLiant.
The user experience around HP SUM and the SPP has been
improved in several ways, starting with the web download. A single
web page provides access to a single download containing both the
latest version of HP SUM version 5 and the latest SPP. Optional
smaller subsets with only specific types of servers or specific
operating systems are offered to save on download time. The HP
SUM application has been re-written to provide a more
straightforward, intuitive user interface that guides the user through
the steps of discovery, analyses and update, providing
comprehensive information on available updates, criticality and
interdependencies. This information is also available in reports. By
providing the option of multiple local or shared repositories which
can be easily updated from hp.com, HP SUM provides the tools to
optimize stability and consistency throughout the company. While
HP SUM and the SPP will recommend the combinations of firmware
and system software that HP has found to be the best practice, the
application gives customers the flexibility to set their own specific
baseline.
The Service Pack for ProLiant has been rigorously tested with
specific attention for interaction between firmware, drivers and
agents both within the server as well as in interaction with the
DA - 14328 Worldwide QuickSpecs — Version 2 — 6/8/2012
Page 10
QuickSpecs
HP ProLiant DL380e Generation 8 (Gen8)
Standard Features
BladeSystem enclosure components (Onboard Administrator and
Virtual Connect). This testing ensures the highest quality as well as
providing the input for HP SUM to deploy updates taking into
account all interdepencies, when determining the correct updates
and order of update deployment.
NOTE: The Service Pack for ProLiant (which includes HP SUM 5)
can be downloaded from www.hp.com/go/spp/download. More
information can be found: www.hp.com/go/spp and
http://www.hp.com/go/hpsum
HP Insight
HP Service Pack for
management softwareProLiant (SPP)
HP Service Pack for ProLiant (SPP) and HP Smart Update Manager
(HP SUM) version 5 provide a new, comprehensive approach to
firmware and system software maintenance. Together they provide
better operating stability and ensure maximum uptime. The SPP will
be updated at a predictable cadence, typically coinciding with new
HP server hardware launches. By enabling all firmware to be
updated online and integrating firmware and system software
updates in one operation HP SUM and the SPP offer faster updates
of individual servers and dramatically faster updates of entire
BladeSystem enclosures. Further improving system uptime and
stability is the fact that HP provides 12 months of support on each
Service Pack for ProLiant.
The user experience around HP SUM and the SPP has been
improved in several ways, starting with the web download. A single
web page provides access to a single download containing both the
latest version of HP SUM version 5 and the latest SPP. Optional
smaller subsets with only specific types of servers or specific
operating systems are offered to save on download time. The HP
SUM application has been re-written to provide a more
straightforward, intuitive user interface that guides the user through
the steps of discovery, analyses and update, providing
comprehensive information on available updates, criticality and
interdependencies. This information is also available in reports. By
providing the option of multiple local or shared repositories which
can be easily updated from hp.com, HP SUM provides the tools to
optimize stability and consistency throughout the company. While
HP SUM and the SPP will recommend the combinations of firmware
and system software that HP has found to be the best practice, the
application gives customers the flexibility to set their own specific
baseline.
The Service Pack for ProLiant has been rigorously tested with
specific attention for interaction between firmware, drivers and
agents both within the server as well as in interaction with the
BladeSystem enclosure components (Onboard Administrator and
Virtual Connect). This testing ensures the highest quality as well as
providing the input for HP SUM to deploy updates taking into
account all interdepencies, when determining the correct updates
and order of update deployment.
NOTE: The Service Pack for ProLiant (which includes HP SUM 5)
can be downloaded from www.hp.com/go/spp/download. More
information can be found: www.hp.com/go/spp and
http://www.hp.com/go/hpsum
DA - 14328 Worldwide QuickSpecs — Version 2 — 6/8/2012
Page 11
QuickSpecs
HP ProLiant DL380e Generation 8 (Gen8)
Standard Features
Security
Warranty
Power-on password
Serial interface control
Administrator's password
This product is covered by a global limited warranty and supported by HP Services and a
worldwide network of HP Authorized Channel Partners resellers. Hardware diagnostic support and
repair is available for three years from date of purchase. Support for software and initial setup is
available for 90 days from date of purchase. Enhancements to warranty services are available
through HP Care Pack services or customized service agreements. Hard drives have either a one
year or three year warranty; refer to the specific hard drive QuickSpecs for details.
NOTE: Server Warranty includes 3-Year Parts, 1-Year Labor, 1-Year Onsite support with next
business day response. Warranty repairs may be accomplished through the use of Customer Self
Repair (CSR) parts. These parts fall into two categories: 1) Mandatory CSR parts are designed for
easy replacement. A travel and labor charge will result when customers decline to replace a
Mandatory CSR part; 2) Optional CSR parts are also designed for easy replacement but may
involve added complexity. Customers may choose to have HP replace Optional CSR parts at no
charge. Additional information regarding worldwide limited warranty and technical support is
available at: http://h18004.www1.hp.com/products/servers/platforms/warranty/index.html
DA - 14328 Worldwide QuickSpecs — Version 2 — 6/8/2012
Page 12
QuickSpecs
HP ProLiant DL380e Generation 8 (Gen8)
Optional Features
HP Insight
HP Insight Control
management software
HP Insight Control, a product option, delivers essential infrastructure
management that can help save time and money by making it easy
to deploy, migrate, monitor, remote control, and optimize your IT
infrastructure through a single, simple management console.
Two versions of Insight Control are available, to serve environments
requiring either a Linux-based or a Windows-based central
management server: HP Insight Control for Linux, and HP Insight
Control. See www.hp.com/go/insightcontrol
HP Matrix Operating
Environment
HP Insight Control includes one year of 24 x 7 HP Software
Technical Support and Update Service ensuring rapid access to HP
support staff and proactive delivery of software updates. For more
information about this service, please visit:
http://www.hp.com/services/insight.
The HP Matrix Operating Environment (Matrix OE) for ProLiant and
Integrity servers is an integrated command center that helps you
instantly adjust to dynamic business demands. This advanced
infrastructure management software lets you reduce the cost of
common data center tasks by up to 40 percent while keeping pace
with your changing business.
The HP Matrix OE includes the automated provisioning,
optimization, and recovery management capabilities for HP
CloudSystem Matrix, the ideal platform for private cloud and
Infrastructure as a Service (IaaS).
HP iLO Advanced
License for ProLiant
Servers
NOTE: For more information, visit: http://www.hp.com/go/matrixoe
HP iLO management processors for HP ProLiant Gen8 servers
virtualizes system controls to help simplify server setup, engage
health monitoring and power and thermal control, and promote
remote administration. HP iLO functions out-of-the-box without
additional software installation and functions regardless of the
servers' state of operation. Basic system board management
functions, diagnostics, and essential Lights-Out functionality ships
standard across all HP ProLiant Gen8 rack, tower and blade
servers. The HP iLO can be accessed from any location via a web
browser and works hand-in-hand with HP Systems Insight Manager,
Insight Control, and Insight Dynamics, helping customers unleash
the value of the ProLiant platform and deliver the highest possible
quality of IT service to the business.
Advanced functionality, such as graphical remote console, multi-user
collaboration, and video record/playback can be activated with the
optional HP iLO Advanced or HP iLO Advanced for BladeSystem
licenses. The Advanced licensed features offer sophisticated remote
administration of servers in dynamic data center and remote
locations and can help significantly reduce cost associated with ITrelated travel and unplanned downtime.
NOTE: For more information, visit: http://www.hp.com/go/ilo
DA - 14328 Worldwide QuickSpecs — Version 2 — 6/8/2012
Page 13
QuickSpecs
HP ProLiant DL380e Generation 8 (Gen8)
Optional Features
High Performance
Clusters
HP Cluster Platforms
HP Cluster Platforms are specifically engineered, factory-integrated
large-scale ProLiant clusters optimized for High Performance
Computing, with a choice of servers, networks and software.
Operating system options include specially priced offerings for Red
Hat Enterprise Linux and SUSE Linux Enterprise Server, as well as
Microsoft Windows HPC Server. A Cluster Platform Configurator
simplifies ordering. http://www.hp.com/go/clusters
HP HPC Interconnects High Performance Computing (HPC) interconnect technologies are
available for this server as part of the HP Cluster Platform portfolio.
These high-speed InfiniBand and Gigabit interconnects are fully
supported by HP when integrated within an HP cluster. Flexible,
validated solutions can be defined with the help of configuration
tools. http://www.hp.com/techservers/clusters/ucp/index.html
HP Insight Cluster
HP Insight Cluster Management Utility (CMU) is an HP-licensed and
Management Utility
HP-supported suite of tools that are used for lifecycle management
of hyperscale clusters of Linux ProLiant systems. CMU includes
software for the centralized provisioning, management and
monitoring of nodes. CMU makes the administration of clusters user
friendly, efficient, and effective. http://www.hp.com/go/cmu
HP HPC Linux Value
Pack
HP HPC Linux Value Pack (Value Pack) is an HP-licensed and HPsupported option to HP Insight CMU, for the development and
deployment of applications on HPC Cluster Platforms. Value Pack
includes the Platform LSF workload scheduler and Platform
Application Center, as well as the HP-MPI parallelization library. HP
HPC Linux Value Pack
HP Insight Online
HP Insight Online is a new addition to the HP Support Center for one stop, secure access to
product and HP support information personalized to your IT environment. Insight Online can
automatically display devices remotely monitored by HP Insight Remote Support. With Insight
Online's easy navigation you can efficiently track your IT support contracts and device status
from anywhere and at anytime. www.hp.com/go/insightonline
Factory Express
Portfolio for Servers
and Storage
HP Factory Express offers configuration, customization, integration and deployment services
for HP servers and storage products. Customers can choose how their factory solutions are
built, tested, integrated, shipped and deployed.
Factory Express offers service packages for simple configuration, racking, installation,
complex configuration and design services as well as individual factory services, such as
image loading, asset tagging, and custom packaging. HP products supported through
Factory Express include a wide array of servers and storage: HP Integrity, HP ProLiant, HP
ProLiant Server Blades, HP BladeSystem, HP 9000 servers as well as the MSAxxxx,
EVA7xxx, EVA, XP, rackable tape libraries and configurable network switches.
For more information on Factory Express services for your specific server model please
contact your sales representative or go to: http://www.hp.com/go/factory-express.
HP Enterprise
Configurator
The HP eConfigure-Enterprise Configurator now provides factory default racking for our HP
hardware portfolio. This approach is aligned with our strategic direction to meet the needs and
expectations of our valued customers. If you require "custom" rack configuration, please contact
HP's Customer Business Center or an Authorized Partner for assistance.
http://www.hp.com/products/configurator.
DA - 14328 Worldwide QuickSpecs — Version 2 — 6/8/2012
Page 14
QuickSpecs
HP ProLiant DL380e Generation 8 (Gen8)
Service and Support
Service and Support HP Technology Services for Industry Standard Servers and BladeSystem
Capitalizing on HP ProLiant server and HP BladeSystem capabilities requires a service
partner who understands your increasingly complex business technology environment. That's
why it makes sense to team up with the people who know HP infrastructure hardware and
software best - the experienced professionals at HP Services.
What HP ProLiant and BladeSystem Services can do for you
HP ProLiant and BladeSystem Services can help you design, deploy, test, integrate, support,
and manage IT and infrastructure solutions. This way, HP proposes services solutions that
include more than just uplift of base warranty. Foundation Care services deliver scalable
support-packages for HP industry-standard servers and software. You can choose the type
and level of service that is most suitable for their business needs. New to this portfolio is HP
Collaborative Support. If you are running business critical environments, HP offers Proactive
Care or Critical Advantage. These services help deliver high levels of application availability
through proactive service management and advanced technical response
You can get the support you need by choosing from one of a number of service packaged
solutions we have designed to address wider set of customer support needs.
HP Technology Services meets business challenges with services offered in three support
recommendations - Optimized Care, Standard Care, and Basic Care - available for each
product group. Such support solutions enable customers to optimize technology operations,
minimize risk and drive better business outcomes with easy-to-buy, easy-to-use scalable
support recommendations for servers, storage, networking and software designed to meet
your specific needs.
All three service recommendations include support services from the broader portfolio of
Foundation Care and Proactive Care services.
Optimized Care
Optimized Care: Supports maintaining servers at optimum performance availability
HP ProLiant Server Hardware Installation
Provides for the basic hardware installation of HP branded servers, storage devices and
networking options to assist you in bringing your new hardware into operation in a timely and
professional manner http://h20195.www2.hp.com/V2/GetPDF.aspx/5981-9356EN.pdf
HP Installation and Startup for Insight Control Software / HP SIM
Provides for the deployment and basic configuration of HP Insight Control or HP SIM
(Systems Insight Manager) on HP ProLiant ML and DL series servers or HP BladeSystem
servers http://h20195.www2.hp.com/v2/GetPDF.aspx/4AA0-9972ENW.pdf
3-Year HP 24x7 4 hour Response, Proactive Care
Helps optimize your systems and delivers high levels of application availability through
proactive service management and advanced technical response. A skilled Technical
Manager will own your call and end to end until resolved, delivering a single point of contact
for you. Helping you to resolve your hardware and software issues and minimizing downtime
in your business critical environment.
Additional Services: Factory Express, Education Services, Proactive Select - 30 Credit
Package
DA - 14328 Worldwide QuickSpecs — Version 2 — 6/8/2012
Page 15
QuickSpecs
HP ProLiant DL380e Generation 8 (Gen8)
Service and Support
Standard Care
Standard Care: Service recommendation that maintains high level of server availability
HP ProLiant Server Hardware Installation
Provides for the basic hardware installation of HP branded servers, storage devices and
networking options to assist you in bringing your new hardware into operation in a timely and
professional manner http://h20195.www2.hp.com/V2/GetPDF.aspx/5981-9356EN.pdf
HP Installation and Startup for Insight Control Software / HP SIM
Provides for the deployment and basic configuration of HP Insight Control or HP SIM
(Systems Insight Manager) on HP ProLiant ML and DL series servers or HP BladeSystem
servers http://h20195.www2.hp.com/v2/GetPDF.aspx/4AA0-9972ENW.pdf
3-Year HP 24x7 4 hour Response, Collaborative Support
Provides problem resolution support across the stack of HW, firmware, and HP and 3rd party
SW. In case the issue is with 3rd party SW, HP does known issue resolution. If HP cannot
solve the issue, it will contact the third-party vendor and create a problem incident on your
behalf.
http://h20195.www2.hp.com/V2/GetPDF.aspx/4AA3-8232ENW.pdf
Additional Services: Software support service with 24X7 availability with a 2 hour response,
Training courses on Microsoft, Linux (Red Hat and SUSE), VMware, and HP Insight
Software, 10 Proactive Select Credit package, Factory Express
http://www8.hp.com/us/en/business-services/it-services.html?compURI=1078865
Basic Care
Basic Care: delivers minimum recommended support service level
HP ProLiant Server Hardware Installation
Provides for the basic hardware installation of HP branded servers, storage devices and
networking options to assist you in bringing your new hardware into operation in a timely and
professional manner http://h20195.www2.hp.com/V2/GetPDF.aspx/5981-9356EN.pdf
3-Year HP 24x7 4 hour Response, Hardware Support Onsite Service
Provides you with rapid remote support and if required an HP authorized technical engineer
will be on site 24X7 begin hardware maintenance service within 4 hours of the service
request being logged
http://h20195.www2.hp.com/V2/GetPDF.aspx/5982-6547EEE.pdf
3-Year , HP 24x7 Software Support for Insight Control
Provides remote 3-year software support service that delivers comprehensive software
services, including access to HP technical resources and software updates
http://h20195.www2.hp.com/V2/GetPDF.aspx/5981-6645EEE.pdf
Additional Services: Factory Express, Education Services, Proactive Select - 10 Credits
Insight Remote
Support
Provides 24 X 7 remote monitoring, proactive notifications, and problem resolution. Learn
more http://www.hp.com/go/insightremotesupport
DA - 14328 Worldwide QuickSpecs — Version 2 — 6/8/2012
Page 16
QuickSpecs
HP ProLiant DL380e Generation 8 (Gen8)
Service and Support
HP Support Center
Personalized online support portal with access to information, tools and experts to support
HP business products. Submit support cases online, chat with HP experts, access support
resources or collaborate with peers. Learn more http://www.hp.com/go/hpsc
HP's Support Center Mobile App* allows you to resolve issues yourself or quickly connect to
an agent for live support. Now, you can get access to personalized IT support anywhere,
anytime.
HP Insight Remote Support and HP Support Center are available at no additional cost with a
HP warranty, HP Care Pack or HP contractual support agreement.
*HP' Support Center Mobile App is subject to local availability
Warranty / Service
Coverage
For ProLiant servers and storage systems, the services cover HP-branded hardware options
qualified for the server, purchased at the same time or afterward, internal to the enclosure, as
well as external monitors up to 22" and tower UPS products; these items will be covered at
the same service level and for the same coverage period as the server unless the maximum
supported lifetime and/or the maximum usage limitation has been exceeded. Coverage of the
UPS battery is not included; standard warranty terms and conditions apply.
The defective media retention service feature option applies only to Disk or eligible
SSD/Flash Drives replaced by HP due to malfunction. It does not apply to any exchange of
Disk or SSD/Flash Drives that have not failed. SSD/Flash Drives that are specified by HP as
consumable parts and/or that have exceeded maximum supported lifetime and/or the
maximum usage limit as set forth in the manufacturer's operating manual or the technical
data sheet are not eligible for the defective media retention service feature option.
For more information To learn more on HP ProLiant servers and HP BladeSystem servers, please contact your HP
sales representative or HP Authorized Channel Partner. Or visit:
http://www.hp.com/services/proliant
DA - 14328 Worldwide QuickSpecs — Version 2 — 6/8/2012
Page 17
QuickSpecs
HP ProLiant DL380e Generation 8 (Gen8)
Pre-configured Models
NOTE: For the Standard Features shipped in the "Factory Integrated Models", please see the "Configuration
Information - Factory Integrated Models" section.
NOTE: Pre-configured models ship with the configurations below. Options can be selected from the Core or Additional
options section of this QuickSpecs.
NOTE: HP does not allow factory integration of options into pre-configured models. Any additional options purchased
will be shipped separately.
NOTE: If you desire a custom configuration please see "Configuration Information - Factory Integrated Models"
section of this QuickSpecs.
NOTE: All Pre-configured Models come populated with some hard drive blanks installed. Should the customer need
additional hard drive blanks, they can order more using either P/N 666987-B21: HP SFF Gen8 Hard Drive Blank Kit or
P/N 666986-B21: HP LFF Gen8 Hard Drive Blank Kit.
NOTE: Not all models are available in all regions. Check with your local country HP offices for availability.
Entry Models - SATA
Quad-Core SATA
Model HP ProLiant
DL380e Gen8 E5-2403
1P 4GB-R Hot Plug 4
LFF 460W PS Entry
Server
648255-xx1
Processor(s)
Cache Memory
Memory
Network Controller
Storage Controller
Hard Drive
Internal Storage
Optical Drive Bay
PCI-Express Slots
Power Supply
Fans
Management
Form Factor
Warranty
(1) Intel® Xeon® E5-2403 (1.8GHz/4-core/10MB/6.4GT-s QPI/80W,
DDR3-1066, HT) Processor
10MB (1x10MB) Level 3
4GB (1 x 4GB) Registered DIMMs PC3-10600R (1333MHz)
NOTE: Memory runs at 1066MHz speed due to processor.
HP Ethernet 1Gb 4-port 366i Adapter
HP Dynamic Smart Array B120i Controller
NOTE: Provides support for up to 6 SATA drives and data
transmission speeds up to 3Gb/s Greater than 4 drives requires an
additional cable (see p/n 675856-B21)
None ship standard; includes 7 LFF hard drive blanks
NOTE: This model comes with 7 HDD blanks if no HDD is ordered.
8 LFF HDD Bays
1; (Optional: DVD-ROM, DVD-RW)
4 standard (1-FL/FH, 2-HL/FH, 1-LP)
(1) HP 460W CS Gold Hot Plug Power Supply (92% Efficient)
4 Hot-Plug Non-redundant Fans
NOTE: Customers can upgrade to a redundant fan configuration
with the purchase of an option kit (see p/n 667855-B21)
HP iLO Management Engine (standard)
Optional: HP Insight Control
Rack (2U)
NOTE: This model has friction rails and does not support in-rack
serviceability.
NOTE: Includes Rack Mounting Gen8 non-telescoping Friction Rail
Kit which does not allow for in rack serviceability. The HP 2U Gen8
Cable Management Arm is not available when using Friction Rails.
Caution: HP recommends that a minimum of two people is required
for all Rack Server installations. Please refer to your installation
instructions for proper tools and number of people to use for any
installation.
Server Warranty includes 3-Year Parts, 1-Year Labor, 1-Year Onsite
support with next business day response.
DA - 14328 Worldwide QuickSpecs — Version 2 — 6/8/2012
Page 18
QuickSpecs
HP ProLiant DL380e Generation 8 (Gen8)
Pre-configured Models
Entry Models - SAS
Quad-Core SAS ModelProcessor(s)
HP ProLiant DL380e
Gen8 E5-2403 1P
Cache Memory
4GB-R Hot Plug 8 SFF
Memory
460W PS Entry Server
648256-xx1
Network Controller
Storage Controller
Hard Drive
Internal Storage
Optical Drive Bay
PCI-Express Slots
Power Supply
Fans
Management
Form Factor
Warranty
(1) Intel® Xeon® E5-2403 (1.8GHz/4-core/10MB/6.4GT-s QPI/80W,
DDR3-1066, HT) Processor
10MB (1x10MB) Level 3
4GB (1 x 4GB) Registered DIMMs PC3-10600R (1333MHz)
NOTE: Memory runs at 1066MHz speed due to processor.
HP Ethernet 1Gb 4-port 366i Adapter
HP Dynamic Smart Array B320i Controller
None ship standard; includes 7 SFF hard drive blanks
NOTE: This model comes with 7 HDD blanks if no HDD is ordered.
8 SFF HDD Bays
1; (Optional: DVD-ROM, DVD-RW)
3 standard (1-FL/FH, 1HL/FH, 1-LP)
(1) HP 460W CS Gold Hot Plug Power Supply (92% Efficient)
4 Hot-Plug Non-redundant Fans
NOTE: Customers can upgrade to a redundant fan configuration
with the purchase of an option kit (see p/n 667855-B21)
HP iLO Management Engine (standard)
Optional: HP Insight Control
Rack (2U)
NOTE: This model has friction rails and does not support in-rack
serviceability.
NOTE: Includes Rack Mounting Gen8 non-telescoping Friction Rail
Kit which does not allow for in rack serviceability. The HP 2U Gen8
Cable Management Arm is not available when using Friction Rails.
Caution: HP recommends that a minimum of two people is required
for all Rack Server installations. Please refer to your installation
instructions for proper tools and number of people to use for any
installation.
Server Warranty includes 3-Year Parts, 1-Year Labor, 1-Year Onsite
support with next business day response.
Base Models - LFF
HP ProLiant DL380e Processor(s)
Gen8 E5-2407 1P
8GB-R Hot Plug 8 LFF Cache Memory
460W PS Base Server
Memory
668665-xx1
Network Controller
Storage Controller
Hard Drive
Internal Storage
Optical Drive Bay
PCI-Express Slots
Power Supply
Fans
(1) Intel® Xeon® E5-2407 (2.2GHz/4-core/10MB/6.4GT-s QPI/80W,
DDR3-1066, HT) Processor
15MB (1x15MB) Level 3
8GB (2 x 4GB) Registered DIMMs PC3-10600R (1333MHz)
HP Ethernet 1Gb 4-port 366i Adapter
HP Dynamic Smart Array B320i/512MB FBWC Controller
NOTE: Provides support for up to 8 SAS/SATA drives, data
transmission speeds up to 6Gb/s and includes SAS license key.
None ship standard; includes 7 LFF hard drive blanks
NOTE: This model comes with 7 HDD blanks if no HDD is ordered.
8 LFF HDD Bays
1; (Optional: DVD-ROM, DVD-RW)
3 standard (1-FL/FH, 1HL/FH, 1-LP)
(1) HP 460W CS Gold Hot Plug Power Supply (92% Efficient)
4 Hot-Plug Non-redundant Fans
NOTE: Customers can upgrade to a redundant fan configuration
with the purchase of an option kit (see p/n 667855-B21)
DA - 14328 Worldwide QuickSpecs — Version 2 — 6/8/2012
Page 19
QuickSpecs
HP ProLiant DL380e Generation 8 (Gen8)
Pre-configured Models
Management
Form Factor
Warranty
HP iLO Management Engine (standard)
Optional: HP Insight Control
Rack (2U)
NOTE: Includes Rack Mounting Gen8 telescoping LFF Ball Bearing
Rail Kit which does allow for in rack serviceability. Due to the size
and weight of the server two people are required to install the server
into the rack. To assist in the installation of the server into the rack
an optional installation tool is available by contacting your local
services representative. Caution: HP recommends that a minimum
of two people is required for all Rack Server installations. Please
refer to your installation instructions for proper tools and number of
people to use for any installation.
Server Warranty includes 3-Year Parts, 1-Year Labor, 1-Year Onsite
support with next business day response.
Base Models - SFF
HP ProLiant DL380e Processor(s)
Gen8 E5-2407 1P
8GB-R Hot Plug 8 SFF Cache Memory
460W PS Base Server
Memory
668666-xx1
Network Controller
Storage Controller
Hard Drive
Internal Storage
Optical Drive Bay
PCI-Express Slots
Power Supply
Fans
Management
Form Factor
Warranty
(1) Intel® Xeon® E5-2407 (2.2GHz/6-core/15MB/95W, DDR3-1333,
HT Turbo2) Processor
15MB (1x15MB) Level 3
8GB (2 x 4GB) Registered DIMMs PC3-10600R (1333MHz)
HP Ethernet 1Gb 4-port 366i Adapter
HP Dynamic Smart Array B320i/512MB FBWC Controller
NOTE: Provides support for up to 8 SAS/SATA drives, data
transmission speeds up to 6Gb/s and includes SAS license key.
None ship standard; includes 7 SFF hard drive blanks
NOTE: This model comes with 7 HDD blanks if no HDD is ordered.
8 SFF HDD Bays
1; (Optional: DVD-ROM, DVD-RW)
3 standard (1-FL/FH, 1HL/FH, 1-LP)
(1) HP 460W CS Gold Hot Plug Power Supply (92% Efficient)
4 Hot-Plug Non-redundant Fans
NOTE: Customers can upgrade to a redundant fan configuration
with the purchase of an option kit (see p/n 667855-B21)
HP iLO Management Engine (standard)
Optional: HP Insight Control
Rack (2U)
NOTE: Includes Rack Mounting Gen8 telescoping SFF Ball Bearing
Rail Kit which does allow for in rack serviceability. Due to the size
and weight of the server two people are required to install the server
into the rack. To assist in the installation of the server into the rack
an optional installation tool is available by contacting your local
services representative. Caution: HP recommends that a minimum
of two people is required for all Rack Server installations. Please
refer to your installation instructions for proper tools and number of
people to use for any installation.
Server Warranty includes 3-Year Parts, 1-Year Labor, 1-Year Onsite
support with next business day response.
DA - 14328 Worldwide QuickSpecs — Version 2 — 6/8/2012
Page 20
QuickSpecs
HP ProLiant DL380e Generation 8 (Gen8)
Pre-configured Models
High Performance Models
NOTE: These Models are Energy Star Certified.
HP ProLiant DL380e Processor(s)
Gen8 E5-2450 2P
24GB-R P420 Hot Plug Cache Memory
8 SFF 750W PS Perf
Memory
Svr
Network Controller
668669-xx1
Storage Controller
Hard Drive
Internal Storage
Optical Drive Bay
PCI-Express Slots
Power Supply
Fans
Management
Energy Star
Form Factor
Warranty
(2) Intel® Xeon® E5-2450 (2.1GHz/8-core/20MB/8GT-s QPI/95W,
DDR3-1600, HT, Turbo2- 5/5/6/6/7/7/8/8) Turbo+ Processors
20MB (1x20MB) Level 3
24GB (6 x 4GB) Registered DIMMs PC3-12800R (1333MHz)
HP Ethernet 1Gb 4-port 366i Adapter
HP Smart Array P420i/1GB FBWC Controller (RAID 0/1/1+0/5/5+0)
None ship standard; includes 7 SFF hard drive blanks
NOTE: This model comes with 7 HDD blanks if no HDD is ordered.
8 SFF HDD Bays
1; (Optional: DVD-ROM, DVD-RW)
4 standard (1-FL/FH, 2-HL/FH, 1-LP)
(2) HP 750W CS Gold Hot Plug Power Supplies (94% Efficient)
6 Hot-plug Redundant Fans
HP iLO Management Engine (standard)
HP Insight Control Standard
Meets Energy Star requirements
Rack (2U)
NOTE: Includes Rack Mounting Gen8 telescoping 8SFF Ball
Bearing Rail Kit which does allow for in rack serviceability. Due to
the size and weight of the server two people are required to install
the server into the rack. . To assist in the installation of the server
into the rack an optional installation tool is available by contacting
your local services representative. Caution: HP recommends that a
minimum of two people is required for all Rack Server installations.
Please refer to your installation instructions for proper tools and
number of people to use for any installation.
Server Warranty includes 3-Year Parts, 1-Year Labor, 1-Year Onsite
support with next business day response.
Storage Models - LFF
HP ProLiant DL380e
Gen8 E5-2420 1P
12GB-R P420 Hot Plug
12 LFF 750W PS
Server
668667-xx1
Processor(s)
Cache Memory
Memory
Network Controller
Storage Controller
Hard Drive
Internal Storage
Optical Drive Bay
PCI-Express Slots
Power Supply
Fans
Management
Form Factor
(1) Intel® Xeon® E5-2420 (1.9GHz/6-core/15MB/7.2GT-s QPI/95W,
DDR3-1333, HT, Turbo2- 3/3/4/4/5/5) Turbo Processor
15MB (1x15MB) Level 3
12GB (3 x 4GB) Registered DIMMs PC3-12800R (1333MHz)
HP Ethernet 1Gb 4-port 366i Adapter
HP Smart Array P420i/1GB FBWC Controller (RAID 0/1/1+0/5/5+0)
None ship standard; includes 11 LFF hard drive blanks
NOTE: This model comes with 11 HDD blanks if no HDD is ordered.
12 LFF HDD Bays
N/A
4 standard (1-FL/FH, 2-HL/FH, 1-LP)
(1) HP 750W CS Gold Hot Plug Power Supply (92% Efficient)
4 Hot-Plug Non-redundant Fans
HP iLO Management Engine (standard)
Optional: HP Insight Control
Rack (2U)
NOTE: Includes Rack Mounting Gen8 telescoping LFF Ball Bearing
DA - 14328 Worldwide QuickSpecs — Version 2 — 6/8/2012
Page 21
QuickSpecs
HP ProLiant DL380e Generation 8 (Gen8)
Pre-configured Models
Warranty
Rail Kit which does allow for in rack serviceability. Due to the size
and weight of the server two people are required to install the server
into the rack. To assist in the installation of the server into the rack
an optional installation tool is available by contacting your local
services representative. Caution: HP recommends that a minimum
of two people is required for all Rack Server installations. Please
refer to your installation instructions for proper tools and number of
people to use for any installation.
Server Warranty includes 3-Year Parts, 1-Year Labor, 1-Year Onsite
support with next business day response.
Storage Models - SFF
HP ProLiant DL380e
Gen8 E5-2420 1P
12GB-R P420 Hot Plug
25 SFF 750W PS
Server
668668-xx1
Processor(s)
Cache Memory
Memory
Network Controller
Storage Controller
Hard Drive
Internal Storage
Optical Drive Bay
PCI-Express Slots
Power Supply
Fans
Management
Form Factor
Warranty
Country Code Key
xx = 00
xx = 20
xx = 29
xx = 37
xx = 42
xx = AA
(1) Intel® Xeon® E5-2420 (1.9GHz/6-core/15MB/7.2GT-s QPI/95W,
DDR3-1333, HT, Turbo2- 3/3/4/4/5/5) Turbo Procesor
15MB (1x15MB) Level 3
12GB (3 x 4GB) Registered DIMMs PC3-12800R (1333MHz)
HP Ethernet 1Gb 4-port 366i Adapter
HP Smart Array P420i/2GB FBWC Controller (RAID 0/1/1+0/5/5+0)
None ship standard; includes 24 SFF hard drive blanks
NOTE: This model comes with 24 HDD blanks if no HDD is ordered.
25 SFF HDD Bays
N/A
4 standard (1-FL/FH, 2-HL/FH, 1-LP)
(1) HP 750W CS Gold Hot Plug Power Supply (92% Efficient)
4 Hot-Plug Non-redundant Fans
HP iLO Management Engine (standard)
Optional: HP Insight Control
Rack (2U)
NOTE: Includes Rack Mounting Gen8 telescoping SFF Ball Bearing
Rail Kit which does allow for in rack serviceability. Due to the size
and weight of the server two people are required to install the server
into the rack. . To assist in the installation of the server into the rack
an optional installation tool is available by contacting your local
services representative. Caution: HP recommends that a minimum
of two people is required for all Rack Server installations. Please
refer to your installation instructions for proper tools and number of
people to use for any installation.
Server Warranty includes 3-Year Parts, 1-Year Labor, 1-Year Onsite
support with next business day response.
U.S.
Brazil
Japan
APD
Europe
PRC
DA - 14328 Worldwide QuickSpecs — Version 2 — 6/8/2012
Page 22
QuickSpecs
HP ProLiant DL380e Generation 8 (Gen8)
Configuration Information - Factory Integrated Models
NOTE: This section lists some of the steps required to configure a Factory Integrated Model. To ensure only valid
configurations are ordered, HP recommends the use of an HP approved configurator. Contact your local sales
representative for information on configurable product offerings and requirements.
NOTE: Factory Integrated Models must start with a CTO Server.
NOTE: FIO indicates that this option is only available as a factory installable option.
NOTE: All Factory Integrated Models will be populated with sufficient hard drive blanks based on the number of initial hard
drives ordered with the server.
Step 1: Base Configuration (choose one of the following configurable models)
NOTE: Rail kits and cable management solutions are optional in CTO. See "Step 3: Choose Additional Factory Integratable
Options" for details on ordering.
NOTE: The DL380e ships standard with the Dynamic Smart Array B120i controller which provides support for up to 6 SATA
drives (greater than 4 drives requires additional cable, p/n 675856-B21) and data transmission speeds up to 3Gb/s.
Customers requiring SAS support or greater than 6 drives should select either a Smart Array family controller or the HP
Dynamic Smart Array B320i controller (p/n 661387-B21, implemented via riser).
NOTE: Number of HDD blanks in a given chassis is same as number of drive cage bays.
NOTE: Power Supply not included - choose from Options section.
HP Models
HP ProLiant DL380e Gen8 12 LFF Configure-to-order Server
669254-B21
NOTE: This CTO server is designed for customers who are looking for maximum
2U storage performance and density. This model requires two (2) Smart Array
P420 controllers if using more than 8 drives.
Factory Integrated Model ships with:
2 x HP Smart Socket Guides for fast processor installation.
12 DIMM slots for RDIMM, LRDIMM and UDIMM Memory installation
HP Ethernet 1Gb 4-port 366i Adapter
HP Dynamic Smart Array B120i Controller with Zero Memory (ZM)
I/O slots - 4 Slots come standard:
Slot 1 - FL/FH x4 PCIe 3.0 (x8 connector)
Slot 2 - HL/FH x8 PCIe 3.0 (x16 connector)
Slot 3 - HL/FH x8 PCIe 3.0 (x8 connector)
Slot 4 - Low Profile x4 PCIe 2.0 (x8 connector)
Additional Slots may be added via selections from the PCI Information and
Options subsection
System Fans - 4 (1 additional fan included with purchase of second processor)
Drive Cage - 12-LFF
USB - 4 Rear, 1 Front, 1 Internal, 1 SD slot
HP iLO Management Engine (standard)
NOTE: New options are available for Rack Rail Kits; these options are no longer
standard on-board with this Model Part Number. Please see HP Rack Options
below for optional required options.
HP ProLiant DL380e Gen8 12 LFF Configure-to-order Server
NOTE: This CTO server includes an "expander-based" storage backplane. A
single Smart Array P420 controller is capable of controlling all 12 LFF drives and
optional rear drives.
Factory Integrated Model ships with:
2 x HP Smart Socket Guides for fast processor installation.
12 DIMM slots for RDIMM, LRDIMM and UDIMM Memory installation
HP Ethernet 1Gb 4-port 366i Adapter
HP Dynamic Smart Array B120i Controller with Zero Memory (ZM)
I/O slots - 4 Slots come standard:
669257-B21
Slot 1 - FL/FH x4 PCIe 3.0 (x8 connector)
Slot 2 - HL/FH x8 PCIe 3.0 (x16 connector)
Slot 3 - HL/FH x8 PCIe 3.0 (x8 connector)
DA - 14328 Worldwide QuickSpecs — Version 2 — 6/8/2012
Page 23
QuickSpecs
HP ProLiant DL380e Generation 8 (Gen8)
Configuration Information - Factory Integrated Models
Slot 4 - Low Profile x4 PCIe 2.0 (x8 connector)
Additional Slots may be added via selections from the PCI Information and
Options subsection
System Fans - 4 (1 additional fan included with purchase of second processor)
Drive Cage - 12-LFF
USB - 4 Rear, 1 Front, 1 Internal, 1 SD slot
HP iLO Management Engine (standard)
NOTE: New options are available for Rack Rail Kits; these options are no longer
standard on-board with this Model Part Number. Please see HP Rack Options
below for optional required options.
HP ProLiant DL380e Gen8 25 SFF Configure-to-order Server
NOTE: This CTO server includes an "expander-based" storage backplane. A
single Smart Array P420 is capable of controlling all 25 SFF drives and optional
rear drives.
Factory Integrated Model ships with:
2 x HP Smart Socket Guides for fast processor installation.
12 DIMM slots for RDIMM, LRDIMM and UDIMM Memory installation
HP Ethernet 1Gb 4-port 366i Adapter
HP Dynamic Smart Array B120i Controller with Zero Memory (ZM)
I/O slots - 4 Slots come standard:
669256-B21
Slot 1 - FL/FH x4 PCIe 3.0 (x8 connector)
Slot 2 - HL/FH x8 PCIe 3.0 (x16 connector)
Slot 3 - HL/FH x8 PCIe 3.0 (x8 connector)
Slot 4 - Low Profile x4 PCIe 2.0 (x8 connector)
Additional Slots may be added via selections from the PCI Information and
Options subsection
System Fans - 4 (1 additional fans included with purchase of second processor)
Drive Cage - 25-SFF (Optical media drive optional)
USB - 4 Rear, 1 Front, 1 Internal, 1 SD slot
HP iLO Management Engine (standard)
NOTE: New options are available for Rack Rail Kits; these options are no longer
standard on-board with this Model Part Number. Please see HP Rack Options
below for optional required options.
HP ProLiant DL380e Gen8 8 LFF Configure-to-order Server
NOTE: This CTO server supports 4, 6, and 8LFF drive configurations based on
the selection of controller. The HP Dynamic Smart Array B120i is capable of
controlling up to 6 SATA drives. Greater than 4 SATA drives require the use of
an option cable, p/n 675856-B21). Greater than 6 SATA drives require an HP
Dynamic Smart Array B320i or P420 or greater controller.
Factory Integrated Model ships with:
2 x HP Smart Socket Guides for fast processor installation.
12 DIMM slots for RDIMM, LRDIMM and UDIMM Memory installation
HP Ethernet 1Gb 4-port 366i Adapter
HP Dynamic Smart Array B120i Controller with Zero Memory (ZM)
I/O slots - 4 Slots come standard:
669255-B21
Slot 1 - FL/FH x4 PCIe 3.0 (x8 connector)
Slot 2 - HL/FH x8 PCIe 3.0 (x16 connector)
Slot 3 - HL/FH x8 PCIe 3.0 (x8 connector)
Slot 4 - Low Profile x4 PCIe 2.0 (x8 connector)
Additional Slots may be added via selections from the PCI Information and
Options subsection
System Fans - 4 (one additional fan included with purchase of second
DA - 14328 Worldwide QuickSpecs — Version 2 — 6/8/2012
Page 24
QuickSpecs
HP ProLiant DL380e Generation 8 (Gen8)
Configuration Information - Factory Integrated Models
processor)
Drive Cage - 8-LFF (Optical media drive optional)
USB - 4 Rear, 2 Front, 1 Internal, 1 SD slot
HP iLO Management Engine (standard)
NOTE: New options are available for Rack Rail Kits; these options are no longer
standard on-board with this Model Part Number. Please see HP Rack Options
below for optional required options.
HP ProLiant DL380e Gen8 8 SFF Configure-to-order Server
NOTE: This CTO server supports up to 8SFF drives and is expandable up to 16
SFF drives via the optional 8SFF upgrade kit (p/n 668295-B21).
Factory Integrated Model ships with:
2 x HP Smart Socket Guides for fast processor installation.
12 DIMM slots for RDIMM, LRDIMM and UDIMM Memory installation
HP Ethernet 1Gb 4-port 366i Adapter
HP Dynamic Smart Array B120i Controller with Zero Memory (ZM)
I/O slots - 4 Slots ship standard:
669253-B21
Slot 1 - FL/FH x4 PCIe 3.0 (x8 connector)
Slot 2 - HL/FH x8 PCIe 3.0 (x16 connector)
Slot 3 - HL/FH x8 PCIe 3.0 (x8 connector)
Slot 4 - Low Profile x4 PCIe 2.0 (x8 connector)
Additional Slots may be added via selections from the PCI Information and
Options subsection
System Fans - 4 (one additional fan included with purchase of second
processor)
Drive Cage - 8-SFF (Optical media drive optional)
USB - 4 Rear, 2 Front, 1 Internal, 1 SD slot
HP iLO Management Engine (standard)
NOTE: New options are available for Rack Rail Kits; these options are no longer
standard on-board with this Model Part Number. Please see HP Rack Options
below for optional required options.
Step 2: Choose Required Options (only one of the following from each list unless
otherwise noted)
HP Processors
NOTE: If two processors are desired, select one xxxxxx-L21 and one xxxxxxB21
Entry Processors
NOTE: All support up to 1066MHz memory speeds.
HP DL380e Gen8 Intel® Xeon® E5-2407 (2.2GHz/4-core/10MB/80W) FIO
Processor Kit
HP DL380e Gen8 Intel® Xeon® E5-2403 (1.8GHz/4-core/10MB/80W) FIO
Processor Kit
Base Processors
NOTE: All support up to1333MHz DDR3 memory speeds.
HP DL380e Gen8 Intel® Xeon® E5-2440 (2.4GHz/6-core/15MB/95W) FIO
Processor Kit
HP DL380e Gen8 Intel® Xeon® E5-2430 (2.2GHz/6-core/15MB/95W) FIO
Processor Kit
HP DL380e Gen8 Intel® Xeon® E5-2430L (2.0GHz/6-core/15MB/60W) FIO
Processor Kit
HP DL380e Gen8 Intel® Xeon® E5-2420 (1.9GHz/6-core/15MB/95W) FIO
Processor Kit
DA - 14328 Worldwide QuickSpecs — Version 2 — 6/8/2012
661132-L21
661134-L21
661124-L21
661126-L21
661138-L21
661128-L21
Page 25
QuickSpecs
HP ProLiant DL380e Generation 8 (Gen8)
Configuration Information - Factory Integrated Models
HP Memory
Performance Processors
NOTE: All support up to 1600MHz DDR3 memory speeds
HP DL380e Gen8 Intel® Xeon® E5-2470 (2.3GHz/8-core/20MB/95W) FIO
Processor Kit
HP DL380e Gen8 Intel® Xeon® E5-2450 (2.1GHz/8-core/20MB/95W) FIO
Processor Kit
HP DL380e Gen8 Intel® Xeon® E5-2450L (1.8GHz/8-core/20MB/70W) FIO
Processor Kit
NOTE: To realize the performance memory capabilities listed in this document,
HP SmartMemory is required. For additional information, please see the HP
SmartMemory QuickSpecs at:
http://h18000.www1.hp.com/products/quickspecs/14225_div/14225_div.html
(Worldwide)
NOTE: HP memory from previous generation servers are not fully compatible
with Smart Memory features in Gen8 Servers.
Registered DIMMs (RDIMMs)
HP 4GB (1x4GB) Single Rank x4 PC3L-10600R (DDR3-1333) Registered CAS-9
Low Voltage Memory Kit
HP 4GB (1x4GB) Single Rank x4 PC3-12800R (DDR3-1600) Registered CAS-11
Memory Kit
HP 8GB (1x8GB) Dual Rank x4 PC3L-10600R (DDR3-1333) Registered CAS-9
Low Voltage Memory Kit
HP 8GB (1x8GB) Single Rank x4 PC3-12800R (DDR3-1600) Registered CAS-11
Memory Kit
HP 8GB (1x8GB) Dual Rank x4 PC3-12800R (DDR3-1600) Registered CAS-11
Memory Kit
HP 16GB (1x16GB) Dual Rank x4 PC3L-10600R (DDR3-1333) Registered CAS9 Low Voltage Memory Kit
HP 16GB (1x16GB) Dual Rank x4 PC3-12800R (DDR3-1600) Registered CAS11 Memory Kit
Unbuffered with ECC DIMMs (UDIMMs)
HP 2GB (1x2GB) Single Rank x8 PC3-12800E (DDR3-1600) Unbuffered CAS11 Memory Kit
HP 2GB (1x2GB) Single Rank x8 PC3L-10600E (DDR3-1333) Unbuffered CAS9 Low Voltage Memory Kit
HP 4GB (1x4GB) Dual Rank x8 PC3-12800E (DDR3-1600) Unbuffered CAS-11
Memory Kit
HP 4GB (1x4GB) Dual Rank x8 PC3L-10600E (DDR3-1333) Unbuffered CAS-9
Low Voltage Memory Kit
HP 8GB (1x8GB) Dual Rank x8 PC3-12800E (DDR3-1600) Unbuffered CAS-11
Memory Kit
HP 8GB (1x8GB) Dual Rank x8 PC3L-10600E (DDR3-1333) Unbuffered CAS-9
Low Voltage Memory Kit
Load Reduced DIMMs (LRDIMMs)
HP 32GB (1x32GB) Quad Rank x4 PC3L-10600L (DDR3-1333) Load Reduced
CAS-9 Low Voltage Memory Kit
NOTE: All DDR3 memory option kits consist of one DIMM per kit. For detailed
memory configuration rules and guidelines, please use the Online DDR3
Memory Configuration Tool: www.hp.com/go/ddr3memory-configurator.
NOTE: PC3L is a low voltage memory.
NOTE: Depending on the memory configuration and processor model, 1600MHz
and 1333MHz memory may operate at a lower speed. Please see the see the
"Memory" section later in this document and the Online Memory Configuration
DA - 14328 Worldwide QuickSpecs — Version 2 — 6/8/2012
661118-L21
661120-L21
661136-L21
647893-B21
647895-B21
647897-B21
647899-B21
690802-B21
647901-B21
672631-B21
669320-B21
647905-B21
669322-B21
647907-B21
669324-B21
647909-B21
647903-B21
Page 26
QuickSpecs
HP ProLiant DL380e Generation 8 (Gen8)
Configuration Information - Factory Integrated Models
HP Power Supplies
Tool for details at www.hp.com/go/ddr3memory-configurator.
NOTE: Prior to making a power supply selection it is highly recommended that
the HP Power Advisor is run to determine the right size power supply for your
server configuration. The HP Power Advisor is located at:
www.hp.com/go/hppoweradvisor.
HP Common Slot Platinum Plus Power Supply Kits
NOTE: The following Power Supplies offer up to 94% Efficiency support for
Intelligent Power Discovery.
HP 460W Common Slot Platinum Plus Hot Plug Power Supply Kit
HP 750W Common Slot Platinum Plus Hot Plug Power Supply Kit
HP 1200W Common Slot Platinum Plus Hot Plug Power Supply Kit
HP Common Slot Gold Power Supplies
NOTE: The following Power Supplies offer 92% Efficiency.
HP 460W Common Slot Gold Hot Plug Power Supply Kit
HP 750W Common Slot Gold Hot Plug Power Supply Kit
HP Common Slot -48VDC Power Supplies
NOTE: The following Power Supplies offer 92% Efficiency.
HP 750W Common Slot -48VDC Hot Plug Power Supply Kit
656362-B21
656363-B21
656364-B21
503296-B21
512327-B21
636673-B21
NOTE: The HP 750W Common Slot -48VDC power supply does not ship with a
power cable. It has been designed with a terminal block connection allowing for
custom design of power cords by the user.
NOTE: Option Kits for AC power supplies include the power supply and one
PDU IEC cable.
NOTE: Power Specification and Technical Content for supported power supplies
can be found at:
http://h18000.www1.hp.com/products/quickspecs/14209_div/14209_div.html
Step 3: Choose Additional Factory Integratable Options (only one of the following
from each list unless otherwise noted)
HP Cable Options
HP I/O Expansion
Options
HP Rack Kits
HP DL380e Gen8 8 LFF FIO Mini SAS Kit
HP DL380e Gen8 CPU1 with SAS Support FIO Riser Kit
675160-B21
661402-B21
HP 2U Friction Gen8 Rail FIO Kit
663476-B21
Step 4: Choose Additional Options for Factory Integration
NOTE: For additional options, please refer to the "Core Options and Additional Options" section below.
DA - 14328 Worldwide QuickSpecs — Version 2 — 6/8/2012
Page 27
QuickSpecs
HP ProLiant DL380e Generation 8 (Gen8)
Core Options
NOTE: Some options may not be integrated at the factory. Contact your local sales representative for additional information.
HP Unique Options
HP DL380eGen8 HP Fan Kit
667855-B21
NOTE: Upgrades a non-redundant server with additional hot-plug fans.
HP DL380e Gen8 8SFF HDD CAGE Kit
668295-B21
NOTE: With upgrade of 8SFF Cage, there is no Optical Drive support and an
additional storage controller is required for 1:1 CTO Server.
HP DL380e Gen8 CPU1 Riser Kit
661404-B21
HP DL380e Gen8 x16 PCI-E Riser Kit
661628-B21
HP Graphic Card Power Adapter Kit
663282-B21
HP Processors
Entry Processors
NOTE: All support up to 1066MHz memory speeds.
HP DL380e Gen8 Intel® Xeon® E5-2407 (2.2GHz/4-core/10MB/80W) Processor
Kit
HP DL380e Gen8 Intel® Xeon® E5-2403 (1.8GHz/4-core/10MB/80W) Processor
Kit
Base Processors
NOTE: All support up to1333MHz DDR3 memory speeds.
HP DL380e Gen8 Intel® Xeon® E5-2440 (2.4GHz/6-core/15MB/95W) Processor
Kit
HP DL380e Gen8 Intel® Xeon® E5-2430 (2.2GHz/6-core/15MB/95W) Processor
Kit
HP DL380e Gen8 Intel® Xeon® E5-2430L (2.0GHz/6-core/15MB/60W)
Processor Kit
HP DL380e Gen8 Intel® Xeon® E5-2420 (1.9GHz/6-core/15MB/95W) Processor
Kit
Performance Processors
NOTE: All support up to 1600MHz DDR3 memory speeds.
HP DL380e Gen8 Intel® Xeon® E5-2470 (2.3GHz/8-core/20MB/95W) Processor
Kit
HP DL380e Gen8 Intel® Xeon® E5-2450 (2.1GHz/8-core/20MB/95W) Processor
Kit
HP DL380e Gen8 Intel® Xeon® E5-2450L (1.8GHz/8-core/20MB/70W)
Processor Kit
NOTE: Up to 2 processors supported.
NOTE: HT indicates that the processor model supports Intel® /Hyper-Threading
Technology
NOTE: Turbo2: Intel® Turbo Boost Technology 2.0 provides more computing
power when you need it with performance that adapts to spikes in your workload
and delivers more performance upside than then previous generation turbo
technology.
NOTE: DDR3 speed is the maximum memory speed of the processor. Actual
memory speed may depend on the quantity and type of DIMMs installed.
NOTE: For the Intel® C600 Chipset E5-2400 Series, the letter preceding the
model number indicates the Product Line (E3, E5, E7); 2400x v#, 2 = number of
CPUs in a Node, 4 is socket/segment designation, 00 = Processor SKU, x = L
for low power SKUs and v#(not yet designated) = version number.
DA - 14328 Worldwide QuickSpecs — Version 2 — 6/8/2012
661132-B21
661134-B21
661124-B21
661126-B21
661138-B21
661128-B21
661118-B21
661120-B21
661136-B21
Page 28
QuickSpecs
HP ProLiant DL380e Generation 8 (Gen8)
Core Options
HP Memory
NOTE: To realize the performance memory capabilities listed in this
document, HP SmartMemory is required. For additional information, please
see the HP SmartMemory QuickSpecs at:
http://h18000.www1.hp.com/products/quickspecs/14225_div/14225_div.html
(Worldwide)
NOTE: HP memory from previous generation servers are not fully
compatible with Smart Memory features in Gen8 Servers.
Registered DIMMs (RDIMMs)
HP 4GB (1x4GB) Single Rank x4 PC3L-10600R (DDR3-1333) Registered
CAS-9 Low Voltage Memory Kit
HP 4GB (1x4GB) Single Rank x4 PC3-12800R (DDR3-1600) Registered
CAS-11 Memory Kit
HP 8GB (1x8GB) Dual Rank x4 PC3L-10600R (DDR3-1333) Registered
CAS-9 Low Voltage Memory Kit
HP 8GB (1x8GB) Single Rank x4 PC3-12800R (DDR3-1600) Registered
CAS-11 Memory Kit
HP 8GB (1x8GB) Dual Rank x4 PC3-12800R (DDR3-1600) Registered CAS11 Memory Kit
647893-B21
647895-B21
647897-B21
647899-B21
690802-B21
HP 16GB (1x16GB) Dual Rank x4 PC3L-10600R (DDR3-1333) Registered
CAS-9 Low Voltage Memory Kit
HP 16GB (1x16GB) Dual Rank x4 PC3-12800R (DDR3-1600) Registered
CAS-11 Memory Kit
Unbuffered with ECC DIMMs (UDIMMs)
HP 2GB (1x2GB) Single Rank x8 PC3-12800E (DDR3-1600) Unbuffered
CAS-11 Memory Kit
HP 2GB (1x2GB) Single Rank x8 PC3L-10600E (DDR3-1333) Unbuffered
CAS-9 Low Voltage Memory Kit
HP 4GB (1x4GB) Dual Rank x8 PC3-12800E (DDR3-1600) Unbuffered CAS11 Memory Kit
HP 4GB (1x4GB) Dual Rank x8 PC3L-10600E (DDR3-1333) Unbuffered
CAS-9 Low Voltage Memory Kit
HP 8GB (1x8GB) Dual Rank x8 PC3-12800E (DDR3-1600) Unbuffered CAS11 Memory Kit
HP 8GB (1x8GB) Dual Rank x8 PC3L-10600E (DDR3-1333) Unbuffered
CAS-9 Low Voltage Memory Kit
Load Reduced DIMMs (LRDIMMs)
HP 32GB (1x32GB) Quad Rank x4 PC3L-10600L (DDR3-1333) Load
Reduced CAS-9 Low Voltage Memory Kit
NOTE: All DDR3 memory option kits consist of one DIMM per kit. For
detailed memory configuration rules and guidelines, please use the Online
DDR3 Memory Configuration Tool: www.hp.com/go/ddr3memoryconfigurator.
NOTE: PC3L is a low voltage memory.
647901-B21
HP Optical Drives
HP 12.7mm Slim SATA DVD ROM JackBlack Optical Drive
HP 12.7mm Slim SATA DVD RW JackBlack Optical Drive
652232-B21
652235-B21
HP Hard Drives
NOTE: The HP ProLiant DL380e Gen8 Smart Storage solutions are
equipped with entirely re-designed Small Form Factor (SFF 2.5 in) and Large
Form Factor (LFF 3.5 in) hot plug carriers for HP Qualified Hard Drives and
Solid State Drives. These new carriers provide status and activity indicators
DA - 14328 Worldwide QuickSpecs — Version 2 — 6/8/2012
672631-B21
669320-B21
647905-B21
669322-B21
647907-B21
669324-B21
647909-B21
647903-B21
Page 29
QuickSpecs
HP ProLiant DL380e Generation 8 (Gen8)
Core Options
as well as caution indicators for "Do Not Remove".
NOTE: The components of a storage subsystem (e.g. the drive, the
HBA/controller, firmware, and the server backplane) should operate at the
same data transfer rate or the system bandwidth will be negotiated down to
an acceptable level for all components.
NOTE: Hard drives have either a one year or three year warranty; refer to
the specific hard drive QuickSpecs for details.
SAS Hot Plug with SmartDrive SFF (2.5-inch) Enterprise Drives
HP 900GB 6G SAS 10K rpm SFF (2.5-inch) SC Enterprise 3yr Warranty
Hard Drive
HP 600GB 6G SAS 10K rpm SFF (2.5-inch) SC Enterprise 3yr Warranty
Hard Drive
HP 450GB 6G SAS 10K rpm SFF (2.5-inch) SC Enterprise 3yr Warranty
Hard Drive
HP 300GB 6G SAS 10K rpm SFF (2.5-inch) SC Enterprise 3yr Warranty
Hard Drive
HP 300GB 6G SAS 15K rpm SFF (2.5-inch) SC Enterprise 3yr Warranty
Hard Drive
HP 146GB 6G SAS 15K rpm SFF (2.5-inch) SC Enterprise 3yr Warranty
Hard Drive
SAS Hot Plug SmartDrive SFF (2.5-inch) Midline Drives
HP 1TB 6G SAS 7.2K rpm SFF (2.5-inch) SC Midline 1yr Warranty Hard
Drive
HP 500GB 6G SAS 7.2K rpm SFF (2.5-inch) SC Midline 1yr Warranty Hard
Drive
SAS Hot Plug SmartDrive LFF (3.5-inch) Enterprise Drives
HP 600GB 6G SAS 15K rpm LFF (3.5-inch) SC Enterprise 3yr Warranty
Hard Drive
HP 450GB 6G SAS 15K rpm LFF (3.5-inch) SC Enterprise 3yr Warranty
Hard Drive
SAS Hot Plug SmartDrive LFF (3.5-inch) Midline Drives
HP 3TB 6G SAS 7.2K rpm LFF (3.5-inch) SC Midline 1yr Warranty Hard
Drive
HP 2TB 6G SAS 7.2K rpm LFF (3.5-inch) SC Midline 1yr Warranty Hard
Drive
HP 1TB 6G SAS 7.2K rpm LFF (3.5-inch) SC Midline 1yr Warranty Hard
Drive
NOTE: Please see the QuickSpecs for Technical Specifications and
additional information:
http://h18000.www1.hp.com/products/quickspecs/12244_div/12244_div.html
(Worldwide)
6G SATA Hot Plug with SmartDrive SFF (2.5-inch) Midline (MDL) Drives
HP 1TB 6G SATA 7.2K rpm SFF (2.5-inch) SC Midline 1yr Warranty Hard
Drive
HP 500GB 6G SATA 7.2K rpm SFF (2.5-inch) SC Midline 1yr Warranty Hard
Drive
6G SATA Hot Plug with SmartDrive LFF (3.5-inch) Midline (MDL) Drives
HP 3TB 6G SATA 7.2K rpm LFF (3.5-inch) SC Midline 1yr Warranty Hard
Drive
HP 2TB 6G SATA 7.2K rpm LFF (3.5-inch) SC Midline 1yr Warranty Hard
Drive
DA - 14328 Worldwide QuickSpecs — Version 2 — 6/8/2012
652589-B21
652583-B21
652572-B21
652564-B21
652611-B21
652605-B21
652749-B21
652745-B21
652620-B21
652615-B21
652766-B21
652757-B21
652753-B21
655710-B21
655708-B21
628061-B21
658079-B21
Page 30
QuickSpecs
HP ProLiant DL380e Generation 8 (Gen8)
Core Options
HP 1TB 6G SATA 7.2K rpm LFF (3.5-inch) SC Midline 1yr Warranty Hard
Drive
HP 500GB 6G SATA 7.2K rpm LFF (3.5-inch) SC Midline 1yr Warranty Hard
Drive
NOTE: Please see the QuickSpecs for Technical Specifications and
additional information:
http://h18000.www1.hp.com/products/quickspecs/13021_div/13021_div.html
(Worldwide)
6G SAS MLC Hot Plug SFF (2.5-inch) Enterprise Mainstream Solid State
Drives
HP 800GB 6G SAS MLC SFF (2.5-inch) SC Enterprise Mainstream 3yr
Warranty Solid State Drive
HP 400GB 6G SAS MLC SFF (2.5-inch) SC Enterprise Mainstream 3yr
Warranty Solid State Drive
HP 200GB 6G SAS MLC SFF (2.5-inch) SC Enterprise Mainstream 3yr
Warranty Solid State Drive
6G SAS SLC Hot Plug SFF (2.5-inch) Enterprise Performance Solid
State Drives
657750-B21
HP 400GB 6G SAS SLC SFF (2.5-inch) SC Enterprise Performance 3yr
Warranty Solid State Drive
HP 200GB 6G SAS SLC SFF (2.5-inch) SC Enterprise Performance 3yr
Warranty Solid State Drive
3G SATA MLC Hot Plug SFF (2.5-inch) Enterprise Mainstream Solid
State Drives
HP 400GB 3G SATA MLC SFF (2.5-inch) SC Enterprise Mainstream 3yr
Warranty Solid State Drive
HP 200GB 3G SATA MLC SFF (2.5-inch) SC Enterprise Mainstream 3yr
Warranty Solid State Drive
HP 100GB 3G SATA MLC SFF (2.5-inch) SC Enterprise Mainstream 3yr
Warranty Solid State Drive
3G SATA MLC Hot Plug LFF (3.5-inch) Enterprise Mainstream Solid
State Drives
HP 400GB 3G SATA MLC LFF (3.5-inch) SC Enterprise Mainstream 3yr
Warranty Solid State Drive
HP 200GB 3G SATA MLC LFF (3.5-inch) SC Enterprise Mainstream 3yr
Warranty Solid State Drive
HP 100GB 3G SATA MLC LFF (3.5-inch) SC Enterprise Mainstream 3yr
Warranty Solid State Drive
NOTE: Please see the QuickSpecs for Technical Specifications and
additional information:
http://h18000.www1.hp.com/products/quickspecs/14038_div/14038_div.html
(Worldwide)
Hard Drive Kits
NOTE: All Factory Integrated Models will be populated with sufficient hard
drive blanks based on the number of initial hard drives ordered with the
server.
HP LFF Gen8 Hard Drive Blank Kit
HP SFF Gen8 Hard Drive Blank Kit
HP 2U Gen8 Rear 2LFF Kit
NOTE: Supports 2 hot plug drives in the back of server and the kit includes
multiple cable options which allow connections between rear, front
backplanes and also between rear backplane, motherboard.
653082-B21
DA - 14328 Worldwide QuickSpecs — Version 2 — 6/8/2012
658071-B21
653109-B21
653105-B21
658478-B21
653078-B21
653120-B21
653118-B21
653112-B21
653126-B21
653124-B21
653122-B21
666986-B21
666987-B21
663278-B21
Page 31
QuickSpecs
HP ProLiant DL380e Generation 8 (Gen8)
Core Options
HP 2U Gen8 Rear 2SFF Kit
NOTE: Supports 2 hot plug drives in the back of server and the kit includes
multiple cable options which allow connections between rear, front
backplanes and also between rear backplane, motherboard.
HP DL380eGen8 8SFF HDD CAGE Kit
NOTE: Provides support for an additional 8 SFF drives. Requires a separate
controller. HP recommends the Smart Array P420 controller with 1Gb of
FBWC.
Hard Drive Cables
HP Gen8 2-port SATA Cable Kit
NOTE: This cable allows the customer to upgrade their B120i-based
configuration to support up to 6 LFF SATA drives.
HP Networking
Gigabit Ethernet adapters
HP NC112T PCI Express Gigabit Server Adapter
HP NC365T 4-port Ethernet Server Adapter
HP Ethernet 1Gb 4-port 331T Adapter
663280-B21
668295-B21
675856-B21
503746-B21
593722-B21
647594-B21
HP Ethernet 1Gb 2-port 332T Adapter
HP Ethernet 1Gb 2-port 361T Adapter
10 Gigabit Ethernet Adapters
NOTE: A minimum of two Gigabytes (2 GB) of server memory is required per
each adapter.
NOTE: Direct Attach Cable (DAC) for copper environments or fiber
transceivers and cables for fiber-optic environments must be purchased
separately.
HP NC523SFP 10Gb 2-port Server Adapter
HP Ethernet 10Gb 2-port 530SFP Adapter
HP NC552SFP 10Gb 2-port Ethernet Server Adapter
NOTE: Please see the QuickSpecs for Technical Specifications and
additional information: www.hp.com/go/ProLiantNICs
615732-B21
652497-B21
HP InfiniBand
QLogic InfiniBand 4X QDR PCI-E G2 Dual Port HCA
HP InfiniBand 4X QDR ConnectX-2 PCIe G2 Dual Port HCA
HP InfiniBand FDR/EN 10/40Gb Dual Port 544QSFP Adapter
NOTE: Please see the QuickSpecs for additional information:
http://h18000.www1.hp.com/products/quickspecs/13078_div/13078_div.html
583211-B21
592520-B21
649281-B21
HP I/O Expansion
Options
HP DL380e Gen8 CPU1 Riser Kit
NOTE: This kit provides three slots that run off of first processor.
HP DL380e Gen8 x16 PCI-E Riser Kit
NOTE: This kit provides two additional slots that run off of second processor.
661404-B21
DA - 14328 Worldwide QuickSpecs — Version 2 — 6/8/2012
593717-B21
652503-B21
614203-B21
661628-B21
Page 32
QuickSpecs
HP ProLiant DL380e Generation 8 (Gen8)
Core Options
HP Power Supplies
HP Graphic Options
HP Cooling Options
NOTE: Prior to making a power supply selection it is highly recommended
that the HP Power Advisor is run to determine the right size power supply for
your server configuration. The HP Power Advisor is located at:
www.hp.com/go/hppoweradvisor.
HP Common Slot Platinum Plus Power Supply Kits
NOTE: The following Power Supplies offer 94% Efficiency with support for
Intelligent Power Discovery.
HP 460W Common Slot Platinum Plus Hot Plug Power Supply Kit
HP 750W Common Slot Platinum Plus Hot Plug Power Supply Kit
HP 1200W Common Slot Platinum Plus Hot Plug Power Supply Kit
HP Common Slot Gold Power Supplies
NOTE: The following Power Supplies offer 92% Efficiency.
HP 460W Common Slot Gold Hot Plug Power Supply Kit
HP 750W Common Slot Gold Hot Plug Power Supply Kit
HP Common Slot -48VDC Power Supplies
NOTE: The following Power Supplies offer 92% Efficiency.
HP 750W Common Slot -48VDC Hot Plug Power Supply Kit
NOTE: The HP 750W Common Slot -48VDC power supply does not ship
with a power cable. It has been designed with a terminal block connection
allowing for custom design of power cords by the user.
NOTE: Option Kits contain optional power supply, an IEC power cable and
PDU IEC cables.
NOTE: Power Specification and Technical Content for supported power
supplies can be found at:
http://h18000.www1.hp.com/products/quickspecs/14209_div/14209_div.html
656362-B21
656363-B21
656364-B21
503296-B21
512327-B21
636673-B21
HP Graphic Card Power Adapter Kit
NOTE: The adapter kit is used to provide power to high-wattage cards
(example: graphics cards) that require up to 225W of power.
NOTE: High wattage cards are supported on the x16 FL/FH slot which is
controlled by the second processor. p/n 661628-b21 is required.
NVIDIA Quadro 4000 2GB PCI-E Adapter
NOTE: Only the following OS types are supported: 64-bit Only: Red Hat
Enterprise Linux 5.x, Red Hat Enterprise Linux 6.x, SUSE Linux Enterprise
Server 11 SPx. 64-bit Only: Windows Server 2008 R2 SPx.
NVIDIA Quadro 6000 6GB PCI-E Adapter
NOTE: Only the following OS types are supported: 64-bit Only: Red Hat
Enterprise Linux 5.x, Red Hat Enterprise Linux 6.x, SUSE Linux Enterprise
Server 11 SPx. 64-bit Only: Windows Server 2008 R2 SPx.
663282-B21
HP DL380eGen8 HP Fan Kit
NOTE: This kit contains a single fan and is used to upgrade non-redundant
configurations to redundant configurations.
667855-B21
DA - 14328 Worldwide QuickSpecs — Version 2 — 6/8/2012
655933-B21
655935-B21
Page 33
QuickSpecs
HP ProLiant DL380e Generation 8 (Gen8)
Additional Options
NOTE: Some options may not be integrated at the factory. To ensure only valid configurations are ordered, HP
recommends the use of an HP approved configurator. Contact your local sales representative for additional
information.
HP Insight Software HP Insight Control
HP Insight Control including 1yr 24x7 Technical Support and Updates
T9074BAE
Electronic License
HP Insight Control including 1yr 24x7 Technical Support and Updates Single
452148-B22
Server License
HP Insight Management Media Kit
436222-B21
NOTE: HP Insight Management Media Kit contains DVDs without licenses.
Contains HP Systems Insight Manager, HP Insight Control, HP Matrix
Operating Environment, and Virtual Connect Enterprise Manager software.
Uses an integrated installer to perform quick and accurate software
installation and updates.
HP Insight Control Server Deployment
HP Insight Control Server Deployment including 1yr 24x7 Support Electronic
T9082AAE
License
HP Insight Control Server Deployment including 1yr 24x7 Support Single
452151-B21
Server License
NOTE: Electronic and Flexible-Quantity licenses can be used to purchase
multiple licenses with a single activation key.
NOTE: Customer will receive a license entitlement certificate. The license
entitlement certificate must be redeemed online or via fax in order to obtain
the license activation key(s). Includes one year of 24 x 7 HP Software
Technical Support and Update Service.
NOTE: Licenses ship without media. The HP Insight Management Media Kit
can be ordered separately, or can be downloaded at:
http://www.hp.com/go/insightupdates.
NOTE: For additional license options please see the Insight Control
QuickSpecs at:
http://h18000.www1.hp.com/products/quickspecs/12631_div/12631_div.html
HP Insight Control for Linux
HP Insight Control for Linux including 1yr 24x7 Support Electronic License
TC213AAE
HP Insight Control for Linux including 1yr 24x7 Support Single Server
TC209A
License
HP Insight Control for Linux Media Kit
TC208A
NOTE: Media pack DVD contains the ISO image for HP Insight Control for
Linux, HP Systems Insight Manager, HP Insight Control power management,
HP Insight Control virtual machine management, and an integrated installer.
Servers must be acquired separately.
NOTE: Licenses ship without media. The Media Kit for Insight Control for
Linux can be ordered separately, or can be downloaded at:
http://www.hp.com/go/ic-linux (click on Download button).
NOTE: Electronic and Flexible-Quantity licenses can be used to purchase
multiple licenses with a single set of activation keys.
NOTE: For additional License Kits, including electronic licensing options,
please see the QuickSpecs at:
http://h18000.www1.hp.com/products/quickspecs/13019_div/13019_div.html
DA - 14328 Worldwide QuickSpecs — Version 2 — 6/8/2012
Page 34
QuickSpecs
HP ProLiant DL380e Generation 8 (Gen8)
Additional Options
HP iLO Advanced
License
High Performance
Clusters
HP I/O Accelerator
Options
HP Integrated Lights-Out (iLO) Advanced for ProLiant Remote
Management
HP iLO Advanced including 1yr 24x7 Technical Support and Updates Single
Server License
NOTE: For more information, visit: http://www.hp.com/go/ilo.
HP Cluster Management Utility
HP Insight Cluster Management Utility 1yr 24x7 Flexible License
HP Insight Cluster Management Utility 3yr 24x7 Flexible License
NOTE: These part numbers can be used to purchase one certificate for
multiple licenses and support with a single activation key. Each license is for
one node (server). Customer will receive a printed end user license
agreement and license entitlement certificate via physical shipment. The
license entitlement certificate must be redeemed online in order to obtain a
license key. Customer also will receive a support agreement.
HP Insight Cluster Management Utility Media
NOTE: For additional license kits please see the QuickSpecs at:
http://h18004.www1.hp.com/products/quickspecs/12612_div/12612_div.html
HP HPC Linux Value Pack
HP High Performance Computing Linux Value Pack 1 Processor Flexible
License
NOTE: This part number can be used to purchase one certificate for multiple
licenses with a single activation key. Each license is for one socket (a.k.a.
processor). Customer will receive a printed end user license agreement and
license entitlement certificate via physical shipment. The license entitlement
certificate must be redeemed online in order to obtain a license key.
HP High Performance Computing Linux Value Pack Media Kit
NOTE: This part number can be used to purchase media including software
and documentation, which will be delivered to the customer.
NOTE: For additional license kits please see the QuickSpecs at:
http://h18004.www1.hp.com/products/quickspecs/13485_div/13485_div.html
HP 160GB Single Level Cell PCIe ioDrive for ProLiant Servers
NOTE: A low-profile PCI bracket is included for use in low-profile slots.
HP 320GB Multi Level Cell PCIe ioDrive for ProLiant Servers
NOTE: A low-profile PCI bracket is included for use in low-profile slots.
HP 320GB Single Level Cell PCIe ioDrive Duo for ProLiant Servers
HP 640GB Multi Level Cell PCIe ioDrive Duo for ProLiant Servers
HP 1.28TB Multi Level Cell PCIe ioDrive Duo for ProLiant Servers
NOTE: Please see the QuickSpecs for Technical Specifications and
additional information:
http://h18000.www1.hp.com/products/quickspecs/13587_div/13587_div.html
(Worldwide)
DA - 14328 Worldwide QuickSpecs — Version 2 — 6/8/2012
512485-B21
QL803B
BD476A
BD477A
TC293B
TC294A
600278-B21
600279-B21
600281-B21
600282-B21
641027-B21
Page 35
QuickSpecs
HP ProLiant DL380e Generation 8 (Gen8)
Additional Options
HP Security
HP Storage
Controllers
HP Trusted Platform Module Option
NOTE: The TPM (Trusted Platform Module) is a microcontroller chip that can
securely store artifacts used to authenticate the server platform. These
artifacts can include passwords, certificates and encryption keys. Windows®
BitLocker™ Drive Encryption (BitLocker) is a data protection feature
available in Windows Server® 2008. BitLocker leverages the enhanced
security capabilities of a Trusted Platform Module (TPM) version 1.2. The
TPM works with BitLocker to help protect user data and to ensure that a
server running Windows Server 2008 has not been tampered with while the
system was offline. For more information about TPM, including a white
paper, go to: www.hp.com/go/TPM.
NOTE: ProLiant OS pre-installed units will come with the partition required
for TPM deployment.
NOTE: The TPM key is unique to every TPM deployed server and must be
retained. Misplacing or losing the key could result in data loss.
HP 2U Security Bezel Kit
488069-B21
666988-B21
SAS Controllers
Smart Array P222 Controller
HP Smart Array P222/512 FBWC 6Gb 1-port Int/1-port Ext SAS Controller
Smart Array P420 Controller
HP Smart Array P420/1GB FBWC 6Gb 2-ports Int SAS Controller
HP Smart Array P420/2GB FBWC 6Gb 2-ports Int SAS Controller
Smart Array P421 Controller
HP Smart Array P421/1GB FBWC 6Gb 2-ports Ext SAS Controller
HP Smart Array P421/2GB FBWC 6Gb 2-ports Ext SAS Controller
Smart Array P822 Controller
HP Smart Array P822/2GB FBWC 2-ports Int/4-ports Ext SAS Controller
Optional Upgrades
HP 2GB P-series Smart Array Flash Backed Write Cache
HP 512MB B-series 36 inch Dynamic Smart Array Flash Backed Write
Cache for ML/DLs
NOTE: This kit includes a cable and cache module that is used in
conjunction with the B320i controller.
HP Smart Array Advanced Pack 2.0 No Media 1 Server 1yr 24x7 Support
Software
HP Smart Array Advanced Pack 2.0 No Media Electronic Lic 1yr 24x7
Support Software
HP SAS License Key No Media 1 Svr 1yr 24x7 Support for B320i
NOTE: HP Dynamic Smart Array SAS License key for B320i only.
HP Smart Array Advanced Pack 2.0 No Media 1 Server 1yr 24x7 Support
Software
HP DL380e Gen8 Smart Array Cable Kit
NOTE: Please see the QuickSpecs for Technical Specifications and
additional information:
http://h18000.www1.hp.com/products/quickspecs/14227_div/14227_div.html
(Smart Array P222 Controller)
http://h18000.www1.hp.com/products/quickspecs/14228_div/14228_div.html
(Smart Array P420 Controller)
http://h18000.www1.hp.com/products/quickspecs/14229_div/14229_div.html
(Smart Array P421 Controller)
http://h18000.www1.hp.com/products/quickspecs/14341_div/14341_div.html
DA - 14328 Worldwide QuickSpecs — Version 2 — 6/8/2012
631667-B21
631670-B21
631671-B21
631673-B21
631674-B21
615418-B21
631681-B21
631922-B21
BC377A
BC390AAE
BC393A
BC377A
672250-B21
Page 36
QuickSpecs
HP ProLiant DL380e Generation 8 (Gen8)
Additional Options
(Smart Array P822 Controller)
http://h18000.www1.hp.com/products/quickspecs/13200_div/13200_div.html
(Smart Array Advanced Pack)
Host Bus Adapter
HP H220 Host Bus Adapter
HP H221 Host Bus Adapter
HP H222 Host Bus Adapter
NOTE: Please see the QuickSpecs for Technical Specifications and
additional information:
http://h18004.www1.hp.com/products/quickspecs/14336_div/14336_div.html
(HBA 220)
http://h18004.www1.hp.com/products/quickspecs/14222_div/14222_div.html
(HBA 221)
http://h18004.www1.hp.com/products/quickspecs/14337_div/14337_div.html
(HBA 222)
HP Power Cords
650933-B21
650931-B21
650926-B21
NOTE: HP ProLiant servers ships with an IEC-IEC power cord used for rack
mounting with Power Distribution Units (PDUs).
HP C13 - SEV 1011 CH 250V 10Amp 1.83m Power Cord
HP C13 - DK-2.5A DK 250V 10Amp 1.83m Power Cord
HP C13 - CEE-VII EU 250V 10Amp 1.83m Power Cord
HP C13 - BS-1363A UK/HK/SG 250V 10Amp 1.83m Power Cord
HP C13 - CEI-23-50 IT/CL 250V 10Amp 1.83m Power Cord
HP C13 - SABS-164 ZA 250V 10Amp 2.5m Power Cord
HP C13 - Nema 6-15P US 250V 15A JP 3.6m Power Cord
HP C13 - Nema 5-15P US/CA 110V 10Amp 1.83m Power Cord
AF565A
AF566A
AF568A
AF570A
AF571A
AF567A
A0N33A
AF556A
HP Cable Options
HP Premier Flex LC/LC Multi-mode OM4 2 fiber 15m Cable
HP Premier Flex LC/LC Multi-mode OM4 2 fiber 1m Cable
HP Premier Flex LC/LC Multi-mode OM4 2 fiber 2m Cable
HP Premier Flex LC/LC Multi-mode OM4 2 fiber 30m Cable
HP Premier Flex LC/LC Multi-mode OM4 2 fiber 50m Cable
HP Premier Flex LC/LC Multi-mode OM4 5 fiber 1m Cable
QK735A
QK732A
QK733A
QK736A
QK737A
QK734A
HP Backup &
Recovery Software
HP Data Protector Express
HP Basic Upgrade to Data Protector Express V6 for 1 Server E-LTU
HP Data Protector Express V6.0 for 10 Server E-LTU
HP Data Protector Express V6.0 for 1 Server E-LTU
HP Data Protector Express V6.0 for 3 Server E-LTU
NOTE: One of these Data Protector Express base products is required. To
see available options: http://www.hp.com/go/dataprotectorexpress
DA - 14328 Worldwide QuickSpecs — Version 2 — 6/8/2012
TC333BAE
TC332BAE
TC330BAE
TC331BAE
Page 37
QuickSpecs
HP ProLiant DL380e Generation 8 (Gen8)
Additional Options
HP Tape Backup
HP Disk Backup
NOTE: For the complete range of tape drives, autoloaders, libraries and
media see: http://www.hp.com/go/tape. For hardware and software
compatibility of HP tape backup products see:
http://www.hp.com/storage/SPOCK
HP 1/8 G2 Ultrium 920 SAS Autoloader
HP LTO-5 Ultrium 3000 SAS Tape Drive in 1U Rackmount
NOTE: Connection using HP Smart Array P222 Controller (631667-B21)
recommended.
HP MSL2024 1 LTO-5 Ultrium 3000 SAS Tape Library
HP MSL2024 Ultrium 920 SAS Tape Library
HP 1U USB Rack-Mount Kit
HP 1U SAS Rack Mount Kit
BL537A
AH559A
A8007B
AE459B
NOTE: For the complete range of RDX drives and media see:
http://www.hp.com/go/rdx. For hardware and software compatibility of HP
disk backup products see: http://www.hp.com/storage/SPOCK.
HP D2D Backup Systems with Backup Data Deduplication
HP D2D2502i Backup System
HP D2D2504i Backup System
HP RDX Removable Disk Backup Systems USB
HP RDX320 Internal Removable Disk Backup System
NOTE: For installation into 1U USB Rack-Mount Kit (A8007A). No peripheral
bay available for drive installation into the server. 320GB of disk capacity per
data cartridge
HP RDX500 Internal Removable Disk Backup System
NOTE: For installation into 1U USB Rack-Mount Kit (A8007A). No peripheral
bay available for drive installation into the server. 500GB of disk capacity per
data cartridge.
HP RDX1000 Internal Removable Disk Backup System
NOTE: For installation into 1U USB Rack-Mount Kit (A8007A). No peripheral
bay available for drive installation into the server. 1 TB of disk capacity per
data cartridge.
HP Storage Options
AH558A
EJ014A
Storage Fibre Channel HBA
NOTE: For the complete listing of Fibre Channel Host Bus Adapters for
Windows 2000, Windows Server 2003 and Linux, please see:
http://h18006.www1.hp.com/storage/saninfrastructure/hba.html
Brocade Fibre Channel HBAs
HP 81B 8Gb 1-port PCIe Fibre Channel Host Bus Adapter
HP 82B 8Gb 2-port PCIe Fibre Channel Host Bus Adapter
Emulex Fibre Channel HBAs
HP 81E 8Gb 1-port PCIe Fibre Channel Host Bus Adapter
HP 82E 8Gb 2-port PCIe Fibre Channel Host Bus Adapter
QLogic Fibre Channel HBAs
HP 81Q 8Gb 1-port PCIe Fibre Channel Host Bus Adapter
HP 82Q 8Gb 2-port PCIe Fibre Channel Host Bus Adapter
Converged Network Adapter
HP CN1100E Dual Port Converged Network Adapter
HP CN1000Q Dual Port Converged Network Adapter
DA - 14328 Worldwide QuickSpecs — Version 2 — 6/8/2012
EJ001C
EJ002C
AJ767A
AJ934A
BV847A
AP769A
AP770A
AJ762A
AJ763A
AK344A
AJ764A
BK835A
BS668A
Page 38
QuickSpecs
HP ProLiant DL380e Generation 8 (Gen8)
Additional Options
HP Disk Storage
Systems
HP Uninterruptible
Power Systems
Disk Enclosures
HP D2000 Disk Enclosures
HP D2600 Disk Enclosure
HP D2700 Disk Enclosure
NOTE: Please see the QuickSpecs for additional options and configuration
information at:
http://h18000.www1.hp.com/products/quickspecs/13404_div/13404_div.html
HP Rack-mountable UPS
HP R1500 G3 Uninterruptible Power Supply (UPS)
HP R1.5kVA G3 1U NA Uninterruptible Power System
HP R1.5kVA G3 1U JP/TW Uninterruptible Power System
HP R1.5kVA G3 1U INTL Uninterruptible Power System
NOTE: Please see the QuickSpecs for additional information:
http://h18000.www1.hp.com/products/quickspecs/14059_div/14059_div.html
(Worldwide)
HP R/T3000 G2 Uninterruptible Power System (UPS)
HP R/T3000 G2 2U L530 Low Voltage NA/JP Uninterruptible Power System
HP R/T3000 G2 2U L620 High Voltage NA/JP Uninterruptible Power System
HP R/T3000 G2 2U Detachable Cord High Voltage INTL Uninterruptible Power
System
NOTE: Please see the QuickSpecs for additional information:
http://h18000.www1.hp.com/products/quickspecs/14058_div/14058_div.html
(Worldwide)
NOTE: For additional information on HP Uninterruptible Power Systems please
go to: www.hp.com/servers/rackups.
NOTE: For additional information on sizing your server, please reference:
http://www.upssizer.com.
NOTE: Please see the UPS and PDU cable matrix's on the HP Power Protection
and Management page. Under Power Cords, click on the "HP Power Cord
Matrix" link. That link will list cable descriptions, requirements, and specifications
for UPS and PDU units. Please see the following link:
www.hp.com/products/powercords.
HP Power Distribution Monitored PDUs
Units
HP Monitored Power Distribution Unit: Full Rack Version
HP 17.3kVA 24A Dual Three Phase NA/JP Monitored Power Distribution Unit
HP 8.6kVA 24A Single Input Three Phase NA/JP Monitored Power Distribution
Unit
HP 16.6kVA 40A Dual Input Single Phase NA/JP Monitored Power Distribution
Unit
HP 8.3kVA 40A Single Input Single Phase NA/JP Monitored Power Distribution
Unit
HP 22.1kVA 16A Dual Input Three Phase INTL Monitored Power Distribution
Unit
HP 11kVA 16A Single Input Three Phase INTL Monitored Power Distribution
Unit
HP 14.7kVA 32A Dual Input Single Phase INTL Monitored Power Distribution
Unit
DA - 14328 Worldwide QuickSpecs — Version 2 — 6/8/2012
AJ940A
AJ941A
AF469A
AF470A
AF471A
AF466A
AF467A
AF468A
AF503A
AF504A
AF505A
AF506A
AF507A
AF508A
AF509A
Page 39
QuickSpecs
HP ProLiant DL380e Generation 8 (Gen8)
Additional Options
HP 7.3kVA 32A Single Input Single Phase INTL Monitored Power Distribution
Unit
HP Monitored Power Distribution Unit: Half Rack Version
HP 4.9kVA 24A Single Input Single Phase NA/JP Monitored Power Distribution
Unit
HP 7.3kVA 32A Single Input Three Phase INTL Intelligent Modular Power
Distribution Unit
HP 17.3kVA 48A Single Input Three Phase NA/JP Monitored Power Distribution
Unit
HP 7.3kVA 32A Single Input Single Phase INTL Monitored Power Distribution
Unit
HP 22kVA 32A Single Input Three Phase INTL Monitored Power Distribution
Unit
NOTE: Please see the QuickSpecs for Technical Specifications and additional
information:
http://h18000.www1.hp.com/products/quickspecs/12118_div/12118_div.html
Modular PDUs 1U/0U
NOTE: 1U/0U mounting brackets shipped with the unit (optimized for 10000 G2
and 9000 series racks).
HP 3.6kVA 16A High Voltage INTL Modular Power Distribution Unit
HP 4.9kVA 24A High Voltage NA/JP Modular Power Distribution Unit
HP 8.3kVA 40A High Voltage INTL Modular Power Distribution Unit
HP 8.3kVA 40A High Voltage NA/JP Modular Power Distribution Unit
HP 7.3kVA 32A High Voltage INTL Modular Power Distribution Unit
HP 9.2kVA 40A High Voltage INTL Modular Power Distribution Unit
HP 22kVA 32A Three Phase INTL Core Modular Power Distribution Unit
NOTE: For additional information on HP Power Distribution Units including
accessories please go to: www.hp.com/go/pdu.
NOTE: Please see the UPS and PDU cable matrix's on the HP Power Protection
and Management page. Under Power Cords, click on the "HP Power Cord
Matrix" link. That link will list cable descriptions, requirements, and specifications
for UPS and PDU units. Please see the following link:
www.hp.com/products/powercords.
NOTE: This PDU has a detachable input power cord and allows for adaptability
to country specific power requirements.
NOTE: Please see the following QuickSpecs for additional options including
shorter jumper cables and country specific power cords:
http://h18000.www1.hp.com/products/quickspecs/11041_div/11041_div.html
(Worldwide)
DA - 14328 Worldwide QuickSpecs — Version 2 — 6/8/2012
AF510A
AF914A
AF536A
AF916A
AF915A
AF917A
252663-B24
252663-D72
252663-B21
252663-D73
252663-B31
252663-B32
AF518A
Page 40
QuickSpecs
HP ProLiant DL380e Generation 8 (Gen8)
Additional Options
HP Intelligent Power
Distribution Units
(iPDU)
iPDU Core Units
HP 4.9kVA 24A Single Phase NA/JP Core Intelligent Modular Power Distribution
Unit
HP 8.3kVA 40A Single Phase NA/JP Core Intelligent Modular Power Distribution
Unit
HP 8.6kVA 24A Three Phase NA/JP Core Intelligent Modular Power Distribution
Unit
HP 14.4kVA 40A Three Phase NA/JP Intelligent Modular Power Distribution Unit
HP 17.3kVA 48A Three Phase NA/JP Core Intelligent Modular Power
Distribution Unit
HP 11.4kVA 16A 415V Three Phase L22-20 NA Core Intelligent Power
Distribution Unit
HP 17.3kVA 24A 415V Three Phase L22-30 NA Core Intelligent Power
Distribution Unit
HP 17.3kVA 24A 415V Three Phase IEC309 NA Core Intelligent Power
Distribution Unit
HP 7.3kVA 32A Single Phase INTL Core Intelligent Modular Power Distribution
Unit
HP 11kVA 16A Three Phase INTL Core Intelligent Modular Power Distribution
Unit
HP 22kVA 32A Three Phase INTL Core Intelligent Modular Power Distribution
Unit
HP 17.3kVA 48A 208V Three Phase 12 Outlet Core NA/JP Intelligent Power
Distribution Unit
HP 17.3kVA 24A 415V Three Phase 12 Outlet Core NA/JP Intelligent Power
Distribution Unit
HP 22kVA 32A 400V Three Phase 12 Outlet Core INTL Intelligent Power
Distribution Unit
iPDU Kits with Standard Extension Bars
HP 4.9kVA 24A Single Phase NA/JP Intelligent Modular Power Distribution Kit
HP 8.6kVA 24A Three Phase NA/JP Intelligent Modular Power Distribution Kit
HP 7.3kVA 32A Single Phase INTL Intelligent Modular Power Distribution Kit
iPDU Extension Bars
HP 5xC13 Outlets Power and UID LEDs Pair Standard Extension Bar
NOTE: Please see the QuickSpecs for Technical Specifications and additional
information:
http://h18000.www1.hp.com/products/quickspecs/13650_div/13650_div.html
(Worldwide)
DA - 14328 Worldwide QuickSpecs — Version 2 — 6/8/2012
AF520A
AF521A
AF522A
AF533A
AF523A
AF900A
AF902A
AF901A
AF525A
AF526A
AF527A
AF535A
AF537A
AF538A
AF531A
AF532A
AF534A
AF528A
Page 41
QuickSpecs
HP ProLiant DL380e Generation 8 (Gen8)
Additional Options
HP Rack Series
HP Rack Options
HP Rack 10000 G2 Series (Carbon/Graphite Metallic)
HP 10642 G2 1200mm deep Shock Rack
HP 10647 G2 1200mm deep Shock Rack
NOTE: It is mandatory to use a shock pallet when shipping racks with equipment
installed.
NOTE: Please see the QuickSpecs for Technical Specifications and additional
information:
http://h18000.www1.hp.com/products/quickspecs/12402_div/12402_div.html
(Worldwide)
NOTE: For additional information regarding Rack Cabinets, please see the
following URL: http://www.hp.com/go/rackandpower.
NOTE: The increasing power of new high-performance processor technology
requires increased cooling efficiency for rack-mounted servers. The 10000 G2
Series Racks provide enhanced airflow for maximum cooling, allowing these
racks to be fully loaded with servers using the latest processors.
CAUTION: If a third-party rack is used, observe the following additional
requirements to ensure adequate airflow and to prevent damage to the
equipment: Front and rear doors: If your 42U server rack includes closing front
and rear doors, you must allow 830 square inches (5,350 sq cm) of hole evenly
distributed from top to bottom to permit adequate airflow (equivalent to the
required 64 percent open area for ventilation). Side: The clearance between the
installed rack component and the side panels of the rack must be a minimum of
2.75 inches (7 cm).
CAUTION: Always use blanking panels to fill all remaining empty front panel Uspaces in the rack. This arrangement ensures proper airflow. Using a rack
without blanking panels results in improper cooling that can lead to thermal
damage.
NOTE: Quick deploy rail system provides tool-free support for racks with square
or round mounting holes (including Compaq/HP 7000, 9000, 10000 G2 and HP
series), with an adjustment range of 24" - 36". The ambidextrous cable
management arm can be mounted on either the left or right side for improved
cable management.
NOTE: High Airflow Inserts (High Air Flow Rack Door Insert for the 7142 Rack
(single) - PN: 327281-B21; or High Air Flow Rack Door Insert for the 7142 Rack
(6-pack) - PN: 327281-B22) are required to support the server in the 7000 series
racks. The DL380e Cable Management Arm is not supported on 7000 series
racks.
NOTE: Cable management arm must be removed to access hot-plug power
supplies when the cable management arm is mounted on the right.
HP USB Keyboard and Mouse
HP USB BFR-PVC US Keyboard/Mouse Kit
HP USB BFR with PVC Free UK Keyboard/Mouse Kit
HP USB BFR with PVC Free FR Keyboard/Mouse Kit
HP USB BFR with PVC Free ES Keyboard/Mouse Kit
HP USB BFR with PVC Free DE Keyboard/Mouse Kit
HP USB BFR with PVC Free JP Keyboard/Mouse Kit
HP USB BFR with PVC Free IT Keyboard/Mouse Kit
HP USB BFR with PVC Free CN Keyboard/Mouse Kit
HP USB BFR with PVC Free AE Keyboard/Mouse Kit
HP USB BFR with PVC Free RU Keyboard/Mouse Kit
HP USB BFR with PVC Free AP-Intl Keyboard/Mouse Kit
HP USB BFR with PVC Free Intl Keyboard/Mouse Kit
DA - 14328 Worldwide QuickSpecs — Version 2 — 6/8/2012
AF092A
AF094A
631341-B21
631344-B21
631346-B21
631348-B21
631358-B21
631360-B21
631362-B21
631364-B21
638212-B21
638214-B21
672097-373
672097-B33
Page 42
QuickSpecs
HP ProLiant DL380e Generation 8 (Gen8)
Additional Options
HP USB BFR with PVC Free PT Keyboard/Mouse Kit
HP USB BFR with PVC Free TR Keyboard/Mouse Kit
HP USB BFR with PVC Free CZ Keyboard/Mouse Kit
HP USB BFR with PVC Free FI Keyboard/Mouse Kit
HP USB BFR with PVC Free SE Keyboard/Mouse Kit
HP USB BFR with PVC Free CH Keyboard/Mouse Kit
HP USB BFR with PVC Free KR Keyboard/Mouse Kit
HP USB BFR with PVC Free IN Keyboard/Mouse Kit
NOTE: Please see the QuickSpecs for Technical Specifications and
additional information:
http://h18000.www1.hp.com/products/quickspecs/13972_div/13972_div.html
(Worldwide)
HP Server Console Switches
HP Server Console 0x2x8 Port Analog Switch
HP Server Console 0x2x16 Port Analog Switch
NOTE: Please see the QuickSpecs for Technical Specifications and
additional information:
http://h18000.www1.hp.com/products/quickspecs/11834_div/11834_div.html
(Worldwide)
HP Server Console Switch G2 with Virtual Media & CAC
HP 0x2x16 KVM Server Console Switch G2 with Virtual Media CAC
Software
HP 0x2x32 KVM Server Console Switch G2 with Virtual Media CAC
Software
NOTE: Please see the QuickSpecs for Technical Specifications and
additional information:
http://h18000.www1.hp.com/products/quickspecs/13475_div/13475_div.html
(Worldwide)
HP IP Console Switch G2 with Virtual Media & CAC
HP 1x1Ex8 KVM IP Console Switch G2 with Virtual Media CAC Software
HP 2x1Ex16 KVM IP Console Switch G2 with Virtual Media CAC Software
HP 4x1Ex32 KVM IP Console Switch G2 with Virtual Media CAC Software
NOTE: Please see the QuickSpecs for Technical Specifications and
additional information:
http://h18000.www1.hp.com/products/quickspecs/13474_div/13474_div.html
(Worldwide)
Rail Kits
HP 2U Large Form Factor Ball Bearing Gen8 Rail Kit
NOTE: The 2U Ball bearing Rail Kit comes with ambidextrous cable
management arm can be mounted on either the left or right side for
improved cable management.
HP 2U Small Form Factor Ball Bearing Gen8 Rail Kit
NOTE: The 2U Ball bearing Rail Kit comes with ambidextrous cable
management arm can be mounted on either the left or right side for
improved cable management.
HP Rack Cable Management Velcro Clips
DA - 14328 Worldwide QuickSpecs — Version 2 — 6/8/2012
672097-133
672097-143
672097-223
672097-353
672097-103
672097-113
672097-KD3
672097-D63
AF616A
AF617A
AF618A
AF619A
AF620A
AF621A
AF622A
663480-B21
663478-B21
379820-B21
Page 43
QuickSpecs
HP ProLiant DL380e Generation 8 (Gen8)
Additional Options
HP USB and SD
Options
HP Care Pack
Services
HP 4GB Secure Digital High Capacity Flash Media Kit
NOTE: Blank SD media device is supported for use with VMware and Citrix.
SD media must be installed in the internal slot of the ProLiant server. Learn
more at: http://www.hp.com/go/proliantvirtualization.
HP 2GB USB Flash Media Drive Key Kit
NOTE: HP qualified blank USB key for use with HP ProLiant servers that
support the VMware virtualization environment and other HP value-add
software like SmartStart. HP recommends this industry standard USB flash
device for use with VMware ESXi. USB device must be installed in the
internal slot of the ProLiant server for use with VMware ESXi. Refer to HP
VMware Getting Started Guide for installation instructions.
580387-B21
608447-B21
HP Install DL380e Service
HP Install nonStdHrs DL380e SVC
HP Startup DL380e Service
HP Startup nonStd Hrs DL380e Svc
HP 3y 24h CTR 24x7 DL380e HW Sup
HP 3y 24h CTR 24x7 wDMR DL380e HW Sup
U6E81E
U6E82E
U6E83E
U6E84E
U6E85E
U6E86E
HP 3y 4h 13x5 DL380e HW Support
HP 3y 4h 24x7 DL380e Collab Support
HP 3y 4h 24x7 DL380e HW Support
HP 3y 4h 24x7 DL380e ProCare Service
HP 3y 4h 24x7 w/DMR DL380e Collab Supp
HP 3y 4h 24x7w/DMR DL380e ProCare SVC
HP 3y 4h13x5 w/DMR DL380e HW Supp
HP 3y 4h24x7 w/DMR DL380e HW Supp
HP 3y 6h CTR 24x7 DL380e Collab Support
HP 3y 6h CTR 24x7 DL380e HW Supp
HP 3y 6h CTR 24x7 DL380e ProCare SVC
HP 3y 6h CTR 24x7 w/DMR DL380e HW Sup
HP 3y 6hCTR 24x7 w/DMR DL380e Collab Sup
HP 3y Nbd DL380e Collab Support
HP 3y Nbd DL380e HW Support
HP 3y Nbd DL380e ProCare Service
HP 3y Nbd w/DMR DL380e Collab Support
HP 3y Nbd w/DMR DL380e HW Support
HP 3y Nbd w/DMR DL380e ProCare SVC
HP 3y6hCTR24x7w/DMR DL380e ProCare SVC
NOTE: For more information, customer/resellers can contact:
http://www.hp.com/services/carepack
U6E27E
U6E31E
U6E29E
U6E33E
U6E32E
U6E34E
U6E28E
U6E30E
U6E37E
U6E35E
U6E39E
U6E36E
U6E38E
U6E23E
U6E21E
U6E25E
U6E24E
U6E22E
U6E26E
U6E40E
DA - 14328 Worldwide QuickSpecs — Version 2 — 6/8/2012
Page 44
QuickSpecs
HP ProLiant DL380e Generation 8 (Gen8)
Memory
For detailed memory configuration rules and guidelines, please use the Online DDR3 Memory Configuration Tool:
www.hp.com/go/ddr3memory-configurator
Memory Subsystem Architecture
Each Intel® Xeon® E5-2400 family processor socket contains three memory channels that support two DIMMs each for a
total of six (6) DIMM per installed processor or a grand total of twelve (12) DIMMs for the server. Up to 32GB capacity
DIMMs are supported for 384GB of memory (12 DIMM slots x 32GB per DIMM).
Memory population guidelines
General Memory Population Rules and Guidelines:
White DIMM slots denote the first slot of a channel. For 1 DPC (DIMM per channel) populate white slots only.
Install DIMMs only if the corresponding processor is installed.
If only one processor is installed in a two processor system, only half of the DIMM slots are available.
To maximize performance, it is recommended to balance the total memory capacity between all installed processors
and to load the channels similarly whenever possible.
Populate DIMMs from heaviest load (quad-rank) to lightest load (single-rank) within a channel. Heaviest load (DIMM
with most ranks) within a channel goes furthest from the processor
RDIMMs operating at either 1.35V or 1.5V may be mixed in any order, but the system will power them at the higher
voltage.
Do not mix RDIMMs, LRDIMMs, and UDIMMs.
DIMMs of different speeds may be mixed in any order; the server will select a common optimal speed.
The maximum memory speed is a function of the memory type, memory configuration, and processor model.
The maximum memory capacity is a function of the memory type and number of installed processors.
HP memory from previous generation servers is not qualified on the DL380e Gen8 Server. Certain HP SmartMemory
features such as memory authentication and enhanced performance may not be supported.
To realize the performance memory capabilities listed in this document, HP SmartMemory is required. For additional
information, please see the HP SmartMemory QuickSpecs at:
http://h18000.www1.hp.com/products/quickspecs/14225_div/14225_div.html.
For memory population rules and additional memory guidelines, please see the DL380e Gen8 user guide at
http://www.hp.com/support.
There are three(3) Memory channels per processor; six(6) channels for 2 processors server.
There are two(2) DIMM slots for each memory channel; twelve(12) total slots for 2 processors server.
DA - 14328 Worldwide QuickSpecs — Version 2 — 6/8/2012
Page 45
QuickSpecs
HP ProLiant DL380e Generation 8 (Gen8)
Memory
Gen8 Supported Memory Bandwidth and Capacity
DIMM Type
Registered DIMMS
(RDIMMs)
Load
Reduced
(LRDIMMs)
DIMM Rank
DIMM Capacity
DIMM Native
Speed (MHz)
Voltage
Single Rank (1R)
4GB
4GB
8GB
1333
1600
1600
LV
Std
Dual Rank (2R)
8GB
16GB
16GB
1333
1333
1600
Unbuffered with ECC
DIMMs (UDIMMs)
Quad
Rank (4R)
32GB
1333
Single
Rank
(1R)
2GB
1333
Dual Rank (2R)
4GB
8GB
1333
1333
Std
LV
LV
Std
LV
LV
LV
LV
SLOTS THAT CAN BE POPULATED
12 slot servers
12
12
12
12
12
12
12
12
12
12
MAXIMUM CAPACITY (GB)1
48
48
96
96
192
192
384
24
48
96
POPULATED DIMM SPEED (MHz)
1 DIMM Per
1333
1600
1600
1333
1333
1600
13333
1333
1333
1333
Channel
2 DIMM Per
1333
1600
1600
1333
1333
1600
13333
13334
13334
13334
Channel
1 Maximum capacity will vary based on individual server platform qualification schedule
3 LRDIMM enables 2 DIMMs per channel. HP SmartMemory will supports up to 2DPC@1333 at 1.35V. Third party
memory may only support 2DPC @1066 at 1.5V.
4 For HP SmartMemory, UDIMM is supported at 2DPC@1333 at 1.35V. Third party memory may only support up to
2DPC@1066 at 1.5V.
Memory Speed by Processor Model
Supported Memory
Speeds
1600/1333/1066MHz
1333/1066MHz
1066MHz
Processor Models
E5 2470 E5-2450, E5-2450L
E5-2440, E5-2430, E5-2420, E5-2430L
E5-2407, E5-2403
Standard and Maximum Memory Capacity (Pre-configured Models)
Pre Configured Models
Standard Memory
Intel Xeon E5-2450
Intel Xeon E5-2407
Intel Xeon E5-2403
24GB (6x 4GB)
8GB (2x 4GB)
4GB (1x 4GB)
Maximum Memory Plus
Optional Memory
120GB (6x 16GB, 6x 4GB)
168GB (10x16GB, 2x4GB)
180GB (11x16GB, 1x4GB)
Standard Memory Replaced
with Optional Memory
384GB (12 x 32GB)
384GB (12 x 32GB)
384GB (12 x 32GB)
BASIC memory slot & population diagram
Population order; looking from the front of your server CPU#1 is on right side and CPU#2 is on the left. See the population
order by alphabetic and numeric progression below.
CPU #1 IS PROCESSOR ON RIGHT - LOOKING FROM FRONT OF SERVER
Channel 1
Channel 2
Channel 3
slot #
1
2
3
4
5
6
population order
A
D
B
E
C
F
In Order
1
4
2
5
3
6
DA - 14328 Worldwide QuickSpecs — Version 2 — 6/8/2012
CPU #1
Page 46
QuickSpecs
HP ProLiant DL380e Generation 8 (Gen8)
Memory
slot #
population order
In Order
CPU #2 IS PROCESSOR ON LEFT - LOOKING FROM FRONT OF SERVER
Channel 1
Channel 2
Channel 3
1
2
3
4
5
6
A
D
B
E
C
F
1
4
2
5
3
6
CPU #2
-
NOTE: Capacity references are rounded to the common Gigabyte values.
1GB = 1024MB
2GB = 2048MB
4GB = 4096MB
8GB = 8192MB
16GB = 16384MB
32GB = 32768MB
DDR3 memory options part number decoder
Following are memory options available from HP:
HP Memory
NOTE: To realize the performance memory capabilities listed in this document,
HP SmartMemory is required. For additional information, please see the HP
SmartMemory QuickSpecs at:
http://h18000.www1.hp.com/products/quickspecs/14225_div/14225_div.html
(Worldwide)
NOTE: HP memory from previous generation servers are not fully compatible
with the DL360e Gen8 Server.
Registered DIMMs (RDIMMs)
HP 4GB (1x4GB) Single Rank x4 PC3L-10600R (DDR3-1333) Registered CAS-9
Low Voltage Memory Kit
HP 4GB (1x4GB) Single Rank x4 PC3-12800R (DDR3-1600) Registered CAS-11
Memory Kit
HP 8GB (1x8GB) Dual Rank x4 PC3L-10600R (DDR3-1333) Registered CAS-9
Low Voltage Memory Kit
HP 8GB (1x8GB) Single Rank x4 PC3-12800R (DDR3-1600) Registered CAS-11
Memory Kit
HP 8GB (1x8GB) Dual Rank x4 PC3-12800R (DDR3-1600) Registered CAS-11
Memory Kit
HP 16GB (1x16GB) Dual Rank x4 PC3L-10600R (DDR3-1333) Registered CAS9 Low Voltage Memory Kit
HP 16GB (1x16GB) Dual Rank x4 PC3-12800R (DDR3-1600) Registered CAS11 Memory Kit
DA - 14328 Worldwide QuickSpecs — Version 2 — 6/8/2012
647893-B21
647895-B21
647897-B21
647899-B21
690802-B21
647901-B21
672631-B21
Page 47
QuickSpecs
HP ProLiant DL380e Generation 8 (Gen8)
Memory
Unbuffered with ECC DIMMs (UDIMMs)
HP 2GB (1x2GB) Single Rank x8 PC3-12800E (DDR3-1600) Unbuffered CAS11 Memory Kit
HP 2GB (1x2GB) Single Rank x8 PC3L-10600E (DDR3-1333) Unbuffered CAS9 Low Voltage Memory Kit
HP 4GB (1x4GB) Dual Rank x8 PC3-12800E (DDR3-1600) Unbuffered CAS-11
Memory Kit
HP 4GB (1x4GB) Dual Rank x8 PC3L-10600E (DDR3-1333) Unbuffered CAS-9
Low Voltage Memory Kit
HP 8GB (1x8GB) Dual Rank x8 PC3-12800E (DDR3-1600) Unbuffered CAS-11
Memory Kit
HP 8GB (1x8GB) Dual Rank x8 PC3L-10600E (DDR3-1333) Unbuffered CAS-9
Low Voltage Memory Kit
Load Reduced DIMMs (LRDIMMs)
HP 32GB (1x32GB) Quad Rank x4 PC3L-10600L (DDR3-1333) Load Reduced
CAS-9 Low Voltage Memory Kit
NOTE: All DDR3 memory option kits consist of one DIMM per kit. For detailed
memory configuration rules and guidelines, please use the Online DDR3
Memory Configuration Tool: www.hp.com/go/ddr3memory-configurator.
NOTE: PC3L is a low voltage memory.
DA - 14328 Worldwide QuickSpecs — Version 2 — 6/8/2012
669320-B21
647905-B21
669322-B21
647907-B21
669324-B21
647909-B21
647903-B21
Page 48
QuickSpecs
HP ProLiant DL380e Generation 8 (Gen8)
Storage
A
1-8
A
Optical Media Bay optional
8 x SFF SATA/SAS/SDD Hot Pluggable Hard
Drive Bays
Optical Media Bay optional
1-8
8 x LFF SATA/SAS/SDD Hot Pluggable Hard
Drive Bays
1-25
25 x SFF SATA/SAS/SDD Hot Pluggable Hard
Drive Bays
1-4,
1-4,
1-4
12 x LFF (1:1) SATA/SAS/SDD Hot Pluggable
Hard drive bays with point to point backplane
Maximum Storage Capacity - (with D2700, SAS/SATA HDD)
Internal
27TB (27 x 1TB SAS/SATA SFF with 25SFF drive cage + Rear 2SFF drive cage)
(25 SFF Drive Cage)
Internal
42TB (14 x 3TB SAS/SATA LFF with 12LFF drive cage + Rear 2LFF drive cage)
(12 LFF Drive Cage)
External
200TB (200 x 1TB SAS SFF)
Total
227TB
(25 SFF Drive)
Total
242TB
(12 LFF Drive)
DA - 14328 Worldwide QuickSpecs — Version 2 — 6/8/2012
Page 49
QuickSpecs
HP ProLiant DL380e Generation 8 (Gen8)
Technical Specifications
System Unit
Dimensions - with
bezel (H x W x D)
Weight (approximate)
Input Requirements
(per power supply)
BTU Rating
Power Supply Output
(per power supply)
SFF Drives: 3.44 x 17.54 x 27.5 in (8.75 x 44.55 x 69.85 cm)
LFF Drives: 3.44 x 17.54 x 29.5 in (8.75 x 44.55 x 74.94 cm)
Maximum
71.20 lb (32.30 kg)
(all hard drives: front +
rear,full power supply,
and processor installed)
Minimum
30.80 lb (14.00 kg)
(one SFF hard drive,
single power supply, and
processor installed. HDD
not installed)
Rated Line Voltage
100 to 120 VAC
200 to 240 VAC
Rated Input Current
For 1200 W Power Supply:
10 A (at 100 VAC),
4.9 A (at 200 VAC)
For 750 W Power Supply:
8.9 A (at 100 VAC),
4.3 A (at 200 VAC)
For 460 W Power Supply:
5.5 A (at 100 VAC),
2.6 A (at 200 VAC)
Rated Input Frequency 50 to 60 Hz
Rated Input Power
For 1200 W Power Supply:
930 W (at 100 VAC),
1348 W (at 200 VAC)
For 750 W Power Supply:
857 W (at 100 VAC),
824 W (at 200 VAC)
For 460 W Power Supply:
526 W (at 100 VAC),
505 W (at 200 VAC)
Maximum
For 1200 W Power Supply:
3530 BTU/hr (at 100 VAC),
4600 BTU/hr (at 200 VAC)
For 750 W Power Supply:
2925 BTU/hr (at 100 VAC),
2812 BTU/hr (at 200 VAC)
For 460 W Power Supply:
1794 BTU/hr (at 100 VAC),
1725 BTU/hr (at 200 VAC)
Rated Steady-State
For 1200 W Power Supply:
Power
800 W (at 100 VAC),
900 W (at 120 VAC),
1200 W (at 200 to 240 VAC)
For 750 W Power Supply:
750 W (at 100 to 120 VAC),
750 W (at 200 to 240 VAC)
For 460 W Power Supply:
460 W (at 100 to 120 VAC),
460 W (at 200 to 240 VAC)
Maximum Peak Power For 1200 W Power Supply:
800 W (at 100 VAC),
900 W (at 120 VAC),
1200 W (at 200 to 240 VAC)
DA - 14328 Worldwide QuickSpecs — Version 2 — 6/8/2012
Page 50
QuickSpecs
HP ProLiant DL380e Generation 8 (Gen8)
Technical Specifications
System Inlet
Temperature
Relative Humidity
(non-condensing)
Altitude
Acoustic Noise
Emissions
Classification (EMC)
For 750 W Power Supply:
750 W (at 100 to 120 VAC),
750 W (at 200 to 240 VAC)
For 460 W Power Supply:
460 W (at 100 to 120 VAC),
460 W (at 200 to 240 VAC)
Operating
10° to 35°C (50° to 95°F) at sea level with an
altitude derating of 1.0°C per every 304.8 m
(1.8°F per every 1000 ft) above sea level to a
maximum of 3048 m (10,000 ft), no direct
sustained sunlight. Maximum rate of change
is 10°C/hr (18°F/hr). The upper limit may be
limited by the type and number of options
installed.
System performance may be reduced if
operating with a fan fault or above 30°C
(86°F).
Non-operating
-30° to 60°C (-22° to 140°F). Maximum rate of
change is 20°C/hr (36°F/hr).
Operating
10 to 90% relative humidity (Rh), 28°C
(82.4°F) maximum wet bulb temperature, noncondensing.
Non-operating
5 to 95% relative humidity (Rh), 38.7°C
(101.7°F) maximum wet bulb temperature,
non-condensing.
Operating
3048 m (10,000 ft). This value may be limited
by the type and number of options installed.
Maximum allowable altitude change rate is
457 m/min (1500 ft/min).
Non-operating
9144 m (30,000 ft). Maximum allowable
altitude change rate is 457 m/min (1500
ft/min).
Listed are the declared A-Weighted sound power levels (LWAd) and
declared average bystander position A-Weighted sound pressure levels
(LpAm) when the product is operating in a 23°C ambient environment.
Noise emissions were measured in accordance with ISO 7779 (ECMA
74) and declared in accordance with ISO 9296 (ECMA 109).
NOTE: The Listed sound levels apply to standard shipping
configurations. Additional options may result in increased sound levels.
Idle
1P Non- Redundant 2P Redundant
SKU
SKU
LWAd
5.8 B
5.4 B
LpAm
41 dBA
38 dBA
Operating
1P SKU
2P SKU
LWAd
5.9 B
5.7 B
LpAm
42 dBA
41 dBA
FCC Rating
Class A
Normative Standards
CISPR 22; EN55022; EN55024; FCC CFR 47,
Pt 15; ICES-003; CNS14336-1; CNS13438;
GB4943; GB9254; EN 61000-3-2; EN 610003-3; EN 60950-1; IEC 60950-1
DA - 14328 Worldwide QuickSpecs — Version 2 — 6/8/2012
Page 51
QuickSpecs
HP ProLiant DL380e Generation 8 (Gen8)
Technical Specifications
NOTE: Product conformance to cited product specifications is based on
sample (type) testing, evaluation, or assessment. This product or family
of products is eligible to bear the appropriate compliance logos and
statements.
NOTE: The Listed sound levels apply to standard shipping
configurations. Additional options may result in increased sound levels.
HP iLO 4 On System
Management
Architecture
Processor
Upgradeability
Video Support
Interfaces
PCI Express based health and remote management ASIC
Embedded ARM processor core operating at 400MHz
Firmware upgradeable via Flash ROM
1920 x 1200 (16 bpp) DVR max resolution
HP iLO Dedicated* Network connection (10/100/1000 Mb/s) on rack,
tower and SL systems
*Optional Module on some servers
HP iLO Shared Network connection (10/100/1000 Mb/s) on rack, tower
and SL systems
HP iLO network connection to blades (100 Mb/s) to Onboard
Administrator (with 10/100/1000 Mb/s uplink) on blade systems
Memory
16 MB Flash
256 MB DDR 3 with ECC (112 MB after ECC and video)
Operating System
For information on HP's Certified and Supported ProLiant Servers for
Support
OS and Virtualization Software and latest listing of software drivers
available for your server including how to purchase from HP, please visit
our OS Support Site at: http://www.hp.com/go/ossupport
Client System Support For information on Client System Support, please visit the HP iLO
Feature Comparison Site at: www.hp.com/go/compareilo
Client Browser Support Microsoft Internet Explorer 9
NOTE: For customers using Protected Mode, please use the Java
based version of Integrated Remote Console.
Microsoft Internet Explorer 8
NOTE: For customers using Protected Mode, please use the Java
based version of Integrated Remote Console.
Microsoft Internet Explorer 7
Firefox Extended Support Release (ESR) 10 (on supported Windows
and Linux systems
Firefox 3.6 (on supported Windows and Linux systems)
Command Line
Secure Shell and serial port access
Support
Secure Socket Layer
Secure Shell version 2
Security
Advanced Encryption Standard (AES) and Triple Data Encryption
Standard (3DES) on browser, CLP and XML scripting interface
AES encryption of video
RC4 encryption of video
Directory Support
Active Directory v1.0 (Windows 2003)
Services
Driver Support
HP ProLiant iLO 4 Management Controller Driver Package
Management protocols SNMP, IPMI 2.0 (system and LAN interface), DMTF Systems
supported
Management Architecture for Server Hardware Command Line Protocol
(SMASH CLP), HP RIBCL XML
DA - 14328 Worldwide QuickSpecs — Version 2 — 6/8/2012
Page 52
QuickSpecs
HP ProLiant DL380e Generation 8 (Gen8)
Technical Specifications
HP Dynamic Smart
Dimensions
Array B120i Controller Disk Drive Interface Transfer rate
SATA Connectors
Server Interface
SATA Speed
Cache Memory
Logical Drives
Supported
Host Memory
Addressing
Hot Plug Support
RAID Support
HP Dynamic Smart
Dimensions
Array B320i Controller Disk Drive Interface Transfer rate
Connectors
Server Interface
Speed
Cache Memory
Logical Drives
Supported
Host Memory
Addressing
Hot Plug Support
RAID Support
Embedded
3Gb/s SATA (Serial Attached SCSI)
6 internal connectors w/hot plug support
Intel® C600 Series Chipset integrated SATA controller
3Gb/s SATA links
optional 40-bit 512MB ECC protected Flash Backed Write Cache
(FBWC)
Zero Memory, Up to 2 logical volumes (6 physical drives)
64-bit, supporting greater than 4GB server memory space
Yes
RAID 0 (Striping), RAID 1 (Mirroring)
RAID 1+0 (Striping & Mirroring)
RAID 5 with optional 512MB FBWC
NOTE: 512 MB cache is required to enable RAID 5 support
Embedded
Up to 6Gb/s SAS (Serial Attached SCSI)
Up to 6Gb/s SATA (Serial ATA)
2 internal 4X connectors
x4 PCIe 2.0 provides 4GB/s maximum bandwidth
8 x 6Gb/s SAS links provide 4.8GB/s maximum bandwidth
Zero Memory RAID has no cache memory
optional 40-bit 512MB ECC protected Flash Backed Write Cache
(FBWC)
Zero Memory, Up to 2 logical volumes (8 physical drives)
Up to 64 logical drives with cache
64-bit, supporting greater than 4GB server memory space
Yes
RAID 0 (Striping), RAID 1 (Mirroring)
RAID 1+0 (Striping & Mirroring)
RAID 5 with optional 512MB FBWC
NOTE: 512 MB cache is required to enable RAID 5 support
DA - 14328 Worldwide QuickSpecs — Version 2 — 6/8/2012
Page 53
QuickSpecs
HP ProLiant DL380e Generation 8 (Gen8)
Technical Specifications
HP Smart Array P420i Dimensions
Controller
Disk Drive and
Enclosure Interface transfer rate
SAS Connectors
Cache Memory Speed
Server Interface
SAS Speed
Cache Memory
Logical Drives
Supported
Host Memory
Addressing
RAID Support
Embedded
6Gb/s SAS (Serial Attached SCSI)
3Gb/s SATA (Serial ATA)
2 internal 4X connectors
DDR2-800MHz with 40 or 72-bit wide bus
x4 PCIe 2.0 provides 2GB/s maximum bandwidth
8 6Gb/s SAS links provide 4.8GB/s maximum bandwidth
Zero Memory RAID has no cache memory
40-bit 256MB ECC protected cache (battery upgrade available)
72-bit 512MB BBWC or 72-bit 512MB and 1G FBWC
Zero Memory, Up to 2 logical volumes (8 physical drives)
Up to 64 logical drives with cache
64-bit, supporting greater than 4GB server memory space
RAID 6, 6+0 (Advanced Data Guarding)
NOTE: RAID 6, 6+0 can be enabled with one of the following
combinations:
256 MB cache, Battery kit and Smart Array Advanced Pack
License key option upgrades
512 MB BBWC/FBWC and Smart Array Advanced Pack License
key option upgrades
1G FBWC and Smart Array Advanced Pack License key option
upgrades
RAID 5, 5+0 (Distributed Data Guarding)
NOTE: A minimum or 256 MB cache is required to enable RAID 5, 5+0
support
RAID 1+0 (Striping & Mirroring)
RAID 0 (Striping), RAID 1 (Mirroring)
HP Ethernet 1Gb 4-port Network Interface
366i Adapter
Compatibility
10Base-T/100Base-TX/1000Base-TX
EEE 802.3 10Base-T
IEEE 802.3ab 1000Base-T
IEEE 802.3u 100Base-TX
IEEE 1588, IEEE 802.1AS
IEEE 802.3az - Energy Efficient Ethernet (EEE)
Data Transfer Method PCI Express v 2.0, 5.0 GT/s, two lanes (x2)
Controller
I350 Powerville
Number of Ports
4
Network Transfer Rate 10Base-T (Half-Duplex) 10 Mb/s per port, 40 Mb/s combined
10Base-T (Full-Duplex) 20 Mb/s per port , 80 Mb/s combined
100Base-TX (Half100 Mb/s per port, 400 Mb/s combine
Duplex)
100Base-TX (Full200 Mb/s per port, 800 Mb/s combined
Duplex)
1000Base-TX (Half and 1000Mb/s per port, 4000 Mb/s combined
Full-Duplex)
Connector
Two RJ-45
DA - 14328 Worldwide QuickSpecs — Version 2 — 6/8/2012
Page 54
QuickSpecs
HP ProLiant DL380e Generation 8 (Gen8)
Technical Specifications
Cable Support
10Base-T
10/100/1000Base-TX
Environment-friendly
Products and
Approach
End-of-life
Management and
Recycling
Categories 3, 4 or 5 UTP;
up to 328 ft (100 m)
Category 5 or higher UTP;
up to 328 ft (100 m)
Hewlett-Packard offers end-of-life HP product return, trade-in, and
recycling programs in many geographic areas. For trade-in information,
please go to: http://www.hp.com/go/green. To recycle your product,
please go to: http://www.hp.com/go/green or contact your nearest HP
sales office. Products returned to HP will be recycled, recovered or
disposed of in a responsible manner.
The EU WEEE directive (2002/95/EC) requires manufacturers to
provide treatment information for each product type for use by treatment
facilities. This information (product disassembly instructions) is posted
on the Hewlett Packard web site at: http://www.hp.com/go/green. These
instructions may be used by recyclers and other WEEE treatment
facilities as well as HP OEM customers who integrate and re-sell HP
equipment.
© Copyright 2012 Hewlett-Packard Development Company, L.P.
The information contained herein is subject to change without notice.
Microsoft and Windows NT are US registered trademarks of Microsoft Corporation.
Intel, the Intel logo, Xeon and Xeon Inside are trademarks of Intel Corporation in the U.S. and other countries.
The only warranties for HP products and services are set forth in the express warranty statements accompanying such
products and services. Nothing herein should be construed as constituting an additional warranty. HP shall not be liable for
technical or editorial errors or omissions contained herein.
For hard drives, 1GB = 1 billion bytes. Actual formatted capacity is less.
DA - 14328 Worldwide QuickSpecs — Version 2 — 6/8/2012
Page 55
Download PDF
Similar pages